system program problem detected

...εγκαταστάσεις, αναβαθμίσεις, διαχείριση partitions, boot-loader, κλπ

Συντονιστής: adem1

Κανόνες Δ. Συζήτησης
Στην ενότητα αυτή γράφουμε θέματα/ προβλήματα μόνο για το UBUNTU ή τα παράγωγά του.

system program problem detected

Δημοσίευσηαπό bobptz » 05 Ιούλ 2019, 19:32

Κάθε φορά που μπουτάρω (18.04) χωρίς να κάνω απολύτως τίποτα, μετά από 10-30 sec μου εμφανίζει το μήνυμα "system program problem detected".

Κάνω κλικ στο "Report Problem" και δεν κάνει απολύτως τίποτα. Μετά συνεχίζω τη δουλειά μου σα να μη συνέβη τίποτα.

Τι μπορώ να δω?
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 556
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό the_eye » 05 Ιούλ 2019, 23:24

Το dmesg
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 18.04 bionic 4.15.0-42-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel Sky Lake Integrated Graphics [8086:1912] {i915_bpo}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11455
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό bobptz » 05 Ιούλ 2019, 23:28

Κώδικας: Επιλογή όλων
$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26
[    0.000000] Linux version 4.18.0-25-generic (buildd@lgw01-amd64-033) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #26~18.04.1-Ubuntu SMP Thu Jun 27 07:28:31 UTC 2019 (Ubuntu 4.18.0-25.26~18.04.1-generic 4.18.20)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-25-generic root=UUID=ae4d4dfe-88d0-4a60-9c2e-645611ba0169 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b96abfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b96ac000-0x00000000b96b2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b96b3000-0x00000000ba320fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba321000-0x00000000ba7f7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ba7f8000-0x00000000cd43cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd43d000-0x00000000cd4a3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cd4a4000-0x00000000cd4ebfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd4ec000-0x00000000cd620fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cd621000-0x00000000cdffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Pro3, BIOS P2.30 03/08/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7FE0000000 write-back
[    0.000000]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   3 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   4 base 00CF000000 mask 7FFF000000 uncachable
[    0.000000]   5 base 021FE00000 mask 7FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] total RAM covered: 7918M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K    chunk_size: 32M    num_reg: 7     lose cover RAM: 0G
[    0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xce000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd160-0x000fd16f] mapped at [(____ptrval____)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x08963000, 0x08963fff] PGTABLE
[    0.000000] BRK [0x08964000, 0x08964fff] PGTABLE
[    0.000000] BRK [0x08965000, 0x08965fff] PGTABLE
[    0.000000] BRK [0x08966000, 0x08966fff] PGTABLE
[    0.000000] BRK [0x08967000, 0x08967fff] PGTABLE
[    0.000000] BRK [0x08968000, 0x08968fff] PGTABLE
[    0.000000] BRK [0x08969000, 0x08969fff] PGTABLE
[    0.000000] BRK [0x0896a000, 0x0896afff] PGTABLE
[    0.000000] BRK [0x0896b000, 0x0896bfff] PGTABLE
[    0.000000] BRK [0x0896c000, 0x0896cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x30c01000-0x345f7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000CD5F0088 00008C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000CD6006D8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000CD5F01A8 01052F (v02 ALASKA A M I    00000230 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000CD620F80 000040
[    0.000000] ACPI: APIC 0x00000000CD6007E8 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000CD600860 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000CD6008A8 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000CD600DE8 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000CD601960 0001C7 (v01 PmRef  LakeTiny 00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 0x00000000CD601B28 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CD601B68 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CD601BA0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000CD601F10 005B5E (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: AAFT 0x00000000CD607A70 00031D (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: UEFI 0x00000000CD607D90 000042 (v01 ALASKA A M I    01072009      00000000)
[    0.000000] ACPI: DMAR 0x00000000CD607DD8 0000B8 (v01 INTEL  BDW      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21fdd3000-0x21fdfdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b96abfff]
[    0.000000]   node   0: [mem 0x00000000b96b3000-0x00000000ba320fff]
[    0.000000]   node   0: [mem 0x00000000ba7f8000-0x00000000cd43cfff]
[    0.000000]   node   0: [mem 0x00000000cd4a4000-0x00000000cd4ebfff]
[    0.000000]   node   0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021fdfffff]
[    0.000000] Reserved but unavailable: 12476 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[    0.000000] On node 0 totalpages: 2018628
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13055 pages used for memmap
[    0.000000]   DMA32 zone: 835496 pages, LIFO batch:31
[    0.000000]   Normal zone: 18424 pages used for memmap
[    0.000000]   Normal zone: 1179136 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0xcf200000-0xdf1fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb96ac000-0xb96b2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xba321000-0xba7f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd43d000-0xcd4a3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd4ec000-0xcd620fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd621000-0xcdffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1987064
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-25-generic root=UUID=ae4d4dfe-88d0-4a60-9c2e-645611ba0169 ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7793080K/8074512K available (12300K kernel code, 2633K rwdata, 4380K rodata, 2464K init, 2340K bss, 281432K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 40828 entries in 160 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000]    Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 39
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.000000] DMAR: RMRR base: 0x000000cdea5000 end: 0x000000cdeb3fff
[    0.000000] DMAR: RMRR base: 0x000000cf000000 end: 0x000000df1fffff
[    0.000000] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.024000] tsc: PIT calibration matches HPET. 1 loops
[    0.024000] tsc: Detected 3192.632 MHz processor
[    0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e0519b3f62, max_idle_ns: 440795337980 ns
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.26 BogoMIPS (lpj=12770528)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028085] mce: CPU supports 9 MCE banks
[    0.028092] CPU0: Thermal monitoring enabled (TM1)
[    0.028102] process: using mwait in idle threads
[    0.028104] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.028105] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.028106] Spectre V2 : Mitigation: Full generic retpoline
[    0.028106] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.028107] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.028111] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.028112] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.028133] MDS: Mitigation: Clear CPU buffers
[    0.028203] Freeing SMP alternatives memory: 36K
[    0.029124] TSC deadline timer enabled
[    0.029126] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.029188] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.029221] ... version:                3
[    0.029221] ... bit width:              48
[    0.029222] ... generic registers:      8
[    0.029222] ... value mask:             0000ffffffffffff
[    0.029223] ... max period:             00007fffffffffff
[    0.029223] ... fixed-purpose events:   3
[    0.029224] ... event mask:             00000007000000ff
[    0.029247] Hierarchical SRCU implementation.
[    0.029972] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.029982] smp: Bringing up secondary CPUs ...
[    0.030033] x86: Booting SMP configuration:
[    0.030034] .... node  #0, CPUs:      #1 #2 #3
[    0.033474] smp: Brought up 1 node, 4 CPUs
[    0.033474] smpboot: Max logical packages: 1
[    0.033474] smpboot: Total of 4 processors activated (25541.05 BogoMIPS)
[    0.036156] devtmpfs: initialized
[    0.036156] x86/mm: Memory block size: 128MB
[    0.036495] PM: Registering ACPI NVS region [mem 0xb96ac000-0xb96b2fff] (28672 bytes)
[    0.036495] PM: Registering ACPI NVS region [mem 0xcd4ec000-0xcd620fff] (1265664 bytes)
[    0.036495] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.036495] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.036495] pinctrl core: initialized pinctrl subsystem
[    0.036495] RTC time: 20:22:58, date: 07/05/19
[    0.036495] NET: Registered protocol family 16
[    0.036495] audit: initializing netlink subsys (disabled)
[    0.036495] audit: type=2000 audit(1562358178.036:1): state=initialized audit_enabled=0 res=1
[    0.036495] cpuidle: using governor ladder
[    0.036495] cpuidle: using governor menu
[    0.036495] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.036495] ACPI: bus type PCI registered
[    0.036495] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.036495] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.036495] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.036495] PCI: Using configuration type 1 for base access
