help error 71

[sean]

ξερει κανεις τι ακριβως ειναι το error 71??εδω και μερικες μερες οποτε ανοιγω τον υπολογιστη και μπαινω απο το ubuntu μου βγαζει αυτο το error 71 και κατι αλλα και πρεπει να πατησω exit και να περιμενω καμια φορα δεν πιανει και κανω και restart....ειδα πως ειναι καποιο προβλημα σχετικο με τις θυρες usb sorry αν κανω λαθος...μπορει να βοηθησει κανεις????ευχαριστω....

[xaris2335]

Για δώσε τις εντολές

Κώδικας: Επιλογή όλων

lsusb
dmesg

[sean]

thnx θα το δοκιμασω και θα σου πω...

[sean]

Κώδικας: Επιλογή όλων

[ 0.174485] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.174558] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.174630] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.174703] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.174776] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.174851] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.174993] SCSI subsystem initialized
[ 0.175024] libata version 3.00 loaded.
[ 0.175024] usbcore: registered new interface driver usbfs
[ 0.175024] usbcore: registered new interface driver hub
[ 0.175024] usbcore: registered new device driver usb
[ 0.175024] ACPI: WMI: Mapper loaded
[ 0.175024] PCI: Using ACPI for IRQ routing
[ 0.184006] Bluetooth: Core ver 2.15
[ 0.184016] NET: Registered protocol family 31
[ 0.184016] Bluetooth: HCI device and connection manager initialized
[ 0.184016] Bluetooth: HCI socket layer initialized
[ 0.184016] NetLabel: Initializing
[ 0.184016] NetLabel: domain hash size = 128
[ 0.184016] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.184026] NetLabel: unlabeled traffic allowed by default
[ 0.184048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.184052] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.200005] pnp: PnP ACPI init
[ 0.200013] ACPI: bus type pnp registered
[ 0.201951] pnp: PnP ACPI: found 14 devices
[ 0.201953] ACPI: ACPI bus type pnp unregistered
[ 0.201957] PnPBIOS: Disabled by ACPI PNP
[ 0.201965] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.201968] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.201970] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.201972] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.201974] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.201980] system 00:0a: ioport range 0x400-0x4cf could not be reserved
[ 0.201985] system 00:0b: iomem range 0xc0000000-0xcfffffff has been reserved
[ 0.201989] system 00:0c: iomem range 0xce000-0xcffff has been reserved
[ 0.201991] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.201993] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.201996] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.201998] system 00:0c: iomem range 0xbfee0000-0xbfefffff could not be reserved
[ 0.202000] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.202002] system 00:0c: iomem range 0x100000-0xbfedffff could not be reserved
[ 0.202004] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.202007] system 00:0c: iomem range 0xfed13000-0xfed1dfff has been reserved
[ 0.202009] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.202011] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.202013] system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.202015] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.202017] system 00:0c: iomem range 0xe0000-0xeffff has been reserved
[ 0.236632] AppArmor: AppArmor Filesystem Enabled
[ 0.236666] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.236668] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.236672] pci 0000:00:01.0: MEM window: 0xe0000000-0xe3ffffff
[ 0.236675] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.236678] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.236681] pci 0000:00:1c.0: IO window: 0xb000-0xbfff
[ 0.236685] pci 0000:00:1c.0: MEM window: disabled
[ 0.236688] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.236691] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.236694] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
[ 0.236698] pci 0000:00:1c.1: MEM window: 0xe4000000-0xe4ffffff
[ 0.236701] pci 0000:00:1c.1: PREFETCH window: 0x000000e5000000-0x000000e50fffff
[ 0.236706] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.236709] pci 0000:00:1e.0: IO window: 0xa000-0xafff
[ 0.236713] pci 0000:00:1e.0: MEM window: disabled
[ 0.236716] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.236723] alloc irq_desc for 16 on node -1
[ 0.236725] alloc kstat_irqs on node -1
