Μέτα από αρκετό ψάξιμο πιστεύω ότι κατάφερα να δει ο υπολογιστής την κάρτα, αφού μπόρεσα και βρήκα κάποιο κώδικα σε linux και τον "πάντρεψα" με αρχεία οδηγούς των windows διαβάζοντας οδηγίες από διάφορα site το αποτέλεσμα είναι το εξής :
Με την εντολη
- Κώδικας: Επιλογή όλων
dunerec -i 0 -S 1 -d 1
ενεργοποιείτε η κάρτα και σταματάει να αναβοσβήνει το ενδεικτικό Ready που σημαίνει ότι "ενεργοποιήθηκε" το αποτέλεσμα της εντολής είναι:
- Κώδικας: Επιλογή όλων
Dune at 002/005 VID 2304 PID 061E
Loading ezusb2 firmware...
dune.sys: FWOff: 106152 FWLen: 11022
You have to restart the program!
Με την εντολή:
- Κώδικας: Επιλογή όλων
dunerec -i 0 -S 1
σαρώνει και βρίσκει αναλογικά κανάλια που είναι σε λειτουργία αυτή την στιγμή στην περιοχή μου, το αποτέλεσμα είναι:
- Κώδικας: Επιλογή όλων
draco@draco-Linux:/usr/local/bin/dunerec$ sudo /usr/local/bin/dunerec/dunerec -i 0 -S 1
EZUSB2 FW Version: 2 Microcode Version: MPEG2.02.23
# Mono
CH21 471250
# Mono
CH23 487250
# Mono
CH24 495250
# Mono
CH27 519250
# Mono
CH28 527250
# Stereo
CH30 543250
# Stereo
CH31 551250
# Mono
CH32 559250
# Mono
CH33 567250
# Mono
CH34 575250
# Mono
CH35 583250
# Mono
CH36 591250
# Stereo
CH37 599250
# Mono
CH40 623250
# Mono
CH41 631250
# Mono
CH43 647250
# Mono
CH45 663250
# Mono
CH49 695250
# Mono
CH50 703250
# Mono
CH53 727250
# Mono
CH55 743250
# Stereo
CH56 751250
# Mono
CH57 759250
# Mono
CH58 767250
# Mono
CH61 791250
# Mono
CH62 799250
# Stereo
CH64 815250
# Stereo
CH67 839250
# Mono
CH68 847250
draco@draco-Linux:/usr/local/bin/dunerec$
Δοκίμασα και άλλες εντολές και "διακόπτες" και είχα διάφορα αποτελέσματα, άλλα με επιτυχία άλλα χωρίς αποτέλεσμα (ίσως να φταίει το ότι δεν έδινα σωστά κάποιες παραμέτρους... )
Αυτό που θέλω από εσάς είναι μια βοήθεια σε αυτό που βρήκα, βρήκα λοιπόν μια εφαρμογή που είναι μάλλον σχεδιασμένη για να συνεργάζεται με το ολλο σύστημα (της κάρτας και του λογισμικού που την βλέπει)
Το πρόγραμμα είναι σε μορφή συμπιεσμένη , είναι το
pctv_gtk-1.4.tar.gz(Έχω εγκαταστήσει το build-essential )Αφού λοιπόν το αποσυμπίεσα το αρχείο ακολούθησα της οδηγίες που έγραφε το αρχείο install και readme δεν κατάφερα να δημιουργήσω το εκτελέσιμο αρχείο και η διαδικασία σύμφωνα με τις οδηγίες είναι η εξής :
- Κώδικας: Επιλογή όλων
sudo ./configure
Το αποτέλεσμα:
- Κώδικας: Επιλογή όλων
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets $(MAKE)... yes
checking for working aclocal-1.4... found
checking for working autoconf... found
checking for working automake-1.4... found
checking for working autoheader... found
checking for working makeinfo... missing
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for strerror in -lcposix... no
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking for gcc option to accept ANSI C... none needed
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... f77
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether f77 accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking for correct ltmain.sh version... grep: character class syntax is [[:space:]], not [:space:]
no
*** Gentoo sanity check failed! ***
*** libtool.m4 and ltmain.sh have a version mismatch! ***
*** (libtool.m4 = 1.5.16, ltmain.sh = ) ***
Please run:
libtoolize --copy --force
if appropriate, please contact the maintainer of this
package (or your distribution) for help.
