Unable to connect to the Internet

[Vegeta]

Ίσως ήταν λάθος μου που σου είπα να τρέξεις την πρώτη εντολή wget από Ubuntu , αφού δεν έχεις καθόλου Internet εκεί.
Αυτό που έκανες με τα Xp ήταν πολύ σωστό και το μετέφερες και στο Home του Ubuntu , ακόμη πιο σωστό.
Τώρα πρέπει να έχεις το αρχείο netinfo.sh στο home σου στο Ubuntu. Αν δεν έχει την ονομασία netinfo.sh αλλά κάτι άλλο , τότε μετονόμασε το εσύ σε netinfo.sh

μισο λεπτο γιατι μπερδευτηκα... εχω 2 αρχεια. το ενα ειναι το netinfo.sh και το αλλο ειναι το netscript.sh.
το netscript.sh ειναι αυτο που κατευασα απο το link και εχει περιεχομενο αυτα που γραφει ο eliasps πιο πανω. το περιεχομενο του netinfo.sh ειναι κενο.
να αλλαξω ονομα στο netscript.sh και να το κανω netinfo.sh??? (θα γινει over-write και θα μου μεινει 1 αρχειο με ονομα netinfo.sh αλλα με το περιεχομενο του netscript.sh)

Οπότε ανοίγεις ένα τερματικό , αγνοείς την πρώτη εντολή (wget) και συνεχίζεις με τις υπόλοιπες δύο.

Κώδικας: Επιλογή όλων

chmod a+x netinfo.sh
./netinfo.sh

τις δινω και δεν μου γραφει τιποτα.

μετα, δινω:

Κώδικας: Επιλογή όλων

lspci -nnk | grep -iA2 vga

μου γραφει:

Κώδικας: Επιλογή όλων

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:68d9]
Kernel driver in use: fglrx_pci
Kernel modules: fglrx

δινω:

Κώδικας: Επιλογή όλων

cat /var/log/Xorg.0.log | grep -e EE -e WW

μου γραφει:

Κώδικας: Επιλογή όλων

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(II) Loading extension MIT-SCREEN-SAVER
(WW) Falling back to old probe method for fglrx
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(WW) fglrx(0): board is an unknown third party board, chipset is supported

δινω:

Κώδικας: Επιλογή όλων

dpkg -l | grep -e flash -e linux-image

μου γραφει:

Κώδικας: Επιλογή όλων

ii flashplugin-installer 11.2.202.236ubuntu0.10.04.1 Adobe Flash Player plugin installer
rc linux-image-2.6.31-20-generic-pae 2.6.31-20.58 Linux kernel image for version 2.6.31 on x86
ii linux-image-2.6.31-21-generic-pae 2.6.31-21.59 Linux kernel image for version 2.6.31 on x86
ii linux-image-2.6.32-22-generic-pae 2.6.32-22.36 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-23-generic-pae 2.6.32-23.37 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-24-generic-pae 2.6.32-24.43 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-25-generic-pae 2.6.32-25.45 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-26-generic-pae 2.6.32-26.48 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-27-generic-pae 2.6.32-27.49 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-28-generic-pae 2.6.32-28.55 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-29-generic-pae 2.6.32-29.58 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-30-generic-pae 2.6.32-30.59 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-31-generic-pae 2.6.32-31.61 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-32-generic-pae 2.6.32-32.62 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-33-generic-pae 2.6.32-33.72 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-34-generic-pae 2.6.32-34.77 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-35-generic-pae 2.6.32-35.78 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-36-generic-pae 2.6.32-36.79 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-37-generic-pae 2.6.32-37.81 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-38-generic-pae 2.6.32-38.83 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-39-generic-pae 2.6.32-39.86 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-40-generic-pae 2.6.32-40.87 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-41-generic-pae 2.6.32-41.94 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-42-generic-pae 2.6.32-42.95 Linux kernel image for version 2.6.32 on x86
ii linux-image-generic-pae 2.6.32.42.49 Generic Linux kernel image

[the_eye]

Από τις εντολές που έδωσες φαίνεται ότι έχει απενεργοποιηθεί η κάρτα δικτύου.
Δώσε τις εντολές και δώσε το αποτέλεσμα, όπως και πριν.

