Πρόβλημα φωτεινότητας-Ubuntu 11.04

[clepto]

Καλησπέρα παιδιά,
έχω το ίδιο πρόβλημα που είχα και τις beta εκδόσεις από live usb...
δηλαδή καθόλου φωτεινότητα...αν αλλάξω την φωτεινότητα από το σύστημα δεν αλλάζει..δεν μεγαλώνει...
τι να κάνω;να το αναφέρω ως bug?επειδή όμως δεν ξέρω θα πρέπει να μου πείτε που να γράψω, τι να γράψω και τα λοιπά..!

[simosx]

Καλησπέρα παιδιά,
έχω το ίδιο πρόβλημα που είχα και τις beta εκδόσεις από live usb...
δηλαδή καθόλου φωτεινότητα...αν αλλάξω την φωτεινότητα από το σύστημα δεν αλλάζει..δεν μεγαλώνει...
τι να κάνω;να το αναφέρω ως bug?επειδή όμως δεν ξέρω θα πρέπει να μου πείτε που να γράψω, τι να γράψω και τα λοιπά..!

Εδώ είναι χρήσιμα τα dmesg και το Xorg.0.log (στο /var/log/).
Το dmesg για να φανούν τυχόν προβλήματα με ACPI. Και το Xorg.0.log θα αναφέρει αν η οθόνη δίνει σωστές πληροφορίες EDID.

Μπορείς να εκτελέσεις

Κώδικας: Επιλογή όλων

ubuntu-bug xorg

και να ακολουθήσεις τις οδηγίες. Θα δημιουργήσει μια αναφορά στο launchpad.
Για τίτλο, κάτι σαν «No brightness on LCD monitor (Acer Aspire 5732Z)».

[clepto]

το dmesg και Xorg.0.log μπορω να τα βρω απο Live usb ή πρεπει τις εντολες απο κανονικα;

[simosx]

το dmesg και Xorg.0.log μπορω να τα βρω απο Live usb ή πρεπει τις εντολες απο κανονικα;

Νομίζω ότι τα βρίσκεις και στο LiveUSB καθώς είναι σε λειτουργία. είναι και τα δύο αρχεία στο /var/log/

[clepto]

