Χαμηλή ταχύτητα στο ίντερνετ [ΕΠΙΛΥΘΗΚΕ]

[wm25console]

Γειά σας και από μένα.....είμαι σχετικά νέος στο linux και αντιμετωπίζω το εξής πρόβλημα......
Στο partition του σκληρού μου στο οποίο έχω εγκατεστημένα τα χρ όταν κάνω μετρηση ταχύτητας συγκεκριμένα από την ιστιοσελίδα http://www.speedtest.net μου δείχνει μία ταχύτητα που κυμαίνεται από 5000 Κbps έως 6300 Κbps ανάλογα και την ώρα βέβαια.
Κι έρχομαι στο πρόβλημα τώρα.....
Όταν ανοίγω linux και firefox κάνοντας την ίδια μέτρηση στην ίδια ιστιοσελίδα δεν πιάνω ποτέ ταχύτητα μεγαλύτερη των 800 με 850 Kbps.
Και γενικότερα όμως η διαφορά στην ταχύτητα είναι φανερή αφού κατεβάζω πολύ αργα τα πάντα.....από τις ενημερώσεις των linux μέχρι και δεδομένα από το rapidshare για παράδειγμα......
Κάνω κάτι λάθος, υπάρχουν έξτρα ρυθμίσεις ή ασφαλιστικές διατάξεις...??
Help me please.....
Ευχαριστώ προκαταβολικώς!!!!!

[ftso]

Καλώς ήρθες

Εκτέλεσε αυτό το τέστ εδώ (http://ndt.grnet.gr:7123/) και απο windows και απο ubuntu και δώσε μας και τα δυο αποτελέσματα.
Προσοχή, δεν θα πρέπει να απασχολείς το δίκτυο (updates, downloads κτλ) την ώρα που το εκτελείς...

Επίσης πες μας πως συνδέεσαι στο Internet...
Πιο απο τα παρακάτω?
-Με ethernet, modem/router
-Mε usb, modem/router
-Με usb, modem
-Mε wifi, modem/router
-Mε mobile Internet

[wm25console]

Λοιπόν εκτέλεσα τα τεστ και τα αποτελέσματα ήταν τα εξείς:

Με λειτουργικό ubuntu:
client to server 842.0 kbps
server to client 730.99 kbps

Με λειτουργικό xp:
client to server 676.0 kbps
server to client 593.01 kbps

Επίσης αμέσως μετά την μέτρηση με xp έτρεξα εκ νέου το τεστ στο speedtest.net κι έβγαλε download 2465 kbps & upload 170 kbps.....

Η σύνδεση που χρησιμοποιώ είναι από πάροχο vivodi και συνδέομαι ασύρματα με το router μου.

Μάλλον κάτι συμβαίνει.....

[headless]

Κατ'εμέ τα διάφορα speed tests δεν είναι και τόσο αξιόπιστα.
Πιο αντιπροσωπευτικό δείγμα για την ταχύτητά σου θα πάρεις αν κατεβάσεις κάτι απο τoν ftp server του παρόχου σου.ή απο κάποιον "δυνατό" server του εξωτερικού
(Ati,Nvidia,Microsoft)
Αναφέρεις οτι συνδέεσαι ασύρματα,ίσως αυτή να είναι η αιτία του προβλήματος.
Τί ασύρματη κάρτα δικτύου έχεις και ποιούς drivers χρησιμοποιείς;
Δοκίμασε επίσης να συνδεθείς ενσύρματα μέσω Ethernet και τσέκαρε ξανά την ταχύτητα.

[ftso]

Λοιπόν εκτέλεσα τα τεστ και τα αποτελέσματα ήταν τα εξείς:

Με λειτουργικό ubuntu:
client to server 842.0 kbps
server to client 730.99 kbps

Με λειτουργικό xp:
client to server 676.0 kbps
server to client 593.01 kbps

Τα παραπάνω δείχνουν ότι είτε σε linux είτε σε win έχεις την ίδια ταχύτητα.
Αν τα αποτελέσματα τα έγραψες σωστά τότε έχεις πρόβλημα το οποίο δεν αφορά το λειτουργικό...

