OPanos έγραψε:Να υποθέσω πως αυτός είναι ακόμα χειρότερος?
Ναι, είναι χειρότερος
Συντονιστής: adem1
OPanos έγραψε:Να υποθέσω πως αυτός είναι ακόμα χειρότερος?
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 175 173 021 Pre-fail Always - 2233
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3580
5 Reallocated_Sector_Ct 0x0033 189 189 140 Pre-fail Always - 83
7 Seek_Error_Rate 0x000e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 11748
10 Spin_Retry_Count 0x0012 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1780
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 237
193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 3580
194 Temperature_Celsius 0x0022 104 090 000 Old_age Always - 39
196 Reallocated_Event_Count 0x0032 195 195 000 Old_age Always - 5
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 493
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 7600 hours (316 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 57 f0 73 e0 Error: UNC at LBA = 0x0073f057 = 7598167
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 57 f0 73 03 00 00:12:44.353 READ DMA EXT
25 00 00 57 ef 73 03 00 00:12:44.351 READ DMA EXT
25 00 00 57 ee 73 03 00 00:12:44.350 READ DMA EXT
25 00 00 57 ed 73 03 00 00:12:44.349 READ DMA EXT
25 00 00 57 ec 73 03 00 00:12:44.348 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 11745 -
# 2 Short offline Completed without error 00% 11725 -
# 3 Short offline Completed without error 00% 5402 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 189 189 140 Pre-fail Always - 83
196 Reallocated_Event_Count 0x0032 195 195 000 Old_age Always - 5
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-23-generic-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M7
Device Model: SAMSUNG HM500JI
Serial Number: S1YMJA0Z102362
LU WWN Device Id: 5 0024e9 201af6a95
Firmware Version: 2AC101C4
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Mon Jun 3 18:24:13 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 8220) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 137) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 12527
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 090 087 025 Pre-fail Always - 3070
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3381
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1607
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 425
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2652
13 Read_Soft_Error_Rate 0x003a 100 100 000 Old_age Always - 0
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 1437
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 25861
194 Temperature_Celsius 0x0002 064 058 000 Old_age Always - 33 (Min/Max 14/43)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 6375
240 Head_Flying_Hours 0x0032 100 100 000 Old_age Always - 1595
241 Total_LBAs_Written 0x0032 097 094 000 Old_age Always - 5298690
242 Total_LBAs_Read 0x0032 095 094 000 Old_age Always - 6880409
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
ubuntu@ubuntu:~$
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 099 099 016 Pre-fail Always - 131073
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 108 108 024 Pre-fail Always - 345 (Average 344)
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 7555
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 12472
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 7443
192 Power-Off_Retract_Count 0x0032 094 094 000 Old_age Always - 7559
193 Load_Cycle_Count 0x0012 094 094 000 Old_age Always - 7559
194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 38 (Min/Max 9/46)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
yiannis66 έγραψε:Αυτός ο δίσκος μου δέχει 2 bad sectors , σώζεται;
per έγραψε:Ποια είναι η κατάσταση του δίσκου; Στο Raw_Read_Error_Rate το RAW_VALUE είναι 131073 και όχι μηδέν. Τι σημαίνει αυτό;
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.5.0-39-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10
Device Model: ST3160215A
Serial Number: 9RA4NTJP
Firmware Version: 3.AAD
User Capacity: 160.041.885.696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Aug 21 21:36:18 2013 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 244010539
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 4013
5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 125
7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 583192314
9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 13052
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3895
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1725
189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 2714
190 Airflow_Temperature_Cel 0x0022 054 047 045 Old_age Always - 46 (Min/Max 34/46)
194 Temperature_Celsius 0x0022 046 053 000 Old_age Always - 46 (0 17 0 0)
195 Hardware_ECC_Recovered 0x001a 080 064 000 Old_age Always - 105987753
197 Current_Pending_Sector 0x0012 001 001 000 Old_age Always - 4294967292
198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 4294967292
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 2079 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2079 occurred at disk power-on lifetime: 12450 hours (518 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 3f 72 8b e0 Error: UNC at LBA = 0x008b723f = 9138751
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 00 72 8b e0 00 00:02:23.146 READ DMA EXT
25 00 08 f0 71 8b e0 00 00:02:23.143 READ DMA EXT
25 00 40 d8 19 89 e0 00 00:02:23.123 READ DMA EXT
35 00 08 c0 11 f0 e0 00 00:02:20.072 WRITE DMA EXT
25 00 08 38 ff 65 e0 00 00:02:20.057 READ DMA EXT
Error 2078 occurred at disk power-on lifetime: 12450 hours (518 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 3f 72 8b e0 Error: UNC at LBA = 0x008b723f = 9138751
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 48 f8 71 8b e0 00 00:02:16.926 READ DMA EXT
25 00 08 e8 71 8b e0 00 00:02:16.920 READ DMA EXT
25 00 40 08 19 89 e0 00 00:02:16.908 READ DMA EXT
25 00 40 50 5a 44 e0 00 00:02:20.072 READ DMA EXT
35 00 08 48 d4 21 e0 00 00:02:20.057 WRITE DMA EXT
Error 2077 occurred at disk power-on lifetime: 12450 hours (518 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 3f 72 8b e0 Error: UNC at LBA = 0x008b723f = 9138751
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 50 f0 71 8b e0 00 00:02:16.926 READ DMA EXT
25 00 08 e0 71 8b e0 00 00:02:16.920 READ DMA EXT
25 00 40 f0 1a 89 e0 00 00:02:16.908 READ DMA EXT
35 00 08 b8 50 ee e0 00 00:02:16.908 WRITE DMA EXT
35 00 00 00 8d 20 e0 00 00:02:16.902 WRITE DMA EXT
Error 2076 occurred at disk power-on lifetime: 12450 hours (518 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 3f 72 8b e0 Error: UNC at LBA = 0x008b723f = 9138751
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 58 e8 71 8b e0 00 00:02:13.674 READ DMA EXT
25 00 08 d8 71 8b e0 00 00:02:13.674 READ DMA EXT
25 00 40 c0 1e 89 e0 00 00:02:13.674 READ DMA EXT
35 00 08 c8 50 ee e0 00 00:02:13.663 WRITE DMA EXT
35 00 08 20 95 e9 e0 00 00:02:13.663 WRITE DMA EXT
Error 2075 occurred at disk power-on lifetime: 12450 hours (518 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 3f 72 8b e0 Error: UNC at LBA = 0x008b723f = 9138751
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 60 e0 71 8b e0 00 00:02:09.958 READ DMA EXT
25 00 08 d0 71 8b e0 00 00:02:09.943 READ DMA EXT
25 00 40 60 26 89 e0 00 00:02:09.926 READ DMA EXT
35 00 08 b8 11 f0 e0 00 00:02:09.926 WRITE DMA EXT
35 00 08 f8 91 e9 e0 00 00:02:09.926 WRITE DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 13052 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
joe003 έγραψε:Πως είναι γιατρέ?
5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 125
7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 583192314
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1725
197 Current_Pending_Sector 0x0012 001 001 000 Old_age Always - 4294967292
198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 4294967292