Έλεγχος σκληρού δίσκου Hardware

[akounadis]

Πριν ένα χρόνο και δυο μήνες...

Κώδικας: Επιλογή όλων

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always - 2750
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2162
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 2760
10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 1
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1111
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 892
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 77
194 Temperature_Celsius 0x0022 112 097 000 Old_age Always - 42 (Lifetime Min/Max 16/47)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x0032 252 252 000 Old_age Always - 0
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 16
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 808

...24/11/2012...

Κώδικας: Επιλογή όλων

=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M6
Device Model: SAMSUNG HM320JI
Serial Number: S1G3JD0S426075
LU WWN Device Id: 5 0f0000 003426075
Firmware Version: 2SS00_03
User Capacity: 320.072.933.376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Sat Nov 24 18:05:37 2012 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 112) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always - 2812
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2904
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 3918
10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 1
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1499
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1005
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 111
194 Temperature_Celsius 0x0022 133 097 000 Old_age Always - 35 (Min/Max 16/47)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x0032 252 252 000 Old_age Always - 0
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 16
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 808

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

και σήμερα...

Κώδικας: Επιλογή όλων

=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M6
Device Model: SAMSUNG HM320JI
Serial Number: S1G3JD0S426075
LU WWN Device Id: 5 0f0000 003426075
Firmware Version: 2SS00_03
User Capacity: 320.072.933.376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Sat Jan 26 13:32:22 2013 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 112) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always - 2750
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3056
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 4232
10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 1
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1576
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1026
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 113
194 Temperature_Celsius 0x0022 136 097 000 Old_age Always - 34 (Min/Max 16/47)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x0032 252 252 000 Old_age Always - 0
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 16
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 808

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Διακρίνω μια αύξηση. Λογικά οφείλεται στο πέρασμα του χρόνου;

[Δημήτριος]

Τα δικά μου είναι τα εξής (PATA SSD):

Για το sda1 (boot διαμέρισμα Linux) και για το sda6 (το οποίο το βρίσκει καθαρό κατά την εκκίνηση).
viewtopic.php?f=4&t=25887&p=274715#p274715

[the_eye]

Μην δίνεις screenshot κάνε copy paste το κείμενο μέσα σε

Κώδικας: Επιλογή όλων

[code] κώδικας[/code]

[Δημήτριος]

Μην δίνεις screenshot κάνε copy paste το κείμενο μέσα σε

Κώδικας: Επιλογή όλων

[code] κώδικας[/code]

Στο νήμα που παραθέτω πιο πάνω, έχω τα αρχεία (sda1 και sda6) όπως το λές (μέσα σε [code]).

[the_eye]

Διακρίνω μια αύξηση. Λογικά οφείλεται στο πέρασμα του χρόνου;

Ναι, απλά πρόσεξε αυτό που αυξάνει

Κώδικας: Επιλογή όλων

191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 892

σημαίνει ότι έχει κραδασμούς εν ώρα λειτουργίας.
Δες με τι ταχύτητα δουλεύει η κεφαλή οπότε και ο παραμικρός κραδασμός είναι πρόβλημα

[dgtfeargr]

Ο Δίσκος του λάπτοπ:

Κώδικας: Επιλογή όλων

invisible@invisible-Aspire-7736:~$ sudo smartctl -a /dev/sda
[sudo] password for invisible:
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.5.0-22-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD5000BEVT-22ZAT0
Serial Number: WD-WXQ0A99J4715
LU WWN Device Id: 5 0014ee 2039148a1
Firmware Version: 01.01A01
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Jan 27 19:11:38 2013 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 154) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 3721
3 Spin_Up_Time 0x0027 185 176 021 Pre-fail Always - 1725
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3618
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 6828
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3556
192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 854
193 Load_Cycle_Count 0x0032 151 151 000 Old_age Always - 149242
194 Temperature_Celsius 0x0022 114 080 000 Old_age Always - 33
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

invisible@invisible-Aspire-7736:~$


και για τον εξωτερικό usb ο οποίος είναι αρκετά παλιός και θα είχανε ενδιαφέρον τα δεδομένα του βγάζει σφάλμα:

Κώδικας: Επιλογή όλων

invisible@invisible-Aspire-7736:~$ sudo smartctl -a /dev/sdb
[sudo] password for invisible:
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.5.0-22-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

/dev/sdb: Unknown USB bridge [0x1058:0x0901 (0x108)]
Smartctl: please specify device type with the -d option.

Use smartctl -h to get a usage summary


EDIT: Ενώ η εντολή sudo fdisk -l επιστρέφει:

Κώδικας: Επιλογή όλων

invisible@invisible-Aspire-7736:~$ sudo fdisk -l

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000ae09b

Device Boot Start End Blocks Id System
/dev/sda1 * 2048 959999999 479998976 83 Linux
/dev/sda2 960000000 976773167 8386584 82 Linux swap / Solaris

Disk /dev/sdb: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00009a1d

Device Boot Start End Blocks Id System
/dev/sdb1 * 63 488392064 244196001 7 HPFS/NTFS/exFAT
invisible@invisible-Aspire-7736:~$


[akounadis]

Πολύ ωραίο βίντεο !!
Ξέρεις όμως τι παρατηρώ; Πως όταν λειτουργεί το laptop η μετακινήσεις που κάνω είναι σπάνιες και συρτές στο τραπέζι ή στο γραφείο που δεν υπερβαίνει το 1cm.
Τον χρησιμοποιώ ως desktop (Δεν τον έχω μεταφέρει πότε ανοιχτό). Στην κορυφή των ποδιών μου, δεν ξέρω καν την αίσθηση πως είναι. Θα μου πεις... έστω και αυτό το λίγο...
Διάβασα αρκετά για τους SSD. Τελικά αυτό που διακρίνω η σημαντική διαφορά τους ακόμα με τους HDD πρέπει να είναι το κόστος. Έχουν διάρκεια ζωής και οι δυο, μπορεί να μην είναι συγκεκριμένη. Τεχνικά γνωρίζουμε τις διαφορές τους αλλά η μηχανική τεχνολογία καλά κρατεί...