Κώδικας: Επιλογή όλων

cat /etc/network/interfaces
sudo ifconfig eth0 up
ping -c 4 8.8.8.8


[Learner]

το netscript.sh ειναι αυτο που κατευασα απο το link

τότε πρέπει να τρέξεις αυτό .
Περίμενε όμως πρώτα , δώσε αυτές που λέει ο the_eye και αν δεν διορθωθεί το πρόβλημα τότε τρέχεις

Κώδικας: Επιλογή όλων

chmod a+x netscript.sh
./netscript.sh

πρέπει να βρίσκεσαι στον φάκελο που βρίσκεται και το netsrcipt.sh για να τρέξουν σωστά οι παραπάνω εντολές. Υποθέτω πως το netscript.sh βρίσκεται στο /home σου.
Αν π.χ βρίσκεται στο Downloads/ πρέπει πρώτα να συνδεθείς

Κώδικας: Επιλογή όλων

cd Downloads

και μετά τα τρέξεις τις παραπάνω εντολές.
και μετά ψάξε το home σου να βρεις ένα αρχείο που θα λέγεται netinfo.txt (θα έχει κατάληξη .txt)

[Vegeta]

δινω:

Κώδικας: Επιλογή όλων

cat /etc/network/interfaces

μου γραφει:

Κώδικας: Επιλογή όλων

auto lo
iface lo inet loopback

δινω:

Κώδικας: Επιλογή όλων

sudo ifconfig eth0 up

το δεχεται κανονικα.

δινω:

Κώδικας: Επιλογή όλων

ping -c 4 8.8.8.8

μου γραφει:

Κώδικας: Επιλογή όλων

connect: Network is unreachable

και μετά ψάξε το home σου να βρεις ένα αρχείο που θα λέγεται netinfo.txt (θα έχει κατάληξη .txt)

οκ, υπαρχει τωρα στο home αρχειο που λεγεται netinfo.txt

[Learner]

οκ, υπαρχει τωρα στο home αρχειο που λεγεται netinfo.txt

άνοιξε το με τον gedit

Κώδικας: Επιλογή όλων

gedit netinfo.txt

και κάνε τα όλα ένα copy και ένα paste εδώ --> http://pastebin.ubuntu-gr.org/ και μετά δώσε μας το link για να τα δούμε.

[the_eye]

Ωραία δώσε και

Κώδικας: Επιλογή όλων

ifconfig

[Vegeta]

και κάνε τα όλα ένα copy και ένα paste εδώ --> http://pastebin.ubuntu-gr.org/ και μετά δώσε μας το link για να τα δούμε.

ελπιζω να το εκανα σωστα... http://pastebin.ubuntu-gr.org/m782ff59e

δινω:

Κώδικας: Επιλογή όλων

ifconfig

μου γραφει:

Κώδικας: Επιλογή όλων

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:480 (480.0 B) TX bytes:480 (480.0 B)

[the_eye]

Για δώσε και

Κώδικας: Επιλογή όλων

sudo ifconfig eth0 up
ifconfig
dmesg

Η 3η εντολή θα βγάλει πολλά

[Learner]

Κοίτα λίγο τα αποτελέσματα του script the_eye. Επειδή είναι η 10.04 έχω κάποιους ενδοιασμούς , όμως βλέπω πως το NetworkManager.conf είναι άδειο εντελώς , όπως επίσης βλέπω πως στο resolv.conf αντί του nameserver 127.0.0.1 (που είναι το local) έχει το nameserver 192.168.2.1.

Τι λες ;

[Vegeta]

δινω:

Κώδικας: Επιλογή όλων

sudo ifconfig eth0 up

το δεχεται κανονικα.

