Δεν εντοπίζει wifi - Atheros AR5007EG

[ubuG]

Καλησπέρα.
[Συγγνώμη που ανοίγω καινούριο θέμα ενώ ήδη υπάρχουν τόσα πολλά γι' αυτή την κάρτα. Τα διάβασα αλλά δεν έβγαλα άκρη με κανένα και έτσι είπα να τα πάρουμε από την αρχή μπας και μπορέσετε να με βοηθήσετε εσείς καλύτερα.]

Μετά από ένα πρόβλημα με το σκληρό δίσκο, είχα στείλει το λαπτοπ για service. Όταν το πήρα πίσω, είχαν κάνει ολικό φορμάτ. Τα εξής παράδοξα εμφανιστηκαν:
Σε όποια έκδοση ubuntu και να δοκίμασα, σε καμία δεν εντοπίζει ασύρματα δίκτυα (με ethernet συνδέεται κανονικά)
Πριν από αυτό το φορμάτ όμως, είχα περασμένα το ubuntu 10.04 πάλι και το wifi δεν είχε ποτέ πρόβλημα.
Δοκίμασα διάφορα αλλά δεν κατάφερα να κάνω κάτι.

ΥΓ. Ακόμα και όταν ανοίξω τα windows, κατά την έναρξη πρέπει να πατήσω το κουμπί που ενεργοποιεί το wifi,( fn+f9), γιατί σε κάθε εκκίνηση είναι κλειστό. Και αυτό δεν ξέρω πώς μπορώ να το αλλάξω. Αυτό το κουμπί δε λειτουργεί στο ubuntu.

[simosx]

ΥΓ. Ακόμα και όταν ανοίξω τα windows, κατά την έναρξη πρέπει να πατήσω το κουμπί που ενεργοποιεί το wifi,( fn+f9), γιατί σε κάθε εκκίνηση είναι κλειστό. Και αυτό δεν ξέρω πώς μπορώ να το αλλάξω. Αυτό το κουμπί δε λειτουργεί στο ubuntu.

Οπότε είναι θέμα του λεγόμενου rfkill για το Ubuntu.
Εδώ εκτελείς την εντολή

Κώδικας: Επιλογή όλων

rfkill list

για να δούμε τις λεπτομέρειες (για να επιβεβαιώσουμε ότι το ασύρματο είναι κάτω λόγω κλειδώματος λογισμικού).

Χρειάζεται μετά να γίνει σύνδεση του συνδυασμού Fn+F9 με την εντολή που ξεκλειδώνει το ασύρματο.

Αν θέλεις να γλυτώσεις τη διαδικασία, δοκιμάζεις και με το LiveUSB του Ubuntu 12.04 (τώρα στο Beta2).

[ubuG]

Η εντολή δίνει αποτέλεσμα:

Κώδικας: Επιλογή όλων


0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no


ΥΓ. Δοκίμασα την 12.04 από live cd και πάλι δεν εντοπίζει...

[Learner]

1)Δοκίμασες να ενεργοποιήσεις το wireless από τον Network Manager ; Πάνω δεξιά είναι νομίζω.

2)Δοκίμασες να εγκαταστήσεις τυχόν οδηγούς για την κάρτα σου ; Βλέπεις αν θέλουν εγκατάσταση εκτελώντας την εντολή

Κώδικας: Επιλογή όλων

jockey-gtk

3) Δώσε τα αποτέλεσμα των εντολών

Κώδικας: Επιλογή όλων

rfkill list all
nm-tool
iwconfig

επεξεργασία : προσθήκη του 2)

[simosx]

Η εντολή δίνει αποτέλεσμα:

Κώδικας: Επιλογή όλων


0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no


ΥΓ. Δοκίμασα την 12.04 από live cd και πάλι δεν εντοπίζει...