[    0.036495] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.036901] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.036901] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.036901] ACPI: Added _OSI(Module Device)
[    0.036901] ACPI: Added _OSI(Processor Device)
[    0.036901] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.036901] ACPI: Added _OSI(Processor Aggregator Device)
[    0.036901] ACPI: Added _OSI(Linux-Dell-Video)
[    0.036901] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.053238] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.057888] ACPI: Dynamic OEM Table Load:
[    0.057893] ACPI: SSDT 0xFFFFA03296122C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.058419] ACPI: Dynamic OEM Table Load:
[    0.058422] ACPI: SSDT 0xFFFFA03296398000 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.058990] ACPI: Dynamic OEM Table Load:
[    0.058993] ACPI: SSDT 0xFFFFA03295C07200 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.060984] ACPI: Interpreter enabled
[    0.061010] ACPI: (supports S0 S3 S4 S5)
[    0.061011] ACPI: Using IOAPIC for interrupt routing
[    0.061079] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.061783] ACPI: Enabled 12 GPEs in block 00 to 3F
[    0.062435] ACPI: Power Resource [PG00] (on)
[    0.062849] ACPI: Power Resource [PG01] (on)
[    0.063258] ACPI: Power Resource [PG02] (on)
[    0.076263] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.076268] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.076613] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR]
[    0.076933] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.076934] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.077386] PCI host bridge to bus 0000:00
[    0.077388] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.077389] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.077390] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.077391] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.077392] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.077393] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.077393] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.077394] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.077395] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.077396] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.077398] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.077403] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.077491] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[    0.077499] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.077504] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.077507] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.077587] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.077594] pci 0000:00:03.0: reg 0x10: [mem 0xf7d34000-0xf7d37fff 64bit]
[    0.077696] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[    0.077713] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
[    0.077766] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.077841] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[    0.077859] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3e000-0xf7d3e00f 64bit]
[    0.077914] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.078010] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
[    0.078025] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[    0.078032] pci 0000:00:19.0: reg 0x14: [mem 0xf7d3c000-0xf7d3cfff]
[    0.078038] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[    0.078088] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.078164] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[    0.078182] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b3ff]
[    0.078255] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.078332] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[    0.078349] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
[    0.078409] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.078481] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[    0.078540] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.078666] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[    0.078726] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.078848] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[    0.078867] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d3a000-0xf7d3a3ff]
[    0.078940] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.079019] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[    0.079183] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[    0.079197] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.079202] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.079208] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.079214] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.079219] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.079225] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d39000-0xf7d397ff]
[    0.079255] pci 0000:00:1f.2: PME# supported from D3hot
[    0.079323] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[    0.079338] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d38000-0xf7d380ff 64bit]
[    0.079355] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.079486] acpiphp: Slot [1] registered
[    0.079490] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.079556] pci 0000:02:00.0: [1b21:1080] type 01 class 0x060401
[    0.079705] pci 0000:00:1c.6: PCI bridge to [bus 02-03] (subtractive decode)
[    0.079708] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.079710] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.079714] pci 0000:00:1c.6:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.079715] pci 0000:00:1c.6:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.079716] pci 0000:00:1c.6:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.079717] pci 0000:00:1c.6:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.079718] pci 0000:00:1c.6:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.079719] pci 0000:00:1c.6:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.079720] pci 0000:00:1c.6:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.079721] pci 0000:00:1c.6:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.079722] pci 0000:00:1c.6:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.079723] pci 0000:00:1c.6:   bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[    0.079749] pci_bus 0000:03: extended config space not accessible
[    0.079771] pci 0000:03:00.0: [1106:3038] type 00 class 0x0c0300
[    0.079847] pci 0000:03:00.0: reg 0x20: [io  0xe020-0xe03f]
[    0.079919] pci 0000:03:00.0: supports D1 D2
[    0.079920] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[    0.079965] pci 0000:03:00.1: [1106:3038] type 00 class 0x0c0300
[    0.080042] pci 0000:03:00.1: reg 0x20: [io  0xe000-0xe01f]
[    0.080113] pci 0000:03:00.1: supports D1 D2
[    0.080114] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot
[    0.080158] pci 0000:03:00.2: [1106:3104] type 00 class 0x0c0320
[    0.080183] pci 0000:03:00.2: reg 0x10: [mem 0xf7c00000-0xf7c000ff]
[    0.080310] pci 0000:03:00.2: supports D1 D2
[    0.080311] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot
[    0.080413] pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
[    0.080420] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[    0.080424] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.080432] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff] (subtractive decode)
[    0.080433] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff] (subtractive decode)
[    0.080434] pci 0000:02:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.080435] pci 0000:02:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.080436] pci 0000:02:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.080437] pci 0000:02:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.080437] pci 0000:02:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.080438] pci 0000:02:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.080439] pci 0000:02:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.080440] pci 0000:02:00.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.080441] pci 0000:02:00.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.080442] pci 0000:02:00.0:   bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[    0.081372] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.081429] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.081482] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.081535] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.081588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.081640] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.081694] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.081746] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.082041] SCSI subsystem initialized
[    0.082048] libata version 3.00 loaded.
[    0.082048] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.082048] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.082048] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.082048] vgaarb: loaded
[    0.082048] ACPI: bus type USB registered
[    0.082048] usbcore: registered new interface driver usbfs
[    0.082048] usbcore: registered new interface driver hub
[    0.082048] usbcore: registered new device driver usb
[    0.082048] pps_core: LinuxPPS API ver. 1 registered
[    0.082048] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.082048] PTP clock support registered
[    0.082048] EDAC MC: Ver: 3.0.0
[    0.082048] PCI: Using ACPI for IRQ routing
