To laptop δεν συνδέεται ασύρματα.

[dim459]

Aπό σήμερα το πρωί μέχρι τώρα, εγκατέστησα σε ένα χώρο του δίσκου win xp, μήπως καταφέρω τίποτα.
Αλλά αυτό ακριβώς κατάφερα ΤΙΠΟΤΑ μια από τα ίδια με lubuntu.

Επειδή δεν είμαι σίγουρος αν το έχω πιάσει σωστά, το τίποτα αναφέρεται στη δυνατότητα να φλασάρεις το firmware, ή και στη δυνατότητα σύνδεσης μέ wpa μέσω των xp ;
Eν τάχει αυτό που θέλω να πω είναι ότι αν επιτυγχάνεις σύνδεση με το κλειδωμένο δίκτυο με τον driver των χρ, τότε δοκίμασε με το ndiswrapper. Εννοείται ότι στο προτείνω μόνο και μόνο επειδή ούτως ή άλλως πας για φορμάτ, αφού δε μου αρέσει καθόλου η ιδέα του ndiswrapper.
Αν πάλι δε συνδέεται ούτε με τα xp (όπως φαντάζομαι) τότε αγνόησε τα παραπάνω.

[sotos21]

Επειδή δεν είμαι σίγουρος αν το έχω πιάσει σωστά, το τίποτα αναφέρεται στη δυνατότητα να φλασάρεις το firmware, ή και στη δυνατότητα σύνδεσης μέ wpa μέσω των xp

Αναφέρομαι και στα δύο.
Δοκιμάζω πρώτα με 10.04.

[sotos21]

Κώδικας: Επιλογή όλων

konstantinos@konstantinos-laptop:~$ lspci -k -d 1260:3873
00:09.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
Kernel driver in use: orinoco_pci
Kernel modules: hostap_pci, orinoco_pci
konstantinos@konstantinos-laptop:~$

Καλά τα λέει η έξοδος της εντολής αλλά ασύρματο δεν έχει.
Δοκίμασα το orinoco σε 10.04 και προχωράω με φλασάρισμα.

[modenas88]

Καλά τα λέει η έξοδος της εντολής αλλά ασύρματο δεν έχει.

Εννοείς δεν βλέπει καθόλου δίκτυα ή δεν συνδέεται με wpa;

Το πρότυπο WPA ξεκίνησε να χρησιμοποιείται το 2003, τις ίδιες χρονολογίες που παίρνεις τα firmware από το σύνδεσμο. Λογικά μετά από κάποιο από αυτά (1.7.4) δίνει τη δυνατότητα στην κάρτα για υποστήριξη WPA, ανεξαρτήτως λειτουργικού. Οπότε λογικά είτε Ubuntu (με όποιον οδηγό) είτε εξπι θα βάλεις, αν θες WPA, θα πρέπει να αναβαθμίσεις το firmware. Βάλε όσο πιο πρόσφατο μπορείς.

[sotos21]

Εννοείς δεν βλέπει καθόλου δίκτυα ή δεν συνδέεται με wpa;

Εννοώ δεν συνδέεται με wpa.
Το απόγευμα θα ασχοληθώ.

[sotos21]

Συνδυάζοντας ότι μου είπατε παίρνω καινούργια σφάλματα

Κώδικας: Επιλογή όλων

root@konstantinos-laptop:/home/konstantinos/Λήψεις/Latest-prism/secondary-FLASH#
prism2_srec -v wlan0 p40003c0.hex su010804.hex
S3 CRC-16 generation record: start=0x003F17FE len=2 prog=0
S3 CRC-16 generation record: start=0x003FE400 len=2046 prog=1
S3 CRC-16 generation record: start=0x003F0800 len=3924 prog=1
Start address 0x00000000
srec summary for p40003c0.hex
Component: 0x0015 0.3.0 (primary firmware)
Supported platforms:
0x8008 1.0.0
Interface compatibility information:
role=Supplier variant=0 range=1-2 iface=Primary Firmware-Driver (3)
role=Actor variant=1 range=1-1 iface=Controller-Firmware (2)
Separate S3 data areas:
S3 area count: 5
addr=0x003E0000..0x003E0049 (len=74)
addr=0x003F0800..0x003F1753 (len=3924)
addr=0x003F17FE..0x003F17FF (len=2)
addr=0x003FE400..0x003FE67D (len=638)
addr=0x003FEBFC..0x003FEBFD (len=2)
Total data length: 4640
Start address 0x00000000

