redi pc 50 usb tv tuner

[physicist]

καλησπέρα σε όλους. σύνδεσα το redi pc50 usb tv tuner και μου εμφανιστηκε ένα παράθυρο με όνομα hardware drivers το οποίο με ενημερώνει οτι έχει βρεθεί firmware upadate για κάρτες dvb και μου λέει οτι είναι proprietary. προχωρώ κανονικά στην εγκατάσταση που λέει ή πρέπει να κάνω κάτι διαφορετικό? επίσης ποιό πρόγραμμα να χρησιμοποιήσω για να βέπω τηλεόραση? (να σημειώσω οτι είναι ψηφιακός δέκτης)

[the_eye]

Εγκαθιστάς το firmware και με το metv βλέπεις tv.

[SIKAT]

καλημέρα ...
Εγώ είμαι πολύ άσχετος για να καταλάβω αυτό το

" Εγκαθιστάς το firmware και με το metv βλέπεις tv. "


Εχω το USB crypto ReDi PC 50 Α και το CD που το συνόδευε όταν το αγόρασα αυτό το TV Tuner...
Στο CD υπάρχουν κάποιοι Drivers (*.inf) ...

To meTV βγάζει μήνυμα " There are no DVB devices available "

Έβαλα το stick στο usb και στην εντολή lsusb
πήρα τα παρακάτω :

Κώδικας: Επιλογή όλων


Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0489:e00d Foxconn / Hon Hai
Bus 002 Device 007: ID 1f4d:a803 G-Tek Electronics Group
Bus 002 Device 004: ID 5986:0195 Acer, Inc
Bus 002 Device 005: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse


Οταν βγάζω το usb και ξανατρέχω την εντολή lsusb βλέπω ότι έχει αφαιρεθεί η παρακάτω γραμμή
Bus 002 Device 003: ID 1f4d:a803 G-Tek Electronics Group


Σα συσκευή λειτουργεί αφού το έβαλα σε win7 και λειτούγησε κανονικά...

Μήπως υπάρχει βοήθεια ? ? ?

[the_eye]

Δοκίμασε να τρέξεις το

Κώδικας: Επιλογή όλων

jockey-gtk

εκεί λογικά θα βγάλει το fιrmware για εγκατάσταση.

[SIKAT]

Η εντολή jockey-gtk μου έδωσε τα παρακάτω

Κώδικας: Επιλογή όλων



(jockey-gtk:4940): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion `icon_set != NULL' failed

(jockey-gtk:4940): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion `icon_set != NULL' failed



και στο τέλος άνοιξε το παράθυρο των "Ιδιοταγών-κλειστών οδηγών υλικού" όπου δεν υπηρχε κάποιος σχετικός με την κάρτα ....

[the_eye]

Για δώσε και το αποτέλεσμα της εντολής στο τερματικό (θα βγάλει πολλά)

Κώδικας: Επιλογή όλων

dmesg

[the_eye]

Πράγματι πολλά ...