[    0.082048] PCI: pci_cache_line_size set to 64 bytes
[    0.082048] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.082048] e820: reserve RAM buffer [mem 0xb96ac000-0xbbffffff]
[    0.082048] e820: reserve RAM buffer [mem 0xba321000-0xbbffffff]
[    0.082048] e820: reserve RAM buffer [mem 0xcd43d000-0xcfffffff]
[    0.082048] e820: reserve RAM buffer [mem 0xcd4ec000-0xcfffffff]
[    0.082048] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[    0.082048] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[    0.082048] NetLabel: Initializing
[    0.082048] NetLabel:  domain hash size = 128
[    0.082048] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.082048] NetLabel:  unlabeled traffic allowed by default
[    0.082048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.082048] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.084005] clocksource: Switched to clocksource tsc-early
[    0.091868] VFS: Disk quotas dquot_6.6.0
[    0.091880] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.091954] AppArmor: AppArmor Filesystem Enabled
[    0.091972] pnp: PnP ACPI init
[    0.092103] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.092107] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.092200] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.092203] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092219] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.092252] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.092254] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.092337] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.092340] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092546] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.092549] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092700] pnp 00:06: [dma 0 disabled]
[    0.092736] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.093195] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.093198] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.093199] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.093200] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.093201] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.093202] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.093203] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.093205] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.093206] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.093207] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.093208] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.093211] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.093395] pnp: PnP ACPI: found 8 devices
[    0.098725] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.098752] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.098760] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.098763] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[    0.098769] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.098780] pci 0000:00:1c.6: PCI bridge to [bus 02-03]
[    0.098781] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.098784] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.098791] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.098792] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.098793] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.098794] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.098795] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.098796] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.098797] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.098798] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.098799] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.098800] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.098801] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.098802] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.098803] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.098804] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.098805] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.098806] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.098807] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.098808] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.098809] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.098810] pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.098811] pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.098812] pci_bus 0000:02: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.098813] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.098814] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.098815] pci_bus 0000:03: resource 4 [io  0xe000-0xefff]
[    0.098816] pci_bus 0000:03: resource 5 [mem 0xf7c00000-0xf7cfffff]
[    0.098817] pci_bus 0000:03: resource 6 [io  0x0000-0x0cf7 window]
[    0.098818] pci_bus 0000:03: resource 7 [io  0x0d00-0xffff window]
[    0.098819] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.098820] pci_bus 0000:03: resource 9 [mem 0x000d0000-0x000d3fff window]
[    0.098821] pci_bus 0000:03: resource 10 [mem 0x000d4000-0x000d7fff window]
[    0.098822] pci_bus 0000:03: resource 11 [mem 0x000d8000-0x000dbfff window]
[    0.098823] pci_bus 0000:03: resource 12 [mem 0x000dc000-0x000dffff window]
[    0.098824] pci_bus 0000:03: resource 13 [mem 0x000e0000-0x000e3fff window]
[    0.098825] pci_bus 0000:03: resource 14 [mem 0x000e4000-0x000e7fff window]
[    0.098826] pci_bus 0000:03: resource 15 [mem 0xdf200000-0xfeafffff window]
[    0.098952] NET: Registered protocol family 2
[    0.099071] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.099090] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.099162] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.099248] TCP: Hash tables configured (established 65536 bind 65536)
[    0.099270] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.099286] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.099319] NET: Registered protocol family 1
[    0.099322] NET: Registered protocol family 44
[    0.099328] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.124083] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c0 took 24010 usecs
[    0.148079] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c0 took 23424 usecs
[    0.148510] PCI: CLS 64 bytes, default 64
[    0.148532] Unpacking initramfs...
[    0.788100] Freeing initrd memory: 59356K
[    0.808027] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.808029] software IO TLB [mem 0xc943d000-0xcd43d000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    0.808165] Scanning for low memory corruption every 60 seconds
[    0.808610] Initialise system trusted keyrings
[    0.808615] Key type blacklist registered
[    0.808637] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.809515] zbud: loaded
[    0.809850] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.809978] fuse init (API version 7.27)
[    0.810022] pstore: using deflate compression
[    0.810758] Key type asymmetric registered
[    0.810759] Asymmetric key parser 'x509' registered
[    0.810779] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.810801] io scheduler noop registered
[    0.810802] io scheduler deadline registered
[    0.810818] io scheduler cfq registered (default)
[    0.811091] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[    0.811112] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.811149] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.811150] vesafb: scrolling: redraw
[    0.811151] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.811159] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 8128k, total 8128k
[    0.811215] Console: switching to colour frame buffer device 240x67
[    0.811233] fb0: VESA VGA frame buffer device
[    0.811243] intel_idle: MWAIT substates: 0x42120
[    0.811244] intel_idle: v0.4.1 model 0x3C
[    0.811350] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.811460] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.811467] ACPI: Power Button [PWRB]
[    0.811489] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.811493] ACPI: Sleep Button [SLPB]
[    0.811514] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.811523] ACPI: Power Button [PWRF]
[    0.811813] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.832255] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.833495] Linux agpgart interface v0.103
[    0.834498] loop: module loaded
[    0.834607] libphy: Fixed MDIO Bus: probed
[    0.834608] tun: Universal TUN/TAP device driver, 1.6
[    0.834625] PPP generic driver version 2.4.2
[    0.834646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.834648] ehci-pci: EHCI PCI platform driver
[    0.834736] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.834740] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.834749] ehci-pci 0000:00:1a.0: debug port 2
[    0.838646] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.838660] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3b000
[    0.852038] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.852074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.852075] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.852076] usb usb1: Product: EHCI Host Controller
[    0.852077] usb usb1: Manufacturer: Linux 4.18.0-25-generic ehci_hcd
[    0.852078] usb usb1: SerialNumber: 0000:00:1a.0
[    0.852223] hub 1-0:1.0: USB hub found
[    0.852228] hub 1-0:1.0: 2 ports detected
[    0.852407] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.852411] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.852419] ehci-pci 0000:00:1d.0: debug port 2
[    0.856317] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.856325] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d3a000