Μετά έδωσα την εντολή που μου προτείνει:
- Κώδικας: Επιλογή όλων
libtoolize --copy --force
Το αποτέλεσμα :
- Κώδικας: Επιλογή όλων
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize: `/usr/share/aclocal/libtool.m4'
libtoolize: `/usr/share/aclocal/ltoptions.m4'
libtoolize: `/usr/share/aclocal/ltversion.m4'
libtoolize: `/usr/share/aclocal/ltsugar.m4'
libtoolize: `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Η επόμενη εντολή που προτείνει μέσα από το install αρχείο είναι :
- Κώδικας: Επιλογή όλων
sudo sh ./configure
Το αποτέλεσμα είναι:
- Κώδικας: Επιλογή όλων
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets $(MAKE)... yes
checking for working aclocal-1.4... found
checking for working autoconf... found
checking for working automake-1.4... found
checking for working autoheader... found
checking for working makeinfo... missing
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for strerror in -lcposix... no
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking for gcc option to accept ANSI C... none needed
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... f77
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether f77 accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking for correct ltmain.sh version... grep: character class syntax is [[:space:]], not [:space:]
no
*** Gentoo sanity check failed! ***
*** libtool.m4 and ltmain.sh have a version mismatch! ***
*** (libtool.m4 = 1.5.16, ltmain.sh = ) ***
Please run:
libtoolize --copy --force
if appropriate, please contact the maintainer of this
package (or your distribution) for help.
και τελος:
- Κώδικας: Επιλογή όλων
sudo CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
Με αποτελεσμα:
- Κώδικας: Επιλογή όλων
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets $(MAKE)... yes
checking for working aclocal-1.4... found
checking for working autoconf... found
checking for working automake-1.4... found
checking for working autoheader... found
checking for working makeinfo... missing
checking for gcc... c89
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.
και...
- Κώδικας: Επιλογή όλων
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
με αποτέλεσμα ..
- Κώδικας: Επιλογή όλων
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets $(MAKE)... yes
checking for working aclocal-1.4... found
checking for working autoconf... found
checking for working automake-1.4... found
checking for working autoheader... found
checking for working makeinfo... missing
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for strerror in -lcposix... no
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking for gcc option to accept ANSI C... none needed
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... f77
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether f77 accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking for correct ltmain.sh version... grep: character class syntax is [[:space:]], not [:space:]
no
*** Gentoo sanity check failed! ***
*** libtool.m4 and ltmain.sh have a version mismatch! ***
*** (libtool.m4 = 1.5.16, ltmain.sh = ) ***
Please run:
libtoolize --copy --force
if appropriate, please contact the maintainer of this
package (or your distribution) for help.
Τα αρχεία συνολικά είναι:
acconfig.h
acinclude.m4
aclocal.m4
AUTHORS
ChangeLog
config.guess
config.h.in
config.log
config.sub
configure
configure.in
COPYING
INSTALL
install-sh
list.txt
ltmain.sh
Makefile.am
Makefile.in
missing
mkinstalldirs
NEWS
README
src
stamp-h.in
TODO
Σημασία έχει ότι μετά από όλη αυτή την περιπέτεια δεν κατάφερα να φθάσω στην εντολή make που πιστεύω ότι εκεί θα τελείωνε "το ταξίδι στην Ιθάκη"Το ποθητό αποτέλεσμα θα ήταν κάπως έτσι:
Ελπίζω να μην σας κουράσω με την μακρηγορία μου, αλλά ήθελα να έχετε όσο το δυνατόν μια καλή εικόνα για το τι έχω κάνει και που έχω κολλήσει, η κάθε βοήθεια και γνώμη είναι σημαντική, ευχαριστώ για την φιλοξενία...