[ 0.236729] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.236733] pci 0000:00:01.0: setting latency timer to 64
[ 0.236739] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.236742] pci 0000:00:1c.0: setting latency timer to 64
[ 0.236747] alloc irq_desc for 17 on node -1
[ 0.236749] alloc kstat_irqs on node -1
[ 0.236751] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.236755] pci 0000:00:1c.1: setting latency timer to 64
[ 0.236760] pci 0000:00:1e.0: setting latency timer to 64
[ 0.236763] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.236765] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.236767] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.236769] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe3ffffff]
[ 0.236771] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.236774] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.236775] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.236777] pci_bus 0000:03: resource 1 mem: [0xe4000000-0xe4ffffff]
[ 0.236779] pci_bus 0000:03: resource 2 pref mem [0xe5000000-0xe50fffff]
[ 0.236781] pci_bus 0000:04: resource 0 io: [0xa000-0xafff]
[ 0.236783] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.236785] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.236811] NET: Registered protocol family 2
[ 0.236886] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.237124] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.237533] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.237729] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.237730] TCP reno registered
[ 0.237789] NET: Registered protocol family 1
[ 0.237837] Trying to unpack rootfs image as initramfs...
[ 0.384680] Freeing initrd memory: 7480k freed
[ 0.388135] cpufreq-nforce2: No nForce2 chipset.
[ 0.388159] Scanning for low memory corruption every 60 seconds
[ 0.388246] audit: initializing netlink socket (disabled)
[ 0.388261] type=2000 audit(1276533850.387:1): initialized
[ 0.394996] highmem bounce pool size: 64 pages
[ 0.395000] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.396166] VFS: Disk quotas dquot_6.5.2
[ 0.396217] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.396652] fuse init (API version 7.12)
[ 0.396718] msgmni has been set to 1679
[ 0.396882] alg: No test for stdrng (krng)
[ 0.396892] io scheduler noop registered
[ 0.396894] io scheduler anticipatory registered
[ 0.396895] io scheduler deadline registered
[ 0.396931] io scheduler cfq registered (default)
[ 0.397023] pci 0000:01:00.0: Boot video device
[ 0.397108] alloc irq_desc for 24 on node -1
[ 0.397109] alloc kstat_irqs on node -1
[ 0.397117] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.397122] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.397202] alloc irq_desc for 25 on node -1
[ 0.397203] alloc kstat_irqs on node -1
[ 0.397209] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.397216] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.397309] alloc irq_desc for 26 on node -1
[ 0.397311] alloc kstat_irqs on node -1
[ 0.397317] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.397323] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.397392] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.397452] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.397560] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.397563] ACPI: Power Button [PWRF]
[ 0.397604] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.397606] ACPI: Power Button [PWRB]
[ 0.397998] ACPI: SSDT bfee74c0 002AE (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.398147] processor LNXCPU:00: registered as cooling_device0
[ 0.398150] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.398306] ACPI: SSDT bfee7980 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.398468] processor LNXCPU:01: registered as cooling_device1
[ 0.398471] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.399625] isapnp: Scanning for PnP cards...
[ 0.501474] Switched to high resolution mode on CPU 1
[ 0.503988] Switched to high resolution mode on CPU 0
[ 0.752465] isapnp: No Plug & Play device found
[ 0.753321] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.753416] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.753690] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.754519] brd: module loaded
[ 0.754869] loop: module loaded
[ 0.754919] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.754996] ata_piix 0000:00:1f.2: version 2.13
[ 0.755008] alloc irq_desc for 19 on node -1