S3 CRC-16 generation record: start=0x007E3000 len=59340 prog=1
Start address 0x00000000
srec summary for su010804.hex
Component: 0x001f 1.8.4 (station firmware)
Supported platforms:
0x800a 1.0.0, 0x800f 1.0.0, 0x8010 1.0.0, 0x8011 1.0.0, 0x801e 1.0.0
0x801f 1.0.0, 0x8020 1.0.0, 0x8025 1.0.0, 0x8026 1.0.0, 0x8027 1.0.0
Interface compatibility information:
role=Supplier variant=4 range=1-15 iface=Station Firmware-Driver (4)
role=Actor variant=1 range=1-1 iface=Modem-Firmware (1)
role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
role=Actor variant=1 range=1-2 iface=Primary Firmware-Driver (3)
Separate S3 data areas:
S3 area count: 5
addr=0x007E3000..0x007EFC2B (len=52268)
addr=0x007EFC8C..0x007EFE2B (len=416)
addr=0x007EFE3C..0x007EFE4B (len=16)
addr=0x007F0800..0x007F17CB (len=4044)
addr=0x007FE000..0x007FECD7 (len=3288)
Total data length: 60032
Start address 0x00000000

ioctl[PRISM2_IOCTL_HOSTAPD]: No such device
Missing wlan component info
Could not read wlan RIDs
root@konstantinos-laptop:/home/konstantinos/Λήψεις/Latest-prism/secondary-FLASH#



[Learner]

Προσπάθησε και με wifi0 .

Επίσης καλό θα ήταν (νομίζω) να πάρεις το primary και το station από τον ίδιο φάκελο . Δηλδ.. 1.7.4 --> http://linux.junsun.net/intersil-prism/firmware/1.7.4/

[sotos21]

Κώδικας: Επιλογή όλων

konstantinos@konstantinos-laptop:~/Λήψεις$ prism2_srec -v wlan0 pm010102.hex sf010704.hex
Special S3 firmware info record - name 'PM010102.HEX'
Start address 0x003f0000
S3 CRC-16 generation record: start=0x007E17FE len=2 prog=0
srec summary for pm010102.hex
Included file name: PM010102.HEX
Component: 0x0015 1.1.2 (primary firmware)
Supported platforms:
0x800e 1.0.0, 0x8015 1.0.0, 0x8019 1.0.0, 0x801d 1.0.0, 0x8024 1.0.0
Interface compatibility information:
role=Supplier variant=2 range=4-4 iface=Primary Firmware-Driver (3)
role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
Separate S3 data areas:
S3 area count: 3
addr=0x007E0000..0x007E092F (len=2352)
addr=0x007E0A00..0x007E13D7 (len=2520)
addr=0x007E17FE..0x007E17FF (len=2)
Total data length: 4874
Start address 0x003f0000

S3 CRC-16 generation record: start=0x007E1800 len=65414 prog=1
Start address 0x00000000
srec summary for sf010704.hex
Component: 0x001f 1.7.4 (station firmware)
Supported platforms:
0x800a 1.0.0, 0x800b 1.0.0, 0x800c 1.0.0, 0x800d 1.0.0, 0x8012 1.0.0
0x8013 1.0.0, 0x8014 1.0.0, 0x8016 1.0.0, 0x8017 1.0.0, 0x8018 1.0.0
0x801a 1.0.0, 0x801b 1.0.0, 0x801c 1.0.0, 0x8021 1.0.0, 0x8022 1.0.0
0x8023 1.0.0
Interface compatibility information:
role=Supplier variant=4 range=1-12 iface=Station Firmware-Driver (4)
role=Actor variant=1 range=1-1 iface=Modem-Firmware (1)
role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
role=Actor variant=1 range=4-4 iface=Primary Firmware-Driver (3)
Separate S3 data areas:
S3 area count: 3
addr=0x007E1800..0x007EE2DB (len=51932)
addr=0x007F0800..0x007F1785 (len=3974)
addr=0x007FE000..0x007FECC5 (len=3270)
Total data length: 59176
Start address 0x00000000

Cannot combine volatile and non-volatile images.
konstantinos@konstantinos-laptop:~/Λήψεις$

Τουλάχιστον έχω ποικιλία σφαλμάτων

[sotos21]

Κώδικας: Επιλογή όλων

root@konstantinos-laptop:/home/konstantinos/Λήψεις/Latest-prism/secondary-RAM# prism2_srec -v wlan0 ak010104.hex rf010804.hex
Special S3 firmware info record - name 'AK010104.HEX'
Start address 0x003f0000
S3 CRC-16 generation record: start=0x007E17FE len=2 prog=0
srec summary for ak010104.hex
Included file name: AK010104.HEX
Component: 0x0015 1.1.4 (primary firmware)
Supported platforms:
0x800c 1.0.0, 0x8013 1.0.0, 0x8017 1.0.0, 0x801b 1.0.0, 0x8022 1.0.0
Interface compatibility information:
role=Supplier variant=4 range=4-5 iface=Primary Firmware-Driver (3)
role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
Separate S3 data areas:
S3 area count: 3
addr=0x007E0000..0x007E0A1D (len=2590)
addr=0x007E0B00..0x007E13DB (len=2268)
addr=0x007E17FE..0x007E17FF (len=2)
Total data length: 4860
Start address 0x003f0000

