Έλεγχος σκληρού δίσκου Hardware

...το μέρος για να ξεκινήσετε!

Συντονιστής: adem1

Κανόνες Δ. Συζήτησης
Παρακαλώ να επιλέξετε, με προσοχή, την άδεια που θέλετε να έχουν οι οδηγοί που συγγράφετε.
Πληροφορίες για τις άδειες μπορείτε να βρείτε εδώ.
Άμα επιθυμείτε κάποια άλλη άδεια επικοινωνήστε με κάποιο Διαχειριστή είτε Συντονιστή.

Σημαντικό είναι να χρησιμοποιήσετε την υπηρεσία http://imagebin.ubuntu-gr.org για τις εικόνες.

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό g1wrg0s » 29 Μάιος 2012, 18:03

στο εργαλειο δισκων του ubuntu εχει τα ιδια αποτελεσματα για τον σκληρο. Η μονη διαφορα οτι εκει τον βγαζει "Υγιες" και καλα . Μπορεις να γινεις λιγο πιο ξεκαθαρος οταν λες "Εχει προβλημα" ; . Με λιγα λογια θελω να ξερω αν η αναγκη αποκαταστασης του ειναι αμεση ή εχω καποιο χρονο μεχρι να δω τι θα κανω .
Spoiler: show
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πρώτα βήματα
2 Ubuntu 12.10 quantal 3.10.20-031020-generic 32bit (el_GR.UTF-8, Unity ubuntu), Windows 8
3 Intel Core i5-3230M CPU @ 2.60GHz ‖ RAM 7923 MiB ‖ Acer VA50_HC_CR - Acer Aspire V3-571G
4 Intel 3rd Gen Core processor Graphics Controller [8086:0166] {i915} ⋮ nVidia Device [10de:0fe1] {}
5 eth0: Broadcom NetLink BCM57785 Gigabit Ethernet PCIe [14e4:16b5] (rev 10) ⋮ wlan0: Atheros Inc. AR9462 Wireless Network Adapter [168c:0034] (rev 01)
g1wrg0s
punkTUX
punkTUX
 
Δημοσιεύσεις: 196
Εγγραφή: 26 Μάιος 2012, 10:29
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό the_eye » 29 Μάιος 2012, 22:02

Το εργαλείο δίσκων κοιτάζει μόνο για bad sectors. Οπότε αρκετές φορές δεν αντικατοπτρίζει την εικόνα του δίσκου.
Δες τις γραμμές που σου παρέθεσα στο προηγούμενο μήνυμα με τα errors. Οι κανονικές τιμές θα έπρεπε να ήταν μηδέν.

Δεν νομίζω ότι κανένας μπορεί να εκτιμήσει πότε θα χαλάσει μια ηλεκτρομηχανική συσκευή, απλά εντοπίζουμε ότι έχει πρόβλημα στην λειτουργία της.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό kouskous » 02 Ιουν 2012, 13:17

τον δικο μου πως το βλεπετε παιδια???

Κώδικας: Επιλογή όλων
eric@kouskous:~$ sudo smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-25-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD3200BEVT-75A23T0
Serial Number:    WD-WXD1A20L6736
LU WWN Device Id: 5 0014ee 25985c789
Firmware Version: 01.01A01
User Capacity:    320,072,933,376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sat Jun  2 13:09:26 2012 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       ( 7800) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     (  93) minutes.
Conveyance self-test routine
recommended polling time:     (   5) minutes.
SCT capabilities:           (0x7037)   SCT Status supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       1641
  3 Spin_Up_Time            0x0027   155   150   021    Pre-fail  Always       -       1225
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2041
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       4723
10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1582
191 G-Sense_Error_Rate      0x0032   001   001   000    Old_age   Always       -       10246
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       512
193 Load_Cycle_Count        0x0032   180   180   000    Old_age   Always       -       62995
194 Temperature_Celsius     0x0022   113   091   000    Old_age   Always       -       30
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0
240 Head_Flying_Hours       0x0032   094   094   000    Old_age   Always       -       4687
241 Total_LBAs_Written      0x0032   200   200   000    Old_age   Always       -       10977896548
242 Total_LBAs_Read         0x0032   200   200   000    Old_age   Always       -       8821256601
254 Free_Fall_Sensor        0x0032   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Conveyance offline  Completed: read failure       90%      4703         128159107
# 2  Extended offline    Completed: read failure       90%      4703         128226564
# 3  Conveyance offline  Completed: read failure       90%      4703         128226564
# 4  Short offline       Completed: read failure       90%      4703         128226564
# 5  Offline             Interrupted (host reset)      00%      4220         -
# 6  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Ικανοποιητικό
2 Ubuntu 19.10 eoan 5.3.0-24-generic 64bit (en_US.UTF-8, ubuntu:GNOME ubuntu), Ubuntu 5.3.0-18-generic
3 AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx ‖ RAM 15023 MiB ‖ HP 84D2 - HP HP Laptop 17-ca0xxx
4 Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] {amdgpu}
5 eno1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) ⋮ wlp3s0: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
kouskous
punkTUX
punkTUX
 
