TP-LINK TL-WN751ND κολλάει ο υπολογιστής μετά την σύνδεση.

[cdmc]

Καλησπέρα σε όλους,

έχω έναν -παλιό ομολογουμένως- υπολογιστή pentium 4 στα 3,2 GHz με 1GB μνήμη και τρέχει Ubuntu 12.04. Απίστευτα καλά και χωρίς κανένα πρόβλημα όταν είναι συνδεδεμένος με ethernet καλώδιο.

Πρόσφατα αποφάσισα να αγοράσω μια κάρτα δικτύου για τον υπολογιστή μου, αφού έκανα μια μικρή αναζήτηση σε διάφορα forums κατέληξα να αγοράσω την TP-LINK TL-WN751ND αφού είχα διαβάσει ότι είναι συμβατή και δουλεύει καλά.

Δυστυχώς όμως τα πράγματα δεν είναι έτσι ακριβώς, γεγονός είναι ότι η κάρτα δουλεύει αμέσως "straight out the box" αλλά μετά από 10-90 δευτερόλεπτα ο υπολογιστής κολλάει και μόνο με reset φεύγει απο την κατάσταση αυτή. Αν όμως δεν συνδεθώ στο δίκτυο ο υπολογιστής δουλεύει άψογα.

Ένα αντίστοιχο πρόβλημα είχε και ο φίλος poscore στο post που έκανε viewtopic.php?f=39&t=24134 και το πρόβλημα του λύθηκε.

Εγώ είμαι αρχάριος στο Linux και δυστυχώς δεν ξέρω τι να κάνω για να λύσω το πρόβλημα, δοκίμασα να ξαναπεράσω το ubuntu, να αλάξω slot στην κάρτα, να τρέξω παλιότερες εκδόσεις ubuntu, ακόμη και mint 12 δοκίμασα. Μάταια όμως, το πρόλημα παραμένει.
Έχω πελαγώσει δεν ξέρω τι να κάνω δεν θέλω να τρέχω πάλι windows.

[konnn]

Καλησπέρα και καλώς ήρθες στην κοινότητα.

δοκίμασα να ξαναπεράσω το ubuntu,

Κατά την επανεγκατάσταση επέλεξες να γίνει κατέβασμα των τελευταίων ενημερώσεων;Αν όχι, κάνε το και πρώτη σου δουλειά είναι να τις εγκαταστήσεις, έπειτα την πρώτη επανεκκίνηση. Υπάρχουν αρκετές αναφορές με το θέμα σου και κάποια από αυτή αναφέρει πρόβλημα του πυρήνα.
Προτείνω επανεγκατάσταση, με ενημερώσεις, και αν συνεχιστεί άλλαξε γραφικό περιβάλλον όπως προ-διάβασες. Πως θα γίνει αυτό; ρωτάς με νέα δημοσίευση.
Εδώ είμαστε για ό,τι χρειαστείς.
Καλή συνέχεια.

[the_eye]

!

Μήνυμα ενημέρωσης προς τον/την cdmc Σε παρακαλούμε να διαβάσεις τις οδηγίες προς νεοεισερχόμενους προσεκτικά. Είναι σημαντική η προσάρτηση της υπογραφής με τα χαρακτηριστικά του υπολογιστή σου hardware id (πχ [10ec:8168]), έτσι ώστε να δίνονται συγκεκριμένες πληροφορίες όταν πρόκειται για επίλυση ενός προβλήματός σου. Οι αλλαγές μπορούν να γίνουν από τον πίνακα ελέγχου αλλά και με το αυτόματο script που θα το βρεις παρακάτω. Αυτόματο script υπογραφής

[Learner]

Δυστυχώς όμως τα πράγματα δεν είναι έτσι ακριβώς, γεγονός είναι ότι η κάρτα δουλεύει αμέσως "straight out the box" αλλά μετά από 10-90 δευτερόλεπτα ο υπολογιστής κολάει και μόνο με reset φεύγει απο την κατάσταση αυτή. Αν όμως δεν συνδεθώ στο δίκτυο ο υπολογιστής δουλεύει άψογα.

Αυτό πιθανών να είναι και bug κάποιου πακέτου. Το έχω διαβάσει - συναντήσει ξανά .

Πολλές τέτοιες κάρτες έχουν 2 interfaces , το ένα είναι Usb-mass-storage και το άλλο είναι wireless interface.
Πιθανών να φταίει το πακέτο Usb-modeswitch.
Δεν κάνουμε τίποτα όμως αν δεν δώσεις πρώτα στοιχεία (για να ξέρουμε τι κάνουμε).
Οπότε κοίτα πρώτα το μήνυμα του the_eye και φτιάξε την υπογραφή κατάλληλα.
Μετά άνοιξε ένα τερματικό (ctrl+alt+t) και ακολούθα τα παρακάτω με τη σειρά :
1) σύνδεσε το Usb
2) γράψε στο τερματικό το εξής

Κώδικας: Επιλογή όλων

dmesg | tail -n 30

3)Τα αποτελέσματα που θα σου βγάλει κάνε τα ένα paste εδώ στο φόρουμ ανάμεσα σε κώδικα.

[cοde]τα αποτελέσματα εδώ[/cοde].

Edit : Νόμιζα πως ήταν Usb.. sorry

[modenas88]

Αυτή η κάρτα είναι ασύρματη (Wi-Fi) και συνδέεται σε θύρα PCI (μέσα στο κουτί). Οπότε ανοίγοντας το τερματικό (ctrl+alt+t) αντέγραψε μια-μια τις δύο παρακάτω εντολές, πατώντας σε κάθε μια Enter.

Κώδικας: Επιλογή όλων

lspci -nnk | grep -A 2 0280
dmesg > dmesg.txt

Εδώ ανέβασε το αποτέλεσμα που θα εμφανιστεί από την πρώτη εντολή που είναι κάτι σαν το δικό μου:

Κώδικας: Επιλογή όλων

01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: ASRock Incorporation Device [1849:8136]
Kernel driver in use: r8169

και το περιεχόμενο του αρχείο dmesg.txt που θα έχει δημιουργηθεί στο προσωπικό σου φάκελο (αφού εκτελεστεί η 2η εντολή).

