Οδηγός Εγκατάστασης TP-LINK WN322G Wireless Usb Adapter!

[logari81]

Το 322G παίζει άψογα σε 9.04 και 9.10...τι κάθεσαι και ψάχνεις drivers...βάλε καινούργια έκδοση ubuntu και όλα ΟΚ!!!

Διαβασε την παρατηρηση μου στην αρχη του 1ου ποστ.

0ace:1215

Κανονικά παιζει κατευθειαν με τον οδηγό του πυρηνα. Δοκιμασε κανα Ubuntu 9.10 απο LiveCD για να το επιβεβαιώσεις. Έχω την εντύπωση οτι για το συγκεκριμενο id ο κατασκευαστης εβγαλε μια παρτιδα με λιγο αλλαγμενο chip χωρις να αλλαξει το id (γρρρρρρρ) οπότε υπαρχει μια μικρή περίπτωση να μην δουλευει αλλα το νορμαλ ειναι να δουλεύει. Δωσε μας απλώς το αποτελεσμα του

Κώδικας: Επιλογή όλων

dmesg
lsmod


απο το LiveCD του 9.10, με το στικ συνδεμενο και θα σου πουμε.

[mvagelis]

Γεια σας.
Προσπαθώ να εγκαταστήσω την TP-LINK WN-322G v3 μα δεν τα καταφέρνω... μήπως υπάρχει κάποια βοήθεια ??
Δοκίμασα και την διαδικασία που αναφέρεται στις πρώτες σελίδες μα τίποτα. Έχω ubuntu 9.10. Το δοκίμασα και σε 9.04 αλλά τίποτα.

Κώδικας: Επιλογή όλων

root@King16:/home/user# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 0cf3:1006 Atheros Communications, Inc.
Bus 001 Device 004: ID 0951:1624 Kingston Technology
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 045e:0083 Microsoft Corp. Basic Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Ευχαριστώ

[Lionux]

Γεια σας.
Προσπαθώ να εγκαταστήσω την TP-LINK WN-322G v3 μα δεν τα καταφέρνω... μήπως υπάρχει κάποια βοήθεια ??
Δοκίμασα και την διαδικασία που αναφέρεται στις πρώτες σελίδες μα τίποτα. Έχω ubuntu 9.10. Το δοκίμασα και σε 9.04 αλλά τίποτα.

Κ εγω αυτην εχω φιλε μου αλλα οτι κ αν δοκιμασα τιποτα δεν καταφερα δυστυχως ... Απ'οτι με ενημερωσαν τα παιδια εδω στο forum η υποστηριξη της θα ξεκινησει κατα πασα πιθανοτητα απο την εκδοση 10.04 !

[elefher]

καλησπερα παιδια.Εκανα οτι ελεγε ο οδηγος αλλα δεν καταφερα να το εγκαταστησω.Να σας ενημερωσω οτι προσπαθω να το κανω στο debian και οχι στο ubuntu μιας και εχω ενσηρματη συνδεση σε αυτο.Εχω ψαξει και αλλου αλλα δεν εχω βρει καποια λυση γιαυτο ειπα να δοκιμασω και εδω.Εδωσα τις παρακατω εντολες και ποσταρω τα αποτελεσματα μηπος και σαςα βοηθυσουν:

Κώδικας: Επιλογή όλων

lsusb
Bus 005 Device 003: ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
Bus 005 Device 002: ID 0ace:1215 ZyDAS WLA-54L 802.11bg
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub




dmesg
[ 1.219124] Using IPI No-Shortcut mode
[ 1.219533] registered taskstats version 1
[ 1.219714] rtc_cmos 00:02: setting system clock to 2010-04-13 13:33:56 UTC (1271165636)
[ 1.220138] Freeing unused kernel memory: 244k freed
[ 1.245406] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.370300] ACPI: ACPI0007:00 is registered as cooling_device0
[ 2.259609] usbcore: registered new interface driver usbfs
[ 2.259668] usbcore: registered new interface driver hub
[ 2.259757] usbcore: registered new device driver usb
[ 2.276169] USB Universal Host Controller Interface driver v3.0
[ 2.276248] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.276264] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.276269] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.276495] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.276539] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000
[ 2.276680] usb usb1: configuration #1 chosen from 1 choice
[ 2.276735] hub 1-0:1.0: USB hub found
[ 2.276752] hub 1-0:1.0: 2 ports detected
[ 2.380266] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.380272] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.380276] usb usb1: Product: UHCI Host Controller
[ 2.380278] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.380281] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.380359] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 2.380375] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.380379] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.380433] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.380477] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 2.380602] usb usb2: configuration #1 chosen from 1 choice
[ 2.380657] hub 2-0:1.0: USB hub found
[ 2.380675] hub 2-0:1.0: 2 ports detected
[ 2.392548] Uniform Multi-Platform E-IDE driver
[ 2.392557] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.412197] 8139too Fast Ethernet driver 0.9.28
[ 2.413943] sundance.c:v1.2 11-Sep-2006 Written by Donald Becker
[ 2.484233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.484239] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.484242] usb usb2: Product: UHCI Host Controller
[ 2.484245] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.484247] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.484357] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 2.484373] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.484378] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.484434] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.484473] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 2.484603] usb usb3: configuration #1 chosen from 1 choice
[ 2.484661] hub 3-0:1.0: USB hub found
[ 2.484682] hub 3-0:1.0: 2 ports detected
[ 2.536867] Floppy drive(s): fd0 is 1.44M
[ 2.555853] FDC 0 is a post-1991 82077
[ 2.588247] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.588254] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.588258] usb usb3: Product: UHCI Host Controller
[ 2.588260] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.588263] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.588353] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.588369] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 2.588373] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.588428] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.588460] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 2.588598] usb usb4: configuration #1 chosen from 1 choice
[ 2.588651] hub 4-0:1.0: USB hub found
[ 2.588667] hub 4-0:1.0: 2 ports detected
[ 2.692226] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.692233] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.692237] usb usb4: Product: UHCI Host Controller
[ 2.692239] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.692242] usb usb4: SerialNumber: 0000:00:1d.3
[ 2.692402] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
[ 2.692427] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.692432] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.692492] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.696419] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.696427] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 2.696451] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[ 2.724041] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 2.736022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.736164] usb usb5: configuration #1 chosen from 1 choice
[ 2.736221] hub 5-0:1.0: USB hub found
[ 2.736239] hub 5-0:1.0: 8 ports detected
[ 2.792059] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 2.840202] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.840208] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.840211] usb usb5: Product: EHCI Host Controller
[ 2.840213] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 2.840215] usb usb5: SerialNumber: 0000:00:1d.7
[ 2.842907] ICH5: IDE controller (0x8086:0x24db rev 0x02) at PCI slot 0000:00:1f.1
[ 2.842921] PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
[ 2.842929] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 2.842944] ICH5: not 100% native mode: will probe irqs later
[ 2.842959] ide0: BM-DMA at 0xfc00-0xfc07
[ 2.842972] ide1: BM-DMA at 0xfc08-0xfc0f
[ 2.842979] Probing IDE interface ide0...
[ 3.080032] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 3.128008] hda: WDC WD400BB-00DEA0, ATA DISK drive
[ 3.212875] usb 5-4: configuration #1 chosen from 1 choice
[ 3.213367] usb 5-4: New USB device found, idVendor=0ace, idProduct=1215
[ 3.213373] usb 5-4: New USB device strings: Mfr=16, Product=32, SerialNumber=0
[ 3.213376] usb 5-4: Product: USB2.0 WLAN
[ 3.213379] usb 5-4: Manufacturer: ZyDAS
[ 3.572005] hdb: TOSHIBA CD/DVDW SD-R5372, ATAPI CD/DVD-ROM drive
[ 3.632098] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.632932] hda: UDMA/100 mode selected
[ 3.633772] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.634138] hdb: UDMA/33 mode selected
[ 3.634525] Probing IDE interface ide1...
[ 3.920181] hdc: ST38421A, ATA DISK drive
[ 4.200179] hdd: SAMSUNG SP0411N, ATA DISK drive
[ 4.256088] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.256241] hdc: UDMA/33 mode selected
[ 4.256442] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.256512] hdd: UDMA/100 mode selected
[ 4.256599] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.278208] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.278208] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 4.292647] eth0: RealTek RTL8139 at 0xb800, 00:e0:4c:6c:12:1f, IRQ 18
[ 4.292653] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 4.297707] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.298377] eth1: IC Plus Corporation IP100A FAST Ethernet Adapter at 0001bc00, 00:1b:fc:0a:e7:5a, IRQ 16.
[ 4.298886] eth1: MII PHY found at address 0, status 0x7849 advertising 01e1.
[ 4.607441] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.613960] No dock devices found.
[ 4.625130] SCSI subsystem initialized
[ 4.638591] libata version 3.00 loaded.
[ 4.711810] hda: max request size: 128KiB
[ 4.716673] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63
[ 4.716681] hda: cache flushes not supported
[ 4.716760] hda: hda1 hda2 hda3
[ 4.763460] hdc: max request size: 128KiB
[ 4.763662] hdc: 16498944 sectors (8447 MB) w/256KiB Cache, CHS=16368/16/63
[ 4.763669] hdc: cache flushes not supported
[ 4.763729] hdc: hdc1
[ 4.764748] hdd: max request size: 512KiB
[ 4.764875] hdd: Host Protected Area detected.
[ 4.764877] current capacity is 66055248 sectors (33820 MB)
[ 4.764878] native capacity is 78242976 sectors (40060 MB)
[ 4.764971] hdd: Host Protected Area disabled.
[ 4.764976] hdd: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63
[ 4.765187] hdd: cache flushes supported
[ 4.765245] hdd:<6>hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 4.765466] Uniform CD-ROM driver Revision: 3.20
[ 4.773242] hdd1
[ 5.395532] PM: Starting manual resume from disk
[ 5.452003] kjournald starting. Commit interval 5 seconds
[ 5.452003] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.385095] udevd version 125 started
[ 9.068260] Linux agpgart interface v0.103
[ 9.074297] agpgart: Detected an Intel 865 Chipset.
[ 9.078385] agpgart: AGP aperture is 64M @ 0xf8000000
[ 9.109315] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.117583] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.280289] input: Power Button (FF) as /class/input/input1
[ 9.308536] ACPI: Power Button (FF) [PWRF]
[ 9.308673] input: Power Button (CM) as /class/input/input2
[ 9.336115] ACPI: Power Button (CM) [PWRB]
[ 10.246320] intel_rng: FWH not detected
[ 10.556906] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 10.628760] input: PC Speaker as /class/input/input3
[ 10.632064] usb 5-4: reset high speed USB device using ehci_hcd and address 2
[ 10.765798] phy0: Selected rate control algorithm 'pid'
[ 11.006277] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 11.006317] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 11.156818] zd1211rw 5-4:1.0: phy0
[ 11.156857] usbcore: registered new interface driver zd1211rw
[ 11.328051] intel8x0_measure_ac97_clock: measured 54586 usecs
[ 11.328057] intel8x0: clocking to 48000
[ 11.540017] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[ 11.571929] parport_pc 00:08: reported by Plug and Play ACPI
[ 11.571979] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 12.421127] Adding 2474000k swap on /dev/hda3. Priority:-1 extents:1 across:2474000k
[ 12.838575] EXT3 FS on hda1, internal journal
[ 13.188867] loop: module loaded
[ 15.230626] kjournald starting. Commit interval 5 seconds
[ 15.232150] EXT3 FS on hda2, internal journal
[ 15.232160] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.272791] kjournald starting. Commit interval 5 seconds
[ 15.276150] EXT3 FS on hdd1, internal journal
[ 15.276160] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.316773] kjournald starting. Commit interval 5 seconds
[ 15.320301] EXT3 FS on hdc1, internal journal
[ 15.320310] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.312268] firmware: requesting zd1211/zd1211b_ub
[ 16.372992] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 16.373072] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 16.373419] firmware: requesting zd1211/zd1211b_ub
[ 16.392786] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 16.392867] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 83.071379] NET: Registered protocol family 10
[ 83.072276] lo: Disabled Privacy Extensions
[ 83.292328] lp0: using parport0 (interrupt-driven).
[ 83.316292] ppdev: user-space parallel port driver
[ 87.602282] firmware: requesting zd1211/zd1211b_ub
[ 87.613775] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 87.613857] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 89.867598] eth0: link down
[ 89.868485] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1839.828067] usb 5-2: new high speed USB device using ehci_hcd and address 3
[ 1840.271249] usb 5-2: configuration #1 chosen from 1 choice
[ 1840.272313] usb 5-2: New USB device found, idVendor=058f, idProduct=6387
[ 1840.272319] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1840.272322] usb 5-2: Product: Mass Storage Device
[ 1840.272324] usb 5-2: Manufacturer: JetFlash
[ 1840.272326] usb 5-2: SerialNumber: FVJQ72C3
[ 1840.493631] Initializing USB Mass Storage driver...
[ 1840.496417] scsi0 : SCSI emulation for USB Mass Storage devices
[ 1840.496659] usbcore: registered new interface driver usb-storage
[ 1840.496667] USB Mass Storage support registered.
[ 1840.496702] usb-storage: device found at 3
[ 1840.496706] usb-storage: waiting for device to settle before scanning
[ 1845.496325] usb-storage: device scan complete
[ 1845.656787] scsi 0:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2
[ 1845.758306] Driver 'sd' needs updating - please use bus_type methods
