Έλεγχος σκληρού δίσκου Hardware

[akounadis]

Πριν ένα χρόνο...

Κώδικας: Επιλογή όλων

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always - 2750
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2162
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 2760
10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 1
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1111
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 892
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 77
194 Temperature_Celsius 0x0022 112 097 000 Old_age Always - 42 (Lifetime Min/Max 16/47)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x0032 252 252 000 Old_age Always - 0
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 16
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 808

...τώρα

Κώδικας: Επιλογή όλων

=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M6
Device Model: SAMSUNG HM320JI
Serial Number: S1G3JD0S426075
LU WWN Device Id: 5 0f0000 003426075
Firmware Version: 2SS00_03
User Capacity: 320.072.933.376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Sat Nov 24 18:05:37 2012 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 112) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always - 2812
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2904
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 3918
10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 1
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1499
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1005
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 111
194 Temperature_Celsius 0x0022 133 097 000 Old_age Always - 35 (Min/Max 16/47)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x0032 252 252 000 Old_age Always - 0
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 16
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 808

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Πως τον βλέπεται;
Υπάρχει κάποιος οδηγός-πληροφορίες με λεπτομέρειες για τον κάθε χαρακτηρισμό;

[fkol k4]

Πως τον βλέπεται;
Υπάρχει κάποιος οδηγός-πληροφορίες με λεπτομέρειες για τον κάθε χαρακτηρισμό;

Εντάξει είναι, απόφευγε να κουνάς το λάπτοπ όσο είναι σε λειτουργία όμως:

Κώδικας: Επιλογή όλων

191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1005

Οδηγός για τα βασικά attributes εδώ και λεπτομερής ανάλυση (Αγγλικά) εδώ.

[akounadis]

Ευχαριστώ !!

[Learner]

Εντάξει είναι, απόφευγε να κουνάς το λάπτοπ όσο είναι σε λειτουργία όμως:

Αν και αυτό σε ορισμένες περιπτώσεις δεν παίζει και τόσο σημασία .. μερικοί σενσορες είναι τόσο ευαίσθητοι , όπου και να γράφεις στο πληκτρολόγιο το "αισθάνονται" σαν κραδασμό. Π.χ στο δικό μου λαπτοπ η συγκεκριμένη τιμή αυξάνεται , χωρίς βέβαια να κουνάω το λαπτοπ όταν είναι ανοιχτό.

[freefour]

Κοιτατε λιγο και τον δικο μου δισκο; Toν ελεγξα με GSmartControl.

Κώδικας: Επιλογή όλων

smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.5.0-22-generic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST3500320AS
Serial Number: 9QMAQQYV
LU WWN Device Id: 5 000c50 010f67e20
Firmware Version: SD1A
User Capacity: 500,106,780,160 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Jan 26 09:14:22 2013 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 41) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 625) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 089 006 Pre-fail Always - 148156287
3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4526
5 Reallocated_Sector_Ct 0x0033 082 082 036 Pre-fail Always - 370
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 21866118138
9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 12909
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 6
12 Power_Cycle_Count 0x0032 096 037 020 Old_age Always - 4164
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 5150
188 Command_Timeout 0x0032 100 087 000 Old_age Always - 2289254140199
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 055 041 045 Old_age Always In_the_past 45 (4 116 45 45 0)
194 Temperature_Celsius 0x0022 045 059 000 Old_age Always - 45 (0 6 0 0 0)
195 Hardware_ECC_Recovered 0x001a 036 016 000 Old_age Always - 148156287
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 5255 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 5255 occurred at disk power-on lifetime: 11634 hours (484 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 00 00:05:08.475 IDENTIFY DEVICE
a1 00 00 00 00 00 a0 00 00:05:08.475 IDENTIFY PACKET DEVICE
ec 00 01 01 00 00 a0 00 00:03:43.405 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:03:42.968 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:03:39.552 NOP [Abort queued commands]

Error 5254 occurred at disk power-on lifetime: 11634 hours (484 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 00 00 00 00 a0 00 00:05:08.475 IDENTIFY PACKET DEVICE
ec 00 01 01 00 00 a0 00 00:03:43.405 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:03:42.968 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:03:39.552 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:03:39.299 NOP [Abort queued commands]

Error 5253 occurred at disk power-on lifetime: 11634 hours (484 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 01 01 00 00 a0 00 00:03:43.405 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:03:42.968 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:03:39.552 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:03:39.299 NOP [Abort queued commands]
ec 00 01 01 00 00 a0 00 00:03:04.447 IDENTIFY DEVICE

