Δεν λειτουργεί το δίκτυο - Ubuntu server 11.10

...ρύθμιση - εγκατάσταση web server, mail server, ftp server, κλπ

Συντονιστές: the_eye, konnn

Δεν λειτουργεί το δίκτυο - Ubuntu server 11.10

Δημοσίευσηαπό mariosv » 10 Δεκ 2011, 03:51

Μόλις έκανα fresh install το ubuntu Server 11.10 και στην εκκίνηση, σκαλώνει λέγοντας "Waiting for network configuration". Μετά από ένα λεπτό λέει "Waiting up to 60 seconds more for network" και μετά από λίγο ανοίγει κανονικά ζητώντας μου login. Κάνοντας login δεν λειτουργεί το δίκτυο (ethernet - και μόνο αυτό έχει) ενώ είναι συνδεδεμένο κανονικά.
Στο ifconfig δείχνει μόνο το Local Loopback

Στο /etc/network/interfaces έχει:
Κώδικας: Επιλογή όλων
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp


Επίσης παρατηρώ οτι κάνοντας:
Κώδικας: Επιλογή όλων
sudo lshw -C network

εμφανίζει πάνω πάνω
Κώδικας: Επιλογή όλων
*-network DISABLED


Μέχρι στιγμής αυτά τα δεδομένα έχω! Τι στο καλό θέλει για να δουλέψει;
Γνώσεις ⇛ Linux: Αρχάριος | Προγραμματισμός: Σχετικά καλά | Αγγλικά: Καλά
Laptop ⇛ Toshiba Satellite A200-1LA selective με Ubuntu 10.10 και Windows 7.
mariosv
babeTUX
babeTUX
 
Δημοσιεύσεις: 78
Εγγραφή: 17 Μαρ 2011, 22:42
Εκτύπωση

Re: Δεν λειτουργεί το δίκτυο - Ubuntu server 11.10

Δημοσίευσηαπό medigeek » 10 Δεκ 2011, 10:00

Δώσε ολόκληρο το αποτέλεσμα των εντολών:
Κώδικας: Επιλογή όλων

lspci -nn
lsusb
lsmod
rfkill list
apt-cache policy upstart
sudo ifup -v eth0
sudo lshw -C network
ifconfig
ping -c 3 google.com


Μετά δοκίμασε να μεταφέρεις και να εγκαταστήσεις αυτό το πακέτο:
64-bit: http://de.archive.ubuntu.com/ubuntu/poo ... _amd64.deb
32-bit: http://de.archive.ubuntu.com/ubuntu/poo ... 1_i386.deb
(Θελει επανεκκινηση)
Κύπριος; Κόπιασε στο ubuntu-cy! ┃ Launchpad Debian Github
Οδηγός για νεοεισερχόμενους -- Αρχικές οδηγίες για αρχάριους χρήστες του Ubuntu

1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 12.10 quantal 3.5.0-21-generic 64bit (en_US.UTF-8, GNOME cinnamon2d), Ubuntu 3.5.0-19-generic, Windows 7
3 Intel Core2 Duo CPU E6550 2.33GHz ‖ RAM 5970 MiB ‖ MSI MS-7235
4 nVidia G73 [GeForce 7300 GT] [10de:0393] {nvidia}
5 eth0: Realtek RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10)
Άβαταρ μέλους
medigeek
Freedom
Freedom
 
Δημοσιεύσεις: 5023
Εγγραφή: 24 Μάιος 2008, 14:49
Τοποθεσία: Σερβία/Κύπρος
Launchpad: medigeek
IRC: savvas
Εκτύπωση

Re: Δεν λειτουργεί το δίκτυο - Ubuntu server 11.10

Δημοσίευσηαπό mariosv » 10 Δεκ 2011, 15:10

Πες μου και ένα τρόπο να τα φέρω στον η/υ που σας γράφω καθώς το μηχάνημα με ubuntu δεν έχει δίκτυο για να μεταφέρω τα αποτελέσματα των εντολών και είναι λίγο μεγάλα για δαχτυλογράφηση!
Ή καλύτερα πως να κάνω mount ένα USB stick ώστε να τα αποθηκεύσω εκεί.
Γνώσεις ⇛ Linux: Αρχάριος | Προγραμματισμός: Σχετικά καλά | Αγγλικά: Καλά
Laptop ⇛ Toshiba Satellite A200-1LA selective με Ubuntu 10.10 και Windows 7.
mariosv
babeTUX
babeTUX
 
