Προβλημα σε Laptop Acer

[nizoti]

Καλησπερα σε ολους!Ειμαι νεο μελος και θελω να πω ενα μπραβο για την απιστευτη δουλεια που κανετε!
Στο παρασυνθημα τωρα!
Εχω ενα laptop Acer Aspire 5315 με Vista.
Αποφασισα λοιπον να τα βγαλω και να περασω στο ubuntu.
Το εκανα πριν μια εβδομαδα και ενω δουλευαν ολα αψογα δεν δουλευε το ανεμιστηρακι,με αποτελεσμα να σβηνει το laptop συνεχως.
Aναγκαστικά γυρισα παλι στο vista και το ανεμιστηρακι δουλευε.
Σημερα λοιπον αποφασισα να βαλω παλι ubuntu dual boot με το vista.
Το εκανα,αλλα και παλι μολις γυριζω στο ubuntu δε δουλευει το ανεμιστηρακι,ενω οταν παω στο vista δουλευει κανονικα!
Εχω το ubuntu 10.10,αν μπορει καποιος να βοηθησει και να μου πει γιατι γινεται αυτο θα με σωσει γιατι θελω να δουλευω μονο με το ubuntu!
Ευχαριστω εκ των προτερων!

[simosx]

Καλώς ήρθες στο φόρουμ της ελληνικής κοινότητας Ubuntu-gr!
Αν δε λειτουργεί το ανεμιστηράκι, τότε κατά πάσα πιθανότητα το πρόβλημα είναι με το BIOS που δεν παρέχει σωστές πληροφορίες για εξοικονόμηση ενέργειας, για το Linux.
Σε μια τέτοια κατάσταση, το πρώτο πράγμα που δοκιμάζουμε είναι μια αναβάθμιση του BIOS του υπολογιστή (μέσα στο BIOS υπάρχουν πληροφορίες για το ACPI, και γενικά για εξοικονόμηση ενέργειας).

[nizoti]

Ευχαριστω για τη γρηγορη απαντηση!
Θα προσπαθησω να δω τι μπορω να κανω!

[nizoti]

φιλε simosx,στα bios μου δεν εχει καμια τετοια πληροφορια οσο αφορα την acpi.Πηγα και στο official site της acer και βρηκα το bios update αλλα φανταζομαι δεν εχει σημασια γιατι ειναι απο τον 8/08 και εγω αγορασα το laptop τελη του 2008.Μαλιστα ξερω οτι ειναι και λιγο επικινδυνο ενα update των bios(ετσι μου εχουν πει τουλαχιστον).Τι να πω?Καμια αλλη ιδεα?

[the_eye]

Τρέξε σε κονσόλα την εντολή

Κώδικας: Επιλογή όλων

dmesg

και δώσε μας εδώ το αποτέλεσμα να δούμε αν υπάρχει κάποιο πρόβλημα.
Ακόμα δες στους οδηγούς
viewtopic.php?f=9&t=859
πως θα φτιάξεις την υπογραφή σου για να έχουμε ποιο πολλά στοιχεία να σε βοηθήσουμε.

[nizoti]

Καλησπερα φιλε The eye!Αφενος ευχαριστω για την βοηθεια και αφετερου εδωσα αυτη την εντολη και μου εβγαλε ολο αυτο....

