προβλημα με CRYPTO ReDi PC 50 USB

[nikpapazoglou]

γεια σε ολους και καλη χρονια .
εχω προβλημα με την καρτα tv CRYPTO ReDi PC 50 USB
διαβασα σχετικο θεμα εδω αλλα δεν μπορεσα να βγαλω ακρη.
δοκιμασα διαφορα προγραμματα για να δω tv αλλα τπτα.(mythtv kaffeine tv time)
μπορω να εχω την βοήθειά σας?

[the_eye]

Δώσε μας το αποτέλεσμα της εντολής στο τερματικό

Κώδικας: Επιλογή όλων

lsusb

και το

Κώδικας: Επιλογή όλων

dmesg

[nikpapazoglou]

Κώδικας: Επιλογή όλων

:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Κώδικας: Επιλογή όλων

[ 0.371670] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.371727] alloc irq_desc for 40 on node -1
[ 0.371729] alloc kstat_irqs on node -1
[ 0.371742] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.371856] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.371906] alloc irq_desc for 41 on node -1
[ 0.371908] alloc kstat_irqs on node -1
[ 0.371918] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.372049] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.372099] alloc irq_desc for 42 on node -1
[ 0.372101] alloc kstat_irqs on node -1
[ 0.372111] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.372240] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.372342] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.372449] intel_idle: MWAIT substates: 0x22220
[ 0.372451] intel_idle: does not run on family 6 model 15
[ 0.376229] ACPI: AC Adapter [C1BC] (on-line)
[ 0.376323] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.376330] ACPI: Sleep Button [C243]
[ 0.376381] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.376447] ACPI: Lid Switch [C23C]
[ 0.376500] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.376504] ACPI: Power Button [PWRF]
[ 0.376744] ACPI: Fan [C324] (off)
[ 0.376937] ACPI: Fan [C325] (off)
[ 0.377134] ACPI: Fan [C326] (off)
[ 0.377324] ACPI: Fan [C327] (off)
[ 0.377643] ACPI: acpi_idle registered with cpuidle
[ 0.396217] Monitor-Mwait will be used to enter C-1 state
[ 0.396279] Monitor-Mwait will be used to enter C-2 state
[ 0.396291] Marking TSC unstable due to TSC halts in idle
[ 0.403996] Switching to clocksource hpet
[ 0.437168] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.437179] ACPI: Thermal Zone [TZ0] (62 C)
[ 0.446088] Freeing initrd memory: 10508k freed
[ 0.452874] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.452890] ACPI: Thermal Zone [TZ1] (65 C)
[ 0.467562] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.467571] ACPI: Thermal Zone [TZ2] (50 C)
[ 0.477586] thermal LNXTHERM:04: registered as thermal_zone3
[ 0.477596] ACPI: Thermal Zone [TZ3] (29 C)
[ 0.481284] thermal LNXTHERM:05: registered as thermal_zone4
[ 0.481294] ACPI: Thermal Zone [TZ4] (55 C)
[ 0.481494] ERST: Table is not found!
[ 0.481733] isapnp: Scanning for PnP cards...
[ 0.487437] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.487561] ACPI: Battery Slot [C1BD] (battery absent)
[ 0.489246] brd: module loaded
[ 0.489859] loop: module loaded
[ 0.490067] ata_piix 0000:00:1f.1: version 2.13
[ 0.490088] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.490138] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.490257] scsi0 : ata_piix
[ 0.490341] scsi1 : ata_piix
[ 0.490879] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40a0 irq 14
[ 0.490883] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40a8 irq 15
[ 0.491255] Fixed MDIO Bus: probed
[ 0.491295] PPP generic driver version 2.4.2
[ 0.491338] tun: Universal TUN/TAP device driver, 1.6
[ 0.491340] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.491423] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.491446] alloc irq_desc for 20 on node -1
[ 0.491448] alloc kstat_irqs on node -1
[ 0.491456] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.491469] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.491473] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.491510] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.491534] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.491548] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.495427] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.495446] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4584000
[ 0.499515] ata2: port disabled. ignoring.
[ 0.508021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.508166] hub 1-0:1.0: USB hub found
[ 0.508173] hub 1-0:1.0: 8 ports detected
[ 0.508335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.508350] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.508372] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.508379] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.508383] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.508423] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.508454] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
[ 0.508590] hub 2-0:1.0: USB hub found
[ 0.508596] hub 2-0:1.0: 2 ports detected
[ 0.508664] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.508671] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.508675] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.508711] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.508750] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
[ 0.508877] hub 3-0:1.0: USB hub found
[ 0.508881] hub 3-0:1.0: 2 ports detected
[ 0.508951] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.508958] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.508962] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.509001] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.509039] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
[ 0.509168] hub 4-0:1.0: USB hub found
[ 0.509173] hub 4-0:1.0: 2 ports detected
[ 0.509242] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.509249] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.509253] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.509287] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.509325] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004080
[ 0.509491] hub 5-0:1.0: USB hub found
[ 0.509496] hub 5-0:1.0: 2 ports detected
[ 0.509647] PNP: PS/2 Controller [PNP0303:C21A,PNP0f13:C21B] at 0x60,0x64 irq 1,12