από Live usb
dmesg

Κώδικας: Επιλογή όλων

[ 1.387956] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 1.387960] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 1.387965] pci 0000:00:1c.1: bridge window [mem 0xd4600000-0xd56fffff]
[ 1.387973] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 1.388092] pci 0000:05:00.0: reg 10: [mem 0xd3500000-0xd353ffff 64bit]
[ 1.388102] pci 0000:05:00.0: reg 18: [io 0x1000-0x107f]
[ 1.388186] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.388192] pci 0000:05:00.0: PME# disabled
[ 1.396025] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 1.396032] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 1.396038] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd45fffff]
[ 1.396045] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 1.396130] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 1.396135] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.396140] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.396148] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.396151] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.396153] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.396156] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.396158] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 1.396185] pci_bus 0000:00: on NUMA node 0
[ 1.396199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.396628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 1.396729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 1.396829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 1.406556] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.406703] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.406845] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.406986] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 1.407127] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 1.407270] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 1.407413] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.407554] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.407626] HEST: Table is not found!
[ 1.407708] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.407723] vgaarb: loaded
[ 1.407880] SCSI subsystem initialized
[ 1.408000] libata version 3.00 loaded.
[ 1.408020] usbcore: registered new interface driver usbfs
[ 1.408032] usbcore: registered new interface driver hub
[ 1.408055] usbcore: registered new device driver usb
[ 1.408554] ACPI: WMI: Mapper loaded
[ 1.408556] PCI: Using ACPI for IRQ routing
[ 1.408559] PCI: pci_cache_line_size set to 64 bytes
[ 1.408692] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[ 1.408694] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 1.408697] reserve RAM buffer: 00000000bb96c000 - 00000000bbffffff
[ 1.408700] reserve RAM buffer: 00000000bba82000 - 00000000bbffffff
[ 1.408703] reserve RAM buffer: 00000000bbaec000 - 00000000bbffffff
[ 1.408705] reserve RAM buffer: 00000000bbb00000 - 00000000bbffffff
[ 1.408799] NetLabel: Initializing
[ 1.408801] NetLabel: domain hash size = 128
[ 1.408802] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.408814] NetLabel: unlabeled traffic allowed by default
[ 1.408848] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 1.408855] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.408861] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 2.128051] Switching to clocksource tsc
[ 2.141173] AppArmor: AppArmor Filesystem Enabled
[ 2.141204] pnp: PnP ACPI init
[ 2.141240] ACPI: bus type pnp registered
[ 2.244600] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x2fff]
[ 2.245757] pnp: PnP ACPI: found 9 devices
[ 2.245760] ACPI: ACPI bus type pnp unregistered
[ 2.245764] PnPBIOS: Disabled by ACPI PNP
[ 2.245777] system 00:01: [io 0x0600-0x060f] has been reserved
[ 2.245780] system 00:01: [io 0x0610] has been reserved
[ 2.245783] system 00:01: [io 0x0800-0x080f] has been reserved
[ 2.245785] system 00:01: [io 0x0810-0x0817] has been reserved
[ 2.245788] system 00:01: [io 0x0820-0x0823] has been reserved
[ 2.245790] system 00:01: [io 0x0400-0x047f] has been reserved
[ 2.245793] system 00:01: [io 0x0500-0x057f] has been reserved
[ 2.245796] system 00:01: [io 0xff2c-0xff2f] has been reserved
[ 2.245800] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 2.245803] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.245806] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 2.245809] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.245812] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.245815] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.245818] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 2.245821] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 2.281835] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 2.281842] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 2.281849] pci 0000:00:1c.0: bridge window [mem 0xd5700000-0xd66fffff]
[ 2.281854] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 2.281863] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 2.281866] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 2.281872] pci 0000:00:1c.1: bridge window [mem 0xd4600000-0xd56fffff]
[ 2.281877] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 2.281885] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 2.281889] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 2.281895] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd45fffff]
[ 2.281900] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 2.281908] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 2.281910] pci 0000:00:1e.0: bridge window [io disabled]
[ 2.281916] pci 0000:00:1e.0: bridge window [mem disabled]
[ 2.281920] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 2.281937] pci 0000:00:1c.0: enabling device (0001 -> 0003)
[ 2.281946] alloc irq_desc for 17 on node -1
[ 2.281948] alloc kstat_irqs on node -1
[ 2.281956] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.281964] pci 0000:00:1c.0: setting latency timer to 64
[ 2.281975] alloc irq_desc for 16 on node -1
[ 2.281976] alloc kstat_irqs on node -1
[ 2.281980] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.281985] pci 0000:00:1c.1: setting latency timer to 64
[ 2.281996] alloc irq_desc for 18 on node -1
[ 2.281998] alloc kstat_irqs on node -1
[ 2.282001] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.282006] pci 0000:00:1c.2: setting latency timer to 64
[ 2.282015] pci 0000:00:1e.0: setting latency timer to 64
[ 2.282020] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.282022] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.282025] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.282027] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[ 2.282030] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 2.282032] pci_bus 0000:02: resource 1 [mem 0xd5700000-0xd66fffff]
[ 2.282034] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 2.282037] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 2.282039] pci_bus 0000:04: resource 1 [mem 0xd4600000-0xd56fffff]
[ 2.282042] pci_bus 0000:04: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 2.282044] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff]
[ 2.282047] pci_bus 0000:05: resource 1 [mem 0xd3500000-0xd45fffff]
[ 2.282049] pci_bus 0000:05: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
[ 2.282052] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 2.282054] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 2.282056] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.282058] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfebfffff]
[ 2.282101] NET: Registered protocol family 2
[ 2.282175] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.282417] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.282873] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.283159] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.283161] TCP reno registered
[ 2.283165] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.283177] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.283299] NET: Registered protocol family 1
[ 2.283319] pci 0000:00:02.0: Boot video device
[ 2.316081] PCI: CLS 64 bytes, default 64
[ 2.316110] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 2.316113] Simple Boot Flag at 0x44 set to 0x1
[ 2.316297] cpufreq-nforce2: No nForce2 chipset.
[ 2.316325] Scanning for low memory corruption every 60 seconds
