Χάθηκε το ασύρματο μετά από αναβάθμιση πυρήνα.

[Learner]

Υπάρχει και μια περίπτωση να φταίει το hp_wmi , οπότε κάνε το ένα blacklist

Κώδικας: Επιλογή όλων

echo 'blacklist hp_wmi' | sudo tee -a /etc/modprobe.d/blacklist.conf

και κάνε μια επανεκκίνηση να δεις.
Αν δεν κάνει κάτι , τότε το επαναφέρεις , διαγράφοντας την γραμμή από το /etc/modprobe.d/blacklist.conf

[sotos21]

Όχι δυστυχώς δεν έγινε τίποτα ακόμα.

[Learner]

Ακολούθα αυτό το σενάριο , να δούμε αν δουλέψει.

Πρώτα κάνεις blacklist κάποια modules .

Κώδικας: Επιλογή όλων

sudo -i
echo "blacklist bcma" >> /etc/modprobe.d/blacklist.conf
echo "blacklist b43" >> /etc/modprobe.d/blacklist.conf
echo "blacklist brcmsmac " >> /etc/modprobe.d/blacklist.conf
exit

Μετά απεγκαθιστάς τα παρακάτω (αν είναι εγκατεστημένα)

Κώδικας: Επιλογή όλων

sudo apt-get purge bcmwl-kernel-source broadcom-sta-common broadcom-sta-source

Κάνεις μια επανεκκίνηση και μετά εγκαθιστάς πάλι τα ίδια πακέτα..

Κώδικας: Επιλογή όλων

sudo apt-get install bcmwl-kernel-source broadcom-sta-common broadcom-sta-source

[sotos21]

Τζίφος

Κώδικας: Επιλογή όλων

sotiris@sotiris-laptop:~$ sudo apt-get install bcmwl-kernel-source broadcom-sta-common broadcom-sta-source
[sudo] password for sotiris:
Ανάγνωση Λιστών Πακέτων... Ολοκληρώθηκε
Κατασκευή Δένδρου Εξαρτήσεων
Ανάγνωση περιγραφής της τρέχουσας κατάσταση... Ολοκληρώθηκε
Τα ακόλουθα επιπλέον πακέτα θα εγκατασταθούν:
diffstat quilt
Προτεινόμενα πακέτα:
procmail graphviz
Τα ακόλουθα ΝΕΑ πακέτα θα εγκατασταθούν:
bcmwl-kernel-source broadcom-sta-common broadcom-sta-source diffstat quilt
0 αναβαθμίστηκαν, 5 νέο εγκατεστημένα, 0 θα αφαιρεθούν και 0 δεν αναβαθμίζονται.
Χρειάζεται να μεταφορτωθούν 2410kB από αρχεία.
Μετά από αυτή τη λειτουργία, θα χρησιμοποιηθούν 5132kB χώρου από το δίσκο.
Θέλετε να συνεχίσετε [Ν/ο]; y
Φέρε:1 http://gr.archive.ubuntu.com/ubuntu/ lucid/restricted bcmwl-kernel-source 5.60.48.36+bdcom-0ubuntu3 [896kB]
Φέρε:2 http://gr.archive.ubuntu.com/ubuntu/ lucid/multiverse broadcom-sta-common 5.10.91.9.3-3 [8582B]
Φέρε:3 http://gr.archive.ubuntu.com/ubuntu/ lucid/main diffstat 1.47-1build1 [24,8kB]
Φέρε:4 http://gr.archive.ubuntu.com/ubuntu/ lucid/main quilt 0.48-5 [318kB]
Φέρε:5 http://gr.archive.ubuntu.com/ubuntu/ lucid/multiverse broadcom-sta-source 5.10.91.9.3-3 [1163kB]
Μεταφορτώθηκαν 2410kB σε 1s (1335kB/s)
Selecting previously unselected package bcmwl-kernel-source.
(Ανάγνωση βάσης δεδομένων ... 168207 files and directories currently installed.)
Γίνεται αποσυμπίεση bcmwl-kernel-source (από .../bcmwl-kernel-source_5.60.48.36+bdcom-0ubuntu3_amd64.deb) ...
Selecting previously unselected package broadcom-sta-common.
Γίνεται αποσυμπίεση broadcom-sta-common (από .../broadcom-sta-common_5.10.91.9.3-3_all.deb) ...
Selecting previously unselected package diffstat.
Γίνεται αποσυμπίεση diffstat (από .../diffstat_1.47-1build1_amd64.deb) ...
Selecting previously unselected package quilt.
Γίνεται αποσυμπίεση quilt (από .../archives/quilt_0.48-5_all.deb) ...
Selecting previously unselected package broadcom-sta-source.
Γίνεται αποσυμπίεση broadcom-sta-source (από .../broadcom-sta-source_5.10.91.9.3-3_all.deb) ...
Επεξεργασία των trigger για man-db ...
Επεξεργασία των trigger για doc-base ...
Processing 1 added doc-base file(s)...
Registering documents with scrollkeeper...
Γίνεται εγκατάσταση bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu3) ...
Loading new bcmwl-5.60.48.36+bdcom DKMS files...
First Installation: checking all kernels...
Building only for 3.4.0-030400rc1-generic
Building for architecture x86_64
Building initial module for 3.4.0-030400rc1-generic

Error! Bad return status for module build on kernel: 3.4.0-030400rc1-generic (x86_64)
Consult the make.log in the build directory
/var/lib/dkms/bcmwl/5.60.48.36+bdcom/build/ for more information.
dpkg: σφάλμα στην επεξεργασία του bcmwl-kernel-source (--configure):
η υποδιεργασία installed post-installation script επέστρεψε κατάσταση λάθους 10
Γίνεται εγκατάσταση broadcom-sta-common (5.10.91.9.3-3) ...
Γίνεται εγκατάσταση diffstat (1.47-1build1) ...
Γίνεται εγκατάσταση quilt (0.48-5) ...
Γίνεται εγκατάσταση broadcom-sta-source (5.10.91.9.3-3) ...
Προέκυψαν σφάλματα κατά την επεξεργασία του:
bcmwl-kernel-source
E: Sub-process /usr/bin/dpkg returned an error code (1)
sotiris@sotiris-laptop:~$


κάπου είχα διαβάσει ότι μιας και η διανομή 10.04 είναι παλιά και ο κώδικας για BCMWL που διαθέτει στα αποθετήρια είναι παλιός, αδυνατεί να μεταγλωττιστεί για νέους kernel που απαιτούν νέες εκδόσεις βιβλιοθηκών (libc6 >2.14).
Γιαυτό είπα από την αρχή "Κλειστούς δεν με αφήνει να εγκαταστήσω και ούτε θέλω."
Είναι σαν να σε φτύνει η γκόμενα και εσύ κολλημένος να προσπαθείς συνέχεια.(άλλο οι οδηγοί του πυρήνα, εκεί είναι στην θέση της γκόμενας η σύζυγος και εσύ προσπαθείς για να κρατήσεις το σπίτι σου.)