Το παραπάνω rfkill list είναι από 12.04; Πως ξέρεις ότι δεν την εντοπίζει σε Ubuntu 12.04 beta2;

Όταν δοκιμάζεις με το LiveUSB του Ubuntu 12.04beta2, μπορείς να εκτελέσεις και

Κώδικας: Επιλογή όλων

sudo apt-get install linux-firmware
sudo apt-get install linux-firmware-nonfree

Ίσως χρειαστεί να τρέξεις μετά (νομίζω ότι πρέπει να έχεις τον οδηγό ath9k,

Κώδικας: Επιλογή όλων

sudo rmmod ath9k

και στη συνέχεια

Κώδικας: Επιλογή όλων

sudo modprobe ath9k

για να διαβάσει τυχόν firmware.
Αν πάλι υπάρχει πρόβλημα, στείλε εδώ το αποτέλεσμα της εντολής

Κώδικας: Επιλογή όλων

dmesg

όπου θα δείξει αν λείπει τυχόν firmware από αυτή την προσπάθεια.

[vagrale13]

Επισης, περα απο τα παραπανω, διαβαζω στην υπογραφη σου οτι εχεις την καρτα

Κώδικας: Επιλογή όλων

wlan0: Atheros Inc. AR5001 Wireless Network Adapter [168c:001c]

σωστα?
Αν ναι, πες μας ποια εκδοση Ubuntu εχεις εγκατεστημενη και αντιμετωπιζεις αυτο το προβλημα.
Εχω την ιδια καρτα, και υπηρξε προβλημα σε καποιες εκδοσεις, αλλα δεν ξερω αν διορθωθηκε.

@simosx
Η συγκεκριμενη καρτα χρειαζεται τον οδηγο ath5k

[ubuG]

Καταρχήν να πω ότι εγκατέστησα την 12.04 beta2

1)Δοκίμασες να ενεργοποιήσεις το wireless από τον Network Manager ; Πάνω δεξιά είναι νομίζω.

2)Δοκίμασες να εγκαταστήσεις τυχόν οδηγούς για την κάρτα σου ; Βλέπεις αν θέλουν εγκατάσταση εκτελώντας την εντολή

Κώδικας: Επιλογή όλων

jockey-gtk

3) Δώσε τα αποτέλεσμα των εντολών

Κώδικας: Επιλογή όλων

rfkill list all
nm-tool
iwconfig

επεξεργασία : προσθήκη του 2)

1) Είναι ενεργοποιημένο
2) Δεν έχει κάποιον να βάλω
3) rfkill list all

Κώδικας: Επιλογή όλων

0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no


nm-tool

Κώδικας: Επιλογή όλων


NetworkManager Tool

State: connected (global)

- Device: eth0 [Wired connection 1] -------------------------------------------
Type: Wired
Driver: sky2
State: connected
Default: yes
HW Address: 00:24:54:19:96:10

Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s

Wired Properties
Carrier: on

IPv4 Settings:
Address: 192.168.1.6
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1

DNS: 192.168.1.1


- Device: wlan0 ----------------------------------------------------------------
Type: 802.11 WiFi
Driver: ath5k
State: disconnected
Default: no
HW Address: 0C:60:76:3D:E3:F8

Capabilities:

Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes

Wireless Access Points

iwconfig

Κώδικας: Επιλογή όλων

lo no wireless extensions.

wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off

eth0 no wireless extensions.


Η εντολή δίνει αποτέλεσμα:

Κώδικας: Επιλογή όλων


0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no


ΥΓ. Δοκίμασα την 12.04 από live cd και πάλι δεν εντοπίζει...

Το παραπάνω rfkill list είναι από 12.04; Πως ξέρεις ότι δεν την εντοπίζει σε Ubuntu 12.04 beta2;

Όταν δοκιμάζεις με το LiveUSB του Ubuntu 12.04beta2, μπορείς να εκτελέσεις και

Κώδικας: Επιλογή όλων

sudo apt-get install linux-firmware
sudo apt-get install linux-firmware-nonfree

Ίσως χρειαστεί να τρέξεις μετά (νομίζω ότι πρέπει να έχεις τον οδηγό ath9k,

Κώδικας: Επιλογή όλων

sudo rmmod ath9k

και στη συνέχεια

Κώδικας: Επιλογή όλων

sudo modprobe ath9k

για να διαβάσει τυχόν firmware.
Αν πάλι υπάρχει πρόβλημα, στείλε εδώ το αποτέλεσμα της εντολής

Κώδικας: Επιλογή όλων

dmesg

όπου θα δείξει αν λείπει τυχόν firmware από αυτή την προσπάθεια.

