Πρόβλημα εκκίνησης Lubuntu

[anonymouscy]

Γειά χαρά.

Εγκατέστησα το Lubuntu στο φορητό υπολογιστή μου. Όλα μια χαρά εκτός από ένα θεματάκι: Όταν πατάω το κουμπί να ανοίξει, δουλεύει κανονικά ο σκληρός χωρίς να βγάλει τίποτα στην οθόνη και μετά από λίγο αδρανοποιείτε (κατάσταση standby). Ξαναπατάω το κουμπί και τότε ανοίγει κανονικά.

Μπορεί να μου πει κάποιος γιατί συμβαίνει αυτό;

[Logan]

Καλησπέρα, θα ήταν χρήσιμο να μας δώσεις την έξοδο της εντολής dmesg, επίσης καλό θα ήτανε να έφτιαχνες την υπογραφή σου για να γνωρίζουμε το βασικές πληροφορίες για το μηχάνημα σου.

[anonymouscy]

Ευχαριστώ για την απάντηση.

Έχω φτιάξει την υπογραφή μου. Στην εντολή που έγραψες στο τερματικό μου βγάζει ένα κατεβατό, να τα αντιγράψω εδώ;

[koleygr]

...να τα αντιγράψω εδώ;

αντιγραψέ το και βαλε το μεσα σε code (Προβολή κώδικα)

(Ενα απο τα κουμπάκια πανω απο το κείμενο όταν γράφεις...
μαρκάρεις τον κώδικα και το πατας)

[anonymouscy]