Δημοσιεύσεις: 78
Εγγραφή: 17 Μαρ 2011, 22:42
Εκτύπωση

Re: Δεν λειτουργεί το δίκτυο - Ubuntu server 11.10

Δημοσίευσηαπό mariosv » 10 Δεκ 2011, 15:52

Το κατάφερα το stick και σας δίνω:

lspci -nn
Κώδικας: Επιλογή όλων
00:00.0 "0600" "1039" "0661" -r11 "1695" "0661"
00:01.0 "0604" "1039" "0003" "" ""
00:02.0 "0601" "1039" "0963" -r25 "" ""
00:02.1 "0c05" "1039" "0016" "" ""
00:02.5 "0101" "1039" "5513" -p80 "1695" "5513"
00:02.7 "0401" "1039" "7012" -ra0 "1695" "2002"
00:03.0 "0c03" "1039" "7001" -r0f -p10 "1695" "7001"
00:03.1 "0c03" "1039" "7001" -r0f -p10 "1695" "7001"
00:03.3 "0c03" "1039" "7002" -p20 "1039" "7002"
00:04.0 "0200" "1039" "0900" -r90 "1695" "2002"
01:00.0 "0300" "1039" "6330" "1695" "6330"


lsusb
Κώδικας: Επιλογή όλων
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 1005:b113 Apacer Technology, Inc. Handy Steno 2.0/HT203


lsmod
Κώδικας: Επιλογή όλων
Module Size Used by
nls_iso8859_1 12617 1
nls_cp437 12751 1
vfat 17308 1
fat 55577 1 vfat
usb_storage 44173 1
uas 17699 0
vesafb 13489 1
ppdev 12849 0
snd_intel8x0 33318 0
snd_ac97_codec 106082 1 snd_intel8x0
ac97_bus 12642 1 snd_ac97_codec
snd_pcm 80468 2 snd_intel8x0,snd_ac97_codec
snd_timer 28932 1 snd_pcm
snd 55902 4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 12600 1 snd
snd_page_alloc 14108 2 snd_intel8x0,snd_pcm
parport_pc 32114 1
i2c_sis96x 12743 0
shpchp 32356 0
sis_agp 13165 1
lp 17455 0
parport 40930 3 ppdev,parport_pc,lp
sis900 22729 0
floppy 60310 0


rfkill list
Κώδικας: Επιλογή όλων
Λέει οτι δεν είναι εγκατεστημένο το rfkill


apt-cache policy upstart
Κώδικας: Επιλογή όλων
upstart:
Installed: 1.3-0ubuntu10
Candidate: 1.3-0ubuntu11
Version table:
1.3-0ubuntu11 0
500 http://us.archive.ubuntu.com/ubuntu/ oneiric-updates/main i386 Packages
*** 1.3-0ubuntu10 0
500 http://us.archive.ubuntu.com/ubuntu/ oneiric/main i386 Packages
100 /var/lib/dpkg/status


sudo ifup -v eth0
Κώδικας: Επιλογή όλων
Failed to bring up eth0.


sudo lshw -C network
Κώδικας: Επιλογή όλων
*-network DISABLED
description: Ethernet interface
product: SiS900 PCI Fast Ethernet
vendor: Silicon Integrated Systems [SiS]
physical id: 4
bus info: pci@0000:00:04.0
logical name: eth1
version: 90
serial: 00:04:61:6c:40:65
size: 100Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sis900 driverversion=v1.08.10 Apr. 2 2006 duplex=full latency=32 link=no maxlatency=11 mingnt=52 multicast=yes port=MII speed=100Mbit/s
resources: irq:19 ioport:e200(size=256) memory:ec122000-ec122fff memory:40000000-4001ffff


ifconfig
Κώδικας: Επιλογή όλων
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)


ping -c 3 google.com
Κώδικας: Επιλογή όλων
ping: unknown host google.com


Το πακέτο δεν το εγκατέστησα ακόμα . . .
Γνώσεις ⇛ Linux: Αρχάριος | Προγραμματισμός: Σχετικά καλά | Αγγλικά: Καλά
Laptop ⇛ Toshiba Satellite A200-1LA selective με Ubuntu 10.10 και Windows 7.
mariosv
babeTUX
babeTUX
 
Δημοσιεύσεις: 78
Εγγραφή: 17 Μαρ 2011, 22:42
Εκτύπωση

Re: Δεν λειτουργεί το δίκτυο - Ubuntu server 11.10

Δημοσίευσηαπό mariosv » 10 Δεκ 2011, 16:02

Έβαλα και το πακέτο, αλλά δεν βλέπω διαφορά σε κάτι! :(
Γνώσεις ⇛ Linux: Αρχάριος | Προγραμματισμός: Σχετικά καλά | Αγγλικά: Καλά
Laptop ⇛ Toshiba Satellite A200-1LA selective με Ubuntu 10.10 και Windows 7.
mariosv
babeTUX
babeTUX
 
Δημοσιεύσεις: 78
Εγγραφή: 17 Μαρ 2011, 22:42
Εκτύπωση

Re: Δεν λειτουργεί το δίκτυο - Ubuntu server 11.10

Δημοσίευσηαπό the_eye » 10 Δεκ 2011, 16:33

Σε τί μηχάνημα το έχεις στήσει ; Τί hardware ;