Κώδικας: Επιλογή όλων

0.307212] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.307227] NetLabel: unlabeled traffic allowed by default
[ 0.307271] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.307279] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.307284] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.310027] Switching to clocksource tsc
[ 0.320935] AppArmor: AppArmor Filesystem Enabled
[ 0.320961] pnp: PnP ACPI init
[ 0.320992] ACPI: bus type pnp registered
[ 0.322365] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff]
[ 0.340299] pnp: PnP ACPI: found 9 devices
[ 0.340302] ACPI: ACPI bus type pnp unregistered
[ 0.340319] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.340322] system 00:01: [io 0x0610] has been reserved
[ 0.340325] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.340328] system 00:01: [io 0x0810-0x0817] has been reserved
[ 0.340337] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.340340] system 00:01: [io 0x0500-0x053f] has been reserved
[ 0.340344] system 00:01: [io 0xff2c-0xff2f] has been reserved
[ 0.340349] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.340352] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.340356] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.340359] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.340362] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.340366] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.340369] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.340373] system 00:01: [mem 0x32000000-0x320000ff] could not be reserved
[ 0.346593] pci 0000:00:02.1: BAR 0: assigned [mem 0x58400000-0x584fffff 64bit]
[ 0.346602] pci 0000:00:02.1: BAR 0: set to [mem 0x58400000-0x584fffff 64bit] (PCI address [0x58400000-0x584fffff]
[ 0.346606] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.346610] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.346618] pci 0000:00:1c.0: bridge window [mem 0x57300000-0x582fffff]
[ 0.346624] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[ 0.346633] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.346637] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.346645] pci 0000:00:1c.1: bridge window [mem 0x56300000-0x572fffff]
[ 0.346650] pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[ 0.346660] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.346664] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.346671] pci 0000:00:1c.2: bridge window [mem 0x55200000-0x562fffff]
[ 0.346677] pci 0000:00:1c.2: bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[ 0.346686] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.346690] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.346697] pci 0000:00:1c.3: bridge window [mem 0x54100000-0x551fffff]
[ 0.346703] pci 0000:00:1c.3: bridge window [mem 0x53000000-0x53ffffff 64bit pref]
[ 0.346712] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[ 0.346715] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.346722] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.346727] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.346750] alloc irq_desc for 16 on node -1
[ 0.346753] alloc kstat_irqs on node -1
[ 0.346760] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.346767] pci 0000:00:1c.0: setting latency timer to 64
[ 0.346779] alloc irq_desc for 17 on node -1
[ 0.346780] alloc kstat_irqs on node -1
[ 0.346785] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.346790] pci 0000:00:1c.1: setting latency timer to 64
[ 0.346802] alloc irq_desc for 18 on node -1
[ 0.346804] alloc kstat_irqs on node -1
[ 0.346808] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.346814] pci 0000:00:1c.2: setting latency timer to 64
[ 0.346825] alloc irq_desc for 19 on node -1
[ 0.346827] alloc kstat_irqs on node -1
[ 0.346831] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.346836] pci 0000:00:1c.3: setting latency timer to 64
[ 0.346846] pci 0000:00:1e.0: setting latency timer to 64
[ 0.346852] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.346855] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.346858] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.346860] pci_bus 0000:02: resource 1 [mem 0x57300000-0x582fffff]
[ 0.346863] pci_bus 0000:02: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[ 0.346866] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.346869] pci_bus 0000:04: resource 1 [mem 0x56300000-0x572fffff]
[ 0.346871] pci_bus 0000:04: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[ 0.346874] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.346877] pci_bus 0000:05: resource 1 [mem 0x55200000-0x562fffff]
[ 0.346879] pci_bus 0000:05: resource 2 [mem 0x52000000-0x52ffffff 64bit pref]
[ 0.346882] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
[ 0.346885] pci_bus 0000:06: resource 1 [mem 0x54100000-0x551fffff]
[ 0.346888] pci_bus 0000:06: resource 2 [mem 0x53000000-0x53ffffff 64bit pref]
[ 0.346890] pci_bus 0000:07: resource 4 [io 0x0000-0xffff]
[ 0.346893] pci_bus 0000:07: resource 5 [mem 0x00000000-0xffffffffffffffff]
[ 0.346939] NET: Registered protocol family 2
[ 0.347034] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.347522] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.348899] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.349628] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.349632] TCP reno registered
[ 0.349648] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.349665] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.349831] NET: Registered protocol family 1
[ 0.349859] pci 0000:00:02.0: Boot video device
[ 0.350299] PCI: CLS 0 bytes, default 64
[ 0.350593] Scanning for low memory corruption every 60 seconds
[ 0.350792] audit: initializing netlink socket (disabled)
[ 0.350807] type=2000 audit(1301675419.340:1): initialized
[ 0.368315] Trying to unpack rootfs image as initramfs...
[ 0.390538] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.400195] VFS: Disk quotas dquot_6.5.2
[ 0.400298] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.400984] fuse init (API version 7.14)
[ 0.401082] msgmni has been set to 1949
[ 0.410660] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.410665] io scheduler noop registered
[ 0.410667] io scheduler deadline registered
