Πρόβλημα ή bug του ναυτίλου στο proc

[sotos21]

Δεν ξέρω αν είναι πρόβλημα του δίσκου ή bug του ναυτίλου, αλλά επειδή δεν το κάνει σε live 14.10 είπα να ποστάρω εδώ.
Παλιά όταν άνοιγα τον φάκελο proc σαν απλός χρήστης άνοιγε κανονικά(σαν root δεν άνοιγε ποτέ)
Τώρα σαν απλός χρήστης όχι μόνο δεν ανοίγει αλλά παγώνει το λειτουργικό και αναγκάζομαι να τον κλείσω από το κουμπί (ούτε "ακούει" αν επιχειρήσω να βγω σε κονσόλα)
Το παρουσιάζει σε 14.10 και 15.04 και με 3.16 και με 3.18 kernel.

Κώδικας: Επιλογή όλων

sotiris@ubuntu:~$ sudo smartctl -a /dev/sdb
[sudo] password for sotiris:
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.18.0-997-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 840 EVO 120GB
Serial Number: S1D5NSAF597736D
LU WWN Device Id: 5 002538 8a0452192
Firmware Version: EXT0CB6Q
User Capacity: 120.034.123.776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Nov 22 21:37:43 2014 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4200) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 70) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1025
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 404
177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 3
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 075 059 000 Old_age Always - 25
195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0
199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 71
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 964684833

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

sotiris@ubuntu:~$

Η ανάγνωση των /var/log/ μετά από επανεκκίνηση είτε από 14.10 είτε από 15.04 πέφτει στο κενό διότι επειδή πάνε όλα τα logs στην ram, οι φάκελοι είναι κενοί.

Εδώ είναι η αναφορά του bug Launchpad bug: #1395880

[the_eye]

Άνοιξε τον ναυτίλο από τερματικό και μετά πήγαινε στον φάκελο που κολλάει. Βάλε κάπου το τερματικό έτσι ώστε να δεις αν βγάλει κάποιο μήνυμα και δώσε μας screenshot.

Ο δίσκος φαίνεται οκ

[sotos21]

Μια και ο δίσκος φαίνεται εντάξει κάτσε να πάω σε 14.10 γιατί εδώ που είμαι(15.04) έβγαλε το τερματικό

Κώδικας: Επιλογή όλων

sotiris@ubuntu:~$ nautilus

** (nautilus:7978): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
sotiris@ubuntu:~$

Έκλεισε δηλαδή τη διεργασία του, χωρίς όμως να κλείσει ο nautilus που άνοιξε το τερματικό.
Επανέρχομαι.

[sotos21]

Κάτι δεν πάει καλά και στην 14.10 σταματάει το τερματικό χωρίς να κλείνει την εφαρμογή που άνοιξε.

Κώδικας: Επιλογή όλων

sotiris@ubuntu:~$ nautilus
sotiris@ubuntu:~$

Παλιά έβγαζε

Κώδικας: Επιλογή όλων

sotiris@ubuntu:~$ nautilus
Initializing nautilus-open-terminal extension

και παρέμενε έτσι μέχρι να κλείσω την εφαρμογή.
Τώρα βέβαια δεν ξέρω τι screenshot ζητάς, αφού όπως σου είπα δεν ακούει τίποτα από το πληκτρολόγιο.

[the_eye]

screenshot από φωτογραφική

[sotos21]