Κώδικας: Επιλογή όλων

[ 0.152371] ACPI: Interpreter enabled
[ 0.152394] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.152405] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.152442] ACPI: (supports S0 S3 S4 S5)
[ 0.152448] ACPI: Using IOAPIC for interrupt routing
[ 0.152534] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.166021] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.166040] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.166055] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.167780] PCI host bridge to bus 0000:00
[ 0.167791] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.167798] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.167805] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.167811] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.167818] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.167824] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.167830] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.167837] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.167843] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[ 0.167865] pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
[ 0.168136] pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
[ 0.168157] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf007ffff]
[ 0.168168] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
[ 0.168180] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.168191] pci 0000:00:02.0: reg 0x1c: [mem 0xf0400000-0xf043ffff]
[ 0.168438] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.168455] pci 0000:00:02.1: reg 0x10: [mem 0xf0080000-0xf00fffff]
[ 0.168754] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.168789] pci 0000:00:1b.0: reg 0x10: [mem 0xf0440000-0xf0443fff 64bit]
[ 0.168926] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.169032] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.169197] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.169344] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.169599] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.169744] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.170004] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.170074] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.170251] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.170411] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.170481] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.170647] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.170806] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.170876] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 0.171126] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.171196] pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f]
[ 0.171466] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.171502] pci 0000:00:1d.7: reg 0x10: [mem 0xf0644000-0xf06443ff]
[ 0.171639] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.171738] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.171906] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.172224] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.172351] pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
[ 0.172363] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.172371] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.172379] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
[ 0.172635] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
[ 0.172665] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.172682] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.172699] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.172715] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.172732] pci 0000:00:1f.2: reg 0x20: [io 0x1810-0x181f]
[ 0.172764] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.172770] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.172776] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.172782] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.172828] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.173068] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.173145] pci 0000:00:1f.3: reg 0x20: [io 0x18a0-0x18bf]
[ 0.173593] pci 0000:02:00.0: [1969:1062] type 00 class 0x020000
[ 0.173640] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
[ 0.173662] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.173835] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.173902] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.180046] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.180057] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.180068] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.180278] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.180323] pci 0000:03:00.0: reg 0x10: [mem 0xf0200000-0xf020ffff 64bit]
[ 0.180518] pci 0000:03:00.0: supports D1
[ 0.180524] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.180593] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.188035] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.188049] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.188203] pci 0000:0a:09.0: [1180:0822] type 00 class 0x080500
[ 0.188235] pci 0000:0a:09.0: reg 0x10: [mem 0xf0300000-0xf03000ff]
[ 0.188362] pci 0000:0a:09.0: supports D1 D2
[ 0.188369] pci 0000:0a:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188547] pci 0000:0a:09.1: [1180:0592] type 00 class 0x088000
[ 0.188579] pci 0000:0a:09.1: reg 0x10: [mem 0xf0300400-0xf03004ff]
[ 0.188704] pci 0000:0a:09.1: supports D1 D2
[ 0.188710] pci 0000:0a:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188919] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[ 0.188932] pci 0000:00:1e.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.188946] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.188952] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.188959] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.188965] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.188972] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.188978] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.188985] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.188991] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.189032] pci_bus 0000:00: on NUMA node 0
[ 0.189323] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.189486] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 0.189643] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.189801] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.189959] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.190117] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.190276] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.190433] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.192000] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.192104] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.192413] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.192413] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.192413] vgaarb: loaded
[ 0.192413] vgaarb: bridge control possible 0000:00:02.0
[ 0.193073] SCSI subsystem initialized
[ 0.193184] libata version 3.00 loaded.
[ 0.193184] ACPI: bus type USB registered
[ 0.193184] usbcore: registered new interface driver usbfs
[ 0.193184] usbcore: registered new interface driver hub
[ 0.193184] usbcore: registered new device driver usb
[ 0.193184] PCI: Using ACPI for IRQ routing
[ 0.203622] PCI: pci_cache_line_size set to 64 bytes
[ 0.203719] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.203726] e820: reserve RAM buffer [mem 0x3f6d0000-0x3fffffff]
[ 0.204158] NetLabel: Initializing
[ 0.204164] NetLabel: domain hash size = 128
[ 0.204167] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.204198] NetLabel: unlabeled traffic allowed by default
[ 0.204295] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.204295] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.204295] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.206255] Switched to clocksource hpet
[ 0.223967] AppArmor: AppArmor Filesystem Enabled
[ 0.224252] pnp: PnP ACPI init