S3 CRC-16 generation record: start=0x007E1800 len=65536 prog=1
Special S3 firmware info record - name 'rf010804.hex'
Start address 0x003f0c01
srec summary for rf010804.hex
Included file name: rf010804.hex
Component: 0x001f 1.8.4 (station firmware)
Supported platforms:
0x800a 1.0.0, 0x800b 1.0.0, 0x800c 1.0.0, 0x800d 1.0.0, 0x8012 1.0.0
0x8013 1.0.0, 0x8014 1.0.0, 0x8016 1.0.0, 0x8017 1.0.0, 0x8018 1.0.0
0x801a 1.0.0, 0x801b 1.0.0, 0x801c 1.0.0, 0x8021 1.0.0, 0x8022 1.0.0
0x8023 1.0.0, 0x800a 1.0.0, 0x800e 1.0.0, 0x8015 1.0.0, 0x8019 1.0.0
0x801d 1.0.0, 0x8024 1.0.0
Interface compatibility information:
role=Supplier variant=4 range=1-15 iface=Station Firmware-Driver (4)
role=Actor variant=1 range=1-1 iface=Modem-Firmware (1)
role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
role=Actor variant=1 range=4-4 iface=Primary Firmware-Driver (3)
Separate S3 data areas:
S3 area count: 3
addr=0x007E1800..0x007EEAAB (len=53932)
addr=0x007F0800..0x007F17FF (len=4096)
addr=0x007FE000..0x007FECD1 (len=3282)
Total data length: 61310
Start address 0x003f0c01

Overriding component id and supplied range data using PDA.
Wireless LAN card information:
Components:
NICID: 0x8013 v1.0.0
PRIID: 0x0015 v1.1.0
STAID: 0x001f v1.4.9
Interface compatibility information:
PRI role=Supplier variant=1 range=1-1 iface=Modem-Firmware (1)
PRI role=Supplier variant=2 range=1-1 iface=Controller-Firmware (2)
PRI role=Supplier variant=1 range=4-4 iface=Primary Firmware-Driver (3)
STA role=Supplier variant=1 range=1-9 iface=Station Firmware-Driver (4)
PRI role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
STA role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
STA role=Actor variant=1 range=1-1 iface=Modem-Firmware (1)

Verifying update compatibility and combining data:
Plugging PDR 0x0003 at 0x007e1374 (len=12)
Plugging PDR 0x0005 at 0x007e11cc (len=2)
PDR 0x0005 not found from wlan card PDA. Using default data.
len=2: 00 01
Plugging PDR 0x0006 at 0x007e13ac (len=10)
Plugging PDR 0x0007 at 0x007e13c0 (len=10)
Plugging PDR 0x0008 at 0x007e1380 (len=8)
Plugging PDR 0x0400 at 0x007e11d0 (len=2)
Plugging PDR 0x0402 at 0x007e11da (len=4)
Plugging PDR 0x0403 at 0x007e11d2 (len=16)
Plugging PDR 0x0404 at 0x007e11e2 (len=10)
Plugging PDR 0x0408 at 0x007e11ce (len=2)
PDR 0x0408 not found from wlan card PDA. Using default data.
len=2: 64 00
Plugging PDR 0x0001 at 0x007e1388 (len=16)
Plug record length mismatch (PDR=0x0001): 12 != 16
==> extend from default
PRI: old iface 1:4-4 new iface 4:4-5
Plugging PDR 0xffffffff at 0x007ee5d0 (len=14)
Plugging PDR 0x0103 at 0x007ee592 (len=12)
Plugging PDR 0x0104 at 0x007ee6ca (len=2)
Plugging PDR 0x0105 at 0x007ee700 (len=2)
Plugging PDR 0x0107 at 0x007ee5a0 (len=2)
Plugging PDR 0x0006 at 0x007ee56c (len=10)
Plugging PDR 0x0412 at 0x007ee720 (len=6)
PDR 0x0412 not found from wlan card PDA. Using default data.
len=6: 03 00 02 00 02 00
Plugging PDR 0x0414 at 0x007ee5aa (len=36)
PDR 0x0414 not found from wlan card PDA. Using default data.
len=36: 36 00 36 00 36 00 04 00 01 00 03 00 3b 00 3b 00 40 00 06 00 01 00 03 00 40 00 40 00 4a 00 08 00 01 00 03 00
Plugging PDR 0x0202 at 0x007f1250 (len=100)
Plugging PDR 0x0203 at 0x007f12b4 (len=128)
Plugging PDR 0x0204 at 0x007f1434 (len=80)
Plugging PDR 0x0405 at 0x007f1484 (len=4)
PDR 0x0405 not found from wlan card PDA. Using default data.
len=4: 00 00 00 30
Plugging PDR 0x0300 at 0x007f1488 (len=28)
Plugging PDR 0x0301 at 0x007f14a4 (len=34)
Plugging PDR 0x0101 at 0x007f16b0 (len=6)
Plugging PDR 0x0105 at 0x007f16bc (len=2)
Plugging PDR 0x0105 at 0x007f17bc (len=2)
Plugging PDR 0x0406 at 0x007f1750 (len=2)
PDR 0x0406 not found from wlan card PDA. Using default data.
len=2: 64 00
Plugging PDR 0x0302 at 0x007f14cc (len=2)
PDR 0x0302 not found from wlan card PDA. Using default data.
len=2: 12 00
Generating CRC-16 (start=0x007e1800, len=65536) at 0x007e17fe
Allowing S3 overlap due to CRC-16 signature at 0x007e17fe (was: ffff)
After srec file merge
S3 area count: 5
addr=0x007E0000..0x007E0A1D (len=2590)
addr=0x007E0B00..0x007E13DB (len=2268)
addr=0x007E17FE..0x007EEAAB (len=53934)
addr=0x007F0800..0x007F17FF (len=4096)
addr=0x007FE000..0x007FECD1 (len=3282)
Total data length: 66170
OK.