[Learner]

Τότε μάλλον έχεις δίκιο. Δεν ταιριάζουν οι εκδόσεις. Δηλαδή η έκδοση του πακέτου (bcmwl) της 10.04 είναι πιθανών για τον πυρήνα 2.6 και όχι για τον 3.4 .
Οπότε μια λύση που μπορείς να δοκιμάσεις είναι να βάλεις το LiveCD της 12.04 και να το θέσεις ως source list και από εκεί να προσπαθήσεις να εγκαταστήσεις το bcmwl . Στο Live της 12.04 θα υπάρχουν και τα dependencies λογικά.

[sotos21]

To βραδάκι Νίκο γιατί τώρα δεν μπορώ να είμαι κοντά στο rooter.

[modenas88]

Από που εγκατέστησες τον πυρήνα 3.4.0-1; Δώσε και σύνδεσμο.

Ναι δώσε από την 12.04 ενώ έχεις συνδεθεί με ασύρματο τα:

Κώδικας: Επιλογή όλων

lspci -nnk -d 14e4:
lsmod

Και από την 10.04 επιπλέον τα:

Κώδικας: Επιλογή όλων

iwconfig
iwlist wlan0 scan
dmesg

Υποψιάζομαι ότι επειδή οι ανοικτοί δεν δούλευαν καθόλου στο 10.04, μήπως είναι σε μαύρη λίστα;

Η μαύρη λίστα είναι στη διαδρομή «/etc/modprobe.d/». Μπορείς να ελέγξεις αν κάποιο Module που υποψιάζεσαι υπάρχει σε κάποιο από τα αρχεία. Για να το ελέγξεις ποιο γρήγορα κάνε το με την εντολή:

Κώδικας: Επιλογή όλων

grep -r <όνομα του module> /etc/modprobe.d/

Αν δεις κάποια εγγραφή για κάποιο από τα modules που αναφέρθηκαν εδώ, καλύτερα γράφτην να την δούμε.

Επίσης το b43 δεν υποστηρίζει τη συσκευή σου. Αλλά το brcmsmac.

Γενικά μην ελέγχεις αν υπάρχει «πρόοδος» τον Network manager, αλλά με:

Κώδικας: Επιλογή όλων

iwconfig
iwlist wlan0 scan

EDIT: Για δώσε και το αποτέλεσμα του:

Κώδικας: Επιλογή όλων

ls -l /lib/firmware/brcm

[sotos21]

Από που εγκατέστησες τον πυρήνα 3.4.0-1; Δώσε και σύνδεσμο.
http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.4-rc1-precise/

Ναι δώσε από την 12.04 ενώ έχεις συνδεθεί με ασύρματο τα:

Κώδικας: Επιλογή όλων

lspci -nnk -d 14e4:
lsmod

Κώδικας: Επιλογή όλων

sotiris@sotiris-HP-G62-Notebook-PC:~$ lspci -nnk -d 14e4:
04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:145c]
Kernel driver in use: bcma-pci-bridge
Kernel modules: bcma
sotiris@sotiris-HP-G62-Notebook-PC:~$

Κώδικας: Επιλογή όλων

sotiris@sotiris-HP-G62-Notebook-PC:~$ lsmod
Module Size Used by
bnep 18144 2
parport_pc 32688 0
rfcomm 42525 0
bluetooth 204998 10 bnep,rfcomm
ppdev 17030 0
binfmt_misc 17431 1
snd_hda_codec_hdmi 32062 1
snd_hda_codec_realtek 73281 1
arc4 12529 2
snd_hda_intel 33293 4
brcmsmac 546796 0
snd_hda_codec 127693 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13563 1 snd_hda_codec
mac80211 515873 1 brcmsmac
brcmutil 14755 1 brcmsmac
snd_pcm 96580 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
cfg80211 197774 2 brcmsmac,mac80211
crc8 12893 1 brcmsmac
cordic 12535 1 brcmsmac
snd_seq_midi 13324 0
snd_rawmidi 30238 1 snd_seq_midi
snd_seq_midi_event 14899 1 snd_seq_midi
hp_wmi 18048 0
sparse_keymap 13890 1 hp_wmi
snd_seq 61521 2 snd_seq_midi,snd_seq_midi_event
uvcvideo 72245 0
snd_timer 29532 2 snd_pcm,snd_seq
videobuf2_core 32760 1 uvcvideo
videodev 107124 1 uvcvideo
videobuf2_vmalloc 12860 1 uvcvideo
videobuf2_memops 13230 1 videobuf2_vmalloc
snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq
psmouse 86124 0
microcode 22803 0
serio_raw 13211 0
lp 17759 0
k10temp 13119 0
joydev 17457 0
bcma 31061 1 brcmsmac
parport 46354 3 parport_pc,ppdev,lp
snd 68728 18 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
mac_hid 13205 0
sp5100_tco 13697 0
i2c_piix4 13167 0
shpchp 37108 0
soundcore 12680 1 snd
snd_page_alloc 18484 2 snd_hda_intel,snd_pcm
usbhid 46870 0
hid 99749 1 usbhid
video 19096 0
radeon 87843 1 3
wmi 19070 1 hp_wmi
ttm 83471 1 radeon
drm_kms_helper 46801 1 radeon
drm 253810 5 radeon,ttm,drm_kms_helper
r8169 61037 0
i2c_algo_bit 13413 1 radeon
usb_storage 44681 7
sotiris@sotiris-HP-G62-Notebook-PC:~$

Αυτά από την 12.04 με τον 3.4.0-1 πυρήνα, περίμενε να αλλάξω σκληρό και να κάνω επεξεργασία σε αυτό το μήνυμα για τα υπόλοιπα.
Συνεχίζω
Και από την 10.04 επιπλέον τα:

Κώδικας: Επιλογή όλων

iwconfig
iwlist wlan0 scan
dmesg

Κώδικας: Επιλογή όλων

sotiris@sotiris-laptop:~$ iwconfig
teredo no wireless extensions.

eth0 no wireless extensions.

lo no wireless extensions.

sotiris@sotiris-laptop:~$

Κώδικας: Επιλογή όλων

sotiris@sotiris-laptop:~$ iwlist wlan0 scan
wlan0 Interface doesn't support scanning.

