αποτέλεσμα της εντολής lsusb
- Κώδικας: Επιλογή όλων
Bus 002 Device 004: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
Bus 002 Device 003: ID 055f:021e Mustek Systems, Inc. BearPaw 1200 TA/CS
Bus 002 Device 002: ID 1130:1620 Tenx Technology, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T USB2.0 stick
Bus 001 Device 002: ID 0d49:7410 Maxtor Mobile Hard Disk Drive (1TB)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
της lsmod
- Κώδικας: Επιλογή όλων
Module Size Used by
binfmt_misc 6587 1
snd_hda_codec_realtek 203375 1
dvb_usb_af9015 23159 0
dvb_usb 14457 1 dvb_usb_af9015
dvb_core 86206 1 dvb_usb
snd_hda_intel 22037 2
snd_hda_codec 74201 2 snd_hda_codec_realtek,snd_hda_intel
snd_usb_audio 75765 1
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70694 4 snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_pcm_oss
snd_usb_lib 15801 1 snd_usb_audio
snd_hwdep 5412 2 snd_hda_codec,snd_usb_audio
snd_seq_dummy 1338 0
ppdev 5259 0
snd_seq_oss 26722 0
snd_seq_midi 4557 0
snd_rawmidi 19056 2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 54180 19 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
parport_pc 25962 1
asus_atk0110 9017 0
nvidia 9961216 38
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
usbhid 36110 0
soundcore 6620 1 snd
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
agpgart 31724 1 nvidia
vga16fb 11385 1
vgastate 8961 1 vga16fb
i2c_nforce2 5199 0
lp 7060 0
parport 32635 3 ppdev,parport_pc,lp
hid 67032 1 usbhid
usb_storage 39553 1
pata_amd 8766 0
forcedeth 49556 0
sata_nv 19376 2
της dmesg
- Κώδικας: Επιλογή όλων
[ 0.188413] pci 0000:00:01.1: reg 10 io port: [0xe00-0xe3f]
[ 0.188423] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
[ 0.188426] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
[ 0.188444] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.188448] pci 0000:00:01.1: PME# disabled
[ 0.188491] pci 0000:00:02.0: reg 10 32bit mmio: [0xdbffb000-0xdbffbfff]
[ 0.188512] pci 0000:00:02.0: supports D1 D2
[ 0.188513] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188516] pci 0000:00:02.0: PME# disabled
[ 0.188535] pci 0000:00:02.1: reg 10 32bit mmio: [0xdbffac00-0xdbffacff]
[ 0.188560] pci 0000:00:02.1: supports D1 D2
[ 0.188561] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188564] pci 0000:00:02.1: PME# disabled
[ 0.188621] pci 0000:00:05.0: reg 10 32bit mmio: [0xdbff4000-0xdbff7fff]
[ 0.188645] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.188647] pci 0000:00:05.0: PME# disabled
[ 0.188677] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.188709] pci 0000:00:07.0: reg 10 32bit mmio: [0xdbff9000-0xdbff9fff]
[ 0.188712] pci 0000:00:07.0: reg 14 io port: [0xd480-0xd487]
[ 0.188732] pci 0000:00:07.0: supports D1 D2
[ 0.188734] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188737] pci 0000:00:07.0: PME# disabled
[ 0.188755] pci 0000:00:08.0: reg 10 io port: [0xd400-0xd407]
[ 0.188758] pci 0000:00:08.0: reg 14 io port: [0xd080-0xd083]
[ 0.188761] pci 0000:00:08.0: reg 18 io port: [0xd000-0xd007]
[ 0.188764] pci 0000:00:08.0: reg 1c io port: [0xcc00-0xcc03]
[ 0.188767] pci 0000:00:08.0: reg 20 io port: [0xc880-0xc88f]
[ 0.188770] pci 0000:00:08.0: reg 24 32bit mmio: [0xdbff8000-0xdbff8fff]
[ 0.188797] pci 0000:00:08.1: reg 10 io port: [0xc800-0xc807]
[ 0.188800] pci 0000:00:08.1: reg 14 io port: [0xc480-0xc483]
[ 0.188803] pci 0000:00:08.1: reg 18 io port: [0xc400-0xc407]
[ 0.188806] pci 0000:00:08.1: reg 1c io port: [0xc080-0xc083]
[ 0.188809] pci 0000:00:08.1: reg 20 io port: [0xc000-0xc00f]
[ 0.188812] pci 0000:00:08.1: reg 24 32bit mmio: [0xdbfef000-0xdbfeffff]
[ 0.188858] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188860] pci 0000:00:09.0: PME# disabled
[ 0.188893] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188895] pci 0000:00:0b.0: PME# disabled
[ 0.188925] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188928] pci 0000:00:0c.0: PME# disabled
[ 0.189033] pci 0000:00:04.0: transparent bridge
[ 0.189057] pci 0000:02:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
[ 0.189063] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.189070] pci 0000:02:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff]
[ 0.189074] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f]
[ 0.189078] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xdefe0000-0xdeffffff]
[ 0.189128] pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
[ 0.189131] pci 0000:00:09.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
[ 0.189134] pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.189205] pci_bus 0000:00: on NUMA node 0
[ 0.189208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.189325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.189412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.189454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.189496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.195238] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.195401] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.195561] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.195722] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.195885] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.196048] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.196209] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.196374] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
[ 0.196539] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 0.196704] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.196868] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[ 0.197033] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.197195] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.197359] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.197519] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.197682] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
[ 0.197846] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[ 0.198034] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.198108] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.198110] vgaarb: loaded
[ 0.198184] SCSI subsystem initialized
[ 0.198223] libata version 3.00 loaded.