screenshot από φωτογραφική

Για να δεις τι βρε the_eye την επιφάνεια εργασίας μου, αφού κολλάει σου λέω.
Έχω ανοίξει την top την intel_gpu_top και την conky σε τρία διαφορετικά τερματικά.
Το μόνο που "έδειξε" κάτι πριν κολλήσει, είναι το τερματικό με το conky που έγραψε ότι δεν μπορεί να διαβάσει την θερμοκρασία από την /sys/class/hwmon
Επίσης μέχρι να γράψει το τερματικό με το conky το παραπάνω, ανεβαίνει η θερμοκρασία στους 50 βαθμούς από 35, χωρίς να ανέβει η χρήση ούτε gpu ούτε cpu.(ούτε και η χρήση σε κάποια επιμέρους διεργασία)
Τα παραπάνω τα παρατηρώ για 4 sec μέχρι να κολλήσουν τα πάντα και συμβαίνει όχι ακριβώς όταν ανοίγω τον ναυτίλο για να δω τον φάκελο proc αλλά όταν κλείσω τον ναυτίλο(αφού δεν μου δείχνει κάτι)
Μήπως μου προτείνεις να επαναφέρω το /var/log/ στο δίσκο από την μνήμη που είναι τώρα και να δούμε τα μηνύματα του πυρήνα;
Edit: Σε εσένα αν γράψεις nautilus στο τερματικό (σε 14.10) μένει ανοικτό ή "κλείνει" όπως σε εμένα.

[the_eye]

Δεν έχω κάπου 14.10

Για δοκίμασε

Κώδικας: Επιλογή όλων

nautilus -c

[sotos21]

Ορίστε

Κώδικας: Επιλογή όλων

sotiris@ubuntu:~$ nautilus -c
running nautilus_self_check_file_utilities
running nautilus_self_check_file_operations
running nautilus_self_check_directory
running nautilus_self_check_file
running nautilus_self_check_canvas_container
running nautilus_self_check_file_utilities
running nautilus_self_check_file_operations
running nautilus_self_check_directory
running nautilus_self_check_file
running nautilus_self_check_canvas_container
sotiris@ubuntu:~$

Δεν ανοίγει κάποια εφαρμογή.
Μήπως χαλάμε εδώ τον οδηγό και πρέπει να μεταφέρουμε αλλού τα σχόλια εφόσον δεν είναι πρόβλημα δίσκου;

Edit: Κάνει τα ίδια και σε συνεδρία guest οπότε δεν τίθεται θέμα ρυθμίσεων χρήστη.

[sotos21]

Μήπως μου προτείνεις να επαναφέρω το /var/log/ στο δίσκο από την μνήμη που είναι τώρα και να δούμε τα μηνύματα του πυρήνα;