[ 0.224561] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.224570] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.224578] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.224585] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.224592] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.224599] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.224607] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.224614] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.224624] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.225251] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.225260] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.225268] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.225276] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.225283] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.225290] system 00:01: [io 0x1640-0x164f] has been reserved
[ 0.225297] system 00:01: [io 0xfe00-0xfe01] has been reserved
[ 0.225307] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.225448] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.225578] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.225753] pnp 00:04: Plug and Play ACPI device, IDs SNY9008 PNP0f13 (active)
[ 0.225906] pnp: PnP ACPI: found 5 devices
[ 0.225921] PnPBIOS: Disabled by ACPI PNP
[ 0.269216] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.269239] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.269248] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.269275] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 0.269285] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.269293] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.269300] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.269326] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.269346] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.269358] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.269366] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.269375] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.269386] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.269396] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.269408] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.269416] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.269426] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.269436] pci 0000:00:1c.1: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.269448] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[ 0.269459] pci 0000:00:1e.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.269475] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.269482] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.269488] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.269494] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.269501] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.269507] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.269513] pci_bus 0000:00: resource 10 [mem 0x000e4000-0x000e7fff]
[ 0.269520] pci_bus 0000:00: resource 11 [mem 0x40000000-0xfebfffff]
[ 0.269527] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.269533] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.269540] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.269546] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.269553] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.269559] pci_bus 0000:03: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.269566] pci_bus 0000:0a: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.269572] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.269578] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.269585] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.269591] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.269597] pci_bus 0000:0a: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.269603] pci_bus 0000:0a: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.269610] pci_bus 0000:0a: resource 10 [mem 0x000e4000-0x000e7fff]
[ 0.269616] pci_bus 0000:0a: resource 11 [mem 0x40000000-0xfebfffff]
[ 0.269685] NET: Registered protocol family 2
[ 0.270188] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.270235] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.270292] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.270340] TCP: reno registered
[ 0.270348] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.270365] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.270487] NET: Registered protocol family 1
[ 0.270533] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.273071] PCI: CLS 64 bytes, default 64
[ 0.273225] Trying to unpack rootfs image as initramfs...
[ 1.178663] Freeing initrd memory: 20908K (f571a000 - f6b85000)
[ 1.178929] Simple Boot Flag at 0x36 set to 0x1
[ 1.179384] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212
[ 1.179407] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
[ 1.179601] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.179701] Scanning for low memory corruption every 60 seconds
[ 1.180738] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.180773] Initialise system trusted keyring
[ 1.180842] audit: initializing netlink subsys (disabled)
[ 1.180888] audit: type=2000 audit(1442760402.180:1): initialized
[ 1.181729] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.189004] zpool: loaded
[ 1.189012] zbud: loaded
[ 1.189274] VFS: Disk quotas dquot_6.5.2
[ 1.189421] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.191359] fuse init (API version 7.23)
[ 1.191950] Key type big_key registered
[ 1.193246] Key type asymmetric registered
[ 1.193258] Asymmetric key parser 'x509' registered
[ 1.193306] bounce: pool size: 64 pages
[ 1.193464] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.193580] io scheduler noop registered
[ 1.193592] io scheduler deadline registered (default)
[ 1.193730] io scheduler cfq registered
[ 1.195040] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.195111] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.195237] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 1.195241] vesafb: scrolling: redraw
[ 1.195247] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.195294] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 3072k, total 3072k
[ 1.195649] Console: switching to colour frame buffer device 128x48
[ 1.195696] fb0: VESA VGA frame buffer device
[ 1.195776] intel_idle: MWAIT substates: 0x20220
[ 1.195794] intel_idle: v0.4 model 0x1C
[ 1.195800] intel_idle: lapic_timer_reliable_states 0x2
[ 1.195814] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.196394] ACPI: AC Adapter [ACAD] (off-line)
[ 1.196730] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.196789] ACPI: Lid Switch [LID]
[ 1.196957] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.196967] ACPI: Power Button [PWRB]
[ 1.197127] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.197135] ACPI: Power Button [PWRF]
[ 1.205235] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.205244] ACPI: Thermal Zone [TZ01] (40 C)
[ 1.205384] GHES: HEST is not enabled!
[ 1.205783] isapnp: Scanning for PnP cards...
[ 1.208206] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.219503] Linux agpgart interface v0.103
[ 1.219752] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.219808] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.219899] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.220263] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.231125] brd: module loaded
[ 1.237143] loop: module loaded
[ 1.238549] ata_piix 0000:00:1f.2: version 2.13
[ 1.238927] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.314610] ACPI: Battery Slot [BAT1] (battery present)
[ 1.395209] scsi host0: ata_piix
[ 1.395644] scsi host1: ata_piix
[ 1.395903] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.395911] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.396425] libphy: Fixed MDIO Bus: probed
[ 1.396436] tun: Universal TUN/TAP device driver, 1.6
[ 1.396441] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.396860] PPP generic driver version 2.4.2
[ 1.397229] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.397248] ehci-pci: EHCI PCI platform driver
[ 1.397733] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.397758] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.397788] ehci-pci 0000:00:1d.7: debug port 1