[ 0.198266] usbcore: registered new interface driver usbfs
[ 0.198274] usbcore: registered new interface driver hub
[ 0.198290] usbcore: registered new device driver usb
[ 0.198366] ACPI: WMI: Mapper loaded
[ 0.198368] PCI: Using ACPI for IRQ routing
[ 0.198459] NetLabel: Initializing
[ 0.198460] NetLabel: domain hash size = 128
[ 0.198461] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.198470] NetLabel: unlabeled traffic allowed by default
[ 0.198492] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.198495] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.204036] Switching to clocksource tsc
[ 0.205073] AppArmor: AppArmor Filesystem Enabled
[ 0.205085] pnp: PnP ACPI init
[ 0.205098] ACPI: bus type pnp registered
[ 0.207465] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
[ 0.207468] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
[ 0.209808] pnp: PnP ACPI: found 14 devices
[ 0.209809] ACPI: ACPI bus type pnp unregistered
[ 0.209812] PnPBIOS: Disabled by ACPI PNP
[ 0.209824] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.209826] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.209828] system 00:06: ioport range 0x500-0x57f has been reserved
[ 0.209831] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 0.209833] system 00:06: ioport range 0x800-0x87f could not be reserved
[ 0.209835] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.209837] system 00:06: ioport range 0xd00-0xd7f has been reserved
[ 0.209839] system 00:06: ioport range 0xd80-0xdff has been reserved
[ 0.209841] system 00:06: ioport range 0x1100-0x117f has been reserved
[ 0.209843] system 00:06: ioport range 0x1180-0x11ff has been reserved
[ 0.209846] system 00:06: iomem range 0xfec80000-0xfd93ffff could not be reserved
[ 0.209849] system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.209851] system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 0.209853] system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.209857] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.209860] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.209864] system 00:0a: ioport range 0x230-0x23f has been reserved
[ 0.209866] system 00:0a: ioport range 0x290-0x29f has been reserved
[ 0.209868] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[ 0.209869] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[ 0.209873] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.209877] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.209879] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.209881] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.209883] system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.209885] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.244525] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.244527] pci 0000:00:04.0: IO window: disabled
[ 0.244529] pci 0000:00:04.0: MEM window: disabled
[ 0.244532] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.244535] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.244537] pci 0000:00:09.0: IO window: 0xe000-0xefff
[ 0.244540] pci 0000:00:09.0: MEM window: 0xdc000000-0xdfffffff
[ 0.244542] pci 0000:00:09.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.244545] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[ 0.244547] pci 0000:00:0b.0: IO window: disabled
[ 0.244549] pci 0000:00:0b.0: MEM window: disabled
[ 0.244551] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.244553] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[ 0.244555] pci 0000:00:0c.0: IO window: disabled
[ 0.244557] pci 0000:00:0c.0: MEM window: disabled
[ 0.244558] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.244565] pci 0000:00:04.0: setting latency timer to 64
[ 0.244569] pci 0000:00:09.0: setting latency timer to 64
[ 0.244573] pci 0000:00:0b.0: setting latency timer to 64
[ 0.244577] pci 0000:00:0c.0: setting latency timer to 64
[ 0.244580] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.244582] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.244584] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.244586] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.244588] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.244589] pci_bus 0000:02: resource 1 mem: [0xdc000000-0xdfffffff]
[ 0.244591] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.244619] NET: Registered protocol family 2
[ 0.244690] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.244930] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.245402] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.245658] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.245660] TCP reno registered
[ 0.245738] NET: Registered protocol family 1
[ 0.779790] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.779838] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.779893] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.779947] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.780001] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.780059] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.780121] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.780187] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.780199] pci 0000:02:00.0: Boot video device
[ 0.780346] cpufreq-nforce2: No nForce2 chipset.
[ 0.780362] Scanning for low memory corruption every 60 seconds
[ 0.780433] audit: initializing netlink socket (disabled)
[ 0.780442] type=2000 audit(1288114000.779:1): initialized
[ 0.786710] highmem bounce pool size: 64 pages
[ 0.786713] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.787652] VFS: Disk quotas dquot_6.5.2
[ 0.787692] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.788067] fuse init (API version 7.13)
[ 0.788121] msgmni has been set to 1716
[ 0.788256] alg: No test for stdrng (krng)
[ 0.788292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.788294] io scheduler noop registered
[ 0.788295] io scheduler anticipatory registered
[ 0.788297] io scheduler deadline registered
[ 0.788324] io scheduler cfq registered (default)
[ 0.788413] alloc irq_desc for 24 on node -1
[ 0.788415] alloc kstat_irqs on node -1
[ 0.788421] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
[ 0.788425] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.788481] alloc irq_desc for 25 on node -1
[ 0.788482] alloc kstat_irqs on node -1
[ 0.788485] pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
[ 0.788489] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.788539] alloc irq_desc for 26 on node -1
[ 0.788540] alloc kstat_irqs on node -1
[ 0.788544] pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
[ 0.788547] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.788584] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.788601] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.788667] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.788670] ACPI: Power Button [PWRB]
[ 0.788703] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.788705] ACPI: Power Button [PWRF]
[ 0.789113] processor LNXCPU:00: registered as cooling_device0
[ 0.789359] processor LNXCPU:01: registered as cooling_device1
[ 0.792945] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.793028] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.793265] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.793890] brd: module loaded
[ 0.794171] loop: module loaded
[ 0.794220] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.794325] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.794584] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 0.794588] alloc irq_desc for 23 on node -1
[ 0.794589] alloc kstat_irqs on node -1
[ 0.794597] pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 0.794608] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 0.794612] pata_acpi 0000:00:08.0: PCI INT A disabled
[ 0.794849] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 0.794851] alloc irq_desc for 22 on node -1
[ 0.794852] alloc kstat_irqs on node -1
[ 0.794858] pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 0.794867] pata_acpi 0000:00:08.1: setting latency timer to 64
[ 0.794872] pata_acpi 0000:00:08.1: PCI INT B disabled
[ 0.795065] Fixed MDIO Bus: probed
[ 0.795086] PPP generic driver version 2.4.2
[ 0.795110] tun: Universal TUN/TAP device driver, 1.6
[ 0.795111] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.795160] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.795405] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
[ 0.795407] alloc irq_desc for 21 on node -1
[ 0.795409] alloc kstat_irqs on node -1
[ 0.795414] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
[ 0.795422] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.795424] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.795445] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.795459] ehci_hcd 0000:00:02.1: debug port 1
[ 0.795465] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.795482] ehci_hcd 0000:00:02.1: irq 21, io mem 0xdbffac00
[ 0.795518] isapnp: Scanning for PnP cards...
[ 0.837411] Freeing initrd memory: 7785k freed
[ 0.844485] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.844547] usb usb1: configuration #1 chosen from 1 choice
[ 0.844566] hub 1-0:1.0: USB hub found
[ 0.844571] hub 1-0:1.0: 10 ports detected
[ 0.844613] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.844855] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 0.844857] alloc irq_desc for 20 on node -1
[ 0.844859] alloc kstat_irqs on node -1
[ 0.844865] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 0.844871] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.844873] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.844891] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.844910] ohci_hcd 0000:00:02.0: irq 20, io mem 0xdbffb000
[ 0.901960] usb usb2: configuration #1 chosen from 1 choice
[ 0.901984] hub 2-0:1.0: USB hub found
[ 0.901993] hub 2-0:1.0: 10 ports detected
[ 0.902040] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.902096] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.902097] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.902235] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.902287] mice: PS/2 mouse device common for all mice
[ 0.902354] rtc_cmos 00:02: RTC can wake from S4
[ 0.902379] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.902414] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.902481] device-mapper: uevent: version 1.0.3
[ 0.902553] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.902594] device-mapper: multipath: version 1.1.0 loaded
[ 0.902596] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.902665] EISA: Probing bus 0 at eisa.0
[ 0.902687] EISA: Detected 0 cards.