δινω:

Κώδικας: Επιλογή όλων

ifconfig

μου γραφει:

Κώδικας: Επιλογή όλων

eth0 Link encap:Ethernet HWaddr e0:cb:4e:07:7f:bd
inet6 addr: fe80::e2cb:4eff:fe07:7fbd/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:44 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:2
collisions:0 txqueuelen:1000
RX bytes:13371 (13.3 KB) TX bytes:468 (468.0 B)
Interrupt:30

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:480 (480.0 B) TX bytes:480 (480.0 B)

δινω:

Κώδικας: Επιλογή όλων

dmesg

οπως λες μου βγαζει πολλα. εχοντας full-screen το παραθυρο με το τερματικο μπορω με copy-paste να δω τα παρακατω:

Κώδικας: Επιλογή όλων

[ 0.374103] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f]
[ 0.374107] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f]
[ 0.374153] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe7fd000-0xfe7fd0ff]
[ 0.374163] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.374199] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007]
[ 0.374204] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03]
[ 0.374209] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887]
[ 0.374213] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803]
[ 0.374218] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f]
[ 0.374222] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f]
[ 0.374276] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.374283] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe8c0000-0xfe8dffff]
[ 0.374288] pci 0000:01:00.0: reg 20 io port: [0xc000-0xc0ff]
[ 0.374295] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe8a0000-0xfe8bffff]
[ 0.374322] pci 0000:01:00.0: supports D1 D2
[ 0.374349] pci 0000:01:00.1: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff]
[ 0.374388] pci 0000:01:00.1: supports D1 D2
[ 0.374425] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.374427] pci 0000:00:01.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.374431] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.374466] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.374512] pci 0000:04:00.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
[ 0.374522] pci 0000:04:00.0: reg 14 32bit mmio: [0xfebff400-0xfebff47f]
[ 0.374547] pci 0000:04:00.0: reg 20 32bit mmio: [0xfebff000-0xfebff07f]
[ 0.374557] pci 0000:04:00.0: reg 24 32bit mmio: [0xfebfec00-0xfebfec7f]
[ 0.374673] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.374757] pci 0000:03:00.0: reg 24 32bit mmio: [0xfeafe000-0xfeafffff]
[ 0.374765] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeaeffff]
[ 0.374812] pci 0000:03:00.0: PME# supported from D3hot
[ 0.374816] pci 0000:03:00.0: PME# disabled
[ 0.374866] pci 0000:03:00.1: reg 10 io port: [0xec00-0xec07]
[ 0.374874] pci 0000:03:00.1: reg 14 io port: [0xe880-0xe883]
[ 0.374882] pci 0000:03:00.1: reg 18 io port: [0xe800-0xe807]
[ 0.374890] pci 0000:03:00.1: reg 1c io port: [0xe480-0xe483]
[ 0.374898] pci 0000:03:00.1: reg 20 io port: [0xe400-0xe40f]
[ 0.374989] pci 0000:00:1c.4: bridge io port: [0xe000-0xefff]
[ 0.374992] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.375041] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe9c0000-0xfe9fffff]
[ 0.375048] pci 0000:02:00.0: reg 18 io port: [0xdc00-0xdc7f]
[ 0.375119] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.375123] pci 0000:02:00.0: PME# disabled
[ 0.375166] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
[ 0.375169] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.375213] pci 0000:00:1e.0: transparent bridge
[ 0.375237] pci_bus 0000:00: on NUMA node 0
[ 0.375240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.375363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.375409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.375495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.375542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.375595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.388967] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.389053] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.389137] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.389222] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.389306] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.389391] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.389476] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.389560] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.389649] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.389653] vgaarb: loaded
[ 0.389729] SCSI subsystem initialized
[ 0.389735] libata version 3.00 loaded.
[ 0.389735] usbcore: registered new interface driver usbfs
[ 0.389735] usbcore: registered new interface driver hub
[ 0.389735] usbcore: registered new device driver usb
[ 0.389735] ACPI: WMI: Mapper loaded
[ 0.389735] PCI: Using ACPI for IRQ routing
[ 0.389735] NetLabel: Initializing
[ 0.389735] NetLabel: domain hash size = 128
[ 0.389735] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.389735] NetLabel: unlabeled traffic allowed by default
