Πρόβλημα με εκτυπωτή

[elefher]

Όταν δίνω sudo hp-setup μου δίνει

Κώδικας: Επιλογή όλων

Traceback (most recent call last):
File "/usr/bin/hp-setup", line 45, in <module>
from base import device, utils, tui, models, module
File "/usr/share/hplip/base/device.py", line 37, in <module>
import status
File "/usr/share/hplip/base/status.py", line 40, in <module>
import hpmudext
ImportError: libhpmud.so.0: cannot open shared object file: No such file or directory


Έψαξα λίγο στο google αλλά δε μπόρεσα να βρώ λύση

[elefher]

Τελικά έκανα επανεγκατάσταση το libhpmud.so και δούλεψε το hp-setup αλλά και πάλι δε βρίσκει τον εκτυπωτή

[medigeek]

αλλά και πάλι δε βρίσκει τον εκτυπωτή

Εννοείς δε βρίσκει τον εκτυπωτή στο firefox;

Δοκίμασε και τα βήματα 8 και 9 όταν βρεις χρόνο.

[elefher]

Φίλε μου και στον καινούργιο user που έφτιαξα δε τον βρίσκει έτσι σου παραθέτω τα αποτελέσματα από τις εντολές

Κώδικας: Επιλογή όλων


hp-check
HP Linux Imaging and Printing System (ver. 3.10.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux lefteris 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 i686 GNU/Linux

Distribution:
ubuntu 10.04

Checking Python version...
OK, version 2.6.5 installed

Checking PyQt 4.x version...
OK, version 4.7.2 installed.

Checking for CUPS...
Status: scheduler is running
Version: 1.4.3
error_log is set to level: debug

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.10.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.10.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.2rc1.9
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0



Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name =
working_dir = .
device_uri = "hp:/usb/Photosmart_B109a-m?serial=CN063GD5TV05C7"

[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[installation]
version = 3.10.2rc1.9
date_time = 18/10/2010 01:34:18

[settings]
systray_messages = 0
systray_visible = 0

[fax]
email_address =
voice_phone =

[refresh]
rate = 30
enable = true
type = 1

[polling]
enable = false
device_list =
interval = 5



--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------


lpstat
------
Type: Unknown
Device URI: No destinations added.


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.



-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x7a11 at 001:002:
Device URI: hp:/usb/Photosmart_B109a-m?serial=CN063GD5TV05C7

HP Linux Imaging and Printing System (ver. 3.10.2)
System Tray Status Service ver. 2.0

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

/usr/lib/pymodules/python2.6/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK
set_interactive(1)
error: Unsupported model: Photosmart_B109a-m

---------------
| USER GROUPS |
---------------

lefteris adm lp dialout cdrom plugdev lpadmin admin sambashare

User member of group 'lp'. Enables print/ scan/ fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

No errors or warnings.

Done.


Κώδικας: Επιλογή όλων

hp-probe

HP Linux Imaging and Printing System (ver. 3.10.2)
Printer Discovery Utility ver. 4.1

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------

Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
2 par Parallel Port (LPT:)

Enter number 0...2 for connection type (q=quit, enter=usb*) ? 0

Using connection type: usb


--------------------
| DEVICE DISCOVERY |
--------------------

warning: No devices found on the 'usb' bus. If this isn't the result you are expecting,
warning: check to make sure your devices are properly connected and powered on.

Done.


Κώδικας: Επιλογή όλων

sudo hp-probe
[sudo] password for lefteris:
warning: hp-probe should not be run as root/superuser.

HP Linux Imaging and Printing System (ver. 3.10.2)
Printer Discovery Utility ver. 4.1

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------

Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
2 par Parallel Port (LPT:)

Enter number 0...2 for connection type (q=quit, enter=usb*) ? 0

Using connection type: usb


--------------------
| DEVICE DISCOVERY |
--------------------

warning: No devices found on the 'usb' bus. If this isn't the result you are expecting,
warning: check to make sure your devices are properly connected and powered on.

Done.