Αν μπορείς δώσε και το αποτέλεσμα της εντολής
Κώδικας: Επιλογή όλων
dmesg
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 24.04.2
3 Intel Core i5-6500 CPU @ 3.20GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11717
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Δεν λειτουργεί το δίκτυο - Ubuntu server 11.10

Δημοσίευσηαπό mariosv » 10 Δεκ 2011, 16:56

dmesg
Κώδικας: Επιλογή όλων
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-12-generic-pae (buildd@vernadsky) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 16:37:17 UTC 2011 (Ubuntu 3.0.0-12.20-generic-pae 3.0.4)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003dff0000 (usable)
[ 0.000000] BIOS-e820: 000000003dff0000 - 000000003dff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003dff3000 - 000000003e000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.2 present.
[ 0.000000] DMI: /SiS-661, BIOS 6.00 PG 09/29/2004
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3dff0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03E000000 mask FFE000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 992MB, range: 32MB, type UC
[ 0.000000] total RAM covered: 992M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 2 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 992MB, range: 32MB, type UC
[ 0.000000] found SMP MP-table at [c00f4bc0] f4bc0
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[ 0.000000] RAMDISK: 365f2000 - 372f1000
[ 0.000000] ACPI: RSDP 000f6670 00014 (v00 AWARD )
[ 0.000000] ACPI: RSDT 3dff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 3dff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 3dff30c0 039C0 (v01 AWARD AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3dff0000 00040
[ 0.000000] ACPI: APIC 3dff6a80 00068 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 99MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0003dff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003dff0
[ 0.000000] On node 0 totalpages: 253823
[ 0.000000] free_area_init_node: node 0, pgdat c17e9f40, node_mem_map f743d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 200 pages used for memmap
[ 0.000000] HighMem zone: 25386 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3e000000 (gap: 3e000000:c0c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6200000 s29952 r0 d23296 u1048576
[ 0.000000] pcpu-alloc: s29952 r0 d23296 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251839
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic-pae root=UUID=abd7d3f8-9b1b-4dfe-94c4-79423b172f31 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4062720 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0003dff0)
[ 0.000000] Memory: 979316k/1015744k available (5494k kernel code, 35976k reserved, 2653k data, 720k init, 102344k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc17f6000 - 0xc18aa000 ( 720 kB)
[ 0.000000] .data : 0xc155d9b0 - 0xc17f5180 (2653 kB)
[ 0.000000] .text : 0xc1000000 - 0xc155d9b0 (5494 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2399.646 MHz processor.
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.29 BogoMIPS (lpj=9598584)
[ 0.004029] pid_max: default: 32768 minimum: 301
[ 0.004101] Security Framework initialized
[ 0.004181] AppArmor: AppArmor initialized
[ 0.004189] Yama: becoming mindful.
[ 0.004331] Mount-cache hash table entries: 512
[ 0.004785] Initializing cgroup subsys cpuacct
[ 0.004810] Initializing cgroup subsys memory
[ 0.004835] Initializing cgroup subsys devices
[ 0.004843] Initializing cgroup subsys freezer
[ 0.004850] Initializing cgroup subsys net_cls
[ 0.004857] Initializing cgroup subsys blkio
[ 0.004880] Initializing cgroup subsys perf_event
[ 0.004988] CPU0: Hyper-Threading is disabled
[ 0.005002] mce: CPU supports 4 MCE banks
[ 0.005035] CPU0: Thermal monitoring enabled (TM1)
[ 0.005054] using mwait in idle threads.
[ 0.005664] SMP alternatives: switching to UP code
[ 0.032628] ACPI: Core revision 20110413
[ 0.036098] ftrace: allocating 25582 entries in 51 pages
[ 0.044340] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.044694] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.085654] CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 04
[ 0.088004] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.088004] ... version: 0
[ 0.088004] ... bit width: 40
[ 0.088004] ... generic registers: 18
[ 0.088004] ... value mask: 000000ffffffffff
[ 0.088004] ... max period: 0000007fffffffff
[ 0.088004] ... fixed-purpose events: 0
[ 0.088004] ... event mask: 000000000003ffff
[ 0.088004] Brought up 1 CPUs
[ 0.088004] Total of 1 processors activated (4799.29 BogoMIPS).
[ 0.088004] devtmpfs: initialized
[ 0.088004] PM: Registering ACPI NVS region at 3dff0000 (12288 bytes)
[ 0.092575] print_constraints: dummy:
[ 0.092644] Time: 13:31:55 Date: 12/10/11
[ 0.092809] NET: Registered protocol family 16
[ 0.093128] EISA bus registered
[ 0.093177] ACPI: bus type pci registered
[ 0.130898] PCI: PCI BIOS revision 2.10 entry at 0xfb500, last bus=1
[ 0.130917] PCI: Using configuration type 1 for base access
[ 0.133096] bio: create slab <bio-0> at 0
[ 0.134556] ACPI: EC: Look up EC in DSDT
[ 0.139514] ACPI: Interpreter enabled
[ 0.139554] ACPI: (supports S0 S1 S4 S5)
[ 0.139602] ACPI: Using IOAPIC for interrupt routing
[ 0.147036] ACPI: No dock devices found.
[ 0.147072] HEST: Table not found.
[ 0.147084] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.147294] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.147619] pci_root PNP0A03:00: host bridge window [io 0x0000-0x047f] (ignored)