[ 1.401753] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.401826] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0644000
[ 1.401941] ata2: port disabled--ignoring
[ 1.412057] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.412282] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.412291] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.412299] usb usb1: Product: EHCI Host Controller
[ 1.412307] usb usb1: Manufacturer: Linux 3.19.0-15-generic ehci_hcd
[ 1.412314] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.412925] hub 1-0:1.0: USB hub found
[ 1.412963] hub 1-0:1.0: 8 ports detected
[ 1.414377] ehci-platform: EHCI generic platform driver
[ 1.414441] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.414461] ohci-pci: OHCI PCI platform driver
[ 1.414532] ohci-platform: OHCI generic platform driver
[ 1.414580] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.414992] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.415017] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.415035] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.415075] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.415288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.415297] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.415304] usb usb2: Product: UHCI Host Controller
[ 1.415312] usb usb2: Manufacturer: Linux 3.19.0-15-generic uhci_hcd
[ 1.415319] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.415857] hub 2-0:1.0: USB hub found
[ 1.415886] hub 2-0:1.0: 2 ports detected
[ 1.416748] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.416771] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.416793] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.416866] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.417079] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.417089] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.417096] usb usb3: Product: UHCI Host Controller
[ 1.417104] usb usb3: Manufacturer: Linux 3.19.0-15-generic uhci_hcd
[ 1.417111] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.417681] hub 3-0:1.0: USB hub found
[ 1.417709] hub 3-0:1.0: 2 ports detected
[ 1.418582] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.418610] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.418627] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.418696] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.418905] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.418914] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.418921] usb usb4: Product: UHCI Host Controller
[ 1.418929] usb usb4: Manufacturer: Linux 3.19.0-15-generic uhci_hcd
[ 1.418936] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.419480] hub 4-0:1.0: USB hub found
[ 1.419509] hub 4-0:1.0: 2 ports detected
[ 1.420356] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.420381] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.420399] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.420470] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.420682] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.420691] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.420698] usb usb5: Product: UHCI Host Controller
[ 1.420706] usb usb5: Manufacturer: Linux 3.19.0-15-generic uhci_hcd
[ 1.420713] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.421257] hub 5-0:1.0: USB hub found
[ 1.421285] hub 5-0:1.0: 2 ports detected
[ 1.421968] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.424326] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.424343] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.424987] mousedev: PS/2 mouse device common for all mice
[ 1.425733] rtc_cmos 00:02: RTC can wake from S4
[ 1.426100] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.426158] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.426203] i2c /dev entries driver
[ 1.426437] device-mapper: uevent: version 1.0.3
[ 1.426787] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 1.426919] platform eisa.0: Probing EISA bus 0
[ 1.426930] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.426940] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.426949] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.426958] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.426968] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.426977] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.426986] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.426995] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.427005] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.427012] platform eisa.0: EISA: Detected 0 cards
[ 1.427062] cpufreq-nforce2: No nForce2 chipset.
[ 1.427087] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.427111] PCCT header not found.
[ 1.427115] ACPI PCC probe failed.
[ 1.427475] TCP: cubic registered
[ 1.428204] NET: Registered protocol family 10
[ 1.428866] NET: Registered protocol family 17
[ 1.428906] Key type dns_resolver registered
[ 1.429688] Using IPI No-Shortcut mode
[ 1.430277] Loading compiled-in X.509 certificates
[ 1.443256] Loaded X.509 cert 'Magrathea: Glacier signing key: 9b23c11a9a02c71e89328f2ab21d0a23af16d7ed'
[ 1.443319] registered taskstats version 1
[ 1.451342] Key type trusted registered
[ 1.464114] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.467181] Key type encrypted registered
[ 1.467204] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.467216] ima: No TPM chip found, activating TPM-bypass!
[ 1.467290] evm: HMAC attrs: 0x1
[ 1.468599] Magic number: 15:242:789
[ 1.468781] rtc_cmos 00:02: setting system clock to 2015-09-20 14:46:43 UTC (1442760403)
[ 1.470039] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.470047] EDD information not available.
[ 1.470420] PM: Hibernation image not present or could not be loaded.
[ 1.517039] isapnp: No Plug & Play device found
[ 1.560556] ata1.00: ATA-8: TOSHIBA MK2555GSX, FG001A, max UDMA/100
[ 1.560571] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.568597] ata1.00: configured for UDMA/100
[ 1.569028] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2555GS 1A PQ: 0 ANSI: 5
[ 1.569701] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.569894] sd 0:0:0:0: [sda] Write Protect is off
[ 1.569906] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.569912] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.569997] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.591812] sda: sda1 sda2 < sda5 >
[ 1.593036] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.593758] Freeing unused kernel memory: 888K (c1a93000 - c1b71000)
[ 1.593924] Write protecting the kernel text: 7112k
[ 1.594138] Write protecting the kernel read-only data: 3000k
[ 1.594143] NX-protecting the kernel data: 5176k
[ 1.630929] random: systemd-udevd urandom read with 27 bits of entropy available
[ 1.784778] sdhci: Secure Digital Host Controller Interface driver
[ 1.784786] sdhci: Copyright(c) Pierre Ossman
[ 1.808492] sdhci-pci 0000:0a:09.0: SDHCI controller found [1180:0822] (rev 22)
[ 1.808709] sdhci-pci 0000:0a:09.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.808729] sdhci-pci 0000:0a:09.0: No vmmc regulator found
[ 1.808737] sdhci-pci 0000:0a:09.0: No vqmmc regulator found
[ 1.810206] mmc0: SDHCI controller on PCI [0000:0a:09.0] using DMA
[ 1.833125] atl1c 0000:02:00.0: version 1.0.1.1-NAPI
[ 1.916166] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 1.984144] usb 1-8: new high-speed USB device number 3 using ehci-pci
[ 2.090249] usb 3-2: New USB device found, idVendor=044e, idProduct=3017
[ 2.090265] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.090275] usb 3-2: Product: BCM2046 Bluetooth Device
[ 2.090283] usb 3-2: Manufacturer: Broadcom Corp
[ 2.090291] usb 3-2: SerialNumber: 002643AA8623
[ 2.120418] usb 1-8: New USB device found, idVendor=04f2, idProduct=b172
[ 2.120427] usb 1-8: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 2.120434] usb 1-8: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.489394] psmouse serio1: synaptics: queried max coordinates: x [..5724], y [..4996]
[ 2.516623] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04751/0xa00000/0x20000, board id: 0, fw id: 564372