Καλώς ήρθες!

[cdmc]

Καλως σας βρήκα και σας ευχαριστώ όλους για την άμεση ανταπόκριση σας.

Φίλε konn έκανα μια φρέσκια εγκατάσαση του 12.04 με υποστήριξη δικτύου (ethernet καλώδιο) και άμεση εγκατάσταση των ενημερώσεων αλλά τίποτα.
Όσο για να αλλάξω γραφικό περιβάλλον δεν θα το επιθυμούσα για τον λόγο ότι σε αυτόν τον υπολογιστή παίζει και η κόρη μου και δεν θα ήταν έυκολο για αυτήν αλλά ούτε και για μένα να αλλάξουμε περιβάλλον.

Φίλε Learner τα αποτελέσματα της εντολής που μου είπες είναι τα εξής :

Κώδικας: Επιλογή όλων

[ 16.371036] Bluetooth: HCI socket layer initialized
[ 16.371040] Bluetooth: L2CAP socket layer initialized
[ 16.371054] Bluetooth: SCO socket layer initialized
[ 16.424349] Bluetooth: RFCOMM TTY layer initialized
[ 16.424371] Bluetooth: RFCOMM socket layer initialized
[ 16.424376] Bluetooth: RFCOMM ver 1.11
[ 16.493975] init: failsafe main process (717) killed by TERM signal
[ 16.521899] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.521906] Bluetooth: BNEP filters: protocol multicast
[ 16.896853] type=1400 audit(1343644264.533:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=771 comm="apparmor_parser"
[ 18.464522] 8139too 0000:02:01.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 18.601730] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.455416] audit_printk_skb: 15 callbacks suppressed
[ 21.455423] type=1400 audit(1343644269.089:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=853 comm="apparmor_parser"
[ 21.456855] type=1400 audit(1343644269.093:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=853 comm="apparmor_parser"
[ 22.986170] type=1400 audit(1343644270.621:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=934 comm="apparmor_parser"
[ 22.987091] type=1400 audit(1343644270.621:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=934 comm="apparmor_parser"
[ 23.566547] type=1400 audit(1343644271.201:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=936 comm="apparmor_parser"
[ 28.848015] eth0: no IPv6 routers present
[ 31.307383] type=1400 audit(1343644278.319:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=849 comm="apparmor_parser"
[ 31.309479] type=1400 audit(1343644278.323:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=849 comm="apparmor_parser"
[ 31.310188] type=1400 audit(1343644278.323:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=849 comm="apparmor_parser"
[ 31.311770] type=1400 audit(1343644278.323:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=849 comm="apparmor_parser"
[ 31.313473] type=1400 audit(1343644278.327:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=849 comm="apparmor_parser"
[ 31.314174] type=1400 audit(1343644278.327:27): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=849 comm="apparmor_parser"
[ 31.315312] type=1400 audit(1343644278.327:28): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=849 comm="apparmor_parser"
[ 31.316469] type=1400 audit(1343644278.331:29): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=849 comm="apparmor_parser"
[ 34.523967] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 34.523974] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[ 73.343162] type=1400 audit(1343644320.355:30): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1927 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0


και τέλος φίλε modenas88 τα αποτελέσματα έχουν ως εξής:

Κώδικας: Επιλογή όλων


02:0a.0 Network controller [0280]: Atheros Communications Inc. AR9227 Wireless Network Adapter [168c:002d] (rev 01)
Subsystem: Atheros Communications Inc. Device [168c:0301]
Kernel driver in use: ath9k