sotiris@sotiris-laptop:~$

Κώδικας: Επιλογή όλων

sotiris@sotiris-laptop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-030400rc1-generic (apw@gomeisa) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #201203312035 SMP Sun Apr 1 00:36:22 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.4.0-030400rc1-generic root=UUID=17236dbb-64a2-41b3-a7e5-e1dc460138b1 ro quiet splash iommu=noaperture cgroup_disable=memory
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000ce4e5000 (usable)
[ 0.000000] BIOS-e820: 00000000ce4e5000 - 00000000ce6e5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ce6e5000 - 00000000cfd3f000 (usable)
[ 0.000000] BIOS-e820: 00000000cfd3f000 - 00000000cfdbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000cfdbf000 - 00000000cfebf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfebf000 - 00000000cfef6000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef6000 - 00000000cff00000 (usable)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000f9000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP G62 Notebook PC /143C, BIOS F.2B 12/05/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000FFE00000 mask FFFFFFE00000 write-protect
[ 0.000000] 1 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 2 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 3 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 5 base 0000CFEBC000 mask FFFFFFFFF000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff00000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff00000 page 4k
[ 0.000000] kernel direct mapping tables up to cff00000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ cfefe000-cff00000
[ 0.000000] RAMDISK: 36dde000 - 376e7000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000cfef5120 0005C (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 00000000cfef4000 000F4 (v04 HPQOEM SLIC-MPC 00000003 103C 01000013)
[ 0.000000] ACPI: DSDT 00000000cfee5000 0B9EF (v01 HPQOEM SLIC-MPC F0000000 103C 01000013)
[ 0.000000] ACPI: FACS 00000000cfe9b000 00040
[ 0.000000] ACPI: HPET 00000000cfef3000 00038 (v01 HPQOEM SLIC-MPC 00000001 103C 01000013)
[ 0.000000] ACPI: APIC 00000000cfef2000 00084 (v02 HPQOEM SLIC-MPC 00000001 103C 01000013)
[ 0.000000] ACPI: MCFG 00000000cfef1000 0003C (v01 HPQOEM SLIC-MPC 00000001 103C 01000013)
[ 0.000000] ACPI: BOOT 00000000cfee4000 00028 (v01 HPQOEM SLIC-MPC 00000001 103C 01000013)
[ 0.000000] ACPI: SLIC 00000000cfee3000 00176 (v01 HPQOEM SLIC-MPC 00000001 103C 01000013)
[ 0.000000] ACPI: SSDT 00000000cfee2000 00386 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffc000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ba00000-ffff88011f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000ce4e5
[ 0.000000] 0: 0x000ce6e5 -> 0x000cfd3f
[ 0.000000] 0: 0x000cfef6 -> 0x000cff00
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 981720
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 830345 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 129024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000ce4e5000 - 00000000ce6e5000
[ 0.000000] PM: Registered nosave memory: 00000000cfd3f000 - 00000000cfdbf000
[ 0.000000] PM: Registered nosave memory: 00000000cfdbf000 - 00000000cfebf000
[ 0.000000] PM: Registered nosave memory: 00000000cfebf000 - 00000000cfef6000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000f9000000
[ 0.000000] PM: Registered nosave memory: 00000000f9000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:28100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s83072 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 963283
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.0-030400rc1-generic root=UUID=17236dbb-64a2-41b3-a7e5-e1dc460138b1 ro quiet splash iommu=noaperture cgroup_disable=memory
[ 0.000000] Disabling memory control group subsystem
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3773872k/4718592k available (6617k kernel code, 791712k absent, 153008k reserved, 6535k data, 916k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2194.563 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.12 BogoMIPS (lpj=8778252)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000029] Security Framework initialized
[ 0.000043] AppArmor: AppArmor initialized
[ 0.000369] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001858] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002542] Mount-cache hash table entries: 256
[ 0.002750] Initializing cgroup subsys cpuacct
[ 0.002752] Initializing cgroup subsys memory
[ 0.002761] Initializing cgroup subsys devices
[ 0.002764] Initializing cgroup subsys freezer
[ 0.002766] Initializing cgroup subsys blkio
[ 0.002773] Initializing cgroup subsys perf_event
[ 0.002797] tseg: 00cff00000
[ 0.002799] CPU: Physical Processor ID: 0
[ 0.002801] CPU: Processor Core ID: 0
[ 0.002803] mce: CPU supports 6 MCE banks
[ 0.002809] LVT offset 0 assigned for vector 0xf9
[ 0.002814] using AMD E400 aware idle routine
[ 0.004709] ACPI: Core revision 20120320
[ 0.017930] ftrace: allocating 25534 entries in 100 pages
[ 0.032663] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072298] CPU0: AMD Athlon(tm) II P340 Dual-Core Processor stepping 03
[ 0.179571] Performance Events: AMD PMU driver.
[ 0.179576] ... version: 0
[ 0.179578] ... bit width: 48
[ 0.179579] ... generic registers: 4
[ 0.179581] ... value mask: 0000ffffffffffff
[ 0.179582] ... max period: 00007fffffffffff
[ 0.179584] ... fixed-purpose events: 0
[ 0.179585] ... event mask: 000000000000000f
[ 0.179736] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.179838] Booting Node 0, Processors #1
[ 0.192969] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.192990] Brought up 2 CPUs
[ 0.192993] Total of 2 processors activated (8778.25 BogoMIPS).
[ 0.193009] System has AMD C1E enabled
[ 0.193023] Switch to broadcast mode on CPU1
[ 0.193454] Switch to broadcast mode on CPU0
[ 0.193672] devtmpfs: initialized
[ 0.197009] EVM: security.selinux
[ 0.197011] EVM: security.SMACK64
[ 0.197012] EVM: security.capability
[ 0.197130] PM: Registering ACPI NVS region [mem 0xce4e5000-0xce6e4fff] (2097152 bytes)
[ 0.197166] PM: Registering ACPI NVS region [mem 0xcfdbf000-0xcfebefff] (1048576 bytes)
[ 0.198053] dummy:
[ 0.198115] RTC time: 19:30:40, date: 07/15/12
[ 0.198157] NET: Registered protocol family 16
[ 0.198287] node 0 link 0: io port [0, ffffff]
[ 0.198290] TOM: 00000000d0000000 aka 3328M
[ 0.198293] Fam 10h mmconf [mem 0xf8000000-0xfbffffff]
[ 0.198296] node 0 link 0: mmio [a0000, bffff]
[ 0.198299] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.198301] node 0 link 0: mmio [e0000000, f21fffff]
[ 0.198304] node 0 link 0: mmio [f2200000, f23fffff]
[ 0.198306] node 0 link 0: mmio [f2400000, f7ffffff]
[ 0.198309] node 0 link 0: mmio [f8000000, fbffffff] ==> none
[ 0.198312] node 0 link 0: mmio [fc000000, ffdfffff]
[ 0.198314] TOM2: 0000000130000000 aka 4864M
[ 0.198316] bus: [00, 1f] on node 0 link 0
[ 0.198318] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.198320] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.198322] bus: 00 index 2 [mem 0xd0000000-0xf7ffffff]
[ 0.198324] bus: 00 index 3 [mem 0xfc000000-0xffffffff]
[ 0.198326] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
[ 0.198381] ACPI: bus type pci registered
[ 0.198453] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.198457] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.198460] PCI: MMCONFIG for 0000 [bus00-0f] at [mem 0xf8000000-0xf8ffffff] (base 0xf8000000) (size reduced!)
[ 0.200382] PCI: Using configuration type 1 for base access
[ 0.201410] bio: create slab <bio-0> at 0
[ 0.201521] ACPI: Added _OSI(Module Device)
[ 0.201523] ACPI: Added _OSI(Processor Device)
[ 0.201524] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.201526] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.202926] ACPI: EC: Look up EC in DSDT
[ 0.204385] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.207229] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.245834] ACPI: Interpreter enabled
[ 0.245842] ACPI: (supports S0 S3 S4 S5)
[ 0.245869] ACPI: Using IOAPIC for interrupt routing
[ 0.254839] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.255030] ACPI: No dock devices found.
[ 0.255035] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.255421] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.256083] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.256086] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.256088] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.256091] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.256093] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.256095] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.256098] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.256100] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.256102] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.256105] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.256107] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.256109] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.256112] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.256114] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.256116] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.256119] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xf7ffffff]
[ 0.256121] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed3ffff]
[ 0.256124] pci_root PNP0A08:00: host bridge window [mem 0xfed45000-0xffffffff]