Επίσης αμέσως μετά την μέτρηση με xp έτρεξα εκ νέου το τεστ στο speedtest.net κι έβγαλε download 2465 kbps & upload 170 kbps.....

Η σύνδεση που χρησιμοποιώ είναι από πάροχο vivodi και συνδέομαι ασύρματα με το router μου.

Μάλλον κάτι συμβαίνει.....

Το speedtest που σου έδωσα εγώ είναι το πιο αξιόπιστο για Ελλάδα.

Αυτά που πρέπει να τσεκάρεις είναι:
1)Η ασφάλεια του ασύρματου δικτύου είναι WPA2 (ίσως κάποιος σου κλέβει bandwidth)
2)Αν έχει πρόβλημα η κάρτα δικτύου σου. Χαμηλό σήμα,προβληματικός driver κτλ...
Για να τσεκάρεις αυτό, δοκίμασε να εκτελέσεις το τεστ που σου έδωσα ενώ θα είσαι συνδεδεμένος με καλώδιο και να μας ποστάρεις ακριβώς τα αποτελέσματα (Copy-paste).
3)Αν ο παροχος σου έχει πρόβλημα στην περιοχή σου.

[wm25console]

Βασικά επειδή είμαι λίγο αρχάριος πως θα μπορουσα να δω στο linux, ποιά κάρτα δικτύου έχω και ποιά driver?
Και σε περίπτωση που είναι λάθος πως θα το καταλάβω και πως θα βάλω τα σωστά?
Ευχαριστώ!!

[linuxman]

Βασικά επειδή είμαι λίγο αρχάριος πως θα μπορουσα να δω στο linux, ποιά κάρτα δικτύου έχω και ποιά driver?
Και σε περίπτωση που είναι λάθος πως θα το καταλάβω και πως θα βάλω τα σωστά?
Ευχαριστώ!!

Από την εντολή

Κώδικας: Επιλογή όλων

lspci -nn

η και

Κώδικας: Επιλογή όλων

lsusb

βλέπουμε τι κάρτα έχουμε και με το

Κώδικας: Επιλογή όλων

lsmod

και

Κώδικας: Επιλογή όλων

dmesg

βλέπουμε τι και ποιο driver έχει σηκώσει στην εκκίνηση

[linuxman]

Προσπαθώ να βάλω τις εντολές αλλά οι τρεις πρώτες αναφέρουν ότι command not found και η τρίτη βγάζει το αστρονομικό παράθυρο το οποίο παραθέτω παρακάτω με copy-paste διοτι δεν μπορω να καταλάβω και πολλά.
Ευχαριστώ για την κατανόηση.