και το dmesg.txt είναι

Κώδικας: Επιλογή όλων


[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-27-generic-pae (buildd@akateko) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #43-Ubuntu SMP Fri Jul 6 15:06:05 UTC 2012 (Ubuntu 3.2.0-27.43-generic-pae 3.2.21)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.2 present.
[ 0.000000] DMI: infoquest /I865P/PE, BIOS 6.00 PG 08/03/2004
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f5800] f5800
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[ 0.000000] RAMDISK: 364f0000 - 37270000
[ 0.000000] ACPI: RSDP 000f71c0 00014 (v00 IntelR)
[ 0.000000] ACPI: RSDT 3fff3000 0002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 3fff3040 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 3fff30c0 042A6 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3fff0000 00040
[ 0.000000] ACPI: APIC 3fff7380 00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 131MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] free_area_init_node: node 0, pgdat c18669c0, node_mem_map f73fd200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 264 pages used for memmap
[ 0.000000] HighMem zone: 33514 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f73da000 s34240 r0 d23104 u57344
[ 0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-27-generic-pae root=UUID=36dbf349-3c03-43ff-abaf-9bde54f1a4e3 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4193792 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0003fff0)
[ 0.000000] Memory: 1010644k/1048512k available (5815k kernel code, 37416k reserved, 2840k data, 740k init, 135112k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1875000 - 0xc192e000 ( 740 kB)
[ 0.000000] .data : 0xc15ade64 - 0xc18741c0 (2840 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15ade64 (5815 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3200.620 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6401.24 BogoMIPS (lpj=12802480)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004041] Security Framework initialized
[ 0.004071] AppArmor: AppArmor initialized
[ 0.004074] Yama: becoming mindful.
[ 0.004155] Mount-cache hash table entries: 512
[ 0.004342] Initializing cgroup subsys cpuacct
[ 0.004350] Initializing cgroup subsys memory
[ 0.004362] Initializing cgroup subsys devices
[ 0.004365] Initializing cgroup subsys freezer
[ 0.004368] Initializing cgroup subsys blkio
[ 0.004379] Initializing cgroup subsys perf_event
[ 0.004420] CPU: Physical Processor ID: 0
[ 0.004423] CPU: Processor Core ID: 0
[ 0.004428] mce: CPU supports 4 MCE banks
[ 0.004441] CPU0: Thermal monitoring enabled (TM1)
[ 0.004447] using mwait in idle threads.
[ 0.008762] ACPI: Core revision 20110623
[ 0.012021] ftrace: allocating 26540 entries in 52 pages
[ 0.016075] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016418] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056271] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
[ 0.060003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 18
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 0000007fffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000003ffff
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] CPU 1 irqstacks, hard=f5cb0000 soft=f5cb2000
[ 0.060003] Booting Node 0, Processors #1 Ok.
[ 0.060003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.148053] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148112] Brought up 2 CPUs
[ 0.148117] Total of 2 processors activated (12802.70 BogoMIPS).
[ 0.149076] devtmpfs: initialized
[ 0.149076] EVM: security.selinux
[ 0.149076] EVM: security.SMACK64
[ 0.149076] EVM: security.capability
[ 0.149076] PM: Registering ACPI NVS region at 3fff0000 (12288 bytes)
[ 0.149799] print_constraints: dummy:
[ 0.149832] RTC time: 13:30:47, date: 07/30/12
[ 0.149885] NET: Registered protocol family 16
[ 0.149900] Trying to unpack rootfs image as initramfs...
[ 0.150142] EISA bus registered
[ 0.150158] ACPI: bus type pci registered
[ 0.153152] PCI: PCI BIOS revision 2.10 entry at 0xfb9f0, last bus=2
[ 0.153157] PCI: Using configuration type 1 for base access
[ 0.160207] bio: create slab <bio-0> at 0
[ 0.160333] ACPI: Added _OSI(Module Device)
[ 0.160339] ACPI: Added _OSI(Processor Device)
[ 0.160344] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.160349] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.162100] ACPI: EC: Look up EC in DSDT
[ 0.168459] ACPI: Interpreter enabled
[ 0.168474] ACPI: (supports S0 S1 S4 S5)
[ 0.168515] ACPI: Using IOAPIC for interrupt routing
[ 0.176755] ACPI: No dock devices found.
[ 0.176762] HEST: Table not found.
[ 0.176771] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.176888] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.177136] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.177143] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.177148] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.177154] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.177160] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[ 0.177184] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600
[ 0.177191] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.177205] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[ 0.177295] pci 0000:00:01.0: [8086:2571] type 1 class 0x000604
[ 0.177348] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880
[ 0.177364] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[ 0.177464] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
[ 0.177524] pci 0000:00:1d.0: reg 20: [io 0xbc00-0xbc1f]
[ 0.177571] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
[ 0.177627] pci 0000:00:1d.1: reg 20: [io 0xb000-0xb01f]
[ 0.177673] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
[ 0.177733] pci 0000:00:1d.2: reg 20: [io 0xb400-0xb41f]
[ 0.177780] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
[ 0.177836] pci 0000:00:1d.3: reg 20: [io 0xb800-0xb81f]
[ 0.177892] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
[ 0.177918] pci 0000:00:1d.7: reg 10: [mem 0xfa100000-0xfa1003ff]
[ 0.178020] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.178029] pci 0000:00:1d.7: PME# disabled
[ 0.178050] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.178113] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
[ 0.178191] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.178222] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
[ 0.178242] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.178256] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.178270] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.178284] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.178298] pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f]
[ 0.178312] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.178350] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101
[ 0.178367] pci 0000:00:1f.2: reg 10: [io 0xc000-0xc007]
[ 0.178380] pci 0000:00:1f.2: reg 14: [io 0xc400-0xc403]
[ 0.178393] pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807]
[ 0.178406] pci 0000:00:1f.2: reg 1c: [io 0xcc00-0xcc03]
[ 0.178419] pci 0000:00:1f.2: reg 20: [io 0xd000-0xd00f]
[ 0.178463] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
[ 0.178523] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.178575] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401
[ 0.178596] pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff]
[ 0.178609] pci 0000:00:1f.5: reg 14: [io 0xdc00-0xdc3f]
[ 0.178623] pci 0000:00:1f.5: reg 18: [mem 0xfa101000-0xfa1011ff]
[ 0.178637] pci 0000:00:1f.5: reg 1c: [mem 0xfa102000-0xfa1020ff]
[ 0.178695] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.178703] pci 0000:00:1f.5: PME# disabled
[ 0.178744] pci 0000:01:00.0: [10de:0322] type 0 class 0x000300
[ 0.178766] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf8ffffff]
[ 0.178778] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
[ 0.178817] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.178898] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.178908] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.178915] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.178949] pci 0000:02:01.0: [10ec:8139] type 0 class 0x000200
[ 0.178972] pci 0000:02:01.0: reg 10: [io 0xa000-0xa0ff]
[ 0.178985] pci 0000:02:01.0: reg 14: [mem 0xfa010000-0xfa0100ff]
[ 0.179067] pci 0000:02:01.0: supports D1 D2
[ 0.179072] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.179080] pci 0000:02:01.0: PME# disabled
[ 0.179115] pci 0000:02:0a.0: [168c:002d] type 0 class 0x000280
[ 0.179138] pci 0000:02:0a.0: reg 10: [mem 0xfa000000-0xfa00ffff]
[ 0.179224] pci 0000:02:0a.0: PME# supported from D0 D3hot
[ 0.179231] pci 0000:02:0a.0: PME# disabled
[ 0.179255] pci 0000:02:0b.0: [11c1:048f] type 0 class 0x000780
[ 0.179277] pci 0000:02:0b.0: reg 10: [mem 0xfa011000-0xfa0110ff]
[ 0.179291] pci 0000:02:0b.0: reg 14: [io 0xa400-0xa407]
[ 0.179305] pci 0000:02:0b.0: reg 18: [io 0xa800-0xa8ff]
[ 0.179373] pci 0000:02:0b.0: supports D2
[ 0.179378] pci 0000:02:0b.0: PME# supported from D2 D3hot D3cold
[ 0.179385] pci 0000:02:0b.0: PME# disabled
