nVidia 8400M GT + HDMI problem + Brightness Problem(hotkey)  Το θέμα επιλύθηκε

...κάρτες γραφικών / προβλήματα εικόνας / τηλεοπτικοί δέκτες
Κανόνες Δ. Συζήτησης
Αν έχετε πρόβλημα με την κάρτα γραφικών σας και δεν μπορείτε να μπείτε σε γραφικό περιβάλλον,
δοκιμάστε να τρέξετε την παρακάτω εντολή για να ελέγξετε αν το σύστημά σας χρειάζεται πρόσθετους κλειστούς οδηγούς:
jockey-text

Για κάρτα τηλεόρασης δώστε τα αποτελέσματα των παρακάτω εντολών :
lspci -nn (Για εσωτερικές κάρτες pci)
lsusb (Για εξωτερικές κάρτες με σύνδεση usb)

Re: nVidia 8400M GT + HDMI problem + Brightness Problem(hotk

Δημοσίευσηαπό pelopidass » 14 Σεπ 2012, 19:02

Κώδικας: Επιλογή όλων
[ 0.424220] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 0.424226] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.424232] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.424241] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.424381] pci 0000:06:00.0: [8086:4229] type 0 class 0x000280
[ 0.424439] pci 0000:06:00.0: reg 10: [mem 0xfa000000-0xfa001fff 64bit]
[ 0.424708] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.424724] pci 0000:06:00.0: PME# disabled
[ 0.432077] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[ 0.432084] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 0.432090] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.432099] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.432202] pci 0000:08:00.0: [11ab:4351] type 0 class 0x000200
[ 0.432237] pci 0000:08:00.0: reg 10: [mem 0xfc000000-0xfc003fff 64bit]
[ 0.432255] pci 0000:08:00.0: reg 18: [io 0x6000-0x60ff]
[ 0.432422] pci 0000:08:00.0: supports D1 D2
[ 0.432425] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.432432] pci 0000:08:00.0: PME# disabled
[ 0.440049] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.440055] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.440061] pci 0000:00:1c.4: bridge window [mem 0xfc000000-0xfc0fffff]
[ 0.440130] pci 0000:09:03.0: [104c:8039] type 2 class 0x000607
[ 0.440158] pci 0000:09:03.0: reg 10: [mem 0xfc100000-0xfc100fff]
[ 0.440206] pci 0000:09:03.0: supports D1 D2
[ 0.440209] pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.440216] pci 0000:09:03.0: PME# disabled
[ 0.440243] pci 0000:09:03.1: [104c:803a] type 0 class 0x000c00
[ 0.440272] pci 0000:09:03.1: reg 10: [mem 0xfc102000-0xfc1027ff]
[ 0.440288] pci 0000:09:03.1: reg 14: [mem 0xfc104000-0xfc107fff]
[ 0.440403] pci 0000:09:03.1: supports D1 D2
[ 0.440405] pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.440411] pci 0000:09:03.1: PME# disabled
[ 0.440438] pci 0000:09:03.2: [104c:803b] type 0 class 0x000180
[ 0.440465] pci 0000:09:03.2: reg 10: [mem 0xfc101000-0xfc101fff]
[ 0.440588] pci 0000:09:03.2: supports D1 D2
[ 0.440591] pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot
[ 0.440597] pci 0000:09:03.2: PME# disabled
[ 0.440673] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] (subtractive decode)
[ 0.440682] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc1fffff]
[ 0.440691] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.440694] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.440753] pci_bus 0000:0a: [bus 0a-0d] partially hidden behind transparent bridge 0000:09 [bus 09-0a]
[ 0.440795] pci_bus 0000:00: on NUMA node 0
[ 0.440803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.441048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.441225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.441333] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.441440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.441547] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.441838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.442143] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.442275] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x00
[ 0.442278] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.456199] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.456261] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.456321] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.456381] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.456442] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.456501] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.456559] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.456617] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.456785] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.456792] vgaarb: loaded
[ 0.456794] vgaarb: bridge control possible 0000:01:00.0
[ 0.456938] i2c-core: driver [aat2870] using legacy suspend method
[ 0.456940] i2c-core: driver [aat2870] using legacy resume method
[ 0.457039] SCSI subsystem initialized
[ 0.457107] libata version 3.00 loaded.
[ 0.457166] usbcore: registered new interface driver usbfs
[ 0.457181] usbcore: registered new interface driver hub
[ 0.457213] usbcore: registered new device driver usb
[ 0.457323] PCI: Using ACPI for IRQ routing
[ 0.469104] PCI: pci_cache_line_size set to 64 bytes
[ 0.469298] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.469301] reserve RAM buffer: 000000007fed0000 - 000000007fffffff
[ 0.469447] NetLabel: Initializing
[ 0.469450] NetLabel: domain hash size = 128
[ 0.469451] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.469467] NetLabel: unlabeled traffic allowed by default
[ 0.469537] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.469544] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.469550] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.476099] Switching to clocksource hpet
[ 0.486203] AppArmor: AppArmor Filesystem Enabled
[ 0.486239] pnp: PnP ACPI init
[ 0.486262] ACPI: bus type pnp registered
[ 0.487017] Freeing initrd memory: 13824k freed
[ 0.493226] pnp 00:00: [bus 00-ff]
[ 0.493235] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.493239] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.493241] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.493244] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.493247] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.493250] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.493253] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.493256] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.493258] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.493261] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.493264] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.493267] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.493270] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.493273] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.493275] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.493278] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.493281] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.493284] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[ 0.493287] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.493290] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.493458] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.493565] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.493568] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.493570] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.493573] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.493575] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.493578] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.493581] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.493583] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.493702] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.493706] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.493709] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.493712] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.493716] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.493719] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.493722] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.493726] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.493730] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.493984] pnp 00:02: [io 0x0000-0x001f]
[ 0.493987] pnp 00:02: [io 0x0081-0x0091]
[ 0.493989] pnp 00:02: [io 0x0093-0x009f]
[ 0.493992] pnp 00:02: [io 0x00c0-0x00df]
[ 0.493995] pnp 00:02: [dma 4]
[ 0.494056] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.494068] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.494126] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.494217] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.494305] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.494309] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.494323] pnp 00:05: [io 0x00f0]
[ 0.494339] pnp 00:05: [irq 13]
[ 0.494394] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.494408] pnp 00:06: [io 0x002e-0x002f]
[ 0.494410] pnp 00:06: [io 0x004e-0x004f]
[ 0.494413] pnp 00:06: [io 0x0061]
[ 0.494415] pnp 00:06: [io 0x0063]
[ 0.494417] pnp 00:06: [io 0x0065]
[ 0.494419] pnp 00:06: [io 0x0067]
[ 0.494421] pnp 00:06: [io 0x0080]
[ 0.494424] pnp 00:06: [io 0x0092]
[ 0.494426] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.494428] pnp 00:06: [io 0x0680-0x069f]
[ 0.494431] pnp 00:06: [io 0x0800-0x080f]
[ 0.494436] pnp 00:06: [io 0x1000-0x107f]
[ 0.494438] pnp 00:06: [io 0x1180-0x11bf]
[ 0.494441] pnp 00:06: [io 0x1640-0x164f]
[ 0.494443] pnp 00:06: [io 0xfe00-0xfe7f]
[ 0.494445] pnp 00:06: [io 0xfe80-0xfeff]
[ 0.494543] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.494546] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.494550] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.494553] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.494556] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.494559] system 00:06: [io 0xfe00-0xfe7f] has been reserved
[ 0.494562] system 00:06: [io 0xfe80-0xfeff] has been reserved
[ 0.494566] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.494577] pnp 00:07: [io 0x0070-0x0077]
[ 0.494584] pnp 00:07: [irq 8]
[ 0.494638] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.494656] pnp 00:08: [io 0x0060]
[ 0.494658] pnp 00:08: [io 0x0064]
[ 0.494664] pnp 00:08: [irq 1]
[ 0.494720] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.494734] pnp 00:09: [irq 12]
[ 0.494793] pnp 00:09: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[ 0.494817] pnp: PnP ACPI: found 10 devices
[ 0.494819] ACPI: ACPI bus type pnp unregistered
[ 0.494824] PnPBIOS: Disabled by ACPI PNP
[ 0.532497] PCI: max bus depth: 2 pci_try_num: 3
[ 0.532567] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80000000-0x800000ff]
[ 0.532575] pci 0000:00:1f.3: BAR 0: set to [mem 0x80000000-0x800000ff] (PCI address [0x80000000-0x800000ff])
[ 0.532580] pci 0000:00:1e.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[ 0.532585] pci 0000:00:1e.0: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.532589] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref]
[ 0.532593] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.532597] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.532600] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.532604] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.532608] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.532614] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.532618] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.532625] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.532631] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.532640] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 0.532644] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.532651] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.532657] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.532666] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[ 0.532670] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 0.532677] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.532683] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.532692] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.532696] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.532703] pci 0000:00:1c.4: bridge window [mem 0xfc000000-0xfc0fffff]
[ 0.532709] pci 0000:00:1c.4: bridge window [mem 0x80100000-0x802fffff 64bit pref]
[ 0.532721] pci 0000:09:03.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.532724] pci 0000:09:03.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[ 0.532728] pci 0000:09:03.0: BAR 14: assigned [io 0x7000-0x70ff]
[ 0.532731] pci 0000:09:03.0: BAR 13: assigned [io 0x7400-0x74ff]
[ 0.532734] pci 0000:09:03.0: CardBus bridge to [bus 0a-0d]
[ 0.532736] pci 0000:09:03.0: bridge window [io 0x7400-0x74ff]
[ 0.532742] pci 0000:09:03.0: bridge window [io 0x7000-0x70ff]
[ 0.532749] pci 0000:09:03.0: bridge window [mem 0x84000000-0x87ffffff pref]
[ 0.532755] pci 0000:09:03.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.532761] pci 0000:00:1e.0: PCI bridge to [bus 09-0a]
[ 0.532765] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff]
[ 0.532772] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc1fffff]
[ 0.532777] pci 0000:00:1e.0: bridge window [mem 0x84000000-0x87ffffff pref]
[ 0.532799] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.532804] pci 0000:00:01.0: setting latency timer to 64
[ 0.532817] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.532822] pci 0000:00:1c.0: setting latency timer to 64
[ 0.532831] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.532836] pci 0000:00:1c.1: setting latency timer to 64
[ 0.532848] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.532854] pci 0000:00:1c.2: setting latency timer to 64
[ 0.532862] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.532868] pci 0000:00:1c.4: setting latency timer to 64
[ 0.532877] pci 0000:00:1e.0: setting latency timer to 64
[ 0.532887] pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.532895] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.532897] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.532900] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.532903] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[ 0.532906] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.532909] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.532912] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.532914] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.532917] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.532920] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.532923] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.532925] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.532928] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.532931] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.532934] pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
[ 0.532936] pci_bus 0000:08: resource 1 [mem 0xfc000000-0xfc0fffff]
[ 0.532939] pci_bus 0000:08: resource 2 [mem 0x80100000-0x802fffff 64bit pref]
[ 0.532942] pci_bus 0000:09: resource 0 [io 0x7000-0x7fff]
[ 0.532945] pci_bus 0000:09: resource 1 [mem 0xfc100000-0xfc1fffff]
[ 0.532947] pci_bus 0000:09: resource 2 [mem 0x84000000-0x87ffffff pref]
[ 0.532950] pci_bus 0000:09: resource 4 [io 0x0000-0xffff]
[ 0.532953] pci_bus 0000:09: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.532955] pci_bus 0000:0a: resource 0 [io 0x7400-0x74ff]
[ 0.532958] pci_bus 0000:0a: resource 1 [io 0x7000-0x70ff]
[ 0.532961] pci_bus 0000:0a: resource 2 [mem 0x84000000-0x87ffffff pref]
[ 0.532963] pci_bus 0000:0a: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.533015] NET: Registered protocol family 2
[ 0.533097] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.533390] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.533856] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.534053] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.534056] TCP reno registered
