Έλεγχος σκληρού δίσκου Hardware

[lepidas]

Φτιάχνω ένα νέο backup plan,
εξετάζοντας με smartctl ένα εξ.δίσκο που είναι συνδεδεμένος σε ένα mate 16.04 μέσω usb ωστε να δω αν θα κραταω εκει το backup
μου έβγαλε το εξής μήνυμα

Κώδικας: Επιλογή όλων

sudo smartctl -a /dev/sda
smartctl 6.5 2016-05-07 r4318 [armv7l-linux-3.10.104-128] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sda: Unknown USB bridge [0x0bc2:0xab34 (0x100)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary


αν βάλω device /dev/sda1 λέει...SMART support is: Disabled

Κώδικας: Επιλογή όλων

sudo smartctl -a /dev/sda1
smartctl 6.5 2016-05-07 r4318 [armv7l-linux-3.10.104-128] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor: Seagate
Product: Backup+ Desk
Revision: 040B
Compliance: SPC-4
User Capacity: 3,000,592,981,504 bytes [3.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
Logical Unit id: 0x5000000000000001
Serial number: NA7DW515
Device type: disk
Local Time is: Thu Mar 23 08:53:38 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
Temperature Warning: Disabled or Not Supported

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C

Error Counter logging not supported

Device does not support Self Test logging


Όμως μέσω disks μπορώ να δω το smartctl

[baldrick]

Φτιάχνω ένα νέο backup plan,
εξετάζοντας με smartctl ένα εξ.δίσκο που είναι συνδεδεμένος σε ένα mate 16.04 μέσω usb ωστε να δω αν θα κραταω εκει το backup
μου έβγαλε το εξής μήνυμα [...]

Θα δοκίμαζα κάτι τέτοιο:

Κώδικας: Επιλογή όλων

smartctl -d sat -a /dev/sda

[freefour]

Γεια σας παιδια. Αυτος ο SSD ειναι οκ;
Tον πηρα πριν 1,5 μηνα και βλεπω κατι ανεβασμενα νουμερακια στα αποτελεσματα κατω.
Ευχαριστω.

Κώδικας: Επιλογή όλων

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 569
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 208
177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 3
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 075 067 000 Old_age Always - 25
195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0
199 CRC_Error_Count 0x003e 099 099 000 Old_age Always - 24
235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 57
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 1947664607

SMART Error Log Version: 1
No Errors Logged

[the_eye]

Κώδικας: Επιλογή όλων

199 CRC_Error_Count 0x003e 099 099 000 Old_age Always - 24

Αυτό δεν είναι καλό. Αρκεί να μην αυξάνει.

[the_eye]

Ευχαριστω the_eye.
Υπαρχει περιπτωση αντικαταστασης; Nα περιμενω να δω αν αυξηθει η τιμη και μετα να τον επιστρεψω;
Σε περιπτωση επιστροφης τον στελνουμε πισω με το λειτουργικο (Windows 10) η τον κανουμε φορματ σε NTFS;
Ο δισκος ειναι ο ''Samsung 850 Evo 250GB'' και τον αγορασα στις 31 Οκτομβριου 2017.

Πριν του βαλω το λειτουργικο το μονο που εκανα ειναι να αλλαξω τα παρακατω στο Bios, εκανα δηλαδη δυο ρυθμισεις απο IDE σε AHCI και απο Default σε AHCI.
Μηπως η δευτερη ρυθμιση δεν χρειαζεται και δεν δουλευει σωστα ο δισκος;







http://imagebin.ubuntu-gr.org/files2017/1513416285.jpg

http://imagebin.ubuntu-gr.org/files2017/1513416352.jpg

http://imagebin.ubuntu-gr.org/files2017/1513416467.jpg

[the_eye]

Οι εικόνες σου δεν φαίνονται να τις ανεβάζεις εδώ.
http://imagebin.ubuntu-gr.org/

Το CRC_Error_Count μπορεί να μην είναι σφάλμα στον δίσκο αλλά στο καλώδιο σύνδεσης. Τρέξε τα διαγνωστικά που αναφέρω στο αρχικό θέμα, στο τέλος.

[freefour]

Το CRC_Error_Count μπορεί να μην είναι σφάλμα στον δίσκο αλλά στο καλώδιο σύνδεσης.

Ναι, νομιζω τα καλωδια συνδεσεις που εχω δεν ειναι και πολυ οκ.

Τρέξε τα διαγνωστικά που αναφέρω στο αρχικό θέμα, στο τέλος.

Αυτο το εργαλειο που διχνεις εδω, τo ''GSmartControl'' ειναι;



Αν ειναι αυτο, εκανα ενα Short Self-test.