το αρχείο config.log λέει:
- Κώδικας: Επιλογή όλων
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.59. Invocation command line was
$ ./configure
## --------- ##
## Platform. ##
## --------- ##
hostname = draco-Linux
uname -m = i686
uname -r = 3.5.0-21-generic
uname -s = Linux
uname -v = #32-Ubuntu SMP Tue Dec 11 18:52:46 UTC 2012
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1534: checking for a BSD-compatible install
configure:1589: result: /usr/bin/install -c
configure:1600: checking whether build environment is sane
configure:1643: result: yes
configure:1658: checking whether make sets $(MAKE)
configure:1678: result: yes
configure:1710: checking for working aclocal-1.4
configure:1717: result: found
configure:1725: checking for working autoconf
configure:1732: result: found
configure:1740: checking for working automake-1.4
configure:1747: result: found
configure:1755: checking for working autoheader
configure:1762: result: found
configure:1770: checking for working makeinfo
configure:1781: result: missing
configure:1838: checking for gcc
configure:1854: found /usr/bin/gcc
configure:1864: result: gcc
configure:2108: checking for C compiler version
configure:2111: gcc --version </dev/null >&5
gcc (Ubuntu/Linaro 4.7.2-2ubuntu1) 4.7.2
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2114: $? = 0
configure:2116: gcc -v </dev/null >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/i686-linux-gnu/4.7/lto-wrapper
Target: i686-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.7.2-2ubuntu1' --with-bugurl=file:///usr/share/doc/gcc-4.7/README.Bugs --enable-languages=c,c++,go,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.7 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.7 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --enable-targets=all --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=i686-linux-gnu --host=i686-linux-gnu --target=i686-linux-gnu
Thread model: posix
gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1)
configure:2119: $? = 0
configure:2121: gcc -V </dev/null >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:2124: $? = 4
configure:2147: checking for C compiler default output file name
configure:2150: gcc -I/usr/local/include -s conftest.c >&5
configure:2153: $? = 0
configure:2199: result: a.out
configure:2204: checking whether the C compiler works
configure:2210: ./a.out
configure:2213: $? = 0
configure:2230: result: yes
configure:2237: checking whether we are cross compiling
configure:2239: result: no
configure:2242: checking for suffix of executables
configure:2244: gcc -o conftest -I/usr/local/include -s conftest.c >&5
configure:2247: $? = 0
configure:2272: result:
configure:2278: checking for suffix of object files
configure:2299: gcc -c -I/usr/local/include conftest.c >&5
configure:2302: $? = 0
configure:2324: result: o
configure:2328: checking whether we are using the GNU C compiler
configure:2352: gcc -c -I/usr/local/include conftest.c >&5
configure:2358: $? = 0
configure:2362: test -z
|| test ! -s conftest.err
configure:2365: $? = 0
configure:2368: test -s conftest.o
configure:2371: $? = 0
configure:2384: result: yes
configure:2390: checking whether gcc accepts -g
configure:2411: gcc -c -g -I/usr/local/include conftest.c >&5
configure:2417: $? = 0
configure:2421: test -z
|| test ! -s conftest.err
configure:2424: $? = 0
configure:2427: test -s conftest.o
configure:2430: $? = 0
configure:2441: result: yes
configure:2458: checking for gcc option to accept ANSI C
configure:2528: gcc -c -g -O2 -I/usr/local/include conftest.c >&5
configure:2534: $? = 0
configure:2538: test -z
|| test ! -s conftest.err
configure:2541: $? = 0
configure:2544: test -s conftest.o
configure:2547: $? = 0
configure:2565: result: none needed
configure:2583: gcc -c -g -O2 -I/usr/local/include conftest.c >&5
conftest.c:2:3: error: unknown type name 'choke'
conftest.c:2:3: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input
configure:2589: $? = 1
configure: failed program was:
| #ifndef __cplusplus
| choke me
| #endif
configure:2724: checking for strerror in -lcposix