[ 0.755009] alloc kstat_irqs on node -1
[ 0.755014] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.755018] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.755047] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.755103] scsi0 : ata_piix
[ 0.755159] scsi1 : ata_piix
[ 0.755660] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.755662] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.756289] Fixed MDIO Bus: probed
[ 0.756315] PPP generic driver version 2.4.2
[ 0.756376] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.756391] alloc irq_desc for 23 on node -1
[ 0.756393] alloc kstat_irqs on node -1
[ 0.756396] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.756404] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.756407] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.756432] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.756436] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.760340] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.760350] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe5104000
[ 0.772006] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.772067] usb usb1: configuration #1 chosen from 1 choice
[ 0.772092] hub 1-0:1.0: USB hub found
[ 0.772098] hub 1-0:1.0: 8 ports detected
[ 0.772145] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.772157] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.772173] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.772177] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.772180] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.772200] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.772219] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
[ 0.772278] usb usb2: configuration #1 chosen from 1 choice
[ 0.772297] hub 2-0:1.0: USB hub found
[ 0.772302] hub 2-0:1.0: 2 ports detected
[ 0.772334] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.772339] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.772341] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.772362] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.772387] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
[ 0.772444] usb usb3: configuration #1 chosen from 1 choice
[ 0.772467] hub 3-0:1.0: USB hub found
[ 0.772472] hub 3-0:1.0: 2 ports detected
[ 0.772508] alloc irq_desc for 18 on node -1
[ 0.772509] alloc kstat_irqs on node -1
[ 0.772513] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.772517] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.772519] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.772543] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.772568] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
[ 0.772625] usb usb4: configuration #1 chosen from 1 choice
[ 0.772644] hub 4-0:1.0: USB hub found
[ 0.772649] hub 4-0:1.0: 2 ports detected
[ 0.772682] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.772686] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.772689] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.772713] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.772738] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
[ 0.772794] usb usb5: configuration #1 chosen from 1 choice
[ 0.772812] hub 5-0:1.0: USB hub found
[ 0.772817] hub 5-0:1.0: 2 ports detected
[ 0.772887] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.772889] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.772974] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.773012] mice: PS/2 mouse device common for all mice
[ 0.773090] rtc_cmos 00:04: RTC can wake from S4
[ 0.773115] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.773136] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.773210] device-mapper: uevent: version 1.0.3
[ 0.773282] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.773331] device-mapper: multipath: version 1.1.0 loaded
[ 0.773333] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.773413] EISA: Probing bus 0 at eisa.0
[ 0.773436] EISA: Detected 0 cards.
[ 0.773494] cpuidle: using governor ladder
[ 0.773496] cpuidle: using governor menu
[ 0.773866] TCP cubic registered
[ 0.773986] NET: Registered protocol family 10
[ 0.774329] lo: Disabled Privacy Extensions
[ 0.774580] NET: Registered protocol family 17
[ 0.774594] Bluetooth: L2CAP ver 2.13
[ 0.774595] Bluetooth: L2CAP socket layer initialized
[ 0.774598] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.774599] Bluetooth: SCO socket layer initialized