Κώδικας: Επιλογή όλων

[ 4.094]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 4.094] X Protocol Version 11, Revision 0
[ 4.094] Build Operating System: Linux 3.2.0-61-generic x86_64 Ubuntu
[ 4.094] Current Operating System: Linux ubuntu 3.16.0-24-generic #32-Ubuntu SMP Tue Oct 28 13:07:32 UTC 2014 x86_64
[ 4.094] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic.efi.signed root=UUID=e1242f5c-d737-4d6a-bb23-60233bcf572f ro quiet splash vt.handoff=7
[ 4.094] Build Date: 10 September 2014 01:10:01PM
[ 4.094] xorg-server 2:1.16.0-1ubuntu1 (For technical support please see http://www.ubuntu.com/support)
[ 4.094] Current version of pixman: 0.32.4
[ 4.094] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.094] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.095] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 4 23:14:04 2014
[ 4.095] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.096] (==) No Layout section. Using the first Screen section.
[ 4.096] (==) No screen section available. Using defaults.
[ 4.096] (**) |-->Screen "Default Screen Section" (0)
[ 4.096] (**) | |-->Monitor "<default monitor>"
[ 4.096] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.096] (==) Automatically adding devices
[ 4.096] (==) Automatically enabling devices
[ 4.096] (==) Automatically adding GPU devices
[ 4.097] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 4.097] Entry deleted from font path.
[ 4.097] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 4.097] Entry deleted from font path.
[ 4.097] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 4.097] Entry deleted from font path.
[ 4.097] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 4.097] Entry deleted from font path.
[ 4.097] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 4.097] Entry deleted from font path.
[ 4.097] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 4.097] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 4.097] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.097] (II) Loader magic: 0x7f4e0bd6dd80
[ 4.097] (II) Module ABI versions:
[ 4.097] X.Org ANSI C Emulation: 0.4
[ 4.097] X.Org Video Driver: 18.0
[ 4.097] X.Org XInput driver : 21.0
[ 4.097] X.Org Server Extension : 8.0
[ 4.097] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.098] (--) PCI:*(0:0:2:0) 8086:0a16:104d:90be rev 9, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00004000/64
[ 4.099] (II) LoadModule: "glx"
[ 4.100] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.109] (II) Module glx: vendor="X.Org Foundation"
[ 4.109] compiled for 1.16.0, module version = 1.0.0
[ 4.109] ABI class: X.Org Server Extension, version 8.0
[ 4.109] (==) AIGLX enabled
[ 4.109] (==) Matched intel as autoconfigured driver 0
[ 4.109] (==) Matched intel as autoconfigured driver 1
[ 4.109] (==) Matched modesetting as autoconfigured driver 2
[ 4.109] (==) Matched fbdev as autoconfigured driver 3
[ 4.109] (==) Matched vesa as autoconfigured driver 4
[ 4.109] (==) Assigned the driver to the xf86ConfigLayout
[ 4.110] (II) LoadModule: "intel"
[ 4.110] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4.112] (II) Module intel: vendor="X.Org Foundation"
[ 4.112] compiled for 1.16.0, module version = 2.99.914
[ 4.112] Module class: X.Org Video Driver
[ 4.112] ABI class: X.Org Video Driver, version 18.0
[ 4.112] (II) LoadModule: "modesetting"
[ 4.113] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.114] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.114] compiled for 1.16.0, module version = 0.9.0
[ 4.114] Module class: X.Org Video Driver
[ 4.114] ABI class: X.Org Video Driver, version 18.0
[ 4.114] (II) LoadModule: "fbdev"
[ 4.114] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4.115] (II) Module fbdev: vendor="X.Org Foundation"
[ 4.115] compiled for 1.16.0, module version = 0.4.4
[ 4.115] Module class: X.Org Video Driver
[ 4.115] ABI class: X.Org Video Driver, version 18.0
[ 4.115] (II) LoadModule: "vesa"
[ 4.115] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.115] (II) Module vesa: vendor="X.Org Foundation"
[ 4.115] compiled for 1.16.0, module version = 2.3.3
[ 4.115] Module class: X.Org Video Driver
[ 4.115] ABI class: X.Org Video Driver, version 18.0
[ 4.115] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4.116] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 4.116] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 4.116] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 4.116] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.116] (II) FBDEV: driver for framebuffer: fbdev
[ 4.116] (II) VESA: driver for VESA chipsets: vesa
[ 4.116] (++) using VT number 7