Error 5252 occurred at disk power-on lifetime: 11634 hours (484 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 01 01 00 00 a0 00 00:03:04.447 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:03:03.962 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:03:00.577 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:03:00.324 NOP [Abort queued commands]
ec 00 01 01 00 00 a0 00 00:02:22.726 IDENTIFY DEVICE

Error 5251 occurred at disk power-on lifetime: 11634 hours (484 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 01 01 00 00 a0 00 00:02:22.726 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:02:22.288 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:02:18.872 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:02:18.620 NOP [Abort queued commands]
35 00 08 00 4d 04 e0 00 00:02:12.500 WRITE DMA EXT

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 00% 12909 -
# 2 Extended offline Interrupted (host reset) 00% 12884 -
# 3 Short offline Completed without error 00% 12883 -
# 4 Short offline Completed without error 00% 12271 -
# 5 Short offline Completed without error 00% 12269 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[fkol k4]

Κώδικας: Επιλογή όλων

5 Reallocated_Sector_Ct 0x0033 082 082 036 Pre-fail Always - 370
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 5150

Εδώ έχεις κάποια σφάλματα, καλό είναι να έχεις το νου σου.

Κώδικας: Επιλογή όλων

190 Airflow_Temperature_Cel 0x0022 055 041 045 Old_age Always In_the_past 45 (4 116 45 45 0)

Αυτό το "In_the_past" σημαινει πως ο δίσκος σε κάποια στιγμή είχε ανεβάσει θερμοκρασία πέραν του ορίου. Τσέκαρε τις θερμοκρασίες σου και κοίταξε μήπως θέλει και κανένα καθάρισμα ο υπολογιστής.

[the_eye]

Έχεις μεγάλο πρόβλημα

Κώδικας: Επιλογή όλων

7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 21866118138
188 Command_Timeout 0x0032 100 087 000 Old_age Always - 2289254140199
195 Hardware_ECC_Recovered 0x001a 036 016 000 Old_age Always - 148156287

σου προτείνω να πάρεις backup άμεσα.

[freefour]

Δεν περιμενα καλο αποτελεσμα για τον δισκο αυτον. Ειναι στους 46°C τωρα.
Περιμενω (μαλλον την ερχομενη τριτη) δυο καινουγιους δισκους. Μολις τους βαλω θα κοιταξουμε και αυτους αν ειναι για να δουμε αν ειναι οκ.
Ευχαριστω πολυ!

[freefour]

Δεν το πιστευω...εγραφα μια ωρα, και μολις πατησα ''Υποβολη'' για να σταλθει, ειδα οτι ειμαι εκτος συνδεσης και χαθηκε οτι εγραφα. lol'

Έχεις μεγάλο πρόβλημα

Κώδικας: Επιλογή όλων

7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 21866118138
188 Command_Timeout 0x0032 100 087 000 Old_age Always - 2289254140199
195 Hardware_ECC_Recovered 0x001a 036 016 000 Old_age Always - 148156287

σου προτείνω να πάρεις backup άμεσα.

Το προβλημα αφορα μονο τον παραπανω δισκο sda, και οχι γενικοτερα με το pc ετσι; Backup εχω παρει ευχαριστω!
Ρωταω γιατι πριν μια εβδομαδα καηκε ο δευτερος δισκος που ειχα Linux, ο sdb. Ενταξη τους κακομεταχειριστηκα αρκετα τους δισκους, ενα με τα πολλα φορματ (ειδικα στον sdb) και το pc εδω και 3 χρονια δουλευε με ενα ανεμηστηρακι, το αλλο χαλασε. Τωρα που θα παω στο καταστημα για να βαλει το παιδι τους δισκους, θα αφησω και το pc να κανει ενα καθαρισμα. Εχετε κατι να προτεινετε να του πω να μου κανει ακομη στο pc, εκτος απ το να το καθαριση και να μου αλαξη και το ανεμηστηρακι; (και εκτος οτι θα μου αφερεση την 3GB ram που εχω τωρα και θα προσθεση 6GB ram.) Να ρωτισω και κατι ακομα; Τα πολλα φορματ επιβαρυνουν αρκετα την κατασταση του δισκου;

[the_eye]

Το προβλημα αφορα μονο τον παραπανω δισκο sda, και οχι γενικοτερα με το pc ετσι;

Το SMART δείχνει την κατάσταση του δίσκου, δεν μπορεί να δείξει στοιχεία για το pc.

Τα πολλα φορματ επιβαρυνουν αρκετα την κατασταση του δισκου;

Όχι.