[ 0.511268] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.511959] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.511965] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.511969] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.511972] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.511975] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.512061] mice: PS/2 mouse device common for all mice
[ 0.512207] rtc_cmos 00:06: RTC can wake from S4
[ 0.512246] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.512279] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.512418] device-mapper: uevent: version 1.0.3
[ 0.512524] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.512596] device-mapper: multipath: version 1.1.1 loaded
[ 0.512599] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.512718] EISA: Probing bus 0 at eisa.0
[ 0.512725] Cannot allocate resource for EISA slot 1
[ 0.512727] Cannot allocate resource for EISA slot 2
[ 0.512729] Cannot allocate resource for EISA slot 3
[ 0.512732] Cannot allocate resource for EISA slot 4
[ 0.512734] Cannot allocate resource for EISA slot 5
[ 0.512736] Cannot allocate resource for EISA slot 6
[ 0.512738] Cannot allocate resource for EISA slot 7
[ 0.512744] EISA: Detected 0 cards.
[ 0.512885] cpuidle: using governor ladder
[ 0.512975] cpuidle: using governor menu
[ 0.513327] TCP cubic registered
[ 0.513471] NET: Registered protocol family 10
[ 0.513908] lo: Disabled Privacy Extensions
[ 0.514178] NET: Registered protocol family 17
[ 0.523100] Using IPI No-Shortcut mode
[ 0.523195] PM: Resume from disk failed.
[ 0.523211] registered taskstats version 1
[ 0.523580] Magic number: 11:691:197
[ 0.523638] acpi PNP0100:00: hash matches
[ 0.523684] rtc_cmos 00:06: setting system clock to 2011-01-25 21:09:41 UTC (1295989781)
[ 0.523688] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.523690] EDD information not available.
[ 0.536681] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.538049] ACPI: Battery Slot [C1BE] (battery present)
[ 0.661448] ata1.00: ATAPI: PIONEER DVDRW DVR-K17, 1.05, max MWDMA2
[ 0.677354] ata1.00: configured for MWDMA2
[ 0.836314] isapnp: No Plug & Play device found
[ 0.839255] scsi 0:0:0:0: CD-ROM PIONEER DVDRW DVR-K17 1.05 PQ: 0 ANSI: 5
[ 0.842088] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.842094] Uniform CD-ROM driver Revision: 3.20
[ 0.842275] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.842337] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.842424] Freeing unused kernel memory: 688k freed
[ 0.842897] Write protecting the kernel text: 4932k
[ 0.842959] Write protecting the kernel read-only data: 1980k
[ 0.864344] udev[84]: starting version 163
[ 0.976348] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 1.063587] ahci 0000:00:1f.2: version 3.0
[ 1.063613] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.070671] firewire_ohci 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.070773] alloc irq_desc for 43 on node -1
[ 1.070776] alloc kstat_irqs on node -1
[ 1.070791] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.070850] ahci: SSS flag set, parallel bus scan disabled
[ 1.070881] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.070886] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 1.070893] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.076446] scsi2 : ahci
[ 1.076635] scsi3 : ahci
[ 1.076725] scsi4 : ahci
[ 1.076814] scsi5 : ahci
[ 1.076955] ata3: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585100 irq 43
[ 1.076959] ata4: DUMMY
[ 1.076961] ata5: DUMMY
[ 1.076963] ata6: DUMMY
[ 1.118318] Initializing USB Mass Storage driver...
[ 1.118400] usb-storage 1-5:1.0: Quirks match for vid 3340 pid ffff: 400
[ 1.118428] scsi6 : usb-storage 1-5:1.0
[ 1.118534] usbcore: registered new interface driver usb-storage
[ 1.118537] USB Mass Storage support registered.
[ 1.124102] firewire_ohci: Added fw-ohci device 0000:02:06.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.124194] b44 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.145092] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 1.145106] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 1.145117] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 1.184130] ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
[ 1.184164] b44: b44.c:v2.0
[ 1.205077] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:a4:db:33:8e
[ 1.221066] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 1.355105] scsi7 : usb-storage 1-6:1.0
[ 1.568060] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.570604] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.570609] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.570789] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.570798] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.571268] ata3.00: ATA-7: FUJITSU MHV2120BH PL, 892C, max UDMA/100
[ 1.571275] ata3.00: 234441648 sectors, multi 16: LBA48
[ 1.576471] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.576475] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.576652] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.576660] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.577200] ata3.00: configured for UDMA/100
[ 1.595757] ata3.00: configured for UDMA/100
[ 1.595764] ata3: EH complete
[ 1.595995] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHV2120B 892C PQ: 0 ANSI: 5
[ 1.596190] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.596235] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.596354] sd 2:0:0:0: [sda] Write Protect is off
[ 1.596357] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.596381] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.596539] sda:
[ 1.597053] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 1.617287] sda1 sda2 sda3 <
[ 1.624173] firewire_core: created device fw0: GUID 00023f99294d110e, S400
[ 1.640136] sda5 >
[ 1.640556] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.040234] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.040240] EXT4-fs (sda1): write access will be enabled during recovery
[ 2.117184] scsi 6:0:0:0: Direct-Access Flash ROM PQ: 0 ANSI: 0 CCS
[ 2.117677] scsi 6:0:0:1: Direct-Access SDMMC PQ: 0 ANSI: 0 CCS
[ 2.118504] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.119158] sd 6:0:0:0: [sdb] 228352 2048-byte logical blocks: (467 MB/446 MiB)