[ 0.534059] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.534068] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.534137] NET: Registered protocol family 1
[ 0.534167] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.534190] pci 0000:00:1a.0: PCI INT A disabled
[ 0.534208] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.534229] pci 0000:00:1a.1: PCI INT B disabled
[ 0.534240] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.534274] pci 0000:00:1a.7: PCI INT C disabled
[ 0.534301] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.534322] pci 0000:00:1d.0: PCI INT A disabled
[ 0.534334] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.534355] pci 0000:00:1d.1: PCI INT B disabled
[ 0.534364] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.534385] pci 0000:00:1d.2: PCI INT C disabled
[ 0.534395] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.534415] pci 0000:00:1d.7: PCI INT A disabled
[ 0.534493] PCI: CLS 64 bytes, default 64
[ 0.534501] Simple Boot Flag at 0x36 set to 0x1
[ 0.534936] audit: initializing netlink socket (disabled)
[ 0.534948] type=2000 audit(1347582001.528:1): initialized
[ 0.562606] highmem bounce pool size: 64 pages
[ 0.562613] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.571394] VFS: Disk quotas dquot_6.5.2
[ 0.571479] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.572179] fuse init (API version 7.17)
[ 0.572296] msgmni has been set to 1712
[ 0.572744] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.572779] io scheduler noop registered
[ 0.572782] io scheduler deadline registered
[ 0.572790] io scheduler cfq registered (default)
[ 0.572935] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.572974] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.573034] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.573094] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.573181] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.573240] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.573327] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.573386] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.573475] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.573534] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.573648] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.573680] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.573782] intel_idle: MWAIT substates: 0x22220
[ 0.573785] intel_idle: does not run on family 6 model 15
[ 0.574415] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.575064] ACPI: AC Adapter [ADP1] (on-line)
[ 0.575184] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.576861] ACPI: Lid Switch [LID0]
[ 0.576948] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.576954] ACPI: Power Button [PWRB]
[ 0.580668] Monitor-Mwait will be used to enter C-1 state
[ 0.580704] Monitor-Mwait will be used to enter C-2 state
[ 0.580738] Monitor-Mwait will be used to enter C-3 state
[ 0.580747] Marking TSC unstable due to TSC halts in idle
[ 0.580762] ACPI: acpi_idle registered with cpuidle
[ 0.591509] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.591512] ACPI: Thermal Zone [TZ00] (61 C)
[ 0.592230] ACPI: Invalid active0 threshold
[ 0.592928] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.592931] ACPI: Thermal Zone [TZ01] (61 C)
[ 0.592983] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.592992] ACPI: Battery Slot [BAT0] (battery present)
[ 0.593034] ERST: Table is not found!
[ 0.593036] GHES: HEST is not enabled!
[ 0.593085] isapnp: Scanning for PnP cards...
[ 0.600105] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.625901] ACPI: Battery Slot [BAT0] (battery present)
[ 0.947286] isapnp: No Plug & Play device found
[ 1.000506] Linux agpgart interface v0.103
[ 1.002602] brd: module loaded
[ 1.003565] loop: module loaded
[ 1.003718] ahci 0000:00:1f.2: version 3.0
[ 1.003732] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.003784] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.003848] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[ 1.003852] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 1.003858] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.004305] scsi0 : ahci
[ 1.004416] scsi1 : ahci
[ 1.004515] scsi2 : ahci
[ 1.004619] ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 45
[ 1.004621] ata2: DUMMY
[ 1.004623] ata3: DUMMY
[ 1.004681] ata_piix 0000:00:1f.1: version 2.13
[ 1.004691] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.004728] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.005110] scsi3 : ata_piix
[ 1.005199] scsi4 : ata_piix
[ 1.005705] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 1.005709] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 1.006171] Fixed MDIO Bus: probed
[ 1.006195] tun: Universal TUN/TAP device driver, 1.6
[ 1.006198] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.006364] PPP generic driver version 2.4.2
[ 1.006493] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.006513] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.006529] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.006533] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.006593] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.006624] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.010506] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.010524] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
[ 1.024022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.024180] hub 1-0:1.0: USB hub found
[ 1.024186] hub 1-0:1.0: 4 ports detected
[ 1.024278] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.024292] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.024296] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.024354] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.024383] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.028269] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.028286] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
[ 1.044020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.044177] hub 2-0:1.0: USB hub found
[ 1.044181] hub 2-0:1.0: 6 ports detected
[ 1.044280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.044298] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.044319] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.044328] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.044332] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.044388] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.044429] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 1.044588] hub 3-0:1.0: USB hub found
[ 1.044593] hub 3-0:1.0: 2 ports detected
[ 1.044678] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.044687] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.044691] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.044745] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.044786] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 1.044937] hub 4-0:1.0: USB hub found
[ 1.044941] hub 4-0:1.0: 2 ports detected
[ 1.045026] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.045035] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.045039] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.045091] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.045120] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 1.045270] hub 5-0:1.0: USB hub found
[ 1.045274] hub 5-0:1.0: 2 ports detected
[ 1.045357] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.045366] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.045370] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.045429] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.045469] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 1.045624] hub 6-0:1.0: USB hub found
[ 1.045628] hub 6-0:1.0: 2 ports detected
[ 1.045715] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.045724] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.045728] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.045781] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.045811] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 1.045960] hub 7-0:1.0: USB hub found
[ 1.045965] hub 7-0:1.0: 2 ports detected
[ 1.046109] usbcore: registered new interface driver libusual
[ 1.046166] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.049831] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.049838] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.050006] mousedev: PS/2 mouse device common for all mice
[ 1.050251] rtc_cmos 00:07: RTC can wake from S4
[ 1.050395] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.050429] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.050495] device-mapper: uevent: version 1.0.3
[ 1.050589] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.050630] EISA: Probing bus 0 at eisa.0
[ 1.050637] Cannot allocate resource for EISA slot 1
[ 1.050640] Cannot allocate resource for EISA slot 2
[ 1.050643] Cannot allocate resource for EISA slot 3
[ 1.050645] Cannot allocate resource for EISA slot 4
[ 1.050647] Cannot allocate resource for EISA slot 5
[ 1.050649] Cannot allocate resource for EISA slot 6
[ 1.050652] Cannot allocate resource for EISA slot 7
[ 1.050658] EISA: Detected 0 cards.
[ 1.050669] cpufreq-nforce2: No nForce2 chipset.
[ 1.050760] cpuidle: using governor ladder
[ 1.050892] cpuidle: using governor menu
[ 1.050895] EFI Variables Facility v0.08 2004-May-17
[ 1.051228] TCP cubic registered
[ 1.051368] NET: Registered protocol family 10
[ 1.052081] NET: Registered protocol family 17
[ 1.052086] Registering the dns_resolver key type
[ 1.052112] Using IPI No-Shortcut mode
[ 1.052334] PM: Hibernation image not present or could not be loaded.
[ 1.052350] registered taskstats version 1
[ 1.055908] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.063787] Magic number: 12:337:304
[ 1.063826] tty tty33: hash matches
[ 1.063899] rtc_cmos 00:07: setting system clock to 2012-09-14 00:20:02 UTC (1347582002)
[ 1.064510] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.064512] EDD information not available.
[ 1.171423] ata4.00: ATAPI: MATSHITABD-CMB UJ-120, 1.04, max UDMA/33
[ 1.184387] ata4.00: configured for UDMA/33
[ 1.324083] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.324754] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 1.324758] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.325250] ata1.00: ATA-8: FUJITSU MHY2200BH, 0000000B, max UDMA/100
[ 1.325253] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.326050] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 1.326055] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.326546] ata1.00: configured for UDMA/100
[ 1.326740] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0000 PQ: 0 ANSI: 5
[ 1.326915] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.326939] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.326969] sd 0:0:0:0: [sda] Write Protect is off
[ 1.326972] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.326996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.329099] scsi 3:0:0:0: CD-ROM MATSHITA BD-CMB UJ-120 1.04 PQ: 0 ANSI: 5
[ 1.332176] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.332180] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.332336] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.332473] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.336047] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[ 1.380829] sda: sda1 sda2 < sda5 >
[ 1.381478] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.381628] Freeing unused kernel memory: 740k freed
[ 1.381975] Write protecting the kernel text: 5816k
[ 1.382009] Write protecting the kernel read-only data: 2376k
[ 1.382011] NX-protecting the kernel data: 4424k
[ 1.401216] udevd[100]: starting version 175
[ 1.482656] sky2: driver version 1.30
[ 1.482701] sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.482718] sky2 0000:08:00.0: setting latency timer to 64
[ 1.482751] sky2 0000:08:00.0: Yukon-2 FE chip revision 1
[ 1.482862] sky2 0000:08:00.0: irq 46 for MSI/MSI-X
[ 1.483557] sky2 0000:08:00.0: eth0: addr 00:1a:80:1e:30:49
[ 1.494798] firewire_ohci 0000:09:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.548118] firewire_ohci: Added fw-ohci device 0000:09:03.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.761132] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.880053] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[ 2.048199] firewire_core: created device fw0: GUID 08004603027af374, S400
[ 2.304062] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[ 2.478935] hub 7-1:1.0: USB hub found
[ 2.480874] hub 7-1:1.0: 3 ports detected
[ 2.761887] usb 7-1.1: new full-speed USB device number 3 using uhci_hcd
[ 2.973883] usb 7-1.2: new full-speed USB device number 4 using uhci_hcd
[ 3.169884] usb 7-1.3: new full-speed USB device number 5 using uhci_hcd
[ 16.755770] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.858832] udevd[315]: starting version 175
[ 17.121898] Adding 2094076k swap on /dev/sda5. Priority:-1 extents:1 across:2094076k
[ 17.758161] lp: driver loaded but no devices found
[ 18.060846] wmi: Mapper loaded
[ 18.159720] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 18.189117] [drm] Initialized drm 1.1.0 20060810
[ 18.269237] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[ 18.269247] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.269256] nouveau 0000:01:00.0: setting latency timer to 64
[ 18.270973] [drm] nouveau 0000:01:00.0: Unsupported chipset 0xffffffff
[ 18.271828] nouveau 0000:01:00.0: PCI INT A disabled
[ 18.271834] nouveau: probe of 0000:01:00.0 failed with error -22
[ 18.713550] cfg80211: Calling CRDA to update world regulatory domain
[ 18.809786] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 18.809790] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 18.809871] iwl4965 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 18.809927] iwl4965 0000:06:00.0: setting latency timer to 64
[ 18.809985] iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 18.852686] iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 18.853129] iwl4965 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 18.853296] iwl4965 0000:06:00.0: irq 47 for MSI/MSI-X
[ 19.133803] Linux video capture interface: v2.00
[ 19.149151] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[ 19.149913] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input3
[ 19.150053] usbcore: registered new interface driver uvcvideo
[ 19.150056] USB Video Class driver (1.1.1)
[ 19.204147] usbcore: deregistering interface driver uvcvideo
[ 19.253017] sony_laptop: Sony Notebook Control Driver v0.6
[ 19.258224] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:28/SNY5001:00/input/input4
[ 19.259058] input: Sony Vaio Jogdial as /devices/virtual/input/input5
[ 19.269856] Linux video capture interface: v2.00
[ 19.271095] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[ 19.272034] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input6
[ 19.272254] usbcore: registered new interface driver uvcvideo
[ 19.272257] USB Video Class driver (1.1.1)
[ 19.285782] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
[ 19.302358] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[ 19.304046] usbcore: deregistering interface driver uvcvideo
[ 19.347638] Linux video capture interface: v2.00
[ 19.348654] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[ 19.349623] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
[ 19.349815] usbcore: registered new interface driver uvcvideo
[ 19.349817] USB Video Class driver (1.1.1)
[ 19.425174] iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24
[ 19.425391] Registered led device: phy0-led
