Βοήθεια με tv tuner

...κάρτες γραφικών / προβλήματα εικόνας / τηλεοπτικοί δέκτες
Κανόνες Δ. Συζήτησης
Αν έχετε πρόβλημα με την κάρτα γραφικών σας και δεν μπορείτε να μπείτε σε γραφικό περιβάλλον,
δοκιμάστε να τρέξετε την παρακάτω εντολή για να ελέγξετε αν το σύστημά σας χρειάζεται πρόσθετους κλειστούς οδηγούς:
jockey-text

Για κάρτα τηλεόρασης δώστε τα αποτελέσματα των παρακάτω εντολών :
lspci -nn (Για εσωτερικές κάρτες pci)
lsusb (Για εξωτερικές κάρτες με σύνδεση usb)

Re: Βοήθεια με tv tuner

Δημοσίευσηαπό simosx » 25 Απρ 2012, 14:14

@Learner: μάλλον είναι προβληματική η διαδικασία για δοκιμή άλλων tuner από γραμμή εντολής.
Ίσως είναι πιο εύκολο να γίνεται κάθε φορά ρύθμιση στο /etc/modprobe.d/ και να χρειάζεται επανεκκίνηση.

@argy1: Όπως είναι τώρα, δε λειτουργεί ο tuner αν δεν καθοριστεί κάποιο μοντέλο (εκείνος ο αριθμός).
Το αναφέρει στα αγγλικά στο μήνυμα που εμφανίζεται στο dmesg.

Η συσκευή που έχεις δεν υποστηρίζει τα ψηφιακά της Digea, οπότε το metv δε λειτουργεί.

Κάτι που θα βοηθήσει είναι να βγάλεις φωτογραφία το κουτί του tuner στην περίπτωση που το Google έχει περισσότερες πληροφορίες, ή να αναφέρεις κάποιες λέξεις-κλειδιά για να αναζητήσουμε.
προσωπικό ιστολόγιο ϗ πλανήτης Ubuntu-gr
Συμβάλετε και εσείς στο ελληνικό βιβλίο Ubuntu!
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 13.10 saucy 3.11.0-031100rc1-generic 64bit (el_GR.UTF-8, Unity ubuntu)
3 AMD E-450 APU with Radeon HD Graphics ‖ RAM 3555 MiB ‖ Sony Corporation VAIO
4 AMD nee ATI Wrestler [Radeon HD 6320] [1002:9806] {fglrx_pci}
5 eth0: Atheros Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) ⋮ wlan0: Atheros Inc. AR9285 [168c:002b] (rev 01)
Φτιάξτε και εσείς τη δική σας υπογραφή (παραπάνω κείμενο) αυτόματα με κλικ εδώ!
simosx
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10334
Εγγραφή: 11 Μάιος 2008, 18:52
Launchpad: simosx
IRC: simosx
Εκτύπωση

Re: Βοήθεια με tv tuner

Δημοσίευσηαπό argy1 » 25 Απρ 2012, 14:47

Το κουτι δεν υπαρχει πλεον.Μπορω να σας δωσω καποιες λεξεις κλειδια αν βοηθαει αυτο. Αυτα που μπορω να δω στη καρτα και στο site του κατασκευαστη ειναι τα εξης:
V-Stream BG+DK//VS-LTV883RF//kw88x_LP Verc:C//Conexant//CX23883-19//broadcast decoder//E433707.1//0341 KOREA//RM-KuM01
Oριστε και φωτογραφιες της καρτας
http://s1079.photobucket.com/albums/w517/leros2004/Pc%20Parts/?action=view&current=IMG_0015.jpg
http://s1079.photobucket.com/albums/w517/leros2004/Pc%20Parts/?action=view&current=IMG_0013.jpg
Γνώσεις → Linux: Χαμηλό │ Προγραμματισμός: Όχι │ Αγγλικά: Πολύ καλά
Λειτουργικό: dual boot:ubuntu 12.04 lts 64bit/ windows7 64 bit ultimate
Προδιαγραφές ⇛ Intel Core 2 quad Q9300 │ RAM 4000 MiB │ NVIDIA GeForce 9800 GT 512│ Μητρική: Gigabyte GA-73PVM-S2
Άβαταρ μέλους
argy1
punkTUX
punkTUX
 
Δημοσιεύσεις: 183
Εγγραφή: 14 Ιουν 2011, 13:57
Εκτύπωση

Re: Βοήθεια με tv tuner

Δημοσίευσηαπό simosx » 25 Απρ 2012, 15:56

Είναι το προϊόν www.newegg.com/Product/Product.aspx?Ite ... 6815100113
οπότε πράγματι το card=16 είναι η σωστή τιμή που πρέπει να καθοριστεί.
Οπότε, εκτελείς από τερματικό

Κώδικας: Επιλογή όλων
sudo gedit tuner.conf

Θα ανοίξει τον κειμενογράφο για να βάλεις ρυθμίσεις για τη συσκευή σου.

Βάζεις το περιεχόμενο
Κώδικας: Επιλογή όλων
options cx88xx card=16

και αποθηκεύεις.

Τέλος, επανεκκίνηση.
Δοκιμάζεις με το tvtime. Ακόμα, είναι σε κάθε περίπτωση χρήσιμο να δώσεις ξανά το αποτέλεσμα της εντολής dmesg για να επιβεβαιώσουμε ότι καθορίστηκε σωστά το είδος του tuner.
προσωπικό ιστολόγιο ϗ πλανήτης Ubuntu-gr
Συμβάλετε και εσείς στο ελληνικό βιβλίο Ubuntu!
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 13.10 saucy 3.11.0-031100rc1-generic 64bit (el_GR.UTF-8, Unity ubuntu)
3 AMD E-450 APU with Radeon HD Graphics ‖ RAM 3555 MiB ‖ Sony Corporation VAIO
4 AMD nee ATI Wrestler [Radeon HD 6320] [1002:9806] {fglrx_pci}
5 eth0: Atheros Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) ⋮ wlan0: Atheros Inc. AR9285 [168c:002b] (rev 01)
Φτιάξτε και εσείς τη δική σας υπογραφή (παραπάνω κείμενο) αυτόματα με κλικ εδώ!
simosx
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10334
Εγγραφή: 11 Μάιος 2008, 18:52
Launchpad: simosx
IRC: simosx
Εκτύπωση