Κώδικας: Επιλογή όλων

root@konstantinos-laptop:/home/konstantinos/Λήψεις/Latest-prism/secondary-RAM# prism2_srec -v -f wlan0 ak010104.hex rf010804.hex
Special S3 firmware info record - name 'AK010104.HEX'
Start address 0x003f0000
S3 CRC-16 generation record: start=0x007E17FE len=2 prog=0
srec summary for ak010104.hex
Included file name: AK010104.HEX
Component: 0x0015 1.1.4 (primary firmware)
Supported platforms:
0x800c 1.0.0, 0x8013 1.0.0, 0x8017 1.0.0, 0x801b 1.0.0, 0x8022 1.0.0
Interface compatibility information:
role=Supplier variant=4 range=4-5 iface=Primary Firmware-Driver (3)
role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
Separate S3 data areas:
S3 area count: 3
addr=0x007E0000..0x007E0A1D (len=2590)
addr=0x007E0B00..0x007E13DB (len=2268)
addr=0x007E17FE..0x007E17FF (len=2)
Total data length: 4860
Start address 0x003f0000

S3 CRC-16 generation record: start=0x007E1800 len=65536 prog=1
Special S3 firmware info record - name 'rf010804.hex'
Start address 0x003f0c01
srec summary for rf010804.hex
Included file name: rf010804.hex
Component: 0x001f 1.8.4 (station firmware)
Supported platforms:
0x800a 1.0.0, 0x800b 1.0.0, 0x800c 1.0.0, 0x800d 1.0.0, 0x8012 1.0.0
0x8013 1.0.0, 0x8014 1.0.0, 0x8016 1.0.0, 0x8017 1.0.0, 0x8018 1.0.0
0x801a 1.0.0, 0x801b 1.0.0, 0x801c 1.0.0, 0x8021 1.0.0, 0x8022 1.0.0
0x8023 1.0.0, 0x800a 1.0.0, 0x800e 1.0.0, 0x8015 1.0.0, 0x8019 1.0.0
0x801d 1.0.0, 0x8024 1.0.0
Interface compatibility information:
role=Supplier variant=4 range=1-15 iface=Station Firmware-Driver (4)
role=Actor variant=1 range=1-1 iface=Modem-Firmware (1)
role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
role=Actor variant=1 range=4-4 iface=Primary Firmware-Driver (3)
Separate S3 data areas:
S3 area count: 3
addr=0x007E1800..0x007EEAAB (len=53932)
addr=0x007F0800..0x007F17FF (len=4096)
addr=0x007FE000..0x007FECD1 (len=3282)
Total data length: 61310
Start address 0x003f0c01

Overriding component id and supplied range data using PDA.
Wireless LAN card information:
Components:
NICID: 0x8013 v1.0.0
PRIID: 0x0015 v1.1.0
STAID: 0x001f v1.4.9
Interface compatibility information:
PRI role=Supplier variant=1 range=1-1 iface=Modem-Firmware (1)
PRI role=Supplier variant=2 range=1-1 iface=Controller-Firmware (2)
PRI role=Supplier variant=1 range=4-4 iface=Primary Firmware-Driver (3)
STA role=Supplier variant=1 range=1-9 iface=Station Firmware-Driver (4)
PRI role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
STA role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
STA role=Actor variant=1 range=1-1 iface=Modem-Firmware (1)