Το έκανα αλλά με το ath5k που είπε και ο vagrale13 γιατί έχω διαβάσει κι αλλού ότι για την κάρτα μου αυτό ταιριάζει. Δεν έγινε τίποτα.
Το dmesg (ό,τι φαίνεται από αυτό) έβγαλε :

Κώδικας: Επιλογή όλων

44
[ 0.853211] ata6: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204380 irq 44
[ 0.853688] Fixed MDIO Bus: probed
[ 0.853711] tun: Universal TUN/TAP device driver, 1.6
[ 0.853714] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.853781] PPP generic driver version 2.4.2
[ 0.853914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.853932] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.853949] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.853953] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.854005] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.854036] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.857914] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.857932] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc204800
[ 0.872020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.872189] hub 1-0:1.0: USB hub found
[ 0.872194] hub 1-0:1.0: 6 ports detected
[ 0.872283] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.872297] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.872301] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.872352] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.872380] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.876258] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.876274] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc204c00
[ 0.892019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.892145] hub 2-0:1.0: USB hub found
[ 0.892150] hub 2-0:1.0: 6 ports detected
[ 0.892237] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.892253] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.892271] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.892279] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.892283] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.892332] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.892373] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.892517] hub 3-0:1.0: USB hub found
[ 0.892522] hub 3-0:1.0: 2 ports detected
[ 0.892596] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.892605] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.892608] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.892655] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.892695] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.892834] hub 4-0:1.0: USB hub found
[ 0.892838] hub 4-0:1.0: 2 ports detected
[ 0.892908] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.892917] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.892921] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.892971] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.892999] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[ 0.893135] hub 5-0:1.0: USB hub found
[ 0.893143] hub 5-0:1.0: 2 ports detected
[ 0.893217] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.893226] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.893230] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.893276] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.893304] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 0.893441] hub 6-0:1.0: USB hub found
[ 0.893445] hub 6-0:1.0: 2 ports detected
[ 0.893519] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.893528] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.893532] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.893579] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.893607] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 0.893754] hub 7-0:1.0: USB hub found
[ 0.893758] hub 7-0:1.0: 2 ports detected
[ 0.893833] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.893841] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.893845] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.893891] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.893930] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.894070] hub 8-0:1.0: USB hub found
[ 0.894075] hub 8-0:1.0: 2 ports detected
[ 0.894212] usbcore: registered new interface driver libusual
[ 0.894267] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.896827] i8042: Detected active multiplexing controller, rev 1.1
[ 0.898104] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.898111] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.898146] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.898174] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.898204] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.898346] mousedev: PS/2 mouse device common for all mice
[ 0.898759] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.898791] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.898852] device-mapper: uevent: version 1.0.3
[ 0.898940] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.898975] EISA: Probing bus 0 at eisa.0
[ 0.898978] EISA: Cannot allocate resource for mainboard
[ 0.898980] Cannot allocate resource for EISA slot 1
[ 0.898982] Cannot allocate resource for EISA slot 2
[ 0.898984] Cannot allocate resource for EISA slot 3
[ 0.898986] Cannot allocate resource for EISA slot 4
[ 0.898988] Cannot allocate resource for EISA slot 5
[ 0.898990] Cannot allocate resource for EISA slot 6
[ 0.898992] Cannot allocate resource for EISA slot 7
[ 0.898994] Cannot allocate resource for EISA slot 8
[ 0.898996] EISA: Detected 0 cards.
[ 0.899007] cpufreq-nforce2: No nForce2 chipset.
[ 0.899060] cpuidle: using governor ladder
[ 0.899146] cpuidle: using governor menu
[ 0.899148] EFI Variables Facility v0.08 2004-May-17
[ 0.899438] TCP cubic registered
[ 0.899571] NET: Registered protocol family 10
[ 0.900199] NET: Registered protocol family 17
[ 0.900217] Registering the dns_resolver key type
[ 0.900241] Using IPI No-Shortcut mode
[ 0.900387] PM: Hibernation image not present or could not be loaded.
[ 0.900399] registered taskstats version 1
[ 0.914003] Magic number: 8:186:139
[ 0.914030] block ram4: hash matches
[ 0.914062] acpi device:10: hash matches
[ 0.914113] rtc_cmos 00:07: setting system clock to 2012-04-03 18:08:47 UTC (1333476527)
[ 0.914626] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.914628] EDD information not available.
[ 0.921685] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.172054] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.219318] ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
[ 1.219324] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.220115] ata1.00: configured for UDMA/100
[ 1.220264] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
[ 1.220401] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.220428] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.220456] sd 0:0:0:0: [sda] Write Protect is off
[ 1.220459] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.220485] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.296044] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[ 1.316270] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.316934] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.540053] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.540355] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633C, SC00, max UDMA/100
[ 1.540362] ata2.00: applying bridge limits
[ 1.540970] ata2.00: configured for UDMA/100
[ 1.543471] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C SC00 PQ: 0 ANSI: 5