[elefher]

Δε βρίσκω τον εκτυπωτή ούτε στο hplip

[medigeek]

Φαίνεται πως η απεγκατάσταση «πήρε» κι άλλα αρχεια. Παραμένω θετικός και πιστεύω πως έμειναν ακόμη δυο πακέτα για επανεγκατάσταση.

https://answers.launchpad.net/hplip/+question/104400
https://answers.launchpad.net/hplip/+question/104454
Έχετε παρόμοιο πρόβλημα (βλέποντας το log).

Για να δοκιμάσουμε:
1. Το πρώτο που πρέπει να κάνεις είναι να επανεγκαταστήσεις τα πακέτα hpijs-ppds και hpijs:

Κώδικας: Επιλογή όλων

sudo dpkg -P --force-all hpijs hpijs-ppds
sudo apt-get install hpijs hpijs-ppds
sudo apt-get -f install

2. Επανεκκίνησε τον υπολογιστή.

3. Διέγραψε τον υπολογιστή εκτυπωτή και τις ρυθμίσεις με τις εντολές:

Κώδικας: Επιλογή όλων

sudo hp-setup -r
sudo rm ~/.hplip/hplip.conf


4. Εκτελείς:

Κώδικας: Επιλογή όλων

gksu gedit /usr/share/hplip/data/models/models.dat

replace photosmart_b109a_series with photosmart_b109a-m
scanning should work now using xsane.

Αντικαθιστάς τη λέξη "photosmart_b109a_series" με: photosmart_b109a-m

Φύλαξε το αρχείο.

5. (Άναψε τον εκτυπωτή)
Επανεγκατέστησε τον εκτυπωτή:

Κώδικας: Επιλογή όλων

sudo hp-setup

Ελπίζω να μπορείς να το εγκαταστήσεις τώρα.

6. Log out / Log in. Αν δούλεψε το βήμα (5) και βρίσκει τον εκτυπωτή, τρέξε το firefox με safe mode:

Κώδικας: Επιλογή όλων

firefox -safe-mode

[elefher]

Λοιπόν τον βρήκα τον εκτυπωτή και τον έκανα εγκατάσταση .Τώρα άνοιξα τον firefox και με safe mode και χωρίς αλλά και πάλι δε βρίσκει κάποιον εκτυπωτή.Μπήκα και στον άλλο user που φτιάξαμε πρίν αλλά και εκεί δε τον βρίσκει.

[elefher]

Λοιπόν παιδιά επειδή συνεχίζω και κάνω μ******* μόνος μου τώρα έχω και άλλο πρόβλημα.Πήγα στο localhost και κατέβασα το cups1.4 και το έκανα εγκατάσταση με αποτέλεσμα να μου βγάλει τον εκτυπωτή.Τώρα όταν πάω να τον εγκαταστήσω με τοhplip μου τον βρίσκει αλλά δε βρίσκει τα cups πάω και το βρίσκω εγώ χειροκήνητα αλλά όταν πατάω add print μου λέει να κάνω restart cups έτσι έδωσα

Κώδικας: Επιλογή όλων

sudo /etc/init.d/cups restart

αλλά και πάλι δεν έγινε τίποτα.
Εάν θέλετε για να μην σας πεδεύω άλλο θα βάλω το ubuntu 10.10 εκτός και εάν θέλετε να το λύσεται.
Πάντος σας ευχαριστώ πολύ.
Είμαι σε αναμονή..

[medigeek]

Για να μην κάνεις άδικα αναβάθμιση, δοκίμασε με live cd 10.10

[elefher]

Λοιπόν παιδιά έβαλα το usb-live του 10.10 και χωρίς να τον έχω κάνει εγκατάσταση τον εκτυπωτή ο firefox μου τον έβρησκε κανονικά.Οπότε μάλον προχωράω στην εγκατάσταση εσείς τι λέτε???Στα 10.10 να τον κάνω εγκατάσταη απο το synaptic?Κάτι ακόμα το θέμα λέω να μην το δηλωσω ως λυμένο μίας και πιστεύω ότι το "ας το πούμε format" στο linux είναι μία κίνηση απελπησίας άλωστε δεν έχουμε και παράθυρα.