[ 0.147627] pci_root PNP0A03:00: host bridge window [io 0x0490-0x0cf7] (ignored)
[ 0.147631] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored)
[ 0.147636] pci_root PNP0A03:00: host bridge window [io 0x1100-0xffff] (ignored)
[ 0.147642] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.147647] pci_root PNP0A03:00: host bridge window [mem 0x3e000000-0xfebfffff] (ignored)
[ 0.147688] pci 0000:00:00.0: [1039:0661] type 0 class 0x000600
[ 0.147709] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff]
[ 0.147829] pci 0000:00:01.0: [1039:0003] type 1 class 0x000604
[ 0.147895] pci 0000:00:02.0: [1039:0008] type 0 class 0x000601
[ 0.148066] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.148115] pci 0000:00:02.1: [1039:0016] type 0 class 0x000c05
[ 0.148184] pci 0000:00:02.1: reg 20: [io 0x10c0-0x10df]
[ 0.148249] pci 0000:00:02.5: [1039:5513] type 0 class 0x000101
[ 0.148296] pci 0000:00:02.5: reg 10: [io 0x01f0-0x01f7]
[ 0.148311] pci 0000:00:02.5: reg 14: [io 0x03f4-0x03f7]
[ 0.148326] pci 0000:00:02.5: reg 18: [io 0x0170-0x0177]
[ 0.148341] pci 0000:00:02.5: reg 1c: [io 0x0374-0x0377]
[ 0.148356] pci 0000:00:02.5: reg 20: [io 0x4000-0x400f]
[ 0.148409] pci 0000:00:02.5: supports D1
[ 0.148413] pci 0000:00:02.5: PME# supported from D3cold
[ 0.148421] pci 0000:00:02.5: PME# disabled
[ 0.148453] pci 0000:00:02.7: [1039:7012] type 0 class 0x000401
[ 0.148480] pci 0000:00:02.7: reg 10: [io 0xe000-0xe0ff]
[ 0.148496] pci 0000:00:02.7: reg 14: [io 0xe100-0xe17f]
[ 0.148583] pci 0000:00:02.7: supports D1 D2
[ 0.148586] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.148593] pci 0000:00:02.7: PME# disabled
[ 0.148618] pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03
[ 0.148639] pci 0000:00:03.0: reg 10: [mem 0xec123000-0xec123fff]
[ 0.148736] pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03
[ 0.148757] pci 0000:00:03.1: reg 10: [mem 0xec120000-0xec120fff]
[ 0.148861] pci 0000:00:03.3: [1039:7002] type 0 class 0x000c03
[ 0.148887] pci 0000:00:03.3: reg 10: [mem 0xec121000-0xec121fff]
[ 0.148983] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.148990] pci 0000:00:03.3: PME# disabled
[ 0.149027] pci 0000:00:04.0: [1039:0900] type 0 class 0x000200
[ 0.149053] pci 0000:00:04.0: reg 10: [io 0xe200-0xe2ff]
[ 0.149069] pci 0000:00:04.0: reg 14: [mem 0xec122000-0xec122fff]
[ 0.149132] pci 0000:00:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.149161] pci 0000:00:04.0: supports D1 D2
[ 0.149164] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149171] pci 0000:00:04.0: PME# disabled
[ 0.149274] pci 0000:01:00.0: [1039:6330] type 0 class 0x000300
[ 0.149297] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.149310] pci 0000:01:00.0: reg 14: [mem 0xec000000-0xec01ffff]
[ 0.149322] pci 0000:01:00.0: reg 18: [io 0xd000-0xd07f]
[ 0.149384] pci 0000:01:00.0: supports D1 D2
[ 0.149437] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.149451] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.149459] pci 0000:00:01.0: bridge window [mem 0xec000000-0xec0fffff]
[ 0.149466] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
[ 0.149480] pci_bus 0000:00: on NUMA node 0
[ 0.149494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.149876] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.167566] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.167703] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.167816] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.167948] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.168108] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.168235] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.168358] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.168471] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.168862] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.168886] vgaarb: loaded
[ 0.168891] vgaarb: bridge control possible 0000:01:00.0
[ 0.169436] SCSI subsystem initialized
[ 0.169747] libata version 3.00 loaded.
[ 0.169895] usbcore: registered new interface driver usbfs
[ 0.169934] usbcore: registered new interface driver hub
[ 0.170079] usbcore: registered new device driver usb
[ 0.170409] PCI: Using ACPI for IRQ routing
[ 0.170439] PCI: pci_cache_line_size set to 64 bytes
[ 0.170546] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.170552] reserve RAM buffer: 000000003dff0000 - 000000003fffffff
[ 0.170897] NetLabel: Initializing
[ 0.170918] NetLabel: domain hash size = 128
[ 0.170923] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.170961] NetLabel: unlabeled traffic allowed by default
[ 0.188094] AppArmor: AppArmor Filesystem Enabled
[ 0.188257] pnp: PnP ACPI init
[ 0.188311] ACPI: bus type pnp registered
[ 0.188751] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.188758] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[ 0.188762] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[ 0.188765] pnp 00:00: [mem 0x000fc000-0x000fffff]
[ 0.188769] pnp 00:00: [mem 0x3dff0000-0x3dffffff]
[ 0.188773] pnp 00:00: [mem 0xffff0000-0xffffffff]
[ 0.188777] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.188781] pnp 00:00: [mem 0x00100000-0x3dfeffff]
[ 0.188784] pnp 00:00: [mem 0xffee0000-0xffefffff]
[ 0.188788] pnp 00:00: [mem 0xfffe0000-0xfffeffff]
[ 0.188792] pnp 00:00: [mem 0xfec00000-0xfecfffff]
[ 0.188796] pnp 00:00: [mem 0xfee00000-0xfeefffff]
[ 0.188944] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.188963] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.188973] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.188981] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.188990] system 00:00: [mem 0x3dff0000-0x3dffffff] could not be reserved