[ 1.547826] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.547831] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.548012] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.548094] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.688061] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 1.868051] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.188049] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.188198] Freeing unused kernel memory: 740k freed
[ 2.188506] Write protecting the kernel text: 5824k
[ 2.188528] Write protecting the kernel read-only data: 2376k
[ 2.188530] NX-protecting the kernel data: 4416k
[ 2.206226] udevd[101]: starting version 175
[ 2.287981] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input5
[ 2.288099] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[ 2.290247] sky2: driver version 1.30
[ 2.290319] sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.290369] sky2 0000:06:00.0: setting latency timer to 64
[ 2.290458] sky2 0000:06:00.0: Yukon-2 UL 2 chip revision 0
[ 2.292294] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input6
[ 2.292471] generic-usb 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[ 2.292492] usbcore: registered new interface driver usbhid
[ 2.292494] usbhid: USB HID core driver
[ 2.292952] sky2 0000:06:00.0: irq 45 for MSI/MSI-X
[ 2.294792] sky2 0000:06:00.0: eth0: addr 00:24:54:19:96:10
[ 2.946715] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 17.699735] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.732561] udevd[341]: starting version 175
[ 17.824840] Adding 1648636k swap on /dev/sda6. Priority:-1 extents:1 across:1648636k
[ 17.833242] lp: driver loaded but no devices found
[ 17.856398] cfg80211: Calling CRDA to update world regulatory domain
[ 17.856984] [drm] Initialized drm 1.1.0 20060810
[ 17.881915] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.881931] ath5k 0000:02:00.0: setting latency timer to 64
[ 17.881995] ath5k 0000:02:00.0: registered as 'phy0'
[ 17.919268] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 17.948443] acpi device:03: registered as cooling_device4
[ 17.950142] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
[ 17.950499] ACPI: Video Device [NVID] (multi-head: yes rom: no post: no)
[ 18.020757] Linux video capture interface: v2.00
[ 18.027978] uvcvideo: Found UVC 1.00 device Namuga 1.3M Webcam (0ac8:c335)
[ 18.032803] input: Namuga 1.3M Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input8
[ 18.032931] usbcore: registered new interface driver uvcvideo
[ 18.032934] USB Video Class driver (1.1.1)
[ 18.112954] [drm] radeon defaulting to kernel modesetting.
[ 18.112958] [drm] radeon kernel modesetting enabled.
[ 18.113025] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.113032] radeon 0000:01:00.0: setting latency timer to 64
[ 18.153087] [drm] initializing kernel modesetting (RV730 0x1002:0x9480 0x144D:0xC050).
[ 18.153123] [drm] register mmio base: 0xCFEF0000
[ 18.153125] [drm] register mmio size: 65536
[ 18.153290] ATOM BIOS: Samsung_Bonn_EXT_M96M2_DDR3
[ 18.153321] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 18.153325] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 18.356099] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 18.356103] [drm] RAM width 128bits DDR
[ 18.364583] [TTM] Zone kernel: Available graphics memory: 420444 kiB.
[ 18.364586] [TTM] Zone highmem: Available graphics memory: 2042976 kiB.
[ 18.364588] [TTM] Initializing pool allocator.
[ 18.364611] [drm] radeon: 1024M of VRAM memory ready
[ 18.364613] [drm] radeon: 512M of GTT memory ready.
[ 18.364632] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 18.364634] [drm] Driver supports precise vblank timestamp query.
[ 18.364700] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[ 18.364710] radeon 0000:01:00.0: radeon: using MSI.
[ 18.364750] [drm] radeon: irq initialized.
[ 18.364755] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 18.379965] [drm] Loading RV730 Microcode
[ 18.396453] ath: EEPROM regdomain: 0x68
[ 18.396456] ath: EEPROM indicates we should expect a direct regpair map
[ 18.396460] ath: Country alpha2 being used: 00
[ 18.396461] ath: Regpair used: 0x68
[ 18.414809] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 18.414813] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.414816] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 18.414819] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.414821] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 18.414824] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.414827] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 18.414830] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.414832] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 18.414835] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.414838] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 18.414841] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.414844] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 18.414847] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.414849] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 18.414852] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.414854] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 18.414857] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.414860] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 18.414863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.414865] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 18.414868] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.414871] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 18.414874] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.414876] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 18.414879] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.414882] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 18.424669] type=1400 audit(1333465745.007:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=537 comm="apparmor_parser"
[ 18.425137] type=1400 audit(1333465745.007:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=537 comm="apparmor_parser"
[ 18.425406] type=1400 audit(1333465745.007:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=537 comm="apparmor_parser"
[ 18.425899] type=1400 audit(1333465745.007:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=546 comm="apparmor_parser"
[ 18.426371] type=1400 audit(1333465745.007:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=546 comm="apparmor_parser"
[ 18.426644] type=1400 audit(1333465745.007:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=546 comm="apparmor_parser"
[ 18.435334] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 18.460322] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 18.471699] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 18.472689] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 18.539901] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 18.539905] cfg80211: World regulatory domain updated:
[ 18.539907] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.539910] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.539913] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.539916] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.539919] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.539922] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.552370] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 18.552438] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 18.552475] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 18.559614] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 18.559691] radeon 0000:01:00.0: WB enabled
