Πρόβλημα σύνδεσης πληκτρολόγιου ps/2 σε θύρα usb

[XenosD]

Γειά σας,
έχω ένα παλιό PS/2 εξωτερικό πληκτρολόγιο και θέλω να το συνδέσω σε θύρα usb στο laptop. Προμηθεύτηκα λοιπόν έναν αντάπτορα "ps/2 σε usb" και έβαλα τον αντάπτορα στο πληκτρολόγιο.
Καθε φορά όμως που το σύνδεω στη usb, ανάβουν στιγμιαία τα λαμπάκια του πληκτρολογίου και αμέσως σβήνουν, και δεν λειτουργεί κανένα πλήκτρο.
Κοίταξα το Bios, αλλά δεν υπάρχει επιλογή usb legacy support ή usb keyboard.
Τo πληκτρολόγιο το δοκίμασα σε σταθερό υπολογιστή με Windows XP, και δουλεύει κανονικά.
Τι λέτε να φταίει;
Ευχαριστώ.

[Tetris]

Ειναι καθαρα θεμα controller (εσωτερικου) του πληκτρολογου.Δηλαδη τι chip χρησιμοποιει.Παντωs ολα τα NEW πληκτρολογια τηs αγοραs,ειναι απευθιαs USB (ακομα και των 8 ευρω) οποτε.....

[s.dalas]

θέλω να το συνδέσω σε θύρα usb στο laptop

Τo πληκτρολόγιο το δοκίμασα σε σταθερό υπολογιστή με Windows XP

εγώ πιστεύω οτι είναι θέμα οτι το συνδέεις στο laptop. εκεί κάπου μπερδεύεται με το κανονικό πληκτρολόγιο και με αυτό που πας να βάλεις...

[XenosD]

Μου φαίνεται ότι η λιγότερο χρονοβόρα λύση είναι να πάρω ένα κανονικό USB πληκτρολόγιο. Είναι σίγουρο ότι θα το αναγνωρίζει η μητρική μου;

[XenosD]

Έχει κανείς χρησιμοποιήσει το "Speedlink Silent Keystroke Keyboard" στο ubuntu; Θέλω να σιγουρευτώ ότι αυτό το usb πληκτρολόγιο είναι συμβατό, πριν το αγοράσω.
Ευχαριστώ.

[siopi]

Καθε φορά όμως που το σύνδεω στη usb, ανάβουν στιγμιαία τα λαμπάκια του πληκτρολογίου και αμέσως σβήνουν, και δεν λειτουργεί κανένα πλήκτρο.

Εννοείς ότι το συνδέεις αφού έχεις ανοίξει το pc?

[XenosD]

Εννοείς ότι το συνδέεις αφού έχεις ανοίξει το pc?

Το πρόβλημα παρουσιάζεται, και όταν συνδέω το πληκτρολόγιο αφού έχω ανοίξει τον υπολογιστή, αλλά και με κλειστό τον υπολογιστή.

Ούτως ή άλλως, αποφάσισα να πάρω και usb-πληκτρολόγιο.
Ξέρεις στο Ubuntu αναγνωρίζονται και λειτουργούν όλα γενικά τα μοντέλα usb-πληκτρολογίου;

[the_eye]

Δώσε μας το αποτέλεσμα της εντολής dmesg αφού το συνδέσεις.
Ακόμα δώσε και το αποτέλεσμα lsusb.
Σύvδεσε το πληκτρολόγιο πρώτα στον αντάπτορα και βάλε μετά τον αντάπτορα στο laptop.

[XenosD]

Το αποτέλεσμα της εντολής dmesg είναι:

Κώδικας: Επιλογή όλων

bill@ubuntu:~$
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-power+18-generic (buildd@papaya) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #24~lucid-Ubuntu SMP Tue Aug 24 18:53:40 UTC 2010 (Ubuntu 2.6.35-power+18.24~lucid-generic 2.6.35.3)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffa8000 (usable)
[ 0.000000] BIOS-e820: 000000007ffa8000 - 000000007ffb0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffbe000 - 0000000080000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7ffa8 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007ffa8000 (usable)
[ 0.000000] modified: 000000007ffa8000 - 000000007ffb0000 (ACPI NVS)
[ 0.000000] modified: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[ 0.000000] modified: 000000007ffbe000 - 0000000080000000 (ACPI NVS)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 377d1000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 00998000 - 011b6bfc
[ 0.000000] Move RAMDISK from 00000000377d1000 - 0000000037fefbfb to 00998000 - 011b6bfb
[ 0.000000] ACPI: RSDP 000f7b00 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7ffb0000 00040 (v01 _ASUS_ Notebook 05000723 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ffb0200 00084 (v02 AMI OEMFACP 05000723 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ffb05e0 08BAE (v01 F3J00 F3J00001 00000001 INTL 02002026)
[ 0.000000] ACPI: FACS 7ffbe000 00040
[ 0.000000] ACPI: APIC 7ffb0390 0005C (v01 AMI OEMAPIC 05000723 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ffb03f0 0003C (v01 AMI OEMMCFG 05000723 MSFT 00000097)
[ 0.000000] ACPI: BOOT 7ffb05b0 00028 (v01 AMI OEMBOOT 05000723 MSFT 00000097)
[ 0.000000] ACPI: SLIC 7ffb0430 00176 (v01 _ASUS_ Notebook 05000723 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ffbe040 00046 (v01 AMI AMI_OEM 05000723 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ffb9190 00038 (v01 AMI ASUS 05000723 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ffa8
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ffa8
[ 0.000000] On node 0 totalpages: 524087
[ 0.000000] free_area_init_node: node 0, pgdat c07f4dc0, node_mem_map c11b8200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294554 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s35904 r0 d21440 u2097152
[ 0.000000] pcpu-alloc: s35904 r0 d21440 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519991
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-power+18-generic root=UUID=a80d019e-c877-4f75-b6ce-55333633a84d ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10483680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (48 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 0000993a5c] TEXT DATA BSS
[ 0.000000] #3 [0000994000 - 00009971cd] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009fc00 - 00000fd0b0] BIOS reserved
[ 0.000000] #7 [00000fd22c - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000fd0b0 - 00000fd22c] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #11 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #12 [0000998000 - 00011b7000] NEW RAMDISK
[ 0.000000] #13 [00011b7000 - 00011b8000] BOOTMEM
[ 0.000000] #14 [00011b8000 - 00021b8000] BOOTMEM
[ 0.000000] #15 [00021b8000 - 00021b8004] BOOTMEM
[ 0.000000] #16 [00021b8040 - 00021b8100] BOOTMEM
[ 0.000000] #17 [00021b8100 - 00021b8154] BOOTMEM
[ 0.000000] #18 [00021b8180 - 00021bb180] BOOTMEM
[ 0.000000] #19 [00021bb180 - 00021bb1f0] BOOTMEM
[ 0.000000] #20 [00021bb200 - 00021c1200] BOOTMEM
[ 0.000000] #21 [00021c1200 - 00021c1225] BOOTMEM
[ 0.000000] #22 [00021c1240 - 00021c1267] BOOTMEM
[ 0.000000] #23 [00021c1280 - 00021c1398] BOOTMEM
[ 0.000000] #24 [00021c13c0 - 00021c1400] BOOTMEM
[ 0.000000] #25 [00021c1400 - 00021c1440] BOOTMEM
[ 0.000000] #26 [00021c1440 - 00021c1480] BOOTMEM
[ 0.000000] #27 [00021c1480 - 00021c14c0] BOOTMEM
[ 0.000000] #28 [00021c14c0 - 00021c1500] BOOTMEM
[ 0.000000] #29 [00021c1500 - 00021c1540] BOOTMEM
[ 0.000000] #30 [00021c1540 - 00021c1580] BOOTMEM
[ 0.000000] #31 [00021c1580 - 00021c15c0] BOOTMEM
[ 0.000000] #32 [00021c15c0 - 00021c1600] BOOTMEM
[ 0.000000] #33 [00021c1600 - 00021c1610] BOOTMEM
[ 0.000000] #34 [00021c1640 - 00021c16b0] BOOTMEM
[ 0.000000] #35 [00021c16c0 - 00021c1730] BOOTMEM
[ 0.000000] #36 [0002400000 - 000240e000] BOOTMEM
[ 0.000000] #37 [0002600000 - 000260e000] BOOTMEM
[ 0.000000] #38 [00021c3740 - 00021c3744] BOOTMEM
[ 0.000000] #39 [00021c3780 - 00021c3784] BOOTMEM
[ 0.000000] #40 [00021c37c0 - 00021c37c8] BOOTMEM
[ 0.000000] #41 [00021c3800 - 00021c3808] BOOTMEM
[ 0.000000] #42 [00021c3840 - 00021c38e8] BOOTMEM
[ 0.000000] #43 [00021c3900 - 00021c3968] BOOTMEM
[ 0.000000] #44 [00021c3980 - 00021c7980] BOOTMEM
[ 0.000000] #45 [00021c7980 - 0002247980] BOOTMEM
[ 0.000000] #46 [0002247980 - 0002287980] BOOTMEM
[ 0.000000] #47 [000260e000 - 000300d7e0] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffa8)
[ 0.000000] Memory: 2051640k/2096800k available (4900k kernel code, 44708k reserved, 2321k data, 684k init, 1187496k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc080e000 - 0xc08b9000 ( 684 kB)
[ 0.000000] .data : 0xc05c922e - 0xc080d6a8 (2321 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05c922e (4900 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.074 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.14 BogoMIPS (lpj=7980296)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004031] Security Framework initialized
[ 0.004050] AppArmor: AppArmor initialized
[ 0.004052] Yama: becoming mindful.
[ 0.004112] Mount-cache hash table entries: 512
[ 0.004260] Initializing cgroup subsys ns
[ 0.004265] Initializing cgroup subsys cpuacct
[ 0.004271] Initializing cgroup subsys memory
[ 0.004280] Initializing cgroup subsys devices
[ 0.004283] Initializing cgroup subsys freezer
[ 0.004286] Initializing cgroup subsys net_cls
[ 0.004316] CPU: Physical Processor ID: 0
[ 0.004318] CPU: Processor Core ID: 0
[ 0.004322] mce: CPU supports 6 MCE banks
[ 0.004331] CPU0: Thermal monitoring handled by SMI
[ 0.004335] using mwait in idle threads.
[ 0.004343] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.004350] PEBS disabled due to CPU errata.
[ 0.004358] ... version: 2
[ 0.004360] ... bit width: 40