Κώδικας: Επιλογή όλων

=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 850 EVO 250GB
Serial Number: S3R0NF0J830361K
LU WWN Device Id: 5 002538 d4224fe41
Firmware Version: EMT03B6Q
User Capacity: 250.059.350.016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Dec 16 11:19:15 2017 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 133) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 099 099 000 - 573
12 Power_Cycle_Count -O--CK 099 099 000 - 209
177 Wear_Leveling_Count PO--C- 099 099 000 - 3
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 070 066 000 - 30
195 ECC_Error_Rate -O-RC- 200 200 000 - 0
199 CRC_Error_Count -OSRCK 099 099 000 - 24
235 POR_Recovery_Count -O--C- 099 099 000 - 57
241 Total_LBAs_Written -O--CK 099 099 000 - 1950203228
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning

General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 SL VS 16 Device vendor specific log
0xa5 SL VS 16 Device vendor specific log
0xce SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 573 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 23 Celsius
Power Cycle Min/Max Temperature: 20/25 Celsius
Lifetime Min/Max Temperature: 17/40 Celsius
Under/Over Temperature Limit Count: 0/0

SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (29)

Index Estimated Time Temperature Celsius
30 2017-12-15 14:00 24 *****
31 2017-12-15 14:10 ? -
32 2017-12-15 14:20 18 -
33 2017-12-15 14:30 20 *
34 2017-12-15 14:40 21 **
... ..( 3 skipped). .. **
38 2017-12-15 15:20 21 **
39 2017-12-15 15:30 22 ***
40 2017-12-15 15:40 22 ***
41 2017-12-15 15:50 22 ***
42 2017-12-15 16:00 23 ****
... ..( 9 skipped). .. ****
52 2017-12-15 17:40 23 ****
53 2017-12-15 17:50 27 ********
54 2017-12-15 18:00 24 *****
55 2017-12-15 18:10 26 *******
56 2017-12-15 18:20 26 *******
57 2017-12-15 18:30 28 *********
58 2017-12-15 18:40 24 *****
59 2017-12-15 18:50 23 ****
60 2017-12-15 19:00 23 ****
61 2017-12-15 19:10 23 ****
62 2017-12-15 19:20 22 ***
... ..( 14 skipped). .. ***
77 2017-12-15 21:50 22 ***
78 2017-12-15 22:00 23 ****
79 2017-12-15 22:10 23 ****
80 2017-12-15 22:20 23 ****
81 2017-12-15 22:30 24 *****
82 2017-12-15 22:40 24 *****
83 2017-12-15 22:50 25 ******
... ..( 3 skipped). .. ******
87 2017-12-15 23:30 25 ******
88 2017-12-15 23:40 24 *****
89 2017-12-15 23:50 25 ******
90 2017-12-16 00:00 25 ******
91 2017-12-16 00:10 26 *******
... ..( 7 skipped). .. *******
99 2017-12-16 01:30 26 *******
100 2017-12-16 01:40 25 ******
101 2017-12-16 01:50 26 *******
102 2017-12-16 02:00 26 *******
103 2017-12-16 02:10 26 *******
104 2017-12-16 02:20 25 ******
105 2017-12-16 02:30 26 *******
... ..( 2 skipped). .. *******
108 2017-12-16 03:00 26 *******
109 2017-12-16 03:10 25 ******
... ..( 5 skipped). .. ******
115 2017-12-16 04:10 25 ******
116 2017-12-16 04:20 24 *****
117 2017-12-16 04:30 25 ******
118 2017-12-16 04:40 24 *****
119 2017-12-16 04:50 ? -
120 2017-12-16 05:00 20 *
121 2017-12-16 05:10 21 **
122 2017-12-16 05:20 21 **
123 2017-12-16 05:30 27 ********
124 2017-12-16 05:40 25 ******
125 2017-12-16 05:50 ? -
... ..( 2 skipped). .. -
0 2017-12-16 06:20 ? -
1 2017-12-16 06:30 32 *************
2 2017-12-16 06:40 25 ******
3 2017-12-16 06:50 ? -
4 2017-12-16 07:00 ? -
5 2017-12-16 07:10 26 *******
6 2017-12-16 07:20 25 ******
7 2017-12-16 07:30 25 ******
8 2017-12-16 07:40 27 ********
9 2017-12-16 07:50 25 ******
10 2017-12-16 08:00 25 ******
11 2017-12-16 08:10 25 ******
12 2017-12-16 08:20 ? -
13 2017-12-16 08:30 20 *
14 2017-12-16 08:40 20 *
15 2017-12-16 08:50 21 **
... ..( 2 skipped). .. **
18 2017-12-16 09:20 21 **
19 2017-12-16 09:30 22 ***
20 2017-12-16 09:40 22 ***
21 2017-12-16 09:50 22 ***
22 2017-12-16 10:00 23 ****
23 2017-12-16 10:10 24 *****
24 2017-12-16 10:20 23 ****
... ..( 4 skipped). .. ****
29 2017-12-16 11:10 23 ****

SCT Error Recovery Control:
Read: Disabled
Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 19 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

[the_eye]

Ok είσαι, αν θες άλλαξε καλώδιο.

[freefour]

Οκ ευχαριστω, θα κοιταξω να αλλαξω και τα 3 καλωδια που κουμπωνουν τους δισκους.

[messinisk35]

καλησπέρα , εγω εμαφνησα τα παρακατω .
1 Raw_Read_Error_Rate 0x000f 088 001 051 Pre-fail Always In_the_past 439
5 Reallocated_Sector_Ct 0x0033 018 018 010 Pre-fail Always - 772

Αρα ποσο διαρκια ζωης εχει ο σκλυρος ;