[ 19.425428] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 19.492433] tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 19.494352] yenta_cardbus 0000:09:03.0: CardBus bridge found [104d:9005]
[ 19.494376] yenta_cardbus 0000:09:03.0: Enabling burst memory read transactions
[ 19.494383] yenta_cardbus 0000:09:03.0: Using CSCINT to route CSC interrupts to PCI
[ 19.494385] yenta_cardbus 0000:09:03.0: Routing CardBus interrupts to PCI
[ 19.494392] yenta_cardbus 0000:09:03.0: TI: mfunc 0x01121b22, devctl 0x64
[ 19.724842] yenta_cardbus 0000:09:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 19.724848] yenta_cardbus 0000:09:03.0: Socket status: 30000006
[ 19.724852] pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d
[ 19.724863] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [io 0x7000-0x7fff]
[ 19.724867] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: excluding 0x7000-0x70ff 0x7400-0x74ff
[ 19.732066] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [mem 0xfc100000-0xfc1fffff]
[ 19.732070] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfc100000-0xfc1fffff: excluding 0xfc100000-0xfc10ffff
[ 19.732088] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [mem 0x84000000-0x87ffffff pref]
[ 19.732092] pcmcia_socket pcmcia_socket0: cs: memory probe 0x84000000-0x87ffffff: excluding 0x84000000-0x87ffffff
[ 19.784272] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 19.784276] cfg80211: World regulatory domain updated:
[ 19.784278] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.784282] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.784285] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.784288] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.784291] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.784294] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.786854] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input10
[ 19.786993] generic-usb 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2/input0
[ 19.790440] input: HID 044e:3013 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.2/7-1.2:1.0/input/input11
[ 19.790539] generic-usb 0003:044E:3013.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 044e:3013] on usb-0000:00:1d.2-1.2/input0
[ 19.795956] input: HID 044e:3012 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.3/7-1.3:1.0/input/input12
[ 19.796469] generic-usb 0003:044E:3012.0003: input,hidraw2: USB HID v1.11 Mouse [HID 044e:3012] on usb-0000:00:1d.2-1.3/input0
[ 19.796609] usbcore: registered new interface driver usbhid
[ 19.796612] usbhid: USB HID core driver
[ 19.816503] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 19.816573] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 19.816608] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 19.892888] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 20.067087] Bluetooth: Core ver 2.16
[ 20.067152] NET: Registered protocol family 31
[ 20.067155] Bluetooth: HCI device and connection manager initialized
[ 20.067158] Bluetooth: HCI socket layer initialized
[ 20.067161] Bluetooth: L2CAP socket layer initialized
[ 20.067436] Bluetooth: SCO socket layer initialized
[ 20.072909] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 20.073012] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 20.096628] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 20.097413] usbcore: registered new interface driver btusb
[ 20.114862] usb 7-1.2: input irq status -75 received
[ 20.130868] usb 7-1.2: input irq status -75 received
[ 20.132113] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 20.134196] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 20.135063] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 20.135765] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 20.136595] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 20.136630] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 20.136664] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 20.136695] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 20.146869] usb 7-1.2: input irq status -75 received
[ 20.162861] usb 7-1.2: input irq status -75 received
[ 20.178875] usb 7-1.2: input irq status -75 received
[ 20.194874] usb 7-1.2: input irq status -75 received
[ 20.210859] usb 7-1.2: input irq status -75 received
[ 20.226883] usb 7-1.2: input irq status -75 received
[ 20.242879] usb 7-1.2: input irq status -75 received
[ 20.258877] usb 7-1.2: input irq status -75 received
[ 20.659765] nvidia: module license 'NVIDIA' taints kernel.
[ 20.659771] Disabling lock debugging due to kernel taint
[ 21.026203] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.026216] nvidia 0000:01:00.0: setting latency timer to 64
[ 21.026223] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 21.026259] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0426) installed
[ 21.026261] NVRM: in this system is not supported by the 304.43 NVIDIA Linux
[ 21.026262] NVRM: graphics driver release. Please see 'Appendix A -
[ 21.026263] NVRM: Supported NVIDIA GPU Products' in this release's README,
[ 21.026265] NVRM: available on the Linux graphics driver download page at
[ 21.026266] NVRM: www.nvidia.com.
[ 21.026275] nvidia 0000:01:00.0: PCI INT A disabled
[ 21.026284] nvidia: probe of 0000:01:00.0 failed with error -1
[ 21.026314] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 21.026316] NVRM: None of the NVIDIA graphics adapters were initialized!
[ 21.522950] type=1400 audit(1347582022.954:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=765 comm="apparmor_parser"
[ 21.522961] type=1400 audit(1347582022.954:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=803 comm="apparmor_parser"
[ 21.523433] type=1400 audit(1347582022.954:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=765 comm="apparmor_parser"
[ 21.523446] type=1400 audit(1347582022.954:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=803 comm="apparmor_parser"
[ 21.523703] type=1400 audit(1347582022.954:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=765 comm="apparmor_parser"
[ 21.523719] type=1400 audit(1347582022.954:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=803 comm="apparmor_parser"
[ 21.524511] type=1400 audit(1347582022.958:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=764 comm="apparmor_parser"
[ 21.525005] type=1400 audit(1347582022.958:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=764 comm="apparmor_parser"
[ 21.525296] type=1400 audit(1347582022.958:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=764 comm="apparmor_parser"
[ 21.975599] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 21.975602] vesafb: scrolling: redraw
[ 21.975605] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 21.977484] vesafb: framebuffer at 0xcd000000, mapped to 0xf8980000, using 1216k, total 1216k
[ 21.977662] Console: switching to colour frame buffer device 80x30
[ 21.977677] fb0: VESA VGA frame buffer device
[ 21.994462] ppdev: user-space parallel port driver
[ 22.244163] Bluetooth: RFCOMM TTY layer initialized
[ 22.244170] Bluetooth: RFCOMM socket layer initialized
[ 22.244172] Bluetooth: RFCOMM ver 1.11
[ 22.263763] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.263767] Bluetooth: BNEP filters: protocol multicast
[ 22.503432] init: failsafe main process (893) killed by TERM signal
[ 23.331090] type=1400 audit(1347582024.762:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=979 comm="apparmor_parser"
[ 25.093780] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.094330] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.101452] sky2 0000:08:00.0: eth0: enabling interface
[ 25.104887] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.105704] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.737003] kvm: disabled by bios
[ 25.812647] init: qemu-kvm pre-start process (1069) terminated with status 1
[ 25.882919] init: libvirt-bin main process (1126) terminated with status 127
[ 25.882953] init: libvirt-bin main process ended, respawning
[ 27.402317] init: plymouth-upstart-bridge main process (882) killed by TERM signal
[ 31.889371] wlan0: authenticate with 02:1e:58:07:fe:06 (try 1)
[ 31.891170] wlan0: authenticated
[ 31.909916] wlan0: associate with 02:1e:58:07:fe:06 (try 1)
[ 31.912304] wlan0: RX AssocResp from 02:1e:58:07:fe:06 (capab=0x411 status=0 aid=3)
[ 31.912308] wlan0: associated
[ 31.939025] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 43.136070] wlan0: no IPv6 routers present
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.3-030503-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201208252335 SMP Sun Aug 26 03:43:25 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fecffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fed0000-0x000000007fedffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fee3000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Sony Corporation VGN-FZ21M/VAIO, BIOS R1120J7 07/04/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7fed0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 2047M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f8090-0x000f809f] mapped at [c00f8090]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x379fffff] page 2M
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x027fa000-0x027fffff]
[ 0.000000] RAMDISK: [mem 0x36554000-0x372a1fff]
[ 0.000000] ACPI: RSDP 000f8060 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 7fed7f39 00084 (v01 Sony VAIO 20070704 PTL 00000000)
[ 0.000000] ACPI: FACP 7fedfc04 000F4 (v03 Sony VAIO 20070704 PTL 00000001)
[ 0.000000] ACPI: DSDT 7fed9217 06979 (v02 Sony VAIO 20070704 PTL 20050624)
[ 0.000000] ACPI: FACS 7fee2fc0 00040
[ 0.000000] ACPI: APIC 7fedfcf8 00068 (v01 Sony VAIO 20070704 PTL 0000005A)
[ 0.000000] ACPI: HPET 7fedfd60 00038 (v01 Sony VAIO 20070704 PTL 0000005A)
[ 0.000000] ACPI: MCFG 7fedfd98 0003C (v01 Sony VAIO 20070704 PTL 0000005A)
[ 0.000000] ACPI: SLIC 7fedfdd4 00176 (v01 Sony VAIO 20070704 PTL 01000000)
[ 0.000000] ACPI: TMOR 7fedff4a 00026 (v01 Sony VAIO 20070704 PTL 00000003)
[ 0.000000] ACPI: APIC 7fedff70 00068 (v01 Sony VAIO 20070704 PTL 00000000)
[ 0.000000] ACPI: BOOT 7fedffd8 00028 (v01 Sony VAIO 20070704 PTL 00000001)
[ 0.000000] ACPI: SSDT 7fed90fa 0011D (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.000000] ACPI: SSDT 7fed85a5 00287 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.000000] ACPI: SSDT 7fed84f1 000B4 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.000000] ACPI: SSDT 7fed7fbd 00534 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1154MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x7fecffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7fecffff]
[ 0.000000] On node 0 totalpages: 523871
[ 0.000000] free_area_init_node: node 0, pgdat c18c0340, node_mem_map f5554200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2310 pages used for memmap
[ 0.000000] HighMem zone: 293324 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bd5000 s34112 r0 d23232 u57344
[ 0.000000] pcpu-alloc: s34112 r0 d23232 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519777
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.3-030503-generic root=UUID=d4000f4c-a9db-4cd9-b0fc-d39e29a75a2e ro acpi_osi=Linux splash quiet video=vesa:off vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4191744 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007fed0)
[ 0.000000] Memory: 2049664k/2095936k available (6035k kernel code, 45820k reserved, 2976k data, 756k init, 1182536k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc18ce000 - 0xc198b000 ( 756 kB)
[ 0.000000] .data : 0xc15e4f15 - 0xc18cd100 (2976 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15e4f15 (6035 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 1 loops
[ 0.000000] Detected 1995.009 MHz processor.
[ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.01 BogoMIPS (lpj=7980036)
[ 0.008009] pid_max: default: 32768 minimum: 301
[ 0.008047] Security Framework initialized
[ 0.008067] AppArmor: AppArmor initialized
[ 0.008142] Mount-cache hash table entries: 512
[ 0.008524] Initializing cgroup subsys cpuacct
[ 0.008528] Initializing cgroup subsys memory
[ 0.008541] Initializing cgroup subsys devices
[ 0.008544] Initializing cgroup subsys freezer
[ 0.008547] Initializing cgroup subsys blkio
[ 0.008551] Initializing cgroup subsys perf_event
[ 0.008599] CPU: Physical Processor ID: 0
[ 0.008602] CPU: Processor Core ID: 0
[ 0.008607] mce: CPU supports 6 MCE banks
[ 0.008619] CPU0: Thermal monitoring enabled (TM2)
[ 0.008623] using mwait in idle threads.
[ 0.013404] ACPI: Core revision 20120320
[ 0.024036] ftrace: allocating 27068 entries in 53 pages
[ 0.040089] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040572] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080827] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
[ 0.084004] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.084004] PEBS disabled due to CPU errata.
[ 0.084004] ... version: 2
[ 0.084004] ... bit width: 40
[ 0.084004] ... generic registers: 2
[ 0.084004] ... value mask: 000000ffffffffff
[ 0.084004] ... max period: 000000007fffffff
[ 0.084004] ... fixed-purpose events: 3
[ 0.084004] ... event mask: 0000000700000003
[ 0.084004] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.084004] CPU 1 irqstacks, hard=f50d6000 soft=f50e8000
[ 0.084004] Booting Node 0, Processors #1 Ok.
[ 0.012000] Initializing CPU#1
[ 0.092099] Brought up 2 CPUs
[ 0.092106] Total of 2 processors activated (7980.03 BogoMIPS).
[ 0.094159] devtmpfs: initialized
[ 0.094159] EVM: security.selinux
[ 0.094159] EVM: security.SMACK64
[ 0.094159] EVM: security.capability
[ 0.096176] PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff] (12288 bytes)
[ 0.097975] dummy:
[ 0.098028] RTC time: 15:57:00, date: 09/14/12
[ 0.098104] NET: Registered protocol family 16
[ 0.098446] EISA bus registered
[ 0.098658] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.098662] ACPI: bus type pci registered
[ 0.098767] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.098772] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.098775] PCI: Using MMCONFIG for extended config space
[ 0.098778] PCI: Using configuration type 1 for base access
[ 0.101227] bio: create slab <bio-0> at 0
[ 0.101227] ACPI: Added _OSI(Module Device)
[ 0.101227] ACPI: Added _OSI(Processor Device)
[ 0.101227] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.101227] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.101227] ACPI: Added _OSI(Linux)
[ 0.104474] ACPI: EC: Look up EC in DSDT
[ 0.109521] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.111236] ACPI: SSDT 7fed8d75 002A1 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.111966] ACPI: Dynamic OEM Table Load:
[ 0.111972] ACPI: SSDT (null) 002A1 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.112223] ACPI: SSDT 7fed882c 004B7 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.112918] ACPI: Dynamic OEM Table Load:
[ 0.112923] ACPI: SSDT (null) 004B7 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.113463] ACPI: SSDT 7fed9016 000E4 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.114179] ACPI: Dynamic OEM Table Load:
[ 0.114185] ACPI: SSDT (null) 000E4 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.114362] ACPI: SSDT 7fed8ce3 00092 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.115058] ACPI: Dynamic OEM Table Load:
[ 0.115064] ACPI: SSDT (null) 00092 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.316151] ACPI: Interpreter enabled
[ 0.316172] ACPI: (supports S0 S3 S4 S5)
[ 0.316209] ACPI: Using IOAPIC for interrupt routing
[ 0.332991] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.342660] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.342982] ACPI: No dock devices found.