Re: Βοήθεια με tv tuner

Δημοσίευσηαπό argy1 » 25 Απρ 2012, 17:35

Ψιλο-δουλευει,δηλαδη πιανει 2-3 καναλια και αυτα μαυροασπρα και χωρις ηχο,ειναι μια προοδος ομως.Η καρτα παντως ειναι συνδεμενη στην κεραια και εψαξα λιγο τις ρυθμισεις αλλα δεν αλλαζει κατι.Επισης το dmesg
Κώδικας: Επιλογή όλων
[ 1111.293780] cx88[0]: cmds: iq rd ptr : 0x00000101
[ 1111.293783] cx88[0]: cmds: cdt current : 0x00000458
[ 1111.293787] cx88[0]: cmds: pci target : 0x00000000
[ 1111.293790] cx88[0]: cmds: line / byte : 0x00000000
[ 1111.293793] cx88[0]: risc0: 0x80008000 [ sync resync count=0 ]
[ 1111.293798] cx88[0]: risc1: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.293803] cx88[0]: risc2: 0xb8067000 [ arg #1 ]
[ 1111.293806] cx88[0]: risc3: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.293811] cx88[0]: iq 0: 0x80008000 [ sync resync count=0 ]
[ 1111.293815] cx88[0]: iq 1: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.293820] cx88[0]: iq 2: 0xb8067000 [ arg #1 ]
[ 1111.293823] cx88[0]: iq 3: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.293828] cx88[0]: iq 4: 0xb8067900 [ arg #1 ]
[ 1111.293831] cx88[0]: iq 5: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.293836] cx88[0]: iq 6: 0xb8066200 [ arg #1 ]
[ 1111.293839] cx88[0]: iq 7: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.293844] cx88[0]: iq 8: 0xb8066b00 [ arg #1 ]
[ 1111.293847] cx88[0]: iq 9: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.293852] cx88[0]: iq a: 0xb8065400 [ arg #1 ]
[ 1111.293854] cx88[0]: iq b: 0x18000300 [ write sol count=768 ]
[ 1111.293859] cx88[0]: iq c: 0xb8065d00 [ arg #1 ]
[ 1111.293862] cx88[0]: iq d: 0xb8067d80 [ writerm sol 18 cnt1 14 13 12 count=3456 ]
[ 1111.293869] cx88[0]: iq e: 0x14000200 [ arg #1 ]
[ 1111.293872] cx88[0]: iq f: 0xb8066000 [ arg #2 ]
[ 1111.293874] cx88[0]: fifo: 0x00180c00 -> 0x183400
[ 1111.293876] cx88[0]: ctrl: 0x00180400 -> 0x180460
[ 1111.293878] cx88[0]: ptr1_reg: 0x00181c30
[ 1111.293881] cx88[0]: ptr2_reg: 0x00180478
[ 1111.293883] cx88[0]: cnt1_reg: 0x00000063
[ 1111.293885] cx88[0]: cnt2_reg: 0x00000000
[ 1111.293892] cx88[0]/0: [ffff88012b01f600/0] timeout - dma=0xce4fc000
[ 1111.293895] cx88[0]/0: [ffff88012b01f000/1] timeout - dma=0xb829e000
[ 1111.293898] cx88[0]/0: [ffff88012b01e800/2] timeout - dma=0xce59e000
[ 1111.293901] cx88[0]/0: [ffff88012b01f400/3] timeout - dma=0xce41e000
[ 1111.790006] cx88[0]: video y / packed - dma channel status dump
[ 1111.790010] cx88[0]: cmds: initial risc: 0xce41e000
[ 1111.790013] cx88[0]: cmds: cdt base : 0x00180440
[ 1111.790016] cx88[0]: cmds: cdt size : 0x0000000c
[ 1111.790018] cx88[0]: cmds: iq base : 0x00180400
[ 1111.790021] cx88[0]: cmds: iq size : 0x00000010
[ 1111.790023] cx88[0]: cmds: risc pc : 0xce41e034
[ 1111.790026] cx88[0]: cmds: iq wr ptr : 0x0000010d
[ 1111.790029] cx88[0]: cmds: iq rd ptr : 0x00000101
[ 1111.790031] cx88[0]: cmds: cdt current : 0x00000478
[ 1111.790034] cx88[0]: cmds: pci target : 0x00000000
[ 1111.790036] cx88[0]: cmds: line / byte : 0x00000000
[ 1111.790039] cx88[0]: risc0: 0x80008000 [ sync resync count=0 ]
[ 1111.790044] cx88[0]: risc1: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.790049] cx88[0]: risc2: 0xb8067000 [ arg #1 ]
[ 1111.790052] cx88[0]: risc3: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.790057] cx88[0]: iq 0: 0x80008000 [ sync resync count=0 ]
[ 1111.790061] cx88[0]: iq 1: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.790067] cx88[0]: iq 2: 0xb8067000 [ arg #1 ]
[ 1111.790069] cx88[0]: iq 3: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.790075] cx88[0]: iq 4: 0xb8067900 [ arg #1 ]
[ 1111.790077] cx88[0]: iq 5: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.790082] cx88[0]: iq 6: 0xb8066200 [ arg #1 ]
[ 1111.790085] cx88[0]: iq 7: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.790090] cx88[0]: iq 8: 0xb8066b00 [ arg #1 ]
[ 1111.790093] cx88[0]: iq 9: 0x1c000480 [ write sol eol count=1152 ]
[ 1111.790098] cx88[0]: iq a: 0xb8065400 [ arg #1 ]
[ 1111.790100] cx88[0]: iq b: 0x18000300 [ write sol count=768 ]
[ 1111.790105] cx88[0]: iq c: 0xb8065d00 [ arg #1 ]
[ 1111.790108] cx88[0]: iq d: 0xb8067d80 [ writerm sol 18 cnt1 14 13 12 count=3456 ]
[ 1111.790115] cx88[0]: iq e: 0x14000200 [ arg #1 ]
[ 1111.790118] cx88[0]: iq f: 0xb8066000 [ arg #2 ]
[ 1111.790120] cx88[0]: fifo: 0x00180c00 -> 0x183400
[ 1111.790121] cx88[0]: ctrl: 0x00180400 -> 0x180460
[ 1111.790124] cx88[0]: ptr1_reg: 0x00182140
[ 1111.790126] cx88[0]: ptr2_reg: 0x00180488
[ 1111.790129] cx88[0]: cnt1_reg: 0x00000075
[ 1111.790131] cx88[0]: cnt2_reg: 0x00000000
[ 1111.790137] cx88[0]/0: [ffff88012b01f600/0] timeout - dma=0xce41e000
[ 1111.790139] cx88[0]/0: [ffff88012b01f000/1] timeout - dma=0xce59e000
[ 1111.790142] cx88[0]/0: [ffff88012b01e800/2] timeout - dma=0xb829e000
[ 1111.790145] cx88[0]/0: [ffff88012b01f400/3] timeout - dma=0xce4fc000
[ 1112.290005] cx88[0]: video y / packed - dma channel status dump
[ 1112.290010] cx88[0]: cmds: initial risc: 0xce4fc000
[ 1112.290013] cx88[0]: cmds: cdt base : 0x00180440
[ 1112.290016] cx88[0]: cmds: cdt size : 0x0000000c
[ 1112.290019] cx88[0]: cmds: iq base : 0x00180400
[ 1112.290021] cx88[0]: cmds: iq size : 0x00000010
[ 1112.290024] cx88[0]: cmds: risc pc : 0xce4fc034
[ 1112.290027] cx88[0]: cmds: iq wr ptr : 0x0000010d
[ 1112.290029] cx88[0]: cmds: iq rd ptr : 0x00000101
[ 1112.290032] cx88[0]: cmds: cdt current : 0x00000458
[ 1112.290035] cx88[0]: cmds: pci target : 0x00000000
[ 1112.290037] cx88[0]: cmds: line / byte : 0x00000000
[ 1112.290040] cx88[0]: risc0: 0x80008000 [ sync resync count=0 ]
[ 1112.290045] cx88[0]: risc1: 0x1c000480 [ write sol eol count=1152 ]
[ 1112.290050] cx88[0]: risc2: 0xb8067000 [ arg #1 ]
[ 1112.290053] cx88[0]: risc3: 0x1c000480 [ write sol eol count=1152 ]
[ 1112.290058] cx88[0]: iq 0: 0x80008000 [ sync resync count=0 ]
[ 1112.290062] cx88[0]: iq 1: 0x1c000480 [ write sol eol count=1152 ]
[ 1112.290068] cx88[0]: iq 2: 0xb8067000 [ arg #1 ]
[ 1112.290070] cx88[0]: iq 3: 0x1c000480 [ write sol eol count=1152 ]
[ 1112.290076] cx88[0]: iq 4: 0xb8067900 [ arg #1 ]
[ 1112.290078] cx88[0]: iq 5: 0x1c000480 [ write sol eol count=1152 ]
[ 1112.290084] cx88[0]: iq 6: 0xb8066200 [ arg #1 ]
[ 1112.290086] cx88[0]: iq 7: 0x1c000480 [ write sol eol count=1152 ]
[ 1112.290091] cx88[0]: iq 8: 0xb8066b00 [ arg #1 ]
[ 1112.290094] cx88[0]: iq 9: 0x1c000480 [ write sol eol count=1152 ]
[ 1112.290099] cx88[0]: iq a: 0xb8065400 [ arg #1 ]
[ 1112.290102] cx88[0]: iq b: 0x18000300 [ write sol count=768 ]
[ 1112.290106] cx88[0]: iq c: 0xb8065d00 [ arg #1 ]
[ 1112.290109] cx88[0]: iq d: 0xb8067d80 [ writerm sol 18 cnt1 14 13 12 count=3456 ]
[ 1112.290116] cx88[0]: iq e: 0x14000200 [ arg #1 ]
[ 1112.290119] cx88[0]: iq f: 0xb8066000 [ arg #2 ]
[ 1112.290121] cx88[0]: fifo: 0x00180c00 -> 0x183400
[ 1112.290123] cx88[0]: ctrl: 0x00180400 -> 0x180460
[ 1112.290125] cx88[0]: ptr1_reg: 0x00181ae8
[ 1112.290128] cx88[0]: ptr2_reg: 0x00180478
[ 1112.290130] cx88[0]: cnt1_reg: 0x0000003a
[ 1112.290132] cx88[0]: cnt2_reg: 0x00000000
[ 1112.290138] cx88[0]/0: [ffff88012b01f600/0] timeout - dma=0xce4fc000
[ 1112.290141] cx88[0]/0: [ffff88012b01f000/1] timeout - dma=0xb829e000
[ 1112.290144] cx88[0]/0: [ffff88012b01e800/2] timeout - dma=0xce59e000
[ 1112.290147] cx88[0]/0: [ffff88012b01f400/3] timeout - dma=0xce41e000
[ 1119.265538] cx88[0]/0: tvaudio support needs work for this tv norm [PAL-60], sorry
[ 1119.760008] cx88[0]: video y / packed - dma channel status dump
[ 1119.760013] cx88[0]: cmds: initial risc: 0xb804e000
[ 1119.760016] cx88[0]: cmds: cdt base : 0x00180440
[ 1119.760019] cx88[0]: cmds: cdt size : 0x0000000c
[ 1119.760022] cx88[0]: cmds: iq base : 0x00180400
[ 1119.760024] cx88[0]: cmds: iq size : 0x00000010
[ 1119.760027] cx88[0]: cmds: risc pc : 0xb804e034
[ 1119.760030] cx88[0]: cmds: iq wr ptr : 0x0000010d
[ 1119.760032] cx88[0]: cmds: iq rd ptr : 0x00000101
[ 1119.760035] cx88[0]: cmds: cdt current : 0x00000478
[ 1119.760037] cx88[0]: cmds: pci target : 0x00000000
[ 1119.760040] cx88[0]: cmds: line / byte : 0x00000000
[ 1119.760043] cx88[0]: risc0: 0x80008000 [ sync resync count=0 ]
[ 1119.760048] cx88[0]: risc1: 0x1c000480 [ write sol eol count=1152 ]
[ 1119.760053] cx88[0]: risc2: 0xce673000 [ arg #1 ]
[ 1119.760056] cx88[0]: risc3: 0x1c000480 [ write sol eol count=1152 ]
[ 1119.760061] cx88[0]: iq 0: 0x80008000 [ sync resync count=0 ]
[ 1119.760065] cx88[0]: iq 1: 0x1c000480 [ write sol eol count=1152 ]
[ 1119.760070] cx88[0]: iq 2: 0xce673000 [ arg #1 ]
[ 1119.760073] cx88[0]: iq 3: 0x1c000480 [ write sol eol count=1152 ]
[ 1119.760078] cx88[0]: iq 4: 0xce673900 [ arg #1 ]
[ 1119.760081] cx88[0]: iq 5: 0x1c000480 [ write sol eol count=1152 ]
[ 1119.760086] cx88[0]: iq 6: 0xce5c7200 [ arg #1 ]
[ 1119.760089] cx88[0]: iq 7: 0x1c000480 [ write sol eol count=1152 ]
[ 1119.760094] cx88[0]: iq 8: 0xce5c7b00 [ arg #1 ]
[ 1119.760097] cx88[0]: iq 9: 0x1c000480 [ write sol eol count=1152 ]
[ 1119.760102] cx88[0]: iq a: 0x37a85400 [ arg #1 ]
[ 1119.760104] cx88[0]: iq b: 0x18000300 [ write sol count=768 ]
[ 1119.760109] cx88[0]: iq c: 0x37a85d00 [ arg #1 ]
[ 1119.760112] cx88[0]: iq d: 0xb8067d80 [ writerm sol 18 cnt1 14 13 12 count=3456 ]
[ 1119.760119] cx88[0]: iq e: 0x14000200 [ arg #1 ]
[ 1119.760122] cx88[0]: iq f: 0xb8066000 [ arg #2 ]
[ 1119.760124] cx88[0]: fifo: 0x00180c00 -> 0x183400
[ 1119.760126] cx88[0]: ctrl: 0x00180400 -> 0x180460
[ 1119.760128] cx88[0]: ptr1_reg: 0x00182280
[ 1119.760131] cx88[0]: ptr2_reg: 0x00180498
[ 1119.760133] cx88[0]: cnt1_reg: 0x00000000
[ 1119.760135] cx88[0]: cnt2_reg: 0x00000000
[ 1119.760142] cx88[0]/0: [ffff88012b01e400/0] timeout - dma=0xb804e000
[ 1119.760145] cx88[0]/0: [ffff88012b01ec00/1] timeout - dma=0xb8070000
[ 1119.760148] cx88[0]/0: [ffff88012b01e600/2] timeout - dma=0x37898000
[ 1119.760151] cx88[0]/0: [ffff88012b01f400/3] timeout - dma=0xb80ac000
[ 1119.760277] cx88[0]/0: tvaudio support needs work for this tv norm [PAL-60], sorry