[ 2.551692] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.634820] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 3.360488] random: nonblocking pool is initialized
[ 3.542919] systemd[1]: Inserted module 'autofs4'
[ 3.670549] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 3.671025] systemd[1]: Detected architecture x86.
[ 3.700483] systemd[1]: Set hostname to <Sony-Vaio-PCG>.
[ 4.150312] systemd[1]: Reached target Encrypted Volumes.
[ 4.150362] systemd[1]: Starting Encrypted Volumes.
[ 4.151013] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.151068] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.151221] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.151259] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.151338] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.151373] systemd[1]: Starting Remote File Systems (Pre).
[ 4.151502] systemd[1]: Created slice Root Slice.
[ 4.151541] systemd[1]: Starting Root Slice.
[ 4.183621] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.183676] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 4.183792] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.183833] systemd[1]: Starting fsck to fsckd communication Socket.
[ 4.183953] systemd[1]: Listening on Journal Audit Socket.
[ 4.183990] systemd[1]: Starting Journal Audit Socket.
[ 4.184184] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.184225] systemd[1]: Starting LVM2 metadata daemon socket.
[ 4.184330] systemd[1]: Listening on udev Kernel Socket.
[ 4.184367] systemd[1]: Starting udev Kernel Socket.
[ 4.184488] systemd[1]: Listening on udev Control Socket.
[ 4.184525] systemd[1]: Starting udev Control Socket.
[ 4.184619] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.184655] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.185048] systemd[1]: Created slice System Slice.
[ 4.185115] systemd[1]: Starting System Slice.
[ 4.185535] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.185577] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 4.187804] systemd[1]: Starting Increase datagram queue length...
[ 4.188538] systemd[1]: Created slice system-getty.slice.
[ 4.188617] systemd[1]: Starting system-getty.slice.
[ 4.189072] systemd[1]: Created slice User and Session Slice.
[ 4.189131] systemd[1]: Starting User and Session Slice.
[ 4.189229] systemd[1]: Reached target Slices.
[ 4.189281] systemd[1]: Starting Slices.
[ 4.189575] systemd[1]: Listening on Journal Socket.
[ 4.189669] systemd[1]: Starting Journal Socket.
[ 4.192234] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 4.195576] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.199596] systemd[1]: Started Read required files in advance.
[ 4.201899] systemd[1]: Starting Read required files in advance...
[ 4.204350] systemd[1]: Starting Uncomplicated firewall...
[ 4.207222] systemd[1]: Starting Nameserver information manager...
[ 4.211411] systemd[1]: Mounting Debug File System...
[ 4.214393] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.501524] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.503837] systemd[1]: Starting udev Coldplug all Devices...
[ 4.506884] systemd[1]: Mounting Huge Pages File System...
[ 4.782605] systemd[1]: Starting Load Kernel Modules...
[ 4.782894] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.782980] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.783207] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.783281] systemd[1]: Starting Journal Socket (/dev/log).
[ 4.786276] systemd[1]: Starting Setup Virtual Console...
[ 4.790932] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 4.791829] systemd[1]: Started Uncomplicated firewall.
[ 4.794903] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 4.941262] systemd[1]: Started Setup Virtual Console.
[ 5.009261] systemd[1]: Mounted Huge Pages File System.
[ 5.009444] systemd[1]: Mounted Debug File System.
[ 5.009564] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.014282] systemd[1]: Started Increase datagram queue length.
[ 5.122244] systemd[1]: Started udev Coldplug all Devices.
[ 5.133969] systemd[1]: Starting udev Wait for Complete Device Initialization...
[ 5.134231] systemd[1]: Listening on Syslog Socket.
[ 5.134423] systemd[1]: Starting Syslog Socket.
[ 5.141075] systemd[1]: Starting Journal Service...
[ 5.186765] systemd[1]: Started Nameserver information manager.
[ 5.858679] lp: driver loaded but no devices found
[ 5.957204] ppdev: user-space parallel port driver
[ 6.032773] systemd[1]: Started Journal Service.
[ 8.829079] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.846665] acpi device:03: registered as cooling_device2
[ 8.847003] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 9.053008] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.057981] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/SNY5001:00/input/input7
[ 9.062077] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/SNY5001:00/input/input8
[ 9.100485] intel_rng: FWH not detected
[ 9.187467] sony_laptop: brightness ignored, must be controlled by ACPI video driver
[ 9.187492] sony_laptop: SNC setup done.
[ 9.285410] [drm] Initialized drm 1.1.0 20060810
[ 9.359484] ACPI Warning: SystemIO range 0x00001028-0x0000102f conflicts with OpRegion 0x00001000-0x0000107f (\PMIO) (20141107/utaddress-258)
[ 9.359506] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.359515] ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20141107/utaddress-258)
[ 9.359529] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.359535] ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20141107/utaddress-258)
[ 9.359548] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.359553] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.476682] leds_ss4200: no LED devices found
[ 9.492298] r592: driver successfully loaded
[ 10.181553] Bluetooth: Core ver 2.20
[ 10.181625] NET: Registered protocol family 31
[ 10.181632] Bluetooth: HCI device and connection manager initialized
[ 10.181647] Bluetooth: HCI socket layer initialized
[ 10.181659] Bluetooth: L2CAP socket layer initialized
[ 10.181685] Bluetooth: SCO socket layer initialized
[ 10.227495] cfg80211: Calling CRDA to update world regulatory domain
[ 10.248094] [drm] Memory usable by graphics device = 256M
[ 10.248108] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 10.248115] fb: switching to inteldrmfb from VESA VGA
[ 10.248191] Console: switching to colour dummy device 80x25
[ 10.248418] [drm] Replacing VGA console driver
[ 10.250644] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.250652] [drm] Driver supports precise vblank timestamp query.
[ 10.250898] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.258787] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
[ 10.402448] media: Linux media interface: v0.10
[ 10.403628] usbcore: registered new interface driver btusb
[ 10.505417] Linux video capture interface: v2.00
[ 10.552225] [drm] initialized overlay support
[ 10.553643] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[ 10.605414] fbcon: inteldrmfb (fb0) is primary device
[ 10.605627] Console: switching to colour frame buffer device 170x48
[ 10.605730] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.605738] i915 0000:00:02.0: registered panic notifier
[ 11.192636] uvcvideo: Found UVC 1.00 device <unnamed> (04f2:b172)
[ 11.211511] input: UVC Camera (04f2:b172) as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9
[ 11.212320] usbcore: registered new interface driver uvcvideo
[ 11.212329] USB Video Class driver (1.1.1)
[ 11.213318] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.213332] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.213343] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 11.213352] sound hdaudioC0D0: mono: mono_out=0x0
[ 11.213360] sound hdaudioC0D0: inputs:
[ 11.213371] sound hdaudioC0D0: Mic=0x18
[ 11.213381] sound hdaudioC0D0: Internal Mic=0x12
[ 11.224578] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.226512] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.288786] ath: phy0: Enable LNA combining
[ 11.291355] ath: phy0: ASPM enabled: 0x42
[ 11.291363] ath: EEPROM regdomain: 0x65
[ 11.291367] ath: EEPROM indicates we should expect a direct regpair map
[ 11.291373] ath: Country alpha2 being used: 00
[ 11.291377] ath: Regpair used: 0x65