configure:2754: gcc -o conftest -g -O2 -I/usr/local/include -s conftest.c -lcposix >&5
/usr/bin/ld: cannot find -lcposix
collect2: error: ld returned 1 exit status
configure:2760: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pctv_gtk"
| #define VERSION "1.4"
| /* end confdefs.h. */
|
| /* Override any gcc2 internal prototype to avoid an error. */
| #ifdef __cplusplus
| extern "C"
| #endif
| /* We use char because int might match the return type of a gcc2
| builtin and then its argument prototype would still apply. */
| char strerror ();
| int
| main ()
| {
| strerror ();
| ;
| return 0;
| }
configure:2786: result: no
configure:2842: checking for gcc
configure:2868: result: gcc
configure:3112: checking for C compiler version
configure:3115: gcc --version </dev/null >&5
gcc (Ubuntu/Linaro 4.7.2-2ubuntu1) 4.7.2
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3118: $? = 0
configure:3120: gcc -v </dev/null >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/i686-linux-gnu/4.7/lto-wrapper
Target: i686-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.7.2-2ubuntu1' --with-bugurl=file:///usr/share/doc/gcc-4.7/README.Bugs --enable-languages=c,c++,go,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.7 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.7 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --enable-targets=all --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=i686-linux-gnu --host=i686-linux-gnu --target=i686-linux-gnu
Thread model: posix
gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1)
configure:3123: $? = 0
configure:3125: gcc -V </dev/null >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3128: $? = 4
configure:3131: checking whether we are using the GNU C compiler
configure:3187: result: yes
configure:3193: checking whether gcc accepts -g
configure:3244: result: yes
configure:3261: checking for gcc option to accept ANSI C
configure:3368: result: none needed
configure:3386: gcc -c -I/usr/local/include conftest.c >&5
conftest.c:2:3: error: unknown type name 'choke'
conftest.c:2:3: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input
configure:3392: $? = 1
configure: failed program was:
| #ifndef __cplusplus
| choke me
| #endif
configure:3528: checking for gcc option to accept ANSI C
configure:3590: gcc -c -I/usr/local/include conftest.c >&5
configure:3596: $? = 0
configure:3600: test -z
|| test ! -s conftest.err
configure:3603: $? = 0
configure:3606: test -s conftest.o
configure:3609: $? = 0
configure:3624: result: none needed
configure:3640: checking how to run the C preprocessor
configure:3675: gcc -E -I/usr/local/include conftest.c
configure:3681: $? = 0
configure:3713: gcc -E -I/usr/local/include conftest.c
conftest.c:11:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:3719: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pctv_gtk"
| #define VERSION "1.4"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3758: result: gcc -E
configure:3782: gcc -E -I/usr/local/include conftest.c
configure:3788: $? = 0
configure:3820: gcc -E -I/usr/local/include conftest.c
conftest.c:11:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:3826: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pctv_gtk"
| #define VERSION "1.4"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3870: checking for egrep
configure:3880: result: grep -E
configure:3885: checking for ANSI C header files
configure:3910: gcc -c -I/usr/local/include conftest.c >&5
configure:3916: $? = 0
configure:3920: test -z
|| test ! -s conftest.err
configure:3923: $? = 0
configure:3926: test -s conftest.o
configure:3929: $? = 0
configure:4018: gcc -o conftest -I/usr/local/include -s conftest.c >&5
conftest.c: In function 'main':
conftest.c:28:7: warning: incompatible implicit declaration of built-in function 'exit' [enabled by default]
configure:4021: $? = 0
configure:4023: ./conftest
configure:4026: $? = 0
configure:4041: result: yes
configure:4129: checking build system type
configure:4147: result: i686-pc-linux-gnu
configure:4155: checking host system type
configure:4169: result: i686-pc-linux-gnu