[ 1120.260008] cx88[0]: video y / packed - dma channel status dump
[ 1120.260014] cx88[0]: cmds: initial risc: 0x37898000
[ 1120.260017] cx88[0]: cmds: cdt base : 0x00180440
[ 1120.260020] cx88[0]: cmds: cdt size : 0x0000000c
[ 1120.260023] cx88[0]: cmds: iq base : 0x00180400
[ 1120.260025] cx88[0]: cmds: iq size : 0x00000010
[ 1120.260028] cx88[0]: cmds: risc pc : 0x37898034
[ 1120.260031] cx88[0]: cmds: iq wr ptr : 0x0000010d
[ 1120.260033] cx88[0]: cmds: iq rd ptr : 0x00000101
[ 1120.260036] cx88[0]: cmds: cdt current : 0x00000468
[ 1120.260038] cx88[0]: cmds: pci target : 0x00000000
[ 1120.260041] cx88[0]: cmds: line / byte : 0x00000000
[ 1120.260044] cx88[0]: risc0: 0x80008000 [ sync resync count=0 ]
[ 1120.260049] cx88[0]: risc1: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.260054] cx88[0]: risc2: 0xce673000 [ arg #1 ]
[ 1120.260057] cx88[0]: risc3: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.260062] cx88[0]: iq 0: 0x80008000 [ sync resync count=0 ]
[ 1120.260066] cx88[0]: iq 1: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.260072] cx88[0]: iq 2: 0xce673000 [ arg #1 ]
[ 1120.260074] cx88[0]: iq 3: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.260079] cx88[0]: iq 4: 0xce673900 [ arg #1 ]
[ 1120.260082] cx88[0]: iq 5: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.260087] cx88[0]: iq 6: 0xce5c7200 [ arg #1 ]
[ 1120.260090] cx88[0]: iq 7: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.260095] cx88[0]: iq 8: 0xce5c7b00 [ arg #1 ]
[ 1120.260098] cx88[0]: iq 9: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.260103] cx88[0]: iq a: 0x37a85400 [ arg #1 ]
[ 1120.260105] cx88[0]: iq b: 0x18000300 [ write sol count=768 ]
[ 1120.260110] cx88[0]: iq c: 0x37a85d00 [ arg #1 ]
[ 1120.260113] cx88[0]: iq d: 0xb8067d80 [ writerm sol 18 cnt1 14 13 12 count=3456 ]
[ 1120.260120] cx88[0]: iq e: 0x14000200 [ arg #1 ]
[ 1120.260123] cx88[0]: iq f: 0xb8066000 [ arg #2 ]
[ 1120.260125] cx88[0]: fifo: 0x00180c00 -> 0x183400
[ 1120.260127] cx88[0]: ctrl: 0x00180400 -> 0x180460
[ 1120.260129] cx88[0]: ptr1_reg: 0x00181e00
[ 1120.260131] cx88[0]: ptr2_reg: 0x00180488
[ 1120.260134] cx88[0]: cnt1_reg: 0x00000000
[ 1120.260136] cx88[0]: cnt2_reg: 0x00000000
[ 1120.260143] cx88[0]/0: [ffff88012b01e400/0] timeout - dma=0x37898000
[ 1120.260146] cx88[0]/0: [ffff88012b01ec00/1] timeout - dma=0xb8070000
[ 1120.260149] cx88[0]/0: [ffff88012b01e600/2] timeout - dma=0xb804e000
[ 1120.260151] cx88[0]/0: [ffff88012b01f400/3] timeout - dma=0xb80ac000
[ 1120.281259] cx88[0]/0: unknown tv audio mode [0]
[ 1120.780007] cx88[0]: video y / packed - dma channel status dump
[ 1120.780011] cx88[0]: cmds: initial risc: 0xb804e000
[ 1120.780014] cx88[0]: cmds: cdt base : 0x00180440
[ 1120.780017] cx88[0]: cmds: cdt size : 0x0000000c
[ 1120.780020] cx88[0]: cmds: iq base : 0x00180400
[ 1120.780022] cx88[0]: cmds: iq size : 0x00000010
[ 1120.780025] cx88[0]: cmds: risc pc : 0xb804e034
[ 1120.780028] cx88[0]: cmds: iq wr ptr : 0x0000010d
[ 1120.780030] cx88[0]: cmds: iq rd ptr : 0x00000101
[ 1120.780033] cx88[0]: cmds: cdt current : 0x00000478
[ 1120.780036] cx88[0]: cmds: pci target : 0x00000000
[ 1120.780038] cx88[0]: cmds: line / byte : 0x00000000
[ 1120.780041] cx88[0]: risc0: 0x80008000 [ sync resync count=0 ]
[ 1120.780046] cx88[0]: risc1: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.780051] cx88[0]: risc2: 0xce673000 [ arg #1 ]
[ 1120.780054] cx88[0]: risc3: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.780059] cx88[0]: iq 0: 0x80008000 [ sync resync count=0 ]
[ 1120.780064] cx88[0]: iq 1: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.780069] cx88[0]: iq 2: 0xce673000 [ arg #1 ]
[ 1120.780072] cx88[0]: iq 3: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.780077] cx88[0]: iq 4: 0xce673900 [ arg #1 ]
[ 1120.780079] cx88[0]: iq 5: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.780085] cx88[0]: iq 6: 0xce5c7200 [ arg #1 ]
[ 1120.780087] cx88[0]: iq 7: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.780093] cx88[0]: iq 8: 0xce5c7b00 [ arg #1 ]
[ 1120.780095] cx88[0]: iq 9: 0x1c000480 [ write sol eol count=1152 ]
[ 1120.780100] cx88[0]: iq a: 0x37a85400 [ arg #1 ]
[ 1120.780103] cx88[0]: iq b: 0x18000300 [ write sol count=768 ]
[ 1120.780108] cx88[0]: iq c: 0x37a85d00 [ arg #1 ]
[ 1120.780110] cx88[0]: iq d: 0xb8067d80 [ writerm sol 18 cnt1 14 13 12 count=3456 ]
[ 1120.780118] cx88[0]: iq e: 0x14000200 [ arg #1 ]
[ 1120.780120] cx88[0]: iq f: 0xb8066000 [ arg #2 ]
[ 1120.780122] cx88[0]: fifo: 0x00180c00 -> 0x183400
[ 1120.780124] cx88[0]: ctrl: 0x00180400 -> 0x180460
[ 1120.780126] cx88[0]: ptr1_reg: 0x00182320
[ 1120.780129] cx88[0]: ptr2_reg: 0x00180498
[ 1120.780131] cx88[0]: cnt1_reg: 0x00000021
[ 1120.780134] cx88[0]: cnt2_reg: 0x00000000
[ 1120.780139] cx88[0]/0: [ffff88012b01e400/0] timeout - dma=0xb804e000
[ 1120.780142] cx88[0]/0: [ffff88012b01ec00/1] timeout - dma=0xb8070000
[ 1120.780145] cx88[0]/0: [ffff88012b01e600/2] timeout - dma=0x37898000
[ 1120.780147] cx88[0]/0: [ffff88012b01f400/3] timeout - dma=0xb80ac000
[ 1121.280007] cx88[0]: video y / packed - dma channel status dump
[ 1121.280011] cx88[0]: cmds: initial risc: 0x37898000
[ 1121.280014] cx88[0]: cmds: cdt base : 0x00180440
[ 1121.280017] cx88[0]: cmds: cdt size : 0x0000000c
[ 1121.280019] cx88[0]: cmds: iq base : 0x00180400
[ 1121.280022] cx88[0]: cmds: iq size : 0x00000010
[ 1121.280025] cx88[0]: cmds: risc pc : 0x37898034
[ 1121.280027] cx88[0]: cmds: iq wr ptr : 0x0000010d
[ 1121.280030] cx88[0]: cmds: iq rd ptr : 0x00000101
[ 1121.280032] cx88[0]: cmds: cdt current : 0x00000488
[ 1121.280035] cx88[0]: cmds: pci target : 0x00000000
[ 1121.280038] cx88[0]: cmds: line / byte : 0x00000000
[ 1121.280040] cx88[0]: risc0: 0x80008000 [ sync resync count=0 ]
[ 1121.280045] cx88[0]: risc1: 0x1c000480 [ write sol eol count=1152 ]
[ 1121.280050] cx88[0]: risc2: 0xce673000 [ arg #1 ]
[ 1121.280053] cx88[0]: risc3: 0x1c000480 [ write sol eol count=1152 ]
[ 1121.280058] cx88[0]: iq 0: 0x80008000 [ sync resync count=0 ]
[ 1121.280062] cx88[0]: iq 1: 0x1c000480 [ write sol eol count=1152 ]
[ 1121.280068] cx88[0]: iq 2: 0xce673000 [ arg #1 ]
[ 1121.280070] cx88[0]: iq 3: 0x1c000480 [ write sol eol count=1152 ]
[ 1121.280076] cx88[0]: iq 4: 0xce673900 [ arg #1 ]
[ 1121.280078] cx88[0]: iq 5: 0x1c000480 [ write sol eol count=1152 ]
[ 1121.280084] cx88[0]: iq 6: 0xce5c7200 [ arg #1 ]
[ 1121.280086] cx88[0]: iq 7: 0x1c000480 [ write sol eol count=1152 ]
[ 1121.280091] cx88[0]: iq 8: 0xce5c7b00 [ arg #1 ]
[ 1121.280094] cx88[0]: iq 9: 0x1c000480 [ write sol eol count=1152 ]
[ 1121.280099] cx88[0]: iq a: 0x37a85400 [ arg #1 ]
[ 1121.280102] cx88[0]: iq b: 0x18000300 [ write sol count=768 ]
[ 1121.280107] cx88[0]: iq c: 0x37a85d00 [ arg #1 ]
[ 1121.280109] cx88[0]: iq d: 0xb8067d80 [ writerm sol 18 cnt1 14 13 12 count=3456 ]
[ 1121.280116] cx88[0]: iq e: 0x14000200 [ arg #1 ]
[ 1121.280119] cx88[0]: iq f: 0xb8066000 [ arg #2 ]
[ 1121.280121] cx88[0]: fifo: 0x00180c00 -> 0x183400
[ 1121.280123] cx88[0]: ctrl: 0x00180400 -> 0x180460
[ 1121.280126] cx88[0]: ptr1_reg: 0x00180c00
[ 1121.280128] cx88[0]: ptr2_reg: 0x00180448
[ 1121.280130] cx88[0]: cnt1_reg: 0x00000000
[ 1121.280133] cx88[0]: cnt2_reg: 0x00000000
[ 1121.280138] cx88[0]/0: [ffff88012b01e400/0] timeout - dma=0x37898000
[ 1121.280141] cx88[0]/0: [ffff88012b01ec00/1] timeout - dma=0xb8070000
[ 1121.280144] cx88[0]/0: [ffff88012b01e600/2] timeout - dma=0xb804e000
[ 1121.280147] cx88[0]/0: [ffff88012b01f400/3] timeout - dma=0xb80ac000
[ 1121.781259] cx88[0]: video y / packed - dma channel status dump
[ 1121.781265] cx88[0]: cmds: initial risc: 0xb804e000
[ 1121.781268] cx88[0]: cmds: cdt base : 0x00180440
[ 1121.781270] cx88[0]: cmds: cdt size : 0x0000000c
[ 1121.781273] cx88[0]: cmds: iq base : 0x00180400
[ 1121.781275] cx88[0]: cmds: iq size : 0x00000010
[ 1121.781278] cx88[0]: cmds: risc pc : 0xb804e998
[ 1121.781281] cx88[0]: cmds: iq wr ptr : 0x00000106
[ 1121.781283] cx88[0]: cmds: iq rd ptr : 0x0000010a
[ 1121.781286] cx88[0]: cmds: cdt current : 0x00000448
[ 1121.781288] cx88[0]: cmds: pci target : 0x3780bb80
[ 1121.781291] cx88[0]: cmds: line / byte : 0x00f00000
[ 1121.781294] cx88[0]: risc0: 0x80008200 [ sync resync count=512 ]
[ 1121.781299] cx88[0]: risc1: 0x1c000480 [ write sol eol count=1152 ]
[ 1121.781304] cx88[0]: risc2: 0xce673480 [ arg #1 ]
[ 1121.781307] cx88[0]: risc3: 0x18000280 [ write sol count=640 ]
[ 1121.781311] cx88[0]: iq 0: 0x1c000480 [ write sol eol count=1152 ]
[ 1121.781317] cx88[0]: iq 1: 0xce5c7680 [ arg #1 ]
[ 1121.781319] cx88[0]: iq 2: 0x18000080 [ write sol count=128 ]
[ 1121.781324] cx88[0]: iq 3: 0xce5c7f80 [ arg #1 ]
[ 1121.781327] cx88[0]: iq 4: 0x14000400 [ write eol count=1024 ]
[ 1121.781332] cx88[0]: iq 5: 0x37a85000 [ arg #1 ]
[ 1121.781334] cx88[0]: iq 6: 0x3780b000 [ INVALID eol irq2 irq1 23 resync 13 12 count=0 ]
[ 1121.781341] cx88[0]: iq 7: 0x1c000480 [ write sol eol count=1152 ]
[ 1121.781347] cx88[0]: iq 8: 0x3780b700 [ arg #1 ]
[ 1121.781349] cx88[0]: iq 9: 0x80008200 [ sync resync count=512 ]
[ 1121.781354] cx88[0]: iq a: 0x1c000480 [ write sol eol count=1152 ]
[ 1121.781359] cx88[0]: iq b: 0xce673480 [ arg #1 ]
[ 1121.781361] cx88[0]: iq c: 0x18000280 [ write sol count=640 ]
[ 1121.781366] cx88[0]: iq d: 0xce673d80 [ arg #1 ]
[ 1121.781369] cx88[0]: iq e: 0x14000200 [ write eol count=512 ]
[ 1121.781374] cx88[0]: iq f: 0xce5c7000 [ arg #1 ]
[ 1121.781376] cx88[0]: fifo: 0x00180c00 -> 0x183400
[ 1121.781377] cx88[0]: ctrl: 0x00180400 -> 0x180460
[ 1121.781380] cx88[0]: ptr1_reg: 0x00181500
[ 1121.781382] cx88[0]: ptr2_reg: 0x00180468
[ 1121.781385] cx88[0]: cnt1_reg: 0x00000000
[ 1121.781387] cx88[0]: cnt2_reg: 0x00000000
[ 1121.781392] cx88[0]/0: [ffff88012b01e400/0] timeout - dma=0xb804e000
[ 1121.781395] cx88[0]/0: [ffff88012b01ec00/1] timeout - dma=0xb8070000
[ 1121.781398] cx88[0]/0: [ffff88012b01e600/2] timeout - dma=0x37898000
[ 1121.781401] cx88[0]/0: [ffff88012b01f400/3] timeout - dma=0xb80ac000