[ 0.179423] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.179431] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.179439] pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfa0fffff]
[ 0.179447] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.179453] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.179471] pci_bus 0000:00: on NUMA node 0
[ 0.179478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.179651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.180062] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.191141] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.191248] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 0.191368] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.191480] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.191584] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.191693] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.191800] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.191910] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.192246] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.192256] vgaarb: loaded
[ 0.192259] vgaarb: bridge control possible 0000:01:00.0
[ 0.192527] i2c-core: driver [aat2870] using legacy suspend method
[ 0.192531] i2c-core: driver [aat2870] using legacy resume method
[ 0.192709] SCSI subsystem initialized
[ 0.192809] libata version 3.00 loaded.
[ 0.192917] usbcore: registered new interface driver usbfs
[ 0.192943] usbcore: registered new interface driver hub
[ 0.193003] usbcore: registered new device driver usb
[ 0.193196] PCI: Using ACPI for IRQ routing
[ 0.193204] PCI: pci_cache_line_size set to 64 bytes
[ 0.193323] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.193329] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
[ 0.193545] NetLabel: Initializing
[ 0.193549] NetLabel: domain hash size = 128
[ 0.193552] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.193575] NetLabel: unlabeled traffic allowed by default
[ 0.193756] hpet clockevent registered
[ 0.193762] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.193770] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.193780] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.196113] Switching to clocksource hpet
[ 0.214250] AppArmor: AppArmor Filesystem Enabled
[ 0.214302] pnp: PnP ACPI init
[ 0.214337] ACPI: bus type pnp registered
[ 0.214521] pnp 00:00: [bus 00-ff]
[ 0.214528] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.214534] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.214540] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.214545] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.214550] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.214556] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[ 0.214659] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.214709] pnp 00:01: [io 0x0010-0x001f]
[ 0.214714] pnp 00:01: [io 0x0022-0x003f]
[ 0.214719] pnp 00:01: [io 0x0044-0x005f]
[ 0.214723] pnp 00:01: [io 0x0062-0x0063]
[ 0.214728] pnp 00:01: [io 0x0065-0x006f]
[ 0.214732] pnp 00:01: [io 0x0074-0x007f]
[ 0.214737] pnp 00:01: [io 0x0091-0x0093]
[ 0.214741] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.214745] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.214750] pnp 00:01: [io 0x0b78-0x0b7b]
[ 0.214755] pnp 00:01: [io 0x0f78-0x0f7b]
[ 0.214759] pnp 00:01: [io 0x0a78-0x0a7b]
[ 0.214763] pnp 00:01: [io 0x0e78-0x0e7b]
[ 0.214768] pnp 00:01: [io 0x0bbc-0x0bbf]
[ 0.214772] pnp 00:01: [io 0x0fbc-0x0fbf]
[ 0.214777] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.214781] pnp 00:01: [io 0x0294-0x0297]
[ 0.214901] system 00:01: [io 0x0b78-0x0b7b] has been reserved
[ 0.214908] system 00:01: [io 0x0f78-0x0f7b] has been reserved
[ 0.214913] system 00:01: [io 0x0a78-0x0a7b] has been reserved
[ 0.214919] system 00:01: [io 0x0e78-0x0e7b] has been reserved
[ 0.214925] system 00:01: [io 0x0bbc-0x0bbf] has been reserved
[ 0.214931] system 00:01: [io 0x0fbc-0x0fbf] has been reserved
[ 0.214938] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.214945] system 00:01: [io 0x0294-0x0297] has been reserved
[ 0.214953] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.214981] pnp 00:02: [dma 4]
[ 0.214986] pnp 00:02: [io 0x0000-0x000f]
[ 0.214990] pnp 00:02: [io 0x0080-0x0090]
[ 0.214995] pnp 00:02: [io 0x0094-0x009f]
[ 0.214999] pnp 00:02: [io 0x00c0-0x00df]
[ 0.215057] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.215083] pnp 00:03: [io 0x0070-0x0073]
[ 0.215100] pnp 00:03: [irq 8]
[ 0.215157] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.215177] pnp 00:04: [io 0x0061]
[ 0.215234] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.215255] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.215264] pnp 00:05: [irq 13]
[ 0.215329] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.215545] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.215551] pnp 00:06: [io 0x03f7]
[ 0.215560] pnp 00:06: [irq 6]
[ 0.215565] pnp 00:06: [dma 2]
[ 0.215661] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.215947] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.215957] pnp 00:07: [irq 4]
[ 0.216140] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.216459] pnp 00:08: [io 0x02f8-0x02ff]
[ 0.216469] pnp 00:08: [irq 3]
[ 0.216594] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.217204] pnp 00:09: [io 0x0378-0x037f]
[ 0.217210] pnp 00:09: [io 0x0778-0x077b]
[ 0.217219] pnp 00:09: [irq 7]
[ 0.217225] pnp 00:09: [dma 3]
[ 0.217352] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.217430] pnp 00:0a: [io 0x0060]
[ 0.217435] pnp 00:0a: [io 0x0064]
[ 0.217444] pnp 00:0a: [irq 1]
[ 0.217514] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.217873] pnp 00:0b: [io 0x0201-0x0207]
[ 0.217878] pnp 00:0b: [io 0x0200]
[ 0.217963] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.218244] pnp 00:0c: [io 0x0330-0x0331]
[ 0.218254] pnp 00:0c: [irq 10]
[ 0.218361] pnp 00:0c: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.218401] pnp 00:0d: [io 0x0400-0x04bf]
[ 0.218513] system 00:0d: [io 0x0400-0x04bf] has been reserved
[ 0.218521] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.218560] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
[ 0.218632] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.219232] pnp 00:0f: [mem 0x000cf000-0x000cffff]
[ 0.219238] pnp 00:0f: [mem 0x000f0000-0x000f7fff]
[ 0.219243] pnp 00:0f: [mem 0x000f8000-0x000fbfff]
[ 0.219247] pnp 00:0f: [mem 0x000fc000-0x000fffff]
[ 0.219252] pnp 00:0f: [mem 0x3fff0000-0x3fffffff]
[ 0.219257] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.219262] pnp 00:0f: [mem 0x00100000-0x3ffeffff]
[ 0.219267] pnp 00:0f: [mem 0xfec00000-0xfec00fff]
[ 0.219272] pnp 00:0f: [mem 0xfec01000-0xfed8ffff]
[ 0.219276] pnp 00:0f: [mem 0xfee00000-0xfee00fff]
[ 0.219281] pnp 00:0f: [mem 0xffb00000-0xffb7ffff]
[ 0.219286] pnp 00:0f: [mem 0xfff00000-0xffffffff]
[ 0.219291] pnp 00:0f: [mem 0x000e0000-0x000effff]
[ 0.219433] system 00:0f: [mem 0x000cf000-0x000cffff] has been reserved
[ 0.219440] system 00:0f: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.219446] system 00:0f: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.219453] system 00:0f: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.219459] system 00:0f: [mem 0x3fff0000-0x3fffffff] could not be reserved
[ 0.219465] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.219472] system 00:0f: [mem 0x00100000-0x3ffeffff] could not be reserved
[ 0.219479] system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.219487] system 00:0f: [mem 0xfec01000-0xfed8ffff] could not be reserved
[ 0.219494] system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.219501] system 00:0f: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.219508] system 00:0f: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.219515] system 00:0f: [mem 0x000e0000-0x000effff] has been reserved
[ 0.219522] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.219542] pnp: PnP ACPI: found 16 devices
[ 0.219546] ACPI: ACPI bus type pnp unregistered
[ 0.219554] PnPBIOS: Disabled by ACPI PNP
[ 0.258253] PCI: max bus depth: 1 pci_try_num: 2
[ 0.258287] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
[ 0.258298] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
[ 0.258307] pci 0000:01:00.0: BAR 6: assigned [mem 0xf9000000-0xf901ffff pref]
[ 0.258313] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.258321] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.258328] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.258339] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.258345] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.258354] pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfa0fffff]
[ 0.258382] pci 0000:00:1e.0: setting latency timer to 64
[ 0.258390] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.258395] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.258401] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.258406] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[ 0.258412] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.258417] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfa0fffff]