[ 0.256131] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[ 0.256165] PCI host bridge to bus 0000:00
[ 0.256167] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.256170] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.256172] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.256175] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.256177] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.256179] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.256182] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.256184] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.256187] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.256189] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.256191] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.256195] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.256198] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.256200] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.256203] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[ 0.256205] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[ 0.256207] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[ 0.256221] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.256277] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
[ 0.256320] pci 0000:00:03.0: [1022:960b] type 01 class 0x060400
[ 0.256358] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.256375] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
[ 0.256411] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.256431] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[ 0.256468] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.256504] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.256525] pci 0000:00:11.0: reg 10: [io 0x9038-0x903f]
[ 0.256535] pci 0000:00:11.0: reg 14: [io 0x904c-0x904f]
[ 0.256544] pci 0000:00:11.0: reg 18: [io 0x9030-0x9037]
[ 0.256554] pci 0000:00:11.0: reg 1c: [io 0x9048-0x904b]
[ 0.256563] pci 0000:00:11.0: reg 20: [io 0x9010-0x901f]
[ 0.256573] pci 0000:00:11.0: reg 24: [mem 0xf2406000-0xf24063ff]
[ 0.256640] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.256654] pci 0000:00:12.0: reg 10: [mem 0xf2405000-0xf2405fff]
[ 0.256724] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.257207] pci 0000:00:12.2: reg 10: [mem 0xf2406500-0xf24065ff]
[ 0.259765] pci 0000:00:12.2: supports D1 D2
[ 0.259770] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.259803] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.259880] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.259902] pci 0000:00:14.2: reg 10: [mem 0xf2400000-0xf2403fff 64bit]
[ 0.259966] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.259982] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.260055] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.260101] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.260114] pci 0000:00:16.0: reg 10: [mem 0xf2404000-0xf2404fff]
[ 0.260183] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.260636] pci 0000:00:16.2: reg 10: [mem 0xf2406400-0xf24064ff]
[ 0.263204] pci 0000:00:16.2: supports D1 D2
[ 0.263209] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.263239] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.263267] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.263281] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.263296] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.263314] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.263364] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
[ 0.263374] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.263379] pci 0000:01:05.0: reg 14: [io 0x8000-0x80ff]
[ 0.263384] pci 0000:01:05.0: reg 18: [mem 0xf2300000-0xf230ffff]
[ 0.263395] pci 0000:01:05.0: reg 24: [mem 0xf2200000-0xf22fffff]
[ 0.263414] pci 0000:01:05.0: supports D1 D2
[ 0.263424] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
[ 0.263433] pci 0000:01:05.1: reg 10: [mem 0xf2310000-0xf2313fff]
[ 0.263466] pci 0000:01:05.1: supports D1 D2
[ 0.263505] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.263509] pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
[ 0.263513] pci 0000:00:01.0: bridge window [mem 0xf2200000-0xf23fffff]
[ 0.263517] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.263551] pci 0000:02:00.0: [1002:68e0] type 00 class 0x030000
[ 0.263565] pci 0000:02:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.263576] pci 0000:02:00.0: reg 18: [mem 0xf2100000-0xf211ffff 64bit]
[ 0.263583] pci 0000:02:00.0: reg 20: [io 0x7000-0x70ff]
[ 0.263596] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.263627] pci 0000:02:00.0: supports D1 D2
[ 0.273013] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 0.273021] pci 0000:00:03.0: bridge window [io 0x7000-0x7fff]
[ 0.273024] pci 0000:00:03.0: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.273029] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.273076] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 0.273091] pci 0000:03:00.0: reg 10: [io 0x6000-0x60ff]
[ 0.273113] pci 0000:03:00.0: reg 18: [mem 0xf0010000-0xf0010fff 64bit pref]
[ 0.273128] pci 0000:03:00.0: reg 20: [mem 0xf0000000-0xf000ffff 64bit pref]
[ 0.273138] pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.273192] pci 0000:03:00.0: supports D1 D2
[ 0.273194] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285000] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[ 0.285007] pci 0000:00:05.0: bridge window [io 0x6000-0x6fff]
[ 0.285013] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.285073] pci 0000:04:00.0: [14e4:4727] type 00 class 0x028000
[ 0.285094] pci 0000:04:00.0: reg 10: [mem 0xf1100000-0xf1103fff 64bit]
[ 0.285193] pci 0000:04:00.0: supports D1 D2
[ 0.296987] pci 0000:00:07.0: PCI bridge to [bus 04-09]
[ 0.296994] pci 0000:00:07.0: bridge window [io 0x2000-0x5fff]
[ 0.296997] pci 0000:00:07.0: bridge window [mem 0xf1100000-0xf20fffff]
[ 0.297002] pci 0000:00:07.0: bridge window [mem 0xf0100000-0xf10fffff 64bit pref]
[ 0.297066] pci 0000:00:14.4: PCI bridge to [bus 0a-0a] (subtractive decode)
[ 0.297075] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.297078] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.297080] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.297083] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.297085] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.297088] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.297091] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.297093] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.297096] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.297099] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.297101] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.297104] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.297106] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.297109] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.297112] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.297114] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[ 0.297117] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[ 0.297142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.297338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.297377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB3_._PRT]
[ 0.297423] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.297461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 0.297520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.297584] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.297587] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.297589] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.300916] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.300974] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.301036] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.301094] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.301142] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.301178] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.301213] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.301248] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.301394] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.301400] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
[ 0.301403] vgaarb: loaded
[ 0.301404] vgaarb: bridge control possible 0000:02:00.0
[ 0.301406] vgaarb: bridge control possible 0000:01:05.0
[ 0.301556] SCSI subsystem initialized
[ 0.301675] libata version 3.00 loaded.
[ 0.301741] usbcore: registered new interface driver usbfs
[ 0.301750] usbcore: registered new interface driver hub
[ 0.301856] usbcore: registered new device driver usb
[ 0.302039] PCI: Using ACPI for IRQ routing
[ 0.302378] PCI: pci_cache_line_size set to 64 bytes
[ 0.302463] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.302465] reserve RAM buffer: 00000000ce4e5000 - 00000000cfffffff
[ 0.302468] reserve RAM buffer: 00000000cfd3f000 - 00000000cfffffff
[ 0.302471] reserve RAM buffer: 00000000cff00000 - 00000000cfffffff
[ 0.302569] NetLabel: Initializing
[ 0.302571] NetLabel: domain hash size = 128
[ 0.302573] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.302583] NetLabel: unlabeled traffic allowed by default
[ 0.302697] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.302702] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.304735] Switching to clocksource hpet
[ 0.311531] AppArmor: AppArmor Filesystem Enabled
[ 0.311560] pnp: PnP ACPI init
[ 0.311579] ACPI: bus type pnp registered