[ 0.188999] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.189006] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.189015] system 00:00: [mem 0x00100000-0x3dfeffff] could not be reserved
[ 0.189023] system 00:00: [mem 0xffee0000-0xffefffff] has been reserved
[ 0.189031] system 00:00: [mem 0xfffe0000-0xfffeffff] has been reserved
[ 0.189039] system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.189047] system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.189061] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.189226] pnp 00:01: [bus 00-ff]
[ 0.189232] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.189236] pnp 00:01: [io 0x0000-0x047f window]
[ 0.189239] pnp 00:01: [io 0x0480-0x048f]
[ 0.189243] pnp 00:01: [io 0x0490-0x0cf7 window]
[ 0.189247] pnp 00:01: [io 0x0d00-0x0fff window]
[ 0.189251] pnp 00:01: [io 0x1000-0x10bf]
[ 0.189254] pnp 00:01: [io 0x10c0-0x10ff]
[ 0.189258] pnp 00:01: [io 0x1100-0xffff window]
[ 0.189262] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.189266] pnp 00:01: [mem 0x3e000000-0xfebfffff window]
[ 0.189386] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.189772] pnp 00:02: [io 0x0010-0x001f]
[ 0.189777] pnp 00:02: [io 0x0022-0x003f]
[ 0.189780] pnp 00:02: [io 0x0044-0x005f]
[ 0.189784] pnp 00:02: [io 0x0062-0x0063]
[ 0.189787] pnp 00:02: [io 0x0065-0x006f]
[ 0.189790] pnp 00:02: [io 0x0074-0x007f]
[ 0.189793] pnp 00:02: [io 0x0091-0x0093]
[ 0.189797] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.189800] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.189804] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.189807] pnp 00:02: [io 0x0800-0x0805]
[ 0.189810] pnp 00:02: [io 0x0290-0x0297]
[ 0.189961] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.189981] system 00:02: [io 0x0800-0x0805] has been reserved
[ 0.189990] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.190000] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.190038] pnp 00:03: [dma 4]
[ 0.190042] pnp 00:03: [io 0x0000-0x000f]
[ 0.190045] pnp 00:03: [io 0x0080-0x0090]
[ 0.190049] pnp 00:03: [io 0x0094-0x009f]
[ 0.190052] pnp 00:03: [io 0x00c0-0x00df]
[ 0.190122] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.190148] pnp 00:04: [io 0x0070-0x0073]
[ 0.190191] pnp 00:04: [irq 8]
[ 0.190255] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.190277] pnp 00:05: [io 0x0061]
[ 0.190335] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.190356] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.190372] pnp 00:06: [irq 13]
[ 0.190459] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.190774] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.190779] pnp 00:07: [io 0x03f7]
[ 0.190800] pnp 00:07: [irq 6]
[ 0.190804] pnp 00:07: [dma 2]
[ 0.190943] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.191298] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.191321] pnp 00:08: [irq 4]
[ 0.191486] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.191857] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.191880] pnp 00:09: [irq 3]
[ 0.192132] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.192692] pnp 00:0a: [io 0x0378-0x037f]
[ 0.192721] pnp 00:0a: [irq 7]
[ 0.192894] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.193126] pnp 00:0b: [io 0x0060]
[ 0.193131] pnp 00:0b: [io 0x0064]
[ 0.193153] pnp 00:0b: [irq 1]
[ 0.193273] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.193343] pnp: PnP ACPI: found 12 devices
[ 0.193367] ACPI: ACPI bus type pnp unregistered
[ 0.193380] PnPBIOS: Disabled by ACPI PNP
[ 0.231956] Switching to clocksource acpi_pm
[ 0.232060] PCI: max bus depth: 1 pci_try_num: 2
[ 0.232132] pci 0000:00:04.0: BAR 6: assigned [mem 0x40000000-0x4001ffff pref]
[ 0.232153] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.232162] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.232175] pci 0000:00:01.0: bridge window [mem 0xec000000-0xec0fffff]
[ 0.232185] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
[ 0.232222] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.232227] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.232231] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.232235] pci_bus 0000:01: resource 1 [mem 0xec000000-0xec0fffff]
[ 0.232239] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
[ 0.232395] NET: Registered protocol family 2
[ 0.232589] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.233503] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.236179] Switched to NOHz mode on CPU #0
[ 0.237377] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.239326] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.239360] TCP reno registered
[ 0.239392] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.239467] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.239957] NET: Registered protocol family 1
[ 0.296075] pci 0000:01:00.0: Boot video device
[ 0.296084] PCI: CLS 32 bytes, default 64
[ 0.297115] audit: initializing netlink socket (disabled)
[ 0.297184] type=2000 audit(1323523914.292:1): initialized
[ 0.330000] Trying to unpack rootfs image as initramfs...
[ 0.404603] highmem bounce pool size: 64 pages
[ 0.404650] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.480947] VFS: Disk quotas dquot_6.5.2
[ 0.481199] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.483039] fuse init (API version 7.16)
[ 0.483425] msgmni has been set to 1712