dmesg

Κώδικας: Επιλογή όλων

[ 0.898133] reserve RAM buffer: 00000000bf681000 - 00000000bfffffff
[ 0.898136] reserve RAM buffer: 00000000bf758000 - 00000000bfffffff
[ 0.898138] reserve RAM buffer: 00000000bf7e2000 - 00000000bfffffff
[ 0.898140] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[ 0.898240] NetLabel: Initializing
[ 0.898242] NetLabel: domain hash size = 128
[ 0.898243] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.898253] NetLabel: unlabeled traffic allowed by default
[ 0.898316] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.898321] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.900345] Switching to clocksource hpet
[ 0.902971] Freeing initrd memory: 13844k freed
[ 0.907311] AppArmor: AppArmor Filesystem Enabled
[ 0.907340] pnp: PnP ACPI init
[ 0.907357] ACPI: bus type pnp registered
[ 0.907676] pnp 00:00: [bus 00-fe]
[ 0.907679] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.907681] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.907682] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.907684] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.907686] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.907687] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.907689] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.907690] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.907692] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.907693] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.907695] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.907697] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.907698] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.907700] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.907701] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.907703] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.907705] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.907708] pnp 00:00: [mem 0xc0000000-0xfeafffff window]
[ 0.907710] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.907775] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.924613] pnp 00:01: [io 0x0000-0x001f]
[ 0.924617] pnp 00:01: [io 0x0081-0x0091]
[ 0.924620] pnp 00:01: [io 0x0093-0x009f]
[ 0.924624] pnp 00:01: [io 0x00c0-0x00df]
[ 0.924627] pnp 00:01: [dma 4]
[ 0.924688] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.924695] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.924717] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.924785] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.924810] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.924818] pnp 00:04: [io 0x00f0]
[ 0.924829] pnp 00:04: [irq 13]
[ 0.924855] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.924864] pnp 00:05: [io 0x002e-0x002f]
[ 0.924865] pnp 00:05: [io 0x004e-0x004f]
[ 0.924866] pnp 00:05: [io 0x0061]
[ 0.924868] pnp 00:05: [io 0x0063]
[ 0.924869] pnp 00:05: [io 0x0065]
[ 0.924870] pnp 00:05: [io 0x0067]
[ 0.924872] pnp 00:05: [io 0x0068-0x006f]
[ 0.924873] pnp 00:05: [io 0x0070]
[ 0.924874] pnp 00:05: [io 0x0080]
[ 0.924875] pnp 00:05: [io 0x0092]
[ 0.924877] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.924878] pnp 00:05: [io 0x0680-0x069f]
[ 0.924880] pnp 00:05: [io 0x0800-0x080f]
[ 0.924881] pnp 00:05: [io 0xffff]
[ 0.924882] pnp 00:05: [io 0xffff]
[ 0.924884] pnp 00:05: [io 0x0400-0x047f]
[ 0.924885] pnp 00:05: [io 0x0500-0x057f]
[ 0.924886] pnp 00:05: [io 0x164e-0x164f]
[ 0.924901] pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 13 [io 0x1000-0x1fff]
[ 0.924950] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.924952] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.924954] system 00:05: [io 0xffff] has been reserved
[ 0.924956] system 00:05: [io 0xffff] has been reserved
[ 0.924958] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.924960] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.924963] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.924969] pnp 00:06: [io 0x0070-0x0077]
[ 0.924974] pnp 00:06: [irq 8]
[ 0.924998] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.925052] pnp 00:07: [irq 12]
[ 0.925079] pnp 00:07: Plug and Play ACPI device, IDs ETD0601 PNP0f13 (active)
[ 0.925086] pnp 00:08: [io 0x0060]
[ 0.925088] pnp 00:08: [io 0x0064]
[ 0.925092] pnp 00:08: [irq 1]
[ 0.925116] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.925480] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.925482] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[ 0.925484] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 0.925485] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 0.925487] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.925488] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.925490] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[ 0.925492] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 0.925493] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.925494] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 0.925496] pnp 00:09: [mem 0xdb200000-0xdb200fff]
[ 0.925555] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.925557] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.925559] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.925562] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.925564] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.925566] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.925568] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.925570] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.925572] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.925574] system 00:09: [mem 0xdb200000-0xdb200fff] has been reserved
[ 0.925576] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.925695] pnp 00:0a: [bus ff]
[ 0.925732] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.925745] pnp: PnP ACPI: found 11 devices
[ 0.925746] ACPI: ACPI bus type pnp unregistered
[ 0.925749] PnPBIOS: Disabled by ACPI PNP
[ 0.962798] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.962802] pci 0000:07:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.962807] PCI: max bus depth: 1 pci_try_num: 2
[ 0.962860] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[ 0.962862] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.962864] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.962867] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.962870] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.962873] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[ 0.962876] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.962882] pci 0000:00:1c.0: bridge window [mem 0xda100000-0xdb0fffff]
[ 0.962886] pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[ 0.962893] pci 0000:00:1c.1: PCI bridge to [bus 06-06]
[ 0.962896] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.962902] pci 0000:00:1c.1: bridge window [mem 0xd9100000-0xda0fffff]
[ 0.962907] pci 0000:00:1c.1: bridge window [mem 0xd4100000-0xd50fffff 64bit pref]