[ 0.902729] cpuidle: using governor ladder
[ 0.902730] cpuidle: using governor menu
[ 0.903026] TCP cubic registered
[ 0.903122] NET: Registered protocol family 10
[ 0.903430] lo: Disabled Privacy Extensions
[ 0.903647] NET: Registered protocol family 17
[ 0.903665] powernow-k8: Found 1 AMD Athlon(tm) II X2 240 Processor processors (2 cpu cores) (version 2.20.00)
[ 0.903672] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 0.903673] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 0.903686] Using IPI No-Shortcut mode
[ 0.903727] PM: Resume from disk failed.
[ 0.903735] registered taskstats version 1
[ 0.903951] Magic number: 14:157:442
[ 0.904023] rtc_cmos 00:02: setting system clock to 2010-10-26 17:26:41 UTC (1288114001)
[ 0.904025] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.904027] EDD information not available.
[ 0.921778] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.149489] isapnp: No Plug & Play device found
[ 1.149507] Freeing unused kernel memory: 656k freed
[ 1.149727] Write protecting the kernel text: 4684k
[ 1.149751] Write protecting the kernel read-only data: 1840k
[ 1.160594] udev: starting version 151
[ 1.171794] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.207734] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.208112] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 1.208117] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[ 1.208121] forcedeth 0000:00:07.0: setting latency timer to 64
[ 1.272987] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:26:18:e9:07:0d
[ 1.272991] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.273113] pata_amd 0000:00:06.0: version 0.4.1
[ 1.273146] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.273217] scsi0 : pata_amd
[ 1.273291] scsi1 : pata_amd
[ 1.273906] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.273908] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.273943] sata_nv 0000:00:08.0: version 3.5
[ 1.273950] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.273978] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.274010] scsi2 : sata_nv
[ 1.274046] scsi3 : sata_nv
[ 1.274142] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 23
[ 1.274144] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 23
[ 1.274157] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 1.274175] sata_nv 0000:00:08.1: setting latency timer to 64
[ 1.274211] scsi4 : sata_nv
[ 1.274270] scsi5 : sata_nv
[ 1.274365] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 22
[ 1.274367] ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 22
[ 1.304913] usb 1-1: configuration #1 chosen from 1 choice
[ 1.310231] Initializing USB Mass Storage driver...
[ 1.310313] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.310376] usbcore: registered new interface driver usb-storage
[ 1.310378] USB Mass Storage support registered.
[ 1.310382] usb-storage: device found at 2
[ 1.310384] usb-storage: waiting for device to settle before scanning
[ 1.444150] ata1.00: ATAPI: PIONEER DVD-RW DVR-109, 1.40, max UDMA/66
[ 1.444172] ata1.01: ATAPI: DVD-ROM DDU1621, VER S1.6, max UDMA/33
[ 1.444188] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x15)
[ 1.444192] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x15)
[ 1.460120] ata1.00: configured for UDMA/66
[ 1.476061] ata1.01: configured for UDMA/33
[ 1.483335] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-109 1.40 PQ: 0 ANSI: 5
[ 1.506504] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.506508] Uniform CD-ROM driver Revision: 3.20
[ 1.506611] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.506658] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.507011] scsi 0:0:1:0: CD-ROM SONY DVD-ROM DDU1621 S1.6 PQ: 0 ANSI: 5
[ 1.508498] sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[ 1.508547] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 1.508607] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.508660] ata2: port disabled. ignoring.
[ 1.538289] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.640057] usb 1-10: new high speed USB device using ehci_hcd and address 6
[ 1.684061] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.692354] ata3.00: ATA-8: ST3250318AS, CC38, max UDMA/133
[ 1.692357] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.708352] ata3.00: configured for UDMA/133
[ 1.708429] scsi 2:0:0:0: Direct-Access ATA ST3250318AS CC38 PQ: 0 ANSI: 5
[ 1.708561] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.708630] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.708657] sd 2:0:0:0: [sda] Write Protect is off
[ 1.708659] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.708672] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.708869] sda: sda1 sda2 < sda5 >
[ 1.751381] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.777014] usb 1-10: configuration #1 chosen from 1 choice
[ 1.968154] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 2.030310] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.084040] usb 2-3: new full speed USB device using ohci_hcd and address 2
[ 2.293219] usb 2-3: configuration #1 chosen from 1 choice
[ 2.350307] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.600040] usb 2-4: new full speed USB device using ohci_hcd and address 3
[ 2.809302] usb 2-4: configuration #1 chosen from 1 choice
[ 3.120042] usb 2-9: new low speed USB device using ohci_hcd and address 4
[ 3.332395] usb 2-9: configuration #1 chosen from 1 choice
[ 5.788134] usb-storage: device scan complete
[ 5.788596] scsi 6:0:0:0: Direct-Access Maxtor Basics Desktop 0122 PQ: 0 ANSI: 4
[ 5.788937] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 5.789453] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.789950] sd 6:0:0:0: [sdb] Write Protect is off
[ 5.789952] sd 6:0:0:0: [sdb] Mode Sense: 2d 08 00 00
[ 5.789954] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5.791074] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5.791076] sdb: sdb1
[ 5.792953] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5.792956] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 12.545464] udev: starting version 151
[ 12.584304] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 12.584333] i2c i2c-1: nForce2 SMBus adapter at 0x700
[ 12.624646] vga16fb: initializing
[ 12.624652] vga16fb: mapped to 0xc00a0000
[ 12.624703] fb0: VGA16 VGA frame buffer device
[ 12.634737] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
[ 12.646641] lp: driver loaded but no devices found
[ 12.668365] Linux agpgart interface v0.103
[ 12.726242] nvidia: module license 'NVIDIA' taints kernel.
[ 12.726245] Disabling lock debugging due to kernel taint
[ 12.804227] usbcore: registered new interface driver hiddev
[ 12.806944] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[ 12.807234] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.1/input/input4
[ 12.807393] generic-usb 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-10/input1
[ 12.864579] input: USB AUDIO as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/input/input5
[ 12.864625] generic-usb 0003:1130:1620.0002: input,hidraw1: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:02.0-3/input2
[ 12.865011] Console: switching to colour frame buffer device 80x30
[ 12.871959] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input6
[ 12.872020] generic-usb 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-9/input0
[ 12.872034] usbcore: registered new interface driver usbhid
[ 12.872036] usbhid: v2.6:USB HID core driver
[ 13.481015] parport_pc 00:05: reported by Plug and Play ACPI
[ 13.481060] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 13.497515] parport0: Printer, HEWLETT-PACKARD DESKJET 880C
[ 13.504348] lp0: using parport0 (interrupt-driven).