[ 0.496889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.504504] io scheduler noop registered
[ 0.504541] io scheduler deadline registered
[ 0.504705] io scheduler cfq registered (default)
[ 0.505131] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.505206] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.505563] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.505593] ACPI: Power Button [PWRB]
[ 0.505715] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.505736] ACPI: Sleep Button [FUTS]
[ 0.505839] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.505855] ACPI: Power Button [PWRF]
[ 0.505987] ACPI: Fan [FAN] (on)
[ 0.506010] ACPI: acpi_idle registered with cpuidle
[ 0.509136] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.509166] ACPI: Thermal Zone [THRM] (40 C)
[ 0.509265] ERST: Table is not found!
[ 0.509890] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.530539] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.530665] isapnp: Scanning for PnP cards...
[ 0.620922] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.663928] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.753387] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.773208] Linux agpgart interface v0.103
[ 0.775913] brd: module loaded
[ 0.781642] loop: module loaded
[ 0.782278] pata_sis 0000:00:02.5: version 0.5.2
[ 0.782380] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.832206] scsi0 : pata_sis
[ 0.832807] scsi1 : pata_sis
[ 0.834009] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[ 0.834028] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[ 0.834949] Fixed MDIO Bus: probed
[ 0.835020] PPP generic driver version 2.4.2
[ 0.835256] tun: Universal TUN/TAP device driver, 1.6
[ 0.835268] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.835606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.835762] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.835836] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 0.835992] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 0.840835] ehci_hcd 0000:00:03.3: irq 23, io mem 0xec121000
[ 0.852445] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 0.853122] hub 1-0:1.0: USB hub found
[ 0.853154] hub 1-0:1.0: 6 ports detected
[ 0.853327] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.853455] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.853528] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 0.853777] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 0.853894] ohci_hcd 0000:00:03.0: irq 20, io mem 0xec123000
[ 0.944703] hub 2-0:1.0: USB hub found
[ 0.944750] hub 2-0:1.0: 3 ports detected
[ 0.945009] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.945086] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 0.945318] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 0.945421] ohci_hcd 0000:00:03.1: irq 21, io mem 0xec120000
[ 1.002749] hub 3-0:1.0: USB hub found
[ 1.002798] hub 3-0:1.0: 3 ports detected
[ 1.002994] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.003259] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.003274] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.003517] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.004779] mousedev: PS/2 mouse device common for all mice
[ 1.005177] ata1.00: ATA-7: Maxtor 6E040L0, NAR61EA0, max UDMA/133
[ 1.005200] ata1.00: 80293248 sectors, multi 16: LBA
[ 1.005789] rtc_cmos 00:04: RTC can wake from S4
[ 1.006046] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.006116] rtc0: alarms up to one year, 242 bytes nvram
[ 1.006402] device-mapper: uevent: version 1.0.3
[ 1.006735] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.006872] EISA: Probing bus 0 at eisa.0
[ 1.006901] Cannot allocate resource for EISA slot 1
[ 1.006918] Cannot allocate resource for EISA slot 4
[ 1.006943] EISA: Detected 0 cards.
[ 1.006983] cpufreq-nforce2: No nForce2 chipset.
[ 1.006994] cpuidle: using governor ladder
[ 1.007000] cpuidle: using governor menu
[ 1.007006] EFI Variables Facility v0.08 2004-May-17
[ 1.008698] TCP cubic registered
[ 1.009231] NET: Registered protocol family 10
[ 1.012642] ata1.00: configured for UDMA/133
[ 1.014144] NET: Registered protocol family 17
[ 1.014267] Registering the dns_resolver key type
[ 1.014385] Using IPI No-Shortcut mode
[ 1.017584] PM: Hibernation image not present or could not be loaded.
[ 1.017646] registered taskstats version 1
[ 1.037620] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.187875] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.256083] isapnp: No Plug & Play device found
[ 1.256694] scsi 0:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5
[ 1.257252] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.257873] sd 0:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB)
[ 1.258027] sd 0:0:0:0: [sda] Write Protect is off
[ 1.258043] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.258105] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.328219] Refined TSC clocksource calibration: 2399.727 MHz.
[ 1.328272] Switching to clocksource tsc
[ 1.420665] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L15, max UDMA/33
[ 1.420706] ata2.01: ATAPI: ATAPI CD-RW 52X32, M.AD, max UDMA/33
[ 1.436585] ata2.00: configured for UDMA/33
[ 1.444945] ata2.01: configured for UDMA/33
[ 1.450394] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0L15 PQ: 0 ANSI: 5
[ 1.455775] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 1.455818] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.456395] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.456642] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.457530] scsi 1:0:1:0: CD-ROM ATAPI CD-RW 52X32 M.AD PQ: 0 ANSI: 5