Verifying update compatibility and combining data:
Plugging PDR 0x0003 at 0x007e1374 (len=12)
Plugging PDR 0x0005 at 0x007e11cc (len=2)
PDR 0x0005 not found from wlan card PDA. Using default data.
len=2: 00 01
Plugging PDR 0x0006 at 0x007e13ac (len=10)
Plugging PDR 0x0007 at 0x007e13c0 (len=10)
Plugging PDR 0x0008 at 0x007e1380 (len=8)
Plugging PDR 0x0400 at 0x007e11d0 (len=2)
Plugging PDR 0x0402 at 0x007e11da (len=4)
Plugging PDR 0x0403 at 0x007e11d2 (len=16)
Plugging PDR 0x0404 at 0x007e11e2 (len=10)
Plugging PDR 0x0408 at 0x007e11ce (len=2)
PDR 0x0408 not found from wlan card PDA. Using default data.
len=2: 64 00
Plugging PDR 0x0001 at 0x007e1388 (len=16)
Plug record length mismatch (PDR=0x0001): 12 != 16
==> extend from default
PRI: old iface 1:4-4 new iface 4:4-5
Plugging PDR 0xffffffff at 0x007ee5d0 (len=14)
Plugging PDR 0x0103 at 0x007ee592 (len=12)
Plugging PDR 0x0104 at 0x007ee6ca (len=2)
Plugging PDR 0x0105 at 0x007ee700 (len=2)
Plugging PDR 0x0107 at 0x007ee5a0 (len=2)
Plugging PDR 0x0006 at 0x007ee56c (len=10)
Plugging PDR 0x0412 at 0x007ee720 (len=6)
PDR 0x0412 not found from wlan card PDA. Using default data.
len=6: 03 00 02 00 02 00
Plugging PDR 0x0414 at 0x007ee5aa (len=36)
PDR 0x0414 not found from wlan card PDA. Using default data.
len=36: 36 00 36 00 36 00 04 00 01 00 03 00 3b 00 3b 00 40 00 06 00 01 00 03 00 40 00 40 00 4a 00 08 00 01 00 03 00
Plugging PDR 0x0202 at 0x007f1250 (len=100)
Plugging PDR 0x0203 at 0x007f12b4 (len=128)
Plugging PDR 0x0204 at 0x007f1434 (len=80)
Plugging PDR 0x0405 at 0x007f1484 (len=4)
PDR 0x0405 not found from wlan card PDA. Using default data.
len=4: 00 00 00 30
Plugging PDR 0x0300 at 0x007f1488 (len=28)
Plugging PDR 0x0301 at 0x007f14a4 (len=34)
Plugging PDR 0x0101 at 0x007f16b0 (len=6)
Plugging PDR 0x0105 at 0x007f16bc (len=2)
Plugging PDR 0x0105 at 0x007f17bc (len=2)
Plugging PDR 0x0406 at 0x007f1750 (len=2)
PDR 0x0406 not found from wlan card PDA. Using default data.
len=2: 64 00
Plugging PDR 0x0302 at 0x007f14cc (len=2)
PDR 0x0302 not found from wlan card PDA. Using default data.
len=2: 12 00
Generating CRC-16 (start=0x007e1800, len=65536) at 0x007e17fe
Allowing S3 overlap due to CRC-16 signature at 0x007e17fe (was: ffff)
After srec file merge
S3 area count: 5
addr=0x007E0000..0x007E0A1D (len=2590)
addr=0x007E0B00..0x007E13DB (len=2268)
addr=0x007E17FE..0x007EEAAB (len=53934)
addr=0x007F0800..0x007F17FF (len=4096)
addr=0x007FE000..0x007FECD1 (len=3282)
Total data length: 66170

This image is not meant to be downloaded to non-volatile memory.
Incompatible update data.
root@konstantinos-laptop:/home/konstantinos/Λήψεις/Latest-prism/secondary-RAM#

Ήταν ο μόνος συνδυασμός που πήρα o.k. αλλά στο τέλος πάλι τζίφος.