[ 0.258422] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.258427] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.258507] NET: Registered protocol family 2
[ 0.258638] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.259114] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.259844] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.260364] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.260370] TCP reno registered
[ 0.260377] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.260395] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.260574] NET: Registered protocol family 1
[ 0.260646] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.260668] pci 0000:00:1d.0: PCI INT A disabled
[ 0.260689] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.260709] pci 0000:00:1d.1: PCI INT B disabled
[ 0.260730] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.260749] pci 0000:00:1d.2: PCI INT C disabled
[ 0.260763] pci 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.260783] pci 0000:00:1d.3: PCI INT A disabled
[ 0.260807] pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.260860] pci 0000:00:1d.7: PCI INT D disabled
[ 0.260901] pci 0000:01:00.0: Boot video device
[ 0.260918] PCI: CLS 32 bytes, default 64
[ 0.261538] audit: initializing netlink socket (disabled)
[ 0.261554] type=2000 audit(1343655047.260:1): initialized
[ 0.299291] highmem bounce pool size: 64 pages
[ 0.299303] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.310228] VFS: Disk quotas dquot_6.5.2
[ 0.310361] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.311570] fuse init (API version 7.17)
[ 0.311776] msgmni has been set to 1710
[ 0.312496] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.312551] io scheduler noop registered
[ 0.312556] io scheduler deadline registered
[ 0.312571] io scheduler cfq registered (default)
[ 0.312877] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.312930] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.313248] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.313259] ACPI: Power Button [PWRB]
[ 0.313378] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.313386] ACPI: Power Button [PWRF]
[ 0.313486] ACPI: Fan [FAN] (on)
[ 0.316879] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.316885] ACPI: Thermal Zone [THRM] (74 C)
[ 0.316972] ERST: Table is not found!
[ 0.316976] GHES: HEST is not enabled!
[ 0.317197] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.324189] isapnp: Scanning for PnP cards...
[ 0.337539] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.400531] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.678335] isapnp: No Plug & Play device found
[ 0.689751] Freeing initrd memory: 13824k freed
[ 0.760514] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.796350] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.808345] Linux agpgart interface v0.103
[ 0.808567] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 0.813587] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 0.816065] brd: module loaded
[ 0.817311] loop: module loaded
[ 0.817571] ata_piix 0000:00:1f.1: version 2.13
[ 0.817590] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.817650] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.818171] scsi0 : ata_piix
[ 0.818315] scsi1 : ata_piix
[ 0.819107] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.819112] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.819162] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.819172] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.819239] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.819654] scsi2 : ata_piix
[ 0.819781] scsi3 : ata_piix
[ 0.820360] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xc400 bmdma 0xd000 irq 18
[ 0.820364] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xcc00 bmdma 0xd008 irq 18
[ 0.821049] Fixed MDIO Bus: probed
[ 0.821083] tun: Universal TUN/TAP device driver, 1.6
[ 0.821086] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.821219] PPP generic driver version 2.4.2
[ 0.821418] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.821444] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.821470] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.821475] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.821559] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.825478] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.825501] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa100000
[ 0.840023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.840246] hub 1-0:1.0: USB hub found
[ 0.840253] hub 1-0:1.0: 8 ports detected
[ 0.840381] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.840403] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.840433] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.840444] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.840448] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.840532] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.840568] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bc00
[ 0.840766] hub 2-0:1.0: USB hub found
[ 0.840773] hub 2-0:1.0: 2 ports detected
[ 0.840869] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.840879] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.840883] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.840958] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.840993] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
[ 0.841195] hub 3-0:1.0: USB hub found
[ 0.841201] hub 3-0:1.0: 2 ports detected
[ 0.841292] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.841302] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.841306] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.841385] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.841410] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[ 0.841603] hub 4-0:1.0: USB hub found
[ 0.841609] hub 4-0:1.0: 2 ports detected
[ 0.841700] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.841712] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.841716] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.841793] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.841817] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
[ 0.842021] hub 5-0:1.0: USB hub found
[ 0.842027] hub 5-0:1.0: 2 ports detected
[ 0.842192] usbcore: registered new interface driver libusual
[ 0.842266] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.842269] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.842842] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.843035] mousedev: PS/2 mouse device common for all mice
[ 0.843283] rtc_cmos 00:03: RTC can wake from S4
[ 0.843416] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.843442] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.843535] device-mapper: uevent: version 1.0.3
[ 0.843658] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.843712] EISA: Probing bus 0 at eisa.0
[ 0.843752] EISA: Detected 0 cards.
[ 0.843765] cpufreq-nforce2: No nForce2 chipset.
[ 0.843769] cpuidle: using governor ladder
[ 0.843772] cpuidle: using governor menu
[ 0.843775] EFI Variables Facility v0.08 2004-May-17
[ 0.844194] TCP cubic registered
[ 0.844373] NET: Registered protocol family 10
[ 0.845270] NET: Registered protocol family 17
[ 0.845277] Registering the dns_resolver key type
[ 0.845303] Using IPI No-Shortcut mode
[ 0.845500] PM: Hibernation image not present or could not be loaded.
[ 0.845522] registered taskstats version 1
[ 0.858922] Magic number: 4:118:535
[ 0.858951] bdi 1:13: hash matches
[ 0.858962] tty ttyS15: hash matches
[ 0.859036] rtc_cmos 00:03: setting system clock to 2012-07-30 13:30:48 UTC (1343655048)
[ 0.859064] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.859068] EDD information not available.
[ 0.864282] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.987108] ata2.01: ATAPI: VOM-12E48X, VER-100A, max UDMA/33
[ 1.000165] ata2.01: configured for UDMA/33
[ 1.044416] ata1.00: ATA-6: WDC WD800JB-00JJA0, 05.01C05, max UDMA/100
[ 1.044421] ata1.00: 156301488 sectors, multi 16: LBA
[ 1.044726] ata1.01: ATA-6: ST380011A, 8.01, max UDMA/100
[ 1.044731] ata1.01: 156301488 sectors, multi 16: LBA48
[ 1.052283] ata1.00: configured for UDMA/100
[ 1.068359] ata1.01: configured for UDMA/100
[ 1.068550] scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00JJ 05.0 PQ: 0 ANSI: 5
[ 1.068764] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.068837] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.068890] sd 0:0:0:0: [sda] Write Protect is off
[ 1.068897] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.068951] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.069100] scsi 0:0:1:0: Direct-Access ATA ST380011A 8.01 PQ: 0 ANSI: 5
[ 1.069336] sd 0:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.069473] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.069479] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.069484] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.069539] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.070222] scsi 1:0:1:0: CD-ROM VOM-12E48X 100A PQ: 0 ANSI: 5