[ 0.410708] io scheduler cfq registered (default)
[ 0.410835] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.410890] alloc irq_desc for 40 on node -1
[ 0.410893] alloc kstat_irqs on node -1
[ 0.410909] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.411028] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.411079] alloc irq_desc for 41 on node -1
[ 0.411081] alloc kstat_irqs on node -1
[ 0.411091] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.411198] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.411248] alloc irq_desc for 42 on node -1
[ 0.411250] alloc kstat_irqs on node -1
[ 0.411260] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.411371] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.411423] alloc irq_desc for 43 on node -1
[ 0.411425] alloc kstat_irqs on node -1
[ 0.411434] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.411554] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.411728] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.411740] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.411742] _OSC request data:1 0 1f
[ 0.411875] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.411885] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.411887] _OSC request data:1 0 1f
[ 0.412016] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.412025] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.412027] _OSC request data:1 0 1f
[ 0.412155] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.412164] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.412166] _OSC request data:1 0 1f
[ 0.412311] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.412320] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.412322] _OSC request data:1 0 1f
[ 0.412448] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.412457] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.412459] _OSC request data:1 0 1f
[ 0.412584] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.412593] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.412595] _OSC request data:1 0 1f
[ 0.412719] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.412729] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.412731] _OSC request data:1 0 1f
[ 0.412752] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.412840] intel_idle: MWAIT substates: 0x1110
[ 0.412843] intel_idle: does not run on family 6 model 22
[ 0.414239] ACPI: AC Adapter [AC] (on-line)
[ 0.414340] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
[ 0.414347] ACPI: Power Button [PWRB]
[ 0.414395] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1
[ 0.414451] ACPI: Lid Switch [LID0]
[ 0.414515] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
[ 0.414520] ACPI: Sleep Button [SLPB]
[ 0.414571] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.414575] ACPI: Power Button [PWRF]
[ 0.414891] ACPI: acpi_idle registered with cpuidle
[ 0.420182] Monitor-Mwait will be used to enter C-1 state
[ 0.420241] Monitor-Mwait will be used to enter C-2 state
[ 0.430334] Monitor-Mwait will be used to enter C-3 state
[ 0.430355] Marking TSC unstable due to TSC halts in idle
[ 0.431905] Switching to clocksource hpet
[ 0.469215] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.469231] ACPI: Thermal Zone [TZ01] (65 C)
[ 0.469357] ERST: Table is not found!
[ 0.469699] Linux agpgart interface v0.103
[ 0.469728] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.471234] brd: module loaded
[ 0.471774] loop: module loaded
[ 0.472004] ata_piix 0000:00:1f.1: version 2.13
[ 0.472022] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.472071] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.480253] scsi0 : ata_piix
[ 0.480511] scsi1 : ata_piix
[ 0.481328] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50e0 irq 14
[ 0.481332] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50e8 irq 15
[ 0.481679] Fixed MDIO Bus: probed
[ 0.481719] PPP generic driver version 2.4.2
[ 0.481793] tun: Universal TUN/TAP device driver, 1.6
[ 0.481795] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.481900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.481929] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.481959] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.481964] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.482004] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.482043] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.485916] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.485942] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x58304c00
[ 0.500062] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.500242] hub 1-0:1.0: USB hub found
[ 0.500249] hub 1-0:1.0: 4 ports detected
[ 0.500344] alloc irq_desc for 23 on node -1
[ 0.500347] alloc kstat_irqs on node -1
[ 0.500358] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.500387] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.500391] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.500443] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.500486] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.504379] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.504402] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x58304800
[ 0.520381] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.520561] hub 2-0:1.0: USB hub found
[ 0.520568] hub 2-0:1.0: 6 ports detected
[ 0.520658] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.520675] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.520771] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.520783] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.520788] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.520840] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.520895] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050c0
[ 0.521034] hub 3-0:1.0: USB hub found
[ 0.521040] hub 3-0:1.0: 2 ports detected
[ 0.521114] alloc irq_desc for 21 on node -1
[ 0.521117] alloc kstat_irqs on node -1
[ 0.521125] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.521134] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.521138] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.521177] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.521217] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050a0