[sotos21]

Κώδικας: Επιλογή όλων

konstantinos@konstantinos-laptop:~/Λήψεις/Latest-prism/secondary-FLASH$ sudo su
[sudo] password for konstantinos:
root@konstantinos-laptop:/home/konstantinos/Λήψεις/Latest-prism/secondary-FLASH#
prism2_srec -v wlan0 pk010101.hex sf010804.hex
S3 CRC-16 generation record: start=0x007E17FE len=2 prog=0
Start address 0x00000000
srec summary for pk010101.hex
Component: 0x0015 1.1.1 (primary firmware)
Supported platforms:
0x800c 1.0.0, 0x8013 1.0.0, 0x8017 1.0.0, 0x801b 1.0.0, 0x8022 1.0.0
Interface compatibility information:
role=Supplier variant=1 range=4-4 iface=Primary Firmware-Driver (3)
role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
Separate S3 data areas:
S3 area count: 3
addr=0x007E0000..0x007E0B55 (len=2902)
addr=0x007E0C00..0x007E151F (len=2336)
addr=0x007E17FE..0x007E17FF (len=2)
Total data length: 5240
Start address 0x00000000

S3 CRC-16 generation record: start=0x007E1800 len=65536 prog=1
Start address 0x00000000
srec summary for sf010804.hex
Component: 0x001f 1.8.4 (station firmware)
Supported platforms:
0x800a 1.0.0, 0x800b 1.0.0, 0x800c 1.0.0, 0x800d 1.0.0, 0x8012 1.0.0
0x8013 1.0.0, 0x8014 1.0.0, 0x8016 1.0.0, 0x8017 1.0.0, 0x8018 1.0.0
0x801a 1.0.0, 0x801b 1.0.0, 0x801c 1.0.0, 0x8021 1.0.0, 0x8022 1.0.0
0x8023 1.0.0
Interface compatibility information:
role=Supplier variant=4 range=1-15 iface=Station Firmware-Driver (4)
role=Actor variant=1 range=1-1 iface=Modem-Firmware (1)
role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
role=Actor variant=1 range=4-4 iface=Primary Firmware-Driver (3)
Separate S3 data areas:
S3 area count: 3
addr=0x007E1800..0x007EEAF9 (len=54010)
addr=0x007F0800..0x007F17FF (len=4096)
addr=0x007FE000..0x007FECD1 (len=3282)
Total data length: 61388
Start address 0x00000000

Overriding component id and supplied range data using PDA.
Wireless LAN card information:
Components:
NICID: 0x8013 v1.0.0
PRIID: 0x0015 v1.1.0
STAID: 0x001f v1.4.9
Interface compatibility information:
PRI role=Supplier variant=1 range=1-1 iface=Modem-Firmware (1)
PRI role=Supplier variant=2 range=1-1 iface=Controller-Firmware (2)
PRI role=Supplier variant=1 range=4-4 iface=Primary Firmware-Driver (3)
STA role=Supplier variant=1 range=1-9 iface=Station Firmware-Driver (4)
PRI role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
STA role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
STA role=Actor variant=1 range=1-1 iface=Modem-Firmware (1)