Κώδικας: Επιλογή όλων

[ 0.512605] PCI: 0000:01:00.0 reg 14 64bit mmio: [c0000000, cfffffff]
[ 0.512614] PCI: 0000:01:00.0 reg 1c 64bit mmio: [dc000000, dcffffff]
[ 0.512620] PCI: 0000:01:00.0 reg 24 io port: [2000, 207f]
[ 0.512626] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.512691] PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
[ 0.512695] PCI: bridge 0000:00:01.0 32bit mmio: [dc000000, ddffffff]
[ 0.512700] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff]
[ 0.512884] PCI: 0000:02:00.0 reg 10 32bit mmio: [d8000000, d8000fff]
[ 0.513093] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.513106] pci 0000:02:00.0: PME# disabled
[ 0.513159] PCI: bridge 0000:00:1c.0 io port: [3000, 3fff]
[ 0.513164] PCI: bridge 0000:00:1c.0 32bit mmio: [d8000000, d9ffffff]
[ 0.513173] PCI: bridge 0000:00:1c.0 64bit mmio pref: [d2000000, d3ffffff]
[ 0.513234] PCI: bridge 0000:00:1c.1 io port: [4000, 4fff]
[ 0.513239] PCI: bridge 0000:00:1c.1 32bit mmio: [d6000000, d7ffffff]
[ 0.513247] PCI: bridge 0000:00:1c.1 64bit mmio pref: [d0000000, d1ffffff]
[ 0.513332] PCI: 0000:05:00.0 reg 10 32bit mmio: [da000000, da01ffff]
[ 0.513357] PCI: 0000:05:00.0 reg 18 io port: [5000, 501f]
[ 0.513447] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.513455] pci 0000:05:00.0: PME# disabled
[ 0.513507] PCI: bridge 0000:00:1c.2 io port: [5000, 5fff]
[ 0.513513] PCI: bridge 0000:00:1c.2 32bit mmio: [da000000, dbffffff]
[ 0.513521] PCI: bridge 0000:00:1c.2 64bit mmio pref: [d4000000, d5ffffff]
[ 0.513575] PCI: 0000:07:05.0 reg 10 32bit mmio: [de000000, de0007ff]
[ 0.513631] pci 0000:07:05.0: supports D1
[ 0.513632] pci 0000:07:05.0: supports D2
[ 0.513634] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.513640] pci 0000:07:05.0: PME# disabled
[ 0.513677] PCI: 0000:07:05.1 reg 10 32bit mmio: [de000800, de0008ff]
[ 0.513734] pci 0000:07:05.1: supports D1
[ 0.513736] pci 0000:07:05.1: supports D2
[ 0.513737] pci 0000:07:05.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.513743] pci 0000:07:05.1: PME# disabled
[ 0.513781] PCI: 0000:07:05.2 reg 10 32bit mmio: [de000c00, de000cff]
[ 0.513837] pci 0000:07:05.2: supports D1
[ 0.513839] pci 0000:07:05.2: supports D2
[ 0.513841] pci 0000:07:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.513846] pci 0000:07:05.2: PME# disabled
[ 0.513883] PCI: 0000:07:05.3 reg 10 32bit mmio: [de001000, de0010ff]
[ 0.513941] pci 0000:07:05.3: supports D1
[ 0.513942] pci 0000:07:05.3: supports D2
[ 0.513944] pci 0000:07:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.513949] pci 0000:07:05.3: PME# disabled
[ 0.513988] PCI: 0000:07:05.4 reg 10 32bit mmio: [de001400, de0014ff]
[ 0.514044] pci 0000:07:05.4: supports D1
[ 0.514045] pci 0000:07:05.4: supports D2
[ 0.514047] pci 0000:07:05.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.514053] pci 0000:07:05.4: PME# disabled
[ 0.514110] pci 0000:00:1e.0: transparent bridge
[ 0.514118] PCI: bridge 0000:00:1e.0 32bit mmio: [de000000, de0fffff]
[ 0.514154] bus 00 -> node 0
[ 0.514161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.514541] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.514700] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.514851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.514998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.515160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.520413] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 0.520413] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
[ 0.520473] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
[ 0.520621] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
[ 0.520768] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[ 0.520915] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[ 0.521064] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[ 0.521212] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
[ 0.524109] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.524123] pnp: PnP ACPI init
[ 0.524123] ACPI: bus type pnp registered
[ 0.524675] pnp: PnP ACPI: found 10 devices
[ 0.524675] ACPI: ACPI bus type pnp unregistered
[ 0.524675] PnPBIOS: Disabled by ACPI PNP
[ 0.528057] PCI: Using ACPI for IRQ routing
[ 0.532040] NET: Registered protocol family 8
[ 0.532043] NET: Registered protocol family 20
[ 0.532060] NetLabel: Initializing
[ 0.532060] NetLabel: domain hash size = 128
[ 0.532060] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.532070] NetLabel: unlabeled traffic allowed by default
[ 0.532078] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.532083] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.533562] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.533565] actual entries 65620
[ 0.533648] AppArmor: AppArmor Filesystem Enabled
[ 0.533676] ACPI: RTC can wake from S4
[ 0.536040] Switched to high resolution mode on CPU 0
[ 0.536726] Switched to high resolution mode on CPU 1