[ 0.774618] Bluetooth: RFCOMM TTY layer initialized
[ 0.774620] Bluetooth: RFCOMM socket layer initialized
[ 0.774621] Bluetooth: RFCOMM ver 1.11
[ 0.776147] Using IPI No-Shortcut mode
[ 0.776231] PM: Resume from disk failed.
[ 0.776242] registered taskstats version 1
[ 0.776328] Magic number: 14:432:742
[ 0.776394] rtc_cmos 00:04: setting system clock to 2010-06-14 16:44:11 UTC (1276533851)
[ 0.776396] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.776397] EDD information not available.
[ 0.789655] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.916477] ata2.00: ATAPI: Optiarc DVD RW AD-7200A, 1.09, max UDMA/66
[ 0.932210] ata2.00: configured for UDMA/66
[ 1.036172] ata1.00: HPA unlocked: 976771055 -> 976773168, native 976773168
[ 1.036176] ata1.00: ATA-8: ST3500418AS, CC34, max UDMA/133
[ 1.036178] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.094214] ata1.00: configured for UDMA/133
[ 1.094303] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC34 PQ: 0 ANSI: 5
[ 1.094393] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.094421] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.094454] sd 0:0:0:0: [sda] Write Protect is off
[ 1.094456] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.094474] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.094568] sda:
[ 1.096258] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7200A 1.09 PQ: 0 ANSI: 5
[ 1.100837] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.100839] Uniform CD-ROM driver Revision: 3.20
[ 1.100899] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.100927] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.115739] sda1
[ 1.115872] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.115885] Freeing unused kernel memory: 544k freed
[ 1.116102] Write protecting the kernel text: 4584k
[ 1.116135] Write protecting the kernel read-only data: 1844k
[ 1.213467] Linux agpgart interface v0.103
[ 1.243917] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.243934] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.243964] r8169 0000:03:00.0: setting latency timer to 64
[ 1.244005] alloc irq_desc for 27 on node -1
[ 1.244007] alloc kstat_irqs on node -1
[ 1.244020] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[ 1.244561] eth0: RTL8102e at 0xf80c0000, 00:24:1d:3f:b6:99, XID 34a00000 IRQ 27
[ 1.258411] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 6.376013] usb 1-3: device descriptor read/64, error -71
[ 11.604011] usb 1-3: device descriptor read/64, error -71
[ 11.820011] usb 1-3: new high speed USB device using ehci_hcd and address 5
[ 16.940010] usb 1-3: device descriptor read/64, error -71
[ 22.164012] usb 1-3: device descriptor read/64, error -71
[ 22.380009] usb 1-3: new high speed USB device using ehci_hcd and address 6
[ 27.792506] usb 1-3: device not accepting address 6, error -71
[ 27.904008] usb 1-3: new high speed USB device using ehci_hcd and address 7
[ 33.312005] usb 1-3: device not accepting address 7, error -71
[ 33.312017] hub 1-0:1.0: unable to enumerate USB device on port 3
[ 33.448007] usb 1-8: new high speed USB device using ehci_hcd and address 8
[ 33.588475] usb 1-8: configuration #1 chosen from 1 choice
[ 33.596667] Initializing USB Mass Storage driver...
[ 33.596769] scsi2 : SCSI emulation for USB Mass Storage devices
[ 33.596871] usb-storage: device found at 8
[ 33.596872] usb-storage: waiting for device to settle before scanning
[ 33.596879] usbcore: registered new interface driver usb-storage
[ 33.596881] USB Mass Storage support registered.
[ 33.828008] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 34.005287] usb 2-1: configuration #1 chosen from 1 choice
[ 34.020208] usbcore: registered new interface driver hiddev
[ 34.035407] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
[ 34.035470] generic-usb 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[ 34.065299] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input5
[ 34.065368] generic-usb 0003:046D:C521.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[ 34.065380] usbcore: registered new interface driver usbhid
[ 34.065382] usbhid: v2.6:USB HID core driver
[ 34.256009] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 34.424283] usb 2-2: configuration #1 chosen from 1 choice
[ 34.664006] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 38.597035] usb-storage: device scan complete
[ 38.598027] scsi 2:0:0:0: Direct-Access LaCie Hard Drive PQ: 0 ANSI: 4