[ 0.311998] pnp 00:00: [bus 00-ff]
[ 0.312001] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.312004] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.312006] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.312009] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.312011] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.312013] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.312015] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.312017] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.312019] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.312021] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.312023] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.312025] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.312028] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.312030] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.312032] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.312034] pnp 00:00: [mem 0xd0000000-0xf7ffffff window]
[ 0.312036] pnp 00:00: [mem 0xfc000000-0xfed3ffff window]
[ 0.312038] pnp 00:00: [mem 0xfed45000-0xffffffff window]
[ 0.312040] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.312102] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.312284] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.312286] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.312288] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.312290] pnp 00:01: [mem 0xfed80000-0xfed80fff]
[ 0.312343] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.312346] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.312349] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.312351] system 00:01: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.312355] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312441] pnp 00:02: [io 0x0000-0x000f]
[ 0.312443] pnp 00:02: [io 0x0081-0x008f]
[ 0.312445] pnp 00:02: [io 0x00c0-0x00df]
[ 0.312448] pnp 00:02: [dma 4]
[ 0.312473] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.312481] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.312498] pnp 00:03: [irq 13]
[ 0.312524] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.312548] pnp 00:04: [io 0x0070-0x0071]
[ 0.312552] pnp 00:04: [irq 8]
[ 0.312576] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.312583] pnp 00:05: [io 0x0061]
[ 0.312609] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.312618] pnp 00:06: [io 0x0060]
[ 0.312620] pnp 00:06: [io 0x0064]
[ 0.312628] pnp 00:06: [irq 1]
[ 0.312652] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.312662] pnp 00:07: [irq 12]
[ 0.312690] pnp 00:07: Plug and Play ACPI device, IDs SYN1e25 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.312700] pnp 00:08: [io 0x0010-0x001f]
[ 0.312702] pnp 00:08: [io 0x002e-0x002f]
[ 0.312704] pnp 00:08: [io 0x0072-0x0073]
[ 0.312705] pnp 00:08: [io 0x0080]
[ 0.312707] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.312709] pnp 00:08: [io 0x0092]
[ 0.312711] pnp 00:08: [io 0x0400-0x04cf]
[ 0.312712] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.312714] pnp 00:08: [io 0x04d6]
[ 0.312716] pnp 00:08: [io 0x0680-0x06ff]
[ 0.312718] pnp 00:08: [io 0x077a]
[ 0.312719] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.312721] pnp 00:08: [io 0x0c14]
[ 0.312723] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.312725] pnp 00:08: [io 0x0c6c]
[ 0.312726] pnp 00:08: [io 0x0c6f]
[ 0.312728] pnp 00:08: [io 0x0cd0-0x0cdb]
[ 0.312800] system 00:08: [io 0x0400-0x04cf] has been reserved
[ 0.312803] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.312806] system 00:08: [io 0x04d6] has been reserved
[ 0.312808] system 00:08: [io 0x0680-0x06ff] has been reserved
[ 0.312810] system 00:08: [io 0x077a] has been reserved
[ 0.312815] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.312817] system 00:08: [io 0x0c14] has been reserved
[ 0.312819] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.312822] system 00:08: [io 0x0c6c] has been reserved
[ 0.312824] system 00:08: [io 0x0c6f] has been reserved
[ 0.312826] system 00:08: [io 0x0cd0-0x0cdb] has been reserved
[ 0.312830] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312867] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.312870] pnp 00:09: [mem 0xfec00000-0xfec000ef]
[ 0.312872] pnp 00:09: [mem 0xfed10000-0xfed10100]
[ 0.312874] pnp 00:09: [mem 0xfed61000-0xfed613ff]
[ 0.312876] pnp 00:09: [mem 0xfed80000-0xfed80fff]
[ 0.312878] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 0.312926] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.312929] system 00:09: [mem 0xfec00000-0xfec000ef] could not be reserved
[ 0.312932] system 00:09: [mem 0xfed10000-0xfed10100] has been reserved
[ 0.312935] system 00:09: [mem 0xfed61000-0xfed613ff] has been reserved
[ 0.312937] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.312940] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.312943] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.314281] pnp: PnP ACPI: found 10 devices
[ 0.314285] ACPI: ACPI bus type pnp unregistered
[ 0.317593] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.317629] pci 0000:00:05.0: BAR 14: assigned [mem 0xf2500000-0xf25fffff]
[ 0.317633] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.317637] pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
[ 0.317640] pci 0000:00:01.0: bridge window [mem 0xf2200000-0xf23fffff]
[ 0.317644] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.317651] pci 0000:02:00.0: BAR 6: assigned [mem 0xf2120000-0xf213ffff pref]
[ 0.317654] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 0.317656] pci 0000:00:03.0: bridge window [io 0x7000-0x7fff]
[ 0.317661] pci 0000:00:03.0: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.317664] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.317668] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0020000-0xf003ffff pref]
[ 0.317671] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[ 0.317673] pci 0000:00:05.0: bridge window [io 0x6000-0x6fff]
[ 0.317677] pci 0000:00:05.0: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.317680] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.317684] pci 0000:00:07.0: PCI bridge to [bus 04-09]
[ 0.317687] pci 0000:00:07.0: bridge window [io 0x2000-0x5fff]
[ 0.317690] pci 0000:00:07.0: bridge window [mem 0xf1100000-0xf20fffff]
[ 0.317693] pci 0000:00:07.0: bridge window [mem 0xf0100000-0xf10fffff 64bit pref]
[ 0.317697] pci 0000:00:14.4: PCI bridge to [bus 0a-0a]
[ 0.317717] pci 0000:00:01.0: setting latency timer to 64
[ 0.317747] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.317749] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.317752] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.317754] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.317756] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.317758] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.317760] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.317763] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.317765] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.317767] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.317769] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.317771] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.317774] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.317776] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.317778] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf7ffffff]
[ 0.317780] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 0.317782] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.317785] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
[ 0.317787] pci_bus 0000:01: resource 1 [mem 0xf2200000-0xf23fffff]
[ 0.317789] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.317792] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
[ 0.317794] pci_bus 0000:02: resource 1 [mem 0xf2100000-0xf21fffff]
[ 0.317796] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.317799] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
[ 0.317801] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
[ 0.317803] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.317805] pci_bus 0000:04: resource 0 [io 0x2000-0x5fff]
[ 0.317807] pci_bus 0000:04: resource 1 [mem 0xf1100000-0xf20fffff]
[ 0.317810] pci_bus 0000:04: resource 2 [mem 0xf0100000-0xf10fffff 64bit pref]
[ 0.317812] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.317814] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.317817] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.317819] pci_bus 0000:0a: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.317821] pci_bus 0000:0a: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.317823] pci_bus 0000:0a: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.317825] pci_bus 0000:0a: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.317828] pci_bus 0000:0a: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.317830] pci_bus 0000:0a: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.317832] pci_bus 0000:0a: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.317834] pci_bus 0000:0a: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.317836] pci_bus 0000:0a: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.317839] pci_bus 0000:0a: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.317841] pci_bus 0000:0a: resource 17 [mem 0x000ec000-0x000effff]
[ 0.317843] pci_bus 0000:0a: resource 18 [mem 0xd0000000-0xf7ffffff]