[ 18.608061] [drm] ring test succeeded in 1 usecs
[ 18.608251] [drm] radeon: ib pool ready.
[ 18.608332] [drm] ib test succeeded in 0 usecs
[ 18.613462] [drm] Radeon Display Connectors
[ 18.613465] [drm] Connector 0:
[ 18.613466] [drm] LVDS
[ 18.613473] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 18.613475] [drm] Encoders:
[ 18.613476] [drm] LCD1: INTERNAL_UNIPHY2
[ 18.613478] [drm] Connector 1:
[ 18.613480] [drm] VGA
[ 18.613482] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 18.613484] [drm] Encoders:
[ 18.613485] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 18.613487] [drm] Connector 2:
[ 18.613488] [drm] HDMI-A
[ 18.613490] [drm] HPD1
[ 18.613492] [drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[ 18.613494] [drm] Encoders:
[ 18.613495] [drm] DFP1: INTERNAL_UNIPHY
[ 18.613568] [drm] radeon: power management initialized
[ 18.614568] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 18.614660] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 18.827378] init: flush-early-job-log main process (687) terminated with status 1
[ 18.832093] init: failsafe main process (684) killed by TERM signal
[ 18.907221] Bluetooth: Core ver 2.16
[ 18.907273] NET: Registered protocol family 31
[ 18.907275] Bluetooth: HCI device and connection manager initialized
[ 18.907279] Bluetooth: HCI socket layer initialized
[ 18.907281] Bluetooth: L2CAP socket layer initialized
[ 18.907583] Bluetooth: SCO socket layer initialized
[ 18.920088] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.920091] Bluetooth: BNEP filters: protocol multicast
[ 18.932154] Bluetooth: RFCOMM TTY layer initialized
[ 18.932160] Bluetooth: RFCOMM socket layer initialized
[ 18.932162] Bluetooth: RFCOMM ver 1.11
[ 18.983665] type=1400 audit(1333465745.563:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=757 comm="apparmor_parser"
[ 18.983873] type=1400 audit(1333465745.563:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=758 comm="apparmor_parser"
[ 18.984435] type=1400 audit(1333465745.567:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=758 comm="apparmor_parser"
[ 18.984710] type=1400 audit(1333465745.567:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=758 comm="apparmor_parser"
[ 19.040164] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 19.076108] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 19.568245] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.569492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.581733] sky2 0000:06:00.0: eth0: enabling interface
[ 19.582355] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.584665] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.657316] [drm] fb mappable at 0xD0142000
[ 19.657319] [drm] vram apper at 0xD0000000
[ 19.657321] [drm] size 4325376
[ 19.657322] [drm] fb depth is 24
[ 19.657324] [drm] pitch is 5632
[ 19.657486] fbcon: radeondrmfb (fb0) is primary device
[ 19.658436] Console: switching to colour frame buffer device 170x48
[ 19.658470] fb0: radeondrmfb frame buffer device
[ 19.658472] drm: registered panic notifier
[ 19.658481] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 19.658532] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 19.658623] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[ 19.658666] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 19.703776] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 19.703878] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 19.868627] ppdev: user-space parallel port driver
[ 21.395692] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 21.395859] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.232031] eth0: no IPv6 routers present
[ 38.943340] audit_printk_skb: 45 callbacks suppressed
[ 38.943344] type=1400 audit(1333465765.523:27): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1778 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 228.954785] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 228.954790] Disabling lock debugging due to kernel taint
[ 229.091761] [fglrx] Maximum main memory to use for locked dma buffers: 3827 MBytes.
[ 229.092382] [fglrx] vendor: 1002 device: 9480 count: 1
[ 229.093225] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[ 229.093237] radeon 0000:01:00.0: setting latency timer to 64
[ 229.093571] [fglrx] Kernel PAT support is enabled
[ 229.093598] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[ 235.669653] sky2 0000:06:00.0: eth0: Link is down
[ 237.380419] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 327.798355] sky2 0000:06:00.0: eth0: Link is down
[ 334.503515] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 344.480811] sky2 0000:06:00.0: eth0: Link is down
[ 347.755915] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 358.857511] sky2 0000:06:00.0: eth0: Link is down
[ 372.877451] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 373.626886] sky2 0000:06:00.0: eth0: Link is down
[ 379.916606] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 865.792171] ath5k 0000:02:00.0: PCI INT A disabled
[ 876.540273] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 876.540295] ath5k 0000:02:00.0: setting latency timer to 64
[ 876.540372] ath5k 0000:02:00.0: registered as 'phy1'
[ 877.043130] ath: EEPROM regdomain: 0x68
[ 877.043133] ath: EEPROM indicates we should expect a direct regpair map
[ 877.043136] ath: Country alpha2 being used: 00
[ 877.043138] ath: Regpair used: 0x68
[ 877.043142] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 877.043145] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 877.043147] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 877.043151] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 877.043153] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 877.043156] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 877.043158] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 877.043161] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 877.043164] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 877.043167] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 877.043169] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 877.043172] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 877.043175] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 877.043178] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 877.043180] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 877.043183] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 877.043186] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 877.043189] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 877.043191] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 877.043194] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 877.043196] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 877.043199] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 877.043202] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 877.043205] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 877.043207] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 877.043210] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 877.043213] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 877.043264] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 877.043476] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 877.044399] ath5k phy1: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 877.065213] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 877.105693] ADDRCONF(NETDEV_UP): wlan0: link is not ready