[ 1.072128] sr0: scsi3-mmc drive: 1x/1x writer cd/rw xa/form2 cdda tray
[ 1.072133] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.072312] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 1.072485] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 1.096232] sda: sda1 sda2
[ 1.122630] sdb: sdb1 sdb2 < sdb5 sdb6 >
[ 1.122635] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.123269] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.123315] Freeing unused kernel memory: 740k freed
[ 1.123982] Write protecting the kernel text: 5816k
[ 1.124039] Write protecting the kernel read-only data: 2376k
[ 1.153389] udevd[93]: starting version 175
[ 1.260085] Refined TSC clocksource calibration: 3200.534 MHz.
[ 1.260098] Switching to clocksource tsc
[ 1.302584] Floppy drive(s): fd0 is 1.44M
[ 1.320512] FDC 0 is a post-1991 82077
[ 1.336056] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 1.342992] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.343043] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.344383] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.344456] 8139too 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.346072] 8139too 0000:02:01.0: eth0: RealTek RTL8139 at 0xa000, 00:01:29:f9:be:ac, IRQ 17
[ 1.583971] input: Microsoft Express Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
[ 1.584297] generic-usb 0003:045E:077A.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Express Mouse] on usb-0000:00:1d.0-2/input0
[ 1.584336] usbcore: registered new interface driver usbhid
[ 1.584341] usbhid: USB HID core driver
[ 1.972966] EXT4-fs (sdb6): INFO: recovery required on readonly filesystem
[ 1.972972] EXT4-fs (sdb6): write access will be enabled during recovery
[ 4.061463] EXT4-fs (sdb6): orphan cleanup on readonly fs
[ 4.061477] EXT4-fs (sdb6): ext4_orphan_cleanup: deleting unreferenced inode 130860
[ 4.061566] EXT4-fs (sdb6): 1 orphan inode deleted
[ 4.061570] EXT4-fs (sdb6): recovery complete
[ 4.366411] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[ 7.017362] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.148662] Adding 3905532k swap on /dev/sdb5. Priority:-1 extents:1 across:3905532k
[ 7.210341] udevd[392]: starting version 175
[ 8.255527] lp: driver loaded but no devices found
[ 8.452516] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[ 8.557886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.747698] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 890kHz
[ 8.784899] parport_pc 00:09: reported by Plug and Play ACPI
[ 8.785015] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 8.799187] wmi: Mapper loaded
[ 8.900817] lp0: using parport0 (interrupt-driven).
[ 9.099792] intel_rng: FWH not detected
[ 9.100716] ppdev: user-space parallel port driver
[ 9.161375] [drm] Initialized drm 1.1.0 20060810
[ 9.486634] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.491356] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x034200b1)
[ 9.491714] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 9.538193] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 9.538308] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 9.538312] [drm] nouveau 0000:01:00.0: BMP version 5.39
[ 9.538316] [drm] nouveau 0000:01:00.0: Bios version 04.34.20.27
[ 9.538320] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
[ 9.538324] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 000088b8
[ 9.538328] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 000088b8
[ 9.538332] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01010312 00000000
[ 9.538335] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000333
[ 9.538405] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[ 9.538410] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE5D9
[ 9.538445] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE7EA
[ 9.538454] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE930
[ 9.538489] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEAB6
[ 9.538494] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEAD3
[ 9.538499] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xEAF0
[ 9.567458] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xEC74
[ 9.591892] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 9.591900] [drm] nouveau 0000:01:00.0: 0: core 250MHz memory 400MHz timing 0 fanspeed 100%
[ 9.591910] [drm] nouveau 0000:01:00.0: c: core 249MHz memory 405MHz
[ 9.592168] [TTM] Zone kernel: Available graphics memory: 445048 kiB.
[ 9.592172] [TTM] Zone highmem: Available graphics memory: 512604 kiB.
[ 9.592175] [TTM] Initializing pool allocator.
[ 9.592194] [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM
[ 9.592926] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 9.592944] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
[ 9.592954] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 9.592998] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[ 9.593019] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
[ 9.597266] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 9.597271] [drm] No driver support for vblank timestamp query.
[ 9.597280] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 9.597285] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[ 9.597289] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[ 9.597294] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[ 9.619079] cfg80211: Calling CRDA to update world regulatory domain
[ 9.786181] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo f3288a00
[ 9.786330] fbcon: nouveaufb (fb0) is primary device
[ 9.786539] Console: switching to colour frame buffer device 160x64
[ 9.786604] fb0: nouveaufb frame buffer device
[ 9.786608] drm: registered panic notifier
[ 9.786625] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 10.919201] snd_intel8x0 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.919253] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 11.125607] ath9k 0000:02:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 11.244032] intel8x0_measure_ac97_clock: measured 52545 usecs (2532 samples)
[ 11.244038] intel8x0: clocking to 48000
[ 11.428889] ath: EEPROM regdomain: 0x809c
[ 11.428893] ath: EEPROM indicates we should expect a country code
[ 11.428896] ath: doing EEPROM country->regdmn map search
[ 11.428899] ath: country maps to regdmn code: 0x52
[ 11.428902] ath: Country alpha2 being used: CN
[ 11.428904] ath: Regpair used: 0x52
[ 11.428909] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 11.428913] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 11.428916] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 11.428920] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 11.428923] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 11.428927] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 11.428930] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 11.428933] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 11.428936] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 11.428940] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 11.428943] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 11.428947] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 11.428950] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 11.428954] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 11.428957] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 11.428961] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 11.428964] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 11.428967] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 11.428970] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 11.428974] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 11.428977] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 11.428981] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 11.428984] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 11.428987] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 11.428991] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 11.430139] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430146] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 11.430151] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430156] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 11.430161] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430166] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 11.430171] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430176] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 11.430181] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430187] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 11.430192] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430197] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 11.430202] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430207] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 11.430212] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430218] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 11.430223] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430229] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 11.430234] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430239] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 11.430244] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430250] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 11.430255] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430260] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 11.430265] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430271] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 11.430276] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 11.430282] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 11.561826] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 11.563150] Registered led device: ath9k-phy0