[ 4.117] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 4.117] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4 (Maarten Lankhorst <maarten.lankhorst@ubuntu.com>)
[ 4.117] (II) intel(0): SNA compiled for use with valgrind
[ 4.117] (WW) Falling back to old probe method for modesetting
[ 4.117] (WW) Falling back to old probe method for fbdev
[ 4.117] (II) Loading sub module "fbdevhw"
[ 4.117] (II) LoadModule: "fbdevhw"
[ 4.118] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 4.118] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4.118] compiled for 1.16.0, module version = 0.0.2
[ 4.118] ABI class: X.Org Video Driver, version 18.0
[ 4.118] (WW) Falling back to old probe method for vesa
[ 4.119] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[ 4.119] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 4.119] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.119] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4.119] (==) intel(0): RGB weight 888
[ 4.119] (==) intel(0): Default visual is TrueColor
[ 4.119] (II) intel(0): Output eDP1 has no monitor section
[ 4.119] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 4.119] (II) intel(0): Output HDMI1 has no monitor section
[ 4.119] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 4.119] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 4.119] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 4.119] (==) intel(0): TearFree disabled
[ 4.119] (==) intel(0): DPI set to (96, 96)
[ 4.119] (II) Loading sub module "dri3"
[ 4.119] (II) LoadModule: "dri3"
[ 4.119] (II) Module "dri3" already built-in
[ 4.119] (II) Loading sub module "dri2"
[ 4.119] (II) LoadModule: "dri2"
[ 4.119] (II) Module "dri2" already built-in
[ 4.119] (II) Loading sub module "present"
[ 4.119] (II) LoadModule: "present"
[ 4.119] (II) Module "present" already built-in
[ 4.120] (II) UnloadModule: "modesetting"
[ 4.120] (II) Unloading modesetting
[ 4.120] (II) UnloadModule: "fbdev"
[ 4.120] (II) Unloading fbdev
[ 4.120] (II) UnloadSubModule: "fbdevhw"
[ 4.120] (II) Unloading fbdevhw
[ 4.120] (II) UnloadModule: "vesa"
[ 4.120] (II) Unloading vesa
[ 4.120] (==) Depth 24 pixmap format is 32 bpp
[ 4.123] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 4.123] (==) intel(0): Backing store enabled
[ 4.123] (==) intel(0): Silken mouse enabled
[ 4.123] (II) intel(0): HW Cursor enabled
[ 4.123] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4.124] (==) intel(0): DPMS enabled
[ 4.124] (II) intel(0): [DRI2] Setup complete
[ 4.124] (II) intel(0): [DRI2] DRI driver: i965
[ 4.124] (II) intel(0): [DRI2] VDPAU driver: i965
[ 4.124] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 4.124] (II) intel(0): hardware support for Present enabled
[ 4.124] (==) intel(0): display hotplug detection enabled
[ 4.124] (--) RandR disabled
[ 4.130] (II) SELinux: Disabled on system
[ 4.242] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4.242] (II) AIGLX: enabled GLX_ARB_create_context
[ 4.242] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4.242] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 4.242] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4.242] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4.242] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 4.242] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 4.242] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4.242] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 4.242] (II) AIGLX: Loaded and initialized i965
[ 4.242] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4.254] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 4.260] (II) intel(0): Setting screen physical size to 508 x 285
[ 4.283] (II) XKB: generating xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 4.389] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4.390] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.390] (II) LoadModule: "evdev"
[ 4.390] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4.391] (II) Module evdev: vendor="X.Org Foundation"
[ 4.391] compiled for 1.16.0, module version = 2.9.0
[ 4.391] Module class: X.Org XInput Driver
[ 4.391] ABI class: X.Org XInput driver, version 21.0
[ 4.391] (II) Using input driver 'evdev' for 'Power Button'
[ 4.391] (**) Power Button: always reports core events
[ 4.391] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 4.391] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.391] (--) evdev: Power Button: Found keys
[ 4.391] (II) evdev: Power Button: Configuring as keyboard
[ 4.391] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 4.391] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4.391] (**) Option "xkb_rules" "evdev"
[ 4.391] (**) Option "xkb_model" "pc105"
[ 4.391] (**) Option "xkb_layout" "us,gr"
[ 4.391] (**) Option "xkb_variant" ","
[ 4.391] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 4.393] (II) XKB: generating xkmfile /var/lib/xkb/server-9078D1F245FADE3CB4AD835262E1036C04792E56.xkm