[ 11.473490] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.475071] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8500000, irq=17
[ 12.478505] cfg80211: World regulatory domain updated:
[ 12.478515] cfg80211: DFS Master region: unset
[ 12.478519] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 12.478527] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 12.478534] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 12.478540] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 12.478546] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 12.478551] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 13.387822] Adding 1036284k swap on /dev/mapper/lubuntu--vg-swap_1. Priority:-1 extents:1 across:1036284k FS
[ 15.734901] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 16.101123] systemd-journald[217]: Received request to flush runtime journal from PID 1
[ 16.924616] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 16.927484] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 21.455768] audit: type=1400 audit(1442760423.480:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=450 comm="apparmor_parser"
[ 21.455805] audit: type=1400 audit(1442760423.480:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=450 comm="apparmor_parser"
[ 21.463979] audit: type=1400 audit(1442760423.488:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=450 comm="apparmor_parser"
[ 21.464080] audit: type=1400 audit(1442760423.492:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=450 comm="apparmor_parser"
[ 21.464111] audit: type=1400 audit(1442760423.492:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=450 comm="apparmor_parser"
[ 21.464140] audit: type=1400 audit(1442760423.492:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=450 comm="apparmor_parser"
[ 21.506894] audit: type=1400 audit(1442760423.532:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=450 comm="apparmor_parser"
[ 21.506933] audit: type=1400 audit(1442760423.532:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=450 comm="apparmor_parser"
[ 21.506961] audit: type=1400 audit(1442760423.532:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=450 comm="apparmor_parser"
[ 21.506987] audit: type=1400 audit(1442760423.532:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=450 comm="apparmor_parser"
[ 22.798252] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.798263] Bluetooth: BNEP filters: protocol multicast
[ 22.798281] Bluetooth: BNEP socket layer initialized
[ 22.849880] Bluetooth: RFCOMM TTY layer initialized
[ 22.849907] Bluetooth: RFCOMM socket layer initialized
[ 22.849934] Bluetooth: RFCOMM ver 1.11
[ 23.024174] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 23.203145] usb 2-2: New USB device found, idVendor=046d, idProduct=c05a
[ 23.203161] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 23.203173] usb 2-2: Product: USB Optical Mouse
[ 23.203183] usb 2-2: Manufacturer: Logitech
[ 23.388451] hidraw: raw HID events driver (C) Jiri Kosina
[ 23.535266] usbcore: registered new interface driver usbhid
[ 23.535276] usbhid: USB HID core driver
[ 23.571164] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:046D:C05A.0001/input/input12
[ 23.571857] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 25.873527] wlan0: authenticate with dc:0b:1a:20:5f:db
[ 25.887615] wlan0: send auth to dc:0b:1a:20:5f:db (try 1/3)
[ 25.889671] wlan0: authenticated
[ 25.892102] wlan0: associate with dc:0b:1a:20:5f:db (try 1/3)
[ 25.913906] wlan0: RX AssocResp from dc:0b:1a:20:5f:db (capab=0x431 status=0 aid=1)
[ 25.914128] wlan0: associated
[ 30.072725] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.184642] wlan0: deauthenticating from dc:0b:1a:20:5f:db by local choice (Reason: 3=DEAUTH_LEAVING)
[ 30.193223] cfg80211: Calling CRDA to update world regulatory domain
[ 30.215960] cfg80211: World regulatory domain updated:
[ 30.215972] cfg80211: DFS Master region: unset
[ 30.215978] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 30.215988] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 30.215996] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 30.216062] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 30.216071] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 30.216079] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 30.237603] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.470189] PM: Syncing filesystems ... done.
[ 30.784953] PM: Preparing system for mem sleep
[ 30.785242] Freezing user space processes ... (elapsed 0.128 seconds) done.
[ 30.913619] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 30.914992] PM: Entering mem sleep
[ 30.915030] Suspending console(s) (use no_console_suspend to debug)
[ 30.915825] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 30.917007] sd 0:0:0:0: [sda] Stopping disk
[ 31.508156] PM: suspend of devices complete after 592.841 msecs
[ 31.524210] PM: late suspend of devices complete after 16.033 msecs
[ 31.525273] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 31.525419] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 31.525519] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 31.540335] PM: noirq suspend of devices complete after 16.113 msecs
[ 31.540386] ACPI: Preparing to enter system sleep state S3
[ 31.540513] PM: Saving platform NVS memory
[ 31.540527] Disabling non-boot CPUs ...
[ 31.542034] smpboot: CPU 1 is now offline
[ 31.542320] ACPI: Low-level resume complete
[ 31.542320] PM: Restoring platform NVS memory
[ 31.542320] Enabling non-boot CPUs ...
[ 31.542320] x86: Booting SMP configuration:
[ 31.542320] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 31.541976] Initializing CPU#1
[ 31.554625] CPU1 is up
[ 31.554992] ACPI: Waking up from system sleep state S3
[ 31.555625] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 31.555670] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 31.568348] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 31.568719] PM: noirq resume of devices complete after 13.456 msecs
[ 31.569227] PM: early resume of devices complete after 0.446 msecs
[ 31.572387] usb usb2: root hub lost power or was reset
[ 31.572450] usb usb3: root hub lost power or was reset
[ 31.572508] usb usb4: root hub lost power or was reset
[ 31.572565] usb usb5: root hub lost power or was reset
[ 31.573786] ath: phy0: ASPM enabled: 0x42
[ 31.573804] sdhci-pci 0000:0a:09.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 31.580236] sd 0:0:0:0: [sda] Starting disk
[ 31.675751] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 31.916179] usb 3-2: reset full-speed USB device number 2 using uhci_hcd
[ 32.056185] usb 2-2: reset low-speed USB device number 2 using uhci_hcd
[ 32.072493] psmouse serio1: synaptics: queried max coordinates: x [..5724], y [..4996]
[ 32.373910] PM: resume of devices complete after 804.664 msecs
[ 32.375118] PM: Finishing wakeup.
[ 32.375124] Restarting tasks ... done.
[ 32.733532] video LNXVIDEO:00: Restoring backlight state
[ 33.208570] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 33.208593] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 33.208610] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 33.208626] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 33.216657] ata1.00: configured for UDMA/100
[ 33.838882] wlan0: authenticate with dc:0b:1a:20:5f:db
[ 33.852600] wlan0: send auth to dc:0b:1a:20:5f:db (try 1/3)
[ 33.956210] wlan0: send auth to dc:0b:1a:20:5f:db (try 2/3)
[ 33.958052] wlan0: authenticated
[ 33.960164] wlan0: associate with dc:0b:1a:20:5f:db (try 1/3)
[ 33.984427] wlan0: RX AssocResp from dc:0b:1a:20:5f:db (capab=0x431 status=0 aid=1)
[ 33.984607] wlan0: associated
[ 117.383535] perf interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 234.190053] perf interrupt took too long (5007 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 3942.202089] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3944.238127] wlan0: deauthenticating from dc:0b:1a:20:5f:db by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3944.247166] cfg80211: Calling CRDA to update world regulatory domain
[ 3947.074567] cfg80211: World regulatory domain updated:
[ 3947.074578] cfg80211: DFS Master region: unset