[ 0.004362] ... generic registers: 2
[ 0.004364] ... value mask: 000000ffffffffff
[ 0.004366] ... max period: 000000007fffffff
[ 0.004368] ... fixed-purpose events: 3
[ 0.004370] ... event mask: 0000000700000003
[ 0.010376] ACPI: Core revision 20100428
[ 0.024010] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.024015] ftrace: allocating 21684 entries in 43 pages
[ 0.028049] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028429] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069064] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 0.072000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.160016] Brought up 2 CPUs
[ 0.160020] Total of 2 processors activated (7980.18 BogoMIPS).
[ 0.160741] devtmpfs: initialized
[ 0.161023] regulator: core version 0.5
[ 0.161056] Time: 11:46:46 Date: 09/26/10
[ 0.161099] NET: Registered protocol family 16
[ 0.161125] Trying to unpack rootfs image as initramfs...
[ 0.161239] EISA bus registered
[ 0.161248] ACPI: bus type pci registered
[ 0.161331] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.161334] PCI: not using MMCONFIG
[ 0.161556] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 0.161558] PCI: Using configuration type 1 for base access
[ 0.168216] bio: create slab <bio-0> at 0
[ 0.170388] ACPI: EC: Look up EC in DSDT
[ 0.173918] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.192658] ACPI: SSDT 7ffb91d0 00D24 (v01 AMI CPU1PM 00000001 INTL 02002026)
[ 0.193523] ACPI: Dynamic OEM Table Load:
[ 0.193523] ACPI: SSDT (null) 00D24 (v01 AMI CPU1PM 00000001 INTL 02002026)
[ 0.193523] ACPI Warning: Incorrect checksum in table [SSDT] - 0x4C, should be 0x8F (20100428/tbutils-314)
[ 0.193523] ACPI: SSDT 7ffb9f00 00D24 (v01 AMI CPU2PM 00000001 INTL 02002026)
[ 0.193949] ACPI: Dynamic OEM Table Load:
[ 0.193953] ACPI: SSDT (null) 00D24 (v01 AMI CPU2PM 00000001 INTL 02002026)
[ 0.194036] ACPI: Interpreter enabled
[ 0.194042] ACPI: (supports S0 S3 S4 S5)
[ 0.194072] ACPI: Using IOAPIC for interrupt routing
[ 0.194141] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.200152] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.200157] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
[ 0.200159] PCI: Using MMCONFIG for extended config space
[ 0.210353] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.210428] ACPI Warning: Incorrect checksum in table [SSDT] - 0x4C, should be 0x8F (20100428/tbutils-314)
[ 0.210622] ACPI: No dock devices found.
[ 0.210628] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.210778] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.211061] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.211064] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.211067] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.211070] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.211073] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.211174] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.211178] pci 0000:00:01.0: PME# disabled
[ 0.211265] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
[ 0.211330] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.211335] pci 0000:00:1b.0: PME# disabled
[ 0.211440] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.211445] pci 0000:00:1c.0: PME# disabled
[ 0.211554] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.211559] pci 0000:00:1c.1: PME# disabled
[ 0.211667] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.211672] pci 0000:00:1c.2: PME# disabled
[ 0.211743] pci 0000:00:1d.0: reg 20: [io 0xec00-0xec1f]
[ 0.211811] pci 0000:00:1d.1: reg 20: [io 0xe880-0xe89f]
[ 0.211878] pci 0000:00:1d.2: reg 20: [io 0xe800-0xe81f]
[ 0.211946] pci 0000:00:1d.3: reg 20: [io 0xe480-0xe49f]
[ 0.212018] pci 0000:00:1d.7: reg 10: [mem 0xfebfbc00-0xfebfbfff]
[ 0.212087] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.212093] pci 0000:00:1d.7: PME# disabled
[ 0.212266] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.212271] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.212281] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
[ 0.212349] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.212357] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.212366] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.212374] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.212383] pci 0000:00:1f.2: reg 20: [io 0xffa0-0xffaf]
[ 0.212421] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.212426] pci 0000:00:1f.2: PME# disabled
[ 0.212490] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.212604] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.212615] pci 0000:01:00.0: reg 14: [io 0xb000-0xb0ff]
[ 0.212626] pci 0000:01:00.0: reg 18: [mem 0xfdff0000-0xfdffffff]
[ 0.212661] pci 0000:01:00.0: reg 30: [mem 0xfdfc0000-0xfdfdffff pref]
[ 0.212726] pci 0000:01:00.0: supports D1 D2
[ 0.212747] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.212760] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.212764] pci 0000:00:01.0: bridge window [io 0x9000-0xbfff]
[ 0.212768] pci 0000:00:01.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.212774] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref]
[ 0.212885] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff]
[ 0.212916] pci 0000:02:00.0: reg 18: [mem 0xfe0ff000-0xfe0fffff 64bit]
[ 0.212946] pci 0000:02:00.0: reg 30: [mem 0xfe0e0000-0xfe0effff pref]
[ 0.213013] pci 0000:02:00.0: supports D1 D2
[ 0.213015] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.213022] pci 0000:02:00.0: PME# disabled
[ 0.213054] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.213068] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.213074] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.213080] pci 0000:00:1c.0: bridge window [mem 0xfe000000-0xfe0fffff]
[ 0.213089] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.213293] pci 0000:03:00.0: reg 10: [mem 0xfe1ff000-0xfe1fffff]
[ 0.213542] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.213555] pci 0000:03:00.0: PME# disabled