configure:4177: checking for a sed that does not truncate output
configure:4231: result: /bin/sed
configure:4245: checking for ld used by gcc
configure:4312: result: /usr/bin/ld
configure:4321: checking if the linker (/usr/bin/ld) is GNU ld
configure:4336: result: yes
configure:4341: checking for /usr/bin/ld option to reload object files
configure:4348: result: -r
configure:4366: checking for BSD-compatible nm
configure:4408: result: /usr/bin/nm -B
configure:4412: checking whether ln -s works
configure:4416: result: yes
configure:4423: checking how to recognise dependent libraries
configure:4595: result: pass_all
configure:4726: gcc -c -I/usr/local/include conftest.c >&5
configure:4729: $? = 0
configure:4835: checking for sys/types.h
configure:4851: gcc -c -I/usr/local/include conftest.c >&5
configure:4857: $? = 0
configure:4861: test -z
|| test ! -s conftest.err
configure:4864: $? = 0
configure:4867: test -s conftest.o
configure:4870: $? = 0
configure:4881: result: yes
configure:4835: checking for sys/stat.h
configure:4851: gcc -c -I/usr/local/include conftest.c >&5
configure:4857: $? = 0
configure:4861: test -z
|| test ! -s conftest.err
configure:4864: $? = 0
configure:4867: test -s conftest.o
configure:4870: $? = 0
configure:4881: result: yes
configure:4835: checking for stdlib.h
configure:4851: gcc -c -I/usr/local/include conftest.c >&5
configure:4857: $? = 0
configure:4861: test -z
|| test ! -s conftest.err
configure:4864: $? = 0
configure:4867: test -s conftest.o
configure:4870: $? = 0
configure:4881: result: yes
configure:4835: checking for string.h
configure:4851: gcc -c -I/usr/local/include conftest.c >&5
configure:4857: $? = 0
configure:4861: test -z
|| test ! -s conftest.err
configure:4864: $? = 0
configure:4867: test -s conftest.o
configure:4870: $? = 0
configure:4881: result: yes
configure:4835: checking for memory.h
configure:4851: gcc -c -I/usr/local/include conftest.c >&5
configure:4857: $? = 0
configure:4861: test -z
|| test ! -s conftest.err
configure:4864: $? = 0
configure:4867: test -s conftest.o
configure:4870: $? = 0
configure:4881: result: yes
configure:4835: checking for strings.h
configure:4851: gcc -c -I/usr/local/include conftest.c >&5
configure:4857: $? = 0
configure:4861: test -z
|| test ! -s conftest.err
configure:4864: $? = 0
configure:4867: test -s conftest.o
configure:4870: $? = 0
configure:4881: result: yes
configure:4835: checking for inttypes.h
configure:4851: gcc -c -I/usr/local/include conftest.c >&5
configure:4857: $? = 0
configure:4861: test -z
|| test ! -s conftest.err
configure:4864: $? = 0
configure:4867: test -s conftest.o
configure:4870: $? = 0
configure:4881: result: yes
configure:4835: checking for stdint.h
configure:4851: gcc -c -I/usr/local/include conftest.c >&5
configure:4857: $? = 0
configure:4861: test -z
|| test ! -s conftest.err
configure:4864: $? = 0
configure:4867: test -s conftest.o
configure:4870: $? = 0
configure:4881: result: yes
configure:4835: checking for unistd.h
configure:4851: gcc -c -I/usr/local/include conftest.c >&5
configure:4857: $? = 0
configure:4861: test -z
|| test ! -s conftest.err
configure:4864: $? = 0
configure:4867: test -s conftest.o
configure:4870: $? = 0
configure:4881: result: yes
configure:4907: checking dlfcn.h usability
configure:4919: gcc -c -I/usr/local/include conftest.c >&5
configure:4925: $? = 0
configure:4929: test -z
|| test ! -s conftest.err
configure:4932: $? = 0
configure:4935: test -s conftest.o
configure:4938: $? = 0
configure:4948: result: yes
configure:4952: checking dlfcn.h presence
configure:4962: gcc -E -I/usr/local/include conftest.c
configure:4968: $? = 0
configure:4988: result: yes
configure:5023: checking for dlfcn.h
configure:5030: result: yes
configure:5095: checking for g++
configure:5111: found /usr/bin/g++
configure:5121: result: g++
configure:5137: checking for C++ compiler version
configure:5140: g++ --version </dev/null >&5
g++ (Ubuntu/Linaro 4.7.2-2ubuntu1) 4.7.2
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:5143: $? = 0
configure:5145: g++ -v </dev/null >&5
Using built-in specs.