[ 0.540022] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.540025] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 0.540029] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 0.540032] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 0.540035] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.540038] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 0.540041] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 0.540044] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 0.540052] system 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 0.540059] system 00:05: ioport range 0x380-0x383 has been reserved
[ 0.540062] system 00:05: ioport range 0x680-0x69f has been reserved
[ 0.540065] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.540067] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 0.540070] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 0.540073] system 00:05: ioport range 0x1640-0x164f has been reserved
[ 0.540079] system 00:06: ioport range 0x6a0-0x6af has been reserved
[ 0.540082] system 00:06: ioport range 0x6b0-0x6ff has been reserved
[ 0.575253] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[ 0.575256] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.575259] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.575264] pci 0000:00:01.0: MEM window: 0xdc000000-0xddffffff
[ 0.575268] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.575273] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.575277] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.575283] pci 0000:00:1c.0: MEM window: 0xd8000000-0xd9ffffff
[ 0.575289] pci 0000:00:1c.0: PREFETCH window: 0x000000d2000000-0x000000d3ffffff
[ 0.575297] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.575300] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 0.575307] pci 0000:00:1c.1: MEM window: 0xd6000000-0xd7ffffff
[ 0.575312] pci 0000:00:1c.1: PREFETCH window: 0x000000d0000000-0x000000d1ffffff
[ 0.575320] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[ 0.575324] pci 0000:00:1c.2: IO window: 0x5000-0x5fff
[ 0.575330] pci 0000:00:1c.2: MEM window: 0xda000000-0xdbffffff
[ 0.575335] pci 0000:00:1c.2: PREFETCH window: 0x000000d4000000-0x000000d5ffffff
[ 0.575344] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 0.575346] pci 0000:00:1e.0: IO window: disabled
[ 0.575352] pci 0000:00:1e.0: MEM window: 0xde000000-0xde0fffff
[ 0.575357] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.575372] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.575376] pci 0000:00:01.0: setting latency timer to 64
[ 0.575385] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.575391] pci 0000:00:1c.0: setting latency timer to 64
[ 0.575400] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.575405] pci 0000:00:1c.1: setting latency timer to 64
[ 0.575415] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.575420] pci 0000:00:1c.2: setting latency timer to 64
[ 0.575426] pci 0000:00:1e.0: enabling device (0004 -> 0006)
[ 0.575433] pci 0000:00:1e.0: setting latency timer to 64
[ 0.575437] bus: 00 index 0 io port: [0, ffff]
[ 0.575440] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.575442] bus: 01 index 0 io port: [2000, 2fff]
[ 0.575444] bus: 01 index 1 mmio: [dc000000, ddffffff]
[ 0.575446] bus: 01 index 2 mmio: [c0000000, cfffffff]
[ 0.575448] bus: 01 index 3 mmio: [0, 0]
[ 0.575450] bus: 02 index 0 io port: [3000, 3fff]
[ 0.575452] bus: 02 index 1 mmio: [d8000000, d9ffffff]
[ 0.575454] bus: 02 index 2 mmio: [d2000000, d3ffffff]
[ 0.575456] bus: 02 index 3 mmio: [0, 0]
[ 0.575458] bus: 03 index 0 io port: [4000, 4fff]
[ 0.575460] bus: 03 index 1 mmio: [d6000000, d7ffffff]
[ 0.575462] bus: 03 index 2 mmio: [d0000000, d1ffffff]
[ 0.575464] bus: 03 index 3 mmio: [0, 0]
[ 0.575466] bus: 05 index 0 io port: [5000, 5fff]
[ 0.575468] bus: 05 index 1 mmio: [da000000, dbffffff]
[ 0.575470] bus: 05 index 2 mmio: [d4000000, d5ffffff]
[ 0.575472] bus: 05 index 3 mmio: [0, 0]
[ 0.575474] bus: 07 index 0 mmio: [0, 0]
[ 0.575476] bus: 07 index 1 mmio: [de000000, de0fffff]
[ 0.575478] bus: 07 index 2 mmio: [0, 0]
[ 0.575480] bus: 07 index 3 io port: [0, ffff]
[ 0.575482] bus: 07 index 4 mmio: [0, ffffffff]
[ 0.575490] NET: Registered protocol family 2
[ 0.588050] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.588275] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.588611] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.588782] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.588785] TCP reno registered
[ 0.592062] NET: Registered protocol family 1
[ 0.592166] checking if image is initramfs... it is
[ 1.278334] Freeing initrd memory: 8012k freed
[ 1.278527] Simple Boot Flag at 0x35 set to 0x1
[ 1.279511] audit: initializing netlink socket (disabled)
[ 1.279537] type=2000 audit(1232384919.277:1): initialized
[ 1.285483] highmem bounce pool size: 64 pages
[ 1.285490] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.288009] VFS: Disk quotas dquot_6.5.1
[ 1.288099] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.288210] msgmni has been set to 1743
[ 1.288333] io scheduler noop registered
[ 1.288336] io scheduler anticipatory registered
[ 1.288339] io scheduler deadline registered
[ 1.288350] io scheduler cfq registered (default)