[ 1845.762376] sd 0:0:0:0: [sda] 4005886 512-byte hardware sectors (2051 MB)
[ 1845.763135] sd 0:0:0:0: [sda] Write Protect is off
[ 1845.763141] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 1845.763145] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 1845.766122] sd 0:0:0:0: [sda] 4005886 512-byte hardware sectors (2051 MB)
[ 1845.766876] sd 0:0:0:0: [sda] Write Protect is off
[ 1845.766883] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 1845.766886] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 1845.766893] sda: sda1
[ 1845.767836] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 1846.866155] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 2108.000011] UDF-fs: No VRS found
[ 2108.000011] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2108.255701] ISO 9660 Extensions: RRIP_1991A
[ 2128.754512] UDF-fs: No VRS found
[ 2128.758822] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2128.975524] ISO 9660 Extensions: RRIP_1991A
[ 2194.055333] UDF-fs: No VRS found
[ 2194.057430] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2194.296930] ISO 9660 Extensions: RRIP_1991A
[ 2336.541737] UDF-fs: No VRS found
[ 2336.562734] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2336.584778] ISOFS: changing to secondary root
[ 2477.826251] firmware: requesting zd1211/zd1211b_ub
[ 2477.844099] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2477.844108] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2479.934853] eth0: link down
[ 2479.935178] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2539.878054] firmware: requesting zd1211/zd1211b_ub
[ 2539.892412] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2539.892422] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2542.010022] eth0: link down
[ 2542.010382] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2559.795387] firmware: requesting zd1211/zd1211b_ub
[ 2559.816314] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2559.816324] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2562.003095] eth0: link down
[ 2562.003419] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2562.556370] firmware: requesting zd1211/zd1211b_ub
[ 2562.570551] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2562.570561] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2579.620339] firmware: requesting zd1211/zd1211b_ub
[ 2579.634459] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2579.634469] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2583.216345] firmware: requesting zd1211/zd1211b_ub
[ 2583.230070] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2583.230079] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2596.672349] firmware: requesting zd1211/zd1211b_ub
[ 2596.685973] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2596.685984] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2600.832465] firmware: requesting zd1211/zd1211b_ub
[ 2600.854958] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2600.854969] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2602.177259] firmware: requesting zd1211/zd1211b_ub
[ 2602.189077] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2602.189087] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2656.827873] firmware: requesting zd1211/zd1211b_ub
[ 2656.842532] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2656.842541] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2657.951689] firmware: requesting zd1211/zd1211b_ub
[ 2657.963205] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2657.963215] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2732.495608] firmware: requesting zd1211/zd1211b_ub
[ 2732.509342] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2732.509353] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2733.616465] firmware: requesting zd1211/zd1211b_ub
[ 2733.629827] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2733.629837] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2736.258723] firmware: requesting zd1211/zd1211b_ub
[ 2736.272212] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2736.272223] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2736.272337] firmware: requesting zd1211/zd1211b_ub
[ 2736.292276] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2736.292286] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2762.758134] firmware: requesting zd1211/zd1211b_ub
[ 2762.771819] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2762.771829] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2764.836981] eth0: link down
[ 2764.837304] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2847.030678] firmware: requesting zd1211/zd1211b_ub
[ 2847.042724] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2847.042734] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2847.042853] firmware: requesting zd1211/zd1211b_ub
[ 2847.066725] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2847.066735] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2849.184575] firmware: requesting zd1211/zd1211b_ub
[ 2849.198506] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2849.198516] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2851.444403] eth0: link down
[ 2851.445026] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2879.825744] firmware: requesting zd1211/zd1211b_ub
[ 2879.857532] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2879.857542] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2879.857678] firmware: requesting zd1211/zd1211b_ub
[ 2879.891287] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2879.891297] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2882.003328] firmware: requesting zd1211/zd1211b_ub
[ 2882.018756] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2882.018766] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2884.141992] eth0: link down
[ 2884.142245] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2917.496269] firmware: requesting zd1211/zd1211b_ub
[ 2917.509917] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2917.509926] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2917.655169] firmware: requesting zd1211/zd1211b_ub
[ 2917.669215] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2917.669225] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2917.669346] firmware: requesting zd1211/zd1211b_ub
[ 2917.690444] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2917.690454] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2943.917070] firmware: requesting zd1211/zd1211b_ub
[ 2943.930873] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2943.930882] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2946.002565] eth0: link down
[ 2946.002933] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3210.030860] firmware: requesting zd1211/zd1211b_ub
[ 3210.044846] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3210.044856] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3210.044979] firmware: requesting zd1211/zd1211b_ub
[ 3210.065327] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3210.065336] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3235.248601] firmware: requesting zd1211/zd1211b_ub
[ 3235.262272] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3235.262282] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3237.337350] eth0: link down
[ 3237.337672] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3281.364342] firmware: requesting zd1211/zd1211b_ub
[ 3281.378022] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3281.378032] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3283.720702] eth0: link down
[ 3283.721059] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3325.540745] firmware: requesting zd1211/zd1211b_ub
[ 3325.551847] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3325.551857] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3325.551976] firmware: requesting zd1211/zd1211b_ub
[ 3325.571699] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3325.571709] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3325.960360] firmware: requesting zd1211/zd1211b_ub
[ 3325.971561] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3325.971571] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3325.972474] firmware: requesting zd1211/zd1211b_ub
[ 3326.003558] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3326.003567] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3328.118251] firmware: requesting zd1211/zd1211b_ub
[ 3328.133770] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3328.133779] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3330.327149] eth0: link down
[ 3330.327899] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3384.475893] firmware: requesting zd1211/zd1211b_ub
[ 3384.489471] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3384.489480] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3384.491669] firmware: requesting zd1211/zd1211b_ub
[ 3384.518236] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3384.518245] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3386.611251] firmware: requesting zd1211/zd1211b_ub
[ 3386.624716] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3386.624727] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3388.740963] eth0: link down
[ 3388.741301] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3414.456161] firmware: requesting zd1211/zd1211b_ub
[ 3414.467364] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3414.467374] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3414.467502] firmware: requesting zd1211/zd1211b_ub
[ 3414.490330] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3414.490340] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3416.609657] firmware: requesting zd1211/zd1211b_ub
[ 3416.625729] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3416.625738] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3418.839455] eth0: link down
[ 3418.840083] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3448.652759] firmware: requesting zd1211/zd1211b_ub
[ 3448.663952] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3448.663962] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3448.664516] firmware: requesting zd1211/zd1211b_ub
[ 3448.684084] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3448.684093] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3451.430507] firmware: requesting zd1211/zd1211b_ub
[ 3451.444066] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3451.444076] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3453.573412] eth0: link down
[ 3453.573662] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3470.670564] firmware: requesting zd1211/zd1211b_ub
[ 3470.682179] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3470.682190] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3470.682686] firmware: requesting zd1211/zd1211b_ub
[ 3470.705483] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3470.705493] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3472.825008] firmware: requesting zd1211/zd1211b_ub
[ 3472.838896] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3472.838905] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3475.052561] eth0: link down
[ 3475.053174] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3505.983818] firmware: requesting zd1211/zd1211b_ub
[ 3505.997608] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3505.997617] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3505.999796] firmware: requesting zd1211/zd1211b_ub
[ 3506.016291] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3506.016300] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3508.112314] firmware: requesting zd1211/zd1211b_ub
[ 3508.126099] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3508.126109] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3510.194332] eth0: link down
[ 3510.194657] ADDRCONF(NETDEV_UP): eth0: link is not ready