[ 1.460634] sr1: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 1.461109] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 1.461330] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 1.558015] Freeing initrd memory: 13308k freed
[ 1.635503] Magic number: 7:643:533
[ 1.635602] bdi 1:11: hash matches
[ 1.635632] tty ttyS13: hash matches
[ 1.635812] rtc_cmos 00:04: setting system clock to 2011-12-10 13:31:56 UTC (1323523916)
[ 1.635890] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.635897] EDD information not available.
[ 3.363793] sda: sda1 sda2 < sda5 >
[ 3.365021] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.365141] Freeing unused kernel memory: 720k freed
[ 3.367757] Write protecting the kernel text: 5496k
[ 3.367856] Write protecting the kernel read-only data: 2232k
[ 3.469682] udevd[81]: starting version 173
[ 4.064158] FDC 0 is a post-1991 82077
[ 4.358434] sis900.c: v1.08.10 Apr. 2 2006
[ 4.358623] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.360126] 0000:00:04.0: VIA 6103 PHY transceiver found at address 1.
[ 4.373576] 0000:00:04.0: Using transceiver found at address 1 as default
[ 4.429767] eth0: SiS 900 PCI Fast Ethernet at 0xe200, IRQ 19, 00:04:61:6c:40:65
[ 4.493385] usbcore: registered new interface driver uas
[ 4.509167] Initializing USB Mass Storage driver...
[ 4.521137] scsi2 : usb-storage 1-1:1.0
[ 4.528323] usbcore: registered new interface driver usb-storage
[ 4.528353] USB Mass Storage support registered.
[ 4.561200] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 4.561241] EXT4-fs (sda1): write access will be enabled during recovery
[ 5.204529] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 5.204614] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 915751
[ 5.204900] EXT4-fs (sda1): 1 orphan inode deleted
[ 5.204916] EXT4-fs (sda1): recovery complete
[ 5.529984] scsi 2:0:0:0: Direct-Access USB FLASH DRIVE PMAP PQ: 0 ANSI: 0 CCS
[ 5.541352] sd 2:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 5.541485] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 5.542112] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.542142] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 5.542847] sd 2:0:0:0: [sdb] No Caching mode page present
[ 5.542876] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 5.546348] sd 2:0:0:0: [sdb] No Caching mode page present
[ 5.546386] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 5.547524] sdb: sdb1
[ 5.550829] sd 2:0:0:0: [sdb] No Caching mode page present
[ 5.550866] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 5.550878] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 6.177714] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.628590] udevd[274]: starting version 173
[ 8.844713] Adding 2618364k swap on /dev/sda5. Priority:-1 extents:1 across:2618364k
[ 9.465023] lp: driver loaded but no devices found
[ 10.385533] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.504434] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.513942] agpgart-sis 0000:00:00.0: SiS chipset [1039/0661]
[ 10.600279] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 10.704419] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0
[ 10.728871] parport_pc 00:0a: reported by Plug and Play ACPI
[ 10.728947] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 10.832452] lp0: using parport0 (interrupt-driven).
[ 12.038124] udevd[300]: renamed network interface eth0 to eth1
[ 13.023280] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 13.417751] intel8x0_measure_ac97_clock: measured 55034 usecs (2648 samples)
[ 13.417762] intel8x0: clocking to 48000
[ 13.476855] type=1400 audit(1323523928.338:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=433 comm="apparmor_parser"
[ 13.480932] type=1400 audit(1323523928.342:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=476 comm="apparmor_parser"
[ 13.482078] type=1400 audit(1323523928.342:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=433 comm="apparmor_parser"
[ 13.482622] type=1400 audit(1323523928.342:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=433 comm="apparmor_parser"
[ 13.485356] type=1400 audit(1323523928.346:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=476 comm="apparmor_parser"
[ 13.485914] type=1400 audit(1323523928.346:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=476 comm="apparmor_parser"
[ 14.086873] ppdev: user-space parallel port driver
[ 15.445821] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 15.445830] vesafb: scrolling: redraw
[ 15.445835] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 15.446412] vesafb: framebuffer at 0xe0000000, mapped to 0xf8600000, using 1216k, total 1216k
[ 15.447050] Console: switching to colour frame buffer device 80x30
[ 15.453094] fb0: VESA VGA frame buffer device
[ 134.967709] type=1400 audit(1323524049.826:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=617 comm="apparmor_parser"
[ 134.973157] type=1400 audit(1323524049.834:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=617 comm="apparmor_parser"
[ 134.973749] type=1400 audit(1323524049.834:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=617 comm="apparmor_parser"
[ 135.039865] type=1400 audit(1323524049.898:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=618 comm="apparmor_parser"
[ 135.582799] init: apport pre-start process (640) terminated with status 1
[ 135.840690] init: apport post-stop process (660) terminated with status 1