[ 1.288478] pci 0000:01:00.0: Boot video device
[ 1.288606] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.288645] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.288679] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.288726] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.288821] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.288871] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.288918] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.288962] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.289009] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.289124] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.289173] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.289220] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.289269] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.289313] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.289429] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.289478] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.289526] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.289570] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.289613] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.289991] isapnp: Scanning for PnP cards...
[ 1.643830] isapnp: No Plug & Play device found
[ 1.677512] hpet_resources: 0xfed00000 is busy
[ 1.677580] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.679883] brd: module loaded
[ 1.679952] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.680077] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.696420] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.696426] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.700114] mice: PS/2 mouse device common for all mice
[ 1.700248] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.700279] rtc0: alarms up to one month, y3k, hpet irqs
[ 1.700408] EISA: Probing bus 0 at eisa.0
[ 1.700415] Cannot allocate resource for EISA slot 1
[ 1.700418] Cannot allocate resource for EISA slot 2
[ 1.700420] Cannot allocate resource for EISA slot 3
[ 1.700422] Cannot allocate resource for EISA slot 4
[ 1.700424] Cannot allocate resource for EISA slot 5
[ 1.700439] EISA: Detected 0 cards.
[ 1.700442] cpuidle: using governor ladder
[ 1.700445] cpuidle: using governor menu
[ 1.700947] TCP cubic registered
[ 1.700973] Using IPI No-Shortcut mode
[ 1.701153] registered taskstats version 1
[ 1.701265] Magic number: 9:264:138
[ 1.701270] block ram3: hash matches
[ 1.701352] rtc_cmos 00:07: setting system clock to 2009-01-19 17:08:41 UTC (1232384921)
[ 1.701355] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.701357] EDD information not available.
[ 1.701596] Freeing unused kernel memory: 424k freed
[ 1.701633] Write protecting the kernel text: 2580k
[ 1.701659] Write protecting the kernel read-only data: 940k
[ 1.732021] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.884117] fuse init (API version 7.9)
[ 1.963404] ACPI: SSDT 7FE7E646, 01E5 (r1 HP 30BD 3000 INTL 20050624)
[ 1.963779] ACPI: SSDT 7FE7E3E5, 01DC (r1 HP 30BD 3001 INTL 20050624)
[ 1.964335] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.964389] processor ACPI0007:00: registered as cooling_device0
[ 1.964393] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.964776] ACPI: SSDT 7FE7E82B, 0094 (r1 HP 30BD 3000 INTL 20050624)
[ 1.965124] ACPI: SSDT 7FE7E5C1, 0085 (r1 HP 30BD 3000 INTL 20050624)
[ 1.965642] Marking TSC unstable due to TSC halts in idle
[ 1.965825] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.965880] processor ACPI0007:01: registered as cooling_device1
[ 1.965884] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.981330] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.990882] ACPI: Thermal Zone [THR1] (28 C)
[ 2.295587] usbcore: registered new interface driver usbfs
[ 2.295610] usbcore: registered new interface driver hub
[ 2.295641] usbcore: registered new device driver usb
[ 2.297779] USB Universal Host Controller Interface driver v3.0
[ 2.297830] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.297838] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.297842] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.297881] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.297917] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[ 2.298057] usb usb1: configuration #1 chosen from 1 choice
[ 2.298083] hub 1-0:1.0: USB hub found
[ 2.298089] hub 1-0:1.0: 2 ports detected
[ 2.308557] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 2.308559] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 2.376516] No dock devices found.
[ 2.393825] SCSI subsystem initialized
[ 2.401246] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.401255] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.401259] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.401286] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.401325] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 2.401417] usb usb2: configuration #1 chosen from 1 choice
[ 2.401444] hub 2-0:1.0: USB hub found
[ 2.401451] hub 2-0:1.0: 2 ports detected