[ 2.316485] audit: initializing netlink socket (disabled)
[ 2.316496] type=2000 audit(1304072087.312:1): initialized
[ 2.326729] highmem bounce pool size: 64 pages
[ 2.326735] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.328219] VFS: Disk quotas dquot_6.5.2
[ 2.328285] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.328895] fuse init (API version 7.14)
[ 2.328985] msgmni has been set to 1657
[ 2.330707] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.330711] io scheduler noop registered
[ 2.330713] io scheduler deadline registered
[ 2.330728] io scheduler cfq registered (default)
[ 2.330851] pcieport 0000:00:1c.0: setting latency timer to 64
[ 2.330902] alloc irq_desc for 40 on node -1
[ 2.330904] alloc kstat_irqs on node -1
[ 2.330917] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 2.331025] pcieport 0000:00:1c.1: setting latency timer to 64
[ 2.331073] alloc irq_desc for 41 on node -1
[ 2.331074] alloc kstat_irqs on node -1
[ 2.331083] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 2.331188] pcieport 0000:00:1c.2: setting latency timer to 64
[ 2.331235] alloc irq_desc for 42 on node -1
[ 2.331237] alloc kstat_irqs on node -1
[ 2.331246] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 2.331362] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.331511] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.331603] intel_idle: MWAIT substates: 0x2220
[ 2.331605] intel_idle: does not run on family 6 model 23
[ 2.332056] ACPI: AC Adapter [AC] (off-line)
[ 2.332150] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0C:00/input/input0
[ 2.332156] ACPI: Power Button [PWRB]
[ 2.332202] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0D:00/input/input1
[ 2.332256] ACPI: Lid Switch [LID0]
[ 2.332299] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0E:00/input/input2
[ 2.332303] ACPI: Sleep Button [SLPB]
[ 2.332363] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.332366] ACPI: Power Button [PWRF]
[ 2.332712] ACPI: acpi_idle registered with cpuidle
[ 2.332947] Monitor-Mwait will be used to enter C-1 state
[ 2.332978] Monitor-Mwait will be used to enter C-2 state
[ 2.332984] Marking TSC unstable due to TSC halts in idle
[ 2.333075] Switching to clocksource hpet
[ 2.421804] Freeing initrd memory: 11144k freed
[ 2.515115] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.515124] ACPI: Thermal Zone [TZ01] (41 C)
[ 2.515218] ERST: Table is not found!
[ 2.515281] isapnp: Scanning for PnP cards...
[ 2.515592] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.517067] brd: module loaded
[ 2.517602] loop: module loaded
[ 2.518098] Fixed MDIO Bus: probed
[ 2.518131] PPP generic driver version 2.4.2
[ 2.518162] tun: Universal TUN/TAP device driver, 1.6
[ 2.518164] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.518241] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.518266] alloc irq_desc for 21 on node -1
[ 2.518268] alloc kstat_irqs on node -1
[ 2.518279] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 2.518294] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.518297] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.518344] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.518374] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.522264] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 2.522282] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xd6704c00
[ 2.536015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.536137] hub 1-0:1.0: USB hub found
[ 2.536142] hub 1-0:1.0: 2 ports detected
[ 2.536212] alloc irq_desc for 23 on node -1
[ 2.536214] alloc kstat_irqs on node -1
[ 2.536218] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.536229] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.536233] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.536265] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.536293] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.540181] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.540196] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd6704800
[ 2.556014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.556110] hub 2-0:1.0: USB hub found
[ 2.556114] hub 2-0:1.0: 8 ports detected
[ 2.556195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.556209] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.556232] alloc irq_desc for 20 on node -1
[ 2.556234] alloc kstat_irqs on node -1
[ 2.556239] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.556246] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.556249] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.556281] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.556318] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000050c0
[ 2.556429] hub 3-0:1.0: USB hub found
[ 2.556434] hub 3-0:1.0: 2 ports detected
[ 2.556496] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.556504] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.556508] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.556539] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.556567] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
[ 2.556678] hub 4-0:1.0: USB hub found
[ 2.556682] hub 4-0:1.0: 2 ports detected
[ 2.556740] alloc irq_desc for 19 on node -1
[ 2.556742] alloc kstat_irqs on node -1
[ 2.556747] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.556753] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.556756] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.556792] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 2.556828] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
[ 2.556941] hub 5-0:1.0: USB hub found
[ 2.556946] hub 5-0:1.0: 2 ports detected
[ 2.557010] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 2.557016] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.557019] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.557051] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 2.557077] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00005060
[ 2.557193] hub 6-0:1.0: USB hub found
[ 2.557197] hub 6-0:1.0: 2 ports detected
[ 2.557258] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.557265] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.557268] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.557299] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
[ 2.557336] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040
[ 2.557450] hub 7-0:1.0: USB hub found
[ 2.557454] hub 7-0:1.0: 2 ports detected
[ 2.557573] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 2.581364] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.581374] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.581432] mice: PS/2 mouse device common for all mice
[ 2.581582] rtc_cmos 00:03: RTC can wake from S4
[ 2.581618] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.581649] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.581759] device-mapper: uevent: version 1.0.3
[ 2.581873] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 2.581940] device-mapper: multipath: version 1.1.1 loaded
[ 2.581942] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.582051] EISA: Probing bus 0 at eisa.0
[ 2.582053] EISA: Cannot allocate resource for mainboard
[ 2.582055] Cannot allocate resource for EISA slot 1
[ 2.582057] Cannot allocate resource for EISA slot 2
[ 2.582059] Cannot allocate resource for EISA slot 3
[ 2.582061] Cannot allocate resource for EISA slot 4
[ 2.582063] Cannot allocate resource for EISA slot 5
[ 2.582065] Cannot allocate resource for EISA slot 6
[ 2.582067] Cannot allocate resource for EISA slot 7
[ 2.582068] Cannot allocate resource for EISA slot 8
[ 2.582070] EISA: Detected 0 cards.
[ 2.582191] cpuidle: using governor ladder
[ 2.582268] cpuidle: using governor menu
[ 2.582575] TCP cubic registered
[ 2.582702] NET: Registered protocol family 10
[ 2.583072] lo: Disabled Privacy Extensions
[ 2.583302] NET: Registered protocol family 17
[ 2.583863] Using IPI No-Shortcut mode
[ 2.583945] PM: Resume from disk failed.
[ 2.583956] registered taskstats version 1
[ 2.584355] Magic number: 7:394:225
[ 2.584450] rtc_cmos 00:03: setting system clock to 2011-04-29 10:14:47 UTC (1304072087)
[ 2.584453] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.584454] EDD information not available.
[ 2.604999] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.864029] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.869350] isapnp: No Plug & Play device found