[ 0.317845] pci_bus 0000:0a: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 0.317847] pci_bus 0000:0a: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.317899] NET: Registered protocol family 2
[ 0.318022] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.319021] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.322042] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.322399] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.322402] TCP: reno registered
[ 0.322415] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.322451] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.322555] NET: Registered protocol family 1
[ 0.322566] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.011949] pci 0000:01:05.0: Boot video device
[ 1.011968] PCI: CLS 64 bytes, default 64
[ 1.012023] Trying to unpack rootfs image as initramfs...
[ 1.218821] Freeing initrd memory: 9252k freed
[ 1.222045] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.222049] Placing 64MB software IO TLB between ffff8800ca4e5000 - ffff8800ce4e5000
[ 1.222051] software IO TLB at phys 0xca4e5000 - 0xce4e5000
[ 1.222139] Simple Boot Flag at 0x44 set to 0x1
[ 1.222422] LVT offset 1 assigned for vector 0x400
[ 1.222433] IBS: LVT offset 1 assigned
[ 1.222447] perf: AMD IBS detected (0x0000001f)
[ 1.222657] audit: initializing netlink socket (disabled)
[ 1.222672] type=2000 audit(1342380640.104:1): initialized
[ 1.246593] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.248775] VFS: Disk quotas dquot_6.5.2
[ 1.248817] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.249401] fuse init (API version 7.18)
[ 1.249538] msgmni has been set to 7388
[ 1.250043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.250111] io scheduler noop registered
[ 1.250115] io scheduler deadline registered
[ 1.250174] io scheduler cfq registered (default)
[ 1.250452] pcieport 0000:00:03.0: irq 40 for MSI/MSI-X
[ 1.250605] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 1.250740] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 1.250848] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.250874] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.252188] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.255307] ACPI: AC Adapter [ACAD] (off-line)
[ 1.255421] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.255426] ACPI: Power Button [PWRB]
[ 1.255482] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.257454] ACPI: Lid Switch [LID]
[ 1.257523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.257529] ACPI: Power Button [PWRF]
[ 1.257628] ACPI: processor limited to max C-state 1
[ 1.266540] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.266545] ACPI: Thermal Zone [TSZ0] (57 C)
[ 1.266601] GHES: HEST is not enabled!
[ 1.266720] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.268346] Linux agpgart interface v0.103
[ 1.271273] brd: module loaded
[ 1.272332] loop: module loaded
[ 1.272555] ahci 0000:00:11.0: version 3.0
[ 1.272634] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
[ 1.272710] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.272714] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.273100] scsi0 : ahci
[ 1.273360] scsi1 : ahci
[ 1.273476] ata1: SATA max UDMA/133 abar m1024@0xf2406000 port 0xf2406100 irq 43
[ 1.273480] ata2: SATA max UDMA/133 abar m1024@0xf2406000 port 0xf2406180 irq 43
[ 1.273793] Fixed MDIO Bus: probed
[ 1.273807] tun: Universal TUN/TAP device driver, 1.6
[ 1.273808] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.273893] PPP generic driver version 2.4.2
[ 1.273986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.274077] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 1.274081] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.274140] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.274149] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.274167] QUIRK: Enable AMD PLL fix
[ 1.274178] ehci_hcd 0000:00:12.2: debug port 1
[ 1.274203] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf2406500
[ 1.283571] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.283730] hub 1-0:1.0: USB hub found
[ 1.283734] hub 1-0:1.0: 5 ports detected
[ 1.283922] ehci_hcd 0000:00:16.2: setting latency timer to 64
[ 1.283926] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.284004] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 2
[ 1.284012] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.284034] ehci_hcd 0000:00:16.2: debug port 1
[ 1.284049] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf2406400
[ 1.287998] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.288006] ACPI: Battery Slot [BATT] (battery present)
[ 1.295537] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.295703] hub 2-0:1.0: USB hub found
[ 1.295708] hub 2-0:1.0: 4 ports detected
[ 1.295827] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.295926] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 1.295929] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.296008] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.296039] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf2405000
[ 1.355660] hub 3-0:1.0: USB hub found
[ 1.355672] hub 3-0:1.0: 5 ports detected
[ 1.355863] ohci_hcd 0000:00:16.0: setting latency timer to 64
[ 1.355867] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.355957] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 4
[ 1.355977] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf2404000
[ 1.415537] hub 4-0:1.0: USB hub found
[ 1.415545] hub 4-0:1.0: 4 ports detected
[ 1.415663] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.415742] usbcore: registered new interface driver libusual
[ 1.415780] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.421790] i8042: Detected active multiplexing controller, rev 1.1
[ 1.423844] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.423853] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.423880] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.423899] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.423918] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.424075] mousedev: PS/2 mouse device common for all mice
[ 1.424263] rtc_cmos 00:04: RTC can wake from S4
[ 1.424409] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.424434] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.424502] device-mapper: uevent: version 1.0.3
[ 1.424603] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.424611] cpuidle: using governor ladder
[ 1.424612] cpuidle: using governor menu
[ 1.424614] EFI Variables Facility v0.08 2004-May-17
[ 1.424705] TCP: cubic registered
[ 1.424790] NET: Registered protocol family 10
[ 1.424976] NET: Registered protocol family 17
[ 1.424988] Registering the dns_resolver key type
[ 1.425214] PM: Hibernation image not present or could not be loaded.
[ 1.425233] registered taskstats version 1
[ 1.430095] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.433650] Magic number: 4:626:546
[ 1.433673] tty ttyS22: hash matches
[ 1.433696] mem null: hash matches
[ 1.433780] rtc_cmos 00:04: setting system clock to 2012-07-15 19:30:41 UTC (1342380641)
[ 1.433787] powernow-k8: Found 1 AMD Athlon(tm) II P340 Dual-Core Processor (2 cpu cores) (version 2.20.00)
[ 1.433827] powernow-k8: 0 : pstate 0 (2200 MHz)
[ 1.433829] powernow-k8: 1 : pstate 1 (1600 MHz)
[ 1.433831] powernow-k8: 2 : pstate 2 (800 MHz)
[ 1.433941] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.433945] EDD information not available.
[ 1.706998] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.762904] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.762944] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.782064] ata2.00: ATAPI: hp CDDVDW TS-L633N, 0300, max UDMA/100
[ 1.801799] ata2.00: configured for UDMA/100
[ 1.820588] ata1.00: ATA-8: OCZ-VERTEX2, 1.33, max UDMA/133
[ 1.820592] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.880569] ata1.00: configured for UDMA/133
[ 1.880822] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.33 PQ: 0 ANSI: 5
[ 1.881030] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.881036] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.881084] sd 0:0:0:0: [sda] Write Protect is off
[ 1.881087] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.881103] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.882158] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.882761] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633N 0300 PQ: 0 ANSI: 5
[ 1.882794] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.891730] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.891735] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.891897] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.891975] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.893508] Freeing unused kernel memory: 916k freed
[ 1.893782] Write protecting the kernel read-only data: 12288k
[ 1.898775] Freeing unused kernel memory: 1556k freed
[ 1.903074] Freeing unused kernel memory: 1196k freed
[ 1.923209] udev: starting version 151
[ 1.923285] udevd (118): /proc/118/oom_adj is deprecated, please use /proc/118/oom_score_adj instead.
[ 1.971990] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.972093] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
[ 1.972278] r8169 0000:03:00.0: eth0: RTL8102e at 0xffffc9000065e000, 90:fb:a6:ae:e9:14, XID 04e00000 IRQ 44
[ 2.033683] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 2.218231] Refined TSC clocksource calibration: 2194.504 MHz.
[ 2.218237] Switching to clocksource tsc