Δημοσιεύσεις: 173
Εγγραφή: 18 Νοέμ 2008, 23:25
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό Learner » 03 Ιουν 2012, 04:28

Περίμενε να σου πει και κάποιος που ξέρει καλύτερα , αυτό που καταλαβαίνω εγώ είναι πως σε γενικές γραμμές καλά είναι ο δίσκος σου , αλλά μήπως....
..."έχεις κάνει το laptop φραπέ" ; :P
kouskous έγραψε:
Κώδικας: Επιλογή όλων
1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       1641
191 G-Sense_Error_Rate      0x0032   001   001   000    Old_age   Always       -       10246
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9765
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό kouskous » 03 Ιουν 2012, 20:35

τι θες να πεις???? ο δισκος ειναι φορμαρισμενος και εχει 4 κομματια...
3 για το ubuntu και 1 για τα win7....
αν εχω κανει καποιο λαθος που μπορει να κανει το δισκο να συμπεριφερετε καλυτερα...απλα ακουω!!!
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Ικανοποιητικό
2 Ubuntu 19.10 eoan 5.3.0-24-generic 64bit (en_US.UTF-8, ubuntu:GNOME ubuntu), Ubuntu 5.3.0-18-generic
3 AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx ‖ RAM 15023 MiB ‖ HP 84D2 - HP HP Laptop 17-ca0xxx
4 Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] {amdgpu}
5 eno1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) ⋮ wlp3s0: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
kouskous
punkTUX
punkTUX
 
Δημοσιεύσεις: 173
Εγγραφή: 18 Νοέμ 2008, 23:25
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό the_eye » 03 Ιουν 2012, 20:39

Ο αισθητήρας κραδασμών του δίσκου έχει εντοπίσει πολλούς κραδασμούς, θα ήταν καλό να μην το μετακινείς εν' ώρα λειτουργίας.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό kouskous » 03 Ιουν 2012, 20:42

δεν τον μετακινω ειναι πανω σε μια βαση μονημα το λαπτοπ....λες να εχω προβλημα απο αυτο?
το 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1641 εγινε 1644 κακο αυτο?
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Ικανοποιητικό
2 Ubuntu 19.10 eoan 5.3.0-24-generic 64bit (en_US.UTF-8, ubuntu:GNOME ubuntu), Ubuntu 5.3.0-18-generic
3 AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx ‖ RAM 15023 MiB ‖ HP 84D2 - HP HP Laptop 17-ca0xxx
4 Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] {amdgpu}
5 eno1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) ⋮ wlp3s0: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
kouskous
punkTUX
punkTUX
 
Δημοσιεύσεις: 173
Εγγραφή: 18 Νοέμ 2008, 23:25
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό Learner » 03 Ιουν 2012, 20:56

kouskous έγραψε:δεν τον μετακινω ειναι πανω σε μια βαση μονημα το λαπτοπ....λες να εχω προβλημα απο αυτο?
το 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1641 εγινε 1644 κακο αυτο?


Οι κραδασμοί αυξήθηκαν ;
Κώδικας: Επιλογή όλων
191 G-Sense_Error_Rate


η τιμή του Read_Error_Rate δεν είναι στάνταρ για όλους τους δίσκους. Διάβασε εδώ --> Δεδομένα S.M.A.R.T σχετικά με αυτή την τιμή.
Καλό βέβαια δεν είναι που αυξάνει , αλλά δεν ξέρω κατά πόσο πρέπει να ανησυχείς αφού οι υπόλοιπες τιμές φαίνονται καλές .
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9765
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό kouskous » 03 Ιουν 2012, 21:01

οχι φιλε μου αυτοι εως τωρα ειναι σταθεροι αλλα αν συνδιασω τα γεγονοτα πριν κανενα μηνα ξαφνικα δεν ανοιγε το pc οποτε δεν ηξερα τι φτεει και αναγκαστηκα να ξανακανω εγκατασταση απο την αρχη...
ισως την εχει ακουσει ο σκληρος και ειμαι σιγα σιγα για αλλαγη
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Ικανοποιητικό
2 Ubuntu 19.10 eoan 5.3.0-24-generic 64bit (en_US.UTF-8, ubuntu:GNOME ubuntu), Ubuntu 5.3.0-18-generic
3 AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx ‖ RAM 15023 MiB ‖ HP 84D2 - HP HP Laptop 17-ca0xxx
4 Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] {amdgpu}
5 eno1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) ⋮ wlp3s0: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
kouskous
punkTUX
punkTUX
 