[ 2.869393] Freeing unused kernel memory: 684k freed
[ 2.869770] Write protecting the kernel text: 4932k
[ 2.869820] Write protecting the kernel read-only data: 1976k
[ 2.891755] udev[86]: starting version 163
[ 2.975761] ahci 0000:00:1f.2: version 3.0
[ 2.975782] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.975832] alloc irq_desc for 43 on node -1
[ 2.975834] alloc kstat_irqs on node -1
[ 2.975846] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 2.975893] ahci: SSS flag set, parallel bus scan disabled
[ 2.975927] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 2.975930] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs
[ 2.975937] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.999694] atl1c 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.999710] atl1c 0000:05:00.0: setting latency timer to 64
[ 3.013046] Linux agpgart interface v0.103
[ 3.035515] scsi0 : ahci
[ 3.060600] scsi1 : ahci
[ 3.080631] scsi2 : ahci
[ 3.082262] scsi3 : ahci
[ 3.082452] ata1: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704100 irq 43
[ 3.082456] ata2: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704180 irq 43
[ 3.082459] ata3: DUMMY
[ 3.082460] ata4: DUMMY
[ 3.082862] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 3.083770] agpgart-intel 0000:00:00.0: detected 65532K stolen memory, trimming to 32768K
[ 3.084049] Initializing USB Mass Storage driver...
[ 3.084154] scsi4 : usb-storage 1-1:1.0
[ 3.084234] usbcore: registered new interface driver usb-storage
[ 3.084236] USB Mass Storage support registered.
[ 3.097192] atl1c 0000:05:00.0: version 1.0.0.2-NAPI
[ 3.110487] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 3.220062] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 3.564062] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.632057] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 3.840136] usbcore: registered new interface driver hiddev
[ 3.843098] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input5
[ 3.843204] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[ 3.847701] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.1/input/input6
[ 3.847815] generic-usb 0003:046D:C52F.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[ 3.847833] usbcore: registered new interface driver usbhid
[ 3.847835] usbhid: USB HID core driver
[ 3.932416] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 3.932419] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.935126] ata1.00: configured for UDMA/133
[ 3.948216] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
[ 3.948370] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.948487] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.948550] sd 0:0:0:0: [sda] Write Protect is off
[ 3.948553] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.948575] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.948621] ACPI: Battery Slot [BAT0] (battery present)
[ 3.948737] sda: sda1 sda2 < sda5 >
[ 3.989973] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.081119] scsi 4:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS
[ 4.081732] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 4.082481] sd 4:0:0:0: [sdb] 31342592 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 4.084225] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.084228] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4.084231] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.088100] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.088106] sdb: sdb1
[ 4.091851] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.091854] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 4.836087] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.838045] ata2.00: ATAPI: HL-DT-STDVDRAM GT31N, 1.00, max UDMA/100
[ 4.841657] ata2.00: configured for UDMA/100
[ 4.861737] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT31N 1.00 PQ: 0 ANSI: 5
[ 4.869784] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.869788] Uniform CD-ROM driver Revision: 3.20
[ 4.869894] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.869955] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 4.893078] [drm] Initialized drm 1.1.0 20060810
[ 4.917204] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.917210] i915 0000:00:02.0: setting latency timer to 64
[ 4.945423] [drm] detected 63M stolen memory, trimming to 32M
[ 4.945512] alloc irq_desc for 44 on node -1
[ 4.945514] alloc kstat_irqs on node -1
[ 4.945524] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 4.945537] [drm] set up 32M of stolen space
[ 4.945704] [drm:init_ring_common] *ERROR* render ring head not reset to zero ctl 00000000 head 02001000 tail 00000000 start 02001000
[ 4.945709] [drm:init_ring_common] *ERROR* render ring head forced to zero ctl 00000000 head 00000000 tail 00000000 start 02001000
[ 5.056076] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.376054] Skipping EDID probe due to cached edid
[ 5.727982] Console: switching to colour frame buffer device 170x48
[ 5.731779] fb0: inteldrmfb frame buffer device
[ 5.731781] drm: registered panic notifier
[ 5.731783] Slow work thread pool: Starting up
[ 5.731915] Slow work thread pool: Ready
[ 6.032138] acpi device:06: registered as cooling_device2
[ 6.032555] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 6.032605] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 6.032661] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.216059] Skipping EDID probe due to cached edid
[ 6.348918] Btrfs loaded
[ 6.354701] xor: automatically using best checksumming function: pIII_sse
[ 6.372008] pIII_sse : 8367.000 MB/sec
[ 6.372011] xor: using function: pIII_sse (8367.000 MB/sec)
[ 6.374604] device-mapper: dm-raid45: initialized v0.2594b
[ 6.548791] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.708372] aufs 2-standalone.tree-35-rcN-20100705
[ 6.722810] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 15.829496] Adding 9212924k swap on /dev/sda5. Priority:-1 extents:1 across:9212924k
[ 15.902081] udev[1400]: starting version 163
[ 16.194503] alloc irq_desc for 45 on node -1
[ 16.194507] alloc kstat_irqs on node -1
[ 16.194524] atl1c 0000:05:00.0: irq 45 for MSI/MSI-X
[ 16.195015] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.912198] Linux video capture interface: v2.00
[ 16.937202] uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103)
[ 16.953826] input: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input8
[ 16.953898] usbcore: registered new interface driver uvcvideo
[ 16.953900] USB Video Class driver (v0.1.0)
[ 17.309521] alloc irq_desc for 22 on node -1
[ 17.309525] alloc kstat_irqs on node -1
[ 17.309534] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 17.309595] alloc irq_desc for 46 on node -1
[ 17.309597] alloc kstat_irqs on node -1
[ 17.309609] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 17.309650] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.395605] hda_codec: ALC272X: BIOS auto-probing.
[ 17.414646] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[ 17.447017] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[ 17.713927] lp: driver loaded but no devices found
[ 17.775322] ppdev: user-space parallel port driver
[ 18.812645] Skipping EDID probe due to cached edid
[ 18.932624] Skipping EDID probe due to cached edid
[ 21.504558] Skipping EDID probe due to cached edid
[ 21.528576] Skipping EDID probe due to cached edid
[ 21.552568] Skipping EDID probe due to cached edid
[ 21.584068] Skipping EDID probe due to cached edid
[ 42.640565] Skipping EDID probe due to cached edid
[ 42.760053] Skipping EDID probe due to cached edid
[ 43.592552] Skipping EDID probe due to cached edid
[ 43.616540] Skipping EDID probe due to cached edid
[ 43.644037] Skipping EDID probe due to cached edid
[ 43.692043] Skipping EDID probe due to cached edid
[ 43.952715] Skipping EDID probe due to cached edid
[ 44.840585] Skipping EDID probe due to cached edid
[ 49.404527] Skipping EDID probe due to cached edid
[ 758.228081] Skipping EDID probe due to cached edid
[ 1539.811012] ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[ 1539.811020] ata1: irq_stat 0x00400000, PHY RDY changed
[ 1539.811025] ata1: SError: { PHYRdyChg CommWake }
[ 1539.811035] ata1: hard resetting link
[ 1540.696046] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1540.748727] ata1.00: configured for UDMA/133
[ 1540.748735] ata1: EH complete
[ 1839.260548] Skipping EDID probe due to cached edid