[ 2.119622] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.119625] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 2.119628] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.119880] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 2.122129] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 2.122754] sd 6:0:0:0: [sdb] 228352 2048-byte logical blocks: (467 MB/446 MiB)
[ 2.123252] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.123258] sdb: sdb1 < sdb5 >
[ 2.137499] sd 6:0:0:0: [sdb] 228352 2048-byte logical blocks: (467 MB/446 MiB)
[ 2.138216] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.138220] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2.356930] scsi 7:0:0:0: Direct-Access Kingston DataTravelerMini 1.00 PQ: 0 ANSI: 2
[ 2.357667] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 2.358256] sd 7:0:0:0: [sdd] 8081408 512-byte logical blocks: (4.13 GB/3.85 GiB)
[ 2.358771] sd 7:0:0:0: [sdd] Write Protect is off
[ 2.358778] sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 2.358784] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 2.361144] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 2.361155] sdd: sdd1
[ 2.364498] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 2.364502] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 4.797076] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 4.797087] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 327
[ 4.797120] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 270
[ 4.797132] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 266
[ 4.797142] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 242
[ 4.797152] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 237
[ 4.797162] EXT4-fs (sda1): 5 orphan inodes deleted
[ 4.797165] EXT4-fs (sda1): recovery complete
[ 5.051404] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 30.272746] udev[425]: starting version 163
[ 30.334229] lp: driver loaded but no devices found
[ 30.342881] intel_rng: FWH not detected
[ 30.356950] Adding 4495356k swap on /dev/sda5. Priority:-1 extents:1 across:4495356k
[ 30.427879] leds_ss4200: no LED devices found
[ 30.447839] Linux agpgart interface v0.103
[ 30.548638] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 30.548767] [Firmware Bug]: _BCQ is used instead of _BQC
[ 30.550061] acpi device:01: registered as cooling_device6
[ 30.550392] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 30.550492] ACPI: Video Device [C085] (multi-head: yes rom: no post: no)
[ 30.550950] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 30.552474] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 30.555915] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 30.609282] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30a2]
[ 30.609306] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[ 30.609312] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[ 30.609315] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[ 30.609322] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01011b22, devctl 0x64
[ 30.683635] parport_pc 00:02: reported by Plug and Play ACPI
[ 30.683717] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 30.727046] cfg80211: Calling CRDA to update world regulatory domain
[ 30.727253] Bluetooth: Core ver 2.15
[ 30.727268] NET: Registered protocol family 31
[ 30.727270] Bluetooth: HCI device and connection manager initialized
[ 30.727273] Bluetooth: HCI socket layer initialized
[ 30.728087] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 30.730551] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 30.742804] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 30.761419] ppdev: user-space parallel port driver
[ 30.763547] [drm] Initialized drm 1.1.0 20060810
[ 30.772389] lp0: using parport0 (interrupt-driven).
[ 30.786234] usbcore: registered new interface driver btusb
[ 30.795150] cfg80211: World regulatory domain updated:
[ 30.795154] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 30.795158] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.795161] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 30.795164] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 30.795167] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.795170] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.840766] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18
[ 30.840771] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[ 30.840775] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 30.840786] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x7000-0x7fff]
[ 30.840790] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: excluding 0x7000-0x70ff 0x7400-0x74ff
[ 30.847974] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xf4100000-0xf43fffff]
[ 30.847978] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4100000-0xf43fffff: excluding 0xf4100000-0xf412ffff
[ 30.847995] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x60000000-0x63ffffff pref]
[ 30.848010] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x63ffffff: excluding 0x60000000-0x63ffffff
[ 30.856685] type=1400 audit(1295989811.830:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=781 comm="apparmor_parser"
[ 30.857426] type=1400 audit(1295989811.830:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=781 comm="apparmor_parser"
[ 30.857826] type=1400 audit(1295989811.830:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=781 comm="apparmor_parser"
[ 30.872387] type=1400 audit(1295989811.846:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=798 comm="apparmor_parser"
[ 30.873160] type=1400 audit(1295989811.846:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=798 comm="apparmor_parser"
[ 30.873565] type=1400 audit(1295989811.846:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=798 comm="apparmor_parser"
[ 30.876577] type=1400 audit(1295989811.850:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=794 comm="apparmor_parser"
[ 30.879906] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 30.879913] i915 0000:00:02.0: setting latency timer to 64
[ 30.896581] type=1400 audit(1295989811.870:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=808 comm="apparmor_parser"