lsmod
Module Size Used by
isofs 28196 1
zlib_inflate 14144 1 isofs
udf 67780 0
crc_itu_t 2080 1 udf
nls_utf8 1760 2
nls_cp437 5568 1
vfat 9152 1
fat 40864 1 vfat
nls_base 6820 6 isofs,udf,nls_utf8,nls_cp437,vfat,fat
sd_mod 22200 2
usb_storage 77120 1
ppdev 6468 0
lp 8164 0
ipv6 235396 16
speedstep_lib 4516 0
cpufreq_stats 3776 0
cpufreq_conservative 5960 0
cpufreq_userspace 3172 0
cpufreq_ondemand 6476 0
freq_table 4224 2 cpufreq_stats,cpufreq_ondemand
cpufreq_powersave 1856 0
loop 12748 0
arc4 1824 2
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
ecb 2624 2
crypto_blkcipher 15236 1 ecb
snd_intel8x0 26268 1
snd_ac97_codec 88452 1 snd_intel8x0
ac97_bus 1728 1 snd_ac97_codec
snd_pcm 62660 2 snd_intel8x0,snd_ac97_codec
snd_seq 41456 0
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 1 snd_seq
snd 45636 8 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
psmouse 32336 0
serio_raw 4740 0
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_intel8x0,snd_pcm
pcspkr 2432 0
i2c_i801 7920 0
i2c_core 19828 1 i2c_i801
zd1211rw 39876 0
firmware_class 6816 1 zd1211rw
mac80211 139776 1 zd1211rw
cfg80211 21608 1 mac80211
rng_core 3940 0
button 6096 0
shpchp 25528 0
pci_hotplug 23460 1 shpchp
intel_agp 22524 1
agpgart 28808 1 intel_agp
evdev 8000 3
ext3 105576 4
jbd 39476 1 ext3
mbcache 7108 1 ext3
ide_cd_mod 27684 1
cdrom 30176 1 ide_cd_mod
ide_disk 10496 8
ata_generic 4676 0
libata 140448 1 ata_generic
scsi_mod 129548 3 sd_mod,usb_storage,libata
dock 8304 1 libata
ide_pci_generic 3908 0 [permanent]
8139cp 16800 0
floppy 47844 0
sundance 17312 0
8139too 20384 0
mii 4896 3 8139cp,sundance,8139too
piix 6568 0 [permanent]
ide_core 96168 4 ide_cd_mod,ide_disk,ide_pci_generic,piix
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118192 5 usb_storage,zd1211rw,ehci_hcd,uhci_hcd
thermal 15228 0
processor 32576 1 thermal
fan 4196 0
thermal_sys 10856 3 thermal,processor,fan





iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

eth1 no wireless extensions.

wmaster0 no wireless extensions.

wlan0 IEEE 802.11 ESSID:"connx"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:736E-7070-6B65-7230-3231-3938-39
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

[logari81]

Εκανα οτι ελεγε ο οδηγος αλλα δεν καταφερα να το εγκαταστησω.

κακώς εφαρμοσες τον οδηγο, δεν διαβασες την προϋδοποίηση που έχω προσθέσει στην αρχή του;

Η καρτα σου

Bus 005 Device 002: ID 0ace:1215 ZyDAS WLA-54L 802.11bg

όπως ανέφεραν πολλά ατομα σε αυτο το νήμα δουλευε χωρις να κανεις ΑΠΟΛΥΤΩΣ τιποτα. Μετά απο οσα έκανες φυσικό ειναι να μην δουλευει όμως. Θα σου προτεινα να κανεις μια νεα εγκατασταση ή δοκιμη απο LiveCD και να μας πεις γιατι δεν μπορεις να συνδεθεις (αν δεν μπορεις να συνδεθεις).

[elefher]

Εαν θυμαμε καλα οταν την ειχα βαλει στο ubuntu οντως δουλευαι απο μονη της,εγω ομως θελω να τη βαλω στο debian οπου απο μονη της δεν δουλευει

[logari81]

και στο debian θα πρεπει να δουλευει απο μόνη της και σε καθε Linux. Εν πασει περιπτώση ο παρόν οδηγός μονο ζημια μπορει να σου κανει για την καρτα που έχεις. Σε καθαρο debian (χωρις τις δικές σου παρεμβάσεις) τι πρόβλημα ειχε; Δεν εδειχνε τα δικτυα ή δεν συνδεόταν. Το πρωτο που θα επρεπε να ειχες κανει θα ήταν να μας δωσεις τα αποτελέσματα των εντολών

Κώδικας: Επιλογή όλων

dmesg
iwconfig
sudo iwlist scan

[elefher]

Καθως το εκανα εγκατασταη το Debian μου ζητησε να βαλει τους οδηγους για την ασυρματη συνδεση πατησα να το κανει αλλα δεν μπορουσε ετσι το προσπερασα και συνεχησα κανονικα την εγκατασταση μου.Απο την αρχη δεν εδειχνε κανενα δικτυω.
τα αποτελεσματα απο τις εντολες ειναι:

Κώδικας: Επιλογή όλων

dmesg
[ 2.380281] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.380359] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 2.380375] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.380379] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.380433] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.380477] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 2.380602] usb usb2: configuration #1 chosen from 1 choice
[ 2.380657] hub 2-0:1.0: USB hub found
[ 2.380675] hub 2-0:1.0: 2 ports detected
[ 2.392548] Uniform Multi-Platform E-IDE driver
[ 2.392557] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.412197] 8139too Fast Ethernet driver 0.9.28
[ 2.413943] sundance.c:v1.2 11-Sep-2006 Written by Donald Becker
[ 2.484233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.484239] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.484242] usb usb2: Product: UHCI Host Controller
[ 2.484245] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.484247] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.484357] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 2.484373] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.484378] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.484434] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.484473] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 2.484603] usb usb3: configuration #1 chosen from 1 choice
[ 2.484661] hub 3-0:1.0: USB hub found
[ 2.484682] hub 3-0:1.0: 2 ports detected
[ 2.536867] Floppy drive(s): fd0 is 1.44M
[ 2.555853] FDC 0 is a post-1991 82077
[ 2.588247] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.588254] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.588258] usb usb3: Product: UHCI Host Controller
[ 2.588260] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.588263] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.588353] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.588369] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 2.588373] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.588428] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.588460] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 2.588598] usb usb4: configuration #1 chosen from 1 choice
[ 2.588651] hub 4-0:1.0: USB hub found
[ 2.588667] hub 4-0:1.0: 2 ports detected
[ 2.692226] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.692233] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.692237] usb usb4: Product: UHCI Host Controller
[ 2.692239] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.692242] usb usb4: SerialNumber: 0000:00:1d.3
[ 2.692402] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
[ 2.692427] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.692432] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.692492] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.696419] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.696427] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 2.696451] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[ 2.724041] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 2.736022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.736164] usb usb5: configuration #1 chosen from 1 choice
[ 2.736221] hub 5-0:1.0: USB hub found
[ 2.736239] hub 5-0:1.0: 8 ports detected
[ 2.792059] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 2.840202] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.840208] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.840211] usb usb5: Product: EHCI Host Controller
[ 2.840213] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 2.840215] usb usb5: SerialNumber: 0000:00:1d.7
[ 2.842907] ICH5: IDE controller (0x8086:0x24db rev 0x02) at PCI slot 0000:00:1f.1
[ 2.842921] PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
[ 2.842929] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 2.842944] ICH5: not 100% native mode: will probe irqs later
[ 2.842959] ide0: BM-DMA at 0xfc00-0xfc07
[ 2.842972] ide1: BM-DMA at 0xfc08-0xfc0f
[ 2.842979] Probing IDE interface ide0...
[ 3.080032] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 3.128008] hda: WDC WD400BB-00DEA0, ATA DISK drive
[ 3.212875] usb 5-4: configuration #1 chosen from 1 choice
[ 3.213367] usb 5-4: New USB device found, idVendor=0ace, idProduct=1215
[ 3.213373] usb 5-4: New USB device strings: Mfr=16, Product=32, SerialNumber=0
[ 3.213376] usb 5-4: Product: USB2.0 WLAN
[ 3.213379] usb 5-4: Manufacturer: ZyDAS
[ 3.572005] hdb: TOSHIBA CD/DVDW SD-R5372, ATAPI CD/DVD-ROM drive
[ 3.632098] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.632932] hda: UDMA/100 mode selected
[ 3.633772] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.634138] hdb: UDMA/33 mode selected
[ 3.634525] Probing IDE interface ide1...
[ 3.920181] hdc: ST38421A, ATA DISK drive
[ 4.200179] hdd: SAMSUNG SP0411N, ATA DISK drive
[ 4.256088] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.256241] hdc: UDMA/33 mode selected
[ 4.256442] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.256512] hdd: UDMA/100 mode selected
[ 4.256599] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.278208] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.278208] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 4.292647] eth0: RealTek RTL8139 at 0xb800, 00:e0:4c:6c:12:1f, IRQ 18
[ 4.292653] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 4.297707] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.298377] eth1: IC Plus Corporation IP100A FAST Ethernet Adapter at 0001bc00, 00:1b:fc:0a:e7:5a, IRQ 16.
[ 4.298886] eth1: MII PHY found at address 0, status 0x7849 advertising 01e1.
[ 4.607441] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.613960] No dock devices found.
[ 4.625130] SCSI subsystem initialized
[ 4.638591] libata version 3.00 loaded.
[ 4.711810] hda: max request size: 128KiB
[ 4.716673] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63
[ 4.716681] hda: cache flushes not supported
[ 4.716760] hda: hda1 hda2 hda3
[ 4.763460] hdc: max request size: 128KiB
[ 4.763662] hdc: 16498944 sectors (8447 MB) w/256KiB Cache, CHS=16368/16/63
[ 4.763669] hdc: cache flushes not supported
[ 4.763729] hdc: hdc1
[ 4.764748] hdd: max request size: 512KiB
[ 4.764875] hdd: Host Protected Area detected.
[ 4.764877] current capacity is 66055248 sectors (33820 MB)
[ 4.764878] native capacity is 78242976 sectors (40060 MB)
[ 4.764971] hdd: Host Protected Area disabled.
[ 4.764976] hdd: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63
[ 4.765187] hdd: cache flushes supported
[ 4.765245] hdd:<6>hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 4.765466] Uniform CD-ROM driver Revision: 3.20
[ 4.773242] hdd1
[ 5.395532] PM: Starting manual resume from disk
[ 5.452003] kjournald starting. Commit interval 5 seconds
[ 5.452003] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.385095] udevd version 125 started
[ 9.068260] Linux agpgart interface v0.103
[ 9.074297] agpgart: Detected an Intel 865 Chipset.
[ 9.078385] agpgart: AGP aperture is 64M @ 0xf8000000
[ 9.109315] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.117583] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.280289] input: Power Button (FF) as /class/input/input1
[ 9.308536] ACPI: Power Button (FF) [PWRF]
[ 9.308673] input: Power Button (CM) as /class/input/input2
[ 9.336115] ACPI: Power Button (CM) [PWRB]
[ 10.246320] intel_rng: FWH not detected
[ 10.556906] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 10.628760] input: PC Speaker as /class/input/input3
[ 10.632064] usb 5-4: reset high speed USB device using ehci_hcd and address 2
[ 10.765798] phy0: Selected rate control algorithm 'pid'
[ 11.006277] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 11.006317] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 11.156818] zd1211rw 5-4:1.0: phy0
[ 11.156857] usbcore: registered new interface driver zd1211rw
[ 11.328051] intel8x0_measure_ac97_clock: measured 54586 usecs
[ 11.328057] intel8x0: clocking to 48000
[ 11.540017] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[ 11.571929] parport_pc 00:08: reported by Plug and Play ACPI
[ 11.571979] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 12.421127] Adding 2474000k swap on /dev/hda3. Priority:-1 extents:1 across:2474000k
[ 12.838575] EXT3 FS on hda1, internal journal
[ 13.188867] loop: module loaded
[ 15.230626] kjournald starting. Commit interval 5 seconds
[ 15.232150] EXT3 FS on hda2, internal journal
[ 15.232160] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.272791] kjournald starting. Commit interval 5 seconds
[ 15.276150] EXT3 FS on hdd1, internal journal
[ 15.276160] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.316773] kjournald starting. Commit interval 5 seconds
[ 15.320301] EXT3 FS on hdc1, internal journal
[ 15.320310] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.312268] firmware: requesting zd1211/zd1211b_ub
[ 16.372992] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 16.373072] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 16.373419] firmware: requesting zd1211/zd1211b_ub
[ 16.392786] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 16.392867] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 83.071379] NET: Registered protocol family 10
[ 83.072276] lo: Disabled Privacy Extensions
[ 83.292328] lp0: using parport0 (interrupt-driven).
[ 83.316292] ppdev: user-space parallel port driver
[ 87.602282] firmware: requesting zd1211/zd1211b_ub
[ 87.613775] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 87.613857] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 89.867598] eth0: link down
[ 89.868485] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1839.828067] usb 5-2: new high speed USB device using ehci_hcd and address 3
[ 1840.271249] usb 5-2: configuration #1 chosen from 1 choice
[ 1840.272313] usb 5-2: New USB device found, idVendor=058f, idProduct=6387
[ 1840.272319] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1840.272322] usb 5-2: Product: Mass Storage Device
[ 1840.272324] usb 5-2: Manufacturer: JetFlash
[ 1840.272326] usb 5-2: SerialNumber: FVJQ72C3
[ 1840.493631] Initializing USB Mass Storage driver...
[ 1840.496417] scsi0 : SCSI emulation for USB Mass Storage devices
[ 1840.496659] usbcore: registered new interface driver usb-storage
[ 1840.496667] USB Mass Storage support registered.
[ 1840.496702] usb-storage: device found at 3
[ 1840.496706] usb-storage: waiting for device to settle before scanning
[ 1845.496325] usb-storage: device scan complete
[ 1845.656787] scsi 0:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2
[ 1845.758306] Driver 'sd' needs updating - please use bus_type methods
[ 1845.762376] sd 0:0:0:0: [sda] 4005886 512-byte hardware sectors (2051 MB)
[ 1845.763135] sd 0:0:0:0: [sda] Write Protect is off
[ 1845.763141] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 1845.763145] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 1845.766122] sd 0:0:0:0: [sda] 4005886 512-byte hardware sectors (2051 MB)
[ 1845.766876] sd 0:0:0:0: [sda] Write Protect is off
[ 1845.766883] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 1845.766886] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 1845.766893] sda: sda1
[ 1845.767836] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 1846.866155] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 2108.000011] UDF-fs: No VRS found
[ 2108.000011] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2108.255701] ISO 9660 Extensions: RRIP_1991A
[ 2128.754512] UDF-fs: No VRS found
[ 2128.758822] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2128.975524] ISO 9660 Extensions: RRIP_1991A
[ 2194.055333] UDF-fs: No VRS found
[ 2194.057430] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2194.296930] ISO 9660 Extensions: RRIP_1991A
[ 2336.541737] UDF-fs: No VRS found
[ 2336.562734] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2336.584778] ISOFS: changing to secondary root
[ 2477.826251] firmware: requesting zd1211/zd1211b_ub