[ 2.223367] Adding 3613692k swap on /dev/sda3. Priority:-1 extents:1 across:3613692k SS
[ 2.268243] EXT4-fs (sda6): re-mounted. Opts: discard,errors=remount-ro
[ 2.291626] udev: starting version 151
[ 2.354988] lp: driver loaded but no devices found
[ 2.390725] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
[ 2.403994] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
[ 2.497505] bcma: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 2.497530] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 2.497549] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 2.497588] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 2.527918] bcma: Bus registered
[ 2.527971] MCE: In-kernel MCE decoding enabled.
[ 2.528416] microcode: CPU0: patch_level=0x010000b6
[ 2.528843] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.529068] EDAC MC: Ver: 2.1.0
[ 2.530935] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.538092] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
[ 2.538883] sp5100_tco: mmio address 0xb8fe00 already in use
[ 2.558363] wmi: Mapper loaded
[ 2.567466] AMD64 EDAC driver v3.4.0
[ 2.578823] EDAC amd64: DRAM ECC disabled.
[ 2.578835] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 2.578837] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 2.578838] (Note that use of the override may cause unknown side effects.)
[ 2.621156] acpi device:02: registered as cooling_device2
[ 2.627426] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[ 2.628029] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 2.687780] type=1400 audit(1342380642.749:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=519 comm="apparmor_parser"
[ 2.689828] type=1400 audit(1342380642.753:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=519 comm="apparmor_parser"
[ 2.689869] type=1400 audit(1342380642.753:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=519 comm="apparmor_parser"
[ 2.691489] acpi device:0b: registered as cooling_device3
[ 2.691594] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:02/input/input5
[ 2.692388] ACPI: Video Device [VGA2] (multi-head: yes rom: no post: no)
[ 2.731937] type=1400 audit(1342380642.793:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=550 comm="apparmor_parser"
[ 2.732003] type=1400 audit(1342380642.793:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=550 comm="apparmor_parser"
[ 2.732043] type=1400 audit(1342380642.793:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=550 comm="apparmor_parser"
[ 2.775305] r8169 0000:03:00.0: eth0: link down
[ 2.775344] r8169 0000:03:00.0: eth0: link down
[ 2.778083] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.797353] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 2.797358] Disabling lock debugging due to kernel taint
[ 2.829432] usb 3-1: new full-speed USB device number 2 using ohci_hcd
[ 2.914787] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 2.927788] type=1400 audit(1342380642.989:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=583 comm="apparmor_parser"
[ 2.927851] type=1400 audit(1342380642.989:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=583 comm="apparmor_parser"
[ 2.927891] type=1400 audit(1342380642.989:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=583 comm="apparmor_parser"
[ 2.952827] [fglrx] Maximum main memory to use for locked dma buffers: 3540 MBytes.
[ 2.952909] [fglrx] vendor: 1002 device: 9712 count: 1
[ 2.953090] [fglrx] vendor: 1002 device: 68e0 count: 2
[ 2.955155] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 2.955225] microcode: CPU1: patch_level=0x010000b6
[ 2.959690] [fglrx] ioport: bar 1, base 0x8000, size: 0x100
[ 2.959709] pci 0000:01:05.0: setting latency timer to 64
[ 2.962446] cfg80211: Calling CRDA to update world regulatory domain
[ 2.964216] [fglrx] ioport: bar 4, base 0x7000, size: 0x100
[ 2.964231] pci 0000:02:00.0: enabling device (0000 -> 0003)
[ 2.964438] [fglrx] Kernel PAT support is enabled
[ 2.964468] [fglrx] module loaded - fglrx 8.97.2 [Jul 4 2012] with 2 minors
[ 2.983830] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 2.983986] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.007285] cfg80211: World regulatory domain updated:
[ 3.007289] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.007293] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.007295] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3.007298] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3.007300] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.007302] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.038773] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 19
[ 3.049962] ieee80211 phy0: brcmsmac: fail to load firmware brcm/bcm43xx-0.fw
[ 3.050034] ieee80211 phy0: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm
[ 3.050071] brcmsmac: brcms_bcma_probe: brcms_attach failed!
[ 3.066176] Linux video capture interface: v2.00
[ 3.070944] uvcvideo: Found UVC 1.00 device HP Webcam-101 (0bda:5801)
[ 3.088695] input: HP Webcam-101 as /devices/pci0000:00/0000:00:16.2/usb2/2-1/2-1:1.0/input/input7
[ 3.088866] usbcore: registered new interface driver uvcvideo
[ 3.088869] USB Video Class driver (1.1.1)
[ 3.091842] snd_hda_intel 0000:00:14.2: setting latency timer to 64
[ 3.108547] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input8
[ 3.108805] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input0
[ 3.116486] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input9
[ 3.117581] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1/input1
[ 3.117660] usbcore: registered new interface driver usbhid
[ 3.117662] usbhid: USB HID core driver
[ 3.163494] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 3.163612] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 3.171348] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 3.386823] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0xa0400
[ 3.433523] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input12
[ 4.060445] [fglrx] module unloaded - fglrx 8.97.2 [Jul 4 2012]
[ 4.077942] [fglrx] Maximum main memory to use for locked dma buffers: 3540 MBytes.
[ 4.078022] [fglrx] vendor: 1002 device: 9712 count: 1
[ 4.078202] [fglrx] vendor: 1002 device: 68e0 count: 2
[ 4.078461] [fglrx] ioport: bar 1, base 0x8000, size: 0x100
[ 4.078477] pci 0000:01:05.0: setting latency timer to 64
[ 4.078692] [fglrx] ioport: bar 4, base 0x7000, size: 0x100
[ 4.078888] [fglrx] Kernel PAT support is enabled
[ 4.078915] [fglrx] module loaded - fglrx 8.97.2 [Jul 4 2012] with 2 minors
[ 4.086245] vgaarb: this pci device is not a vga device
[ 4.086257] vgaarb: this pci device is not a vga device
[ 4.086267] vgaarb: this pci device is not a vga device
[ 4.086275] vgaarb: this pci device is not a vga device
[ 4.086284] vgaarb: this pci device is not a vga device
[ 4.086293] vgaarb: this pci device is not a vga device
[ 4.086302] vgaarb: this pci device is not a vga device
[ 4.086310] vgaarb: this pci device is not a vga device
[ 4.086319] vgaarb: this pci device is not a vga device
[ 4.086327] vgaarb: this pci device is not a vga device
[ 4.086336] vgaarb: this pci device is not a vga device
[ 4.086345] vgaarb: this pci device is not a vga device
[ 4.086353] vgaarb: this pci device is not a vga device
[ 4.086362] vgaarb: this pci device is not a vga device
[ 4.086370] vgaarb: this pci device is not a vga device
[ 4.086379] vgaarb: this pci device is not a vga device
[ 4.086388] vgaarb: this pci device is not a vga device
[ 4.086397] vgaarb: this pci device is not a vga device
[ 4.086406] vgaarb: this pci device is not a vga device
[ 4.086424] vgaarb: this pci device is not a vga device
[ 4.086441] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 4.086455] vgaarb: this pci device is not a vga device
[ 4.086466] vgaarb: this pci device is not a vga device
[ 4.091898] [fglrx] ATIF platform detected with notification ID: 0x81
[ 4.243661] [fglrx] GART Table is not in FRAME_BUFFER range
[ 4.243898] [fglrx] Could not enable MSI; System prevented initialization
[ 4.244460] [fglrx] Firegl kernel thread PID: 957
[ 4.244518] [fglrx] Firegl kernel thread PID: 958
[ 4.244574] [fglrx] Firegl kernel thread PID: 959
[ 4.244685] [fglrx] IRQ 18 Enabled
[ 4.527792] [fglrx] Gart USWC size:1156 M.
[ 4.527796] [fglrx] Gart cacheable size:458 M.
[ 4.527801] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 4.527803] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[ 4.727432] r8169 0000:03:00.0: eth0: link up
[ 4.727881] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.458202] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 10.620052] audit_printk_skb: 21 callbacks suppressed
[ 10.620056] type=1400 audit(1342369850.724:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=765 comm="apparmor_parser"
[ 10.620587] type=1400 audit(1342369850.724:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=765 comm="apparmor_parser"
[ 10.621107] type=1400 audit(1342369850.724:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=765 comm="apparmor_parser"
[ 10.945021] vboxdrv: Found 2 processor cores.
[ 10.954763] vboxdrv: fAsync=0 offMin=0x499 offMax=0x2653
[ 10.954868] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 10.954870] vboxdrv: Successfully loaded version 4.1.18 (interface 0x00190000).
[ 11.299626] vboxpci: IOMMU not found (not registered)
[ 11.414890] ppdev: user-space parallel port driver
[ 15.496610] eth0: no IPv6 routers present
[ 20.146421] teredo: no IPv6 routers present
sotiris@sotiris-laptop:~$