[ 30.945742] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 30.945747] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 30.945835] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 30.945852] iwl3945 0000:10:00.0: setting latency timer to 64
[ 31.003023] [drm] set up 7M of stolen space
[ 31.014409] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[ 31.016470] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 31.017349] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 31.018079] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 31.018883] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xe0000-0xfffff
[ 31.018952] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 31.019019] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 31.019089] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 31.034444] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
[ 31.034447] Synaptics: Clickpad mode enabled
[ 31.034451] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 31.076497] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 31.108993] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 31.109015] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 31.109144] alloc irq_desc for 44 on node -1
[ 31.109147] alloc kstat_irqs on node -1
[ 31.109191] iwl3945 0000:10:00.0: irq 44 for MSI/MSI-X
[ 31.133662] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 31.134061] [drm] initialized overlay support
[ 31.191732] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.302909] type=1400 audit(1295989812.274:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=999 comm="apparmor_parser"
[ 31.312057] type=1400 audit(1295989812.286:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1001 comm="apparmor_parser"
[ 31.378817] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 31.453057] Skipping EDID probe due to cached edid
[ 31.466187] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9
[ 31.541670] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.799319] Console: switching to colour frame buffer device 160x50
[ 31.803211] fb0: inteldrmfb frame buffer device
[ 31.803213] drm: registered panic notifier
[ 31.803217] Slow work thread pool: Starting up
[ 31.803276] Slow work thread pool: Ready
[ 31.803288] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 31.807956] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 31.808020] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 31.808035] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 31.808104] alloc irq_desc for 45 on node -1
[ 31.808106] alloc kstat_irqs on node -1
[ 31.808121] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 31.808158] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 31.889041] Skipping EDID probe due to cached edid
[ 32.453980] Bluetooth: L2CAP ver 2.14
[ 32.453983] Bluetooth: L2CAP socket layer initialized
[ 32.538136] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 32.538139] Bluetooth: BNEP filters: protocol multicast
[ 32.813622] Bluetooth: SCO (Voice Link) ver 0.6
[ 32.813625] Bluetooth: SCO socket layer initialized
[ 33.533144] Skipping EDID probe due to cached edid
[ 33.861149] Skipping EDID probe due to cached edid
[ 33.980426] Bluetooth: RFCOMM TTY layer initialized
[ 33.980432] Bluetooth: RFCOMM socket layer initialized
[ 33.980435] Bluetooth: RFCOMM ver 1.11
[ 35.220072] Skipping EDID probe due to cached edid
[ 35.544062] Skipping EDID probe due to cached edid
[ 35.956095] Skipping EDID probe due to cached edid
[ 36.209528] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 36.277070] Skipping EDID probe due to cached edid
[ 38.295276] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 69.069089] Skipping EDID probe due to cached edid
[ 69.388068] Skipping EDID probe due to cached edid
[ 69.708065] Skipping EDID probe due to cached edid
[ 71.316058] Skipping EDID probe due to cached edid
[ 73.991840] wlan0: authenticate with 00:1f:9f:8e:82:2f (try 1)
[ 73.995434] wlan0: authenticated
[ 73.995939] wlan0: associate with 00:1f:9f:8e:82:2f (try 1)
[ 73.998605] wlan0: RX AssocResp from 00:1f:9f:8e:82:2f (capab=0x411 status=0 aid=1)
[ 73.998609] wlan0: associated
[ 74.002870] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 74.179934] padlock: VIA PadLock not detected.
[ 75.164079] Skipping EDID probe due to cached edid
[ 84.976032] wlan0: no IPv6 routers present
[ 185.880203] usb 1-5: USB disconnect, address 3
[ 785.572053] No probe response from AP 00:1f:9f:8e:82:2f after 500ms, disconnecting.
[ 785.608059] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 785.608067] cfg80211: Restoring regulatory settings
[ 785.608072] cfg80211: Calling CRDA to update world regulatory domain
[ 785.615245] cfg80211: World regulatory domain updated:
[ 785.615251] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 785.615258] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 785.615265] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 785.615271] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 785.615277] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 785.615283] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 788.317870] wlan0: authenticate with 00:1f:9f:8e:82:2f (try 1)
[ 788.516060] wlan0: authenticate with 00:1f:9f:8e:82:2f (try 2)
[ 788.716058] wlan0: authenticate with 00:1f:9f:8e:82:2f (try 3)
[ 788.916055] wlan0: authentication with 00:1f:9f:8e:82:2f timed out
[ 800.958533] wlan0: authenticate with 00:1f:9f:8e:82:2f (try 1)
[ 801.160058] wlan0: authenticate with 00:1f:9f:8e:82:2f (try 2)
[ 801.356063] wlan0: authenticate with 00:1f:9f:8e:82:2f (try 3)
[ 801.556036] wlan0: authentication with 00:1f:9f:8e:82:2f timed out
[ 804.632163] wlan0: authenticate with 00:1f:9f:8e:82:2f (try 1)
[ 804.832056] wlan0: authenticate with 00:1f:9f:8e:82:2f (try 2)
[ 805.032049] wlan0: authenticate with 00:1f:9f:8e:82:2f (try 3)
[ 805.232050] wlan0: authentication with 00:1f:9f:8e:82:2f timed out
[ 855.444905] wlan0: authenticate with 00:1f:9f:8e:82:2f (try 1)
[ 855.451012] wlan0: authenticated
[ 855.451068] wlan0: associate with 00:1f:9f:8e:82:2f (try 1)
[ 855.456906] wlan0: RX AssocResp from 00:1f:9f:8e:82:2f (capab=0x411 status=0 aid=1)
[ 855.456912] wlan0: associated
[ 4855.365040] usb 1-6: USB disconnect, address 4
[ 5005.764534] lo: Disabled Privacy Extensions