[ 0.521352] hub 4-0:1.0: USB hub found
[ 0.521358] hub 4-0:1.0: 2 ports detected
[ 0.521420] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.521428] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.521432] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.521471] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.521503] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
[ 0.521633] hub 5-0:1.0: USB hub found
[ 0.521638] hub 5-0:1.0: 2 ports detected
[ 0.521701] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.521709] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.521713] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.521758] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.521801] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
[ 0.521944] hub 6-0:1.0: USB hub found
[ 0.521949] hub 6-0:1.0: 2 ports detected
[ 0.522013] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.522021] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.522025] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.522066] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.522098] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[ 0.522228] hub 7-0:1.0: USB hub found
[ 0.522233] hub 7-0:1.0: 2 ports detected
[ 0.522353] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.595224] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.595238] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.595420] mice: PS/2 mouse device common for all mice
[ 0.597453] rtc_cmos 00:03: RTC can wake from S4
[ 0.597500] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.597536] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.597671] device-mapper: uevent: version 1.0.3
[ 0.597785] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.602933] device-mapper: multipath: version 1.1.1 loaded
[ 0.602939] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.607073] cpuidle: using governor ladder
[ 0.607128] cpuidle: using governor menu
[ 0.607444] TCP cubic registered
[ 0.607584] NET: Registered protocol family 10
[ 0.608068] lo: Disabled Privacy Extensions
[ 0.608261] NET: Registered protocol family 17
[ 0.608443] PM: Resume from disk failed.
[ 0.608458] registered taskstats version 1
[ 0.608907] Magic number: 7:236:539
[ 0.609050] rtc_cmos 00:03: setting system clock to 2011-04-01 16:30:19 UTC (1301675419)
[ 0.609054] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.609056] EDD information not available.
[ 0.624267] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.662041] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
[ 0.700520] ata1.00: configured for UDMA/33
[ 0.706159] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WP03 PQ: 0 ANSI: 5
[ 0.717668] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.717675] Uniform CD-ROM driver Revision: 3.20
[ 0.717827] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.717904] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.775966] Freeing initrd memory: 10740k freed
[ 0.783291] Freeing unused kernel memory: 908k freed
[ 0.783894] Write protecting the kernel read-only data: 10240k
[ 0.784069] Freeing unused kernel memory: 416k freed
[ 0.784480] Freeing unused kernel memory: 1644k freed
[ 0.800248] ACPI: Battery Slot [BAT0] (battery present)
[ 0.807436] udev[71]: starting version 163
[ 1.138530] tg3.c:v3.110 (April 9, 2010)
[ 1.138603] tg3 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.138620] tg3 0000:05:00.0: setting latency timer to 64
[ 1.154128] ahci 0000:00:1f.2: version 3.0
[ 1.154152] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.154203] alloc irq_desc for 44 on node -1
[ 1.154205] alloc kstat_irqs on node -1
[ 1.154220] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.154296] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x3 impl SATA mode
[ 1.154301] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[ 1.154307] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.191162] scsi2 : ahci
[ 1.191354] scsi3 : ahci
[ 1.191472] scsi4 : ahci
[ 1.191669] ata3: SATA max UDMA/133 abar m2048@0x58304000 port 0x58304100 irq 44
[ 1.191674] ata4: SATA max UDMA/133 abar m2048@0x58304000 port 0x58304180 irq 44
[ 1.191677] ata5: DUMMY
[ 1.302541] tg3 0000:05:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:6b:73:d6
[ 1.302546] tg3 0000:05:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 1.302550] tg3 0000:05:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.302553] tg3 0000:05:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.550060] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.550090] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.550997] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.581889] ata3.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
[ 1.581892] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.582954] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.583183] ata3.00: configured for UDMA/133
[ 1.600166] scsi 2:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 01.0 PQ: 0 ANSI: 5
[ 1.600336] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.600591] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.600652] sd 2:0:0:0: [sda] Write Protect is off
[ 1.600655] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.600681] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.600842] sda: sda1 sda2
[ 1.610939] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.234861] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 12.891176] udev[433]: starting version 163
[ 12.992987] lp: driver loaded but no devices found
[ 13.163939] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 13.164467] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 13.634294] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[ 13.759871] type=1400 audit(1301664632.640:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=738 comm="apparmor_parser"
[ 13.769165] type=1400 audit(1301664632.650:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=738 comm="apparmor_parser"
[ 13.769651] type=1400 audit(1301664632.650:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=738 comm="apparmor_parser"
[ 13.800587] cfg80211: Calling CRDA to update world regulatory domain
[ 13.864394] cfg80211: World regulatory domain updated:
[ 13.864399] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.864403] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.864407] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.864410] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.864413] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.864416] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.950140] [drm] Initialized drm 1.1.0 20060810
[ 14.023654] ath5k 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 14.023671] ath5k 0000:06:00.0: setting latency timer to 64
[ 14.023735] ath5k 0000:06:00.0: registered as 'phy0'
[ 14.575620] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.575627] i915 0000:00:02.0: setting latency timer to 64
[ 14.884148] alloc irq_desc for 45 on node -1
[ 14.884153] alloc kstat_irqs on node -1
[ 14.884165] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 14.884179] [drm] set up 7M of stolen space
[ 15.075292] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5
[ 15.113280] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[ 15.177451] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 15.177768] [drm] initialized overlay support
[ 15.800016] Skipping EDID probe due to cached edid
[ 15.843959] ath: EEPROM regdomain: 0x65
[ 15.843962] ath: EEPROM indicates we should expect a direct regpair map
[ 15.843966] ath: Country alpha2 being used: 00
[ 15.843968] ath: Regpair used: 0x65
[ 15.897547] phy0: Selected rate control algorithm 'minstrel'
[ 15.898141] Registered led device: ath5k-phy0::rx
[ 15.898160] Registered led device: ath5k-phy0::tx
[ 15.898165] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 15.968785] Adding 261116k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261116k
[ 16.015771] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[ 16.203572] Console: switching to colour frame buffer device 160x50
[ 16.206867] fb0: inteldrmfb frame buffer device
[ 16.206869] drm: registered panic notifier
[ 16.208929] Slow work thread pool: Starting up
[ 16.220496] Slow work thread pool: Ready
[ 16.336934] type=1400 audit(1301664635.220:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=960 comm="apparmor_parser"
[ 16.347982] type=1400 audit(1301664635.230:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=961 comm="apparmor_parser"
[ 16.348818] type=1400 audit(1301664635.230:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=961 comm="apparmor_parser"
[ 16.349270] type=1400 audit(1301664635.230:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=961 comm="apparmor_parser"
[ 16.363976] alloc irq_desc for 46 on node -1
[ 16.363981] alloc kstat_irqs on node -1
[ 16.364015] tg3 0000:05:00.0: irq 46 for MSI/MSI-X
[ 16.402540] type=1400 audit(1301664635.290:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=962 comm="apparmor_parser"
[ 16.423856] type=1400 audit(1301664635.310:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=962 comm="apparmor_parser"
[ 16.430921] type=1400 audit(1301664635.320:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=962 comm="apparmor_parser"
[ 16.439162] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.458873] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.520170] acpi device:39: registered as cooling_device1
[ 16.520485] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 16.520558] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 16.520588] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 16.521396] alloc irq_desc for 22 on node -1
[ 16.521400] alloc kstat_irqs on node -1
[ 16.521409] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 16.521474] alloc irq_desc for 47 on node -1
[ 16.521476] alloc kstat_irqs on node -1
[ 16.521489] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 16.521531] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.650118] Skipping EDID probe due to cached edid
[ 16.882176] ppdev: user-space parallel port driver
[ 17.060394] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
[ 17.370099] Skipping EDID probe due to cached edid
[ 17.930085] Skipping EDID probe due to cached edid
[ 18.820069] Skipping EDID probe due to cached edid
[ 19.280066] Skipping EDID probe due to cached edid
[ 19.770070] Skipping EDID probe due to cached edid
[ 20.230065] Skipping EDID probe due to cached edid
[ 21.672259] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
[ 44.540078] Skipping EDID probe due to cached edid
[ 45.000069] Skipping EDID probe due to cached edid
[ 45.460063] Skipping EDID probe due to cached edid
[ 45.920064] Skipping EDID probe due to cached edid
[ 47.340098] Skipping EDID probe due to cached edid
[ 48.607114] wlan0: authenticate with c8:64:c7:00:c3:34 (try 1)
[ 48.611116] wlan0: authenticated
[ 48.611147] wlan0: associate with c8:64:c7:00:c3:34 (try 1)
[ 48.619211] wlan0: RX AssocResp from c8:64:c7:00:c3:34 (capab=0x431 status=0 aid=1)
[ 48.619216] wlan0: associated
[ 48.619841] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 48.620377] cfg80211: Calling CRDA for country: GR
[ 48.672751] cfg80211: Received country IE:
[ 48.672757] cfg80211: Regulatory domain: GR
[ 48.672759] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 48.672763] (2402000 KHz - 2482000 KHz @ 40000 KHz), (10000 mBi, 2000 mBm)
[ 48.672765] cfg80211: CRDA thinks this should applied:
[ 48.672767] cfg80211: Regulatory domain: GR
[ 48.672769] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 48.672772] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 48.672775] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 48.672778] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 48.672781] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 48.672783] cfg80211: We intersect both of these and get:
[ 48.672785] cfg80211: Regulatory domain: 98
[ 48.672787] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 48.672789] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 48.672798] cfg80211: Current regulatory domain updated by AP to: GR
[ 48.672800] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 48.672802] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 49.050085] Skipping EDID probe due to cached edid
[ 51.990090] Skipping EDID probe due to cached edid
[ 58.990024] wlan0: no IPv6 routers present
[ 228.150079] Skipping EDID probe due to cached edid
nikos@ubuntu:~$