[ 3947.074584] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3947.074594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3947.074602] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3947.074610] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3947.074619] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3947.074627] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3948.096607] PM: Syncing filesystems ... done.
[ 3949.024617] PM: Preparing system for mem sleep
[ 3949.024883] Freezing user space processes ... (elapsed 0.288 seconds) done.
[ 3949.313435] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3949.314917] PM: Entering mem sleep
[ 3949.314956] Suspending console(s) (use no_console_suspend to debug)
[ 3949.326374] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3949.391267] sd 0:0:0:0: [sda] Stopping disk
[ 3949.972190] PM: suspend of devices complete after 656.946 msecs
[ 3949.988083] PM: late suspend of devices complete after 15.877 msecs
[ 3949.989126] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 3949.989240] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 3949.989342] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 3950.004335] PM: noirq suspend of devices complete after 16.239 msecs
[ 3950.004386] ACPI: Preparing to enter system sleep state S3
[ 3950.004515] PM: Saving platform NVS memory
[ 3950.004529] Disabling non-boot CPUs ...
[ 3950.006134] smpboot: CPU 1 is now offline
[ 3950.006357] ACPI: Low-level resume complete
[ 3950.006357] PM: Restoring platform NVS memory
[ 3950.006357] Enabling non-boot CPUs ...
[ 3950.006357] x86: Booting SMP configuration:
[ 3950.006357] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 3950.006078] Initializing CPU#1
[ 3950.018853] CPU1 is up
[ 3950.019222] ACPI: Waking up from system sleep state S3
[ 3950.019971] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 3950.020078] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 3950.036149] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 3950.036620] PM: noirq resume of devices complete after 17.130 msecs
[ 3950.037125] PM: early resume of devices complete after 0.444 msecs
[ 3950.040408] usb usb2: root hub lost power or was reset
[ 3950.040472] usb usb3: root hub lost power or was reset
[ 3950.040530] usb usb4: root hub lost power or was reset
[ 3950.040588] usb usb5: root hub lost power or was reset
[ 3950.041814] ath: phy0: ASPM enabled: 0x42
[ 3950.041832] sdhci-pci 0000:0a:09.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 3950.048640] sd 0:0:0:0: [sda] Starting disk
[ 3950.140396] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 3950.376243] usb 3-2: reset full-speed USB device number 2 using uhci_hcd
[ 3950.524216] usb 2-2: reset low-speed USB device number 2 using uhci_hcd
[ 3950.554931] psmouse serio1: synaptics: queried max coordinates: x [..5724], y [..4996]
[ 3950.841327] PM: resume of devices complete after 804.181 msecs
[ 3950.842706] PM: Finishing wakeup.
[ 3950.842712] Restarting tasks ... done.
[ 3951.003771] video LNXVIDEO:00: Restoring backlight state
[ 3951.660352] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3951.660364] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 3951.660372] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 3951.660380] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3951.668486] ata1.00: configured for UDMA/100
[ 3952.975116] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3953.124137] systemd[1]: Unit suspend.target is bound to inactive unit systemd-suspend.service. Stopping, too.
[ 3962.312597] wlan0: authenticate with dc:0b:1a:20:5f:db
[ 3962.330286] wlan0: send auth to dc:0b:1a:20:5f:db (try 1/3)
[ 3962.332157] wlan0: authenticated
[ 3962.376967] wlan0: associate with dc:0b:1a:20:5f:db (try 1/3)
[ 3962.399162] wlan0: RX AssocResp from dc:0b:1a:20:5f:db (capab=0x431 status=0 aid=1)
[ 3962.399355] wlan0: associated
[ 3978.006515] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3978.119201] wlan0: deauthenticating from dc:0b:1a:20:5f:db by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3978.128592] cfg80211: Calling CRDA to update world regulatory domain
[ 3978.206599] cfg80211: World regulatory domain updated:
[ 3978.206612] cfg80211: DFS Master region: unset
[ 3978.206618] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3978.206628] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3978.206636] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3978.206645] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3978.206654] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3978.206663] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3978.234570] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3978.408259] PM: Syncing filesystems ... done.
[ 3978.962597] PM: Preparing system for mem sleep
[ 3978.962849] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 3978.965448] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3978.966849] PM: Entering mem sleep
[ 3978.966878] Suspending console(s) (use no_console_suspend to debug)
[ 3978.967579] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3979.077792] sd 0:0:0:0: [sda] Stopping disk
[ 3979.656202] PM: suspend of devices complete after 689.063 msecs
[ 3979.672222] PM: late suspend of devices complete after 15.999 msecs
[ 3979.673369] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 3979.673580] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 3979.673634] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 3979.688317] PM: noirq suspend of devices complete after 16.081 msecs
[ 3979.688369] ACPI: Preparing to enter system sleep state S3
[ 3979.688497] PM: Saving platform NVS memory
[ 3979.688511] Disabling non-boot CPUs ...
[ 3979.690101] smpboot: CPU 1 is now offline
[ 3979.690344] ACPI: Low-level resume complete
[ 3979.690344] PM: Restoring platform NVS memory
[ 3979.690344] Enabling non-boot CPUs ...
[ 3979.690344] x86: Booting SMP configuration:
[ 3979.690344] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 3979.690043] Initializing CPU#1
[ 3979.702817] CPU1 is up
[ 3979.703196] ACPI: Waking up from system sleep state S3
[ 3979.703998] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 3979.704160] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 3979.720166] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 3979.720629] PM: noirq resume of devices complete after 17.161 msecs
[ 3979.721127] PM: early resume of devices complete after 0.437 msecs
[ 3979.724404] usb usb2: root hub lost power or was reset
[ 3979.724469] usb usb3: root hub lost power or was reset
[ 3979.724527] usb usb4: root hub lost power or was reset
[ 3979.724585] usb usb5: root hub lost power or was reset
[ 3979.725813] ath: phy0: ASPM enabled: 0x42
[ 3979.725829] sdhci-pci 0000:0a:09.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 3979.732463] sd 0:0:0:0: [sda] Starting disk
[ 3979.825734] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 3980.060218] usb 3-2: reset full-speed USB device number 2 using uhci_hcd
[ 3980.208164] usb 2-2: reset low-speed USB device number 2 using uhci_hcd
[ 3980.247364] psmouse serio1: synaptics: queried max coordinates: x [..5724], y [..4996]
[ 3980.526177] PM: resume of devices complete after 805.031 msecs
[ 3980.527396] PM: Finishing wakeup.
[ 3980.527401] Restarting tasks ... done.
[ 3980.726973] video LNXVIDEO:00: Restoring backlight state
[ 3980.764138] systemd[1]: Unit sleep.target is not needed anymore. Stopping.
[ 3980.828153] systemd[1]: Unit suspend.target is bound to inactive unit systemd-suspend.service. Stopping, too.
[ 3981.344371] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3981.344386] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 3981.344396] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 3981.344406] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3981.352540] ata1.00: configured for UDMA/100
[ 3982.803916] wlan0: authenticate with dc:0b:1a:20:5f:db
[ 3982.824951] wlan0: send auth to dc:0b:1a:20:5f:db (try 1/3)
[ 3982.827386] wlan0: authenticated
[ 3982.828459] wlan0: associate with dc:0b:1a:20:5f:db (try 1/3)
[ 3982.849874] wlan0: RX AssocResp from dc:0b:1a:20:5f:db (capab=0x431 status=0 aid=1)
[ 3982.850070] wlan0: associated