[ 4.407] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 4.407] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4.407] (II) Using input driver 'evdev' for 'Video Bus'
[ 4.407] (**) Video Bus: always reports core events
[ 4.407] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 4.407] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4.407] (--) evdev: Video Bus: Found keys
[ 4.407] (II) evdev: Video Bus: Configuring as keyboard
[ 4.407] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event8"
[ 4.408] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4.408] (**) Option "xkb_rules" "evdev"
[ 4.408] (**) Option "xkb_model" "pc105"
[ 4.408] (**) Option "xkb_layout" "us,gr"
[ 4.408] (**) Option "xkb_variant" ","
[ 4.408] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 4.408] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event5)
[ 4.408] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 4.408] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[ 4.408] (**) Sony Vaio Keys: always reports core events
[ 4.408] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event5"
[ 4.408] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[ 4.408] (--) evdev: Sony Vaio Keys: Found keys
[ 4.408] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[ 4.408] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input6/event5"
[ 4.408] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 8)
[ 4.408] (**) Option "xkb_rules" "evdev"
[ 4.408] (**) Option "xkb_model" "pc105"
[ 4.408] (**) Option "xkb_layout" "us,gr"
[ 4.408] (**) Option "xkb_variant" ","
[ 4.408] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 4.408] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event6)
[ 4.408] (II) No input driver specified, ignoring this device.
[ 4.408] (II) This device may have been added with another device file.
[ 4.408] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse1)
[ 4.408] (II) No input driver specified, ignoring this device.
[ 4.408] (II) This device may have been added with another device file.
[ 4.409] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 4.409] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.409] (II) Using input driver 'evdev' for 'Power Button'
[ 4.409] (**) Power Button: always reports core events
[ 4.409] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 4.409] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.409] (--) evdev: Power Button: Found keys
[ 4.409] (II) evdev: Power Button: Configuring as keyboard
[ 4.409] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 4.409] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 4.409] (**) Option "xkb_rules" "evdev"
[ 4.409] (**) Option "xkb_model" "pc105"
[ 4.409] (**) Option "xkb_layout" "us,gr"
[ 4.409] (**) Option "xkb_variant" ","
[ 4.409] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 4.409] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 4.409] (II) No input driver specified, ignoring this device.
[ 4.409] (II) This device may have been added with another device file.
[ 4.409] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[ 4.409] (II) No input driver specified, ignoring this device.
[ 4.409] (II) This device may have been added with another device file.
[ 4.409] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event10)
[ 4.409] (II) No input driver specified, ignoring this device.
[ 4.409] (II) This device may have been added with another device file.
[ 4.409] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event11)
[ 4.409] (II) No input driver specified, ignoring this device.
[ 4.409] (II) This device may have been added with another device file.
[ 4.410] (II) config/udev: Adding input device Front Camera (/dev/input/event7)
[ 4.410] (**) Front Camera: Applying InputClass "evdev keyboard catchall"
[ 4.410] (II) Using input driver 'evdev' for 'Front Camera'
[ 4.410] (**) Front Camera: always reports core events
[ 4.410] (**) evdev: Front Camera: Device: "/dev/input/event7"
[ 4.410] (--) evdev: Front Camera: Vendor 0x4f2 Product 0xb42d
[ 4.410] (--) evdev: Front Camera: Found keys
[ 4.410] (II) evdev: Front Camera: Configuring as keyboard
[ 4.410] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input8/event7"
[ 4.410] (II) XINPUT: Adding extended input device "Front Camera" (type: KEYBOARD, id 10)
[ 4.410] (**) Option "xkb_rules" "evdev"
[ 4.410] (**) Option "xkb_model" "pc105"
[ 4.410] (**) Option "xkb_layout" "us,gr"
[ 4.410] (**) Option "xkb_variant" ","
[ 4.410] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 4.410] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/event14)
[ 4.410] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "evdev keyboard catchall"
[ 4.410] (II) Using input driver 'evdev' for 'MOSART Semi. 2.4G Keyboard Mouse'