[ 11.563160] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xf8860000, irq=18
[ 11.563488] cfg80211: Pending regulatory request, waiting for it to be processed...
[ 12.179602] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179609] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179612] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179616] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179619] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179623] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179626] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179630] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179633] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179637] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179640] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179644] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179647] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179651] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179654] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179657] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179661] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179664] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179667] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179671] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179674] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179678] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179681] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179685] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.179688] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179692] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.179695] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 12.179699] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.179705] cfg80211: World regulatory domain updated:
[ 12.179707] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.179711] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179715] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.179718] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.179722] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179725] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.179745] cfg80211: Calling CRDA for country: CN
[ 12.187317] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 12.187323] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 12.187327] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 12.187331] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 12.187334] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 12.187338] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 12.187341] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 12.187345] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 12.187348] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 12.187352] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 12.187355] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 12.187359] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 12.187362] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 12.187366] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 12.187369] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 12.187373] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 12.187376] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 12.187380] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 12.187383] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 12.187387] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 12.187390] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 12.187394] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 12.187397] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 12.187401] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 12.187404] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 12.187408] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 12.187411] cfg80211: Disabling freq 2484 MHz
[ 12.187416] cfg80211: Regulatory domain changed to country: CN
[ 12.187419] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.187423] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.187426] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 14.075723] type=1400 audit(1343644261.709:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=667 comm="apparmor_parser"
[ 14.075989] type=1400 audit(1343644261.709:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=667 comm="apparmor_parser"
[ 14.076198] type=1400 audit(1343644261.713:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=667 comm="apparmor_parser"
[ 14.301217] type=1400 audit(1343644261.937:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=597 comm="apparmor_parser"
[ 14.301511] type=1400 audit(1343644261.937:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=597 comm="apparmor_parser"
[ 14.301681] type=1400 audit(1343644261.937:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=597 comm="apparmor_parser"
[ 14.407727] type=1400 audit(1343644262.041:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=598 comm="apparmor_parser"
[ 14.407939] type=1400 audit(1343644262.041:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=598 comm="apparmor_parser"
[ 14.408125] type=1400 audit(1343644262.045:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=598 comm="apparmor_parser"
[ 16.370981] Bluetooth: Core ver 2.16
[ 16.371025] NET: Registered protocol family 31
[ 16.371030] Bluetooth: HCI device and connection manager initialized
[ 16.371036] Bluetooth: HCI socket layer initialized
[ 16.371040] Bluetooth: L2CAP socket layer initialized
[ 16.371054] Bluetooth: SCO socket layer initialized
[ 16.424349] Bluetooth: RFCOMM TTY layer initialized
[ 16.424371] Bluetooth: RFCOMM socket layer initialized
[ 16.424376] Bluetooth: RFCOMM ver 1.11
[ 16.493975] init: failsafe main process (717) killed by TERM signal
[ 16.521899] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.521906] Bluetooth: BNEP filters: protocol multicast
[ 16.896853] type=1400 audit(1343644264.533:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=771 comm="apparmor_parser"
[ 18.464522] 8139too 0000:02:01.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 18.601730] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.455416] audit_printk_skb: 15 callbacks suppressed
[ 21.455423] type=1400 audit(1343644269.089:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=853 comm="apparmor_parser"
[ 21.456855] type=1400 audit(1343644269.093:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=853 comm="apparmor_parser"
[ 22.986170] type=1400 audit(1343644270.621:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=934 comm="apparmor_parser"
[ 22.987091] type=1400 audit(1343644270.621:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=934 comm="apparmor_parser"
[ 23.566547] type=1400 audit(1343644271.201:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=936 comm="apparmor_parser"
[ 28.848015] eth0: no IPv6 routers present
[ 31.307383] type=1400 audit(1343644278.319:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=849 comm="apparmor_parser"
[ 31.309479] type=1400 audit(1343644278.323:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=849 comm="apparmor_parser"
[ 31.310188] type=1400 audit(1343644278.323:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=849 comm="apparmor_parser"
[ 31.311770] type=1400 audit(1343644278.323:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=849 comm="apparmor_parser"
[ 31.313473] type=1400 audit(1343644278.327:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=849 comm="apparmor_parser"
[ 31.314174] type=1400 audit(1343644278.327:27): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=849 comm="apparmor_parser"
[ 31.315312] type=1400 audit(1343644278.327:28): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=849 comm="apparmor_parser"
[ 31.316469] type=1400 audit(1343644278.331:29): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=849 comm="apparmor_parser"
[ 34.523967] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 34.523974] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[ 73.343162] type=1400 audit(1343644320.355:30): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1927 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0