[ 2.411571] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.428214] libata version 3.00 loaded.
[ 2.609286] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.609297] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.609302] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.609328] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.609366] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 2.609468] usb usb3: configuration #1 chosen from 1 choice
[ 2.609495] hub 3-0:1.0: USB hub found
[ 2.609501] hub 3-0:1.0: 2 ports detected
[ 2.713557] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.713567] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.713572] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.713596] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.713633] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 2.713729] usb usb4: configuration #1 chosen from 1 choice
[ 2.713757] hub 4-0:1.0: USB hub found
[ 2.713763] hub 4-0:1.0: 2 ports detected
[ 2.721119] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 2.816504] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.816519] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.816523] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.816547] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.820454] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.820461] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.820468] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xde304000
[ 2.849032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.849148] usb usb5: configuration #1 chosen from 1 choice
[ 2.849175] hub 5-0:1.0: USB hub found
[ 2.849182] hub 5-0:1.0: 8 ports detected
[ 3.000119] Clocksource tsc unstable (delta = -221961092 ns)
[ 3.056401] ata_piix 0000:00:1f.1: version 2.12
[ 3.056413] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.056455] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.056554] scsi0 : ata_piix
[ 3.056669] scsi1 : ata_piix
[ 3.057256] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[ 3.057259] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[ 3.220619] ata1.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HQ04, max MWDMA2
[ 3.240548] ata1.00: configured for MWDMA2
[ 3.240643] ata2: port disabled. ignoring.
[ 3.244910] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HQ04 PQ: 0 ANSI: 5
[ 3.245126] e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.245137] e1000e 0000:05:00.0: setting latency timer to 64
[ 3.246023] ahci 0000:00:1f.2: version 3.0
[ 3.246033] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.246135] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 3.246138] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 3.246144] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.246312] scsi2 : ahci
[ 3.246373] scsi3 : ahci
[ 3.246432] scsi4 : ahci
[ 3.246489] scsi5 : ahci
[ 3.246588] ata3: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304500 irq 219
[ 3.246590] ata4: DUMMY
[ 3.246593] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
[ 3.246595] ata6: DUMMY
[ 3.248064] usb 2-1: device not accepting address 2, error -71
[ 3.308151] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 3.364717] 0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:36:98:fa:34
[ 3.364720] 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.364796] 0000:05:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 3.364821] ohci1394 0000:07:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.364828] ohci1394 0000:07:05.0: setting latency timer to 64
[ 3.417533] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[de000000-de0007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.564095] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.564852] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3.564858] ata3.00: ATA-7: FUJITSU MHV2100BH PL, 892C, max UDMA/100
[ 3.564861] ata3.00: 195371568 sectors, multi 16: LBA48
[ 3.567603] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3.567620] ata3.00: configured for UDMA/100
[ 3.728128] usb 5-4: new high speed USB device using ehci_hcd and address 3
[ 3.864121] usb 5-4: configuration #1 chosen from 1 choice
[ 4.216124] usb 2-1: new low speed USB device using uhci_hcd and address 4
[ 4.304143] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.304886] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 4.304890] ata5.00: ATA-7: FUJITSU MHV2100BH PL, 892C, max UDMA/100
[ 4.304893] ata5.00: 195371568 sectors, multi 16: LBA48
[ 4.307626] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 4.307642] ata5.00: configured for UDMA/100
[ 4.320344] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHV2100B 892C PQ: 0 ANSI: 5
[ 4.320475] scsi 4:0:0:0: Direct-Access ATA FUJITSU MHV2100B 892C PQ: 0 ANSI: 5
[ 4.332212] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.332248] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 4.332283] scsi 4:0:0:0: Attached scsi generic sg2 type 0
[ 4.361496] Driver 'sd' needs updating - please use bus_type methods