[ 0.342994] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.343873] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.345080] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.345086] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.345091] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.345097] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.345102] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.345107] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.345113] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
[ 0.345118] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
[ 0.345122] PCI: root bus 00: using default resources
[ 0.345185] PCI host bridge to bus 0000:00
[ 0.345191] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.345195] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.345217] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.345303] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[ 0.345385] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.345465] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.345542] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 0.345602] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.345679] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 0.345758] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.345793] pci 0000:00:1a.7: reg 10: [mem 0xfc404800-0xfc404bff]
[ 0.345936] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.345983] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.346015] pci 0000:00:1b.0: reg 10: [mem 0xfc400000-0xfc403fff 64bit]
[ 0.346156] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.346201] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.346349] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.346398] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[ 0.346547] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.346596] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[ 0.346745] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.346795] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[ 0.346944] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.346991] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.347068] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
[ 0.347127] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.347204] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
[ 0.347263] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.347339] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
[ 0.347417] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.347451] pci 0000:00:1d.7: reg 10: [mem 0xfc404c00-0xfc404fff]
[ 0.347594] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.347632] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.347763] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.347907] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.347917] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.348002] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[ 0.348033] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.348051] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.348069] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.348086] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.348104] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
[ 0.348179] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 0.348216] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
[ 0.348234] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
[ 0.348251] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
[ 0.348269] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
[ 0.348286] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.348304] pci 0000:00:1f.2: reg 24: [mem 0xfc404000-0xfc4047ff]
[ 0.348394] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.348429] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.348454] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.348511] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.348678] pci 0000:01:00.0: [10de:0426] type 00 class 0x030000
[ 0.348734] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
[ 0.348794] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.348853] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
[ 0.348893] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.348932] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.349221] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.349228] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.349235] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.349244] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.349326] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.349335] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.349343] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.349356] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.349439] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 0.349447] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.349456] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.349468] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.349651] pci 0000:06:00.0: [8086:4229] type 00 class 0x028000
[ 0.349748] pci 0000:06:00.0: reg 10: [mem 0xfa000000-0xfa001fff 64bit]
[ 0.350143] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.350307] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[ 0.350316] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 0.350324] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.350337] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.350457] pci 0000:08:00.0: [11ab:4351] type 00 class 0x020000
[ 0.350499] pci 0000:08:00.0: reg 10: [mem 0xfc000000-0xfc003fff 64bit]
[ 0.350521] pci 0000:08:00.0: reg 18: [io 0x6000-0x60ff]
[ 0.350714] pci 0000:08:00.0: supports D1 D2
[ 0.350719] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.360047] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.360056] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.360065] pci 0000:00:1c.4: bridge window [mem 0xfc000000-0xfc0fffff]
[ 0.360145] pci 0000:09:03.0: [104c:8039] type 02 class 0x060700
[ 0.360180] pci 0000:09:03.0: reg 10: [mem 0xfc100000-0xfc100fff]
[ 0.360237] pci 0000:09:03.0: supports D1 D2
[ 0.360242] pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.360280] pci 0000:09:03.1: [104c:803a] type 00 class 0x0c0010
[ 0.360315] pci 0000:09:03.1: reg 10: [mem 0xfc102000-0xfc1027ff]
[ 0.360336] pci 0000:09:03.1: reg 14: [mem 0xfc104000-0xfc107fff]
[ 0.360470] pci 0000:09:03.1: supports D1 D2
[ 0.360475] pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.360513] pci 0000:09:03.2: [104c:803b] type 00 class 0x018000
[ 0.360546] pci 0000:09:03.2: reg 10: [mem 0xfc101000-0xfc101fff]
[ 0.360693] pci 0000:09:03.2: supports D1 D2
[ 0.360697] pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot
[ 0.360793] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] (subtractive decode)
[ 0.360806] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc1fffff]
[ 0.360818] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.360823] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.360893] pci_bus 0000:0a: [bus 0a-0d] partially hidden behind transparent bridge 0000:09 [bus 09-0a]
[ 0.360945] pci_bus 0000:00: on NUMA node 0
[ 0.360951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.361292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.361567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.361745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.361920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.362104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.362578] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.363066] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.363285] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x00
[ 0.363288] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.385903] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.386003] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.386104] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.386201] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.386299] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.386399] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.386493] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.386588] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.388080] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.388090] vgaarb: loaded
[ 0.388093] vgaarb: bridge control possible 0000:01:00.0
[ 0.388470] SCSI subsystem initialized
[ 0.388486] libata version 3.00 loaded.
[ 0.388486] ACPI: bus type usb registered
[ 0.388486] usbcore: registered new interface driver usbfs
[ 0.388486] usbcore: registered new interface driver hub
[ 0.388486] usbcore: registered new device driver usb
[ 0.388486] PCI: Using ACPI for IRQ routing
[ 0.402607] PCI: pci_cache_line_size set to 64 bytes
[ 0.402840] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.402844] e820: reserve RAM buffer [mem 0x7fed0000-0x7fffffff]
[ 0.403016] NetLabel: Initializing
[ 0.403019] NetLabel: domain hash size = 128
[ 0.403022] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.403040] NetLabel: unlabeled traffic allowed by default
[ 0.403065] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.403065] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.403065] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.408061] Switching to clocksource hpet
[ 0.424127] AppArmor: AppArmor Filesystem Enabled
[ 0.424176] pnp: PnP ACPI init
[ 0.424205] ACPI: bus type pnp registered
[ 0.433335] pnp 00:00: [bus 00-ff]
[ 0.433342] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.433346] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.433351] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.433356] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.433361] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.433366] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.433370] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.433375] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.433380] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.433384] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.433389] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.433393] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.433398] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.433403] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.433407] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.433412] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.433416] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.433421] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[ 0.433426] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.433431] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.433551] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.433701] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.433707] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.433711] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.433715] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.433720] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.433724] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.433728] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.433733] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.433843] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.433849] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.433855] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.433861] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.433866] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.433872] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.433877] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.433883] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.433890] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.434276] pnp 00:02: [io 0x0000-0x001f]
[ 0.434281] pnp 00:02: [io 0x0081-0x0091]
[ 0.434285] pnp 00:02: [io 0x0093-0x009f]
[ 0.434290] pnp 00:02: [io 0x00c0-0x00df]
[ 0.434294] pnp 00:02: [dma 4]
[ 0.434381] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.434399] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.434480] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.434603] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.434729] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.434737] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.434760] pnp 00:05: [io 0x00f0]
[ 0.434776] pnp 00:05: [irq 13]
[ 0.434868] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.434892] pnp 00:06: [io 0x002e-0x002f]
[ 0.434897] pnp 00:06: [io 0x004e-0x004f]
[ 0.434901] pnp 00:06: [io 0x0061]
[ 0.434905] pnp 00:06: [io 0x0063]
[ 0.434909] pnp 00:06: [io 0x0065]
[ 0.434914] pnp 00:06: [io 0x0067]
[ 0.434918] pnp 00:06: [io 0x0080]
[ 0.434922] pnp 00:06: [io 0x0092]
[ 0.434926] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.434930] pnp 00:06: [io 0x0680-0x069f]
[ 0.434935] pnp 00:06: [io 0x0800-0x080f]
[ 0.434939] pnp 00:06: [io 0x1000-0x107f]
[ 0.434943] pnp 00:06: [io 0x1180-0x11bf]
[ 0.434948] pnp 00:06: [io 0x1640-0x164f]
[ 0.434952] pnp 00:06: [io 0xfe00-0xfe7f]
[ 0.434956] pnp 00:06: [io 0xfe80-0xfeff]
[ 0.435107] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.435112] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.435118] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.435123] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.435128] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.435134] system 00:06: [io 0xfe00-0xfe7f] has been reserved
[ 0.435139] system 00:06: [io 0xfe80-0xfeff] has been reserved
[ 0.435146] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.435164] pnp 00:07: [io 0x0070-0x0077]
[ 0.435174] pnp 00:07: [irq 8]
[ 0.435263] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.435291] pnp 00:08: [io 0x0060]
[ 0.435296] pnp 00:08: [io 0x0064]
[ 0.435305] pnp 00:08: [irq 1]
[ 0.435392] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.435415] pnp 00:09: [irq 12]
[ 0.435504] pnp 00:09: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[ 0.435543] pnp: PnP ACPI: found 10 devices
[ 0.435545] ACPI: ACPI bus type pnp unregistered
[ 0.435552] PnPBIOS: Disabled by ACPI PNP
[ 0.474226] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08-08] add_size 200000
[ 0.474255] pci 0000:09:03.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.474260] pci 0000:09:03.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.474267] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 09-0a] add_size 1000
[ 0.474273] pci 0000:09:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.474280] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 09-0a] add_size 4000000
[ 0.474295] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.474301] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.474306] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.474317] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.474324] pci 0000:00:1c.4: BAR 15: assigned [mem 0x84000000-0x841fffff 64bit pref]
[ 0.474332] pci 0000:00:1e.0: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.474339] pci 0000:00:1f.3: BAR 0: assigned [mem 0x84200000-0x842000ff]