[ 13.537420] ppdev: user-space parallel port driver
[ 13.602801] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 13.602807] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 13.602810] hda_intel: Disable MSI for Nvidia chipset
[ 13.602829] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 13.624253] usbcore: registered new interface driver snd-usb-audio
[ 13.730097] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[ 13.730103] alloc irq_desc for 19 on node -1
[ 13.730105] alloc kstat_irqs on node -1
[ 13.730114] nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
[ 13.730120] nvidia 0000:02:00.0: setting latency timer to 64
[ 13.730124] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 13.730324] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
[ 13.809044] af9015: tuner id:179 not supported, please report!
[ 13.809090] usbcore: registered new interface driver dvb_usb_af9015
[ 13.823074] type=1505 audit(1288114014.415:2): operation="profile_load" pid=706 name="/sbin/dhclient3"
[ 13.823272] type=1505 audit(1288114014.415:3): operation="profile_load" pid=706 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 13.823383] type=1505 audit(1288114014.415:4): operation="profile_load" pid=706 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.136099] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input7
[ 14.351826] type=1505 audit(1288114014.943:5): operation="profile_load" pid=887 name="/usr/share/gdm/guest-session/Xsession"
[ 14.353309] type=1505 audit(1288114014.947:6): operation="profile_replace" pid=893 name="/sbin/dhclient3"
[ 14.353517] type=1505 audit(1288114014.947:7): operation="profile_replace" pid=893 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.353633] type=1505 audit(1288114014.947:8): operation="profile_replace" pid=893 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.355780] type=1505 audit(1288114014.947:9): operation="profile_load" pid=896 name="/usr/bin/evince"
[ 14.358504] type=1505 audit(1288114014.951:10): operation="profile_load" pid=896 name="/usr/bin/evince-previewer"
[ 14.360112] type=1505 audit(1288114014.955:11): operation="profile_load" pid=896 name="/usr/bin/evince-thumbnailer"
[ 14.499151] alloc irq_desc for 27 on node -1
[ 14.499154] alloc kstat_irqs on node -1
[ 14.499161] forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X
[ 14.842485] CPU0 attaching NULL sched-domain.
[ 14.842490] CPU1 attaching NULL sched-domain.
[ 14.868578] CPU0 attaching sched-domain:
[ 14.868582] domain 0: span 0-1 level MC
[ 14.868584] groups: 0 1
[ 14.868589] CPU1 attaching sched-domain:
[ 14.868590] domain 0: span 0-1 level MC
[ 14.868592] groups: 1 0
[ 18.338289] CPU0 attaching NULL sched-domain.
[ 18.338294] CPU1 attaching NULL sched-domain.
[ 18.360065] CPU0 attaching sched-domain:
[ 18.360068] domain 0: span 0-1 level MC
[ 18.360071] groups: 0 1
[ 18.360076] CPU1 attaching sched-domain:
[ 18.360077] domain 0: span 0-1 level MC
[ 18.360079] groups: 1 0
[ 24.832022] eth0: no IPv6 routers present
[ 495.617596] __ratelimit: 12 callbacks suppressed
[ 495.617601] tvtime[1535]: segfault at 6b0 ip 0804d824 sp bf9a270c error 4 in tvtime[8048000+76000]
της gedit /var/log/dmesg
- Κώδικας: Επιλογή όλων
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-25-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #45-Ubuntu SMP Sat Oct 16 19:48:22 UTC 2010 (Ubuntu 2.6.32-25.45-generic 2.6.32.21+drm33.7)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ffe0000 - 000000003ffee000 (reserved)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009b400 (usable)
[ 0.000000] modified: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] modified: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
[ 0.000000] modified: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS)
[ 0.000000] modified: 000000003ffe0000 - 000000003ffee000 (reserved)
[ 0.000000] modified: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 2f869000 - 30003691
[ 0.000000] ACPI: RSDP 000fb730 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 3ffb0100 0004C (v01 082509 XSDT1328 20090825 MSFT 00000097)
[ 0.000000] ACPI: FACP 3ffb0290 000F4 (v03 082509 FACP1328 20090825 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3ffb0450 06B6A (v01 A1298 A1298000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 3ffbe000 00040
[ 0.000000] ACPI: APIC 3ffb0390 00080 (v01 082509 APIC1328 20090825 MSFT 00000097)
[ 0.000000] ACPI: MCFG 3ffb0410 0003C (v01 082509 OEMMCFG 20090825 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3ffbe040 00071 (v01 082509 OEMB1328 20090825 MSFT 00000097)
[ 0.000000] ACPI: HPET 3ffb6fc0 00038 (v01 082509 OEMHPET0 20090825 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8]
[ 0.000000] #4 [002f869000 - 0030003691] RAMDISK ==> [002f869000 - 0030003691]
[ 0.000000] #5 [000009b400 - 0000100000] BIOS reserved ==> [000009b400 - 0000100000]
[ 0.000000] #6 [00008dd000 - 00008e022c] BRK ==> [00008dd000 - 00008e022c]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003ffb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x0003ffb0
[ 0.000000] On node 0 totalpages: 261947
[ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3947 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34466 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u1048576
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259899
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=24b3f2a0-6152-455b-9c3c-01e64ae260e2 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5240960 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0)
[ 0.000000] Memory: 1016768k/1048256k available (4680k kernel code, 30232k reserved, 2122k data, 656k init, 138952k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB)
[ 0.000000] .data : 0xc0592317 - 0xc07a4e68 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0592317 (4680 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2812.330 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5624.66 BogoMIPS (lpj=11249320)
[ 0.004017] Security Framework initialized
[ 0.004031] AppArmor: AppArmor initialized
[ 0.004037] Mount-cache hash table entries: 512
[ 0.004124] Initializing cgroup subsys ns
[ 0.004127] Initializing cgroup subsys cpuacct
[ 0.004130] Initializing cgroup subsys memory
[ 0.004134] Initializing cgroup subsys devices
[ 0.004136] Initializing cgroup subsys freezer
[ 0.004138] Initializing cgroup subsys net_cls
[ 0.004150] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004152] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004154] CPU: Physical Processor ID: 0
[ 0.004155] CPU: Processor Core ID: 0
[ 0.004158] mce: CPU supports 6 MCE banks
[ 0.004166] using C1E aware idle routine
[ 0.004170] Performance Events: AMD PMU driver.