[ 0.213627] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.213656] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.213662] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.213668] pci 0000:00:1c.1: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.213677] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.213742] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.213747] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.213753] pci 0000:00:1c.2: bridge window [mem 0xfe200000-0xfe9fffff]
[ 0.213762] pci 0000:00:1c.2: bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
[ 0.213827] pci 0000:06:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.213829] pci 0000:06:01.0: MMC cards are now supported by standard SDHCI controller
[ 0.213842] pci 0000:06:01.0: reg 10: [mem 0xfeaff800-0xfeafffff]
[ 0.213908] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
[ 0.213913] pci 0000:06:01.0: PME# disabled
[ 0.213953] pci 0000:06:01.1: reg 10: [mem 0xfeaff400-0xfeaff4ff]
[ 0.214017] pci 0000:06:01.1: supports D1 D2
[ 0.214019] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214024] pci 0000:06:01.1: PME# disabled
[ 0.214063] pci 0000:06:01.2: reg 10: [mem 0xfeaff000-0xfeaff0ff]
[ 0.214128] pci 0000:06:01.2: supports D1 D2
[ 0.214130] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214135] pci 0000:06:01.2: PME# disabled
[ 0.214175] pci 0000:06:01.3: reg 10: [mem 0xfeafec00-0xfeafecff]
[ 0.214237] pci 0000:06:01.3: supports D1 D2
[ 0.214240] pci 0000:06:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214245] pci 0000:06:01.3: PME# disabled
[ 0.214322] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.214327] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.214333] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.214342] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.214345] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.214348] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.214379] pci_bus 0000:00: on NUMA node 0
[ 0.214385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.214619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.214697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.214795] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.214875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.214966] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.228423] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 0.228570] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
[ 0.228713] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
[ 0.228856] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
[ 0.228998] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.229142] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.229286] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.229430] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
[ 0.229493] HEST: Table is not found!
[ 0.229580] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.229588] vgaarb: loaded
[ 0.229784] SCSI subsystem initialized
[ 0.229867] libata version 3.00 loaded.
[ 0.229925] usbcore: registered new interface driver usbfs
[ 0.229939] usbcore: registered new interface driver hub
[ 0.229963] usbcore: registered new device driver usb
[ 0.230113] ACPI: WMI: Mapper loaded
[ 0.230115] PCI: Using ACPI for IRQ routing
[ 0.230164] PCI: pci_cache_line_size set to 64 bytes
[ 0.230288] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.230291] reserve RAM buffer: 000000007ffa8000 - 000000007fffffff
[ 0.230391] NetLabel: Initializing
[ 0.230394] NetLabel: domain hash size = 128
[ 0.230395] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.230411] NetLabel: unlabeled traffic allowed by default
[ 0.230447] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.230455] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.230461] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.236054] Switching to clocksource tsc
[ 0.248429] AppArmor: AppArmor Filesystem Enabled
[ 0.248452] pnp: PnP ACPI init
[ 0.248472] ACPI: bus type pnp registered
[ 0.251034] pnp: PnP ACPI: found 13 devices
[ 0.251037] ACPI: ACPI bus type pnp unregistered
[ 0.251041] PnPBIOS: Disabled by ACPI PNP
[ 0.251055] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.251066] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.251069] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.251072] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.251075] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.251079] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.251082] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.251085] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.251089] system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved
[ 0.251092] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.251098] system 00:0a: [io 0x0250-0x0253] has been reserved
[ 0.251101] system 00:0a: [io 0x0256-0x025f] has been reserved
[ 0.251105] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.251108] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.251111] system 00:0a: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.251114] system 00:0a: [mem 0xfec18000-0xfec1ffff] has been reserved
[ 0.251117] system 00:0a: [mem 0xfec20000-0xfec27fff] has been reserved
[ 0.251123] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.251130] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.251133] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.251136] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.251139] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.285943] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.285948] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.285953] pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.285956] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.285959] pci 0000:00:01.0: bridge window [io 0x9000-0xbfff]
[ 0.285964] pci 0000:00:01.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.285968] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref]
[ 0.285974] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.285977] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.285984] pci 0000:00:1c.0: bridge window [mem 0xfe000000-0xfe0fffff]