[ 0.389735] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.389735] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.389735] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.400140] Switching to clocksource tsc
[ 0.401773] AppArmor: AppArmor Filesystem Enabled
[ 0.401787] pnp: PnP ACPI init
[ 0.401800] ACPI: bus type pnp registered
[ 0.404621] pnp: PnP ACPI: found 16 devices
[ 0.404623] ACPI: ACPI bus type pnp unregistered
[ 0.404626] PnPBIOS: Disabled by ACPI PNP
[ 0.404635] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.404641] system 00:07: ioport range 0x290-0x297 has been reserved
[ 0.404646] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.404648] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.404650] system 00:08: ioport range 0x500-0x57f has been reserved
[ 0.404652] system 00:08: iomem range 0xfed08000-0xfed08fff has been reserved
[ 0.404654] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.404657] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.404659] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.404663] system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.404668] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.404670] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.404674] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.404678] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.404680] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[ 0.404682] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.404685] system 00:0f: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.439368] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.439370] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.439373] pci 0000:00:01.0: MEM window: 0xfe800000-0xfe8fffff
[ 0.439376] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.439379] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.439381] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.439385] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf03fffff
[ 0.439388] pci 0000:00:1c.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.439393] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.439395] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.439399] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff
[ 0.439402] pci 0000:00:1c.1: PREFETCH window: 0x000000f0400000-0x000000f05fffff
[ 0.439407] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.439409] pci 0000:00:1c.4: IO window: 0xe000-0xefff
[ 0.439413] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
[ 0.439416] pci 0000:00:1c.4: PREFETCH window: 0x000000f0600000-0x000000f07fffff
[ 0.439421] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 0.439423] pci 0000:00:1c.5: IO window: 0xd000-0xdfff
[ 0.439427] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
[ 0.439430] pci 0000:00:1c.5: PREFETCH window: 0x000000f0800000-0x000000f09fffff
[ 0.439435] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.439436] pci 0000:00:1e.0: IO window: disabled
[ 0.439440] pci 0000:00:1e.0: MEM window: disabled
[ 0.439443] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.439453] alloc irq_desc for 16 on node -1
[ 0.439454] alloc kstat_irqs on node -1
[ 0.439458] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.439461] pci 0000:00:01.0: setting latency timer to 64
[ 0.439467] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.439469] alloc irq_desc for 17 on node -1
[ 0.439471] alloc kstat_irqs on node -1
[ 0.439473] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.439476] pci 0000:00:1c.0: setting latency timer to 64
[ 0.439482] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.439485] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.439488] pci 0000:00:1c.1: setting latency timer to 64
[ 0.439495] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.439498] pci 0000:00:1c.4: setting latency timer to 64
[ 0.439504] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.439507] pci 0000:00:1c.5: setting latency timer to 64
[ 0.439512] pci 0000:00:1e.0: setting latency timer to 64
[ 0.439515] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.439517] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.439519] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.439521] pci_bus 0000:01: resource 1 mem: [0xfe800000-0xfe8fffff]
[ 0.439523] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.439525] pci_bus 0000:05: resource 0 io: [0x1000-0x1fff]
[ 0.439527] pci_bus 0000:05: resource 1 mem: [0xf0000000-0xf03fffff]
[ 0.439528] pci_bus 0000:05: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.439530] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff]
[ 0.439532] pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.439534] pci_bus 0000:04: resource 2 pref mem [0xf0400000-0xf05fffff]
[ 0.439536] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.439538] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.439540] pci_bus 0000:03: resource 2 pref mem [0xf0600000-0xf07fffff]
[ 0.439541] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.439543] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.439545] pci_bus 0000:02: resource 2 pref mem [0xf0800000-0xf09fffff]