[Learner]

1) Μήπως κατά λάθος έχεις ενεργοποιήσει το Ipv6 ? Κοίτα στον network manager. Αν είναι ενεργοποιημένο , βάλε το στο ignore.

2) Δοκίμασε επίσης

Κώδικας: Επιλογή όλων

sudo ifconfig wlan0 up

3)Δοκίμασε επίσης

Κώδικας: Επιλογή όλων

gksudo gedit /etc/modprobe.d/ath5k.conf

και πρόσθεσε αυτή τη γραμμή

Κώδικας: Επιλογή όλων

options ath5k nohwcrypt=1


αποθήκευσε και κάνε επανεκκίνηση.

Η τρίτη δοκιμή έχει αναφερθεί ξανά εδώ στο forum.

[ubuG]

Παιδιά λύθηκε !!

Μετά τις εντολές του simosx αλλά με ath5k αντι για ath9k που πρότεινε, αρχικά φάνηκε ότι δεν έγινε τίποτα μετά την επανεκκίνηση που έκανα, αλλά σήμερα που άνοιξα πάλι το ubuntu ήταν όλα κανονικά!! Σας ευχαριστώ πολύ όλους !

[vagrale13]

Μπορεις να επιβεβαιωσεις οτι η καρτα λειτουργει χωρις προβλημα στην εκδοση Ubuntu 12.04 beta?
Θα βοηθουσες επισης αν ποσταρες τα αποτελεσματα των παρακατω εντολων

Κώδικας: Επιλογή όλων

lspci -nn
uname -a
iwconfig
iwlist scan
dmesg
modinfo ath5k