[ 1167.770007] cx88[0]: video y / packed - dma channel status dump
[ 1167.770011] cx88[0]: cmds: initial risc: 0x37986000
[ 1167.770014] cx88[0]: cmds: cdt base : 0x00180440
[ 1167.770017] cx88[0]: cmds: cdt size : 0x0000000c
[ 1167.770020] cx88[0]: cmds: iq base : 0x00180400
[ 1167.770022] cx88[0]: cmds: iq size : 0x00000010
[ 1167.770025] cx88[0]: cmds: risc pc : 0xce4d2b78
[ 1167.770028] cx88[0]: cmds: iq wr ptr : 0x00000104
[ 1167.770030] cx88[0]: cmds: iq rd ptr : 0x00000108
[ 1167.770033] cx88[0]: cmds: cdt current : 0x00000468
[ 1167.770036] cx88[0]: cmds: pci target : 0xb82e0b80
[ 1167.770038] cx88[0]: cmds: line / byte : 0x01200000
[ 1167.770041] cx88[0]: risc0: 0x80008200 [ sync resync count=512 ]
[ 1167.770046] cx88[0]: risc1: 0x1c000480 [ write sol eol count=1152 ]
[ 1167.770051] cx88[0]: risc2: 0xce561480 [ arg #1 ]
[ 1167.770054] cx88[0]: risc3: 0x18000280 [ write sol count=640 ]
[ 1167.770059] cx88[0]: iq 0: 0x18000080 [ write sol count=128 ]
[ 1167.770063] cx88[0]: iq 1: 0xb826af80 [ arg #1 ]
[ 1167.770066] cx88[0]: iq 2: 0x14000400 [ write eol count=1024 ]
[ 1167.770071] cx88[0]: iq 3: 0xb826b000 [ arg #1 ]
[ 1167.770073] cx88[0]: iq 4: 0xb82e0000 [ writerm sol 21 19 18 cnt1 count=0 ]
[ 1167.770080] cx88[0]: iq 5: 0x1c000480 [ arg #1 ]
[ 1167.770083] cx88[0]: iq 6: 0xb82e0700 [ arg #2 ]
[ 1167.770085] cx88[0]: iq 7: 0x80008200 [ sync resync count=512 ]
[ 1167.770090] cx88[0]: iq 8: 0x1c000480 [ write sol eol count=1152 ]
[ 1167.770095] cx88[0]: iq 9: 0xce561480 [ arg #1 ]
[ 1167.770098] cx88[0]: iq a: 0x18000280 [ write sol count=640 ]
[ 1167.770103] cx88[0]: iq b: 0xce561d80 [ arg #1 ]
[ 1167.770105] cx88[0]: iq c: 0x14000200 [ write eol count=512 ]
[ 1167.770110] cx88[0]: iq d: 0xb826a000 [ arg #1 ]
[ 1167.770112] cx88[0]: iq e: 0x1c000480 [ write sol eol count=1152 ]
[ 1167.770118] cx88[0]: iq f: 0xb826a680 [ arg #1 ]
[ 1167.770120] cx88[0]: fifo: 0x00180c00 -> 0x183400
[ 1167.770121] cx88[0]: ctrl: 0x00180400 -> 0x180460
[ 1167.770124] cx88[0]: ptr1_reg: 0x00181cf8
[ 1167.770126] cx88[0]: ptr2_reg: 0x00180478
[ 1167.770129] cx88[0]: cnt1_reg: 0x0000007c
[ 1167.770131] cx88[0]: cnt2_reg: 0x00000000
[ 1167.770137] cx88[0]/0: [ffff880128457600/2] timeout - dma=0xce4d2000
[ 1167.770140] cx88[0]/0: [ffff880128457200/3] timeout - dma=0xce57c000
[ 1415.210008] cx88[0]: video y / packed - dma channel status dump
[ 1415.210014] cx88[0]: cmds: initial risc: 0xce4d2000
[ 1415.210017] cx88[0]: cmds: cdt base : 0x00180440
[ 1415.210020] cx88[0]: cmds: cdt size : 0x0000000c
[ 1415.210023] cx88[0]: cmds: iq base : 0x00180400
[ 1415.210025] cx88[0]: cmds: iq size : 0x00000010
[ 1415.210028] cx88[0]: cmds: risc pc : 0xce57cb78
[ 1415.210031] cx88[0]: cmds: iq wr ptr : 0x00000107
[ 1415.210033] cx88[0]: cmds: iq rd ptr : 0x0000010b
[ 1415.210036] cx88[0]: cmds: cdt current : 0x00000488
[ 1415.210039] cx88[0]: cmds: pci target : 0xb807ab80
[ 1415.210041] cx88[0]: cmds: line / byte : 0x01200000
[ 1415.210044] cx88[0]: risc0: 0x80008200 [ sync resync count=512 ]
[ 1415.210049] cx88[0]: risc1: 0x1c000480 [ write sol eol count=1152 ]
[ 1415.210054] cx88[0]: risc2: 0xb82e3480 [ arg #1 ]
[ 1415.210057] cx88[0]: risc3: 0x18000280 [ write sol count=640 ]
[ 1415.210062] cx88[0]: iq 0: 0xb8260000 [ writerm sol 21 18 cnt1 count=0 ]
[ 1415.210068] cx88[0]: iq 1: 0x1c000480 [ arg #1 ]
[ 1415.210071] cx88[0]: iq 2: 0xb8260680 [ arg #2 ]
[ 1415.210074] cx88[0]: iq 3: 0x18000080 [ write sol count=128 ]
[ 1415.210078] cx88[0]: iq 4: 0xb8260f80 [ arg #1 ]
[ 1415.210081] cx88[0]: iq 5: 0x14000400 [ write eol count=1024 ]
[ 1415.210086] cx88[0]: iq 6: 0xb8261000 [ arg #1 ]
[ 1415.210088] cx88[0]: iq 7: 0xb807a000 [ writerm sol 18 cnt1 cnt0 resync 13 count=0 ]
[ 1415.210095] cx88[0]: iq 8: 0x1c000480 [ arg #1 ]
[ 1415.210098] cx88[0]: iq 9: 0xb807a700 [ arg #2 ]
[ 1415.210101] cx88[0]: iq a: 0x80008200 [ sync resync count=512 ]
[ 1415.210105] cx88[0]: iq b: 0x1c000480 [ write sol eol count=1152 ]
[ 1415.210111] cx88[0]: iq c: 0xb82e3480 [ arg #1 ]
[ 1415.210113] cx88[0]: iq d: 0x18000280 [ write sol count=640 ]
[ 1415.210118] cx88[0]: iq e: 0xb82e3d80 [ arg #1 ]
[ 1415.210120] cx88[0]: iq f: 0x14000200 [ write eol count=512 ]
[ 1415.210125] cx88[0]: iq 10: 0x00180c00 [ arg #1 ]
[ 1415.210127] cx88[0]: fifo: 0x00180c00 -> 0x183400
[ 1415.210129] cx88[0]: ctrl: 0x00180400 -> 0x180460
[ 1415.210132] cx88[0]: ptr1_reg: 0x00180c00
[ 1415.210134] cx88[0]: ptr2_reg: 0x00180448
[ 1415.210136] cx88[0]: cnt1_reg: 0x00000000
[ 1415.210139] cx88[0]: cnt2_reg: 0x00000000
[ 1415.210146] cx88[0]/0: [ffff880128457200/3] timeout - dma=0xce57c000
[ 1444.230008] cx88[0]: video y / packed - dma channel status dump
[ 1444.230014] cx88[0]: cmds: initial risc: 0xb825c000
[ 1444.230017] cx88[0]: cmds: cdt base : 0x00180440
[ 1444.230020] cx88[0]: cmds: cdt size : 0x0000000c
[ 1444.230022] cx88[0]: cmds: iq base : 0x00180400
[ 1444.230025] cx88[0]: cmds: iq size : 0x00000010
[ 1444.230028] cx88[0]: cmds: risc pc : 0xb825cb78
[ 1444.230030] cx88[0]: cmds: iq wr ptr : 0x0000010e
[ 1444.230033] cx88[0]: cmds: iq rd ptr : 0x00000102
[ 1444.230035] cx88[0]: cmds: cdt current : 0x00000458
[ 1444.230038] cx88[0]: cmds: pci target : 0xce4d6b80
[ 1444.230041] cx88[0]: cmds: line / byte : 0x01200000
[ 1444.230043] cx88[0]: risc0: 0x80008200 [ sync resync count=512 ]
[ 1444.230048] cx88[0]: risc1: 0x1c000480 [ write sol eol count=1152 ]
[ 1444.230053] cx88[0]: risc2: 0xce41d480 [ arg #1 ]
[ 1444.230057] cx88[0]: risc3: 0x18000280 [ write sol count=640 ]
[ 1444.230061] cx88[0]: iq 0: 0xce4d6700 [ writecm sol eol irq2 22 19 18 cnt0 14 13 count=1792 ]
[ 1444.230070] cx88[0]: iq 1: 0x80008200 [ arg #1 ]
[ 1444.230073] cx88[0]: iq 2: 0x1c000480 [ arg #2 ]
[ 1444.230075] cx88[0]: iq 3: 0xce41d480 [ writecm sol eol irq2 22 cnt0 resync 14 12 count=1152 ]
[ 1444.230083] cx88[0]: iq 4: 0x18000280 [ arg #1 ]
[ 1444.230086] cx88[0]: iq 5: 0xce41dd80 [ arg #2 ]
[ 1444.230089] cx88[0]: iq 6: 0x14000200 [ write eol count=512 ]
[ 1444.230094] cx88[0]: iq 7: 0x378e6000 [ arg #1 ]
[ 1444.230096] cx88[0]: iq 8: 0x1c000480 [ write sol eol count=1152 ]
[ 1444.230101] cx88[0]: iq 9: 0x378e6680 [ arg #1 ]
[ 1444.230104] cx88[0]: iq a: 0x18000080 [ write sol count=128 ]
[ 1444.230109] cx88[0]: iq b: 0x378e6f80 [ arg #1 ]
[ 1444.230111] cx88[0]: iq c: 0x14000400 [ write eol count=1024 ]
[ 1444.230116] cx88[0]: iq d: 0xce683000 [ arg #1 ]
[ 1444.230118] cx88[0]: iq e: 0xce4d6000 [ writecm sol eol irq2 22 19 18 cnt0 14 13 count=0 ]
[ 1444.230127] cx88[0]: iq f: 0x1c000480 [ arg #1 ]
[ 1444.230130] cx88[0]: iq 10: 0x00180c00 [ arg #2 ]
[ 1444.230132] cx88[0]: fifo: 0x00180c00 -> 0x183400
[ 1444.230133] cx88[0]: ctrl: 0x00180400 -> 0x180460
[ 1444.230136] cx88[0]: ptr1_reg: 0x00181080
[ 1444.230138] cx88[0]: ptr2_reg: 0x00180458
[ 1444.230141] cx88[0]: cnt1_reg: 0x00000000
[ 1444.230143] cx88[0]: cnt2_reg: 0x00000000
[ 1444.230150] cx88[0]/0: [ffff880128457000/0] timeout - dma=0xb825c000
[ 1444.230153] cx88[0]/0: [ffff880128456800/1] timeout - dma=0xce700000
[ 1444.230156] cx88[0]/0: [ffff880128457600/2] timeout - dma=0xce4d2000
[ 1444.230159] cx88[0]/0: [ffff880128457200/3] timeout - dma=0xb82b4000
[ 1447.611255] cx88[0]: video y / packed - dma channel status dump
[ 1447.611262] cx88[0]: cmds: initial risc: 0xb825c000
[ 1447.611264] cx88[0]: cmds: cdt base : 0x00180440
[ 1447.611267] cx88[0]: cmds: cdt size : 0x0000000c
[ 1447.611270] cx88[0]: cmds: iq base : 0x00180400
[ 1447.611272] cx88[0]: cmds: iq size : 0x00000010
[ 1447.611275] cx88[0]: cmds: risc pc : 0xb825c034
[ 1447.611278] cx88[0]: cmds: iq wr ptr : 0x0000010d
[ 1447.611280] cx88[0]: cmds: iq rd ptr : 0x00000101
[ 1447.611283] cx88[0]: cmds: cdt current : 0x00000488
[ 1447.611286] cx88[0]: cmds: pci target : 0x00000000
[ 1447.611288] cx88[0]: cmds: line / byte : 0x00000000
[ 1447.611291] cx88[0]: risc0: 0x80008000 [ sync resync count=0 ]
[ 1447.611296] cx88[0]: risc1: 0x1c000480 [ write sol eol count=1152 ]
[ 1447.611301] cx88[0]: risc2: 0xce41d000 [ arg #1 ]
[ 1447.611304] cx88[0]: risc3: 0x1c000480 [ write sol eol count=1152 ]
[ 1447.611309] cx88[0]: iq 0: 0x80008000 [ sync resync count=0 ]
[ 1447.611314] cx88[0]: iq 1: 0x1c000480 [ write sol eol count=1152 ]
[ 1447.611319] cx88[0]: iq 2: 0xce41d000 [ arg #1 ]
[ 1447.611322] cx88[0]: iq 3: 0x1c000480 [ write sol eol count=1152 ]
[ 1447.611327] cx88[0]: iq 4: 0xce41d900 [ arg #1 ]
[ 1447.611330] cx88[0]: iq 5: 0x1c000480 [ write sol eol count=1152 ]
[ 1447.611335] cx88[0]: iq 6: 0x378e6200 [ arg #1 ]
[ 1447.611337] cx88[0]: iq 7: 0x1c000480 [ write sol eol count=1152 ]
[ 1447.611343] cx88[0]: iq 8: 0x378e6b00 [ arg #1 ]
[ 1447.611345] cx88[0]: iq 9: 0x1c000480 [ write sol eol count=1152 ]
[ 1447.611351] cx88[0]: iq a: 0xce683400 [ arg #1 ]
[ 1447.611353] cx88[0]: iq b: 0x18000300 [ write sol count=768 ]
[ 1447.611358] cx88[0]: iq c: 0xce683d00 [ arg #1 ]
[ 1447.611360] cx88[0]: iq d: 0x1c000480 [ write sol eol count=1152 ]
[ 1447.611366] cx88[0]: iq e: 0xb8079980 [ arg #1 ]
[ 1447.611368] cx88[0]: iq f: 0x1c000480 [ write sol eol count=1152 ]
[ 1447.611374] cx88[0]: iq 10: 0x00180c00 [ arg #1 ]
[ 1447.611375] cx88[0]: fifo: 0x00180c00 -> 0x183400
[ 1447.611377] cx88[0]: ctrl: 0x00180400 -> 0x180460
[ 1447.611380] cx88[0]: ptr1_reg: 0x001825a8
[ 1447.611382] cx88[0]: ptr2_reg: 0x00180498
[ 1447.611384] cx88[0]: cnt1_reg: 0x00000072
[ 1447.611387] cx88[0]: cnt2_reg: 0x00000000
[ 1447.611394] cx88[0]/0: [ffff880128457000/0] timeout - dma=0xb825c000
[ 1447.611397] cx88[0]/0: [ffff880128456800/1] timeout - dma=0xce700000
[ 1447.611400] cx88[0]/0: [ffff880128457600/2] timeout - dma=0xce4d2000
[ 1447.611402] cx88[0]/0: [ffff880128457200/3] timeout - dma=0xb82b4000
argy@argy-desktop:~$
Γνώσεις → Linux: Χαμηλό │ Προγραμματισμός: Όχι │ Αγγλικά: Πολύ καλά
Λειτουργικό: dual boot:ubuntu 12.04 lts 64bit/ windows7 64 bit ultimate
Προδιαγραφές ⇛ Intel Core 2 quad Q9300 │ RAM 4000 MiB │ NVIDIA GeForce 9800 GT 512│ Μητρική: Gigabyte GA-73PVM-S2
Άβαταρ μέλους
argy1
punkTUX
punkTUX
 