[ 38.598340] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 38.599758] sd 2:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 38.600632] sd 2:0:0:0: [sdb] Write Protect is off
[ 38.600634] sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00
[ 38.600636] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 38.603004] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 38.603007] sdb: sdb1 sdb2 < sdb5 >
[ 38.679505] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 38.679508] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 39.784509] usb 3-1: device descriptor read/64, error -71
[ 42.637494] PM: Starting manual resume from disk
[ 42.637497] PM: Resume from partition 8:21
[ 42.637498] PM: Checking hibernation image.
[ 42.637880] PM: Resume from disk failed.
[ 42.702778] kjournald starting. Commit interval 5 seconds
[ 42.702782] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.434664] type=1505 audit(1276533894.156:2): operation="profile_load" pid=773 name=/usr/share/gdm/guest-session/Xsession
[ 43.461676] type=1505 audit(1276533894.183:3): operation="profile_load" pid=774 name=/sbin/dhclient3
[ 43.462230] type=1505 audit(1276533894.183:4): operation="profile_load" pid=774 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 43.462532] type=1505 audit(1276533894.183:5): operation="profile_load" pid=774 name=/usr/lib/connman/scripts/dhclient-script
[ 43.494349] type=1505 audit(1276533894.215:6): operation="profile_load" pid=775 name=/usr/bin/evince
[ 43.503365] type=1505 audit(1276533894.223:7): operation="profile_load" pid=775 name=/usr/bin/evince-previewer
[ 43.508647] type=1505 audit(1276533894.231:8): operation="profile_load" pid=775 name=/usr/bin/evince-thumbnailer
[ 43.520789] type=1505 audit(1276533894.243:9): operation="profile_load" pid=777 name=/usr/bin/freshclam
[ 43.534682] type=1505 audit(1276533894.255:10): operation="profile_load" pid=778 name=/usr/lib/cups/backend/cups-pdf
[ 43.535328] type=1505 audit(1276533894.255:11): operation="profile_load" pid=778 name=/usr/sbin/cupsd
[ 45.008507] usb 3-1: device descriptor read/64, error -71
[ 45.224507] usb 3-1: new full speed USB device using uhci_hcd and address 3
[ 50.344508] usb 3-1: device descriptor read/64, error -71
[ 55.568508] usb 3-1: device descriptor read/64, error -71
[ 55.784364] usb 3-1: new full speed USB device using uhci_hcd and address 4
[ 61.192506] usb 3-1: device not accepting address 4, error -71
[ 61.304506] usb 3-1: new full speed USB device using uhci_hcd and address 5
[ 61.763633] udev: starting version 147
[ 61.785782] Adding 9068652k swap on /dev/sdb5. Priority:-1 extents:1 across:9068652k
[ 62.365282] intel_rng: FWH not detected
[ 62.376698] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 62.599750] lp: driver loaded but no devices found
[ 62.599898] EXT3 FS on sdb1, internal journal
[ 62.903324] nvidia: module license 'NVIDIA' taints kernel.
[ 62.903329] Disabling lock debugging due to kernel taint
[ 62.909537] input: Wacom Bamboo as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
[ 62.922370] usbcore: registered new interface driver wacom
[ 62.922373] wacom: v1.51:USB Wacom Graphire and Wacom Intuos tablet driver
[ 63.155174] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 63.155182] nvidia 0000:01:00.0: setting latency timer to 64
[ 63.155311] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.20 Thu Jun 25 19:23:24 PDT 2009
[ 63.182808] parport_pc 00:08: reported by Plug and Play ACPI
[ 63.182851] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 63.224110] ppdev: user-space parallel port driver
[ 63.280669] lp0: using parport0 (interrupt-driven).
[ 63.308786] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 63.308946] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 63.308947] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 63.308949] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 64.406522] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 64.406543] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 64.500340] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 64.696176] __ratelimit: 6 callbacks suppressed
[ 64.696179] type=1505 audit(1276523115.419:14): operation="profile_replace" pid=1488 name=/usr/share/gdm/guest-session/Xsession
[ 64.697722] type=1505 audit(1276523115.419:15): operation="profile_replace" pid=1489 name=/sbin/dhclient3