[ 4.410] (**) MOSART Semi. 2.4G Keyboard Mouse: always reports core events
[ 4.410] (**) evdev: MOSART Semi. 2.4G Keyboard Mouse: Device: "/dev/input/event14"
[ 4.410] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Vendor 0x62a Product 0x4101
[ 4.410] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found keys
[ 4.410] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: Configuring as keyboard
[ 4.410] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:062A:4101.0001/input/input15/event14"
[ 4.410] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse" (type: KEYBOARD, id 11)
[ 4.410] (**) Option "xkb_rules" "evdev"
[ 4.410] (**) Option "xkb_model" "pc105"
[ 4.410] (**) Option "xkb_layout" "us,gr"
[ 4.410] (**) Option "xkb_variant" ","
[ 4.410] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 4.410] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/event15)
[ 4.410] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "evdev pointer catchall"
[ 4.410] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "evdev keyboard catchall"
[ 4.410] (II) Using input driver 'evdev' for 'MOSART Semi. 2.4G Keyboard Mouse'
[ 4.410] (**) MOSART Semi. 2.4G Keyboard Mouse: always reports core events
[ 4.410] (**) evdev: MOSART Semi. 2.4G Keyboard Mouse: Device: "/dev/input/event15"
[ 4.411] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Vendor 0x62a Product 0x4101
[ 4.411] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found 9 mouse buttons
[ 4.411] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found scroll wheel(s)
[ 4.411] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found relative axes
[ 4.411] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found x and y relative axes
[ 4.411] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found absolute axes
[ 4.411] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: Forcing absolute x/y axes to exist.
[ 4.411] (--) evdev: MOSART Semi. 2.4G Keyboard Mouse: Found keys
[ 4.411] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: Configuring as mouse
[ 4.411] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: Configuring as keyboard
[ 4.411] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: Adding scrollwheel support
[ 4.411] (**) evdev: MOSART Semi. 2.4G Keyboard Mouse: YAxisMapping: buttons 4 and 5
[ 4.411] (**) evdev: MOSART Semi. 2.4G Keyboard Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4.411] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.1/0003:062A:4101.0002/input/input16/event15"
[ 4.411] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse" (type: KEYBOARD, id 12)
[ 4.411] (**) Option "xkb_rules" "evdev"
[ 4.411] (**) Option "xkb_model" "pc105"
[ 4.411] (**) Option "xkb_layout" "us,gr"
[ 4.411] (**) Option "xkb_variant" ","
[ 4.411] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 4.411] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: initialized for relative axes.
[ 4.411] (WW) evdev: MOSART Semi. 2.4G Keyboard Mouse: ignoring absolute axes.
[ 4.411] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) keeping acceleration scheme 1
[ 4.411] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) acceleration profile 0
[ 4.411] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) acceleration factor: 2.000
[ 4.411] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) acceleration threshold: 4
[ 4.411] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/mouse2)
[ 4.411] (II) No input driver specified, ignoring this device.
[ 4.411] (II) This device may have been added with another device file.
[ 4.411] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 4.411] (II) No input driver specified, ignoring this device.
[ 4.411] (II) This device may have been added with another device file.
[ 4.411] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 4.411] (II) No input driver specified, ignoring this device.
[ 4.411] (II) This device may have been added with another device file.
[ 4.411] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 4.411] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4.411] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4.412] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.412] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 4.412] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4.412] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4.412] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4.412] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 4.412] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 4.412] (**) Option "xkb_rules" "evdev"
[ 4.412] (**) Option "xkb_model" "pc105"
[ 4.412] (**) Option "xkb_layout" "us,gr"
[ 4.412] (**) Option "xkb_variant" ","
[ 4.412] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 4.412] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 4.412] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 4.412] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 4.412] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 4.412] (II) LoadModule: "synaptics"