Δημοσιεύσεις: 183
Εγγραφή: 14 Ιουν 2011, 13:57
Εκτύπωση

Re: Βοήθεια με tv tuner

Δημοσίευσηαπό simosx » 25 Απρ 2012, 17:52

argy1 έγραψε:
Ψιλο-δουλευει,δηλαδη πιανει 2-3 καναλια και αυτα μαυροασπρα και χωρις ηχο,ειναι μια προοδος ομως.Η καρτα παντως ειναι συνδεμενη στην κεραια και εψαξα λιγο τις ρυθμισεις αλλα δεν αλλαζει κατι.Επισης το dmesg


Πολύ ωραία. Αν δείχνει μόνο ασπρόμαυρο, δες στις ρυθμίσεις στο tvtime να αλλάξεις από NTSC σε PAL (η Ελλάδα χρησιμοποιεί PAL). Κανονικά πρέπει να πιάσει τα κανάλια σε ποιότητα που βλέπεις και με την τηλεόραση.

Για τον ήχο θέλει ειδική διαδικασία όπου ο ήχος από τον tuner στέλνεται στην κάρτα ήχου. Είχαμε ήδη πρόσφατα δύο συζητήσεις για το θέμα αυτό. Δες στο φόρουμ για περισσότερα.

Από το dmesg φαίνεται ότι πράγματι λειτουργεί. Για να έχουμε πλήρη εικόνα, πρέπει να
Κώδικας: Επιλογή όλων
dmesg > dmest.txt

και μετά να ανοίξεις το dmesg.txt από κάποιο κειμενογράφο και να επικολλήσεις εδώ όλο το κείμενο.
Η παραπάνω εντολή λέει να τοποθετηθεί η έξοδος της εντολής dmesg στο αρχείο dmesg.txt.
προσωπικό ιστολόγιο ϗ πλανήτης Ubuntu-gr
Συμβάλετε και εσείς στο ελληνικό βιβλίο Ubuntu!
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 13.10 saucy 3.11.0-031100rc1-generic 64bit (el_GR.UTF-8, Unity ubuntu)
3 AMD E-450 APU with Radeon HD Graphics ‖ RAM 3555 MiB ‖ Sony Corporation VAIO
4 AMD nee ATI Wrestler [Radeon HD 6320] [1002:9806] {fglrx_pci}
5 eth0: Atheros Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) ⋮ wlan0: Atheros Inc. AR9285 [168c:002b] (rev 01)
Φτιάξτε και εσείς τη δική σας υπογραφή (παραπάνω κείμενο) αυτόματα με κλικ εδώ!
simosx
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10334
Εγγραφή: 11 Μάιος 2008, 18:52
Launchpad: simosx
IRC: simosx
Εκτύπωση