xorg.0.log

Κώδικας: Επιλογή όλων

[ 42.590]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 42.590] X Protocol Version 11, Revision 0
[ 42.590] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[ 42.590] Current Operating System: Linux ubuntu 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 i686
[ 42.590] Kernel command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[ 42.590] Build Date: 16 September 2010 05:39:22PM
[ 42.591] xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support)
[ 42.591] Current version of pixman: 0.18.4
[ 42.591] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 42.591] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 42.591] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 29 10:15:27 2011
[ 42.591] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 42.591] (==) No Layout section. Using the first Screen section.
[ 42.591] (==) No screen section available. Using defaults.
[ 42.591] (**) |-->Screen "Default Screen Section" (0)
[ 42.591] (**) | |-->Monitor "<default monitor>"
[ 42.592] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 42.592] (==) Automatically adding devices
[ 42.592] (==) Automatically enabling devices
[ 42.592] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 42.592] Entry deleted from font path.
[ 42.592] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 42.592] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 42.592] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 42.592] (II) Loader magic: 0x81f8e00
[ 42.592] (II) Module ABI versions:
[ 42.592] X.Org ANSI C Emulation: 0.4
[ 42.592] X.Org Video Driver: 8.0
[ 42.592] X.Org XInput driver : 11.0
[ 42.592] X.Org Server Extension : 4.0
[ 42.593] (--) PCI:*(0:0:2:0) 8086:2a42:1025:0212 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000050f0/8
[ 42.593] (--) PCI: (0:0:2:1) 8086:2a43:1025:0212 rev 9, Mem @ 0xd3400000/1048576
[ 42.593] (II) Open ACPI successful (/var/run/acpid.socket)
[ 42.593] (II) LoadModule: "extmod"
[ 42.594] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 42.594] (II) Module extmod: vendor="X.Org Foundation"
[ 42.594] compiled for 1.9.0, module version = 1.0.0
[ 42.594] Module class: X.Org Server Extension
[ 42.594] ABI class: X.Org Server Extension, version 4.0
[ 42.594] (II) Loading extension MIT-SCREEN-SAVER
[ 42.594] (II) Loading extension XFree86-VidModeExtension
[ 42.594] (II) Loading extension XFree86-DGA
[ 42.594] (II) Loading extension DPMS
[ 42.594] (II) Loading extension XVideo
[ 42.594] (II) Loading extension XVideo-MotionCompensation
[ 42.594] (II) Loading extension X-Resource
[ 42.594] (II) LoadModule: "dbe"
[ 42.595] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 42.595] (II) Module dbe: vendor="X.Org Foundation"
[ 42.595] compiled for 1.9.0, module version = 1.0.0
[ 42.595] Module class: X.Org Server Extension
[ 42.595] ABI class: X.Org Server Extension, version 4.0
[ 42.595] (II) Loading extension DOUBLE-BUFFER
[ 42.595] (II) LoadModule: "glx"
[ 42.596] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 42.596] (II) Module glx: vendor="X.Org Foundation"
[ 42.596] compiled for 1.9.0, module version = 1.0.0
[ 42.596] ABI class: X.Org Server Extension, version 4.0
[ 42.596] (==) AIGLX enabled
[ 42.596] (II) Loading extension GLX
[ 42.596] (II) LoadModule: "record"
[ 42.596] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 42.596] (II) Module record: vendor="X.Org Foundation"
[ 42.596] compiled for 1.9.0, module version = 1.13.0
[ 42.596] Module class: X.Org Server Extension
[ 42.596] ABI class: X.Org Server Extension, version 4.0
[ 42.596] (II) Loading extension RECORD
[ 42.597] (II) LoadModule: "dri"
[ 42.597] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 42.597] (II) Module dri: vendor="X.Org Foundation"
[ 42.597] compiled for 1.9.0, module version = 1.0.0
[ 42.597] ABI class: X.Org Server Extension, version 4.0
[ 42.597] (II) Loading extension XFree86-DRI
[ 42.597] (II) LoadModule: "dri2"
[ 42.598] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 42.598] (II) Module dri2: vendor="X.Org Foundation"
[ 42.598] compiled for 1.9.0, module version = 1.2.0
[ 42.598] ABI class: X.Org Server Extension, version 4.0
[ 42.598] (II) Loading extension DRI2
[ 42.598] (==) Matched intel as autoconfigured driver 0
[ 42.598] (==) Matched vesa as autoconfigured driver 1
[ 42.598] (==) Matched fbdev as autoconfigured driver 2
[ 42.598] (==) Assigned the driver to the xf86ConfigLayout
[ 42.598] (II) LoadModule: "intel"
[ 42.598] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 42.599] (II) Module intel: vendor="X.Org Foundation"
[ 42.599] compiled for 1.9.0, module version = 2.12.0
[ 42.599] Module class: X.Org Video Driver
[ 42.599] ABI class: X.Org Video Driver, version 8.0
[ 42.599] (II) LoadModule: "vesa"
[ 42.599] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 42.599] (II) Module vesa: vendor="X.Org Foundation"
[ 42.599] compiled for 1.8.99.905, module version = 2.3.0
[ 42.599] Module class: X.Org Video Driver
[ 42.599] ABI class: X.Org Video Driver, version 8.0
[ 42.599] (II) LoadModule: "fbdev"
[ 42.599] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 42.600] (II) Module fbdev: vendor="X.Org Foundation"
[ 42.600] compiled for 1.8.99.905, module version = 0.4.2
[ 42.600] ABI class: X.Org Video Driver, version 8.0
[ 42.600] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 42.600] (II) VESA: driver for VESA chipsets: vesa
[ 42.600] (II) FBDEV: driver for framebuffer: fbdev
[ 42.600] (++) using VT number 7