Verifying update compatibility and combining data:
Plugging PDR 0xffffffff at 0x007e1510 (len=14)
Plugging PDR 0x0003 at 0x007e14b8 (len=12)
Plugging PDR 0x0005 at 0x007e1310 (len=2)
PDR 0x0005 not found from wlan card PDA. Using default data.
len=2: 00 01
Plugging PDR 0x0006 at 0x007e14f0 (len=10)
Plugging PDR 0x0007 at 0x007e1504 (len=10)
Plugging PDR 0x0008 at 0x007e14c4 (len=8)
Plugging PDR 0x0400 at 0x007e1314 (len=2)
Plugging PDR 0x0402 at 0x007e131e (len=4)
Plugging PDR 0x0403 at 0x007e1316 (len=16)
Plugging PDR 0x0404 at 0x007e1326 (len=10)
Plugging PDR 0x0408 at 0x007e1312 (len=2)
PDR 0x0408 not found from wlan card PDA. Using default data.
len=2: 64 00
Plugging PDR 0x0001 at 0x007e14cc (len=16)
Plug record length mismatch (PDR=0x0001): 12 != 16
==> extend from default
PRI: old iface 1:4-4 new iface 1:4-4
Plugging PDR 0xffffffff at 0x007ee61e (len=14)
Plugging PDR 0x0202 at 0x007f1250 (len=100)
Plugging PDR 0x0203 at 0x007f12b4 (len=128)
Plugging PDR 0x0204 at 0x007f1434 (len=80)
Plugging PDR 0x0405 at 0x007f1484 (len=4)
PDR 0x0405 not found from wlan card PDA. Using default data.
len=4: 00 00 00 30
Plugging PDR 0x0300 at 0x007f1488 (len=28)
Plugging PDR 0x0301 at 0x007f14a4 (len=34)
Plugging PDR 0x0101 at 0x007f16b0 (len=6)
Plugging PDR 0x0103 at 0x007ee5e0 (len=12)
Plugging PDR 0x0104 at 0x007ee718 (len=2)
Plugging PDR 0x0105 at 0x007f16bc (len=2)
Plugging PDR 0x0105 at 0x007ee74e (len=2)
Plugging PDR 0x0105 at 0x007f17bc (len=2)
Plugging PDR 0x0107 at 0x007ee5ee (len=2)
Plugging PDR 0x0006 at 0x007ee5ba (len=10)
Plugging PDR 0x0406 at 0x007f1750 (len=2)
PDR 0x0406 not found from wlan card PDA. Using default data.
len=2: 64 00
Plugging PDR 0x0302 at 0x007f14cc (len=2)
PDR 0x0302 not found from wlan card PDA. Using default data.
len=2: 12 00
Plugging PDR 0x0303 at 0x007f14ce (len=2)
PDR 0x0303 not found from wlan card PDA. Using default data.
len=2: ff 1f
Plugging PDR 0x0412 at 0x007ee76e (len=6)
PDR 0x0412 not found from wlan card PDA. Using default data.
len=6: 03 00 02 00 02 00
Plugging PDR 0x0413 at 0x0000118a (len=2)
Could not find data position for plugging PDR 0x0413 at 0x0000118a (len=2)
PDR 0x0413 is not in wlan card PDA and there is no default data. Ignoring plug record.
Plugging PDR 0x0414 at 0x007ee5f8 (len=36)
PDR 0x0414 not found from wlan card PDA. Using default data.
len=36: 36 00 36 00 36 00 04 00 01 00 03 00 3b 00 3b 00 40 00 06 00 01 00 03 00 40 00 40 00 4a 00 08 00 01 00 03 00
Generating CRC-16 (start=0x007e1800, len=65536) at 0x007e17fe
Allowing S3 overlap due to CRC-16 signature at 0x007e17fe (was: ffff)
After srec file merge
S3 area count: 5
addr=0x007E0000..0x007E0B55 (len=2902)
addr=0x007E0C00..0x007E151F (len=2336)
addr=0x007E17FE..0x007EEAF9 (len=54012)
addr=0x007F0800..0x007F17FF (len=4096)
addr=0x007FE000..0x007FECD1 (len=3282)
Total data length: 66628
OK.
root@konstantinos-laptop:/home/konstantinos/Λήψεις/Latest-prism/secondary-FLASH#
prism2_srec -v -f wlan0 pk010101.hex sf010804.hex
S3 CRC-16 generation record: start=0x007E17FE len=2 prog=0
Start address 0x00000000
srec summary for pk010101.hex
Component: 0x0015 1.1.1 (primary firmware)
Supported platforms:
0x800c 1.0.0, 0x8013 1.0.0, 0x8017 1.0.0, 0x801b 1.0.0, 0x8022 1.0.0
Interface compatibility information:
role=Supplier variant=1 range=4-4 iface=Primary Firmware-Driver (3)
role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
Separate S3 data areas:
S3 area count: 3
addr=0x007E0000..0x007E0B55 (len=2902)
addr=0x007E0C00..0x007E151F (len=2336)
addr=0x007E17FE..0x007E17FF (len=2)
Total data length: 5240
Start address 0x00000000

S3 CRC-16 generation record: start=0x007E1800 len=65536 prog=1
Start address 0x00000000
srec summary for sf010804.hex
Component: 0x001f 1.8.4 (station firmware)
Supported platforms:
0x800a 1.0.0, 0x800b 1.0.0, 0x800c 1.0.0, 0x800d 1.0.0, 0x8012 1.0.0
0x8013 1.0.0, 0x8014 1.0.0, 0x8016 1.0.0, 0x8017 1.0.0, 0x8018 1.0.0
0x801a 1.0.0, 0x801b 1.0.0, 0x801c 1.0.0, 0x8021 1.0.0, 0x8022 1.0.0
0x8023 1.0.0
Interface compatibility information:
role=Supplier variant=4 range=1-15 iface=Station Firmware-Driver (4)
role=Actor variant=1 range=1-1 iface=Modem-Firmware (1)
role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
role=Actor variant=1 range=4-4 iface=Primary Firmware-Driver (3)
Separate S3 data areas:
S3 area count: 3
addr=0x007E1800..0x007EEAF9 (len=54010)
addr=0x007F0800..0x007F17FF (len=4096)
addr=0x007FE000..0x007FECD1 (len=3282)
Total data length: 61388
Start address 0x00000000

Overriding component id and supplied range data using PDA.
Wireless LAN card information:
Components:
NICID: 0x8013 v1.0.0
PRIID: 0x0015 v1.1.0
STAID: 0x001f v1.4.9
Interface compatibility information:
PRI role=Supplier variant=1 range=1-1 iface=Modem-Firmware (1)
PRI role=Supplier variant=2 range=1-1 iface=Controller-Firmware (2)
PRI role=Supplier variant=1 range=4-4 iface=Primary Firmware-Driver (3)
STA role=Supplier variant=1 range=1-9 iface=Station Firmware-Driver (4)
PRI role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
STA role=Actor variant=2 range=1-1 iface=Controller-Firmware (2)
STA role=Actor variant=1 range=1-1 iface=Modem-Firmware (1)