Re: Βοήθεια με tv tuner

Δημοσίευσηαπό argy1 » 25 Απρ 2012, 22:28

gedit demst.txt Την σκεφτηκα μονος μου την ενολη αυτη :eh: :clap:
Κώδικας: Επιλογή όλων
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-41-generic (buildd@crested) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #88-Ubuntu SMP Thu Mar 29 13:10:32 UTC 2012 (Ubuntu 2.6.32-41.88-generic 2.6.32.59+drm33.24)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-41-generic root=UUID=36eff633-bf63-41f0-9677-fd8310185251 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e4000000 - 00000000e6000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] modified: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] modified: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] modified: 00000000e4000000 - 00000000e6000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfee0000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000
[ 0.000000] RAMDISK: 377f2000 - 37fef5e0
[ 0.000000] ACPI: RSDP 00000000000f6550 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee3180 05229 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000cfee1800 00040
[ 0.000000] ACPI: HPET 00000000cfee8500 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee8580 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000cfee8400 00098 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000cfee8ee0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000000000d000 - 0000000000011fff]
[ 0.000000] bootmap [0000000000012000 - 0000000000037fff] pages 26
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a37ac4] TEXT DATA BSS ==> [0001000000 - 0001a37ac4]
[ 0.000000] #3 [00377f2000 - 0037fef5e0] RAMDISK ==> [00377f2000 - 0037fef5e0]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001a38000 - 0001a380f6] BRK ==> [0001a38000 - 0001a380f6]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
[ 0.000000] found SMP MP-table at [ffff8800000f4c30] f4c30
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfee0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048186
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 104 pages reserved
[ 0.000000] DMA zone: 3834 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
[ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000e6000000
[ 0.000000] PM: Registered nosave memory: 00000000e6000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e6000000 (gap: e6000000:18c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91608 r8192 d23080 u524288
[ 0.000000] pcpu-alloc: s91608 r8192 d23080 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031058
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-41-generic root=UUID=36eff633-bf63-41f0-9677-fd8310185251 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 4048008k/4980736k available (5438k kernel code, 787992k absent, 144736k reserved, 2988k data, 884k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 41943040 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2500.002 MHz processor.
[ 0.010009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.00 BogoMIPS (lpj=25000020)
[ 0.010040] Security Framework initialized
[ 0.010067] AppArmor: AppArmor initialized
[ 0.010393] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013471] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014990] Mount-cache hash table entries: 256
[ 0.015182] Initializing cgroup subsys ns
[ 0.015189] Initializing cgroup subsys cpuacct
[ 0.015191] Initializing cgroup subsys memory
[ 0.015201] Initializing cgroup subsys devices
[ 0.015203] Initializing cgroup subsys freezer
[ 0.015204] Initializing cgroup subsys net_cls
[ 0.015230] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.015232] CPU: L2 cache: 3072K
[ 0.015235] CPU 0/0x0 -> Node 0
[ 0.015238] CPU: Physical Processor ID: 0
[ 0.015239] CPU: Processor Core ID: 0
[ 0.015243] mce: CPU supports 6 MCE banks
[ 0.015252] CPU0: Thermal monitoring enabled (TM2)
[ 0.015258] using mwait in idle threads.
[ 0.015259] Performance Events: Core2 events, Intel PMU driver.
[ 0.015266] ... version: 2
[ 0.015267] ... bit width: 40
[ 0.015268] ... generic registers: 2
[ 0.015270] ... value mask: 000000ffffffffff
[ 0.015271] ... max period: 000000007fffffff
[ 0.015273] ... fixed-purpose events: 3
[ 0.015274] ... event mask: 0000000700000003
[ 0.021070] ACPI: Core revision 20090903
[ 0.028411] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.028416] ftrace: allocating 22587 entries in 89 pages
[ 0.030064] Setting APIC routing to flat
[ 0.030452] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.136957] CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
[ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.020000] Initializing CPU#1
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 3072K
[ 0.020000] CPU 1/0x1 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 1
[ 0.020000] CPU1: Thermal monitoring enabled (TM2)
[ 0.290034] CPU1: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
[ 0.290041] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.300116] Booting processor 2 APIC 0x3 ip 0x6000
[ 0.020000] Initializing CPU#2
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 3072K
[ 0.020000] CPU 2/0x3 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 3
[ 0.020000] CPU2: Thermal monitoring enabled (TM2)
[ 0.460053] CPU2: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
[ 0.460060] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.470074] Booting processor 3 APIC 0x2 ip 0x6000
[ 0.020000] Initializing CPU#3
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 3072K
[ 0.020000] CPU 3/0x2 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 2
[ 0.020000] CPU3: Thermal monitoring enabled (TM2)
[ 0.630027] CPU3: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
[ 0.630035] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.640013] Brought up 4 CPUs
[ 0.640015] Total of 4 processors activated (20000.01 BogoMIPS).
[ 0.641866] CPU0 attaching sched-domain:
[ 0.641870] domain 0: span 0-1 level MC
[ 0.641872] groups: 0 1
[ 0.641875] domain 1: span 0-3 level CPU
[ 0.641877] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.641883] CPU1 attaching sched-domain:
[ 0.641885] domain 0: span 0-1 level MC
[ 0.641887] groups: 1 0
[ 0.641889] domain 1: span 0-3 level CPU
[ 0.641891] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.641896] CPU2 attaching sched-domain:
[ 0.641898] domain 0: span 2-3 level MC
[ 0.641899] groups: 2 3
[ 0.641902] domain 1: span 0-3 level CPU
[ 0.641904] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.641909] CPU3 attaching sched-domain:
[ 0.641910] domain 0: span 2-3 level MC
[ 0.641912] groups: 3 2
[ 0.641915] domain 1: span 0-3 level CPU
[ 0.641916] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.642031] devtmpfs: initialized
[ 0.642031] regulator: core version 0.5
[ 0.642031] Time: 21:35:34 Date: 04/25/12
[ 0.642031] NET: Registered protocol family 16
[ 0.642031] ACPI: bus type pci registered
[ 0.642031] Trying to unpack rootfs image as initramfs...
[ 0.642031] PCI: MCFG configuration 0: base e4000000 segment 0 buses 0 - 31
[ 0.642031] PCI: MCFG area at e4000000 reserved in E820
[ 0.642031] PCI: Using MMCONFIG at e4000000 - e5ffffff
[ 0.642031] PCI: Using configuration type 1 for base access
[ 0.642031] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.642031] mtrr: probably your BIOS does not setup all CPUs.
[ 0.642031] mtrr: corrected configuration.
[ 0.642031] bio: create slab <bio-0> at 0
[ 0.642031] ACPI: EC: Look up EC in DSDT
[ 0.650360] ACPI: Interpreter enabled
[ 0.650363] ACPI: (supports S0 S3 S4 S5)
[ 0.650381] ACPI: Using IOAPIC for interrupt routing
[ 0.657177] ACPI: No dock devices found.
[ 0.657257] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.658281] pci 0000:00:03.1: reg 10 io port: [0xc800-0xc83f]
[ 0.658293] pci 0000:00:03.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.658297] pci 0000:00:03.1: reg 24 io port: [0x1c80-0x1cbf]
[ 0.658326] pci 0000:00:03.1: PME# supported from D3hot D3cold
[ 0.658331] pci 0000:00:03.1: PME# disabled
[ 0.658486] pci 0000:00:04.0: reg 10 32bit mmio: [0xe7007000-0xe7007fff]
[ 0.658517] pci 0000:00:04.0: supports D1 D2
[ 0.658519] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.658522] pci 0000:00:04.0: PME# disabled
[ 0.658546] pci 0000:00:04.1: reg 10 32bit mmio: [0xe7006000-0xe70060ff]
[ 0.658585] pci 0000:00:04.1: supports D1 D2
[ 0.658587] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.658590] pci 0000:00:04.1: PME# disabled
[ 0.658631] pci 0000:00:08.0: reg 20 io port: [0xf000-0xf00f]
[ 0.658677] pci 0000:00:09.0: reg 10 32bit mmio: [0xe7000000-0xe7003fff]
[ 0.658717] pci 0000:00:09.0: PME# supported from D3hot D3cold
[ 0.658719] pci 0000:00:09.0: PME# disabled
[ 0.658799] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.658801] pci 0000:00:0b.0: PME# disabled
[ 0.658827] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.658830] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.658834] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977]
[ 0.658837] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73]
[ 0.658841] pci 0000:00:0e.0: reg 20 io port: [0xdc00-0xdc0f]
[ 0.658845] pci 0000:00:0e.0: reg 24 32bit mmio: [0xe7004000-0xe7005fff]
[ 0.658891] pci 0000:00:0f.0: reg 10 32bit mmio: [0xe7008000-0xe7008fff]
[ 0.658894] pci 0000:00:0f.0: reg 14 io port: [0xe000-0xe007]
[ 0.658898] pci 0000:00:0f.0: reg 18 32bit mmio: [0xe7009000-0xe70090ff]
[ 0.658902] pci 0000:00:0f.0: reg 1c 32bit mmio: [0xe700a000-0xe700a00f]
[ 0.658935] pci 0000:00:0f.0: supports D1 D2
[ 0.658937] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.658941] pci 0000:00:0f.0: PME# disabled
[ 0.659002] pci 0000:01:06.0: reg 10 32bit mmio: [0xe6000000-0xe6ffffff]
[ 0.659088] pci 0000:00:0a.0: transparent bridge
[ 0.659092] pci 0000:00:0a.0: bridge 32bit mmio: [0xe6000000-0xe6ffffff]
[ 0.659118] pci 0000:02:00.0: reg 10 32bit mmio: [0xe2000000-0xe2ffffff]
[ 0.659128] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.659136] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe0000000-0xe1ffffff]
[ 0.659141] pci 0000:02:00.0: reg 24 io port: [0xb000-0xb07f]
[ 0.659145] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.659217] pci 0000:00:0b.0: bridge io port: [0xb000-0xbfff]
[ 0.659219] pci 0000:00:0b.0: bridge 32bit mmio: [0xe0000000-0xe3ffffff]
[ 0.659223] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.659232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.659312] ACPI Warning for \_SB_.PCI0._PRT: Return Package type mismatch at index 2 - found [NULL Object Descriptor], expected Integer/Reference (20090903/nspredef-1012)
[ 0.659382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.700177] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.700290] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[ 0.700402] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.700512] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.700623] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.700734] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[ 0.700847] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.700956] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.701068] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.701178] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.701289] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.701399] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 0.701516] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0
[ 0.701626] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0
[ 0.701740] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.701851] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.701962] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.702072] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 0.702186] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.702296] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.702442] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.702580] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.702717] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.702855] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.702993] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.703136] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.703273] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.703412] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.703551] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
[ 0.703689] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
[ 0.703829] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
[ 0.703973] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
[ 0.704111] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
[ 0.704249] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.704387] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.704527] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.704667] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.704806] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.704946] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.705089] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.705191] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.705193] vgaarb: loaded
[ 0.705282] SCSI subsystem initialized
[ 0.705290] libata version 3.00 loaded.
[ 0.705290] usbcore: registered new interface driver usbfs
[ 0.705290] usbcore: registered new interface driver hub
[ 0.705363] usbcore: registered new device driver usb
[ 0.705363] ACPI: WMI: Mapper loaded
[ 0.705363] PCI: Using ACPI for IRQ routing
[ 0.705363] NetLabel: Initializing
[ 0.705363] NetLabel: domain hash size = 128
[ 0.705363] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.705363] NetLabel: unlabeled traffic allowed by default
[ 0.705363] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.705363] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.705363] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.720140] Switching to clocksource tsc
[ 0.722077] AppArmor: AppArmor Filesystem Enabled
[ 0.722106] pnp: PnP ACPI init
[ 0.722133] ACPI: bus type pnp registered
[ 0.725693] pnp: PnP ACPI: found 13 devices
[ 0.725696] ACPI: ACPI bus type pnp unregistered
[ 0.725708] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.725711] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.725713] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.725715] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.725717] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.725720] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.725723] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.725725] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
[ 0.725731] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.725733] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.725735] system 00:02: ioport range 0x295-0x314 has been reserved
[ 0.725737] system 00:02: ioport range 0x290-0x294 has been reserved
[ 0.725739] system 00:02: ioport range 0x880-0x88f has been reserved
[ 0.725746] system 00:0b: iomem range 0xe4000000-0xe5ffffff has been reserved
[ 0.725752] system 00:0c: iomem range 0xcd400-0xcffff has been reserved
[ 0.725754] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.725756] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.725759] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.725762] system 00:0c: iomem range 0xcfee0000-0xcfefffff could not be reserved
[ 0.725764] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.725766] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.725769] system 00:0c: iomem range 0x100000-0xcfedffff could not be reserved
[ 0.725771] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.725773] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.725775] system 00:0c: iomem range 0xfeff0000-0xfeff03ff has been reserved
[ 0.730505] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[ 0.730507] pci 0000:00:0a.0: IO window: disabled
[ 0.730511] pci 0000:00:0a.0: MEM window: 0xe6000000-0xe6ffffff
[ 0.730513] pci 0000:00:0a.0: PREFETCH window: disabled
[ 0.730521] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.730523] pci 0000:00:0b.0: IO window: 0xb000-0xbfff
[ 0.730526] pci 0000:00:0b.0: MEM window: 0xe0000000-0xe3ffffff
[ 0.730529] pci 0000:00:0b.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.730539] pci 0000:00:0a.0: setting latency timer to 64
[ 0.730545] pci 0000:00:0b.0: setting latency timer to 64
[ 0.730548] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.730550] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.730552] pci_bus 0000:01: resource 1 mem: [0xe6000000-0xe6ffffff]
[ 0.730554] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.730556] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.730558] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.730560] pci_bus 0000:02: resource 1 mem: [0xe0000000-0xe3ffffff]
[ 0.730562] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.730601] NET: Registered protocol family 2
[ 0.730766] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.731888] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.738577] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.739474] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.739477] TCP reno registered