EDIT: Για δώσε και το αποτέλεσμα του:

Κώδικας: Επιλογή όλων

sotiris@sotiris-laptop:~$ ls -l /lib/firmware/brcm
ls: αδυναμία πρόσβασης του /lib/firmware/brcm: Δεν υπάρχει τέτοιο αρχείο ή κατάλογος
sotiris@sotiris-laptop:~$


Αν δεις κάποια εγγραφή για κάποιο από τα modules που αναφέρθηκαν εδώ, καλύτερα γράφτην να την δούμε
Υπάρχει ένα αρχείο που λέγεται blacllist-local.conf και μέσα περιέχει μόνο την εγγραφή blacklist wl

[Learner]

Επίσης το b43 δεν υποστηρίζει τη συσκευή σου. Αλλά το brcmsmac.

Η συγκεκριμένη κάρτα modenas88 έχει πρόβλημα με τους οδηγούς. Βρήκα και αυτό εδώ για κοιτάξτε το λίγο http://ubuntuforums.org/showthread.php?t=1889170 , στο 5ο ποστ γράφει για την 10.04 . Βέβαια γράφει για την 10.04 με τον original πυρήνα που "φοράει" . Όχι με custom πυρήνα , όπως έχει βάλει ο sotos21.

[modenas88]

[ 3.049962] ieee80211 phy0: brcmsmac: fail to load firmware brcm/bcm43xx-0.fw
[ 3.050034] ieee80211 phy0: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm
[ 3.050071] brcmsmac: brcms_bcma_probe: brcms_attach failed!

Κάτι αναμενόμενο!
Πήγαινε στο https://git.kernel.org/?p=linux/kernel/git/firmware/linux-firmware.git;a=tree;f=brcm;h=3a4fe011a20035ff8de0ba7f7c25fca8bf9959b9;hb=HEAD και κατέβασε τα δύο αρχεία bcm43xx-0.fw και bcm43xx_hdr-0.fw.
Μετά θα τα βάλουμε εκεί που υπάρχουν και στην 12.04 με το πακέτο linux-firmware. Δηλαδή...

Κώδικας: Επιλογή όλων

sudo mkdir /lib/firmware/brcm
sudo cp /path/to/bcm43xx-0.fw /lib/firmware/brcm
sudo cp /path/to/bcm43xx_hdr-0.fw /lib/firmware/brcm

και μια επανεκκίνηση για να ελέγξεις.

EDIT: Είχα γράψει λάθος τη διαδρομή /lib/firmware/bcma. Το διόρθωσα ως /lib/firmware/brcm