[ 4.361605] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 4.361621] sd 2:0:0:0: [sda] Write Protect is off
[ 4.361624] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.361650] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.361719] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 4.361734] sd 2:0:0:0: [sda] Write Protect is off
[ 4.361736] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.361761] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.361765] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 4.383799] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.383806] Uniform CD-ROM driver Revision: 3.20
[ 4.383960] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.392634] usb 2-1: configuration #1 chosen from 1 choice
[ 4.440993] sda1 sda2 sda3
[ 4.441212] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.441289] sd 4:0:0:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
[ 4.441305] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.441308] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.441334] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.441391] sd 4:0:0:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
[ 4.441406] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.441408] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.441435] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.441438] sdb: sdb1
[ 4.522040] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 4.652068] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 4.696821] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc000ce33bf00]
[ 4.818672] usb 3-2: configuration #1 chosen from 1 choice
[ 4.821079] usbcore: registered new interface driver hiddev
[ 4.841999] input: MLK TURBO-X as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2
[ 4.853343] input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK TURBO-X] on usb-0000:00:1d.1-1
[ 4.853369] usbcore: registered new interface driver usbhid
[ 4.853372] usbhid: v2.6:USB HID core driver
[ 4.962251] kjournald starting. Commit interval 5 seconds
[ 4.962267] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.882338] udevd version 124 started
[ 12.240166] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.280401] iTCO_vendor_support: vendor-support=0
[ 12.319097] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 12.319178] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 12.319286] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.400148] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.476098] Linux agpgart interface v0.103
[ 12.591249] ACPI: AC Adapter [ACAD] (on-line)
[ 12.618691] ACPI: Battery Slot [BAT0] (battery absent)
[ 12.641338] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 12.665029] ACPI: Power Button (FF) [PWRF]
[ 12.665106] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 12.697020] ACPI: Power Button (CM) [PWRB]
[ 12.697084] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 12.729020] ACPI: Sleep Button (CM) [SLPB]
[ 12.729091] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 12.731608] ACPI: Lid Switch [LID]
[ 12.756064] intel_rng: FWH not detected
[ 12.769945] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 12.769948] ricoh-mmc: Copyright(c) Philip Langdale
[ 12.770263] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
[ 12.770283] ricoh-mmc: Controller is now disabled.
[ 12.904889] ACPI: WMI: Mapper loaded
[ 12.914631] sdhci: Secure Digital Host Controller Interface driver
[ 12.914634] sdhci: Copyright(c) Pierre Ossman
[ 13.116428] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 19)
[ 13.116443] sdhci-pci 0000:07:05.1: enabling device (0000 -> 0002)
[ 13.116451] sdhci-pci 0000:07:05.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 13.119502] mmc0: SDHCI controller on PCI [0000:07:05.1] using PIO
[ 13.317744] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7
[ 13.344025] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 13.344775] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input8
[ 13.372010] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.426881] Bluetooth: Core ver 2.13
[ 13.453467] NET: Registered protocol family 31
[ 13.453470] Bluetooth: HCI device and connection manager initialized
[ 13.453474] Bluetooth: HCI socket layer initialized
[ 13.719110] nvidia: module license 'NVIDIA' taints kernel.
[ 13.974955] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 13.974966] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.974974] nvidia 0000:01:00.0: setting latency timer to 64
[ 13.975114] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.12 Thu Jul 17 18:11:36 PDT 2008
[ 14.040047] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 14.040778] usbcore: registered new interface driver btusb
[ 14.202445] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 14.231918] Linux video capture interface: v2.00
[ 14.606884] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 14.606888] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 14.607239] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.607255] iwl3945 0000:02:00.0: setting latency timer to 64