[ 4.412] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4.413] (II) Module synaptics: vendor="X.Org Foundation"
[ 4.413] compiled for 1.16.0, module version = 1.8.99
[ 4.413] Module class: X.Org XInput Driver
[ 4.413] ABI class: X.Org XInput driver, version 21.0
[ 4.413] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 4.413] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4.413] (**) Option "Device" "/dev/input/event4"
[ 4.460] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 4.460] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5666 (res 43)
[ 4.460] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4710 (res 58)
[ 4.460] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 4.460] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 4.460] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 4.460] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 4.460] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 4.460] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 4.460] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4.476] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[ 4.476] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 4.476] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 4.476] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 4.476] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 4.476] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 4.476] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 4.476] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 4.476] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 4.476] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 4.476] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 4.476] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 5.033] (II) intel(0): EDID vendor "CMN", prod id 5568
[ 5.033] (II) intel(0): Printing DDC gathered Modelines:
[ 5.033] (II) intel(0): Modeline "1920x1080"x0.0 151.60 1920 2010 2070 2220 1080 1086 1095 1138 -hsync -vsync (68.3 kHz eP)
[ 10.239] (II) XKB: generating xkmfile /var/lib/xkb/server-85EEB211744397D69807849BE0DE46757AFDF930.xkm
[ 10.309] (II) XKB: reuse xkmfile /var/lib/xkb/server-85EEB211744397D69807849BE0DE46757AFDF930.xkm
[ 10.464] (II) XKB: generating xkmfile /var/lib/xkb/server-4B5222C67A3D884FA83F353450B21CF9DCE9E004.xkm
[ 10.992] (II) XKB: generating xkmfile /var/lib/xkb/server-976FEF427A461AF5DC6561EB7F3A469E186554D3.xkm
[ 1281.017] (II) XKB: generating xkmfile /var/lib/xkb/server-0351965FFB28B3B44BD3ED04D81880FF217F5DF6.xkm
[ 1345.337] (II) XKB: reuse xkmfile /var/lib/xkb/server-85EEB211744397D69807849BE0DE46757AFDF930.xkm
[ 1725.620] (II) UnloadModule: "synaptics"
[ 1725.620] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1725.620] (II) UnloadModule: "evdev"
[ 1725.620] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: Close
[ 1725.620] (II) UnloadModule: "evdev"
[ 1725.620] (II) evdev: MOSART Semi. 2.4G Keyboard Mouse: Close
[ 1725.620] (II) UnloadModule: "evdev"
[ 1725.620] (II) evdev: Front Camera: Close
[ 1725.620] (II) UnloadModule: "evdev"
[ 1725.620] (II) evdev: Power Button: Close
[ 1725.620] (II) UnloadModule: "evdev"
[ 1725.620] (II) evdev: Sony Vaio Keys: Close
[ 1725.620] (II) UnloadModule: "evdev"
[ 1725.620] (II) evdev: Video Bus: Close
[ 1725.620] (II) UnloadModule: "evdev"
[ 1725.620] (II) evdev: Power Button: Close
[ 1725.620] (II) UnloadModule: "evdev"
[ 1725.621] (EE)
[ 1725.621] (EE) Backtrace:
[ 1725.622] (EE) 0: /usr/bin/X (xorg_backtrace+0x56) [0x7f4e0bae6666]
[ 1725.622] (EE) 1: /usr/bin/X (0x7f4e0b930000+0x1ba869) [0x7f4e0baea869]
[ 1725.622] (EE) 2: /lib/x86_64-linux-gnu/libc.so.6 (0x7f4e09664000+0x36da0) [0x7f4e0969ada0]
[ 1725.622] (EE) 3: /usr/bin/X (0x7f4e0b930000+0x1378ec) [0x7f4e0ba678ec]
[ 1725.622] (EE) 4: /usr/bin/X (0x7f4e0b930000+0x137d0c) [0x7f4e0ba67d0c]
[ 1725.622] (EE) 5: /usr/bin/X (0x7f4e0b930000+0x137243) [0x7f4e0ba67243]
[ 1725.622] (EE) 6: /usr/bin/X (0x7f4e0b930000+0xe9fa8) [0x7f4e0ba19fa8]
[ 1725.622] (EE) 7: /usr/bin/X (0x7f4e0b930000+0x1358fc) [0x7f4e0ba658fc]
[ 1725.622] (EE) 8: /usr/bin/X (0x7f4e0b930000+0x5b3b7) [0x7f4e0b98b3b7]
[ 1725.622] (EE) 9: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0x7f4e09685ec5]
[ 1725.622] (EE) 10: /usr/bin/X (0x7f4e0b930000+0x456ae) [0x7f4e0b9756ae]
[ 1725.622] (EE)
[ 1725.622] (EE) Segmentation fault at address 0x10
[ 1725.622] (EE)
Fatal server error:
[ 1725.622] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 1725.622] (EE)
[ 1725.622] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1725.622] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 1725.622] (EE)

Στο dmesg και στο kernel.log δεν είδα κάτι.

[the_eye]

Διαχώρισα το θέμα.
Με alt+ctrl+f1 βγαίνεις σε τερματικό ;