[ 0.285990] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.285999] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.286003] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.286010] pci 0000:00:1c.1: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.286015] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.286024] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.286028] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.286035] pci 0000:00:1c.2: bridge window [mem 0xfe200000-0xfe9fffff]
[ 0.286041] pci 0000:00:1c.2: bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
[ 0.286051] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.286053] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.286060] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.286065] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.286087] alloc irq_desc for 16 on node -1
[ 0.286090] alloc kstat_irqs on node -1
[ 0.286099] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.286103] pci 0000:00:01.0: setting latency timer to 64
[ 0.286115] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.286121] pci 0000:00:1c.0: setting latency timer to 64
[ 0.286133] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.286137] alloc irq_desc for 17 on node -1
[ 0.286139] alloc kstat_irqs on node -1
[ 0.286144] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.286149] pci 0000:00:1c.1: setting latency timer to 64
[ 0.286161] alloc irq_desc for 18 on node -1
[ 0.286163] alloc kstat_irqs on node -1
[ 0.286167] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.286172] pci 0000:00:1c.2: setting latency timer to 64
[ 0.286182] pci 0000:00:1e.0: setting latency timer to 64
[ 0.286188] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.286191] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.286193] pci_bus 0000:01: resource 0 [io 0x9000-0xbfff]
[ 0.286196] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.286199] pci_bus 0000:01: resource 2 [mem 0xbdf00000-0xddefffff 64bit pref]
[ 0.286202] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.286204] pci_bus 0000:02: resource 1 [mem 0xfe000000-0xfe0fffff]
[ 0.286207] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.286210] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.286213] pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.286215] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.286218] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.286221] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe9fffff]
[ 0.286224] pci_bus 0000:04: resource 2 [mem 0xddf00000-0xdfefffff 64bit pref]
[ 0.286226] pci_bus 0000:06: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.286229] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.286232] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[ 0.286277] NET: Registered protocol family 2
[ 0.286361] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.286655] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.287205] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.287492] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.287495] TCP reno registered
[ 0.287499] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.287510] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.287603] NET: Registered protocol family 1
[ 0.287767] pci 0000:01:00.0: Boot video device
[ 0.287793] PCI: CLS 32 bytes, default 64
[ 0.287822] Simple Boot Flag at 0x52 set to 0x1
[ 0.288027] cpufreq-nforce2: No nForce2 chipset.
[ 0.288058] Scanning for low memory corruption every 60 seconds
[ 0.288178] audit: initializing netlink socket (disabled)
[ 0.288190] type=2000 audit(1285501606.284:1): initialized
[ 0.299301] highmem bounce pool size: 64 pages
[ 0.299308] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.300938] VFS: Disk quotas dquot_6.5.2
[ 0.301007] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.301632] fuse init (API version 7.14)
[ 0.301728] msgmni has been set to 1687
[ 0.302024] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.302027] io scheduler noop registered
[ 0.302030] io scheduler deadline registered
[ 0.302044] io scheduler cfq registered (default)
[ 0.302175] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.302206] alloc irq_desc for 40 on node -1
[ 0.302208] alloc kstat_irqs on node -1
[ 0.302218] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.302284] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.302332] alloc irq_desc for 41 on node -1
[ 0.302335] alloc kstat_irqs on node -1
[ 0.302344] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.302446] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.302495] alloc irq_desc for 42 on node -1
[ 0.302497] alloc kstat_irqs on node -1
[ 0.302506] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.302613] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.302661] alloc irq_desc for 43 on node -1
[ 0.302664] alloc kstat_irqs on node -1
[ 0.302673] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.302795] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.302934] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.303196] ACPI: AC Adapter [AC0] (on-line)
[ 0.303284] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.304545] ACPI: Lid Switch [LID]
[ 0.304602] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.304611] ACPI: Power Button [PWRB]
[ 0.304660] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.304663] ACPI: Sleep Button [SLPB]
[ 0.304708] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.304711] ACPI: Power Button [PWRF]
[ 0.305067] ACPI: acpi_idle registered with cpuidle
[ 0.305391] Marking TSC unstable due to TSC halts in idle
[ 0.308762] Switching to clocksource hpet
[ 0.311298] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.311307] ACPI: Thermal Zone [THRM] (44 C)
[ 0.311393] ERST: Table is not found!
[ 0.312912] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.314605] brd: module loaded
[ 0.315184] loop: module loaded
[ 0.315374] ata_piix 0000:00:1f.2: version 2.13
[ 0.315395] alloc irq_desc for 19 on node -1
[ 0.315397] alloc kstat_irqs on node -1
[ 0.315405] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.315411] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.315456] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.315608] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.315618] isapnp: Scanning for PnP cards...
[ 0.364716] scsi0 : ata_piix