[ 0.962916] pci 0000:07:00.0: BAR 6: assigned [mem 0xd5120000-0xd513ffff pref]
[ 0.962917] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[ 0.962920] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.962927] pci 0000:00:1c.2: bridge window [mem 0xd8100000-0xd90fffff]
[ 0.962931] pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd60fffff 64bit pref]
[ 0.962939] pci 0000:00:1c.4: PCI bridge to [bus 08-0b]
[ 0.962942] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.962948] pci 0000:00:1c.4: bridge window [mem 0xd7100000-0xd80fffff]
[ 0.962953] pci 0000:00:1c.4: bridge window [mem 0xd6100000-0xd70fffff 64bit pref]
[ 0.962960] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[ 0.962985] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.962988] pci 0000:00:01.0: setting latency timer to 64
[ 0.962998] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.963003] pci 0000:00:1c.0: setting latency timer to 64
[ 0.963010] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.963014] pci 0000:00:1c.1: setting latency timer to 64
[ 0.963023] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.963028] pci 0000:00:1c.2: setting latency timer to 64
[ 0.963035] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.963039] pci 0000:00:1c.4: setting latency timer to 64
[ 0.963047] pci 0000:00:1e.0: setting latency timer to 64
[ 0.963051] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.963053] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.963054] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.963056] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[ 0.963058] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.963059] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.963061] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.963063] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.963065] pci_bus 0000:02: resource 1 [mem 0xda100000-0xdb0fffff]
[ 0.963067] pci_bus 0000:02: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref]
[ 0.963068] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.963070] pci_bus 0000:06: resource 1 [mem 0xd9100000-0xda0fffff]
[ 0.963072] pci_bus 0000:06: resource 2 [mem 0xd4100000-0xd50fffff 64bit pref]
[ 0.963074] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.963075] pci_bus 0000:07: resource 1 [mem 0xd8100000-0xd90fffff]
[ 0.963077] pci_bus 0000:07: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref]
[ 0.963079] pci_bus 0000:08: resource 0 [io 0x1000-0x1fff]
[ 0.963080] pci_bus 0000:08: resource 1 [mem 0xd7100000-0xd80fffff]
[ 0.963082] pci_bus 0000:08: resource 2 [mem 0xd6100000-0xd70fffff 64bit pref]
[ 0.963084] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
[ 0.963086] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
[ 0.963087] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.963089] pci_bus 0000:0c: resource 7 [mem 0xc0000000-0xfeafffff]
[ 0.963121] NET: Registered protocol family 2
[ 0.963177] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.963328] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.963541] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.963644] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.963646] TCP reno registered
[ 0.963648] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.963653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.963713] NET: Registered protocol family 1
[ 0.963735] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.976583] pci 0000:00:1a.0: PCI INT A disabled
[ 0.976625] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.992564] pci 0000:00:1d.0: PCI INT A disabled
[ 0.992614] pci 0000:01:00.0: Boot video device
[ 0.992688] PCI: CLS 64 bytes, default 64
[ 0.992694] Simple Boot Flag at 0x44 set to 0x1
[ 0.993138] audit: initializing netlink socket (disabled)
[ 0.993145] type=2000 audit(1358695190.672:1): initialized
[ 1.012426] highmem bounce pool size: 64 pages
[ 1.012430] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.014481] VFS: Disk quotas dquot_6.5.2
[ 1.014526] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.014970] fuse init (API version 7.17)
[ 1.015053] msgmni has been set to 1643
[ 1.015439] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.015469] io scheduler noop registered
[ 1.015471] io scheduler deadline registered
[ 1.015477] io scheduler cfq registered (default)
[ 1.015562] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.015587] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.015843] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.015861] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.015909] intel_idle: MWAIT substates: 0x1120
[ 1.015910] intel_idle: v0.4 model 0x25
[ 1.015911] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.016153] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.016330] ACPI: AC Adapter [ACAD] (on-line)
[ 1.016422] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0C:00/input/input0
[ 1.016450] ACPI: Power Button [PWRB]
[ 1.016483] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0E:00/input/input1
[ 1.016486] ACPI: Sleep Button [SLPB]
[ 1.016610] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0D:00/input/input2
[ 1.016673] ACPI: Lid Switch [LID0]
[ 1.016742] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.016745] ACPI: Power Button [PWRF]
[ 1.037838] ACPI: Invalid active0 threshold
[ 1.038100] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.038104] ACPI: Thermal Zone [TZ00] (66 C)
[ 1.038133] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.038140] ACPI: Battery Slot [BAT1] (battery present)
[ 1.038171] ERST: Table is not found!
[ 1.038172] GHES: HEST is not enabled!
[ 1.038238] isapnp: Scanning for PnP cards...
[ 1.038258] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.267340] ACPI: Battery Slot [BAT1] (battery present)
[ 1.393215] isapnp: No Plug & Play device found
[ 1.424845] Linux agpgart interface v0.103
[ 1.426246] brd: module loaded
[ 1.426941] loop: module loaded
[ 1.427043] ahci 0000:00:1f.2: version 3.0
[ 1.427060] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.427099] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.427132] ahci: SSS flag set, parallel bus scan disabled
[ 1.427174] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[ 1.427177] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.427181] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.440786] scsi0 : ahci
[ 1.440868] scsi1 : ahci
[ 1.440938] scsi2 : ahci
[ 1.441010] scsi3 : ahci
[ 1.441082] scsi4 : ahci
[ 1.441121] ata1: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105100 irq 41
[ 1.441124] ata2: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105180 irq 41
[ 1.441125] ata3: DUMMY
[ 1.441126] ata4: DUMMY
[ 1.441129] ata5: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105300 irq 41
[ 1.441453] Fixed MDIO Bus: probed
[ 1.441467] tun: Universal TUN/TAP device driver, 1.6
[ 1.441469] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.441517] PPP generic driver version 2.4.2