[ 0.474353] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.474358] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.474364] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.474372] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.474379] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.474387] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.474394] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.474404] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.474413] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.474425] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 0.474431] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.474441] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.474450] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.474462] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[ 0.474468] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 0.474479] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.474487] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.474499] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.474506] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.474516] pci 0000:00:1c.4: bridge window [mem 0xfc000000-0xfc0fffff]
[ 0.474524] pci 0000:00:1c.4: bridge window [mem 0x84000000-0x841fffff 64bit pref]
[ 0.474540] pci 0000:09:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.474546] pci 0000:09:03.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.474551] pci 0000:09:03.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.474556] pci 0000:09:03.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.474562] pci 0000:09:03.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.474569] pci 0000:09:03.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.474574] pci 0000:09:03.0: BAR 13: assigned [io 0x7000-0x70ff]
[ 0.474579] pci 0000:09:03.0: BAR 14: assigned [io 0x7400-0x74ff]
[ 0.474585] pci 0000:09:03.0: CardBus bridge to [bus 0a-0d]
[ 0.474590] pci 0000:09:03.0: bridge window [io 0x7000-0x70ff]
[ 0.474598] pci 0000:09:03.0: bridge window [io 0x7400-0x74ff]
[ 0.474607] pci 0000:09:03.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.474616] pci 0000:09:03.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.474625] pci 0000:00:1e.0: PCI bridge to [bus 09-0a]
[ 0.474631] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff]
[ 0.474641] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc1fffff]
[ 0.474649] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.474728] pci 0000:00:1e.0: setting latency timer to 64
[ 0.474747] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.474752] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.474757] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.474762] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[ 0.474767] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.474772] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.474776] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.474781] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.474786] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.474790] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.474795] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.474800] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.474804] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.474809] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.474814] pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
[ 0.474818] pci_bus 0000:08: resource 1 [mem 0xfc000000-0xfc0fffff]
[ 0.474823] pci_bus 0000:08: resource 2 [mem 0x84000000-0x841fffff 64bit pref]
[ 0.474828] pci_bus 0000:09: resource 0 [io 0x7000-0x7fff]
[ 0.474832] pci_bus 0000:09: resource 1 [mem 0xfc100000-0xfc1fffff]
[ 0.474837] pci_bus 0000:09: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.474841] pci_bus 0000:09: resource 4 [io 0x0000-0xffff]
[ 0.474846] pci_bus 0000:09: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.474851] pci_bus 0000:0a: resource 0 [io 0x7000-0x70ff]
[ 0.474855] pci_bus 0000:0a: resource 1 [io 0x7400-0x74ff]
[ 0.474860] pci_bus 0000:0a: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.474864] pci_bus 0000:0a: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.474921] NET: Registered protocol family 2
[ 0.475023] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.475273] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.475897] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.476186] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.476189] TCP: reno registered
[ 0.476194] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.476206] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.476298] NET: Registered protocol family 1
[ 0.476684] pci 0000:01:00.0: Boot video device
[ 0.476743] PCI: CLS 64 bytes, default 64
[ 0.476821] Trying to unpack rootfs image as initramfs...
[ 1.025123] Freeing initrd memory: 13624k freed
[ 1.033059] Simple Boot Flag at 0x36 set to 0x1
[ 1.033789] audit: initializing netlink socket (disabled)
[ 1.033811] type=2000 audit(1347638221.028:1): initialized
[ 1.078009] highmem bounce pool size: 64 pages
[ 1.078030] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.081376] VFS: Disk quotas dquot_6.5.2
[ 1.081465] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.082502] fuse init (API version 7.19)
[ 1.082671] msgmni has been set to 1720
[ 1.083337] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.083383] io scheduler noop registered
[ 1.083388] io scheduler deadline registered (default)
[ 1.083401] io scheduler cfq registered
[ 1.083672] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.083831] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 1.084031] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 1.084221] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 1.084404] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 1.084568] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.084607] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.084757] intel_idle: does not run on family 6 model 15
[ 1.086273] ACPI: AC Adapter [ADP1] (off-line)
[ 1.086483] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.087585] ACPI: Lid Switch [LID0]
[ 1.087666] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.087674] ACPI: Power Button [PWRB]
[ 1.088317] ACPI: Requesting acpi_cpufreq
[ 1.094302] Monitor-Mwait will be used to enter C-1 state
[ 1.094352] Monitor-Mwait will be used to enter C-2 state
[ 1.094398] Monitor-Mwait will be used to enter C-3 state
[ 1.094409] Marking TSC unstable due to TSC halts in idle
[ 1.094431] ACPI: acpi_idle registered with cpuidle
[ 1.116938] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.116943] ACPI: Thermal Zone [TZ00] (55 C)
[ 1.117112] ACPI: Invalid active0 threshold
[ 1.118576] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.118581] ACPI: Thermal Zone [TZ01] (55 C)
[ 1.118635] GHES: HEST is not enabled!
[ 1.118659] isapnp: Scanning for PnP cards...
[ 1.150786] ACPI: Battery Slot [BAT0] (battery present)
[ 1.474142] isapnp: No Plug & Play device found
[ 1.474287] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.476975] Linux agpgart interface v0.103
[ 1.480193] brd: module loaded
[ 1.481640] loop: module loaded
[ 1.481841] ahci 0000:00:1f.2: version 3.0
[ 1.481933] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.482021] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[ 1.482029] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 1.482037] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.482653] scsi0 : ahci
[ 1.482802] scsi1 : ahci
[ 1.482934] scsi2 : ahci
[ 1.483084] ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 45
[ 1.483088] ata2: DUMMY
[ 1.483091] ata3: DUMMY
[ 1.483174] ata_piix 0000:00:1f.1: version 2.13
[ 1.483237] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.483771] scsi3 : ata_piix
[ 1.483895] scsi4 : ata_piix
[ 1.484717] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 1.484722] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 1.485348] Fixed MDIO Bus: probed
[ 1.485443] tun: Universal TUN/TAP device driver, 1.6
[ 1.485446] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.485634] PPP generic driver version 2.4.2
[ 1.485719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.485773] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.485780] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.485791] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.485833] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.489741] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.489768] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
[ 1.500030] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.500069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.500074] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.500079] usb usb1: Product: EHCI Host Controller
[ 1.500084] usb usb1: Manufacturer: Linux 3.5.3-030503-generic ehci_hcd
[ 1.500088] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.500331] hub 1-0:1.0: USB hub found
[ 1.500340] hub 1-0:1.0: 4 ports detected
[ 1.500503] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.500509] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.500519] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.500556] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.504449] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.504477] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
[ 1.516029] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.516078] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.516083] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.516088] usb usb2: Product: EHCI Host Controller
[ 1.516092] usb usb2: Manufacturer: Linux 3.5.3-030503-generic ehci_hcd
[ 1.516096] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.516301] hub 2-0:1.0: USB hub found
[ 1.516309] hub 2-0:1.0: 6 ports detected
[ 1.516451] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.516487] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.516524] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.516530] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.516539] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.516592] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 1.516646] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.516651] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.516655] usb usb3: Product: UHCI Host Controller
[ 1.516660] usb usb3: Manufacturer: Linux 3.5.3-030503-generic uhci_hcd
[ 1.516664] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.516843] hub 3-0:1.0: USB hub found
[ 1.516851] hub 3-0:1.0: 2 ports detected
[ 1.516984] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.516991] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.517000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.517050] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 1.517103] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.517108] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.517112] usb usb4: Product: UHCI Host Controller
[ 1.517117] usb usb4: Manufacturer: Linux 3.5.3-030503-generic uhci_hcd
[ 1.517121] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.517292] hub 4-0:1.0: USB hub found
[ 1.517299] hub 4-0:1.0: 2 ports detected
[ 1.517435] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.517441] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.517450] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.517485] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 1.517536] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.517541] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.517546] usb usb5: Product: UHCI Host Controller
[ 1.517550] usb usb5: Manufacturer: Linux 3.5.3-030503-generic uhci_hcd
[ 1.517554] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.517727] hub 5-0:1.0: USB hub found
[ 1.517735] hub 5-0:1.0: 2 ports detected
[ 1.517866] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.517872] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.517881] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.517932] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 1.517984] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.517989] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.517993] usb usb6: Product: UHCI Host Controller
[ 1.517997] usb usb6: Manufacturer: Linux 3.5.3-030503-generic uhci_hcd
[ 1.518001] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.518175] hub 6-0:1.0: USB hub found
[ 1.518182] hub 6-0:1.0: 2 ports detected
[ 1.518319] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.518325] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.518334] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.518369] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 1.518421] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.518426] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.518431] usb usb7: Product: UHCI Host Controller
[ 1.518435] usb usb7: Manufacturer: Linux 3.5.3-030503-generic uhci_hcd
[ 1.518440] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.518611] hub 7-0:1.0: USB hub found
[ 1.518619] hub 7-0:1.0: 2 ports detected
[ 1.518849] usbcore: registered new interface driver libusual
[ 1.518936] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.522672] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.522683] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.522897] mousedev: PS/2 mouse device common for all mice
[ 1.523203] rtc_cmos 00:07: RTC can wake from S4
[ 1.523401] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.523440] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.523531] device-mapper: uevent: version 1.0.3
[ 1.523658] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.523716] EISA: Probing bus 0 at eisa.0
[ 1.523725] Cannot allocate resource for EISA slot 1
[ 1.523729] Cannot allocate resource for EISA slot 2
[ 1.523732] Cannot allocate resource for EISA slot 3
[ 1.523735] Cannot allocate resource for EISA slot 4
[ 1.523739] Cannot allocate resource for EISA slot 5
[ 1.523742] Cannot allocate resource for EISA slot 6
[ 1.523745] Cannot allocate resource for EISA slot 7
[ 1.523765] EISA: Detected 0 cards.
[ 1.523854] cpuidle: using governor ladder
[ 1.523969] cpuidle: using governor menu
[ 1.523972] EFI Variables Facility v0.08 2004-May-17
[ 1.524375] ashmem: initialized
[ 1.524635] TCP: cubic registered
[ 1.524847] NET: Registered protocol family 10
[ 1.525186] NET: Registered protocol family 17
[ 1.525205] Key type dns_resolver registered
[ 1.525386] Using IPI No-Shortcut mode
[ 1.525684] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.525759] PM: Hibernation image not present or could not be loaded.
[ 1.525780] registered taskstats version 1
[ 1.531375] Key type trusted registered
[ 1.535177] Key type encrypted registered
[ 1.539886] Magic number: 12:104:993
[ 1.540043] rtc_cmos 00:07: setting system clock to 2012-09-14 15:57:02 UTC (1347638222)
[ 1.540914] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.540917] EDD information not available.
[ 1.656478] ata4.00: ATAPI: MATSHITABD-CMB UJ-120, 1.04, max UDMA/33
[ 1.672378] ata4.00: configured for UDMA/33
[ 1.800098] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.800867] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 1.800874] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.801375] ata1.00: ATA-8: FUJITSU MHY2200BH, 0000000B, max UDMA/100
[ 1.801380] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.802277] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 1.802284] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.802853] ata1.00: configured for UDMA/100
[ 1.803088] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0000 PQ: 0 ANSI: 5
[ 1.803331] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.803357] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.803439] sd 0:0:0:0: [sda] Write Protect is off
[ 1.803445] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.803499] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.812091] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[ 1.857822] sda: sda1 sda2 < sda5 >