[ 0.004175] ... version: 0
[ 0.004176] ... bit width: 48
[ 0.004177] ... generic registers: 4
[ 0.004179] ... value mask: 0000ffffffffffff
[ 0.004180] ... max period: 00007fffffffffff
[ 0.004181] ... fixed-purpose events: 0
[ 0.004183] ... event mask: 000000000000000f
[ 0.004186] Checking 'hlt' instruction... OK.
[ 0.021625] ACPI: Core revision 20090903
[ 0.030361] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.030365] ftrace: allocating 21789 entries in 43 pages
[ 0.032070] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032525] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.075518] CPU0: AMD Athlon(tm) II X2 240 Processor stepping 02
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.160107] CPU1: AMD Athlon(tm) II X2 240 Processor stepping 02
[ 0.160116] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164011] Brought up 2 CPUs
[ 0.164013] Total of 2 processors activated (11250.21 BogoMIPS).
[ 0.164223] CPU0 attaching sched-domain:
[ 0.164225] domain 0: span 0-1 level MC
[ 0.164227] groups: 0 1
[ 0.164231] CPU1 attaching sched-domain:
[ 0.164232] domain 0: span 0-1 level MC
[ 0.164234] groups: 1 0
[ 0.164293] devtmpfs: initialized
[ 0.164293] regulator: core version 0.5
[ 0.164293] Time: 17:26:41 Date: 10/26/10
[ 0.164293] NET: Registered protocol family 16
[ 0.164293] EISA bus registered
[ 0.164293] Trying to unpack rootfs image as initramfs...
[ 0.164293] ACPI: bus type pci registered
[ 0.164293] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.164293] PCI: Not using MMCONFIG.
[ 0.164961] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.164962] PCI: Using configuration type 1 for base access
[ 0.164964] PCI: Using configuration type 1 for extended access
[ 0.168131] bio: create slab <bio-0> at 0
[ 0.168791] ACPI: EC: Look up EC in DSDT
[ 0.171968] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.176991] ACPI: Interpreter enabled
[ 0.176994] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.177011] ACPI: Using IOAPIC for interrupt routing
[ 0.177050] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.181599] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.181601] PCI: Using MMCONFIG for extended config space
[ 0.187856] ACPI Warning: Incorrect checksum in table [OEMB] - FB, should be F6 (20090903/tbutils-314)
[ 0.187938] ACPI: No dock devices found.
[ 0.188217] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.188379] pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
[ 0.188413] pci 0000:00:01.1: reg 10 io port: [0xe00-0xe3f]
[ 0.188423] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
[ 0.188426] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
[ 0.188444] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.188448] pci 0000:00:01.1: PME# disabled
[ 0.188491] pci 0000:00:02.0: reg 10 32bit mmio: [0xdbffb000-0xdbffbfff]
[ 0.188512] pci 0000:00:02.0: supports D1 D2
[ 0.188513] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188516] pci 0000:00:02.0: PME# disabled
[ 0.188535] pci 0000:00:02.1: reg 10 32bit mmio: [0xdbffac00-0xdbffacff]
[ 0.188560] pci 0000:00:02.1: supports D1 D2
[ 0.188561] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188564] pci 0000:00:02.1: PME# disabled
[ 0.188621] pci 0000:00:05.0: reg 10 32bit mmio: [0xdbff4000-0xdbff7fff]
[ 0.188645] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.188647] pci 0000:00:05.0: PME# disabled
[ 0.188677] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.188709] pci 0000:00:07.0: reg 10 32bit mmio: [0xdbff9000-0xdbff9fff]
[ 0.188712] pci 0000:00:07.0: reg 14 io port: [0xd480-0xd487]
[ 0.188732] pci 0000:00:07.0: supports D1 D2
[ 0.188734] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188737] pci 0000:00:07.0: PME# disabled
[ 0.188755] pci 0000:00:08.0: reg 10 io port: [0xd400-0xd407]
[ 0.188758] pci 0000:00:08.0: reg 14 io port: [0xd080-0xd083]
[ 0.188761] pci 0000:00:08.0: reg 18 io port: [0xd000-0xd007]
[ 0.188764] pci 0000:00:08.0: reg 1c io port: [0xcc00-0xcc03]
[ 0.188767] pci 0000:00:08.0: reg 20 io port: [0xc880-0xc88f]
[ 0.188770] pci 0000:00:08.0: reg 24 32bit mmio: [0xdbff8000-0xdbff8fff]
[ 0.188797] pci 0000:00:08.1: reg 10 io port: [0xc800-0xc807]
[ 0.188800] pci 0000:00:08.1: reg 14 io port: [0xc480-0xc483]
[ 0.188803] pci 0000:00:08.1: reg 18 io port: [0xc400-0xc407]
[ 0.188806] pci 0000:00:08.1: reg 1c io port: [0xc080-0xc083]
[ 0.188809] pci 0000:00:08.1: reg 20 io port: [0xc000-0xc00f]
[ 0.188812] pci 0000:00:08.1: reg 24 32bit mmio: [0xdbfef000-0xdbfeffff]
[ 0.188858] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188860] pci 0000:00:09.0: PME# disabled
[ 0.188893] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188895] pci 0000:00:0b.0: PME# disabled
[ 0.188925] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188928] pci 0000:00:0c.0: PME# disabled
[ 0.189033] pci 0000:00:04.0: transparent bridge
[ 0.189057] pci 0000:02:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
[ 0.189063] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.189070] pci 0000:02:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff]
[ 0.189074] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f]
[ 0.189078] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xdefe0000-0xdeffffff]
[ 0.189128] pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
[ 0.189131] pci 0000:00:09.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
[ 0.189134] pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.189205] pci_bus 0000:00: on NUMA node 0
[ 0.189208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.189325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.189412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.189454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.189496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.195238] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.195401] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.195561] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.195722] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.195885] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.196048] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.196209] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.196374] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
[ 0.196539] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 0.196704] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.196868] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[ 0.197033] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.197195] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.197359] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.197519] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.197682] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
[ 0.197846] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[ 0.198034] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.198108] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.198110] vgaarb: loaded
[ 0.198184] SCSI subsystem initialized
[ 0.198223] libata version 3.00 loaded.