Δημοσιεύσεις: 173
Εγγραφή: 18 Νοέμ 2008, 23:25
Εκτύπωση

Σφαλμα Δισκου - S.M.A.R.T. Failure

Δημοσίευσηαπό Πετραν » 09 Ιουν 2012, 23:08

ενας η/υ στην εκκινηση του μου δηλωνει S.M.A.R.T. Failure

του εκανα ενα τσεκ με smartmontools
και μου επεστρεψε αυτο το log
Κώδικας: Επιλογή όλων
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-23-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD1600BEVS-07RST0
Serial Number:    WD-WXE807637478
LU WWN Device Id: 5 0014ee 2ab1b1e8c
Firmware Version: 04.01G04
User Capacity:    160.041.885.696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sat Jun  9 22:42:13 2012 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       ( 6780) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     (  87) minutes.
Conveyance self-test routine
recommended polling time:     (   6) minutes.
SCT capabilities:           (0x103f)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       115
  3 Spin_Up_Time            0x0003   189   186   021    Pre-fail  Always       -       1508
  4 Start_Stop_Count        0x0032   097   097   000    Old_age   Always       -       3072
  5 Reallocated_Sector_Ct   0x0033   133   133   140    Pre-fail  Always   FAILING_NOW 536
  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       1507
10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1636
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       476
193 Load_Cycle_Count        0x0032   189   189   000    Old_age   Always       -       34031
194 Temperature_Celsius     0x0022   100   091   000    Old_age   Always       -       47
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       4
198 Offline_Uncorrectable   0x0010   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 80 (device log contains only the most recent five errors)
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 80 occurred at disk power-on lifetime: 1480 hours (61 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 48 0c c1 e0  Error: UNC 8 sectors at LBA = 0x00c10c48 = 12651592

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 48 0c c1 11 08      00:12:38.200  READ DMA EXT
  ef 10 02 00 00 00 00 08      00:12:38.199  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 00 08      00:12:38.199  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:12:38.199  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:12:38.199  SET FEATURES [Set transfer mode]

Error 79 occurred at disk power-on lifetime: 1480 hours (61 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 48 0c c1 e0  Error: UNC 8 sectors at LBA = 0x00c10c48 = 12651592

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 48 0c c1 11 08      00:12:35.179  READ DMA EXT
  ef 10 02 00 00 00 00 08      00:12:35.179  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 00 08      00:12:35.179  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:12:35.179  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:12:35.179  SET FEATURES [Set transfer mode]

Error 78 occurred at disk power-on lifetime: 1480 hours (61 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 48 0c c1 e0  Error: UNC 8 sectors at LBA = 0x00c10c48 = 12651592

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 48 0c c1 11 08      00:12:32.338  READ DMA EXT
  ef 10 02 00 00 00 00 08      00:12:32.337  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 00 08      00:12:32.337  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:12:32.337  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:12:32.337  SET FEATURES [Set transfer mode]

Error 77 occurred at disk power-on lifetime: 1480 hours (61 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 48 0c c1 e0  Error: UNC 8 sectors at LBA = 0x00c10c48 = 12651592

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 48 0c c1 11 08      00:12:29.153  READ DMA EXT
  ef 10 02 00 00 00 00 08      00:12:29.153  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 00 08      00:12:29.153  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:12:29.153  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:12:29.153  SET FEATURES [Set transfer mode]

Error 76 occurred at disk power-on lifetime: 1480 hours (61 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  01 51 08 48 0c c1 e0  Error: AMNF 8 sectors at LBA = 0x00c10c48 = 12651592

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 48 0c c1 11 08      00:12:26.308  READ DMA EXT
  ef 10 02 00 00 00 00 08      00:12:26.308  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 00 08      00:12:26.307  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:12:26.307  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:12:26.307  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

και καθως δεν εχω προηγουμενες παρτιδες με τετοιου ειδους προβληματα αποφασισα να ρωτησω την γνωμη σας επι του θεματος.
καθε αποψη δεκτή!
1 Γνώσεις Linux: Ποτέ αρκετές ┃ Προγραμματισμού: Λίγες ┃ Αγγλικών: Ικανοποιητικό
2 Ubuntu 12.04 precise 3.5.0-40-generic 64bit (el_GR.UTF-8, GNOME)
3 Pentium Dual-Core CPU T4500 2.30GHz ‖ RAM 3917 MiB ‖ Dell Inc. 0N7J7M - Dell Inc. Inspiron N5030
4 Intel Mobile 4 Series Chipset Integrated Graphics [8086:2a42] {i915}
5 eth0: Atheros Inc. AR8152 v2.0 [1969:2062] (rev c1) ⋮ wlan0: Atheros Inc. AR9285 (PCI-Express) [168c:002b] (rev 01)
Πετραν
punkTUX
punkTUX
 
Δημοσιεύσεις: 259
Εγγραφή: 04 Μαρ 2012, 12:51
Εκτύπωση

ΠροηγούμενηΕπόμενο

Επιστροφή στο Οδηγοί - How to - Tutorials