COLLECT_GCC=g++
COLLECT_LTO_WRAPPER=/usr/lib/gcc/i686-linux-gnu/4.7/lto-wrapper
Target: i686-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.7.2-2ubuntu1' --with-bugurl=file:///usr/share/doc/gcc-4.7/README.Bugs --enable-languages=c,c++,go,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.7 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.7 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --enable-targets=all --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=i686-linux-gnu --host=i686-linux-gnu --target=i686-linux-gnu
Thread model: posix
gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1)
configure:5148: $? = 0
configure:5150: g++ -V </dev/null >&5
g++: error: unrecognized command line option '-V'
g++: fatal error: no input files
compilation terminated.
configure:5153: $? = 4
configure:5156: checking whether we are using the GNU C++ compiler
configure:5180: g++ -c -I/usr/local/include conftest.cc >&5
configure:5186: $? = 0
configure:5190: test -z
|| test ! -s conftest.err
configure:5193: $? = 0
configure:5196: test -s conftest.o
configure:5199: $? = 0
configure:5212: result: yes
configure:5218: checking whether g++ accepts -g
configure:5239: g++ -c -g -I/usr/local/include conftest.cc >&5
configure:5245: $? = 0
configure:5249: test -z
|| test ! -s conftest.err
configure:5252: $? = 0
configure:5255: test -s conftest.o
configure:5258: $? = 0
configure:5269: result: yes
configure:5311: g++ -c -g -O2 -I/usr/local/include conftest.cc >&5
configure:5317: $? = 0
configure:5321: test -z
|| test ! -s conftest.err
configure:5324: $? = 0
configure:5327: test -s conftest.o
configure:5330: $? = 0
configure:5356: g++ -c -g -O2 -I/usr/local/include conftest.cc >&5
conftest.cc: In function 'int main()':
conftest.cc:26:9: error: 'exit' was not declared in this scope
configure:5362: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pctv_gtk"
| #define VERSION "1.4"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
|
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:5311: g++ -c -g -O2 -I/usr/local/include conftest.cc >&5
conftest.cc:22:40: error: 'void std::exit(int)' should have been declared inside 'std'
configure:5317: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pctv_gtk"
| #define VERSION "1.4"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| extern "C" void std::exit (int) throw (); using std::exit;
| #include <stdlib.h>
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:5311: g++ -c -g -O2 -I/usr/local/include conftest.cc >&5
conftest.cc:22:31: error: 'void std::exit(int)' should have been declared inside 'std'
In file included from conftest.cc:23:0:
/usr/include/stdlib.h:544:70: error: declaration of 'void std::exit(int) throw ()' has a different exception specifier
conftest.cc:22:17: error: from previous declaration 'void std::exit(int)'
configure:5317: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pctv_gtk"
| #define VERSION "1.4"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| extern "C" void std::exit (int); using std::exit;
| #include <stdlib.h>
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:5311: g++ -c -g -O2 -I/usr/local/include conftest.cc >&5
configure:5317: $? = 0
configure:5321: test -z
|| test ! -s conftest.err
configure:5324: $? = 0
configure:5327: test -s conftest.o
configure:5330: $? = 0
configure:5356: g++ -c -g -O2 -I/usr/local/include conftest.cc >&5
configure:5362: $? = 0