[ 0.439547] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.439549] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.439571] NET: Registered protocol family 2
[ 0.439635] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.439838] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.440086] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.440198] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.440200] TCP reno registered
[ 0.440248] NET: Registered protocol family 1
[ 0.440262] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.440276] pci 0000:00:1a.0: PCI INT A disabled
[ 0.440281] alloc irq_desc for 21 on node -1
[ 0.440282] alloc kstat_irqs on node -1
[ 0.440285] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.440299] pci 0000:00:1a.1: PCI INT B disabled
[ 0.440303] alloc irq_desc for 18 on node -1
[ 0.440304] alloc kstat_irqs on node -1
[ 0.440307] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.440321] pci 0000:00:1a.2: PCI INT C disabled
[ 0.440329] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.440344] pci 0000:00:1a.7: PCI INT C disabled
[ 0.440352] alloc irq_desc for 23 on node -1
[ 0.440354] alloc kstat_irqs on node -1
[ 0.440356] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.440370] pci 0000:00:1d.0: PCI INT A disabled
[ 0.440374] alloc irq_desc for 19 on node -1
[ 0.440375] alloc kstat_irqs on node -1
[ 0.440378] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.440391] pci 0000:00:1d.1: PCI INT B disabled
[ 0.440396] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.440410] pci 0000:00:1d.2: PCI INT C disabled
[ 0.440417] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.440428] pci 0000:00:1d.7: PCI INT A disabled
[ 0.440436] pci 0000:01:00.0: Boot video device
[ 0.440630] cpufreq-nforce2: No nForce2 chipset.
[ 0.440648] Scanning for low memory corruption every 60 seconds
[ 0.440712] audit: initializing netlink socket (disabled)
[ 0.440718] type=2000 audit(1346029168.439:1): initialized
[ 0.448208] highmem bounce pool size: 64 pages
[ 0.448211] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.449291] VFS: Disk quotas dquot_6.5.2
[ 0.449332] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.449734] fuse init (API version 7.13)
[ 0.449797] msgmni has been set to 1621
[ 0.449964] alg: No test for stdrng (krng)
[ 0.450002] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.450005] io scheduler noop registered
[ 0.450006] io scheduler anticipatory registered
[ 0.450007] io scheduler deadline registered
[ 0.450035] io scheduler cfq registered (default)
[ 0.450134] alloc irq_desc for 24 on node -1
[ 0.450136] alloc kstat_irqs on node -1
[ 0.450140] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.450145] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.450217] alloc irq_desc for 25 on node -1
[ 0.450218] alloc kstat_irqs on node -1
[ 0.450223] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.450229] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.450316] alloc irq_desc for 26 on node -1
[ 0.450317] alloc kstat_irqs on node -1
[ 0.450322] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.450328] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.450420] alloc irq_desc for 27 on node -1
[ 0.450421] alloc kstat_irqs on node -1
[ 0.450426] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
[ 0.450432] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.450518] alloc irq_desc for 28 on node -1
[ 0.450519] alloc kstat_irqs on node -1
[ 0.450524] pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X
[ 0.450530] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.450595] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.450681] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.450753] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.450756] ACPI: Power Button [PWRB]
[ 0.450789] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.450791] ACPI: Power Button [PWRF]
[ 0.451195] processor LNXCPU:00: registered as cooling_device0
[ 0.451386] processor LNXCPU:01: registered as cooling_device1
[ 0.451574] processor LNXCPU:02: registered as cooling_device2
[ 0.451762] processor LNXCPU:03: registered as cooling_device3
[ 0.453846] isapnp: Scanning for PnP cards...
[ 0.454789] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.454872] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.455204] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.455969] brd: module loaded
[ 0.456302] loop: module loaded
[ 0.456363] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.456439] ata_piix 0000:00:1f.2: version 2.13
[ 0.456448] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.456451] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.456481] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.459326] scsi0 : ata_piix
[ 0.463398] scsi1 : ata_piix
[ 0.464375] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.464379] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.464410] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.464426] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.464457] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.464486] scsi2 : ata_piix