[ 0.739707] NET: Registered protocol family 1
[ 0.740096] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
[ 0.740103] alloc irq_desc for 23 on node -1
[ 0.740105] alloc kstat_irqs on node -1
[ 0.740116] pci 0000:00:04.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 0.804577] Freeing initrd memory: 8181k freed
[ 0.819701] pci 0000:00:04.0: PCI INT A disabled
[ 0.820035] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[ 0.820042] alloc irq_desc for 22 on node -1
[ 0.820044] alloc kstat_irqs on node -1
[ 0.820055] pci 0000:00:04.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.839681] pci 0000:00:04.1: PCI INT B disabled
[ 0.839742] pci 0000:02:00.0: Boot video device
[ 0.840112] Scanning for low memory corruption every 60 seconds
[ 0.840273] audit: initializing netlink socket (disabled)
[ 0.840294] type=2000 audit(1335389733.839:1): initialized
[ 0.848503] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.849885] VFS: Disk quotas dquot_6.5.2
[ 0.849931] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.850463] fuse init (API version 7.13)
[ 0.850532] msgmni has been set to 7922
[ 0.850917] alg: No test for stdrng (krng)
[ 0.850959] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.850962] io scheduler noop registered
[ 0.850963] io scheduler anticipatory registered
[ 0.850965] io scheduler deadline registered
[ 0.851012] io scheduler cfq registered (default)
[ 0.851137] alloc irq_desc for 24 on node -1
[ 0.851139] alloc kstat_irqs on node -1
[ 0.851145] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
[ 0.851150] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.851198] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.851217] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.851325] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.851329] ACPI: Power Button [PWRB]
[ 0.851381] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.851383] ACPI: Power Button [PWRF]
[ 0.851828] ACPI: SSDT 00000000cfee8600 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.852018] processor LNXCPU:00: registered as cooling_device0
[ 0.852177] ACPI: SSDT 00000000cfee8ac0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.852355] processor LNXCPU:01: registered as cooling_device1
[ 0.852510] ACPI: SSDT 00000000cfee8c20 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.852688] processor LNXCPU:02: registered as cooling_device2
[ 0.852852] ACPI: SSDT 00000000cfee8d80 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.853032] processor LNXCPU:03: registered as cooling_device3
[ 0.856946] Linux agpgart interface v0.103
[ 0.856975] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.857063] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.857352] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.858194] brd: module loaded
[ 0.858586] loop: module loaded
[ 0.858656] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.858772] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 0.859008] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 0.859011] alloc irq_desc for 21 on node -1
[ 0.859012] alloc kstat_irqs on node -1
[ 0.859017] pata_acpi 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
[ 0.859030] pata_acpi 0000:00:0e.0: setting latency timer to 64
[ 0.859035] pata_acpi 0000:00:0e.0: PCI INT A disabled
[ 0.859267] Fixed MDIO Bus: probed
[ 0.859294] PPP generic driver version 2.4.2
[ 0.859319] tun: Universal TUN/TAP device driver, 1.6
[ 0.859320] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.859381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.859394] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.859412] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.859418] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.859447] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.859470] ehci_hcd 0000:00:04.1: debug port 1
[ 0.859477] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 0.859494] ehci_hcd 0000:00:04.1: irq 22, io mem 0xe7006000
[ 0.869677] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.869771] usb usb1: configuration #1 chosen from 1 choice
[ 0.869796] hub 1-0:1.0: USB hub found
[ 0.869802] hub 1-0:1.0: 10 ports detected
[ 0.869849] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.869860] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 0.869868] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.869871] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.869896] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[ 0.869913] ohci_hcd 0000:00:04.0: irq 23, io mem 0xe7007000
[ 0.931728] usb usb2: configuration #1 chosen from 1 choice
[ 0.931750] hub 2-0:1.0: USB hub found
[ 0.931756] hub 2-0:1.0: 10 ports detected
[ 0.931796] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.931852] PNP: No PS/2 controller found. Probing ports directly.
[ 0.932272] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.932278] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.932390] mice: PS/2 mouse device common for all mice
[ 0.932486] rtc_cmos 00:05: RTC can wake from S4
[ 0.932519] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.932550] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.932676] device-mapper: uevent: version 1.0.3
[ 0.932786] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.933030] device-mapper: multipath: version 1.1.0 loaded
[ 0.933038] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.933504] cpuidle: using governor ladder
[ 0.933506] cpuidle: using governor menu
[ 0.933779] TCP cubic registered
[ 0.933900] NET: Registered protocol family 10
[ 0.934465] NET: Registered protocol family 17
[ 0.935202] PM: Resume from disk failed.
[ 0.935212] registered taskstats version 1
[ 0.935467] Magic number: 8:125:602
[ 0.935514] pci_link PNP0C0F:0e: hash matches
[ 0.935559] rtc_cmos 00:05: setting system clock to 2012-04-25 21:35:34 UTC (1335389734)
[ 0.935567] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.935569] EDD information not available.
[ 0.935621] Freeing unused kernel memory: 884k freed
[ 0.935838] Write protecting the kernel read-only data: 7720k
[ 0.949337] udev: starting version 151
[ 0.971637] pata_amd 0000:00:08.0: version 0.4.1
[ 0.971682] pata_amd 0000:00:08.0: setting latency timer to 64
[ 0.977212] scsi0 : pata_amd
[ 0.978503] scsi1 : pata_amd
[ 0.979178] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.979181] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.979345] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.979822] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[ 0.979829] alloc irq_desc for 20 on node -1
[ 0.979831] alloc kstat_irqs on node -1
[ 0.979840] forcedeth 0000:00:0f.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20
[ 0.979845] forcedeth 0000:00:0f.0: setting latency timer to 64
[ 0.997644] Floppy drive(s): fd0 is 1.44M
[ 1.013601] FDC 0 is a post-1991 82077
[ 1.150283] ata1.00: ATAPI: SONY DVD RW DRU-190A, 1.65, max UDMA/66
[ 1.150300] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
[ 1.190233] ata1.00: configured for UDMA/66
[ 1.192453] scsi 0:0:0:0: CD-ROM SONY DVD RW DRU-190A 1.65 PQ: 0 ANSI: 5
[ 1.198260] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.198263] Uniform CD-ROM driver Revision: 3.20
[ 1.198344] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.198409] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.198482] ata2: port disabled. ignoring.
[ 1.511064] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:d0:5f:3c:6c
[ 1.511067] forcedeth 0000:00:0f.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.511090] ahci 0000:00:0e.0: version 3.0
[ 1.511107] ahci 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
[ 1.511177] alloc irq_desc for 25 on node -1
[ 1.511179] alloc kstat_irqs on node -1
[ 1.511188] ahci 0000:00:0e.0: irq 25 for MSI/MSI-X
[ 1.511194] ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ
[ 1.511239] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 1.511241] ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pmp pio
[ 1.511246] ahci 0000:00:0e.0: setting latency timer to 64
[ 1.511580] scsi2 : ahci
[ 1.511689] scsi3 : ahci
[ 1.511776] scsi4 : ahci
[ 1.511865] scsi5 : ahci
[ 1.511987] ata3: SATA max UDMA/133 abar m8192@0xe7004000 port 0xe7004100 irq 25
[ 1.511989] ata4: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 25
[ 1.511991] ata5: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 25
[ 1.511993] ata6: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed
[ 1.660009] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 1.860010] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.897762] usb 2-1: configuration #1 chosen from 1 choice
[ 1.908288] usbcore: registered new interface driver hiddev
[ 1.914931] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input3
[ 1.915001] generic-usb 0003:1532:010B.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer Arctosa] on usb-0000:00:04.0-1/input0
[ 1.925758] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.1/input/input4
[ 1.925819] generic-usb 0003:1532:010B.0002: input,hidraw1: USB HID v1.11 Device [Razer Razer Arctosa] on usb-0000:00:04.0-1/input1
[ 1.925836] usbcore: registered new interface driver usbhid
[ 1.925839] usbhid: v2.6:USB HID core driver
[ 2.250008] usb 2-2: new full speed USB device using ohci_hcd and address 3
[ 2.440012] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.440015] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.440027] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.440988] ata5.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[ 2.440991] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.442759] ata5.00: configured for UDMA/133
[ 2.449505] ata6.00: ATA-8: WDC WD6400AAVS-00G9B1, 05.04C05, max UDMA/133
[ 2.449507] ata6.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.450320] ata6.00: configured for UDMA/133
[ 2.452596] ata4.00: HPA unlocked: 625140335 -> 625142448, native 625142448
[ 2.452600] ata4.00: ATA-7: SAMSUNG HD322HJ, 1AC01112, max UDMA7
[ 2.452603] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.458958] ata4.00: configured for UDMA/133
[ 2.459056] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5
[ 2.459187] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.459212] sd 3:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.459273] sd 3:0:0:0: [sda] Write Protect is off
[ 2.459275] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.459295] scsi 4:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
[ 2.459303] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.459422] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.459478] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.459488] sda:
[ 2.459516] scsi 5:0:0:0: Direct-Access ATA WDC WD6400AAVS-0 05.0 PQ: 0 ANSI: 5
[ 2.459534] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.459537] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.459617] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 2.459632] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.459672] sd 5:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 2.459711] sd 5:0:0:0: [sdc] Write Protect is off
[ 2.459713] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.459736] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.459802] sdb:
[ 2.459876] sdc: sdc1
[ 2.466722] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 2.475083] sda1 sda2 sda3 sda4 < sda5
[ 2.485750] usb 2-2: configuration #1 chosen from 1 choice
[ 2.496957] input: Razer Razer Abyssus as /devices/pci0000:00/0000:00:04.0/usb2/2-2/2-2:1.0/input/input5
[ 2.497030] generic-usb 0003:1532:001C.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Abyssus] on usb-0000:00:04.0-2/input0
[ 2.506769] sda6 >
[ 2.507110] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.882741] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
[ 2.882746] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
[ 2.917499] [LDM] sdb1
[ 2.917854] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 3.345191] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 15.401241] udev: starting version 151
[ 15.417367] Adding 8217592k swap on /dev/sda6. Priority:-1 extents:1 across:8217592k
[ 15.433539] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 15.433560] i2c i2c-1: nForce2 SMBus adapter at 0x1c80
[ 15.435580] lp: driver loaded but no devices found
[ 15.517490] vga16fb: initializing
[ 15.517495] vga16fb: mapped to 0xffff8800000a0000
[ 15.517601] fb0: VGA16 VGA frame buffer device
[ 15.523858] Linux video capture interface: v2.00
[ 15.533597] type=1505 audit(1335378949.096:2): operation="profile_load" pid=622 name="/sbin/dhclient3"
[ 15.534183] type=1505 audit(1335378949.096:3): operation="profile_load" pid=622 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.534503] type=1505 audit(1335378949.096:4): operation="profile_load" pid=622 name="/usr/lib/connman/scripts/dhclient-script"
[ 15.537277] type=1505 audit(1335378949.096:5): operation="profile_replace" pid=657 name="/sbin/dhclient3"
[ 15.537909] type=1505 audit(1335378949.096:6): operation="profile_replace" pid=657 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.538260] type=1505 audit(1335378949.096:7): operation="profile_replace" pid=657 name="/usr/lib/connman/scripts/dhclient-script"
[ 15.578005] nvidia: module license 'NVIDIA' taints kernel.
[ 15.578015] Disabling lock debugging due to kernel taint
[ 15.757473] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 15.757482] alloc irq_desc for 16 on node -1
[ 15.757484] alloc kstat_irqs on node -1
[ 15.757494] nvidia 0000:02:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
[ 15.757503] nvidia 0000:02:00.0: setting latency timer to 64
[ 15.757510] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 15.757812] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012
[ 15.766141] parport_pc 00:0a: reported by Plug and Play ACPI
[ 15.766201] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 15.770465] ppdev: user-space parallel port driver
[ 15.771122] it87: Found IT8718F chip at 0x290, revision 5
[ 15.771136] it87: in3 is VCC (+5V)
[ 15.794861] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
[ 15.795212] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 15.795217] alloc irq_desc for 17 on node -1
[ 15.795218] alloc kstat_irqs on node -1
[ 15.795226] cx8800 0000:01:06.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 15.795668] cx88[0]: subsystem: 0000:0000, board: KWorld LTV883RF [card=16,insmod option], frontend(s): 0
[ 15.795670] cx88[0]: TV tuner type 48, Radio tuner type -1
[ 15.843747] HDA Intel 0000:00:09.0: power state changed by ACPI to D0
[ 15.843777] HDA Intel 0000:00:09.0: power state changed by ACPI to D0
[ 15.844018] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 15.844022] HDA Intel 0000:00:09.0: PCI INT A -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
[ 15.844025] hda_intel: Disable MSI for Nvidia chipset
[ 15.844062] HDA Intel 0000:00:09.0: setting latency timer to 64
[ 15.861417] lp0: using parport0 (interrupt-driven).
[ 15.934792] All bytes are equal. It is not a TEA5767
[ 15.934848] tuner 2-0060: chip found @ 0xc0 (cx88[0])
[ 15.937873] Console: switching to colour frame buffer device 80x30
[ 15.950849] tveeprom 2-0050: Huh, no eeprom present (err=-6)?
[ 15.990231] type=1505 audit(1335378949.546:8): operation="profile_load" pid=849 name="/usr/share/gdm/guest-session/Xsession"
[ 15.990416] type=1505 audit(1335378949.546:9): operation="profile_replace" pid=850 name="/sbin/dhclient3"
[ 15.991000] type=1505 audit(1335378949.546:10): operation="profile_replace" pid=850 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.991316] type=1505 audit(1335378949.546:11): operation="profile_replace" pid=850 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.047542] alloc irq_desc for 26 on node -1
[ 16.047545] alloc kstat_irqs on node -1
[ 16.047554] forcedeth 0000:00:0f.0: irq 26 for MSI/MSI-X
[ 16.111399] tuner-simple 2-0060: creating new instance
[ 16.111405] tuner-simple 2-0060: type set to 48 (Tenna TNF 8831 BGFF))
[ 16.112271] input: cx88 IR (KWorld LTV883RF) as /devices/pci0000:00/0000:00:0a.0/0000:01:06.0/input/input6
[ 16.112341] cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 17, latency: 32, mmio: 0xe6000000
[ 16.112357] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 16.112410] cx88[0]/0: registered device video0 [v4l2]
[ 16.112433] cx88[0]/0: registered device vbi0
[ 16.112456] cx88[0]/0: registered device radio0
[ 16.821604] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 16.821608] vboxdrv: Successfully done.
[ 16.821610] vboxdrv: Found 4 processor cores.
[ 16.821773] VBoxDrv: dbg - g_abExecMemory=ffffffffa0e3ba20
[ 16.821833] vboxdrv: fAsync=0 offMin=0x13b offMax=0x1dcc
[ 16.821981] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 16.821983] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001).
[ 17.461314] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.0/input/input7
[ 26.602508] eth0: no IPv6 routers present
Γνώσεις → Linux: Χαμηλό │ Προγραμματισμός: Όχι │ Αγγλικά: Πολύ καλά
Λειτουργικό: dual boot:ubuntu 12.04 lts 64bit/ windows7 64 bit ultimate
Προδιαγραφές ⇛ Intel Core 2 quad Q9300 │ RAM 4000 MiB │ NVIDIA GeForce 9800 GT 512│ Μητρική: Gigabyte GA-73PVM-S2
Άβαταρ μέλους
argy1
punkTUX
punkTUX
 