[Logan]

Είσαι σίγουρος ότι κάνεις κανονικό τερματισμό; κλείσε τον υπολογιστή σου από τερματικό έτσι:

Κώδικας: Επιλογή όλων

sudo shutdown -P now

[anonymouscy]

Το έκανε πάλι.

Έκανε κάτι εναλλαγές άσπρης μαύρης οθόνης, εμφάνιζε λίγο το εικονίδιο της lubuntu να φορτώνει, ξανά μαύρο για λίγο και ξαφνικά αναστολή. Μόλις πατάω ξανά το κουμπί ανοίγει απευθείας στην οθόνη μου.

[anonymouscy]

Μπορεί να παίζει ρόλο το γεγονός ότι χρησιμοποιώ μόνο ένα δίσκο; (επειδή κάπου διάβασα ότι είναι καλύτερα να χρησιμοποιείς 2ο)

Άλλαξα μια εντολή στο startup πατώνας δεξί shift, από "quick splash" σε "nomodeset". Άνοιξε κανονικά όμως η ανάλυση εικόνας ήταν χάλια συν το ότι αντιμετώπισε προβλήματα λειτουργικά. Άρα φταίει η κάρτα γραφικών ή κάποιος driver;

[Logan]

Μπορεί να παίζει ρόλο το γεγονός ότι χρησιμοποιώ μόνο ένα δίσκο; (επειδή κάπου διάβασα ότι είναι καλύτερα να χρησιμοποιείς 2ο)

Δεν νομίζω ότι ισχύει κάτι τέτοιο.

Άλλαξα μια εντολή στο startup πατώνας δεξί shift, από "quick splash" σε "nomodeset". Άνοιξε κανονικά όμως η ανάλυση εικόνας ήταν χάλια συν το ότι αντιμετώπισε προβλήματα λειτουργικά.

Δώσε και άλλες πληροφορίες σχετικά με το πρόβλημά σου, στις ρυθμίσεις δεν έχει επιλογή για την ανάλυση; Επίσης δώσε και την έξοδο της εντολής xrand.

[anonymouscy]

Δε βρέθηκε εντολή 'xrand', μήπως εννοούσατε:
Εντολή 'xrandr' από το πακέτο 'x11-xserver-utils' (main)
Εντολή 'rand' από το πακέτο 'rand' (universe)
xrand: η εντολή δε βρέθηκε