Υπολογιστής:
Intel Celeron D @ 2.40Ghz
Μητρική: Epox EP 4SGM8I (χαρακτηριστικά εδώ)
Ram: 1GB ( 2 X 512MB )
HDD: 40 GB maxtor
Ένα DVDrom και ένα CDrom, τροφοδοτικό 350Watt. Αυτά!
Χρειάζεται και κάτι άλλο;
Γνώσεις ⇛ Linux: Αρχάριος | Προγραμματισμός: Σχετικά καλά | Αγγλικά: Καλά
Laptop ⇛ Toshiba Satellite A200-1LA selective με Ubuntu 10.10 και Windows 7.
mariosv
babeTUX
babeTUX
 
Δημοσιεύσεις: 78
Εγγραφή: 17 Μαρ 2011, 22:42
Εκτύπωση

Re: Δεν λειτουργεί το δίκτυο - Ubuntu server 11.10

Δημοσίευσηαπό the_eye » 10 Δεκ 2011, 17:08

Για τρέξε
Κώδικας: Επιλογή όλων
sudo ifup -v eth1
ifconfig
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 24.04.2
3 Intel Core i5-6500 CPU @ 3.20GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11717
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Δεν λειτουργεί το δίκτυο - Ubuntu server 11.10

Δημοσίευσηαπό mariosv » 10 Δεκ 2011, 17:18

Ignoring unknown interface eth1=eth1
και το ifconfig παραμένει ίδιο!
Γνώσεις ⇛ Linux: Αρχάριος | Προγραμματισμός: Σχετικά καλά | Αγγλικά: Καλά
Laptop ⇛ Toshiba Satellite A200-1LA selective με Ubuntu 10.10 και Windows 7.
mariosv
babeTUX
babeTUX
 
Δημοσιεύσεις: 78
Εγγραφή: 17 Μαρ 2011, 22:42
Εκτύπωση

Re: Δεν λειτουργεί το δίκτυο - Ubuntu server 11.10

Δημοσίευσηαπό mariosv » 10 Δεκ 2011, 17:20

Μήπως να βάλω τα 10.04 να έχω το κεφάλι μου ήσυχο;
Γνώσεις ⇛ Linux: Αρχάριος | Προγραμματισμός: Σχετικά καλά | Αγγλικά: Καλά
Laptop ⇛ Toshiba Satellite A200-1LA selective με Ubuntu 10.10 και Windows 7.
mariosv
babeTUX
babeTUX
 
Δημοσιεύσεις: 78
Εγγραφή: 17 Μαρ 2011, 22:42
Εκτύπωση

Επόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Διακομιστές / Εξυπηρετητές