[ 1.858566] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.860696] scsi 3:0:0:0: CD-ROM MATSHITA BD-CMB UJ-120 1.04 PQ: 0 ANSI: 5
[ 1.863800] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.863805] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.864018] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.864186] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.864483] Freeing unused kernel memory: 756k freed
[ 1.864980] Write protecting the kernel text: 6036k
[ 1.865034] Write protecting the kernel read-only data: 2476k
[ 1.865036] NX-protecting the kernel data: 4204k
[ 1.896493] udevd[106]: starting version 175
[ 1.947977] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b
[ 1.947986] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.034616] sky2: driver version 1.30
[ 2.034720] sky2 0000:08:00.0: Yukon-2 FE chip revision 1
[ 2.034856] sky2 0000:08:00.0: irq 46 for MSI/MSI-X
[ 2.035659] sky2 0000:08:00.0: eth0: addr 00:1a:80:1e:30:49
[ 2.112139] firewire_ohci 0000:09:03.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.314347] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.612070] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[ 2.612239] firewire_core 0000:09:03.1: created device fw0: GUID 08004603027af374, S400
[ 2.794554] usb 5-2: New USB device found, idVendor=045e, idProduct=0039
[ 2.794561] usb 5-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.794566] usb 5-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.794571] usb 5-2: Manufacturer: Microsoft
[ 3.036061] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[ 3.208449] usb 7-1: New USB device found, idVendor=044e, idProduct=3011
[ 3.208456] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.208461] usb 7-1: Product: BCM2045B2
[ 3.208465] usb 7-1: Manufacturer: Broadcom
[ 3.210495] hub 7-1:1.0: USB hub found
[ 3.212445] hub 7-1:1.0: 3 ports detected
[ 3.493454] usb 7-1.1: new full-speed USB device number 3 using uhci_hcd
[ 3.624449] usb 7-1.1: New USB device found, idVendor=044e, idProduct=3010
[ 3.624455] usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.624461] usb 7-1.1: Product: BCM2046 Bluetooth Device
[ 3.624465] usb 7-1.1: Manufacturer: Broadcom Corp
[ 3.624469] usb 7-1.1: SerialNumber: 001BFB58B29E
[ 3.701448] usb 7-1.2: new full-speed USB device number 4 using uhci_hcd
[ 3.820454] usb 7-1.2: New USB device found, idVendor=044e, idProduct=3013
[ 3.820460] usb 7-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.897450] usb 7-1.3: new full-speed USB device number 5 using uhci_hcd
[ 4.016457] usb 7-1.3: New USB device found, idVendor=044e, idProduct=3012
[ 4.016464] usb 7-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 20.562668] udevd[331]: starting version 175
[ 20.578172] Adding 2094076k swap on /dev/sda5. Priority:-1 extents:1 across:2094076k
[ 21.141911] lp: driver loaded but no devices found
[ 21.267917] wmi: Mapper loaded
[ 21.480377] [drm] Initialized drm 1.1.0 20060810
[ 21.633491] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086600a2)
[ 21.638923] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 21.711436] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 21.711442] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[ 21.711447] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 21.711452] [drm] nouveau 0000:01:00.0: Bios version 60.86.3b.00
[ 21.711457] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 21.711724] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 21.711729] [drm] nouveau 0000:01:00.0: DCB version 4.0
[ 21.711734] [drm] nouveau 0000:01:00.0: DCB outp 00: 010003f3 00000035
[ 21.711738] [drm] nouveau 0000:01:00.0: DCB outp 01: 02011300 00000028
[ 21.711742] [drm] nouveau 0000:01:00.0: DCB outp 02: 02412312 00020010
[ 21.711745] [drm] nouveau 0000:01:00.0: DCB outp 03: 010133f1 00c0c080
[ 21.711749] [drm] nouveau 0000:01:00.0: DCB conn 00: 0040
[ 21.711754] [drm] nouveau 0000:01:00.0: DCB conn 01: 0100
[ 21.711758] [drm] nouveau 0000:01:00.0: DCB conn 02: 1261
[ 21.711762] [drm] nouveau 0000:01:00.0: DCB conn 03: 0310
[ 21.711766] [drm] nouveau 0000:01:00.0: DCB conn 04: 0311
[ 21.711769] [drm] nouveau 0000:01:00.0: DCB conn 05: 0313
[ 21.711780] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBF9B
[ 21.734932] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC2CE
[ 21.751683] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCD23
[ 21.751703] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xCE15
[ 21.752802] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD002
[ 21.752806] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD067
[ 21.772662] [drm] nouveau 0000:01:00.0: 0xD067: Condition still not met after 20ms, skipping following opcodes
[ 21.772685] [drm] nouveau 0000:01:00.0: BIOS FP mode: 1280x800 (68880kHz pixel clock)
[ 21.779033] [TTM] Zone kernel: Available graphics memory: 440754 kiB
[ 21.779037] [TTM] Zone highmem: Available graphics memory: 1032022 kiB
[ 21.779040] [TTM] Initializing pool allocator
[ 21.779049] [TTM] Initializing DMA pool allocator
[ 21.779074] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (GDDR3)
[ 21.780692] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 21.803279] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 21.803284] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 21.804567] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 21.804570] [drm] No driver support for vblank timestamp query.
[ 21.810646] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 21.810654] [drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz voltage 1150mV fanspeed 100%
[ 21.810661] [drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 301MHz voltage 1150mV fanspeed 100%
[ 21.810667] [drm] nouveau 0000:01:00.0: 2: core 450MHz shader 900MHz memory 602MHz voltage 1320mV fanspeed 100%
[ 21.810672] [drm] nouveau 0000:01:00.0: c: core 275MHz shader 550MHz memory 302MHz
[ 21.833942] [drm] nouveau 0000:01:00.0: MM: using CRYPT for buffer copies
[ 22.149724] sony_laptop: Sony Notebook Control Driver v0.6
[ 22.150079] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:28/SNY5001:00/input/input3
[ 22.150343] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:28/SNY5001:00/input/input4
[ 22.194092] ACPI Warning: 0x00001060-0x0000107f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 22.194106] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.194111] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 22.194117] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 22.194125] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.194132] ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 22.194140] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.194143] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 22.212070] cfg80211: Calling CRDA to update world regulatory domain
[ 22.848257] yenta_cardbus 0000:09:03.0: CardBus bridge found [104d:9005]
[ 22.848290] yenta_cardbus 0000:09:03.0: Using CSCINT to route CSC interrupts to PCI
[ 22.848295] yenta_cardbus 0000:09:03.0: Routing CardBus interrupts to PCI
[ 22.848305] yenta_cardbus 0000:09:03.0: TI: mfunc 0x01121b22, devctl 0x64
[ 23.009877] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
[ 23.080891] yenta_cardbus 0000:09:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 23.080900] yenta_cardbus 0000:09:03.0: Socket status: 30000006
[ 23.080907] pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d
[ 23.080979] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [io 0x7000-0x7fff]
[ 23.080986] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff:
[ 23.082674] excluding 0x7000-0x70ff 0x7400-0x74ff
[ 23.096210] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [mem 0xfc100000-0xfc1fffff]
[ 23.096219] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfc100000-0xfc1fffff:
[ 23.096225] excluding 0xfc100000-0xfc10ffff
[ 23.096251] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[ 23.096256] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff:
[ 23.096278] excluding 0x80000000-0x83ffffff
[ 23.206579] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x2c0000, bo f2451400
[ 23.206743] fbcon: nouveaufb (fb0) is primary device
[ 23.239887] Console: switching to colour frame buffer device 160x50
[ 23.241291] fb0: nouveaufb frame buffer device
[ 23.241295] drm: registered panic notifier
[ 23.241304] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 23.279092] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 23.279098] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 23.279273] iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 23.322405] iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 23.322429] iwl4965 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 23.322648] iwl4965 0000:06:00.0: irq 47 for MSI/MSI-X
[ 23.465157] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 23.466433] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 23.467376] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 23.467854] excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 23.468481] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 23.469220] clean.
[ 23.469251] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 23.470064] clean.
[ 23.470098] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 23.470107] excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 23.470154] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 23.470182] clean.
[ 23.470211] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 23.470230] excluding 0x60000000-0x60ffffff
[ 23.470263] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 23.471102] clean.
[ 23.516068] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
[ 23.519804] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 23.575971] kvm: disabled by bios
[ 23.588588] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5
[ 23.605180] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[ 23.617519] Bluetooth: Core ver 2.16
[ 23.617563] NET: Registered protocol family 31
[ 23.617566] Bluetooth: HCI device and connection manager initialized
[ 23.618366] Bluetooth: HCI socket layer initialized
[ 23.618371] Bluetooth: L2CAP socket layer initialized
[ 23.618381] Bluetooth: SCO socket layer initialized
[ 23.680794] iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24
[ 23.681067] Registered led device: phy0-led
[ 23.681118] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 23.748551] usbcore: registered new interface driver usbhid
[ 23.748556] usbhid: USB HID core driver
[ 23.852503] usbcore: registered new interface driver btusb
[ 23.884771] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 23.966181] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input7
[ 23.966698] hid-generic 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2/input0
[ 23.967695] input: HID 044e:3013 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.2/7-1.2:1.0/input/input8
[ 23.969846] hid-generic 0003:044E:3013.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 044e:3013] on usb-0000:00:1d.2-1.2/input0
[ 23.975401] input: HID 044e:3012 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.3/7-1.3:1.0/input/input9
[ 23.975945] hid-generic 0003:044E:3012.0003: input,hidraw2: USB HID v1.11 Mouse [HID 044e:3012] on usb-0000:00:1d.2-1.3/input0
[ 23.979255] Linux video capture interface: v2.00
[ 23.979425] usb 7-1.2: input irq status -75 received
[ 23.995444] usb 7-1.2: input irq status -75 received
[ 24.011439] usb 7-1.2: input irq status -75 received
[ 24.017663] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 24.017668] cfg80211: World regulatory domain updated:
[ 24.017671] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 24.017675] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.017680] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 24.017684] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 24.017687] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.017691] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.027442] usb 7-1.2: input irq status -75 received
[ 24.043429] usb 7-1.2: input irq status -75 received
[ 24.059438] usb 7-1.2: input irq status -75 received
[ 24.075436] usb 7-1.2: input irq status -75 received
[ 24.091435] usb 7-1.2: input irq status -75 received
[ 24.107437] usb 7-1.2: input irq status -75 received
[ 24.123444] usb 7-1.2: input irq status -75 received
[ 24.160380] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[ 24.161806] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input10
[ 24.162104] usbcore: registered new interface driver uvcvideo
[ 24.162108] USB Video Class driver (1.1.1)
[ 24.177879] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 24.189242] usbcore: deregistering interface driver uvcvideo
[ 24.227341] Linux video capture interface: v2.00
[ 24.231688] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[ 24.232640] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input11
[ 24.233722] usbcore: registered new interface driver uvcvideo
[ 24.233726] USB Video Class driver (1.1.1)
[ 24.289583] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 24.290036] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 24.376127] type=1400 audit(1347638245.333:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=641 comm="apparmor_parser"
[ 24.376144] type=1400 audit(1347638245.333:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=788 comm="apparmor_parser"
[ 24.376926] type=1400 audit(1347638245.333:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=641 comm="apparmor_parser"
[ 24.377007] type=1400 audit(1347638245.333:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=788 comm="apparmor_parser"
[ 24.377375] type=1400 audit(1347638245.333:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=641 comm="apparmor_parser"
[ 24.377476] type=1400 audit(1347638245.333:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=788 comm="apparmor_parser"
[ 24.378338] type=1400 audit(1347638245.333:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=668 comm="apparmor_parser"
[ 24.379173] type=1400 audit(1347638245.333:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=668 comm="apparmor_parser"
[ 24.379661] type=1400 audit(1347638245.333:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=668 comm="apparmor_parser"
[ 24.684540] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 25.375834] init: failsafe main process (921) killed by TERM signal
[ 26.011661] type=1400 audit(1347638246.965:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=978 comm="apparmor_parser"
[ 27.059941] ppdev: user-space parallel port driver
[ 27.532805] Bluetooth: RFCOMM TTY layer initialized
[ 27.532814] Bluetooth: RFCOMM socket layer initialized
[ 27.532818] Bluetooth: RFCOMM ver 1.11
[ 27.773612] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.773618] Bluetooth: BNEP filters: protocol multicast
[ 28.244651] kvm: disabled by bios
[ 28.323417] init: qemu-kvm pre-start process (1060) terminated with status 1
[ 28.547651] init: libvirt-bin main process (1109) terminated with status 127
[ 28.547704] init: libvirt-bin main process ended, respawning
[ 29.297730] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 29.313922] sky2 0000:08:00.0: eth0: enabling interface
[ 29.314328] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.562094] init: plymouth-stop pre-start process (1826) terminated with status 1
[ 36.096642] wlan0: authenticate with 02:1e:58:07:fe:06
[ 36.105920] wlan0: send auth to 02:1e:58:07:fe:06 (try 1/3)
[ 36.108546] wlan0: authenticated
[ 36.120079] wlan0: associate with 02:1e:58:07:fe:06 (try 1/3)
[ 36.122402] wlan0: RX AssocResp from 02:1e:58:07:fe:06 (capab=0x411 status=0 aid=1)
[ 36.150076] wlan0: associated
[ 36.150382] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready


Ποια καθυστερηση; Σιγα φιλε μου δεν πειραζει!
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 14.10 utopic 3.13.0-37-generic 64bit (en_US.UTF-8, Unity ubuntu), Ubuntu 3.13.0-32-generic, Windows 7
3 AMD Athlon 64 X2 Dual Core Processor 5200+ ‖ RAM 3953 MiB ‖ ASUS INC. M2N
4 nVidia GT200 [GeForce GTX 260] [10de:05e2] {nvidia}
5 eth0: nVidia MCP61 Ethernet [10de:03ef] (rev a2)
pelopidass
babeTUX
babeTUX
 
Δημοσιεύσεις: 98
Εγγραφή: 05 Σεπ 2012, 15:18
Εκτύπωση

Re: nVidia 8400M GT + HDMI problem + Brightness Problem(hotk

Δημοσίευσηαπό Learner » 14 Σεπ 2012, 19:33

pelopidass έγραψε:
Κώδικας: Επιλογή όλων
[ 21.779074] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (GDDR3)
[ 21.780692] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 21.803279] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 21.803284] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 21.804567] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 21.804570] [drm] No driver support for vblank timestamp query.
[ 21.810646] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 21.810654] [drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz voltage 1150mV fanspeed 100%
[ 21.810661] [drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 301MHz voltage 1150mV fanspeed 100%
[ 21.810667] [drm] nouveau 0000:01:00.0: 2: core 450MHz shader 900MHz memory 602MHz voltage 1320mV fanspeed 100%
[ 21.810672] [drm] nouveau 0000:01:00.0: c: core 275MHz shader 550MHz memory 302MHz
[ 21.833942] [drm] nouveau 0000:01:00.0: MM: using CRYPT for buffer copies
[ 23.241304] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0


Εδώ φαίνονται καλύτερα τα μηνύματα. Βλέπεις κάποια διαφορά ;
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9766
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: nVidia 8400M GT + HDMI problem + Brightness Problem(hotk

Δημοσίευσηαπό pelopidass » 14 Σεπ 2012, 19:34

Την πρωτη πρωτη φορα με τον καινουργιο πυρηνα μπηκε σε μικρη αναλυση. Εκανα ενα restart και ολα κανονικα μετα. Θα το παρακολουθησω και θα σε ενημερωσω.
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 14.10 utopic 3.13.0-37-generic 64bit (en_US.UTF-8, Unity ubuntu), Ubuntu 3.13.0-32-generic, Windows 7
3 AMD Athlon 64 X2 Dual Core Processor 5200+ ‖ RAM 3953 MiB ‖ ASUS INC. M2N
4 nVidia GT200 [GeForce GTX 260] [10de:05e2] {nvidia}
5 eth0: nVidia MCP61 Ethernet [10de:03ef] (rev a2)
pelopidass
babeTUX
babeTUX
 
Δημοσιεύσεις: 98
Εγγραφή: 05 Σεπ 2012, 15:18
Εκτύπωση

Re: nVidia 8400M GT + HDMI problem + Brightness Problem(hotk

Δημοσίευσηαπό Learner » 14 Σεπ 2012, 19:39

pelopidass έγραψε:Εκανα ενα restart και ολα κανονικα μετα. Θα το παρακολουθησω και θα σε ενημερωσω.


OK. Παρακολούθησε το και εάν μπει σε μικρή ανάλυση κάποια στιγμή , τότε δώσε το αποτέλεσμα

Κώδικας: Επιλογή όλων
dmesg | grep -ie drm -ie nouveau -ie vesa -ie nvrm -ie acpi
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9766
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: nVidia 8400M GT + HDMI problem + Brightness Problem(hotk