[    0.872037] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.872060] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.872061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.872062] usb usb2: Product: EHCI Host Controller
[    0.872063] usb usb2: Manufacturer: Linux 4.18.0-25-generic ehci_hcd
[    0.872064] usb usb2: SerialNumber: 0000:00:1d.0
[    0.872206] hub 2-0:1.0: USB hub found
[    0.872210] hub 2-0:1.0: 2 ports detected
[    0.872366] ehci-pci 0000:03:00.2: EHCI Host Controller
[    0.872370] ehci-pci 0000:03:00.2: new USB bus registered, assigned bus number 3
[    0.872410] ehci-pci 0000:03:00.2: irq 16, io mem 0xf7c00000
[    0.888038] ehci-pci 0000:03:00.2: USB 2.0 started, EHCI 1.00
[    0.888082] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.888084] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.888085] usb usb3: Product: EHCI Host Controller
[    0.888086] usb usb3: Manufacturer: Linux 4.18.0-25-generic ehci_hcd
[    0.888087] usb usb3: SerialNumber: 0000:03:00.2
[    0.888224] hub 3-0:1.0: USB hub found
[    0.888227] hub 3-0:1.0: 4 ports detected
[    0.888307] ehci-platform: EHCI generic platform driver
[    0.888312] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.888315] ohci-pci: OHCI PCI platform driver
[    0.888320] ohci-platform: OHCI generic platform driver
[    0.888324] uhci_hcd: USB Universal Host Controller Interface driver
[    0.888387] uhci_hcd 0000:03:00.0: UHCI Host Controller
[    0.888390] uhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.888398] uhci_hcd 0000:03:00.0: detected 2 ports
[    0.888428] uhci_hcd 0000:03:00.0: irq 18, io base 0x0000e020
[    0.888460] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    0.888462] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.888462] usb usb4: Product: UHCI Host Controller
[    0.888463] usb usb4: Manufacturer: Linux 4.18.0-25-generic uhci_hcd
[    0.888464] usb usb4: SerialNumber: 0000:03:00.0
[    0.888601] hub 4-0:1.0: USB hub found
[    0.888604] hub 4-0:1.0: 2 ports detected
[    0.888730] uhci_hcd 0000:03:00.1: UHCI Host Controller
[    0.888733] uhci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 5
[    0.888740] uhci_hcd 0000:03:00.1: detected 2 ports
[    0.888769] uhci_hcd 0000:03:00.1: irq 19, io base 0x0000e000
[    0.888801] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    0.888802] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.888803] usb usb5: Product: UHCI Host Controller
[    0.888804] usb usb5: Manufacturer: Linux 4.18.0-25-generic uhci_hcd
[    0.888805] usb usb5: SerialNumber: 0000:03:00.1
[    0.888939] hub 5-0:1.0: USB hub found
[    0.888943] hub 5-0:1.0: 2 ports detected
[    0.889093] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.889098] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 6
[    0.890139] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.890142] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.890254] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.890255] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.890256] usb usb6: Product: xHCI Host Controller
[    0.890257] usb usb6: Manufacturer: Linux 4.18.0-25-generic xhci-hcd
[    0.890258] usb usb6: SerialNumber: 0000:00:14.0
[    0.890398] hub 6-0:1.0: USB hub found
[    0.890413] hub 6-0:1.0: 14 ports detected
[    0.893280] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.893282] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 7
[    0.893284] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.893307] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    0.893308] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.893309] usb usb7: Product: xHCI Host Controller
[    0.893310] usb usb7: Manufacturer: Linux 4.18.0-25-generic xhci-hcd
[    0.893311] usb usb7: SerialNumber: 0000:00:14.0
[    0.893450] hub 7-0:1.0: USB hub found
[    0.893460] hub 7-0:1.0: 6 ports detected
[    0.894990] i8042: PNP: No PS/2 controller found.
[    0.895064] mousedev: PS/2 mouse device common for all mice
[    0.895208] rtc_cmos 00:02: RTC can wake from S4
[    0.895342] rtc_cmos 00:02: registered as rtc0
[    0.895353] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.895357] i2c /dev entries driver
[    0.895385] device-mapper: uevent: version 1.0.3
[    0.895436] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    0.895440] intel_pstate: Intel P-state driver initializing
[    0.895611] ledtrig-cpu: registered to indicate activity on CPUs
[    0.895883] NET: Registered protocol family 10
[    0.898473] Segment Routing with IPv6
[    0.898486] NET: Registered protocol family 17
[    0.898554] Key type dns_resolver registered
[    0.898756] RAS: Correctable Errors collector initialized.
[    0.898773] microcode: sig=0x306c3, pf=0x2, revision=0x27
[    0.898839] microcode: Microcode Update Driver: v2.2.
[    0.898854] sched_clock: Marking stable (898837307, 0)->(875677291, 23160016)
[    0.898974] registered taskstats version 1
[    0.898982] Loading compiled-in X.509 certificates
[    0.900708] Loaded X.509 cert 'Build time autogenerated kernel key: 1905f759da59a5526cc39fe3243b9dc0d8136b3b'
[    0.900720] zswap: loaded using pool lzo/zbud
[    0.903085] Key type big_key registered
[    0.903088] Key type trusted registered
[    0.904368] Key type encrypted registered
[    0.904370] AppArmor: AppArmor sha1 policy hashing enabled
[    0.904384] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.904387] ima: Allocated hash algorithm: sha1
[    0.904397] evm: Initialising EVM extended attributes:
[    0.904397] evm: security.selinux
[    0.904398] evm: security.SMACK64
[    0.904398] evm: security.SMACK64EXEC
[    0.904398] evm: security.SMACK64TRANSMUTE
[    0.904399] evm: security.SMACK64MMAP
[    0.904399] evm: security.apparmor
[    0.904399] evm: security.ima
[    0.904400] evm: security.capability
[    0.904400] evm: HMAC attrs: 0x1
[    0.904737]   Magic number: 11:326:396
[    0.904837] rtc_cmos 00:02: setting system clock to 2019-07-05 20:22:59 UTC (1562358179)
[    0.906501] Freeing unused kernel image memory: 2464K
[    0.936090] Write protecting the kernel read-only data: 20480k
[    0.936522] Freeing unused kernel image memory: 2008K
[    0.936747] Freeing unused kernel image memory: 1764K
[    0.942813] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.942813] x86/mm: Checking user space page tables
[    0.948582] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.015855] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.015855] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.015863] ahci 0000:00:1f.2: version 3.0
[    1.016186] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x29 impl SATA mode
[    1.016188] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    1.016336] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.040724] scsi host0: ahci
[    1.040888] scsi host1: ahci
[    1.041114] scsi host2: ahci
[    1.041220] scsi host3: ahci
[    1.041311] scsi host4: ahci
[    1.041370] scsi host5: ahci
[    1.041392] ata1: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39100 irq 28
[    1.041393] ata2: DUMMY
[    1.041394] ata3: DUMMY
[    1.041395] ata4: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39280 irq 28
[    1.041395] ata5: DUMMY
[    1.041397] ata6: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39380 irq 28
[    1.056131] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    1.056131] fb: switching to inteldrmfb from VESA VGA
[    1.056143] Console: switching to colour dummy device 80x25
[    1.056199] [drm] Replacing VGA console driver
[    1.064218] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.064218] [drm] Driver supports precise vblank timestamp query.
[    1.068043] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.070997] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    1.072155] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.072394] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.101083] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.111937] fbcon: inteldrmfb (fb0) is primary device
[    1.111980] Console: switching to colour frame buffer device 240x67
[    1.111997] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.169686] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:4b:7a:b7
[    1.169687] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.169713] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    1.170318] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.188038] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.204046] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.232036] usb 6-2: new full-speed USB device number 2 using xhci_hcd
[    1.348358] usb 1-1: New USB device found, idVendor=8087, idProduct=8009, bcdDevice= 0.00
[    1.348369] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.348639] hub 1-1:1.0: USB hub found
[    1.348711] hub 1-1:1.0: 6 ports detected
[    1.354778] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.354791] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.354876] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.355420] ata4.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[    1.355421] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.356154] ata4.00: configured for UDMA/133
[    1.356617] ata1.00: supports DRM functions and may not be fully accessible
[    1.357640] ata1.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
[    1.357641] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.358691] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.358704] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.358706] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.359012] ata6.00: ATAPI: ATAPI   iHAS124   E, 4L04, max UDMA/100