[ 64.698280] type=1505 audit(1276523115.419:16): operation="profile_replace" pid=1489 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 64.698587] type=1505 audit(1276523115.419:17): operation="profile_replace" pid=1489 name=/usr/lib/connman/scripts/dhclient-script
[ 64.703261] type=1505 audit(1276523115.423:18): operation="profile_replace" pid=1490 name=/usr/bin/evince
[ 64.712397] type=1505 audit(1276523115.435:19): operation="profile_replace" pid=1490 name=/usr/bin/evince-previewer
[ 64.717658] type=1505 audit(1276523115.439:20): operation="profile_replace" pid=1490 name=/usr/bin/evince-thumbnailer
[ 64.725051] type=1505 audit(1276523115.447:21): operation="profile_replace" pid=1492 name=/usr/bin/freshclam
[ 64.726586] type=1505 audit(1276523115.447:22): operation="profile_replace" pid=1493 name=/usr/lib/cups/backend/cups-pdf
[ 64.727236] type=1505 audit(1276523115.447:23): operation="profile_replace" pid=1493 name=/usr/sbin/cupsd
[ 64.750302] r8169: eth0: link up
[ 64.750311] r8169: eth0: link up
[ 66.716506] usb 3-1: device not accepting address 5, error -71
[ 66.716523] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 70.400680] usb 3-1: new full speed USB device using uhci_hcd and address 6
[ 70.403200] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 70.403203] vboxdrv: Successfully done.
[ 70.403204] vboxdrv: Found 2 processor cores.
[ 70.403262] vboxdrv: fAsync=0 offMin=0x186 offMax=0xf7d
[ 70.403295] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 70.403297] vboxdrv: Successfully loaded version 3.0.4 (interface 0x000e0000).
[ 71.182021] CPU0 attaching NULL sched-domain.
[ 71.182026] CPU1 attaching NULL sched-domain.
[ 71.196050] CPU0 attaching sched-domain:
[ 71.196052] domain 0: span 0-1 level MC
[ 71.196054] groups: 0 1
[ 71.196057] domain 1: span 0-1 level CPU
[ 71.196059] groups: 0-1 (__cpu_power = 2048)
[ 71.196063] CPU1 attaching sched-domain:
[ 71.196065] domain 0: span 0-1 level MC
[ 71.196066] groups: 1 0
[ 71.196069] domain 1: span 0-1 level CPU
[ 71.196071] groups: 0-1 (__cpu_power = 2048)
[ 75.100003] eth0: no IPv6 routers present
[ 75.524012] usb 3-1: device descriptor read/64, error -71
[ 80.748016] usb 3-1: device descriptor read/64, error -71
[ 80.968014] usb 3-1: new full speed USB device using uhci_hcd and address 7
[ 86.088018] usb 3-1: device descriptor read/64, error -71
[ 91.308011] usb 3-1: device descriptor read/64, error -71
[ 91.532097] usb 3-1: new full speed USB device using uhci_hcd and address 8
[ 96.944008] usb 3-1: device not accepting address 8, error -71
[ 97.064011] usb 3-1: new full speed USB device using uhci_hcd and address 9
[ 102.472007] usb 3-1: device not accepting address 9, error -71
[ 102.472023] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 102.548385] CPU0 attaching NULL sched-domain.
[ 102.548390] CPU1 attaching NULL sched-domain.
[ 102.560592] CPU0 attaching sched-domain:
[ 102.560595] domain 0: span 0-1 level MC
[ 102.560597] groups: 0 1
[ 102.560602] CPU1 attaching sched-domain:
[ 102.560604] domain 0: span 0-1 level MC
[ 102.560605] groups: 1 0
[ 341.328019] usb 3-1: new full speed USB device using uhci_hcd and address 10
[ 346.448025] usb 3-1: device descriptor read/64, error -71
[ 351.672021] usb 3-1: device descriptor read/64, error -71
[ 351.888029] usb 3-1: new full speed USB device using uhci_hcd and address 11
[ 357.008040] usb 3-1: device descriptor read/64, error -71
[ 362.232019] usb 3-1: device descriptor read/64, error -71
[ 362.448020] usb 3-1: new full speed USB device using uhci_hcd and address 12
[ 367.856513] usb 3-1: device not accepting address 12, error -71
[ 367.968519] usb 3-1: new full speed USB device using uhci_hcd and address 13
[ 373.376531] usb 3-1: device not accepting address 13, error -71
[ 373.376554] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 404.468543] usb 3-1: new full speed USB device using uhci_hcd and address 14
[ 409.588021] usb 3-1: device descriptor read/64, error -71
[ 414.812019] usb 3-1: device descriptor read/64, error -71
[ 415.028027] usb 3-1: new full speed USB device using uhci_hcd and address 15
[ 420.148019] usb 3-1: device descriptor read/64, error -71
[ 425.380022] usb 3-1: device descriptor read/64, error -71
[ 425.596021] usb 3-1: new full speed USB device using uhci_hcd and address 16
[ 431.028819] usb 3-1: device not accepting address 16, error -71
[ 431.144018] usb 3-1: new full speed USB device using uhci_hcd and address 17
[ 436.552516] usb 3-1: device not accepting address 17, error -71
[ 436.552538] hub 3-0:1.0: unable to enumerate USB device on port 1