[ 0.464531] scsi3 : ata_piix
[ 0.465330] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.465333] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.465404] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.465410] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.465436] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 0.465447] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 0.465654] Fixed MDIO Bus: probed
[ 0.465678] PPP generic driver version 2.4.2
[ 0.465700] tun: Universal TUN/TAP device driver, 1.6
[ 0.465702] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.465760] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.465768] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.465777] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.465779] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.465800] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.465823] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.469723] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.469733] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ff000
[ 0.483383] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.483447] usb usb1: configuration #1 chosen from 1 choice
[ 0.483467] hub 1-0:1.0: USB hub found
[ 0.483473] hub 1-0:1.0: 6 ports detected
[ 0.483510] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.483518] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.483521] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.483542] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.483565] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.487455] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.487464] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7fe000
[ 0.494471] Freeing initrd memory: 7766k freed
[ 0.503386] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.503447] usb usb2: configuration #1 chosen from 1 choice
[ 0.503466] hub 2-0:1.0: USB hub found
[ 0.503470] hub 2-0:1.0: 6 ports detected
[ 0.503509] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.503520] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.503534] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.503539] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.503541] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.503567] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.503594] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.503660] usb usb3: configuration #1 chosen from 1 choice
[ 0.503678] hub 3-0:1.0: USB hub found
[ 0.503682] hub 3-0:1.0: 2 ports detected
[ 0.503713] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.503719] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.503721] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.503745] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.503771] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.503829] usb usb4: configuration #1 chosen from 1 choice
[ 0.503847] hub 4-0:1.0: USB hub found
[ 0.503851] hub 4-0:1.0: 2 ports detected
[ 0.503882] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.503887] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.503889] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.503910] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.503930] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.503988] usb usb5: configuration #1 chosen from 1 choice
[ 0.504005] hub 5-0:1.0: USB hub found
[ 0.504009] hub 5-0:1.0: 2 ports detected
[ 0.504041] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.504046] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.504048] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.504068] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.504088] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.504147] usb usb6: configuration #1 chosen from 1 choice
[ 0.504166] hub 6-0:1.0: USB hub found
[ 0.504170] hub 6-0:1.0: 2 ports detected
[ 0.504200] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.504205] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.504207] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.504229] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.504250] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.504307] usb usb7: configuration #1 chosen from 1 choice
[ 0.504326] hub 7-0:1.0: USB hub found
[ 0.504330] hub 7-0:1.0: 2 ports detected
[ 0.504362] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.504367] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.504370] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.504390] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.504410] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.504468] usb usb8: configuration #1 chosen from 1 choice
[ 0.504486] hub 8-0:1.0: USB hub found
[ 0.504491] hub 8-0:1.0: 2 ports detected
[ 0.504560] PNP: No PS/2 controller found. Probing ports directly.
[ 0.507724] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.507729] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.507783] mice: PS/2 mouse device common for all mice
[ 0.507852] rtc_cmos 00:03: RTC can wake from S4