[ 0.198266] usbcore: registered new interface driver usbfs
[ 0.198274] usbcore: registered new interface driver hub
[ 0.198290] usbcore: registered new device driver usb
[ 0.198366] ACPI: WMI: Mapper loaded
[ 0.198368] PCI: Using ACPI for IRQ routing
[ 0.198459] NetLabel: Initializing
[ 0.198460] NetLabel: domain hash size = 128
[ 0.198461] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.198470] NetLabel: unlabeled traffic allowed by default
[ 0.198492] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.198495] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.204036] Switching to clocksource tsc
[ 0.205073] AppArmor: AppArmor Filesystem Enabled
[ 0.205085] pnp: PnP ACPI init
[ 0.205098] ACPI: bus type pnp registered
[ 0.207465] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
[ 0.207468] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
[ 0.209808] pnp: PnP ACPI: found 14 devices
[ 0.209809] ACPI: ACPI bus type pnp unregistered
[ 0.209812] PnPBIOS: Disabled by ACPI PNP
[ 0.209824] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.209826] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.209828] system 00:06: ioport range 0x500-0x57f has been reserved
[ 0.209831] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 0.209833] system 00:06: ioport range 0x800-0x87f could not be reserved
[ 0.209835] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.209837] system 00:06: ioport range 0xd00-0xd7f has been reserved
[ 0.209839] system 00:06: ioport range 0xd80-0xdff has been reserved
[ 0.209841] system 00:06: ioport range 0x1100-0x117f has been reserved
[ 0.209843] system 00:06: ioport range 0x1180-0x11ff has been reserved
[ 0.209846] system 00:06: iomem range 0xfec80000-0xfd93ffff could not be reserved
[ 0.209849] system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.209851] system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 0.209853] system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.209857] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.209860] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.209864] system 00:0a: ioport range 0x230-0x23f has been reserved
[ 0.209866] system 00:0a: ioport range 0x290-0x29f has been reserved
[ 0.209868] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[ 0.209869] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[ 0.209873] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.209877] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.209879] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.209881] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.209883] system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.209885] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.244525] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.244527] pci 0000:00:04.0: IO window: disabled
[ 0.244529] pci 0000:00:04.0: MEM window: disabled
[ 0.244532] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.244535] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.244537] pci 0000:00:09.0: IO window: 0xe000-0xefff
[ 0.244540] pci 0000:00:09.0: MEM window: 0xdc000000-0xdfffffff
[ 0.244542] pci 0000:00:09.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.244545] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[ 0.244547] pci 0000:00:0b.0: IO window: disabled
[ 0.244549] pci 0000:00:0b.0: MEM window: disabled
[ 0.244551] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.244553] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[ 0.244555] pci 0000:00:0c.0: IO window: disabled
[ 0.244557] pci 0000:00:0c.0: MEM window: disabled
[ 0.244558] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.244565] pci 0000:00:04.0: setting latency timer to 64
[ 0.244569] pci 0000:00:09.0: setting latency timer to 64
[ 0.244573] pci 0000:00:0b.0: setting latency timer to 64
[ 0.244577] pci 0000:00:0c.0: setting latency timer to 64
[ 0.244580] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.244582] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.244584] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.244586] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.244588] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.244589] pci_bus 0000:02: resource 1 mem: [0xdc000000-0xdfffffff]
[ 0.244591] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.244619] NET: Registered protocol family 2
[ 0.244690] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.244930] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.245402] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.245658] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.245660] TCP reno registered
[ 0.245738] NET: Registered protocol family 1
[ 0.779790] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.779838] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.779893] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.779947] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.780001] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.780059] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.780121] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.780187] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.780199] pci 0000:02:00.0: Boot video device
[ 0.780346] cpufreq-nforce2: No nForce2 chipset.
[ 0.780362] Scanning for low memory corruption every 60 seconds
[ 0.780433] audit: initializing netlink socket (disabled)
[ 0.780442] type=2000 audit(1288114000.779:1): initialized
[ 0.786710] highmem bounce pool size: 64 pages
[ 0.786713] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.787652] VFS: Disk quotas dquot_6.5.2
[ 0.787692] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.788067] fuse init (API version 7.13)
[ 0.788121] msgmni has been set to 1716
[ 0.788256] alg: No test for stdrng (krng)
[ 0.788292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.788294] io scheduler noop registered
[ 0.788295] io scheduler anticipatory registered
[ 0.788297] io scheduler deadline registered
[ 0.788324] io scheduler cfq registered (default)
[ 0.788413] alloc irq_desc for 24 on node -1
[ 0.788415] alloc kstat_irqs on node -1
[ 0.788421] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
[ 0.788425] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.788481] alloc irq_desc for 25 on node -1
[ 0.788482] alloc kstat_irqs on node -1
[ 0.788485] pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
[ 0.788489] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.788539] alloc irq_desc for 26 on node -1
[ 0.788540] alloc kstat_irqs on node -1
[ 0.788544] pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
[ 0.788547] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.788584] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.788601] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.788667] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.788670] ACPI: Power Button [PWRB]
[ 0.788703] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.788705] ACPI: Power Button [PWRF]
[ 0.789113] processor LNXCPU:00: registered as cooling_device0
[ 0.789359] processor LNXCPU:01: registered as cooling_device1
[ 0.792945] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.793028] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.793265] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.793890] brd: module loaded
[ 0.794171] loop: module loaded
[ 0.794220] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.794325] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.794584] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 0.794588] alloc irq_desc for 23 on node -1
[ 0.794589] alloc kstat_irqs on node -1
[ 0.794597] pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 0.794608] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 0.794612] pata_acpi 0000:00:08.0: PCI INT A disabled
[ 0.794849] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 0.794851] alloc irq_desc for 22 on node -1
[ 0.794852] alloc kstat_irqs on node -1
[ 0.794858] pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 0.794867] pata_acpi 0000:00:08.1: setting latency timer to 64
[ 0.794872] pata_acpi 0000:00:08.1: PCI INT B disabled
[ 0.795065] Fixed MDIO Bus: probed
[ 0.795086] PPP generic driver version 2.4.2
[ 0.795110] tun: Universal TUN/TAP device driver, 1.6
[ 0.795111] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.795160] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.795405] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
[ 0.795407] alloc irq_desc for 21 on node -1
[ 0.795409] alloc kstat_irqs on node -1
[ 0.795414] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
[ 0.795422] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.795424] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.795445] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.795459] ehci_hcd 0000:00:02.1: debug port 1
[ 0.795465] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.795482] ehci_hcd 0000:00:02.1: irq 21, io mem 0xdbffac00
[ 0.795518] isapnp: Scanning for PnP cards...