[ 0.390507] Freeing initrd memory: 8316k freed
[ 0.395043] scsi1 : ata_piix
[ 0.396711] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.396715] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.397107] Fixed MDIO Bus: probed
[ 0.397146] PPP generic driver version 2.4.2
[ 0.397240] tun: Universal TUN/TAP device driver, 1.6
[ 0.397242] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.397347] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.397379] alloc irq_desc for 23 on node -1
[ 0.397382] alloc kstat_irqs on node -1
[ 0.397392] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.397419] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.397424] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.397459] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.397484] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.397497] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.401381] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.401404] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00
[ 0.416017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.416161] hub 1-0:1.0: USB hub found
[ 0.416167] hub 1-0:1.0: 8 ports detected
[ 0.416260] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.416280] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.416326] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.416334] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.416338] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.416372] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.416400] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ec00
[ 0.416525] hub 2-0:1.0: USB hub found
[ 0.416532] hub 2-0:1.0: 2 ports detected
[ 0.416603] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.416610] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.416614] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.416647] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.416685] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
[ 0.416809] hub 3-0:1.0: USB hub found
[ 0.416814] hub 3-0:1.0: 2 ports detected
[ 0.416877] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.416884] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.416888] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.416921] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.416958] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 0.417088] hub 4-0:1.0: USB hub found
[ 0.417093] hub 4-0:1.0: 2 ports detected
[ 0.417162] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.417169] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.417173] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.417216] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.417254] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e480
[ 0.417377] hub 5-0:1.0: USB hub found
[ 0.417382] hub 5-0:1.0: 2 ports detected
[ 0.417533] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.419436] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.421442] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.421448] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.421475] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.421498] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.421521] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.421623] mice: PS/2 mouse device common for all mice
[ 0.421812] rtc_cmos 00:03: RTC can wake from S4
[ 0.421855] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.421887] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.422004] device-mapper: uevent: version 1.0.3
[ 0.422127] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.422193] device-mapper: multipath: version 1.1.1 loaded
[ 0.422196] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.422313] EISA: Probing bus 0 at eisa.0
[ 0.422320] Cannot allocate resource for EISA slot 1
[ 0.422349] EISA: Detected 0 cards.
[ 0.422478] cpuidle: using governor ladder
[ 0.422568] cpuidle: using governor menu
[ 0.422913] TCP cubic registered
[ 0.423056] NET: Registered protocol family 10
[ 0.423464] lo: Disabled Privacy Extensions
[ 0.423731] NET: Registered protocol family 17
[ 0.437722] Using IPI No-Shortcut mode
[ 0.437801] PM: Resume from disk failed.
[ 0.437815] registered taskstats version 1
[ 0.438199] Magic number: 10:374:783
[ 0.438301] rtc_cmos 00:03: setting system clock to 2010-09-26 11:46:46 UTC (1285501606)
[ 0.438304] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.438306] EDD information not available.
[ 0.454479] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.569756] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.21, max UDMA/33
[ 0.585468] ata2.00: configured for UDMA/33
[ 0.600615] ata1.00: ATA-8: WDC WD3200BEKT-00F3T0, 11.01A11, max UDMA/133
[ 0.600619] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.605372] ata1.00: configured for UDMA/133
[ 0.669564] isapnp: No Plug & Play device found
[ 0.669735] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-0 11.0 PQ: 0 ANSI: 5
[ 0.669859] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.669868] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.669915] sd 0:0:0:0: [sda] Write Protect is off
[ 0.669919] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.670040] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.670198] sda:
[ 0.671798] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.21 PQ: 0 ANSI: 5
[ 0.676417] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.676423] Uniform CD-ROM driver Revision: 3.20
[ 0.676594] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.676693] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.678056] sda1 sda2 < sda5 sda6 > sda3 sda4
[ 0.691787] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.691816] Freeing unused kernel memory: 684k freed
[ 0.692246] Write protecting the kernel text: 4904k
[ 0.692300] Write protecting the kernel read-only data: 1968k
[ 0.709553] udev: starting version 151
[ 0.785056] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 0.804696] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.804725] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.804784] r8169 0000:02:00.0: setting latency timer to 64
[ 0.804865] alloc irq_desc for 44 on node -1
[ 0.804868] alloc kstat_irqs on node -1