configure:5366: test -z
|| test ! -s conftest.err
configure:5369: $? = 0
configure:5372: test -s conftest.o
configure:5375: $? = 0
configure:5408: checking how to run the C++ preprocessor
configure:5439: g++ -E -I/usr/local/include conftest.cc
configure:5445: $? = 0
configure:5477: g++ -E -I/usr/local/include conftest.cc
conftest.cc:25:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:5483: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pctv_gtk"
| #define VERSION "1.4"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #ifdef __cplusplus
| extern "C" void exit (int) throw ();
| #endif
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:5522: result: g++ -E
configure:5546: g++ -E -I/usr/local/include conftest.cc
configure:5552: $? = 0
configure:5584: g++ -E -I/usr/local/include conftest.cc
conftest.cc:25:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:5590: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pctv_gtk"
| #define VERSION "1.4"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #ifdef __cplusplus
| extern "C" void exit (int) throw ();
| #endif
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:5687: checking for g77
configure:5716: result: no
configure:5687: checking for f77
configure:5703: found /usr/bin/f77
configure:5713: result: f77
configure:5728: checking for Fortran 77 compiler version
configure:5731: f77 --version </dev/null >&5
/usr/bin/f77: Illegal option: --version
configure:5734: $? = 255
configure:5736: f77 -v </dev/null >&5
/usr/bin/f77: fort77 Version 1.15
/usr/bin/f77: No input files specified
configure:5739: $? = 255
configure:5741: f77 -V </dev/null >&5
/usr/bin/f77 : Missing argument to "-V"
configure:5744: $? = 255
configure:5752: checking whether we are using the GNU Fortran 77 compiler
configure:5766: f77 -c conftest.F >&5
MAIN main:
configure:5772: $? = 0
configure:5776: test -z
|| test ! -s conftest.err
configure:5779: $? = 0
configure:5782: test -s conftest.o
configure:5785: $? = 0
configure:5798: result: yes
configure:5804: checking whether f77 accepts -g
configure:5816: f77 -c -g conftest.f >&5
MAIN main:
configure:5822: $? = 0
configure:5826: test -z
|| test ! -s conftest.err
configure:5829: $? = 0
configure:5832: test -s conftest.o
configure:5835: $? = 0
configure:5847: result: yes
configure:5877: checking the maximum length of command line arguments
configure:5969: result: 32768
configure:5980: checking command to parse /usr/bin/nm -B output from gcc object
configure:6076: gcc -c -I/usr/local/include conftest.c >&5
configure:6079: $? = 0
configure:6083: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm
configure:6086: $? = 0
configure:6138: gcc -o conftest -I/usr/local/include -s conftest.c conftstm.o >&5
configure:6141: $? = 0
configure:6179: result: ok
configure:6183: checking for objdir
configure:6198: result: .libs
configure:6288: checking for ar
configure:6304: found /usr/bin/ar
configure:6315: result: ar
configure:6368: checking for ranlib
configure:6384: found /usr/bin/ranlib
configure:6395: result: ranlib
configure:6448: checking for strip
configure:6464: found /usr/bin/strip
configure:6475: result: strip
configure:6697: checking for correct ltmain.sh version
configure:6711: result: no
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=i686-pc-linux-gnu
ac_cv_build_alias=i686-pc-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_cxx_compiler_gnu=yes
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-I/usr/local/include