Αυτη την στιγμη,ενω το λογισμικο το εβγαλα και το ξαναεγκατεστησα,συνεχιζει να συμπεριφερεται με τον ιδιο τροπο.Το laptop σβηνει συνεχως.
Τωρα που το ξανανοιξα καταλαβα οταν αρχιζε να ζωματαει απο πανω στο πληκτρολογιο,το εκανα ενα restart και περιμενα εκει που πρεπει να διαλεξω λογισμικο.Δηλ. Vista η Ubuntu.Γιατι δουλευε ο ανεμιστηρας και περιμενα να κρυωσει .
Πηγα με το βελακι στο Ubuntu και περιμενα εκει για περιπου 5 λεπτα,ενο ο ανεμιστηρας εκανε υπερωριες!Μπηκα στο Ubuntu και δουλευει κανονικα!Και ο ανεμιστηρας!
Δουλεψα το λογισμικο για αρκετη ωρα και δουλεψε αψογα!Καμια δυσλειτουργεια παρατηρησα!
Εκανα παλι restart και αντε παλι τα ιδια!Πυρκαγια εχει παρει!Τι να πω??
Πηρα τηλ. και στην Acer.με συνδεσαν με το τεχνικο τμημα,τους εξηγησα τι συμβαινει και μου ειπαν οτι το Software δεν υποστηριζεται απο το hardware...κατι τετοιο.Και οτι δεν μου συνηστουν να κανω update το bios και αν το κανω με δικη μου ευθηνη μονο!Αυτα!Υποψιν...οτι στο vista δεν υπαρχει απολυτος κανενα προβλημα!