Δημοσιεύσεις: 183
Εγγραφή: 14 Ιουν 2011, 13:57
Εκτύπωση

Re: Βοήθεια με tv tuner

Δημοσίευσηαπό Learner » 25 Απρ 2012, 22:38

simosx έγραψε:@Learner: μάλλον είναι προβληματική η διαδικασία για δοκιμή άλλων tuner από γραμμή εντολής.
Ίσως είναι πιο εύκολο να γίνεται κάθε φορά ρύθμιση στο /etc/modprobe.d/ και να χρειάζεται επανεκκίνηση.

Πιο εύκολο δεν είναι , από την άποψη να κάνεις συνέχεια επανεκκινήσεις , αλλά απ' ότι φάνηκε είναι πιο αποτελεσματικό . Μιας και ξέραμε το μοντέλο της κάρτας (card=16).
Σωστός Σίμος . :clap:
argy1 έγραψε:
Κώδικας: Επιλογή όλων

[ 15.795226] cx8800 0000:01:06.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 15.795668] cx88[0]: subsystem: 0000:0000, board: KWorld LTV883RF [card=16,insmod option], frontend(s): 0
[ 15.795670] cx88[0]: TV tuner type 48, Radio tuner type -1
[ 16.111399] tuner-simple 2-0060: creating new instance
[ 16.111405] tuner-simple 2-0060: type set to 48 (Tenna TNF 8831 BGFF))
[ 16.112271] input: cx88 IR (KWorld LTV883RF) as /devices/pci0000:00/0000:00:0a.0/0000:01:06.0/input/input6
[ 16.112341] cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 17, latency: 32, mmio: 0xe6000000
[ 16.112357] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 16.112410] cx88[0]/0: registered device video0 [v4l2]
[ 16.112433] cx88[0]/0: registered device vbi0
[ 16.112456] cx88[0]/0: registered device radio0

:thumbup:
▶ About Me
◉ NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9766
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: Βοήθεια με tv tuner

Δημοσίευσηαπό argy1 » 25 Απρ 2012, 22:46

Λοιπον οσο για τον ηχο δοκιμασα
Κώδικας: Επιλογή όλων
sox --buffer 16000 -q -c 2 -s -r 32000 -t alsa hw:1 -t alsa hw:0 & tvtime && killall sox

Ανοιξε το tvtime αλλα χωρις ηχο παλι.Εγκατεστησα και το sox.Eβαλα εικονα PAL και ηχο PAL-DK.
Τι αλλο πρεπει να κανω? Εψαξα στο φορουμ για παρομοια προβληματα ηχου αλλα εχουν διαφορετικες καρτες οποτε ειναι και διαφορετικες οι εντολες.
Γνώσεις → Linux: Χαμηλό │ Προγραμματισμός: Όχι │ Αγγλικά: Πολύ καλά
Λειτουργικό: dual boot:ubuntu 12.04 lts 64bit/ windows7 64 bit ultimate
Προδιαγραφές ⇛ Intel Core 2 quad Q9300 │ RAM 4000 MiB │ NVIDIA GeForce 9800 GT 512│ Μητρική: Gigabyte GA-73PVM-S2
Άβαταρ μέλους
argy1
punkTUX
punkTUX
 
Δημοσιεύσεις: 183
Εγγραφή: 14 Ιουν 2011, 13:57
Εκτύπωση

Re: Βοήθεια με tv tuner

Δημοσίευσηαπό simosx » 25 Απρ 2012, 23:27

argy1 έγραψε:Λοιπον οσο για τον ηχο δοκιμασα
Κώδικας: Επιλογή όλων
sox --buffer 16000 -q -c 2 -s -r 32000 -t alsa hw:1 -t alsa hw:0 & tvtime && killall sox

Ανοιξε το tvtime αλλα χωρις ηχο παλι.Εγκατεστησα και το sox.Eβαλα εικονα PAL και ηχο PAL-DK.
Τι αλλο πρεπει να κανω? Εψαξα στο φορουμ για παρομοια προβληματα ηχου αλλα εχουν διαφορετικες καρτες οποτε ειναι και διαφορετικες οι εντολες.


Πράγματι, ο ένας τρόπος είναι με χρήση του sox. Ο άλλος τρόπος είμαι με χρήση του PulseAudio. Δεν έχω ούτε αυτόν το σύνδεσμο πρόχειρο.
Μπορείς να ψάξεις για το πως επιλύσεις το πρόβλημα μέσω PulseAudio;
προσωπικό ιστολόγιο ϗ πλανήτης Ubuntu-gr
Συμβάλετε και εσείς στο ελληνικό βιβλίο Ubuntu!
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 13.10 saucy 3.11.0-031100rc1-generic 64bit (el_GR.UTF-8, Unity ubuntu)
3 AMD E-450 APU with Radeon HD Graphics ‖ RAM 3555 MiB ‖ Sony Corporation VAIO
4 AMD nee ATI Wrestler [Radeon HD 6320] [1002:9806] {fglrx_pci}
5 eth0: Atheros Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) ⋮ wlan0: Atheros Inc. AR9285 [168c:002b] (rev 01)
Φτιάξτε και εσείς τη δική σας υπογραφή (παραπάνω κείμενο) αυτόματα με κλικ εδώ!
simosx
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10334
Εγγραφή: 11 Μάιος 2008, 18:52
Launchpad: simosx
IRC: simosx
Εκτύπωση

Re: Βοήθεια με tv tuner

Δημοσίευσηαπό argy1 » 26 Απρ 2012, 11:13

Δεν το πιστευω αυτο που εγινε!Σημερα παλι δεν πιανει κανενα καναλι και χαθηκε η επιλογη channel managment.Το μονο που εκανα ειναι ψαχνοντας πληροφοριες για το pulse audio να παρω πληροφοριες για την καρτα ηχου
Κώδικας: Επιλογή όλων
http://www.alsa-project.org/db/?f=33f1d68398ee5f34df064fa1b13c395e5ddd1ed1
Λετε να φταιει αυτο ή εκανα καμια βλακεια με τις εντολες? Παντως το tuner.conf,που ηταν και αυτο που το εκανε να παιξει, το ανοιξα και εχει μεσα την παραμετρο options cx88xx card=16.
Γνώσεις → Linux: Χαμηλό │ Προγραμματισμός: Όχι │ Αγγλικά: Πολύ καλά
Λειτουργικό: dual boot:ubuntu 12.04 lts 64bit/ windows7 64 bit ultimate
Προδιαγραφές ⇛ Intel Core 2 quad Q9300 │ RAM 4000 MiB │ NVIDIA GeForce 9800 GT 512│ Μητρική: Gigabyte GA-73PVM-S2
Άβαταρ μέλους
argy1
punkTUX
punkTUX
 
Δημοσιεύσεις: 183
Εγγραφή: 14 Ιουν 2011, 13:57
Εκτύπωση

ΠροηγούμενηΕπόμενο

Επιστροφή στο Κάρτες Γραφικών / Εικόνα / TV

cron