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_F77_set=
ac_cv_env_F77_value=
ac_cv_env_FFLAGS_set=
ac_cv_env_FFLAGS_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-s
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_exeext=
ac_cv_f77_compiler_gnu=yes
ac_cv_header_dlfcn_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_unistd_h=yes
ac_cv_host=i686-pc-linux-gnu
ac_cv_host_alias=i686-pc-linux-gnu
ac_cv_lib_cposix_strerror=no
ac_cv_objext=o
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_CPP='gcc -E'
ac_cv_prog_CXXCPP='g++ -E'
ac_cv_prog_ac_ct_AR=ar
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_CXX=g++
ac_cv_prog_ac_ct_F77=f77
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_cc_g=yes
ac_cv_prog_cc_stdc=
ac_cv_prog_cxx_g=yes
ac_cv_prog_egrep='grep -E'
ac_cv_prog_f77_g=yes
ac_cv_prog_make_make_set=yes
am_cv_prog_cc_stdc=
lt_cv_cc_64bit_output=no
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_ld_reload_flag=-r
lt_cv_objdir=.libs
lt_cv_path_LD=/usr/bin/ld
lt_cv_path_NM='/usr/bin/nm -B'
lt_cv_path_SED=/bin/sed
lt_cv_prog_gnu_ld=yes
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern int \1;/p'\'''
lt_cv_sys_max_cmd_len=32768
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='aclocal-1.4'
AR='ar'
AUTOCONF='autoconf'
AUTOHEADER='autoheader'
AUTOMAKE='automake-1.4'
CC='gcc'
CFLAGS=''
CPP='gcc -E'
CPPFLAGS='-I/usr/local/include'
CXX='g++'
CXXCPP='g++ -E'
CXXFLAGS='-g -O2'
DEFS=''
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='grep -E'
EXEEXT=''
F77='f77'
FFLAGS='-g -O2'
GTK_CFLAGS=''
GTK_LIBS=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
LDFLAGS='-s'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LN_S='ln -s'
LTLIBOBJS=''
MAKEINFO='/home/draco/pctv/pctv_gtk-1.4/missing makeinfo'
NO_PREFIX_PACKAGE_DATA_DIR=''
NO_PREFIX_PACKAGE_DOC_DIR=''
NO_PREFIX_PACKAGE_HELP_DIR=''
NO_PREFIX_PACKAGE_MENU_DIR=''
NO_PREFIX_PACKAGE_PIXMAPS_DIR=''
OBJEXT='o'
PACKAGE='pctv_gtk'
PACKAGE_BUGREPORT=''
PACKAGE_DATA_DIR=''
PACKAGE_DOC_DIR=''
PACKAGE_HELP_DIR=''
PACKAGE_MENU_DIR=''
PACKAGE_NAME=''
PACKAGE_PIXMAPS_DIR=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PKG_CONFIG=''
RANLIB='ranlib'
SET_MAKE=''
SHELL='/bin/bash'
STRIP='strip'
VERSION='1.4'
ac_ct_AR='ar'
ac_ct_CC='gcc'
ac_ct_CXX='g++'
ac_ct_F77='f77'
ac_ct_RANLIB='ranlib'
ac_ct_STRIP='strip'
bindir='${exec_prefix}/bin'
build='i686-pc-linux-gnu'
build_alias=''
build_cpu='i686'
build_os='linux-gnu'
build_vendor='pc'
datadir='${prefix}/share'
exec_prefix='NONE'
host='i686-pc-linux-gnu'
host_alias=''
host_cpu='i686'
host_os='linux-gnu'
host_vendor='pc'
includedir='${prefix}/include'
infodir='${prefix}/info'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localstatedir='${prefix}/var'
mandir='${prefix}/man'
oldincludedir='/usr/include'
prefix='NONE'
program_transform_name='s,x,x,'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define HAVE_DLFCN_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STDINT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRINGS_H 1
#define HAVE_STRING_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_UNISTD_H 1
#define PACKAGE "pctv_gtk"
#define PACKAGE_BUGREPORT ""
#define PACKAGE_NAME ""
#define PACKAGE_STRING ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define STDC_HEADERS 1
#define VERSION "1.4"
#endif
#ifdef __cplusplus
extern "C" void exit (int) throw ();
configure: exit 1