[    1.360024] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[    1.360352] usb 2-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.00
[    1.360353] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.360559] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.360571] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.360572] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.360616] ata1.00: supports DRM functions and may not be fully accessible
[    1.360645] hub 2-1:1.0: USB hub found
[    1.360694] hub 2-1:1.0: 8 ports detected
[    1.360858] ata6.00: configured for UDMA/100
[    1.363455] ata1.00: configured for UDMA/133
[    1.363639] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
[    1.363771] ata1.00: Enabling discard_zeroes_data
[    1.363771] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.363823] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.363831] sd 0:0:0:0: [sda] Write Protect is off
[    1.363832] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.363844] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.363881] scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[    1.363917] ata1.00: Enabling discard_zeroes_data
[    1.363998] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.364005] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.364006] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    1.364011] sd 3:0:0:0: [sdb] Write Protect is off
[    1.364012] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.364019] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.364186]  sda: sda1 sda2 sda3
[    1.364295] ata1.00: Enabling discard_zeroes_data
[    1.364686] scsi 5:0:0:0: CD-ROM            ATAPI    iHAS124   E      4L04 PQ: 0 ANSI: 5
[    1.365394] sd 0:0:0:0: [sda] supports TCG Opal
[    1.365395] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.377662]  sdb: sdb1
[    1.378097] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.433170] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.433181] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.433329] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.433462] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    1.445348] random: fast init done
[    1.451964] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.451965] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.452144] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.556134] usb 4-1: New USB device found, idVendor=045e, idProduct=07b9, bcdDevice= 1.14
[    1.556145] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.556146] usb 4-1: Product: USB Keyboard
[    1.556147] usb 4-1: Manufacturer: LITEON Technology
[    1.577949] hidraw: raw HID events driver (C) Jiri Kosina
[    1.593227] usbcore: registered new interface driver usbhid
[    1.593227] usbhid: USB HID core driver
[    1.594741] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-1/4-1:1.0/0003:045E:07B9.0001/input/input4
[    1.652264] hid-generic 0003:045E:07B9.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:03:00.0-1/input0
[    1.824034] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[    1.824037] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns
[    1.824072] clocksource: Switched to clocksource tsc
[    1.875317] usb 6-2: New USB device found, idVendor=1b3f, idProduct=2008, bcdDevice= 1.00
[    1.875318] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.875319] usb 6-2: Product: USB Audio Device
[    1.875320] usb 6-2: Manufacturer: GeneralPlus
[    1.876484] input: GeneralPlus USB Audio Device as /devices/pci0000:00/0000:00:14.0/usb6/6-2/6-2:1.3/0003:1B3F:2008.0002/input/input5
[    1.936227] hid-generic 0003:1B3F:2008.0002: input,hidraw1: USB HID v2.01 Device [GeneralPlus USB Audio Device] on usb-0000:00:14.0-2/input3
[    2.064035] usb 6-4: new high-speed USB device number 3 using xhci_hcd
[    2.412035] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[    2.594238] usb 4-2: New USB device found, idVendor=056a, idProduct=0302, bcdDevice= 1.00
[    2.594249] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.594250] usb 4-2: Product: Intuos PTS
[    2.594251] usb 4-2: Manufacturer: Wacom Co.,Ltd.
[    2.601654] hid-generic 0003:056A:0302.0003: hiddev0,hidraw2: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-2/input0
[    2.603465] hid-generic 0003:056A:0302.0004: hiddev1,hidraw3: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-2/input1
[    2.605365] input: Wacom Co.,Ltd. Intuos PTS as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-2/4-2:1.2/0003:056A:0302.0005/input/input6
[    2.605647] hid-generic 0003:056A:0302.0005: input,hidraw4: USB HID v1.10 Mouse [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-2/input2
[    2.609104] input: Wacom Intuos PT S Pen as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-2/4-2:1.0/0003:056A:0302.0003/input/input7
[    2.609291] wacom 0003:056A:0302.0003: hidraw2: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-2/input0
[    2.609399] input: Wacom Intuos PT S Finger as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-2/4-2:1.1/0003:056A:0302.0004/input/input11
[    2.609445] input: Wacom Intuos PT S Pad as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-2/4-2:1.1/0003:056A:0302.0004/input/input12
[    2.609487] wacom 0003:056A:0302.0004: hidraw3: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-2/input1
[    4.434724] usb 6-4: New USB device found, idVendor=046d, idProduct=082d, bcdDevice= 0.11
[    4.434726] usb 6-4: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[    4.434726] usb 6-4: Product: HD Pro Webcam C920
[    4.434727] usb 6-4: SerialNumber: CBD3F97F
[    4.560035] usb 6-13: new low-speed USB device number 4 using xhci_hcd
[    4.711503] usb 6-13: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[    4.711504] usb 6-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.711505] usb 6-13: Product: USB Optical Mouse
[    4.711506] usb 6-13: Manufacturer: Logitech
[    4.713620] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb6/6-13/6-13:1.0/0003:046D:C077.0006/input/input13
[    4.713903] hid-generic 0003:046D:C077.0006: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-13/input0
[    4.919880] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.032928] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.052172] systemd[1]: Detected architecture x86-64.
[    5.055353] systemd[1]: Set hostname to <bob-desktop>.
[    5.141528] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.141580] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.141690] systemd[1]: Created slice User and Session Slice.
[    5.141698] systemd[1]: Reached target Remote File Systems.
[    5.141774] systemd[1]: Created slice System Slice.
[    5.141822] systemd[1]: Listening on Syslog Socket.
[    5.141865] systemd[1]: Listening on udev Control Socket.
[    5.157730] lp: driver loaded but no devices found
[    5.161115] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    5.162487] ppdev: user-space parallel port driver
[    5.209816] systemd-journald[367]: Received request to flush runtime journal from PID 1
[    5.476964] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.493197] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    5.493199] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.493200] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.493201] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    5.493202] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    5.493202] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    5.493204] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    5.493205] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    5.493206] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    5.509973] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    5.510004] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    5.510029] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    5.510056] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[    5.510083] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[    5.510109] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[    5.510133] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[    5.510167] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[    5.515464] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    5.515465] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.515466] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.515466] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.515467] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.515734] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[    5.515794] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[    5.515825] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[    5.515859] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
[    5.515893] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input26
[    5.519398] cryptd: max_cpu_qlen set to 1000
[    5.522865] media: Linux media interface: v0.10
[    5.531629] videodev: Linux video capture interface: v2.00
[    5.537468] AVX2 version of gcm_enc/dec engaged.
[    5.537469] AES CTR mode by8 optimization enabled
[    5.544654] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
[    5.546563] uvcvideo 6-4:1.0: Entity type for entity Processing 3 was not initialized!
[    5.546564] uvcvideo 6-4:1.0: Entity type for entity Extension 6 was not initialized!
[    5.546566] uvcvideo 6-4:1.0: Entity type for entity Extension 12 was not initialized!
[    5.546566] uvcvideo 6-4:1.0: Entity type for entity Camera 1 was not initialized!