Verifying update compatibility and combining data:
Plugging PDR 0xffffffff at 0x007e1510 (len=14)
Plugging PDR 0x0003 at 0x007e14b8 (len=12)
Plugging PDR 0x0005 at 0x007e1310 (len=2)
PDR 0x0005 not found from wlan card PDA. Using default data.
len=2: 00 01
Plugging PDR 0x0006 at 0x007e14f0 (len=10)
Plugging PDR 0x0007 at 0x007e1504 (len=10)
Plugging PDR 0x0008 at 0x007e14c4 (len=8)
Plugging PDR 0x0400 at 0x007e1314 (len=2)
Plugging PDR 0x0402 at 0x007e131e (len=4)
Plugging PDR 0x0403 at 0x007e1316 (len=16)
Plugging PDR 0x0404 at 0x007e1326 (len=10)
Plugging PDR 0x0408 at 0x007e1312 (len=2)
PDR 0x0408 not found from wlan card PDA. Using default data.
len=2: 64 00
Plugging PDR 0x0001 at 0x007e14cc (len=16)
Plug record length mismatch (PDR=0x0001): 12 != 16
==> extend from default
PRI: old iface 1:4-4 new iface 1:4-4
Plugging PDR 0xffffffff at 0x007ee61e (len=14)
Plugging PDR 0x0202 at 0x007f1250 (len=100)
Plugging PDR 0x0203 at 0x007f12b4 (len=128)
Plugging PDR 0x0204 at 0x007f1434 (len=80)
Plugging PDR 0x0405 at 0x007f1484 (len=4)
PDR 0x0405 not found from wlan card PDA. Using default data.
len=4: 00 00 00 30
Plugging PDR 0x0300 at 0x007f1488 (len=28)
Plugging PDR 0x0301 at 0x007f14a4 (len=34)
Plugging PDR 0x0101 at 0x007f16b0 (len=6)
Plugging PDR 0x0103 at 0x007ee5e0 (len=12)
Plugging PDR 0x0104 at 0x007ee718 (len=2)
Plugging PDR 0x0105 at 0x007f16bc (len=2)
Plugging PDR 0x0105 at 0x007ee74e (len=2)
Plugging PDR 0x0105 at 0x007f17bc (len=2)
Plugging PDR 0x0107 at 0x007ee5ee (len=2)
Plugging PDR 0x0006 at 0x007ee5ba (len=10)
Plugging PDR 0x0406 at 0x007f1750 (len=2)
PDR 0x0406 not found from wlan card PDA. Using default data.
len=2: 64 00
Plugging PDR 0x0302 at 0x007f14cc (len=2)
PDR 0x0302 not found from wlan card PDA. Using default data.
len=2: 12 00
Plugging PDR 0x0303 at 0x007f14ce (len=2)
PDR 0x0303 not found from wlan card PDA. Using default data.
len=2: ff 1f
Plugging PDR 0x0412 at 0x007ee76e (len=6)
PDR 0x0412 not found from wlan card PDA. Using default data.
len=6: 03 00 02 00 02 00
Plugging PDR 0x0413 at 0x0000118a (len=2)
Could not find data position for plugging PDR 0x0413 at 0x0000118a (len=2)
PDR 0x0413 is not in wlan card PDA and there is no default data. Ignoring plug record.
Plugging PDR 0x0414 at 0x007ee5f8 (len=36)
PDR 0x0414 not found from wlan card PDA. Using default data.
len=36: 36 00 36 00 36 00 04 00 01 00 03 00 3b 00 3b 00 40 00 06 00 01 00 03 00 40 00 40 00 4a 00 08 00 01 00 03 00
Generating CRC-16 (start=0x007e1800, len=65536) at 0x007e17fe
Allowing S3 overlap due to CRC-16 signature at 0x007e17fe (was: ffff)
After srec file merge
S3 area count: 5
addr=0x007E0000..0x007E0B55 (len=2902)
addr=0x007E0C00..0x007E151F (len=2336)
addr=0x007E17FE..0x007EEAF9 (len=54012)
addr=0x007F0800..0x007F17FF (len=4096)
addr=0x007FE000..0x007FECD1 (len=3282)
Total data length: 66628
OK.

Downloading to non-volatile memory (flash).
Note! This can take about 30 seconds. Do _not_ remove card during download.
OK.
Components after download:
NICID: 0x8013 v1.0.0
PRIID: 0x0015 v1.1.1
STAID: 0x001f v1.8.4
root@konstantinos-laptop:/home/konstantinos/Λήψεις/Latest-prism/secondary-FLASH#