[ 1.441604] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.441618] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.441632] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.441635] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.441677] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.441702] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.445630] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.445646] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdb105c00
[ 1.460378] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.460535] hub 1-0:1.0: USB hub found
[ 1.460539] hub 1-0:1.0: 3 ports detected
[ 1.460595] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.460607] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.460610] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.460651] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.460674] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.464622] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.464635] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdb105800
[ 1.480370] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.480516] hub 2-0:1.0: USB hub found
[ 1.480519] hub 2-0:1.0: 3 ports detected
[ 1.480573] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.480583] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.480620] usbcore: registered new interface driver libusual
[ 1.480655] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS3] at 0x60,0x64 irq 1,12
[ 1.494911] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.494916] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.495023] mousedev: PS/2 mouse device common for all mice
[ 1.496699] rtc_cmos 00:06: RTC can wake from S4
[ 1.496811] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.496842] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.496887] device-mapper: uevent: version 1.0.3
[ 1.496956] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.496980] EISA: Probing bus 0 at eisa.0
[ 1.496981] EISA: Cannot allocate resource for mainboard
[ 1.496983] Cannot allocate resource for EISA slot 1
[ 1.496984] Cannot allocate resource for EISA slot 2
[ 1.496985] Cannot allocate resource for EISA slot 3
[ 1.496987] Cannot allocate resource for EISA slot 4
[ 1.496988] Cannot allocate resource for EISA slot 5
[ 1.496989] Cannot allocate resource for EISA slot 6
[ 1.496990] Cannot allocate resource for EISA slot 7
[ 1.496991] Cannot allocate resource for EISA slot 8
[ 1.496992] EISA: Detected 0 cards.
[ 1.497001] cpufreq-nforce2: No nForce2 chipset.
[ 1.497087] cpuidle: using governor ladder
[ 1.497224] cpuidle: using governor menu
[ 1.497225] EFI Variables Facility v0.08 2004-May-17
[ 1.497392] TCP cubic registered
[ 1.497483] NET: Registered protocol family 10
[ 1.497871] NET: Registered protocol family 17
[ 1.497875] Registering the dns_resolver key type
[ 1.497894] Using IPI No-Shortcut mode
[ 1.498013] PM: Hibernation image not present or could not be loaded.
[ 1.498022] registered taskstats version 1
[ 1.509850] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.511359] Magic number: 13:333:336
[ 1.511391] tty tty57: hash matches
[ 1.511494] rtc_cmos 00:06: setting system clock to 2013-01-20 15:19:51 UTC (1358695191)
[ 1.512216] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.512217] EDD information not available.
[ 1.760352] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.762698] ata1.00: ATA-8: WDC WD5000BEVT-24A0RT0, 01.01A02, max UDMA/133
[ 1.762704] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.765181] ata1.00: configured for UDMA/133
[ 1.765533] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-2 01.0 PQ: 0 ANSI: 5
[ 1.765786] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.765814] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.765979] sd 0:0:0:0: [sda] Write Protect is off
[ 1.765982] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.766142] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.772290] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.841795] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.843724] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.905191] hub 1-1:1.0: USB hub found
[ 1.905371] hub 1-1:1.0: 6 ports detected
[ 1.992217] Refined TSC clocksource calibration: 2527.437 MHz.
[ 1.992225] Switching to clocksource tsc
[ 2.016233] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.084215] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.085913] ata2.00: ATAPI: MATSHITADVD-RAM UJ890, SB51, max UDMA/100
[ 2.088559] ata2.00: configured for UDMA/100
[ 2.092464] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890 SB51 PQ: 0 ANSI: 5
[ 2.095634] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.095640] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.095879] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.096005] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.149261] hub 2-1:1.0: USB hub found
[ 2.149411] hub 2-1:1.0: 8 ports detected
[ 2.220406] usb 1-1.4: new full-speed USB device number 3 using ehci_hcd
[ 2.416086] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.416382] Freeing unused kernel memory: 744k freed
[ 2.416620] Write protecting the kernel text: 5828k
[ 2.416676] Write protecting the kernel read-only data: 2380k
[ 2.416677] NX-protecting the kernel data: 4412k
[ 2.420146] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
[ 2.434263] udevd[105]: starting version 175
[ 2.475892] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.475932] r8169 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.476014] r8169 0000:07:00.0: setting latency timer to 64
[ 2.476216] r8169 0000:07:00.0: irq 42 for MSI/MSI-X
[ 2.476834] r8169 0000:07:00.0: eth0: RTL8102e at 0xf8418000, 88:ae:1d:dd:30:2d, XID 04e00000 IRQ 42
[ 2.604133] usb 2-1.3: new high-speed USB device number 4 using ehci_hcd
[ 2.784024] usb 2-1.4: new low-speed USB device number 5 using ehci_hcd
[ 2.886680] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5
[ 2.886786] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[ 2.886797] usbcore: registered new interface driver usbhid
[ 2.886798] usbhid: USB HID core driver
[ 3.342755] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 24.022105] Adding 4048892k swap on /dev/sda7. Priority:-1 extents:1 across:4048892k
[ 24.151833] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.158222] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 24.175517] udevd[460]: starting version 175
[ 24.211457] lp: driver loaded but no devices found
[ 24.241942] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 24.242324] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.242332] mei 0000:00:16.0: setting latency timer to 64
[ 24.242406] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 24.249460] lib80211: common routines for IEEE802.11 drivers
[ 24.249464] lib80211_crypt: registered algorithm 'NULL'