[    5.546567] uvcvideo 6-4:1.0: Entity type for entity Extension 8 was not initialized!
[    5.546568] uvcvideo 6-4:1.0: Entity type for entity Extension 9 was not initialized!
[    5.546569] uvcvideo 6-4:1.0: Entity type for entity Extension 10 was not initialized!
[    5.546570] uvcvideo 6-4:1.0: Entity type for entity Extension 11 was not initialized!
[    5.546938] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb6/6-4/6-4:1.0/input/input27
[    5.547053] usbcore: registered new interface driver uvcvideo
[    5.547053] USB Video Class driver (1.1.1)
[    5.635854] random: crng init done
[    5.635855] random: 7 urandom warning(s) missed due to ratelimiting
[    5.658547] intel_rapl: Found RAPL domain package
[    5.658548] intel_rapl: Found RAPL domain core
[    5.658549] intel_rapl: Found RAPL domain uncore
[    5.658550] intel_rapl: Found RAPL domain dram
[    5.693526] gpio_ich: GPIO from 436 to 511 on gpio_ich
[    5.724250] usbcore: registered new interface driver snd-usb-audio
[    5.742079] Adding 3383292k swap on /dev/sda3.  Priority:-2 extents:1 across:3383292k SSFS
[    5.764579] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    5.843699] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    5.884394] audit: type=1400 audit(1562358184.475:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=916 comm="apparmor_parser"
[    5.884462] audit: type=1400 audit(1562358184.475:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=915 comm="apparmor_parser"
[    5.884463] audit: type=1400 audit(1562358184.475:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=915 comm="apparmor_parser"
[    5.884465] audit: type=1400 audit(1562358184.475:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=915 comm="apparmor_parser"
[    5.885153] audit: type=1400 audit(1562358184.475:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=912 comm="apparmor_parser"
[    5.885155] audit: type=1400 audit(1562358184.475:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=912 comm="apparmor_parser"
[    5.885156] audit: type=1400 audit(1562358184.475:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=912 comm="apparmor_parser"
[    5.885157] audit: type=1400 audit(1562358184.475:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=912 comm="apparmor_parser"
[    5.885264] audit: type=1400 audit(1562358184.475:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=917 comm="apparmor_parser"
[    5.886649] audit: type=1400 audit(1562358184.475:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=920 comm="apparmor_parser"
[    6.176752] vboxdrv: loading out-of-tree module taints kernel.
[    6.176888] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    6.181415] vboxdrv: Found 4 processor cores
[    6.208152] vboxdrv: TSC mode is Invariant, tentative frequency 3192605922 Hz
[    6.208153] vboxdrv: Successfully loaded version 6.0.8 (interface 0x00290008)
[    6.279495] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    6.410449] VBoxNetFlt: Successfully started.
[    6.411550] VBoxNetAdp: Successfully started.
[    6.413011] VBoxPciLinuxInit
[    6.414719] vboxpci: IOMMU not found (not registered)
[    6.468141] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    9.086037] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[    9.086065] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[   18.211547] rfkill: input handler disabled
[   37.722295] usb 6-4: reset high-speed USB device number 3 using xhci_hcd
[   76.678881] ata1.00: exception Emask 0x10 SAct 0xfffffff9 SErr 0x400100 action 0x6 frozen
[   76.678885] ata1.00: irq_stat 0x08000000, interface fatal error
[   76.678889] ata1: SError: { UnrecovData Handshk }
[   76.678892] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.678898] ata1.00: cmd 61/08:00:d0:18:68/00:00:10:00:00/40 tag 0 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.678901] ata1.00: status: { DRDY }
[   76.678903] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.678909] ata1.00: cmd 61/08:18:98:0a:68/00:00:10:00:00/40 tag 3 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.678912] ata1.00: status: { DRDY }
[   76.678914] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.678920] ata1.00: cmd 61/08:20:c8:0a:68/00:00:10:00:00/40 tag 4 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.678923] ata1.00: status: { DRDY }
[   76.678925] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.678931] ata1.00: cmd 61/08:28:68:0b:68/00:00:10:00:00/40 tag 5 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.678933] ata1.00: status: { DRDY }
[   76.678935] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.678941] ata1.00: cmd 61/08:30:f0:0b:68/00:00:10:00:00/40 tag 6 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.678944] ata1.00: status: { DRDY }
[   76.678946] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.678951] ata1.00: cmd 61/08:38:48:0d:68/00:00:10:00:00/40 tag 7 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.678954] ata1.00: status: { DRDY }
[   76.678956] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.678962] ata1.00: cmd 61/08:40:d8:0d:68/00:00:10:00:00/40 tag 8 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.678964] ata1.00: status: { DRDY }
[   76.678966] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.678972] ata1.00: cmd 61/08:48:98:0e:68/00:00:10:00:00/40 tag 9 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.678975] ata1.00: status: { DRDY }
[   76.678977] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.678983] ata1.00: cmd 61/08:50:c0:0e:68/00:00:10:00:00/40 tag 10 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.678985] ata1.00: status: { DRDY }
[   76.678987] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.678993] ata1.00: cmd 61/10:58:10:0f:68/00:00:10:00:00/40 tag 11 ncq dma 8192 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.678996] ata1.00: status: { DRDY }
[   76.678998] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679004] ata1.00: cmd 61/08:60:80:10:68/00:00:10:00:00/40 tag 12 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679006] ata1.00: status: { DRDY }
[   76.679008] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679014] ata1.00: cmd 61/08:68:e0:10:68/00:00:10:00:00/40 tag 13 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679017] ata1.00: status: { DRDY }
[   76.679019] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679025] ata1.00: cmd 61/08:70:00:11:68/00:00:10:00:00/40 tag 14 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679027] ata1.00: status: { DRDY }
[   76.679029] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679035] ata1.00: cmd 61/08:78:20:11:68/00:00:10:00:00/40 tag 15 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679038] ata1.00: status: { DRDY }
[   76.679040] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679045] ata1.00: cmd 61/08:80:50:11:68/00:00:10:00:00/40 tag 16 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679048] ata1.00: status: { DRDY }
[   76.679050] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679056] ata1.00: cmd 61/08:88:98:12:68/00:00:10:00:00/40 tag 17 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679058] ata1.00: status: { DRDY }
[   76.679060] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679066] ata1.00: cmd 61/08:90:b8:12:68/00:00:10:00:00/40 tag 18 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679069] ata1.00: status: { DRDY }
[   76.679071] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679077] ata1.00: cmd 61/08:98:60:13:68/00:00:10:00:00/40 tag 19 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679079] ata1.00: status: { DRDY }
[   76.679082] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679087] ata1.00: cmd 61/08:a0:78:13:68/00:00:10:00:00/40 tag 20 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679090] ata1.00: status: { DRDY }
[   76.679092] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679098] ata1.00: cmd 61/08:a8:b0:13:68/00:00:10:00:00/40 tag 21 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679100] ata1.00: status: { DRDY }
[   76.679102] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679108] ata1.00: cmd 61/08:b0:10:14:68/00:00:10:00:00/40 tag 22 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679111] ata1.00: status: { DRDY }
[   76.679113] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679118] ata1.00: cmd 61/08:b8:78:14:68/00:00:10:00:00/40 tag 23 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679121] ata1.00: status: { DRDY }
[   76.679123] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679129] ata1.00: cmd 61/08:c0:00:15:68/00:00:10:00:00/40 tag 24 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679131] ata1.00: status: { DRDY }
[   76.679134] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679139] ata1.00: cmd 61/08:c8:10:15:68/00:00:10:00:00/40 tag 25 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679142] ata1.00: status: { DRDY }
[   76.679144] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679150] ata1.00: cmd 61/08:d0:68:16:68/00:00:10:00:00/40 tag 26 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679152] ata1.00: status: { DRDY }
[   76.679154] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679160] ata1.00: cmd 61/08:d8:30:17:68/00:00:10:00:00/40 tag 27 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679163] ata1.00: status: { DRDY }
[   76.679165] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679170] ata1.00: cmd 61/10:e0:50:17:68/00:00:10:00:00/40 tag 28 ncq dma 8192 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679173] ata1.00: status: { DRDY }