[ 42.600] (WW) Falling back to old probe method for vesa
[ 42.600] (WW) Falling back to old probe method for fbdev
[ 42.600] (II) Loading sub module "fbdevhw"
[ 42.600] (II) LoadModule: "fbdevhw"
[ 42.601] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 42.601] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 42.601] compiled for 1.9.0, module version = 0.0.2
[ 42.601] ABI class: X.Org Video Driver, version 8.0
[ 42.603] drmOpenDevice: node name is /dev/dri/card0
[ 42.603] drmOpenDevice: open result is 9, (OK)
[ 42.624] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 42.624] drmOpenDevice: node name is /dev/dri/card0
[ 42.624] drmOpenDevice: open result is 9, (OK)
[ 42.624] drmOpenByBusid: drmOpenMinor returns 9
[ 42.624] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 42.624] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 42.624] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 42.624] (==) intel(0): RGB weight 888
[ 42.624] (==) intel(0): Default visual is TrueColor
[ 42.624] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 42.624] (--) intel(0): Chipset: "GM45"
[ 42.624] (==) intel(0): video overlay key set to 0x101fe
[ 42.640] (II) intel(0): Output VGA1 has no monitor section
[ 42.640] (II) intel(0): Output LVDS1 has no monitor section
[ 42.640] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 42.745] (II) intel(0): Output DP1 has no monitor section
[ 42.760] (II) intel(0): EDID for output VGA1
[ 42.760] (II) intel(0): EDID for output LVDS1
[ 42.760] (II) intel(0): Manufacturer: SEC Model: 3046 Serial#: 0
[ 42.760] (II) intel(0): Year: 2008 Week: 0
[ 42.760] (II) intel(0): EDID Version: 1.3
[ 42.760] (II) intel(0): Digital Display Input
[ 42.760] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 42.760] (II) intel(0): Gamma: 2.20
[ 42.760] (II) intel(0): No DPMS capabilities specified
[ 42.760] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 42.760] (II) intel(0): First detailed timing is preferred mode
[ 42.760] (II) intel(0): redX: 0.620 redY: 0.355 greenX: 0.300 greenY: 0.580
[ 42.760] (II) intel(0): blueX: 0.150 blueY: 0.090 whiteX: 0.313 whiteY: 0.329
[ 42.760] (II) intel(0): Manufacturer's mask: 0
[ 42.760] (II) intel(0): Supported detailed timing:
[ 42.760] (II) intel(0): clock: 72.3 MHz Image Size: 344 x 193 mm
[ 42.760] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 42.760] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0
[ 42.760] (II) intel(0): Unknown vendor-specific block f
[ 42.760] (II) intel(0): SAMSUNG
[ 42.760] (II) intel(0): 156AT01-A01
[ 42.760] (II) intel(0): EDID (in hex):
[ 42.760] (II) intel(0): 00ffffffffffff004ca3463000000000
[ 42.760] (II) intel(0): 00120103802213780ace859e5b4c9426
[ 42.760] (II) intel(0): 17505400000001010101010101010101
[ 42.760] (II) intel(0): 010101010101411c56a0500016303020
[ 42.760] (II) intel(0): 250058c1100000190000000f00000000
[ 42.760] (II) intel(0): 00000000001eb4027400000000fe0053
[ 42.760] (II) intel(0): 414d53554e470a2020202020000000fe
[ 42.760] (II) intel(0): 00313536415430312d4130310a2000f1
[ 42.760] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 42.760] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 42.760] (II) intel(0): Printing probed modes for output LVDS1
[ 42.760] (II) intel(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 42.760] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 42.760] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 42.761] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 42.761] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 42.761] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 42.761] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 42.766] (II) intel(0): EDID for output DP1
[ 42.766] (II) intel(0): Output VGA1 disconnected
[ 42.766] (II) intel(0): Output LVDS1 connected
[ 42.766] (II) intel(0): Output DP1 disconnected
[ 42.766] (II) intel(0): Using exact sizes for initial modes
[ 42.766] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 42.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 42.766] (II) intel(0): Kernel page flipping support detected, but forcibly disabled.
[ 42.766] (==) intel(0): DPI set to (96, 96)
[ 42.766] (II) Loading sub module "fb"
[ 42.766] (II) LoadModule: "fb"
[ 42.766] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 42.767] (II) Module fb: vendor="X.Org Foundation"
[ 42.767] compiled for 1.9.0, module version = 1.0.0
[ 42.767] ABI class: X.Org ANSI C Emulation, version 0.4
[ 42.767] (II) UnloadModule: "vesa"
[ 42.767] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 42.767] (II) UnloadModule: "fbdev"
[ 42.767] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 42.767] (II) UnloadModule: "fbdevhw"
[ 42.767] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
[ 42.767] (==) Depth 24 pixmap format is 32 bpp
[ 42.767] (II) intel(0): [DRI2] Setup complete
[ 42.767] (II) intel(0): [DRI2] DRI driver: i965
[ 42.767] (**) intel(0): Tiling enabled
[ 42.767] (**) intel(0): SwapBuffers wait enabled
[ 42.767] (==) intel(0): VideoRam: 262144 KB
[ 42.767] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 42.779] (II) UXA(0): Driver registered support for the following operations:
[ 42.779] (II) solid
[ 42.779] (II) copy
[ 42.779] (II) composite (RENDER acceleration)
[ 42.779] (II) put_image
[ 42.779] (II) get_image
[ 42.779] (==) intel(0): Backing store disabled
[ 42.779] (==) intel(0): Silken mouse enabled
[ 42.779] (II) intel(0): Initializing HW Cursor
[ 42.816] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 42.817] (==) intel(0): DPMS enabled
[ 42.817] (==) intel(0): Intel XvMC decoder enabled
[ 42.817] (II) intel(0): Set up textured video
[ 42.817] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 42.818] (II) intel(0): direct rendering: DRI2 Enabled
[ 42.818] (--) RandR disabled
[ 42.818] (II) Initializing built-in extension Generic Event Extension
[ 42.818] (II) Initializing built-in extension SHAPE
[ 42.818] (II) Initializing built-in extension MIT-SHM
[ 42.818] (II) Initializing built-in extension XInputExtension
[ 42.818] (II) Initializing built-in extension XTEST
[ 42.818] (II) Initializing built-in extension BIG-REQUESTS
[ 42.818] (II) Initializing built-in extension SYNC
[ 42.818] (II) Initializing built-in extension XKEYBOARD
[ 42.818] (II) Initializing built-in extension XC-MISC
[ 42.818] (II) Initializing built-in extension SECURITY
[ 42.818] (II) Initializing built-in extension XINERAMA
[ 42.818] (II) Initializing built-in extension XFIXES
[ 42.818] (II) Initializing built-in extension RENDER
[ 42.818] (II) Initializing built-in extension RANDR
[ 42.818] (II) Initializing built-in extension COMPOSITE
[ 42.818] (II) Initializing built-in extension DAMAGE
[ 42.818] (II) Initializing built-in extension GESTURE
[ 42.833] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 42.833] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 42.833] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 42.833] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 42.833] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 42.833] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[ 42.833] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 42.833] (II) intel(0): Setting screen physical size to 361 x 203
[ 42.852] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 42.863] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 42.863] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 42.863] (II) LoadModule: "evdev"
[ 42.864] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 42.864] (II) Module evdev: vendor="X.Org Foundation"
[ 42.864] compiled for 1.9.0, module version = 2.3.2
[ 42.864] Module class: X.Org XInput Driver
[ 42.864] ABI class: X.Org XInput driver, version 11.0
[ 42.864] (**) Power Button: always reports core events
[ 42.864] (**) Power Button: Device: "/dev/input/event3"
[ 42.880] (II) Power Button: Found keys
[ 42.880] (II) Power Button: Configuring as keyboard
[ 42.880] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 42.880] (**) Option "xkb_rules" "evdev"
[ 42.880] (**) Option "xkb_model" "evdev"
[ 42.880] (**) Option "xkb_layout" "us,gr"
[ 42.880] (**) Option "xkb_variant" ","
[ 42.880] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 42.882] (II) XKB: generating xkmfile /var/lib/xkb/server-0784873EABBE2F3F8DCDEC70A37F488F93ECB155.xkm
[ 42.908] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 42.908] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 42.908] (**) Video Bus: always reports core events
[ 42.908] (**) Video Bus: Device: "/dev/input/event7"
[ 42.920] (II) Video Bus: Found keys
[ 42.920] (II) Video Bus: Configuring as keyboard
[ 42.920] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 42.920] (**) Option "xkb_rules" "evdev"
[ 42.920] (**) Option "xkb_model" "evdev"
[ 42.920] (**) Option "xkb_layout" "us,gr"
[ 42.920] (**) Option "xkb_variant" ","