ευχαριστώ και πάλι και ελπίζω τελικά να βρούμε λύση.

[the_eye]

Μήπως δεν κολλάει από την κάρτα αλλά λόγο κάποιας ιστοσελίδας που έχει κάποιο βαρύ flash video/ game ;
Δοκίμασε να δεις σελίδες που να μην έχουν flash, πχ το forum αυτό και δες αν θα κολλήσει.

[cdmc]

Φίλε the_eye κολλάει ακόμα και αν δεν μπώ σε καμία σελίδα.

[Learner]

Βλέπω στο dmesg πιθανό πρόβλημα στο σύστημα αρχείων .

Κώδικας: Επιλογή όλων

ext4-fs (sdb6): INFO: recovery required on readonly filesystem
[ 1.972972] ext4-fs (sdb6): write access will be enabled during recovery
[ 4.061463] ext4-fs (sdb6): orphan cleanup on readonly fs
[ 4.061477] ext4-fs (sdb6): ext4_orphan_cleanup: deleting unreferenced inode 130860
[ 4.061566] ext4-fs (sdb6): 1 orphan inode deleted
[ 4.061570] ext4-fs (sdb6): recovery complete
[ 4.366411] ext4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)

Εκεί έχεις το Ubuntu ; στο /dev/sdb6 ;

Δώσε το αποτέλεσμα της εντολής

Κώδικας: Επιλογή όλων

sudo fdisk -l

Και αν θες , τρέξε και ένα τεστ και δώσε τα αποτελέσματα --> http://forum.ubuntu-gr.org/viewtopic.ph ... tp#p202359

[modenas88]

Με αυτό το dmesg δεν βλέπω κάτι σχετικό. Ίσως να εμφανιστεί κάποιο σφάλμα τη στιγμή που κολλήσει.

Για δοκίμασε όταν κολλήσει να πατήσεις τον συνδυασμό των πλήκτρων Ctrl+Alt-F1 για να μπεις σε εικονική κονσόλα Linux (σαν τερματικό). Εκεί, αν μπεις, συνδέσου με τα στοιχεία σου (username + pass) και εκτέλεσε τις εντολές

Κώδικας: Επιλογή όλων

dmesg > dmesg.txt
cp /var/log/Xorg.0.log .

για να πάρουμε τότε στοιχεία. Εδώ ανέβασε τα αρχεία κειμένου που θα δημιουργηθούν στον προσωπικό σου φάκελο, τα dmesg.txt και Xorg.0.log

Αν και με αυτά δεν εμφανιστεί τίποτα θα δοκιμάσουμε να εγκαταστήσουμε νεότερο πυρήνα Linux.

Off topic:
@Learner Το τεστ που προτείνεις δεν ελέγχει το filesystem (software), αλλά το σκληρό δίσκο (hardware). Οπότε προτείνω στον @cdmc να κάνει τουλάχιστο και έναν έλεγχο και για αυτό. Για γίνει αυτό εκτελούμε την εντολή:

Κώδικας: Επιλογή όλων

sudo touch /forcefsck
sudo reboot

και κάνουμε μια επανεκκίνηση.
[αυτός ο έλεγχος θα μπορούσε να γίνει πολύ εύκολα και από γραφικό (Εργαλείο δίσκων), αλλά θα χρειάζονταν να εκκινήσουμε με ένα LiveUSB με Ubuntu]

μόνο με reset φεύγει απο την κατάσταση αυτή

Αντί για hard reset (από το κουμπί) που πρέπει να χρησιμοποιείται μόνο όταν δεν έχουμε καμία άλλη επιλογή και είναι λιγάκι επικίνδυνο, χρησιμοποίησε τους παρακάτω συνδυασμούς πλήκτρων (για επανεκκίνηση):
1. Ctrl+Alt+F1 και στην συνέχεια Ctrl+Alt+Del ... ή αν δε γίνει κάτι
2. Alt+PrtScr/SysReq+REISUB (το PrtScr/SysReq είναι ένα πλήκτρο ενώ τα REISUB είναι έξι διαφορετικά)

Αν δεν λειτουργήσουν, τότε αναγκαστηκά hard reset.