[ 0.507874] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.507894] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.507963] device-mapper: uevent: version 1.0.3
[ 0.508059] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.508201] device-mapper: multipath: version 1.1.0 loaded
[ 0.508203] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.508302] EISA: Probing bus 0 at eisa.0
[ 0.508306] Cannot allocate resource for EISA slot 1
[ 0.508307] Cannot allocate resource for EISA slot 2
[ 0.508323] EISA: Detected 0 cards.
[ 0.508515] cpuidle: using governor ladder
[ 0.508516] cpuidle: using governor menu
[ 0.508810] TCP cubic registered
[ 0.508920] NET: Registered protocol family 10
[ 0.509492] NET: Registered protocol family 17
[ 0.509535] Using IPI No-Shortcut mode
[ 0.509582] PM: Resume from disk failed.
[ 0.509589] registered taskstats version 1
[ 0.509965] Magic number: 8:480:962
[ 0.510015] rtc_cmos 00:03: setting system clock to 2012-08-27 00:59:29 UTC (1346029169)
[ 0.510021] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.510023] EDD information not available.
[ 0.797340] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.807828] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.819404] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 0.824918] isapnp: No Plug & Play device found
[ 0.953239] usb 1-2: configuration #1 chosen from 1 choice
[ 1.276556] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.276566] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.276770] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.276780] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.276789] ata2.01: link offline, clearing class 3 to NONE
[ 1.284364] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
[ 1.284908] ata1.00: ATA-8: WDC WD5000AVDS-63U7B0, 01.00A01, max UDMA/133
[ 1.284911] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.292930] ata1.00: configured for UDMA/133
[ 1.293037] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AVDS-6 01.0 PQ: 0 ANSI: 5
[ 1.293163] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.293174] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.293196] sd 0:0:0:0: [sda] Write Protect is off
[ 1.293198] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.293220] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.293309] sda:
[ 1.300218] ata2.00: configured for UDMA/100
[ 1.308777] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
[ 1.330496] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.330499] Uniform CD-ROM driver Revision: 3.20
[ 1.330580] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.330615] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.358753] sda1 sda2 < sda5
[ 1.384008] usb 8-1: new low speed USB device using uhci_hcd and address 2
[ 1.398639] sda6 >
[ 1.398864] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.398875] Freeing unused kernel memory: 680k freed
[ 1.399097] Write protecting the kernel text: 4856k
[ 1.399168] Write protecting the kernel read-only data: 1888k
[ 1.411420] udev: starting version 151
[ 1.428112] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.428138] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.450851] scsi4 : pata_jmicron
[ 1.458608] scsi5 : pata_jmicron
[ 1.459187] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
[ 1.459189] ata6: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
[ 1.459238] ahci 0000:03:00.0: version 3.0
[ 1.459260] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.459292] ahci 0000:03:00.0: JMB361 has only one port, port_map 0x3 -> 0x1
[ 1.461319] Initializing USB Mass Storage driver...
[ 1.463249] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.463260] ATL1E 0000:02:00.0: setting latency timer to 64
[ 1.463403] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.463505] usbcore: registered new interface driver usb-storage
[ 1.463507] USB Mass Storage support registered.
[ 1.463572] usb-storage: device found at 2
[ 1.463573] usb-storage: waiting for device to settle before scanning
[ 1.465455] ohci1394 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.465461] ohci1394 0000:04:00.0: setting latency timer to 64
[ 1.473045] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 1.473049] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.473055] ahci 0000:03:00.0: setting latency timer to 64
[ 1.473127] scsi7 : ahci
[ 1.473212] scsi8 : ahci
[ 1.473287] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 1.473289] ata8: DUMMY
[ 1.521953] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[febff800-febfffff] Max Packet=[512] IR/IT contexts=[4/4]
[ 1.565581] usb 8-1: configuration #1 chosen from 1 choice
[ 1.750255] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 1.800025] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.812010] usb 8-2: new low speed USB device using uhci_hcd and address 3
[ 1.818970] usbcore: registered new interface driver hiddev
[ 1.832721] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
[ 1.832785] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.2-1/input0
[ 1.832806] usbcore: registered new interface driver usbhid