[ 0.837411] Freeing initrd memory: 7785k freed
[ 0.844485] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.844547] usb usb1: configuration #1 chosen from 1 choice
[ 0.844566] hub 1-0:1.0: USB hub found
[ 0.844571] hub 1-0:1.0: 10 ports detected
[ 0.844613] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.844855] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 0.844857] alloc irq_desc for 20 on node -1
[ 0.844859] alloc kstat_irqs on node -1
[ 0.844865] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 0.844871] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.844873] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.844891] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.844910] ohci_hcd 0000:00:02.0: irq 20, io mem 0xdbffb000
[ 0.901960] usb usb2: configuration #1 chosen from 1 choice
[ 0.901984] hub 2-0:1.0: USB hub found
[ 0.901993] hub 2-0:1.0: 10 ports detected
[ 0.902040] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.902096] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.902097] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.902235] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.902287] mice: PS/2 mouse device common for all mice
[ 0.902354] rtc_cmos 00:02: RTC can wake from S4
[ 0.902379] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.902414] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.902481] device-mapper: uevent: version 1.0.3
[ 0.902553] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.902594] device-mapper: multipath: version 1.1.0 loaded
[ 0.902596] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.902665] EISA: Probing bus 0 at eisa.0
[ 0.902687] EISA: Detected 0 cards.
[ 0.902729] cpuidle: using governor ladder
[ 0.902730] cpuidle: using governor menu
[ 0.903026] TCP cubic registered
[ 0.903122] NET: Registered protocol family 10
[ 0.903430] lo: Disabled Privacy Extensions
[ 0.903647] NET: Registered protocol family 17
[ 0.903665] powernow-k8: Found 1 AMD Athlon(tm) II X2 240 Processor processors (2 cpu cores) (version 2.20.00)
[ 0.903672] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 0.903673] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 0.903686] Using IPI No-Shortcut mode
[ 0.903727] PM: Resume from disk failed.
[ 0.903735] registered taskstats version 1
[ 0.903951] Magic number: 14:157:442
[ 0.904023] rtc_cmos 00:02: setting system clock to 2010-10-26 17:26:41 UTC (1288114001)
[ 0.904025] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.904027] EDD information not available.
[ 0.921778] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.149489] isapnp: No Plug & Play device found
[ 1.149507] Freeing unused kernel memory: 656k freed
[ 1.149727] Write protecting the kernel text: 4684k
[ 1.149751] Write protecting the kernel read-only data: 1840k
[ 1.160594] udev: starting version 151
[ 1.171794] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.207734] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.208112] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 1.208117] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[ 1.208121] forcedeth 0000:00:07.0: setting latency timer to 64
[ 1.272987] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:26:18:e9:07:0d
[ 1.272991] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.273113] pata_amd 0000:00:06.0: version 0.4.1
[ 1.273146] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.273217] scsi0 : pata_amd
[ 1.273291] scsi1 : pata_amd
[ 1.273906] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.273908] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.273943] sata_nv 0000:00:08.0: version 3.5
[ 1.273950] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.273978] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.274010] scsi2 : sata_nv
[ 1.274046] scsi3 : sata_nv
[ 1.274142] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 23
[ 1.274144] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 23
[ 1.274157] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 1.274175] sata_nv 0000:00:08.1: setting latency timer to 64
[ 1.274211] scsi4 : sata_nv
[ 1.274270] scsi5 : sata_nv
[ 1.274365] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 22
[ 1.274367] ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 22
[ 1.304913] usb 1-1: configuration #1 chosen from 1 choice
[ 1.310231] Initializing USB Mass Storage driver...
[ 1.310313] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.310376] usbcore: registered new interface driver usb-storage
[ 1.310378] USB Mass Storage support registered.
[ 1.310382] usb-storage: device found at 2
[ 1.310384] usb-storage: waiting for device to settle before scanning
[ 1.444150] ata1.00: ATAPI: PIONEER DVD-RW DVR-109, 1.40, max UDMA/66
[ 1.444172] ata1.01: ATAPI: DVD-ROM DDU1621, VER S1.6, max UDMA/33
[ 1.444188] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x15)
[ 1.444192] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x15)
[ 1.460120] ata1.00: configured for UDMA/66
[ 1.476061] ata1.01: configured for UDMA/33
[ 1.483335] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-109 1.40 PQ: 0 ANSI: 5
[ 1.506504] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.506508] Uniform CD-ROM driver Revision: 3.20
[ 1.506611] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.506658] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.507011] scsi 0:0:1:0: CD-ROM SONY DVD-ROM DDU1621 S1.6 PQ: 0 ANSI: 5
[ 1.508498] sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[ 1.508547] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 1.508607] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.508660] ata2: port disabled. ignoring.
[ 1.538289] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.640057] usb 1-10: new high speed USB device using ehci_hcd and address 6
[ 1.684061] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.692354] ata3.00: ATA-8: ST3250318AS, CC38, max UDMA/133
[ 1.692357] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.708352] ata3.00: configured for UDMA/133
[ 1.708429] scsi 2:0:0:0: Direct-Access ATA ST3250318AS CC38 PQ: 0 ANSI: 5
[ 1.708561] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.708630] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.708657] sd 2:0:0:0: [sda] Write Protect is off
[ 1.708659] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.708672] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.708869] sda: sda1 sda2 < sda5 >
[ 1.751381] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.777014] usb 1-10: configuration #1 chosen from 1 choice
[ 1.968154] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 2.030310] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.084040] usb 2-3: new full speed USB device using ohci_hcd and address 2
[ 2.293219] usb 2-3: configuration #1 chosen from 1 choice
[ 2.350307] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.600040] usb 2-4: new full speed USB device using ohci_hcd and address 3
[ 2.809302] usb 2-4: configuration #1 chosen from 1 choice
[ 3.120042] usb 2-9: new low speed USB device using ohci_hcd and address 4
[ 3.332395] usb 2-9: configuration #1 chosen from 1 choice
[ 5.788134] usb-storage: device scan complete
[ 5.788596] scsi 6:0:0:0: Direct-Access Maxtor Basics Desktop 0122 PQ: 0 ANSI: 4
[ 5.788937] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 5.789453] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.789950] sd 6:0:0:0: [sdb] Write Protect is off
[ 5.789952] sd 6:0:0:0: [sdb] Mode Sense: 2d 08 00 00
[ 5.789954] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5.791074] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5.791076] sdb: sdb1
[ 5.792953] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5.792956] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 12.545464] udev: starting version 151
[ 12.584304] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 12.584333] i2c i2c-1: nForce2 SMBus adapter at 0x700
[ 12.624646] vga16fb: initializing
[ 12.624652] vga16fb: mapped to 0xc00a0000
[ 12.624703] fb0: VGA16 VGA frame buffer device
[ 12.634737] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
[ 12.646641] lp: driver loaded but no devices found
[ 12.668365] Linux agpgart interface v0.103
[ 12.726242] nvidia: module license 'NVIDIA' taints kernel.