[ 24.256736] Bluetooth: Core ver 2.16
[ 24.256761] NET: Registered protocol family 31
[ 24.256764] Bluetooth: HCI device and connection manager initialized
[ 24.256767] Bluetooth: HCI socket layer initialized
[ 24.256769] Bluetooth: L2CAP socket layer initialized
[ 24.256775] Bluetooth: SCO socket layer initialized
[ 24.257185] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 24.260526] nvidia: module license 'NVIDIA' taints kernel.
[ 24.260531] Disabling lock debugging due to kernel taint
[ 24.267677] wl 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 24.267690] wl 0000:06:00.0: setting latency timer to 64
[ 24.270930] usbcore: registered new interface driver btusb
[ 24.307610] wmi: Mapper loaded
[ 24.312499] lib80211_crypt: registered algorithm 'TKIP'
[ 24.329014] acpi device:0b: registered as cooling_device4
[ 24.329425] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input6
[ 24.329772] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 24.349969] Linux video capture interface: v2.00
[ 24.350538] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0195)
[ 24.373469] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input7
[ 24.373553] usbcore: registered new interface driver uvcvideo
[ 24.373556] USB Video Class driver (1.1.1)
[ 24.384196] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 24.384229] intel ips 0000:00:1f.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 24.384307] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 24.386235] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 24.387755] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.38
[ 24.403539] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 24.403547] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 24.403557] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.403570] nvidia 0000:01:00.0: setting latency timer to 64
[ 24.403576] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 24.403747] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.43 Sun Aug 19 20:20:21 PDT 2012
[ 24.404915] input: Ideapad extra buttons as /devices/platform/ideapad/input/input8
[ 24.438056] type=1400 audit(1358688014.431:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=656 comm="apparmor_parser"
[ 24.438648] type=1400 audit(1358688014.431:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=656 comm="apparmor_parser"
[ 24.438930] type=1400 audit(1358688014.431:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=656 comm="apparmor_parser"
[ 24.442934] type=1400 audit(1358688014.435:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=724 comm="apparmor_parser"
[ 24.469693] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 24.469701] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 24.469725] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 24.470577] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 24.470608] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 24.512714] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 24.512719] hda_intel: Disabling MSI
[ 24.512765] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 24.524170] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.524173] Bluetooth: BNEP filters: protocol multicast
[ 24.529704] Bluetooth: RFCOMM TTY layer initialized
[ 24.529710] Bluetooth: RFCOMM socket layer initialized
[ 24.529712] Bluetooth: RFCOMM ver 1.11
[ 24.552046] ppdev: user-space parallel port driver
[ 24.589912] type=1400 audit(1358688014.583:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=888 comm="apparmor_parser"
[ 24.590355] type=1400 audit(1358688014.583:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=888 comm="apparmor_parser"
[ 24.603696] init: failsafe main process (856) killed by TERM signal
[ 24.642967] type=1400 audit(1358688014.635:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=945 comm="apparmor_parser"
[ 24.643488] type=1400 audit(1358688014.635:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=945 comm="apparmor_parser"
[ 24.644443] type=1400 audit(1358688014.639:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=945 comm="apparmor_parser"
[ 24.649293] type=1400 audit(1358688014.643:11): apparmor="STATUS" operation="profile_load" name="lxc-container-default" pid=944 comm="apparmor_parser"
[ 24.677222] r8169 0000:07:00.0: eth0: link down
[ 24.677444] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.677975] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.814203] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x140000)
[ 24.872884] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x18, 0x0b.
[ 24.898517] Bridge firewalling registered
[ 24.910019] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.918876] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 25.195432] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 25.359394] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 25.383427] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 25.407318] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 25.431355] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 25.431481] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[ 25.431635] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 25.431705] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 25.431773] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 25.709068] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 26.410936] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 26.838216] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 26.838219] vesafb: scrolling: redraw
[ 26.838221] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 26.840347] vesafb: framebuffer at 0xd1000000, mapped to 0xf8900000, using 1216k, total 1216k
[ 26.840488] fbcon: VESA VGA (fb0) is primary device
[ 26.840558] Console: switching to colour frame buffer device 80x30
[ 26.840573] fb0: VESA VGA frame buffer device
[ 27.033144] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input13
[ 28.915743] NVRM: GPU at 0000:01:00: GPU-8e1c0aca-11b9-8b9d-35a2-58488dc1afcb
[ 28.915750] NVRM: Your system is not currently configured to drive a VGA console
[ 28.915753] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 28.915755] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 28.915757] NVRM: drivers including, but not limited to, vesafb, may result in
[ 28.915759] NVRM: corruption and stability problems, and is not supported.
[ 34.959640] lxcbr0: no IPv6 routers present
[ 37.374770] eth1: no IPv6 routers present
[ 48.932575] init: mythtv-backend main process (2299) terminated with status 130
[ 48.932599] init: mythtv-backend main process ended, respawning
[ 49.320004] init: mythtv-backend main process (2320) terminated with status 130
[ 49.320027] init: mythtv-backend main process ended, respawning
[ 49.708537] init: mythtv-backend main process (2337) terminated with status 130
[ 49.708561] init: mythtv-backend respawning too fast, stopped