[ 1.832809] usbhid: v2.6:USB HID core driver
[ 2.072619] usb 8-2: configuration #1 chosen from 1 choice
[ 2.123747] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4
[ 2.123794] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.2-2/input0
[ 2.216630] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input5
[ 2.216676] generic-usb 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.2-2/input1
[ 2.801624] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000be3e42]
[ 6.460142] usb-storage: device scan complete
[ 6.460646] scsi 6:0:0:0: Direct-Access USBDisk RunDisk 1.00 PQ: 0 ANSI: 2
[ 6.461092] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.461627] sd 6:0:0:0: [sdb] 2002000 512-byte logical blocks: (1.02 GB/977 MiB)
[ 6.462125] sd 6:0:0:0: [sdb] Write Protect is off
[ 6.462127] sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 6.462129] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.464125] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.464129] sdb: sdb1
[ 6.466124] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.466126] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 20.259744] udev: starting version 151
[ 20.417244] Adding 4016208k swap on /dev/sda6. Priority:-1 extents:1 across:4016208k
[ 20.503525] type=1505 audit(1346018389.491:2): operation="profile_load" pid=612 name="/sbin/dhclient3"
[ 20.503532] type=1505 audit(1346018389.491:3): operation="profile_replace" pid=609 name="/sbin/dhclient3"
[ 20.504036] type=1505 audit(1346018389.491:4): operation="profile_load" pid=612 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 20.504051] type=1505 audit(1346018389.491:5): operation="profile_replace" pid=609 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 20.504318] type=1505 audit(1346018389.491:6): operation="profile_load" pid=612 name="/usr/lib/connman/scripts/dhclient-script"
[ 20.504337] type=1505 audit(1346018389.491:7): operation="profile_replace" pid=609 name="/usr/lib/connman/scripts/dhclient-script"
[ 20.554130] lp: driver loaded but no devices found
[ 20.565167] parport_pc 00:06: reported by Plug and Play ACPI
[ 20.565289] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 20.578588] ppdev: user-space parallel port driver
[ 20.632935] vga16fb: initializing
[ 20.632938] vga16fb: mapped to 0xc00a0000
[ 20.632979] fb0: VGA16 VGA frame buffer device
[ 20.644754] Linux agpgart interface v0.103
[ 20.661151] lp0: using parport0 (interrupt-driven).
[ 20.725459] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 20.725463] Disabling lock debugging due to kernel taint
[ 20.806900] [fglrx] Maximum main memory to use for locked dma buffers: 3861 MBytes.
[ 20.806966] [fglrx] vendor: 1002 device: 68d9 count: 1
[ 20.807355] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[ 20.807366] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.807369] pci 0000:01:00.0: setting latency timer to 64
[ 20.807714] [fglrx] Kernel PAT support is enabled
[ 20.807731] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors
[ 20.924940] Console: switching to colour frame buffer device 80x30
[ 21.546022] type=1505 audit(1346018390.533:8): operation="profile_load" pid=890 name="/usr/share/gdm/guest-session/Xsession"
[ 21.546218] type=1505 audit(1346018390.533:9): operation="profile_replace" pid=891 name="/sbin/dhclient3"
[ 21.546746] type=1505 audit(1346018390.533:10): operation="profile_replace" pid=891 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 21.546756] type=1505 audit(1346018390.533:11): operation="profile_load" pid=893 name="/usr/lib/cups/backend/cups-pdf"
[ 21.802475] alloc irq_desc for 22 on node -1
[ 21.802478] alloc kstat_irqs on node -1
[ 21.802483] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 21.802508] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 21.991040] hda_codec: ALC887: BIOS auto-probing.
[ 21.992453] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 21.999941] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 21.999964] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 22.658155] alloc irq_desc for 29 on node -1
[ 22.658157] alloc kstat_irqs on node -1
[ 22.658165] fglrx_pci 0000:01:00.0: irq 29 for MSI/MSI-X
[ 22.658829] [fglrx] Firegl kernel thread PID: 1213
[ 22.659022] [fglrx] IRQ 29 Enabled
[ 22.773192] [fglrx] Gart USWC size:1256 M.
[ 22.773195] [fglrx] Gart cacheable size:499 M.
[ 22.773199] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 22.773201] [fglrx] Reserved FB block: Unshared offset:f911000, size:3ef000
[ 22.773203] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 25.627086] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 90.357171] alloc irq_desc for 30 on node -1
[ 90.357174] alloc kstat_irqs on node -1
[ 90.357185] ATL1E 0000:02:00.0: irq 30 for MSI/MSI-X
[ 90.357294] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 100.632004] eth0: no IPv6 routers present

ειναι φυσικα οι τελευταιες γραμμες που μου βγαζει. δεν μπορω να κανω αλλο scroll up. δεν ξερω αν θα βοηθουσε να το εβλεπες ολο απο την αρχη... ισως αν ξερεις καποια εντολη που αντι να μου τα εμφανιζει στο terminal να τα εστελνε σε καποιο αρχειο .txt