[ 12.726245] Disabling lock debugging due to kernel taint
[ 12.804227] usbcore: registered new interface driver hiddev
[ 12.806944] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[ 12.807234] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.1/input/input4
[ 12.807393] generic-usb 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-10/input1
[ 12.864579] input: USB AUDIO as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/input/input5
[ 12.864625] generic-usb 0003:1130:1620.0002: input,hidraw1: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:02.0-3/input2
[ 12.865011] Console: switching to colour frame buffer device 80x30
[ 12.871959] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input6
[ 12.872020] generic-usb 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-9/input0
[ 12.872034] usbcore: registered new interface driver usbhid
[ 12.872036] usbhid: v2.6:USB HID core driver
[ 13.481015] parport_pc 00:05: reported by Plug and Play ACPI
[ 13.481060] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 13.497515] parport0: Printer, HEWLETT-PACKARD DESKJET 880C
[ 13.504348] lp0: using parport0 (interrupt-driven).
[ 13.537420] ppdev: user-space parallel port driver
[ 13.602801] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 13.602807] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 13.602810] hda_intel: Disable MSI for Nvidia chipset
[ 13.602829] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 13.624253] usbcore: registered new interface driver snd-usb-audio
[ 13.730097] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[ 13.730103] alloc irq_desc for 19 on node -1
[ 13.730105] alloc kstat_irqs on node -1
[ 13.730114] nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
[ 13.730120] nvidia 0000:02:00.0: setting latency timer to 64
[ 13.730124] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 13.730324] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
[ 13.809044] af9015: tuner id:179 not supported, please report!
[ 13.809090] usbcore: registered new interface driver dvb_usb_af9015
[ 13.823074] type=1505 audit(1288114014.415:2): operation="profile_load" pid=706 name="/sbin/dhclient3"
[ 13.823272] type=1505 audit(1288114014.415:3): operation="profile_load" pid=706 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 13.823383] type=1505 audit(1288114014.415:4): operation="profile_load" pid=706 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.136099] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input7
[ 14.351826] type=1505 audit(1288114014.943:5): operation="profile_load" pid=887 name="/usr/share/gdm/guest-session/Xsession"
[ 14.353309] type=1505 audit(1288114014.947:6): operation="profile_replace" pid=893 name="/sbin/dhclient3"
[ 14.353517] type=1505 audit(1288114014.947:7): operation="profile_replace" pid=893 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.353633] type=1505 audit(1288114014.947:8): operation="profile_replace" pid=893 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.355780] type=1505 audit(1288114014.947:9): operation="profile_load" pid=896 name="/usr/bin/evince"
[ 14.358504] type=1505 audit(1288114014.951:10): operation="profile_load" pid=896 name="/usr/bin/evince-previewer"
[ 14.360112] type=1505 audit(1288114014.955:11): operation="profile_load" pid=896 name="/usr/bin/evince-thumbnailer"
[ 14.499151] alloc irq_desc for 27 on node -1
[ 14.499154] alloc kstat_irqs on node -1
[ 14.499161] forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X
το tvtime δίνει το παρακάτω σφάλμα
- Κώδικας: Επιλογή όλων
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/dionisis/.tvtime/tvtime.xml
videoinput: Cannot open capture device /dev/video0: No such file or directory
I/O warning : failed to load external entity "/home/dionisis/.tvtime/stationlist.xml"
station: No station file found, creating a new one.
Thank you for using tvtime.
δοκίμασα και με το w_scan να δημιουργήσω το αρχείο channels.conf αλλά
- Κώδικας: Επιλογή όλων
w_scan version 20091230 (compiled for DVB API 5.1)
using settings for GREECE
DVB aerial
DVB-T Europe
frontend_type DVB-T, channellist 4
output format czap/tzap/szap/xine
Info: using DVB adapter auto detection.
main:2911: FATAL: ***** NO USEABLE DVB CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.
δοκίμασα το Me Tv αλλά ζητούσε ή το αρχείο channels.conf ή τη ρύθμιση περιοχής (από Ελλάδα είχε μόνο Αθήνα)
το δημιούργησα από το post του malos:
- Κώδικας: Επιλογή όλων
ALPHA:674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:1150:1151:100
ALTER:674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:1250:1251:200
ANT1:674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:1350:1351:300
m.tv:674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:1450:1451:400
MEGA:682000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:1550:1551:500
SKAI:682000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:1650:1651:600
STAR:682000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:1750:1751:700
...:682000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:1850:1851:800
CINE+(ERT):690000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_NONE:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:512:640:1
SPORT+INFO(ERT):690000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_NONE:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:513:641:2
PRISMA+(ERT):690000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_NONE:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:514:670:3
PIK(ERT):690000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_NONE:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:515:643:4
αλλά δεν ανοίγει με το vlc - ανοίγει παράθυρο με τα παρακάτω σφάλματα
- Κώδικας: Επιλογή όλων
Your input can't be opened:
VLC is unable to open the MRL 'dvb://'. Check the log for details.
Your input can't be opened:
VLC is unable to open the MRL 'dvb://'. Check the log for details.
Your input can't be opened:
VLC is unable to open the MRL 'dvb://'. Check the log for details.
Your input can't be opened:
VLC is unable to open the MRL 'dvb://'. Check the log for details.
Your input can't be opened:
VLC is unable to open the MRL 'dvb://'. Check the log for details.
Your input can't be opened:
VLC is unable to open the MRL 'dvb://'. Check the log for details.
Your input can't be opened:
VLC is unable to open the MRL 'dvb://'. Check the log for details.
Your input can't be opened:
VLC is unable to open the MRL 'dvb://'. Check the log for details.
Your input can't be opened:
VLC is unable to open the MRL 'dvb://'. Check the log for details.
Your input can't be opened:
VLC is unable to open the MRL 'dvb://'. Check the log for details.
Your input can't be opened:
VLC is unable to open the MRL 'dvb://'. Check the log for details.
Your input can't be opened:
VLC is unable to open the MRL 'dvb://'. Check the log for details.
μπορεί κάποιος να με βοηθήσει;
ευχαριστώ
) Λοιπόν δούλεψε για 5 λεπτά και μετά πάλι τα ίδια. Άλλαξα θύρες usb και ξανά το έβλεπε και μετά κολλούσε. Ύστερα από πολλές προσπάθειες δεν το έβλεπε ούτε με την εντολή lsusb. Να πω εδώ ότι όταν κολλούσε και έτρεχα την lsusb δεν έβγαζε τίποτα και έμενε ξεκρέμαστη.