Δημοσίευσηαπό pelopidass » 14 Σεπ 2012, 21:35

Κώδικας: Επιλογή όλων
[ 0.000000] BIOS-e820: [mem 0x000000007fed0000-0x000000007fedffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS
[ 0.000000] ACPI: RSDP 000f8060 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 7fed7f39 00084 (v01 Sony VAIO 20070704 PTL 00000000)
[ 0.000000] ACPI: FACP 7fedfc04 000F4 (v03 Sony VAIO 20070704 PTL 00000001)
[ 0.000000] ACPI: DSDT 7fed9217 06979 (v02 Sony VAIO 20070704 PTL 20050624)
[ 0.000000] ACPI: FACS 7fee2fc0 00040
[ 0.000000] ACPI: APIC 7fedfcf8 00068 (v01 Sony VAIO 20070704 PTL 0000005A)
[ 0.000000] ACPI: HPET 7fedfd60 00038 (v01 Sony VAIO 20070704 PTL 0000005A)
[ 0.000000] ACPI: MCFG 7fedfd98 0003C (v01 Sony VAIO 20070704 PTL 0000005A)
[ 0.000000] ACPI: SLIC 7fedfdd4 00176 (v01 Sony VAIO 20070704 PTL 01000000)
[ 0.000000] ACPI: TMOR 7fedff4a 00026 (v01 Sony VAIO 20070704 PTL 00000003)
[ 0.000000] ACPI: APIC 7fedff70 00068 (v01 Sony VAIO 20070704 PTL 00000000)
[ 0.000000] ACPI: BOOT 7fedffd8 00028 (v01 Sony VAIO 20070704 PTL 00000001)
[ 0.000000] ACPI: SSDT 7fed90fa 0011D (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.000000] ACPI: SSDT 7fed85a5 00287 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.000000] ACPI: SSDT 7fed84f1 000B4 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.000000] ACPI: SSDT 7fed7fbd 00534 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.3-030503-generic root=UUID=d4000f4c-a9db-4cd9-b0fc-d39e29a75a2e ro acpi_osi=Linux splash quiet video=vesa:off vt.handoff=7
[ 0.008688] ACPI: Core revision 20120320
[ 0.077425] PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff] (12288 bytes)
[ 0.077635] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.077637] ACPI: bus type pci registered
[ 0.080826] ACPI: Added _OSI(Module Device)
[ 0.080826] ACPI: Added _OSI(Processor Device)
[ 0.080826] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.080826] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.080826] ACPI: Added _OSI(Linux)
[ 0.081845] ACPI: EC: Look up EC in DSDT
[ 0.085843] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.087068] ACPI: SSDT 7fed8d75 002A1 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.087506] ACPI: Dynamic OEM Table Load:
[ 0.087510] ACPI: SSDT (null) 002A1 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.087655] ACPI: SSDT 7fed882c 004B7 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.088077] ACPI: Dynamic OEM Table Load:
[ 0.088081] ACPI: SSDT (null) 004B7 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.088432] ACPI: SSDT 7fed9016 000E4 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.088866] ACPI: Dynamic OEM Table Load:
[ 0.088870] ACPI: SSDT (null) 000E4 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.088988] ACPI: SSDT 7fed8ce3 00092 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.089407] ACPI: Dynamic OEM Table Load:
[ 0.089410] ACPI: SSDT (null) 00092 (v01 Sony VAIO 20070704 PTL 20050624)
[ 0.292096] ACPI: Interpreter enabled
[ 0.292109] ACPI: (supports S0 S3 S4 S5)
[ 0.292131] ACPI: Using IOAPIC for interrupt routing
[ 0.308621] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.316792] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.316981] ACPI: No dock devices found.
[ 0.316989] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.317517] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.320498] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.368767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.368973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.369137] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.369243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.369349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.369455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.369739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.370032] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.370163] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x00
[ 0.370165] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.383732] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.383794] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.383854] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.383913] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.383975] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.384044] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.384102] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.384159] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.384306] ACPI: bus type usb registered
[ 0.384306] PCI: Using ACPI for IRQ routing
[ 0.410100] pnp: PnP ACPI init
[ 0.410120] ACPI: bus type pnp registered
[ 0.418458] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.418674] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.418973] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.419036] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.419198] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.419275] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.419445] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.419514] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.419596] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.419664] pnp 00:09: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[ 0.419687] pnp: PnP ACPI: found 10 devices
[ 0.419689] ACPI: ACPI bus type pnp unregistered
[ 0.419693] PnPBIOS: Disabled by ACPI PNP
[ 0.831467] ACPI: AC Adapter [ADP1] (on-line)
[ 0.832166] ACPI: Lid Switch [LID0]
[ 0.832254] ACPI: Power Button [PWRB]
[ 0.832992] ACPI: Requesting acpi_cpufreq
[ 0.836259] ACPI: acpi_idle registered with cpuidle
[ 0.855456] ACPI: Thermal Zone [TZ00] (58 C)
[ 0.855591] ACPI: Invalid active0 threshold
[ 0.857118] ACPI: Thermal Zone [TZ01] (58 C)
[ 0.890488] ACPI: Battery Slot [BAT0] (battery present)
[ 1.536777] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 1.536781] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.538083] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 1.538088] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 21.033747] [drm] Initialized drm 1.1.0 20060810
[ 21.256066] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[ 21.256511] [drm] nouveau 0000:01:00.0: unsupported chipset 0xffffffff
[ 21.256712] nouveau: probe of 0000:01:00.0 failed with error -22
[ 21.614800] ACPI Warning: 0x00001060-0x0000107f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 21.614810] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.614817] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 21.614821] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.614826] ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 21.614830] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 24.929989] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0426) installed
[ 24.929989] NVRM: in this system is not supported by the 304.43 NVIDIA Linux
[ 24.929989] NVRM: graphics driver release. Please see 'Appendix A -
[ 24.929989] NVRM: Supported NVIDIA GPU Products' in this release's README,
[ 24.929989] NVRM: available on the Linux graphics driver download page at
[ 24.929989] NVRM: www.nvidia.com.
[ 24.930417] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 24.930419] NVRM: None of the NVIDIA graphics adapters were initialized!


Δεν νομιζω να σου έλειψα! χε χε!
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 14.10 utopic 3.13.0-37-generic 64bit (en_US.UTF-8, Unity ubuntu), Ubuntu 3.13.0-32-generic, Windows 7
3 AMD Athlon 64 X2 Dual Core Processor 5200+ ‖ RAM 3953 MiB ‖ ASUS INC. M2N
4 nVidia GT200 [GeForce GTX 260] [10de:05e2] {nvidia}
5 eth0: nVidia MCP61 Ethernet [10de:03ef] (rev a2)
pelopidass
babeTUX
babeTUX
 
Δημοσιεύσεις: 98
Εγγραφή: 05 Σεπ 2012, 15:18
Εκτύπωση

Re: nVidia 8400M GT + HDMI problem + Brightness Problem(hotk

Δημοσίευσηαπό Learner » 14 Σεπ 2012, 21:42

Έχεις κάτι από Nvidia drivers μέσα ;

Δώσε τα αποτελέσματα
Κώδικας: Επιλογή όλων
dpkg -l | grep -i nvidia


και επίσης
Κώδικας: Επιλογή όλων
sudo -i
cd /
find -name nvidia
exit

Εκτέλεσε τις παραπάνω εντολές με τη σειρά και ότι αποτελέσματα σου βγάλει η εντολή
Κώδικας: Επιλογή όλων
find -name nvidia
παρέθεσε τα εδώ.
Τέλος , δώσε και το
Κώδικας: Επιλογή όλων
cat /etc/default/grub
ολόκληρο.
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9766
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: nVidia 8400M GT + HDMI problem + Brightness Problem(hotk

Δημοσίευσηαπό pelopidass » 14 Σεπ 2012, 21:48

Κώδικας: Επιλογή όλων
ii nvidia-common 1:0.2.44 Find obsolete NVIDIA drivers


Κώδικας: Επιλογή όλων
./etc/apparmor.d/abstractions/nvidia
./usr/src/linux-headers-3.2.0-30/drivers/video/nvidia
./usr/src/linux-headers-3.2.0-30/drivers/net/ethernet/nvidia
./usr/src/linux-headers-3.2.0-29/drivers/video/nvidia
./usr/src/linux-headers-3.2.0-29/drivers/net/ethernet/nvidia
./usr/src/linux-headers-3.5.3-030503/drivers/video/nvidia
./usr/src/linux-headers-3.5.3-030503/drivers/net/ethernet/nvidia
./usr/src/linux-headers-3.2.0-29-generic-pae/include/config/fb/nvidia
./usr/src/linux-headers-3.5.3-030503-generic/include/config/fb/nvidia
./usr/src/linux-headers-3.2.0-30-generic-pae/include/config/fb/nvidia
./usr/lib/nvidia
./lib/modules/3.5.3-030503-generic/kernel/drivers/video/nvidia
./lib/modules/3.5.3-030503-generic/kernel/drivers/net/ethernet/nvidia
./lib/modules/3.2.0-29-generic-pae/kernel/drivers/video/nvidia
./lib/modules/3.2.0-29-generic-pae/kernel/drivers/net/ethernet/nvidia
./lib/modules/3.2.0-30-generic-pae/kernel/drivers/video/nvidia
./lib/modules/3.2.0-30-generic-pae/kernel/drivers/net/ethernet/nvidia
./var/lib/dkms/nvidia
./var/lib/nvidia


Κώδικας: Επιλογή όλων
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'

GRUB_DEFAULT="0"
#GRUB_HIDDEN_TIMEOUT="5"
GRUB_HIDDEN_TIMEOUT_QUIET="true"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="splash quiet video=vesa:off"
GRUB_CMDLINE_LINUX="acpi_osi=Linux"

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

export GRUB_COLOR_NORMAL="light-gray/black"
export GRUB_COLOR_HIGHLIGHT="blue/black"
GRUB_SAVEDEFAULT="false"


Από ότι φαίνεται έχω ΠΟΛΛΑ από nVidia.
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 14.10 utopic 3.13.0-37-generic 64bit (en_US.UTF-8, Unity ubuntu), Ubuntu 3.13.0-32-generic, Windows 7
3 AMD Athlon 64 X2 Dual Core Processor 5200+ ‖ RAM 3953 MiB ‖ ASUS INC. M2N
4 nVidia GT200 [GeForce GTX 260] [10de:05e2] {nvidia}
5 eth0: nVidia MCP61 Ethernet [10de:03ef] (rev a2)
pelopidass
babeTUX
babeTUX
 
Δημοσιεύσεις: 98
Εγγραφή: 05 Σεπ 2012, 15:18
Εκτύπωση

Re: nVidia 8400M GT + HDMI problem + Brightness Problem(hotk  Το θέμα επιλύθηκε

Δημοσίευσηαπό Learner » 14 Σεπ 2012, 22:04

pelopidass έγραψε:Από ότι φαίνεται έχω ΠΟΛΛΑ από nVidia.


Οχι εντάξει είναι.
Απλά δεν μπορώ να καταλάβω αυτό το μήνυμα
pelopidass έγραψε:
Κώδικας: Επιλογή όλων
NVRM: in this system is not supported by the 304.43 NVIDIA Linux

από τη στιγμή που έχεις απεγκαταστήσει ότι έχει σχέση με Nvidia drivers.

Βρήκα ένα bug σχετικό με την κάρτα σου . Δυστυχώς αν και είναι High Importance δεν έχει λυθεί ακόμη : Launchpad bug: #661248

EDIT: Υπαρχει ένα fix στο 100στο Comment με μια παράμετρο στον grub. Για 32bit συστήματα. , απ' ότι βλέπω στην υπογραφή σου 32bit έχεις.

Οπότε δοκιμάζουμε και βλέπουμε

Αυτή είναι μια εντολή
Κώδικας: Επιλογή όλων
sudo sed -i 's/GRUB_CMDLINE_LINUX_DEFAULT="splash quiet video=vesa:off"/GRUB_CMDLINE_LINUX_DEFAULT="splash quiet pci=bios"/g' /etc/default/grub


μετά δίνεις
Κώδικας: Επιλογή όλων
sudo update-grub
και κάνεις επανεκκίνηση.
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9766
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: nVidia 8400M GT + HDMI problem + Brightness Problem(hotk

Δημοσίευσηαπό pelopidass » 14 Σεπ 2012, 22:07

Περιμενουμε! :) Ευχαριστω πολυ φιλε που ασχοληθηκες τοσο πολυ! :)
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 14.10 utopic 3.13.0-37-generic 64bit (en_US.UTF-8, Unity ubuntu), Ubuntu 3.13.0-32-generic, Windows 7
3 AMD Athlon 64 X2 Dual Core Processor 5200+ ‖ RAM 3953 MiB ‖ ASUS INC. M2N
4 nVidia GT200 [GeForce GTX 260] [10de:05e2] {nvidia}
5 eth0: nVidia MCP61 Ethernet [10de:03ef] (rev a2)
pelopidass
babeTUX
babeTUX
 
Δημοσιεύσεις: 98
Εγγραφή: 05 Σεπ 2012, 15:18
Εκτύπωση

Re: nVidia 8400M GT + HDMI problem + Brightness Problem(hotk

Δημοσίευσηαπό Learner » 14 Σεπ 2012, 22:10

pelopidass έγραψε:Περιμενουμε! :) Ευχαριστω πολυ φιλε που ασχοληθηκες τοσο πολυ! :)


Έκανα EDIT στο ποστ μου , κοίτα το !
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9766
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

ΠροηγούμενηΕπόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Κάρτες Γραφικών / Εικόνα / TV