[ 42.920] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 42.921] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 42.921] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 42.921] (**) Power Button: always reports core events
[ 42.921] (**) Power Button: Device: "/dev/input/event0"
[ 42.932] (II) Power Button: Found keys
[ 42.932] (II) Power Button: Configuring as keyboard
[ 42.932] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 42.932] (**) Option "xkb_rules" "evdev"
[ 42.932] (**) Option "xkb_model" "evdev"
[ 42.932] (**) Option "xkb_layout" "us,gr"
[ 42.932] (**) Option "xkb_variant" ","
[ 42.932] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 42.933] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 42.933] (II) No input driver/identifier specified (ignoring)
[ 42.933] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 42.933] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 42.933] (**) Sleep Button: always reports core events
[ 42.933] (**) Sleep Button: Device: "/dev/input/event2"
[ 42.944] (II) Sleep Button: Found keys
[ 42.944] (II) Sleep Button: Configuring as keyboard
[ 42.944] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 42.944] (**) Option "xkb_rules" "evdev"
[ 42.944] (**) Option "xkb_model" "evdev"
[ 42.944] (**) Option "xkb_layout" "us,gr"
[ 42.944] (**) Option "xkb_variant" ","
[ 42.944] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 42.949] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 42.949] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 42.949] (**) Logitech USB Receiver: always reports core events
[ 42.949] (**) Logitech USB Receiver: Device: "/dev/input/event5"
[ 42.960] (II) Logitech USB Receiver: Found 20 mouse buttons
[ 42.960] (II) Logitech USB Receiver: Found scroll wheel(s)
[ 42.960] (II) Logitech USB Receiver: Found relative axes
[ 42.960] (II) Logitech USB Receiver: Found x and y relative axes
[ 42.960] (II) Logitech USB Receiver: Configuring as mouse
[ 42.960] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 42.960] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 42.960] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[ 42.960] (II) Logitech USB Receiver: initialized for relative axes.
[ 42.961] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 42.961] (II) No input driver/identifier specified (ignoring)
[ 42.961] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 42.961] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 42.961] (**) Logitech USB Receiver: always reports core events
[ 42.961] (**) Logitech USB Receiver: Device: "/dev/input/event6"
[ 42.961] (II) Logitech USB Receiver: Found 1 mouse buttons
[ 42.961] (II) Logitech USB Receiver: Found scroll wheel(s)
[ 42.961] (II) Logitech USB Receiver: Found relative axes
[ 42.961] (II) Logitech USB Receiver: Found absolute axes
[ 42.961] (II) evdev-grail: failed to open grail, no gesture support
[ 42.961] (II) Logitech USB Receiver: Found keys
[ 42.961] (II) Logitech USB Receiver: Configuring as mouse
[ 42.961] (II) Logitech USB Receiver: Configuring as keyboard
[ 42.961] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 42.961] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 42.961] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 42.961] (**) Option "xkb_rules" "evdev"
[ 42.962] (**) Option "xkb_model" "evdev"
[ 42.962] (**) Option "xkb_layout" "us,gr"
[ 42.962] (**) Option "xkb_variant" ","
[ 42.962] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 42.962] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[ 42.962] (II) Logitech USB Receiver: initialized for absolute axes.
[ 42.963] (II) config/udev: Adding input device Video WebCam (/dev/input/event8)
[ 42.963] (**) Video WebCam: Applying InputClass "evdev keyboard catchall"
[ 42.963] (**) Video WebCam: always reports core events
[ 42.963] (**) Video WebCam: Device: "/dev/input/event8"
[ 42.963] (II) Video WebCam: Found keys
[ 42.963] (II) Video WebCam: Configuring as keyboard
[ 42.964] (II) XINPUT: Adding extended input device "Video WebCam" (type: KEYBOARD)
[ 42.964] (**) Option "xkb_rules" "evdev"
[ 42.964] (**) Option "xkb_model" "evdev"
[ 42.964] (**) Option "xkb_layout" "us,gr"
[ 42.964] (**) Option "xkb_variant" ","
[ 42.964] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 42.966] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 42.966] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 42.966] (**) AT Translated Set 2 keyboard: always reports core events
[ 42.966] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 42.980] (II) AT Translated Set 2 keyboard: Found keys
[ 42.980] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 42.980] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 42.980] (**) Option "xkb_rules" "evdev"
[ 42.980] (**) Option "xkb_model" "evdev"
[ 42.980] (**) Option "xkb_layout" "us,gr"
[ 42.980] (**) Option "xkb_variant" ","
[ 42.980] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 42.980] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event10)
[ 42.980] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 42.980] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 42.980] (II) LoadModule: "synaptics"
[ 42.981] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 42.981] (II) Module synaptics: vendor="X.Org Foundation"
[ 42.981] compiled for 1.9.0, module version = 1.2.2
[ 42.981] Module class: X.Org XInput Driver
[ 42.981] ABI class: X.Org XInput driver, version 11.0
[ 42.981] (II) Synaptics touchpad driver version 1.2.2
[ 42.981] (**) Option "Device" "/dev/input/event10"
[ 43.028] (II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 43.028] (II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 43.028] (II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 43.028] (II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
[ 43.028] (II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 43.060] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 43.060] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 43.076] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[ 43.076] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 43.076] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 0
[ 43.076] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 43.076] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 43.108] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 43.108] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)
[ 43.108] (II) No input driver/identifier specified (ignoring)
[ 43.108] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event9)
[ 43.108] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 43.108] (**) PS/2 Mouse: always reports core events
[ 43.108] (**) PS/2 Mouse: Device: "/dev/input/event9"
[ 43.124] (II) PS/2 Mouse: Found 3 mouse buttons
[ 43.124] (II) PS/2 Mouse: Found relative axes
[ 43.124] (II) PS/2 Mouse: Found x and y relative axes
[ 43.124] (II) PS/2 Mouse: Configuring as mouse
[ 43.124] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 43.124] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 43.124] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
[ 43.124] (II) PS/2 Mouse: initialized for relative axes.
[ 43.124] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse1)
[ 43.124] (II) No input driver/identifier specified (ignoring)
[ 43.592] (II) intel(0): EDID vendor "SEC", prod id 12358
[ 43.592] (II) intel(0): Printing DDC gathered Modelines:
[ 43.592] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 43.616] (II) intel(0): EDID vendor "SEC", prod id 12358
[ 43.616] (II) intel(0): Printing DDC gathered Modelines:
[ 43.616] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 43.644] (II) intel(0): EDID vendor "SEC", prod id 12358
[ 43.644] (II) intel(0): Printing DDC gathered Modelines:
[ 43.644] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 43.692] (II) intel(0): EDID vendor "SEC", prod id 12358
[ 43.692] (II) intel(0): Printing DDC gathered Modelines:
[ 43.692] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 43.952] (II) intel(0): EDID vendor "SEC", prod id 12358
[ 43.952] (II) intel(0): Printing DDC gathered Modelines:
[ 43.952] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 44.840] (II) intel(0): EDID vendor "SEC", prod id 12358
[ 44.840] (II) intel(0): Printing DDC gathered Modelines:
[ 44.840] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 49.404] (II) intel(0): EDID vendor "SEC", prod id 12358
[ 49.404] (II) intel(0): Printing DDC gathered Modelines:
[ 49.404] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 758.228] (II) intel(0): EDID vendor "SEC", prod id 12358
[ 758.228] (II) intel(0): Printing DDC gathered Modelines:
[ 758.228] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 1839.260] (II) intel(0): EDID vendor "SEC", prod id 12358
[ 1839.260] (II) intel(0): Printing DDC gathered Modelines:
[ 1839.260] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)