[ 14.607277] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 14.648444] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 14.649071] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 14.686136] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1810)
[ 14.696782] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 14.697055] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).
[ 14.697061] uvcvideo: Failed to initialize the device (-5).
[ 14.697366] usbcore: registered new interface driver uvcvideo
[ 14.697373] USB Video Class driver (v0.1.0)
[ 14.802156] iwl3945 0000:02:00.0: PCI INT A disabled
[ 14.873244] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 14.929943] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.929972] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.933346] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 15.844150] lp: driver loaded but no devices found
[ 16.569066] EXT3 FS on sdb1, internal journal
[ 17.715516] type=1505 audit(1232377737.024:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4371
[ 17.877526] type=1505 audit(1232377737.188:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4376
[ 17.877710] type=1505 audit(1232377737.188:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4376
[ 18.065858] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.876204] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 19.977708] apm: BIOS not found.
[ 20.185537] ppdev: user-space parallel port driver
[ 25.727648] Bluetooth: L2CAP ver 2.11
[ 25.727658] Bluetooth: L2CAP socket layer initialized
[ 25.776178] Bluetooth: SCO (Voice Link) ver 0.6
[ 25.776187] Bluetooth: SCO socket layer initialized
[ 25.809895] Bluetooth: RFCOMM socket layer initialized
[ 25.810796] Bluetooth: RFCOMM TTY layer initialized
[ 25.810805] Bluetooth: RFCOMM ver 1.10
[ 25.827727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.827737] Bluetooth: BNEP filters: protocol multicast
[ 25.938884] Bridge firewalling registered
[ 30.316497] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 30.316665] iwl3945 0000:02:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
[ 30.319514] firmware: requesting iwlwifi-3945-1.ucode
[ 30.550270] Registered led device: iwl-phy0:radio
[ 30.551004] Registered led device: iwl-phy0:assoc
[ 30.552370] Registered led device: iwl-phy0:RX
[ 30.552552] Registered led device: iwl-phy0:TX
[ 32.032796] NET: Registered protocol family 17
[ 32.872071] wlan0: authenticate with AP 00:1c:a2:b3:ef:75
[ 33.072079] wlan0: authenticate with AP 00:1c:a2:b3:ef:75
[ 33.272084] wlan0: authenticate with AP 00:1c:a2:b3:ef:75
[ 33.297706] wlan0: authenticated
[ 33.297721] wlan0: associate with AP 00:1c:a2:b3:ef:75
[ 33.308210] wlan0: RX AssocResp from 00:1c:a2:b3:ef:75 (capab=0x461 status=0 aid=1)
[ 33.308221] wlan0: associated
[ 33.309038] wlan0: disassociating by local choice (reason=3)
[ 58.909462] wlan0: associate with AP 00:1c:a2:b3:ef:75
[ 58.914863] wlan0: RX ReassocResp from 00:1c:a2:b3:ef:75 (capab=0x461 status=0 aid=1)
[ 58.914873] wlan0: associated
[ 58.916503] wlan0: disassociating by local choice (reason=3)
[ 73.139920] CPU0 attaching NULL sched-domain.
[ 73.139937] CPU1 attaching NULL sched-domain.
[ 73.140085] CPU0 attaching sched-domain:
[ 73.140092] domain 0: span 0-1 level MC
[ 73.140098] groups: 0 1
[ 73.140109] CPU1 attaching sched-domain:
[ 73.140114] domain 0: span 0-1 level MC
[ 73.140119] groups: 1 0
[ 93.627001] wlan0: authenticate with AP 00:90:d0:f4:03:6b
[ 93.628801] wlan0: authenticated
[ 93.628810] wlan0: associate with AP 00:90:d0:f4:03:6b
[ 93.631317] wlan0: RX AssocResp from 00:90:d0:f4:03:6b (capab=0x411 status=0 aid=1)
[ 93.631325] wlan0: associated
[ 111.294538] NET: Registered protocol family 10
[ 111.295913] lo: Disabled Privacy Extensions
[ 111.297972] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 121.880105] wlan0: no IPv6 routers present

[linuxman]

Δεν μπορεί να μην δίνουν αποτέλεσμα 3 πρώτες .

[wm25console]

Άκυρο το προηγούμενο που έλεγα ότι δεν αναγνωρίζει την εντολή διότι την έκανα αντιγραφή και δούλεψε.....
Παραθέτω τα αποτελέσματα της πρώτης και της δεύτερης εντολής αντίστοιχα.

Κώδικας: Επιλογή όλων

00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
01:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce Go 7600] [10de:0398] (rev a1)
02:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
05:00.0 Ethernet controller [0200]: Intel Corporation 82573L Gigabit Ethernet Controller [8086:109a]
07:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832]
07:05.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
07:05.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 0a)
07:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 05)
07:05.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff)

Κώδικας: Επιλογή όλων

Bus 005 Device 003: ID 05ca:1810 Ricoh Co., Ltd
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 04fc:0538 Sunplus Technology Co., Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Από τις συσκευές στα χρ βλέπω ότι η κάρτα μου είναι η intel pro 1000 pl.

Κώδικας: Επιλογή όλων