[ 0.804888] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 0.805657] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf8032000, 00:1a:92:6d:c7:d9, XID 18000000 IRQ 44
[ 0.854315] ohci1394 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.911076] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 1.157069] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.208293] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.184560] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003813a99]
[ 12.660666] udev: starting version 151
[ 12.667275] Adding 3097596k swap on /dev/sda6. Priority:-1 extents:1 across:3097596k
[ 12.778001] lp: driver loaded but no devices found
[ 12.804763] intel_rng: FWH not detected
[ 12.804924] Linux agpgart interface v0.103
[ 12.815988] leds_ss4200: no LED devices found
[ 12.886200] sdhci: Secure Digital Host Controller Interface driver
[ 12.886203] sdhci: Copyright(c) Pierre Ossman
[ 12.887706] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 19)
[ 12.887726] sdhci-pci 0000:06:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.888747] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 12.915639] Registered led device: mmc0::
[ 12.916735] mmc0: SDHCI controller on PCI [0000:06:01.1] using DMA
[ 12.921531] Linux video capture interface: v2.00
[ 12.923691] stkwebcam: Syntek USB2.0 Camera is now controlling device video0
[ 12.923710] usbcore: registered new interface driver stkwebcam
[ 12.942225] asus_laptop: Asus Laptop Support version 0.42
[ 12.946068] asus_laptop: F3JP model detected
[ 13.033420] asus_laptop: Backlight controlled by ACPI video driver
[ 13.033515] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
[ 13.035136] cfg80211: Calling CRDA to update world regulatory domain
[ 13.037941] acpi device:17: registered as cooling_device2
[ 13.038200] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input6
[ 13.038249] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 13.044805] usbcore: registered new interface driver hiddev
[ 13.045805] Registered led device: asus::touchpad
[ 13.063254] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7
[ 13.063381] generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 13.063404] usbcore: registered new interface driver usbhid
[ 13.063406] usbhid: USB HID core driver
[ 13.065392] AppArmor DFA next/check upper bounds error fixed, upgrade user space tools
[ 13.065441] type=1400 audit(1285490819.121:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=643 comm="apparmor_parser"
[ 13.066126] AppArmor DFA next/check upper bounds error fixed, upgrade user space tools
[ 13.066152] type=1400 audit(1285490819.121:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=643 comm="apparmor_parser"
[ 13.066508] AppArmor DFA next/check upper bounds error fixed, upgrade user space tools
[ 13.066534] type=1400 audit(1285490819.121:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=643 comm="apparmor_parser"
[ 13.069875] [drm] Initialized drm 1.1.0 20060810
[ 13.086387] coretemp coretemp.0: TjMax is assumed as 100 C!
[ 13.086436] coretemp coretemp.1: TjMax is assumed as 100 C!
[ 13.100843] cfg80211: World regulatory domain updated:
[ 13.100847] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.100850] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.100853] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.100856] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.100859] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.100862] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.156946] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 13.156950] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 13.157045] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.157060] iwl3945 0000:03:00.0: setting latency timer to 64
[ 13.182698] [drm] radeon kernel modesetting enabled.
[ 13.182778] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.182788] radeon 0000:01:00.0: setting latency timer to 64
[ 13.184126] [drm] initializing kernel modesetting (RV530 0x1002:0x71D5).
[ 13.199489] [drm] register mmio base: 0xFDFF0000
[ 13.199492] [drm] register mmio size: 65536
[ 13.199655] ATOM BIOS: ASUS
[ 13.199698] [drm] Generation 2 PCI interface, using max accessible memory
[ 13.199704] radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 13.199707] radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 13.199835] alloc irq_desc for 45 on node -1
[ 13.199838] alloc kstat_irqs on node -1
[ 13.199850] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 13.199859] [drm] radeon: using MSI.
[ 13.199891] [drm] radeon: irq initialized.
[ 13.211684] [drm] Detected VRAM RAM=256M, BAR=256M
[ 13.211688] [drm] RAM width 128bits DDR
[ 13.211762] [TTM] Zone kernel: Available graphics memory: 436572 kiB.
[ 13.211764] [TTM] Zone highmem: Available graphics memory: 1030320 kiB.
[ 13.211767] [TTM] Initializing pool allocator.
[ 13.211789] [drm] radeon: 256M of VRAM memory ready
[ 13.211791] [drm] radeon: 512M of GTT memory ready.
[ 13.211823] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.213358] [drm] radeon: 1 quad pipes, 2 z pipes initialized.
[ 13.214782] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 13.215445] [drm] Loading R500 Microcode
[ 13.219858] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 13.219863] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 13.219995] alloc irq_desc for 46 on node -1
[ 13.219997] alloc kstat_irqs on node -1
[ 13.220034] iwl3945 0000:03:00.0: irq 46 for MSI/MSI-X
[ 13.229980] [drm] radeon: ring at 0x0000000010000000
[ 13.230015] [drm] ring test succeeded in 9 usecs
[ 13.230204] [drm] radeon: ib pool ready.
[ 13.230298] [drm] ib test succeeded in 0 usecs
[ 13.230341] [drm] Default TV standard: PAL
[ 13.230346] [drm] Default TV standard: PAL
[ 13.230482] [drm] Default TV standard: PAL
[ 13.230560] [drm] Radeon Display Connectors
[ 13.230562] [drm] Connector 0:
[ 13.230563] [drm] VGA
[ 13.230566] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 13.230568] [drm] Encoders:
[ 13.230570] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 13.230572] [drm] Connector 1:
[ 13.230574] [drm] LVDS
[ 13.230576] [drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