[the_eye]

Το είχες συνδεδεμένο όταν έδωσες τις εντολές ;

[nikpapazoglou]

κατεστρεψε ο γιος μου την καρτα
τωρα με την νεα καρτα επανω εχω:

Κώδικας: Επιλογή όλων

:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T USB2.0 stick
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


dmesg :

Κώδικας: Επιλογή όλων

t pref]
[ 0.355184] pci 0000:02:06.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
[ 0.355187] pci 0000:02:06.0: BAR 16: assigned [mem 0x68000000-0x6bffffff]
[ 0.355190] pci 0000:02:06.0: BAR 13: assigned [io 0x7000-0x70ff]
[ 0.355193] pci 0000:02:06.0: BAR 14: assigned [io 0x7400-0x74ff]
[ 0.355195] pci 0000:02:06.0: CardBus bridge to [bus 03-06]
[ 0.355198] pci 0000:02:06.0: bridge window [io 0x7000-0x70ff]
[ 0.355204] pci 0000:02:06.0: bridge window [io 0x7400-0x74ff]
[ 0.355210] pci 0000:02:06.0: bridge window [mem 0x60000000-0x63ffffff pref]
[ 0.355217] pci 0000:02:06.0: bridge window [mem 0x68000000-0x6bffffff]
[ 0.355223] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[ 0.355226] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff]
[ 0.355233] pci 0000:00:1e.0: bridge window [mem 0xf4100000-0xf43fffff]
[ 0.355239] pci 0000:00:1e.0: bridge window [mem 0x60000000-0x63ffffff pref]
[ 0.355263] alloc irq_desc for 16 on node -1
[ 0.355266] alloc kstat_irqs on node -1
[ 0.355276] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.355282] pci 0000:00:1c.0: setting latency timer to 64
[ 0.355294] alloc irq_desc for 17 on node -1
[ 0.355296] alloc kstat_irqs on node -1
[ 0.355300] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.355306] pci 0000:00:1c.1: setting latency timer to 64
[ 0.355318] alloc irq_desc for 19 on node -1
[ 0.355320] alloc kstat_irqs on node -1
[ 0.355324] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.355330] pci 0000:00:1c.3: setting latency timer to 64
[ 0.355341] pci 0000:00:1e.0: setting latency timer to 64
[ 0.355361] alloc irq_desc for 18 on node -1
[ 0.355363] alloc kstat_irqs on node -1
[ 0.355367] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.355376] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.355378] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.355381] pci_bus 0000:08: resource 0 [io 0x5000-0x5fff]
[ 0.355384] pci_bus 0000:08: resource 1 [mem 0x64000000-0x641fffff]
[ 0.355387] pci_bus 0000:08: resource 2 [mem 0x64200000-0x643fffff 64bit pref]
[ 0.355390] pci_bus 0000:10: resource 0 [io 0x6000-0x6fff]
[ 0.355392] pci_bus 0000:10: resource 1 [mem 0xf4000000-0xf40fffff]
[ 0.355395] pci_bus 0000:10: resource 2 [mem 0x64400000-0x645fffff 64bit pref]
[ 0.355398] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff]
[ 0.355401] pci_bus 0000:20: resource 1 [mem 0xf0000000-0xf3ffffff]
[ 0.355404] pci_bus 0000:20: resource 2 [mem 0x64600000-0x647fffff 64bit pref]
[ 0.355406] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
[ 0.355409] pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf43fffff]
[ 0.355412] pci_bus 0000:02: resource 2 [mem 0x60000000-0x63ffffff pref]
[ 0.355414] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.355417] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.355420] pci_bus 0000:03: resource 0 [io 0x7000-0x70ff]
[ 0.355422] pci_bus 0000:03: resource 1 [io 0x7400-0x74ff]
[ 0.355425] pci_bus 0000:03: resource 2 [mem 0x60000000-0x63ffffff pref]
[ 0.355428] pci_bus 0000:03: resource 3 [mem 0x68000000-0x6bffffff]
[ 0.355475] NET: Registered protocol family 2
[ 0.355556] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.355855] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.356484] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.356781] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.356784] TCP reno registered
[ 0.356787] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.356802] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.356905] NET: Registered protocol family 1
[ 0.356928] pci 0000:00:02.0: Boot video device
[ 0.357084] PCI: CLS 64 bytes, default 64
[ 0.357298] cpufreq-nforce2: No nForce2 chipset.
[ 0.357331] Scanning for low memory corruption every 60 seconds
[ 0.357488] audit: initializing netlink socket (disabled)
[ 0.357500] type=2000 audit(1296217731.352:1): initialized
[ 0.368667] highmem bounce pool size: 64 pages
[ 0.368673] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.370299] VFS: Disk quotas dquot_6.5.2
[ 0.370367] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.371025] fuse init (API version 7.14)
[ 0.371124] msgmni has been set to 1696
[ 0.371521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.371525] io scheduler noop registered
[ 0.371527] io scheduler deadline registered
[ 0.371541] io scheduler cfq registered (default)
[ 0.371682] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.371736] alloc irq_desc for 40 on node -1
[ 0.371739] alloc kstat_irqs on node -1
[ 0.371752] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.371864] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.371915] alloc irq_desc for 41 on node -1
[ 0.371917] alloc kstat_irqs on node -1
[ 0.371926] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.372043] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.372093] alloc irq_desc for 42 on node -1
[ 0.372095] alloc kstat_irqs on node -1
[ 0.372104] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.372232] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.372334] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.372440] intel_idle: MWAIT substates: 0x22220
[ 0.372443] intel_idle: does not run on family 6 model 15
[ 0.377037] ACPI: AC Adapter [C1BC] (off-line)
[ 0.377129] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.377135] ACPI: Sleep Button [C243]
[ 0.377185] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.377251] ACPI: Lid Switch [C23C]
[ 0.377303] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.377307] ACPI: Power Button [PWRF]
[ 0.377547] ACPI: Fan [C324] (off)
[ 0.377737] ACPI: Fan [C325] (off)
[ 0.377930] ACPI: Fan [C326] (off)
[ 0.378120] ACPI: Fan [C327] (off)
[ 0.378441] ACPI: acpi_idle registered with cpuidle
[ 0.395862] Monitor-Mwait will be used to enter C-1 state
[ 0.395919] Monitor-Mwait will be used to enter C-2 state
[ 0.396287] Monitor-Mwait will be used to enter C-3 state
[ 0.396299] Marking TSC unstable due to TSC halts in idle
[ 0.403672] Switching to clocksource hpet