[simosx]

Από EDID φαίνεται μια χαρά, το πρόβλημα μπορεί να είναι με την κάρτα γραφικών, i915.
Δες εδώ για παρόμοιο σφάλμα,
http://lists.mandriva.com/bugs/2009-07/msg03485.php
και εντολές για να δοκιμάσεις αν μπορεί να διορθωθεί (παροδικά),οπότε βλέπεις αν είναι πραγματικά το πρόβλημα που αντιμετωπίζεις.

[clepto]

Κώδικας: Επιλογή όλων

ubuntu@ubuntu:~$ echo "10" > /sys/class/backlight/acpi_video0/brightness
bash: /sys/class/backlight/acpi_video0/brightness: Permission denied
ubuntu@ubuntu:~$ sudo echo "10" > /sys/class/backlight/acpi_video0/brightness
bash: /sys/class/backlight/acpi_video0/brightness: Permission denied


δεν ξερω αν σχετιζεται αλλα βρηκα αυτό, εσύ που ξέρεις καλύτερα κοίτα το...
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/636672


να αναφέρω ότι το πρόβλημα υπάρχει και με kubuntu 11.04

[clepto]

Launchpad bug: #773471

[clepto]

η λύση είναι να δώσω την εντολή

Κώδικας: Επιλογή όλων

setpci -s 00:02.0 F4.B=a1

όπου a1 βάζω τιμές από το 00 μέχρι το 95...κάπου εκεί...προς τα κάτω είναι και πιο φωτεινά!

edit: σε κάθε εκκίνηση πρέπει να δίνω αυτήν την εντολή...οπότε θα την βάλω στα προγράμματα εκκίνησης αλλά δεν ξέρω αν θα πιάσει...

edit2: δεν δουλεύει έτσι...αν έχει κάποιος κάποια ιδέα πολύ ευχαρίστως να την ακούσω...!

[tvmiros]

Το ίδιο πρόβλημα αντιμετωπίζω και εγώ, δίνω την εντολή ανοίγει η φωτεινότητα μετά την επανεκκίνηση όμως πάλι το ίδιο. Καμία λύση ?