[   76.679175] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679181] ata1.00: cmd 61/08:e8:98:17:68/00:00:10:00:00/40 tag 29 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679184] ata1.00: status: { DRDY }
[   76.679186] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679191] ata1.00: cmd 61/08:f0:a8:17:68/00:00:10:00:00/40 tag 30 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679194] ata1.00: status: { DRDY }
[   76.679196] ata1.00: failed command: WRITE FPDMA QUEUED
[   76.679202] ata1.00: cmd 61/08:f8:78:18:68/00:00:10:00:00/40 tag 31 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   76.679204] ata1.00: status: { DRDY }
[   76.679208] ata1: hard resetting link
[   76.993650] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   76.994105] ata1.00: supports DRM functions and may not be fully accessible
[   76.997675] ata1.00: supports DRM functions and may not be fully accessible
[   77.000567] ata1.00: configured for UDMA/133
[   77.000598] ata1: EH complete
[   77.000748] ata1.00: Enabling discard_zeroes_data
[  205.968247] ata1.00: exception Emask 0x10 SAct 0x40000000 SErr 0x400100 action 0x6 frozen
[  205.968255] ata1.00: irq_stat 0x08000000, interface fatal error
[  205.968262] ata1: SError: { UnrecovData Handshk }
[  205.968270] ata1.00: failed command: WRITE FPDMA QUEUED
[  205.968284] ata1.00: cmd 61/30:f0:08:4e:ac/02:00:0f:00:00/40 tag 30 ncq dma 286720 out
                        res 40/00:f0:08:4e:ac/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  205.968290] ata1.00: status: { DRDY }
[  205.968297] ata1: hard resetting link
[  206.283309] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  206.283957] ata1.00: supports DRM functions and may not be fully accessible
[  206.287563] ata1.00: supports DRM functions and may not be fully accessible
[  206.290346] ata1.00: configured for UDMA/133
[  206.290351] ata1: EH complete
[  206.290380] ata1.00: Enabling discard_zeroes_data
[  235.403824] ata1.00: exception Emask 0x10 SAct 0xfff7ffff SErr 0x400100 action 0x6 frozen
[  235.403830] ata1.00: irq_stat 0x08000000, interface fatal error
[  235.403835] ata1: SError: { UnrecovData Handshk }
[  235.403839] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.403849] ata1.00: cmd 61/00:00:d8:e1:c8/0a:00:0f:00:00/40 tag 0 ncq dma 1310720 ou
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.403854] ata1.00: status: { DRDY }
[  235.403857] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.403866] ata1.00: cmd 61/a8:08:d8:eb:c8/00:00:0f:00:00/40 tag 1 ncq dma 86016 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.403870] ata1.00: status: { DRDY }
[  235.403874] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.403883] ata1.00: cmd 61/08:10:50:32:b0/00:00:0f:00:00/40 tag 2 ncq dma 4096 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.403887] ata1.00: status: { DRDY }
[  235.403890] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.403899] ata1.00: cmd 61/b8:18:20:0f:b8/02:00:0f:00:00/40 tag 3 ncq dma 356352 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.403903] ata1.00: status: { DRDY }
[  235.403906] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.403915] ata1.00: cmd 61/f0:20:e0:45:bc/08:00:0f:00:00/40 tag 4 ncq dma 1171456 ou
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.403919] ata1.00: status: { DRDY }
[  235.403922] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.403931] ata1.00: cmd 61/10:28:90:15:b0/00:00:0f:00:00/40 tag 5 ncq dma 8192 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.403935] ata1.00: status: { DRDY }
[  235.403938] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.403947] ata1.00: cmd 61/10:30:a0:28:b0/00:00:0f:00:00/40 tag 6 ncq dma 8192 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.403951] ata1.00: status: { DRDY }
[  235.403954] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.403963] ata1.00: cmd 61/10:38:48:33:b0/00:00:0f:00:00/40 tag 7 ncq dma 8192 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.403967] ata1.00: status: { DRDY }
[  235.403970] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.403979] ata1.00: cmd 61/08:40:88:33:b0/00:00:0f:00:00/40 tag 8 ncq dma 4096 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.403983] ata1.00: status: { DRDY }
[  235.403986] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.403995] ata1.00: cmd 61/08:48:a0:33:b0/00:00:0f:00:00/40 tag 9 ncq dma 4096 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.403999] ata1.00: status: { DRDY }
[  235.404002] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404011] ata1.00: cmd 61/08:50:78:34:b0/00:00:0f:00:00/40 tag 10 ncq dma 4096 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404015] ata1.00: status: { DRDY }
[  235.404019] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404028] ata1.00: cmd 61/48:58:38:0d:b4/00:00:0f:00:00/40 tag 11 ncq dma 36864 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404032] ata1.00: status: { DRDY }
[  235.404035] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404044] ata1.00: cmd 61/48:60:f0:0f:b4/00:00:0f:00:00/40 tag 12 ncq dma 36864 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404048] ata1.00: status: { DRDY }
[  235.404051] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404060] ata1.00: cmd 61/48:68:40:10:b4/00:00:0f:00:00/40 tag 13 ncq dma 36864 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404064] ata1.00: status: { DRDY }
[  235.404067] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404076] ata1.00: cmd 61/60:70:d8:1b:b4/00:00:0f:00:00/40 tag 14 ncq dma 49152 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404080] ata1.00: status: { DRDY }
[  235.404083] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404092] ata1.00: cmd 61/78:78:b0:2b:b4/00:00:0f:00:00/40 tag 15 ncq dma 61440 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404095] ata1.00: status: { DRDY }
[  235.404099] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404107] ata1.00: cmd 61/b0:80:48:95:b4/00:00:0f:00:00/40 tag 16 ncq dma 90112 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404111] ata1.00: status: { DRDY }
[  235.404115] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404123] ata1.00: cmd 61/70:88:e0:33:bc/08:00:0f:00:00/40 tag 17 ncq dma 1105920 ou
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404127] ata1.00: status: { DRDY }
[  235.404131] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404139] ata1.00: cmd 61/00:90:00:18:29/0a:00:04:00:00/40 tag 18 ncq dma 1310720 ou
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404143] ata1.00: status: { DRDY }
[  235.404147] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404156] ata1.00: cmd 61/60:a0:00:8a:c8/06:00:0f:00:00/40 tag 20 ncq dma 835584 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404160] ata1.00: status: { DRDY }
[  235.404163] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404172] ata1.00: cmd 61/10:a8:70:09:b0/00:00:0f:00:00/40 tag 21 ncq dma 8192 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404176] ata1.00: status: { DRDY }
[  235.404179] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404188] ata1.00: cmd 61/08:b0:b0:31:b0/00:00:0f:00:00/40 tag 22 ncq dma 4096 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404191] ata1.00: status: { DRDY }
[  235.404195] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404203] ata1.00: cmd 61/10:b8:f8:31:b0/00:00:0f:00:00/40 tag 23 ncq dma 8192 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404207] ata1.00: status: { DRDY }
[  235.404211] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404219] ata1.00: cmd 61/80:c0:80:0b:b4/00:00:0f:00:00/40 tag 24 ncq dma 65536 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404223] ata1.00: status: { DRDY }
[  235.404227] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404236] ata1.00: cmd 61/00:c8:00:98:b4/02:00:0f:00:00/40 tag 25 ncq dma 262144 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404240] ata1.00: status: { DRDY }
[  235.404243] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404251] ata1.00: cmd 61/00:d0:d8:d1:c8/0a:00:0f:00:00/40 tag 26 ncq dma 1310720 ou
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404255] ata1.00: status: { DRDY }
[  235.404259] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404267] ata1.00: cmd 61/10:d8:40:0a:b0/00:00:0f:00:00/40 tag 27 ncq dma 8192 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404271] ata1.00: status: { DRDY }
[  235.404275] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404283] ata1.00: cmd 61/10:e0:e0:0a:b0/00:00:0f:00:00/40 tag 28 ncq dma 8192 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404287] ata1.00: status: { DRDY }
[  235.404291] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404299] ata1.00: cmd 61/08:e8:38:32:b0/00:00:0f:00:00/40 tag 29 ncq dma 4096 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404303] ata1.00: status: { DRDY }
[  235.404306] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404315] ata1.00: cmd 61/48:f0:80:37:b0/00:00:0f:00:00/40 tag 30 ncq dma 36864 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404319] ata1.00: status: { DRDY }
[  235.404322] ata1.00: failed command: WRITE FPDMA QUEUED
[  235.404331] ata1.00: cmd 61/00:f8:d8:db:c8/06:00:0f:00:00/40 tag 31 ncq dma 786432 out
                        res 40/00:a8:70:09:b0/00:00:0f:00:00/40 Emask 0x10 (ATA bus error)
[  235.404335] ata1.00: status: { DRDY }
[  235.404340] ata1: hard resetting link
[  235.718788] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  235.719400] ata1.00: supports DRM functions and may not be fully accessible
[  235.723332] ata1.00: supports DRM functions and may not be fully accessible
[  235.726499] ata1.00: configured for UDMA/133
[  235.726571] ata1: EH complete
[  235.731319] ata1.00: Enabling discard_zeroes_data