[ 0.431161] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.431172] ACPI: Thermal Zone [TZ0] (26 C)
[ 0.445796] Freeing initrd memory: 10508k freed
[ 0.446348] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.446361] ACPI: Thermal Zone [TZ1] (31 C)
[ 0.461372] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.461385] ACPI: Thermal Zone [TZ2] (19 C)
[ 0.471222] thermal LNXTHERM:04: registered as thermal_zone3
[ 0.471232] ACPI: Thermal Zone [TZ3] (17 C)
[ 0.474927] thermal LNXTHERM:05: registered as thermal_zone4
[ 0.474936] ACPI: Thermal Zone [TZ4] (75 C)
[ 0.475133] ERST: Table is not found!
[ 0.475369] isapnp: Scanning for PnP cards...
[ 0.477075] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.478831] brd: module loaded
[ 0.479440] loop: module loaded
[ 0.479651] ata_piix 0000:00:1f.1: version 2.13
[ 0.479672] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.479722] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.479809] scsi0 : ata_piix
[ 0.479892] scsi1 : ata_piix
[ 0.480147] ACPI: Battery Slot [C1BD] (battery absent)
[ 0.480623] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40a0 irq 14
[ 0.480627] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40a8 irq 15
[ 0.481013] Fixed MDIO Bus: probed
[ 0.481050] PPP generic driver version 2.4.2
[ 0.481088] tun: Universal TUN/TAP device driver, 1.6
[ 0.481091] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.481173] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.481195] alloc irq_desc for 20 on node -1
[ 0.481197] alloc kstat_irqs on node -1
[ 0.481205] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.481218] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.481223] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.481269] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.481292] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.481306] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.485199] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.485373] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4584000
[ 0.489301] ata2: port disabled. ignoring.
[ 0.501021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.501180] hub 1-0:1.0: USB hub found
[ 0.501187] hub 1-0:1.0: 8 ports detected
[ 0.501285] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.501301] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.501324] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.501331] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.501335] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.501377] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.501407] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
[ 0.501536] hub 2-0:1.0: USB hub found
[ 0.501541] hub 2-0:1.0: 2 ports detected
[ 0.501608] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.501615] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.501619] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.501653] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.501691] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
[ 0.501819] hub 3-0:1.0: USB hub found
[ 0.501824] hub 3-0:1.0: 2 ports detected
[ 0.501915] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.501922] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.501925] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.501961] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.501999] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
[ 0.502129] hub 4-0:1.0: USB hub found
[ 0.502135] hub 4-0:1.0: 2 ports detected
[ 0.502203] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.502210] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.502214] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.502248] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.502286] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004080
[ 0.502416] hub 5-0:1.0: USB hub found
[ 0.502421] hub 5-0:1.0: 2 ports detected
[ 0.502570] PNP: PS/2 Controller [PNP0303:C21A,PNP0f13:C21B] at 0x60,0x64 irq 1,12
[ 0.504159] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.504939] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.504945] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.504974] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.505011] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.505037] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.505151] mice: PS/2 mouse device common for all mice
[ 0.507081] rtc_cmos 00:06: RTC can wake from S4
[ 0.507120] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.507156] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.507268] device-mapper: uevent: version 1.0.3
[ 0.507378] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.507446] device-mapper: multipath: version 1.1.1 loaded
[ 0.507449] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.507565] EISA: Probing bus 0 at eisa.0
[ 0.507572] Cannot allocate resource for EISA slot 1
[ 0.507575] Cannot allocate resource for EISA slot 2
[ 0.507577] Cannot allocate resource for EISA slot 3
[ 0.507579] Cannot allocate resource for EISA slot 4
[ 0.507582] Cannot allocate resource for EISA slot 5
[ 0.507584] Cannot allocate resource for EISA slot 6
[ 0.507586] Cannot allocate resource for EISA slot 7
[ 0.507592] EISA: Detected 0 cards.
[ 0.507750] cpuidle: using governor ladder
[ 0.507868] cpuidle: using governor menu
[ 0.508215] TCP cubic registered
[ 0.508355] NET: Registered protocol family 10
[ 0.508765] lo: Disabled Privacy Extensions
[ 0.509051] NET: Registered protocol family 17
[ 0.522704] ACPI: Battery Slot [C1BE] (battery present)
[ 0.527747] Using IPI No-Shortcut mode
[ 0.527844] PM: Resume from disk failed.
[ 0.527859] registered taskstats version 1
[ 0.528108] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.528414] Magic number: 11:271:482
[ 0.528514] rtc_cmos 00:06: setting system clock to 2011-01-28 12:28:52 UTC (1296217732)
[ 0.528517] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.528520] EDD information not available.
[ 0.665679] ata1.00: ATAPI: PIONEER DVDRW DVR-K17, 1.05, max MWDMA2
[ 0.697666] ata1.00: configured for MWDMA2
[ 0.829552] isapnp: No Plug & Play device found
[ 0.838682] scsi 0:0:0:0: CD-ROM PIONEER DVDRW DVR-K17 1.05 PQ: 0 ANSI: 5
[ 0.866531] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.866537] Uniform CD-ROM driver Revision: 3.20