[freefour]

Καλημερα σε ολους! Εβαλα τους καινουργιους δισκους, μπορουμε να ριξουμε μια ματια και εδω αν ειναι ενταξη;
Ο sda ειναι TOSHIBA και ο sdb Hitachi. Μου ειχε πει το παιδι οτι θα ειναι ιδιοι αλλα... τι να πεις; Ειχα περιπετιες απ την πρωτη τους χρηση κιολας. Μου ειπε οτι θα μπορεσει να τους κανει οπως θελω, ομως τα εκανε ολα μπαχαλο. Αντι να μου κανει 4 partition σε δυο δισκους που εκανα καταλαθος 6-7 Ηρθα σπιτι αλλα δεν καταφερα να τους στρωσω μονος και ξαναπηγα την αλλη μερα σε αλλον οπου εφαγε 8 ωρες να μου στρωση τουσ δισκους. Δεν μπορουσαμε να βρουμε το grub μετα απο καθε εγκατασταση. Ηθελε αντι για grub να μου βαλει ενα: eazy b cd και δεν τον αφησα. Νομιζα οτι θα ειχα προβλημα στο μελλον.(τελικα ειμαι grub.) Ζητησε και 60 € για 4 διανομες που εβαλε, με δικα μου dvd. (εδωσα οσα ειχα, 40.)
Καπου διαβασα με το GSmartControl για δυο σφαλματα στην εκκινηση καποιου απ τους δυο δισκους. Το τεστ φαινετε παρακατω αναλυτικα. Ηθελα να δω που λεει για τις ωρες ζωης των δισκων.
TOSHIBA dev/sda:

Κώδικας: Επιλογή όλων

smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.5.0-23-generic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA DT01ACA050
Serial Number: Z2CZBASFS
LU WWN Device Id: 5 000039 ff2cdcdba
Firmware Version: MS1OA750
User Capacity: 500,106,780,160 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Feb 2 17:28:11 2013 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5160) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 86) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 132 132 024 Pre-fail Always - 183 (Average 164)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 15
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 26
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 15
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 15
194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 13/32)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 8 hours (0 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 31 cf f7 0a 00 Error: UNC 49 sectors at LBA = 0x000af7cf = 718799

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 c0 f7 0a e0 08 02:39:54.301 READ DMA
25 00 07 e8 57 38 e0 08 02:39:54.301 READ DMA EXT
25 00 40 00 57 38 e0 08 02:39:54.301 READ DMA EXT
c8 00 80 60 00 00 e0 08 02:39:54.300 READ DMA
c8 00 40 20 00 00 e0 08 02:39:54.300 READ DMA

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 26 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[freefour]

Hitachi dev/sdb:

Κώδικας: Επιλογή όλων

smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.5.0-23-generic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.D
Device Model: Hitachi HDS721050DLE630
Serial Number: MSK421Y21P1KZF
LU WWN Device Id: 5 000cca 37fd7a93a
Firmware Version: MS1OA650
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Feb 2 18:50:51 2013 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5451) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 91) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 131 131 024 Pre-fail Always - 181 (Average 168)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 19
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 28
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 14
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 19
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 19
194 Temperature_Celsius 0x0002 176 176 000 Old_age Always - 34 (Min/Max 13/34)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 5 hours (0 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 17 29 00 00 Error: UNC 1 sectors at LBA = 0x00002917 = 10519

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 10 29 00 e0 08 00:00:52.704 READ DMA
c8 00 08 78 08 00 e0 08 00:00:52.703 READ DMA
c8 00 08 70 08 00 e0 08 00:00:52.703 READ DMA
c8 00 08 68 08 00 e0 08 00:00:52.703 READ DMA
c8 00 08 60 08 00 e0 08 00:00:52.703 READ DMA

Error 1 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 31 0f 50 f8 03 Error: UNC 49 sectors at LBA = 0x03f8500f = 66605071

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 00 50 f8 e0 08 01:31:40.469 READ DMA EXT
25 00 40 80 27 23 e0 08 01:31:40.467 READ DMA EXT
25 00 38 c0 27 23 e0 08 01:31:40.466 READ DMA EXT
25 00 40 80 87 13 e0 08 01:31:40.466 READ DMA EXT
25 00 38 c0 87 13 e0 08 01:31:40.466 READ DMA EXT

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 28 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Ευχαριστω πολυ για το ενδιαφερον!

[Learner]

Εβαλα τους καινουργιους δισκους, μπορουμε να ριξουμε μια ματια και εδω αν ειναι ενταξη;

Οι δίσκοι , σε ότι αφορά το smart , φαίνονται εντάξει , δεν έχουν κάποιο πρόβλημα HardWare..

Ζητησε και 60 € για 4 διανομες που εβαλε, με δικα μου dvd. (εδωσα οσα ειχα, 40.)

GOD GOOD LORD !!!

Off topic:
Τι να σου κάνω που είναι Desktop , αν ήταν Laptop θα κανονίζαμε μια συνάντηση (στο γνωστό μέρος που γίνονται τα release party) να στις περάσω και να στις ρυθμίσω (Ubuntu-based διανομές μόνο).