Σου λέει κάτι χρήσιμο?
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 556
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό bobptz » 06 Ιούλ 2019, 18:15

Εδώ βλέπω κάτι errors:

Κώδικας: Επιλογή όλων
[   76.678885] ata1.00: irq_stat 0x08000000, interface fatal error
[   76.678889] ata1: SError: { UnrecovData Handshk }
[   76.678898] ata1.00: cmd 61/08:00:d0:18:68/00:00:10:00:00/40 tag 0 ncq dma 4096 out
                        res 40/00:d8:30:17:68/00:00:10:00:00/40 Emask 0x10 (ATA bus error)


Σημαίνουν κάτι κακό?
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 556
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό the_eye » 08 Ιούλ 2019, 17:47

Ναι, ή ο δίσκος έχει πρόβλημα ή η μητρική.
Για τον δίσκο δες εδώ
viewtopic.php?f=9&t=19749
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 18.04 bionic 4.15.0-42-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel Sky Lake Integrated Graphics [8086:1912] {i915_bpo}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11455
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό bobptz » 08 Ιούλ 2019, 19:32

the_eye έγραψε:Ναι, ή ο δίσκος έχει πρόβλημα ή η μητρική.

Τώρα μάλιστα!

Έχω δύο δίσκους. Το OS είναι εγκατεστημένο εδώ (SSD δίσκος):
Samsung SSD 860 EVO 250GB

Και έχω έναν άλλο HDD 1TB συμβατικό, για τα data. Μπορείς να καταλάβεις που αναφέρεται το πρόβλημα, ή η μόνη ελπίδα είναι να το δω από τα διαγνωστικά του δίσκου (από το λινκ που μου έδωσες)?

Αν φταίει το motherboard, σημαίνει ότι αν μπουτάρω με LIVE USB, πρέπει να μου παρουσιάσει το ίδιο πρόβλημα, σωστά?
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 556
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό the_eye » 09 Ιούλ 2019, 23:35

Κώδικας: Επιλογή όλων
[    1.357640] ata1.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133


Εδώ είναι το σφάλμα. Στον SSD.
Το usb είναι σε άλλον controler, οπότε δεν σημαίνει τίποτα αν bootάρεις από usb.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 18.04 bionic 4.15.0-42-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel Sky Lake Integrated Graphics [8086:1912] {i915_bpo}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11455
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό bobptz » 10 Ιούλ 2019, 01:10

the_eye έγραψε:Εδώ είναι το σφάλμα. Στον SSD.
Το usb είναι σε άλλον controler, οπότε δεν σημαίνει τίποτα αν bootάρεις από usb.


Σε ευχαριστώ που το εντόπισες στον SSD. Στον controller είναι το πρόβλημα ή στο δίσκο? Μήπως αν συνδέσω τον SSD σε άλλο καλώδιο SATA, να στρώσει? Είμαστε σε κατάσταση μετακόμισης και ακόμα δεν πρόλαβα να τον ελέγξω.

Αυτός είναι καλός δίσκος και τον έχω ακριβώς ένα χρόνο.
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 556
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό bobptz » 10 Ιούλ 2019, 07:59

Έτρεξα το διαγνωστικό, μάλλον είναι ενεργοποιημένο και κρατάει στατιστικά, ε?

Κώδικας: Επιλογή όλων
$ sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.18.0-25-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     Samsung SSD 860 EVO 250GB
Serial Number:    S3YJNB0K518341D
LU WWN Device Id: 5 002538 e403bfdac
Firmware Version: RVT01B6Q
User Capacity:    250.059.350.016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   Unknown(0x09fc), ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Jul 10 07:47:16 2019 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (    0) seconds.
Offline data collection
capabilities:           (0x53) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               No Offline surface scan supported.
               Self-test supported.
               No Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     (  85) minutes.
SCT capabilities:           (0x003d)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       2142
12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       1331
177 Wear_Leveling_Count     0x0013   099   099   000    Pre-fail  Always       -       6
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   064   054   000    Old_age   Always       -       36
195 Hardware_ECC_Recovered  0x001a   200   200   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x003e   098   098   000    Old_age   Always       -       1044
235 Unknown_Attribute       0x0012   099   099   000    Old_age   Always       -       36
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       4149240522

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1668         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Από αυτά που διάβασα, αυτό είναι το μόνο χρήσιμο, και πρέπει να προσέξω να μην αυξάνεται:
Κώδικας: Επιλογή όλων
199 UDMA_CRC_Error_Count    0x003e   098   098   000    Old_age   Always       -       1044
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 556
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό bobptz » 10 Ιούλ 2019, 08:09

bobptz έγραψε:Από αυτά που διάβασα, αυτό είναι το μόνο χρήσιμο, και πρέπει να προσέξω να μην αυξάνεται:

Κώδικας: Επιλογή όλων
199 UDMA_CRC_Error_Count 0x003e 098 098 000 Old_age Always - 1044


Έκανα επανεκκίνηση και αυξήθηκε από 1044 σε 1048:
Κώδικας: Επιλογή όλων
199 UDMA_CRC_Error_Count    0x003e   098   098   000    Old_age   Always       -       1048


Παρεμπιπτόντως, να και οι τιμές του HDD (data):
Κώδικας: Επιλογή όλων
$ sudo smartctl -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.18.0-25-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-00BN5A0
Serial Number:    WD-WMC3F1041248
LU WWN Device Id: 5 0014ee 0ae6554ce
Firmware Version: 01.01A01
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Jul 10 08:07:40 2019 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)   Offline data collection activity
               was completed without error.
               Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (11280) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 117) minutes.
Conveyance self-test routine
recommended polling time:     (   5) minutes.
SCT capabilities:           (0x3035)   SCT Status supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   172   164   021    Pre-fail  Always       -       2383
  4 Start_Stop_Count        0x0032   094   094   000    Old_age   Always       -       6284
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   082   082   000    Old_age   Always       -       13669
10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   094   094   000    Old_age   Always       -       6284
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       161
193 Load_Cycle_Count        0x0032   198   198   000    Old_age   Always       -       6122
194 Temperature_Celsius     0x0022   104   099   000    Old_age   Always       -       39
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     13196         -
# 2  Short offline       Completed without error       00%       803         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Εδώ φαίνεται καθαρά το Raw_Read_Error_Rate, το οποίο όμως δεν υπάρχει στον SSD:
Κώδικας: Επιλογή όλων
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 556
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Επόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Λειτουργικό Σύστημα

cron