αυτα ειναι τα αποτελεσματα της εντολης...

[xaris2335]

Για δοκίμασε

Κώδικας: Επιλογή όλων

sudo rmmod ehci_hcd
sudo modprobe ehci_hcd

[sean]

Κώδικας: Επιλογή όλων

john@john-desktop:~$ sudo rmmod ehci_hcd
[sudo] password for john:
ERROR: Module ehci_hcd does not exist in /proc/modules
john@john-desktop:~$ sudo modprobe ehci_hcd
FATAL: Module ehci_hcd not found.
john@john-desktop:~$



μου βγαζει αυτο...

[sean]

καμια βοηθεια???

[prov83]

Κοίτα bug #63556, https://lists.ubuntu.com/archives/kernel-bugs/2006-October/022131.html

[ 341.328019] usb 3-1: new full speed USB device using uhci_hcd and address 10
[ 346.448025] usb 3-1: device descriptor read/64, error -71
[ 351.672021] usb 3-1: device descriptor read/64, error -71
[ 351.888029] usb 3-1: new full speed USB device using uhci_hcd and address 11
[ 357.008040] usb 3-1: device descriptor read/64, error -71
[ 362.232019] usb 3-1: device descriptor read/64, error -71
[ 362.448020] usb 3-1: new full speed USB device using uhci_hcd and address 12
[ 367.856513] usb 3-1: device not accepting address 12, error -71
[ 367.968519] usb 3-1: new full speed USB device using uhci_hcd and address 13
[ 373.376531] usb 3-1: device not accepting address 13, error -71
[ 373.376554] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 404.468543] usb 3-1: new full speed USB device using uhci_hcd and address 14
[ 409.588021] usb 3-1: device descriptor read/64, error -71
[ 414.812019] usb 3-1: device descriptor read/64, error -71
[ 415.028027] usb 3-1: new full speed USB device using uhci_hcd and address 15
[ 420.148019] usb 3-1: device descriptor read/64, error -71
[ 425.380022] usb 3-1: device descriptor read/64, error -71
[ 425.596021] usb 3-1: new full speed USB device using uhci_hcd and address 16
[ 431.028819] usb 3-1: device not accepting address 16, error -71
[ 431.144018] usb 3-1: new full speed USB device using uhci_hcd and address 17
[ 436.552516] usb 3-1: device not accepting address 17, error -71
[ 436.552538] hub 3-0:1.0: unable to enumerate USB device on port 1

Aν παρατηρήσεις το πρόβλημα του είναι "ίδιο" με το δικό σου.
Άρα με δική σού ευθύνη και κατόπιν περαιτέρω αναζήτησης άνοιξε το terminal και δώσε:

Κώδικας: Επιλογή όλων

sudo su -

Κώδικας: Επιλογή όλων

echo Y > /sys/module/usbcore/parameters/old_scheme_first

Ελπίζω να πετύχει:P

[sean]

ty θα το δοκιμασω...

[xaris2335]

τελικά τι έγινε δούλεψε ?