Δε ξέρω πως να τα πάρω όλα γιατί από ότι είδα κάνοντας copy από το Terminal τίς πρώτες γραμμές δε τίς πήρα...
(εννοώ κάποια εντολή που να δίνει τα αποτελέσματα ανα page όπως κάποτε με DOS το |p)

[the_eye]

Έχεις εγκαταστήσει το mythtv, καλό είναι να το αφαιρέσεις.

[SIKAT]

OK To αφαίρεσα . ....

[the_eye]

Δοκίμασε να τρέξεις το tvtime.

Ανανέωσε αν θες και την υπογραφή σου με το παρακάτω script.

!

Μήνυμα ενημέρωσης προς τον/την Σε παρακαλούμε να διαβάσεις τις οδηγίες προς νεοεισερχόμενους προσεκτικά. Είναι σημαντική η προσάρτηση της υπογραφής με τα χαρακτηριστικά του υπολογιστή σου hardware id (πχ [10ec:8168]), έτσι ώστε να δίνονται συγκεκριμένες πληροφορίες όταν πρόκειται για επίλυση ενός προβλήματός σου. Οι αλλαγές μπορούν να γίνουν από τον πίνακα ελέγχου αλλά και με το αυτόματο script που θα το βρεις παρακάτω. Αυτόματο script υπογραφής