[ 13.230578] [drm] Encoders:
[ 13.230580] [drm] LCD1: INTERNAL_LVTM1
[ 13.230582] [drm] Connector 2:
[ 13.230583] [drm] S-video
[ 13.230585] [drm] Encoders:
[ 13.230586] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 13.230588] [drm] Connector 3:
[ 13.230590] [drm] DVI-I
[ 13.230591] [drm] HPD1
[ 13.230594] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 13.230596] [drm] Encoders:
[ 13.230598] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 13.236761] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 13.274087] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.274145] alloc irq_desc for 47 on node -1
[ 13.274148] alloc kstat_irqs on node -1
[ 13.274162] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 13.274202] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.289322] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 13.313707] [drm] radeon: power management initialized
[ 13.321764] hda_codec: ALC660-VD: BIOS auto-probing.
[ 13.694649] [drm] fb mappable at 0xC00C0000
[ 13.694652] [drm] vram apper at 0xC0000000
[ 13.694655] [drm] size 4096000
[ 13.694656] [drm] fb depth is 24
[ 13.694658] [drm] pitch is 5120
[ 13.769761] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0
[ 13.810556] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 14.113302] Console: switching to colour frame buffer device 160x50
[ 14.117230] fb0: radeondrmfb frame buffer device
[ 14.117232] drm: registered panic notifier
[ 14.117236] Slow work thread pool: Starting up
[ 14.117284] Slow work thread pool: Ready
[ 14.117291] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
[ 14.331443] r8169 0000:02:00.0: eth0: link down
[ 14.331758] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.342359] AppArmor DFA next/check upper bounds error fixed, upgrade user space tools
[ 14.342396] type=1400 audit(1285490820.401:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=914 comm="apparmor_parser"
[ 14.344328] AppArmor DFA next/check upper bounds error fixed, upgrade user space tools
[ 14.344373] type=1400 audit(1285490820.401:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=939 comm="apparmor_parser"
[ 14.345056] AppArmor DFA next/check upper bounds error fixed, upgrade user space tools
[ 14.345083] type=1400 audit(1285490820.405:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=939 comm="apparmor_parser"
[ 14.345442] AppArmor DFA next/check upper bounds error fixed, upgrade user space tools
[ 14.345468] type=1400 audit(1285490820.405:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=939 comm="apparmor_parser"
[ 14.348654] AppArmor DFA next/check upper bounds error fixed, upgrade user space tools
[ 14.349057] type=1400 audit(1285490820.409:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=940 comm="apparmor_parser"
[ 14.357789] AppArmor DFA next/check upper bounds error fixed, upgrade user space tools
[ 14.358022] type=1400 audit(1285490820.417:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=940 comm="apparmor_parser"
[ 14.363451] AppArmor DFA next/check upper bounds error fixed, upgrade user space tools
[ 14.363680] type=1400 audit(1285490820.421:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=940 comm="apparmor_parser"
[ 14.371483] AppArmor DFA next/check upper bounds error fixed, upgrade user space tools
[ 14.372316] AppArmor DFA next/check upper bounds error fixed, upgrade user space tools
[ 14.374714] AppArmor DFA next/check upper bounds error fixed, upgrade user space tools
[ 14.653711] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 14.653854] iwl3945 0000:03:00.0: Radio disabled by HW RF Kill switch
[ 14.760697] iwl3945 0000:03:00.0: Radio disabled by HW RF Kill switch
[ 15.053767] ppdev: user-space parallel port driver
[ 579.028075] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 579.236588] usb 1-2: applying rev.C fixup
[ 579.244206] usb 1-2: applying rev.C fixup
[ 579.254025] MOSCHIP usb-ethernet driver 1-2:1.0: eth1: register 'MOSCHIP usb-ethernet driver' at usb-0000:00:1d.7-2, MOSCHIP 7830/7730 usb-NET adapter, 00:13:3b:00:00:51
[ 579.254146] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 579.279564] mcs7830_async_cmd_callback() failed with -32
[ 589.464037] eth1: no IPv6 routers present
[ 1627.070666] ptrace of non-child pid 2201 was attempted by: firefox-bin (pid 2505)
[ 1627.070676] ptrace of non-child pid 2204 was attempted by: firefox-bin (pid 2505)
[ 1627.070684] ptrace of non-child pid 2205 was attempted by: firefox-bin (pid 2505)
[ 1627.070692] ptrace of non-child pid 2211 was attempted by: firefox-bin (pid 2505)
[ 1627.070699] ptrace of non-child pid 2235 was attempted by: firefox-bin (pid 2505)
[ 2079.976130] usb 1-4: new high speed USB device using ehci_hcd and address 5
[ 2080.108751] hub 1-4:1.0: USB hub found
[ 2080.108934] hub 1-4:1.0: 4 ports detected
[ 2080.396200] usb 1-4.1: new high speed USB device using ehci_hcd and address 6
[ 2080.540397] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10CA
[ 2080.540721] usbcore: registered new interface driver usblp
[ 2081.632173] usb 1-4.1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 3050.120324] usb 1-4.1: USB disconnect, address 6
[ 3050.120514] usblp0: removed
[ 4186.316174] usb 1-4.1: new high speed USB device using ehci_hcd and address 7
[ 4186.426516] usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10CA
[ 4187.587430] usb 1-4.1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 4436.097726] usb 1-4.1: USB disconnect, address 7
[ 4436.097925] usblp0: removed
[ 4488.054445] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 4937.229642] usb 1-2: USB disconnect, address 4
[ 4937.229965] MOSCHIP usb-ethernet driver 1-2:1.0: eth1: unregister 'MOSCHIP usb-ethernet driver' usb-0000:00:1d.7-2, MOSCHIP 7830/7730 usb-NET adapter
[ 4949.483788] usb 1-4: USB disconnect, address 5

Το αποτέλεσμα της εντολής lsusb είναι:

Κώδικας: Επιλογή όλων

bill@ubuntu:~$
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 05e1:0501 Syntek Semiconductor Co., Ltd DC-1125 Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Δυστυχώς οι 2 εντολές έδωσαν τα ίδια αποτελέσματα και με αποσυνδεδεμένο τον αντάπτορα.

[the_eye]

Τον αντάπτορα τον βάζεις σε κάποιο usb hub μαζί με εκτυπωτή Webcam και άλλα ;