[ 0.866716] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.866781] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.866872] Freeing unused kernel memory: 688k freed
[ 0.867339] Write protecting the kernel text: 4932k
[ 0.867400] Write protecting the kernel read-only data: 1980k
[ 0.888849] udev[86]: starting version 163
[ 1.063780] ahci 0000:00:1f.2: version 3.0
[ 1.063805] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.063861] alloc irq_desc for 43 on node -1
[ 1.063864] alloc kstat_irqs on node -1
[ 1.063879] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.063939] ahci: SSS flag set, parallel bus scan disabled
[ 1.063971] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.063976] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 1.063983] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.096795] scsi2 : ahci
[ 1.102327] scsi3 : ahci
[ 1.105071] scsi4 : ahci
[ 1.105420] b44 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.105448] scsi5 : ahci
[ 1.105591] ata3: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585100 irq 43
[ 1.105594] ata4: DUMMY
[ 1.105596] ata5: DUMMY
[ 1.105599] ata6: DUMMY
[ 1.124077] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 1.124090] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 1.124101] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 1.141083] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 1.164161] ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
[ 1.164199] b44: b44.c:v2.0
[ 1.164248] firewire_ohci 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.186100] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:a4:db:33:8e
[ 1.220122] firewire_ohci: Added fw-ohci device 0000:02:06.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.596063] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.598601] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.598606] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.598793] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.598801] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.599285] ata3.00: ATA-7: FUJITSU MHV2120BH PL, 892C, max UDMA/100
[ 1.599292] ata3.00: 234441648 sectors, multi 16: LBA48
[ 1.604517] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.604521] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.604692] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.604700] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.605222] ata3.00: configured for UDMA/100
[ 1.623812] ata3.00: configured for UDMA/100
[ 1.623818] ata3: EH complete
[ 1.624059] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHV2120B 892C PQ: 0 ANSI: 5
[ 1.624240] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.624342] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.624412] sd 2:0:0:0: [sda] Write Protect is off
[ 1.624415] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.624440] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.624596] sda: sda1 sda2 sda3 < sda5 >
[ 1.669145] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.720188] firewire_core: created device fw0: GUID 00023f99294d110e, S400
[ 2.124363] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.124368] EXT4-fs (sda1): write access will be enabled during recovery
[ 10.291432] EXT4-fs (sda1): recovery complete
[ 10.292020] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 17.216070] usb 1-6: new high speed USB device using ehci_hcd and address 3
[ 35.905595] udev[443]: starting version 163
[ 36.035156] Linux agpgart interface v0.103
[ 36.069686] lp: driver loaded but no devices found
[ 36.073331] Adding 4495356k swap on /dev/sda5. Priority:-1 extents:1 across:4495356k
[ 36.100495] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 36.101951] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 36.105653] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 36.105775] [Firmware Bug]: _BCQ is used instead of _BQC
[ 36.106956] acpi device:01: registered as cooling_device6
[ 36.107221] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 36.107280] ACPI: Video Device [C085] (multi-head: yes rom: no post: no)
[ 36.108623] intel_rng: FWH not detected
[ 36.118552] leds_ss4200: no LED devices found
[ 36.148118] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30a2]
[ 36.148141] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[ 36.148148] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[ 36.148151] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[ 36.148157] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01011b22, devctl 0x64
[ 36.194704] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 36.342258] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 36.346497] cfg80211: Calling CRDA to update world regulatory domain
[ 36.346713] Bluetooth: Core ver 2.15
[ 36.346753] NET: Registered protocol family 31
[ 36.346756] Bluetooth: HCI device and connection manager initialized
[ 36.346759] Bluetooth: HCI socket layer initialized
[ 36.349828] parport_pc 00:02: reported by Plug and Play ACPI
[ 36.349913] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 36.388996] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18
[ 36.389042] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[ 36.389048] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 36.389061] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x7000-0x7fff]
[ 36.389064] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: excluding 0x7000-0x70ff 0x7400-0x74ff
[ 36.396704] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xf4100000-0xf43fffff]
[ 36.396708] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4100000-0xf43fffff: excluding 0xf4100000-0xf412ffff
[ 36.396725] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x60000000-0x63ffffff pref]
[ 36.396728] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x63ffffff: excluding 0x60000000-0x63ffffff
[ 36.405854] [drm] Initialized drm 1.1.0 20060810
[ 36.407583] type=1400 audit(1296217768.372:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=781 comm="apparmor_parser"
[ 36.408374] type=1400 audit(1296217768.376:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=781 comm="apparmor_parser"
[ 36.408772] type=1400 audit(1296217768.376:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=781 comm="apparmor_parser"
[ 36.416039] cfg80211: World regulatory domain updated:
[ 36.416042] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 36.416046] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 36.416049] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 36.416052] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 36.416055] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 36.416058] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 36.431123] type=1400 audit(1296217768.396:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=794 comm="apparmor_parser"
[ 36.431757] HP WMI: Unknown key pressed - 3
[ 36.444184] lp0: using parport0 (interrupt-driven).
[ 36.447974] type=1400 audit(1296217768.412:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=797 comm="apparmor_parser"
[ 36.448752] type=1400 audit(1296217768.416:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=797 comm="apparmor_parser"
[ 36.449164] type=1400 audit(1296217768.416:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=797 comm="apparmor_parser"
[ 36.451214] ppdev: user-space parallel port driver
[ 36.483983] type=1400 audit(1296217768.452:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=808 comm="apparmor_parser"
[ 36.503896] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 36.503903] i915 0000:00:02.0: setting latency timer to 64
[ 36.515194] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
[ 36.515197] Synaptics: Clickpad mode enabled
[ 36.515201] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 36.547968] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 36.547972] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 36.548058] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 36.548073] iwl3945 0000:10:00.0: setting latency timer to 64
[ 36.556375] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 36.605513] [drm] set up 7M of stolen space
[ 36.608336] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 36.665029] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[ 36.667086] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 36.667961] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 36.668706] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 36.669511] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xe0000-0xfffff
[ 36.669578] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 36.669645] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 36.669713] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 36.712285] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 36.712290] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 36.712407] alloc irq_desc for 44 on node -1
[ 36.712410] alloc kstat_irqs on node -1
[ 36.712445] iwl3945 0000:10:00.0: irq 44 for MSI/MSI-X
[ 36.712941] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 36.713520] [drm] initialized overlay support
[ 36.722186] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 36.731114] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 36.731377] usbcore: registered new interface driver btusb
[ 36.787709] type=1400 audit(1296217768.752:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=974 comm="apparmor_parser"
[ 36.797363] type=1400 audit(1296217768.764:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=976 comm="apparmor_parser"
[ 37.019063] af9015: tuner id:177 not supported, please report!
[ 37.019135] usbcore: registered new interface driver dvb_usb_af9015
[ 37.029033] Skipping EDID probe due to cached edid
[ 37.372550] Console: switching to colour frame buffer device 160x50
[ 37.375620] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9
[ 37.376446] fb0: inteldrmfb frame buffer device
[ 37.376448] drm: registered panic notifier
[ 37.376453] Slow work thread pool: Starting up
[ 37.376512] Slow work thread pool: Ready
[ 37.376533] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 37.386501] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 37.386543] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 37.386555] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 37.386616] alloc irq_desc for 45 on node -1
[ 37.386619] alloc kstat_irqs on node -1
[ 37.386634] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 37.386671] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 37.457574] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 37.464655] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.508960] Skipping EDID probe due to cached edid
[ 37.804550] Bluetooth: L2CAP ver 2.14
[ 37.804553] Bluetooth: L2CAP socket layer initialized
[ 37.873894] usbcore: registered new interface driver hiddev
[ 37.873918] usbcore: registered new interface driver usbhid
[ 37.873920] usbhid: USB HID core driver
[ 38.088717] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.088721] Bluetooth: BNEP filters: protocol multicast
[ 38.629809] Bluetooth: SCO (Voice Link) ver 0.6
[ 38.629813] Bluetooth: SCO socket layer initialized
[ 38.881117] Skipping EDID probe due to cached edid
[ 39.373189] Skipping EDID probe due to cached edid
[ 39.442087] Bluetooth: RFCOMM TTY layer initialized
[ 39.442093] Bluetooth: RFCOMM socket layer initialized
[ 39.442096] Bluetooth: RFCOMM ver 1.11
[ 41.880071] Skipping EDID probe due to cached edid
[ 42.196089] Skipping EDID probe due to cached edid
[ 42.524069] Skipping EDID probe due to cached edid
[ 42.845072] Skipping EDID probe due to cached edid
[ 47.804782] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 52.677091] Skipping EDID probe due to cached edid
[ 52.996070] Skipping EDID probe due to cached edid
[ 53.320061] Skipping EDID probe due to cached edid
[ 54.724091] Skipping EDID probe due to cached edid
[ 57.559737] wlan0: authenticate with 00:1f:9f:8e:82:2f (try 1)
[ 57.561853] wlan0: authenticated
[ 57.563008] wlan0: associate with 00:1f:9f:8e:82:2f (try 1)
[ 57.567042] wlan0: RX AssocResp from 00:1f:9f:8e:82:2f (capab=0x411 status=0 aid=1)
[ 57.567049] wlan0: associated
[ 57.572326] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 58.264928] padlock: VIA PadLock not detected.
[ 58.905068] Skipping EDID probe due to cached edid
[ 68.248033] wlan0: no IPv6 routers present


[the_eye]

Αφού έχεις άλλη κάρτα κάνε άλλο θέμα και δώσε τα παραπάνω αποτελέσματα.

[nikpapazoglou]

οχι την ιδια καρτα αγορασα ξανα

[the_eye]

Οκ τότε.

Εγκατέστησε το πρόγραμμα MeTV και ψάξε κανάλια.

Ακόμα η κάρτα είναι ψηφιακής λήψης. Έχετε ψηφιακό σήμα στην Κομοτηνή ;

[nikpapazoglou]

πως το κανω εγκατασταση?
εχω δοκιμάσει με : mythtv,kaffeine και tvtime.

[the_eye]

Από το κέντρο λογισμικού.