Οσο αφορα την υπογραφη μου θα το κανω εντος ολιγου γιατι δεν ξερω πως και πρεπει να διαβασω ολο αυτο το Link.
Eυχαριστω και συγνωμη για το μεγαλο post kαι αν εχω γραψει κατι ακαταλαβηστικο,ειμαι αρχαριος και προσπαθω με τις οδηγιες μεσω του forum να τα κανω ολα αυτα!

[the_eye]

Υπάρχουν κάποια λάθη

Κώδικας: Επιλογή όλων

[ 0.411728] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.411740] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.411742] _OSC request data:1 0 1f

Δες εδώ, από ότι φαίνεται το laptop αυτό έχει πρόβλημα στο linux
http://www.fugaz.net/2010/01/23/acer-as ... ue-solved/
http://ubuntuforums.org/showthread.php? ... ost4564578

[nizoti]

Ευχαριστω!Θα δω τι μπορω να κανω τωρα!

[emmsarris]

Μια αφελής ερώτηση, αλλά επειδή την έχει πατήσει φίλος μου, θερμαίνεται όταν δε δουλεύει το ανεμιστηράκι;
Μήπως μετά από λίγη ώρα χρήσης ξεκινάει να δουλεύει;

[Star_Light]

φιλε simosx,στα bios μου δεν εχει καμια τετοια πληροφορια οσο αφορα την acpi.Πηγα και στο official site της acer και βρηκα το bios update αλλα φανταζομαι δεν εχει σημασια γιατι ειναι απο τον 8/08 και εγω αγορασα το laptop τελη του 2008.Μαλιστα ξερω οτι ειναι και λιγο επικινδυνο ενα update των bios(ετσι μου εχουν πει τουλαχιστον).Τι να πω?Καμια αλλη ιδεα?

Επικυνδινο ειναι απο την στιγμη που εχεις βαλει το προγραμματακι που θα κανει την αναβαθμιση και εκει για καποιο λογο μεινεις χωρις ρευμα. Αν διακοπει η τροφοδοσια την στιγμη εκεινη ενδεχεται να μεινεις και χωρις μητρικη (αν δεν ειναι σιγουρο αυτο δηλαδη). Αν και προσφατα ακουσα πως η αναβαθμιση του BIOS δεν διαρκει αρκετα. Παρολαυτα αποτελει λεπτο σημειο σε καθε περιπτωση.

Μια αφελής ερώτηση, αλλά επειδή την έχει πατήσει φίλος μου, θερμαίνεται όταν δε δουλεύει το ανεμιστηράκι;
Μήπως μετά από λίγη ώρα χρήσης ξεκινάει να δουλεύει;

Αν καταλαβα καλα την ερωτηση... εξαρταται τι εξαρτηματα εχεις μεσα...(μνημες , καρτες γραφικων κτλπ) και ειδικοτερα η ταση αυτων. ΤΥπικο παραδειγμα αποτελουν οι μοναδες μνημης DDR-2 που λειτουργουν με ταση 1.8 V εναντι των 2.5 V των DDR πραγμα το οποιο μειωνει σημαντικα την θερμοτητα που παραγεται. Οποτε τυπικα αν δεν υπαρχει αυξημενη ζητηση ρευματος πχ απο μια καρτα γραφικων για καποιον που χρησιμοποιει το πι σι του για να παιζει παιχνιδια και το εχει εξοπλισει συμφωνα με αυτες τις προδιαγραφες τοτε και να μην δουλευει ενα ανεμιστηρακι ισως να μην αποτελει προβλημα. (ΣΤο τελευταιο δεν ειμαι σιγουρος , οποιος γνωριζει ας με διορθωσει)

Σε γενικες γραμμες ομως οταν δεν δουλευει το ανεμιστηρακι υπαρχει περιπτωση να προκληθει ζημια... γιατι αυτη ειναι η δουλεια του ανεμιστηρα να κανει απαγωγη θερμοτητας.