[ 2477.844099] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2477.844108] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2479.934853] eth0: link down
[ 2479.935178] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2539.878054] firmware: requesting zd1211/zd1211b_ub
[ 2539.892412] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2539.892422] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2542.010022] eth0: link down
[ 2542.010382] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2559.795387] firmware: requesting zd1211/zd1211b_ub
[ 2559.816314] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2559.816324] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2562.003095] eth0: link down
[ 2562.003419] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2562.556370] firmware: requesting zd1211/zd1211b_ub
[ 2562.570551] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2562.570561] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2579.620339] firmware: requesting zd1211/zd1211b_ub
[ 2579.634459] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2579.634469] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2583.216345] firmware: requesting zd1211/zd1211b_ub
[ 2583.230070] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2583.230079] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2596.672349] firmware: requesting zd1211/zd1211b_ub
[ 2596.685973] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2596.685984] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2600.832465] firmware: requesting zd1211/zd1211b_ub
[ 2600.854958] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2600.854969] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2602.177259] firmware: requesting zd1211/zd1211b_ub
[ 2602.189077] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2602.189087] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2656.827873] firmware: requesting zd1211/zd1211b_ub
[ 2656.842532] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2656.842541] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2657.951689] firmware: requesting zd1211/zd1211b_ub
[ 2657.963205] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2657.963215] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2732.495608] firmware: requesting zd1211/zd1211b_ub
[ 2732.509342] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2732.509353] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2733.616465] firmware: requesting zd1211/zd1211b_ub
[ 2733.629827] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2733.629837] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2736.258723] firmware: requesting zd1211/zd1211b_ub
[ 2736.272212] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2736.272223] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2736.272337] firmware: requesting zd1211/zd1211b_ub
[ 2736.292276] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2736.292286] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2762.758134] firmware: requesting zd1211/zd1211b_ub
[ 2762.771819] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2762.771829] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2764.836981] eth0: link down
[ 2764.837304] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2847.030678] firmware: requesting zd1211/zd1211b_ub
[ 2847.042724] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2847.042734] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2847.042853] firmware: requesting zd1211/zd1211b_ub
[ 2847.066725] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2847.066735] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2849.184575] firmware: requesting zd1211/zd1211b_ub
[ 2849.198506] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2849.198516] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2851.444403] eth0: link down
[ 2851.445026] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2879.825744] firmware: requesting zd1211/zd1211b_ub
[ 2879.857532] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2879.857542] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2879.857678] firmware: requesting zd1211/zd1211b_ub
[ 2879.891287] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2879.891297] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2882.003328] firmware: requesting zd1211/zd1211b_ub
[ 2882.018756] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2882.018766] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2884.141992] eth0: link down
[ 2884.142245] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2917.496269] firmware: requesting zd1211/zd1211b_ub
[ 2917.509917] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2917.509926] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2917.655169] firmware: requesting zd1211/zd1211b_ub
[ 2917.669215] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2917.669225] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2917.669346] firmware: requesting zd1211/zd1211b_ub
[ 2917.690444] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2917.690454] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2943.917070] firmware: requesting zd1211/zd1211b_ub
[ 2943.930873] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 2943.930882] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 2946.002565] eth0: link down
[ 2946.002933] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3210.030860] firmware: requesting zd1211/zd1211b_ub
[ 3210.044846] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3210.044856] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3210.044979] firmware: requesting zd1211/zd1211b_ub
[ 3210.065327] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3210.065336] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3235.248601] firmware: requesting zd1211/zd1211b_ub
[ 3235.262272] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3235.262282] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3237.337350] eth0: link down
[ 3237.337672] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3281.364342] firmware: requesting zd1211/zd1211b_ub
[ 3281.378022] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3281.378032] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3283.720702] eth0: link down
[ 3283.721059] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3325.540745] firmware: requesting zd1211/zd1211b_ub
[ 3325.551847] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3325.551857] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3325.551976] firmware: requesting zd1211/zd1211b_ub
[ 3325.571699] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3325.571709] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3325.960360] firmware: requesting zd1211/zd1211b_ub
[ 3325.971561] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3325.971571] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3325.972474] firmware: requesting zd1211/zd1211b_ub
[ 3326.003558] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3326.003567] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3328.118251] firmware: requesting zd1211/zd1211b_ub
[ 3328.133770] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3328.133779] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3330.327149] eth0: link down
[ 3330.327899] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3384.475893] firmware: requesting zd1211/zd1211b_ub
[ 3384.489471] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3384.489480] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3384.491669] firmware: requesting zd1211/zd1211b_ub
[ 3384.518236] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3384.518245] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3386.611251] firmware: requesting zd1211/zd1211b_ub
[ 3386.624716] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3386.624727] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3388.740963] eth0: link down
[ 3388.741301] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3414.456161] firmware: requesting zd1211/zd1211b_ub
[ 3414.467364] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3414.467374] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3414.467502] firmware: requesting zd1211/zd1211b_ub
[ 3414.490330] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3414.490340] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3416.609657] firmware: requesting zd1211/zd1211b_ub
[ 3416.625729] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3416.625738] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3418.839455] eth0: link down
[ 3418.840083] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3448.652759] firmware: requesting zd1211/zd1211b_ub
[ 3448.663952] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3448.663962] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3448.664516] firmware: requesting zd1211/zd1211b_ub
[ 3448.684084] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3448.684093] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3451.430507] firmware: requesting zd1211/zd1211b_ub
[ 3451.444066] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3451.444076] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3453.573412] eth0: link down
[ 3453.573662] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3470.670564] firmware: requesting zd1211/zd1211b_ub
[ 3470.682179] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3470.682190] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3470.682686] firmware: requesting zd1211/zd1211b_ub
[ 3470.705483] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3470.705493] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3472.825008] firmware: requesting zd1211/zd1211b_ub
[ 3472.838896] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3472.838905] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3475.052561] eth0: link down
[ 3475.053174] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3505.983818] firmware: requesting zd1211/zd1211b_ub
[ 3505.997608] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3505.997617] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3505.999796] firmware: requesting zd1211/zd1211b_ub
[ 3506.016291] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3506.016300] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3508.112314] firmware: requesting zd1211/zd1211b_ub
[ 3508.126099] usb 5-4: Could not load firmware file zd1211/zd1211b_ub. Error number -2
[ 3508.126109] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2
[ 3510.194332] eth0: link down
[ 3510.194657] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3952.849257] usb 5-2: USB disconnect, address 3
[ 8847.940006] usb 5-2: new high speed USB device using ehci_hcd and address 4
[ 8848.383157] usb 5-2: configuration #1 chosen from 1 choice
[ 8848.384209] scsi1 : SCSI emulation for USB Mass Storage devices
[ 8848.384604] usb 5-2: New USB device found, idVendor=058f, idProduct=6387
[ 8848.384609] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8848.384614] usb 5-2: Product: Mass Storage Device
[ 8848.384617] usb 5-2: Manufacturer: JetFlash
[ 8848.384619] usb 5-2: SerialNumber: FVJQ72C3
[ 8848.384638] usb-storage: device found at 4
[ 8848.384641] usb-storage: waiting for device to settle before scanning
[ 8853.384286] usb-storage: device scan complete
[ 8853.388776] scsi 1:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2
[ 8853.403635] sd 1:0:0:0: [sda] 4005886 512-byte hardware sectors (2051 MB)
[ 8853.404420] sd 1:0:0:0: [sda] Write Protect is off
[ 8853.404426] sd 1:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 8853.404429] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 8853.407628] sd 1:0:0:0: [sda] 4005886 512-byte hardware sectors (2051 MB)
[ 8853.408438] sd 1:0:0:0: [sda] Write Protect is off
[ 8853.408444] sd 1:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 8853.408447] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 8853.408460] sda: sda1
[ 8853.409343] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 8854.172364] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!



iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

eth1 no wireless extensions.

wmaster0 no wireless extensions.

wlan0 IEEE 802.11 ESSID:"connx"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:736E-7070-6B65-7230-3231-3938-39
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0





sudo iwlist scan



lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

eth1 Interface doesn't support scanning.

wmaster0 Interface doesn't support scanning.

wlan0 Interface doesn't support scanning : Network is down


[logari81]

[ 3505.997617] zd1211rw 5-4:1.0: couldn't load firmware. Error number -2

στο λεει ξεκαθαρα, το firmware του λειπει, όχι o driver. Για το που θα βρεις το firmware θα πρεπει να δεις εδώ

http://wiki.debian.org/zd1211rw

εκει που λεει

Non-free firmware is required, which can be provided by installing the zd1211-firmware package.

[elefher]

δεν μπορω να εγκαταστησω με τιποτα το firmware .Μου λεει οτι δεν βρισκει το αρχειω.
κατεβασα και αυτα εδω http://packages.debian.org/lenny/all/zd1211-firmware/download
http://packages.debian.org/lenny/i386/wireless-tools/download
αλλα παλι τιποτα δεν μπορω να τα κανω εγκατασταση λεει οτι δεν αναγνωριζει το τυπο τον αρχειων
καμια αλλη ιδεα?