Πρόβλημα με τη κάρτα γραφικών???

από **loukianos** » 30 Απρ 2013, 18:20

Καλησπέρα σε όλους!!! Παρόλο που χρησιμοποιώ το ubuntu από την έκδοση 7.10 είναι η πρώτη φορά που απευθύνομαι στο φόρουμ. Για αυτό και θέλω να σας ευχαριστήσω όλους που όλα αυτά τα χρόνια με βοηθήσατε να επιλύσω τα διάφορα μικροπροβλήματα που είχα!
Ελπίζω κ. Διαχειριστά να ήταν ορθή η επιλογή μου να γράψω στο συγκεκριμένο post, καθώς έχω και εγώ παρόμοιο πρόβλημα όπως ο φίλος buenaventura, όχι όμως τόσο έντονο.
Ανοίγει και εδώ το γνωστό παράθυρο: “Apport has detected a possible GPU hang. Did your system recently lock up and/or require a hard reboot?” και στη συνέχεια άνοιξα τις λεπτομέρειες:
►ExecutablePath
/user/share/apport/apport-gpu-error-intel.py
►Package
xserver-xorg-video-intel (not installed)
►Problem type
crash
►Title
[sandybridge-m-gt1] GPU lockup IPEHR:0x23002000 IPEHR:0x0b140001
►Apport Version
2.0.1-0ubuntu 17.1
κλπ.
Βλέποντας πως το συγκεκριμένο πακέτο δεν είναι εγκατεστημένο, άνοιξα το synaptic να ελέγξω μήπως και μπορώ να το εγκαταστήσω, ωστόσο βρήκα τα εξής:
xserver-xorg-video-intel-lts-quantal-dbg (not installed)
xserver-xorg-video-intel-dbg (not installed)
xserver-xorg-video-intel-lts-quantal (installed)
xserver-xorg-video-intel (not installed)
xserver-xorg-video-i740 (not installed)
Και δεν ήξερα τι να κάνω, καθώς αν κάτι εγκαταστήσω κάτι άλλο θα απεγκατασταθεί.
Ελπίζω να βοηθώ στην κατανόηση και τελικά στην λύση του προβλήματος από κάποιον ειδικό.
Όπως ζήτησε ο eliasps αναρτώ το dmesg.txt. Ελπίζω πως το έκανα όπως το ζήτησε:

Κώδικας: Επιλογή όλων: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-27-generic (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #46~precise1-Ubuntu SMP Tue Mar 26 19:33:56 UTC 2013 (Ubuntu 3.5.0-27.46~precise1-generic 3.5.7.7) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000793befff] usable [ 0.000000] BIOS-e820: [mem 0x00000000793bf000-0x0000000079ebefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079ebf000-0x0000000079fbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079fbf000-0x0000000079ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000079fff000-0x0000000079ffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007e9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard Compaq CQ58 Notebook PC/1858, BIOS F.22 09/05/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07A000000 mask FFE000000 uncachable [ 0.000000] 2 base 07C000000 mask FFC000000 uncachable [ 0.000000] 3 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 4 base 100000000 mask FFF800000 write-back [ 0.000000] 5 base 100600000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff] [ 0.000000] [mem 0x00000000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x379fffff] page 2M [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff] [ 0.000000] RAMDISK: [mem 0x36266000-0x3712afff] [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 79ffe210 000AC (v01 HPQOEM SLIC-MPC 00000001 HP 01000013) [ 0.000000] ACPI: FACP 79ffb000 0010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: DSDT 79fe7000 10288 (v01 HPQOEM INSYDE 00000000 ACPI 00040000) [ 0.000000] ACPI: FACS 79fb9000 00040 [ 0.000000] ACPI: UEFI 79ffd000 00236 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: ASF! 79ffc000 000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: HPET 79ffa000 00038 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: APIC 79ff9000 0008C (v03 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: MCFG 79ff8000 0003C (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: WDAT 79fe6000 00224 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 79fe5000 00166 (v01 HPQOEM INSYDE 00001000 ACPI 00040000) [ 0.000000] ACPI: BOOT 79fe3000 00028 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: ASPT 79fe1000 00034 (v07 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: DBGP 79fe0000 00034 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: FPDT 79fde000 00044 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 79fdc000 00860 (v01 HPQOEM INSYDE 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 79fdb000 00A92 (v01 HPQOEM INSYDE 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 79fda000 002D7 (v01 HPQOEM INSYDE 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 79fd9000 00348 (v01 HPQOEM INSYDE 00003000 ACPI 00040000) [ 0.000000] ACPI: BGRT 79fd8000 00038 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3210MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x005fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0x793befff] [ 0.000000] node 0: [mem 0x79fff000-0x79ffffff] [ 0.000000] node 0: [mem 0x00000000-0x005fffff] [ 0.000000] On node 0 totalpages: 496973 [ 0.000000] free_area_init_node: node 0, pgdat c18c3b40, node_mem_map f4256200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 221990 pages, LIFO batch:31 [ 0.000000] HighMem zone: 6421 pages used for memmap [ 0.000000] HighMem zone: 262829 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] e820: [mem 0x7ea00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7b7b000 s34176 r0 d23168 u57344 [ 0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 488768 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-27-generic root=UUID=bacaf4dc-63e1-4ce9-ad50-9db310df9089 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 8400768 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:00100600) [ 0.000000] Memory: 1919104k/4200448k available (6051k kernel code, 68788k reserved, 2975k data, 760k init, 1077000k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc18d1000 - 0xc198f000 ( 760 kB) [ 0.000000] .data : 0xc15e8d15 - 0xc18d0a00 (2975 kB) [ 0.000000] .text : 0xc1000000 - 0xc15e8d15 (6051 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:744 16 [ 0.000000] CPU 0 irqstacks, hard=f3c0a000 soft=f3c0c000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 1795.774 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.54 BogoMIPS (lpj=7183096) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000032] Security Framework initialized [ 0.000047] AppArmor: AppArmor initialized [ 0.000048] Yama: becoming mindful. [ 0.000099] Mount-cache hash table entries: 512 [ 0.000329] Initializing cgroup subsys cpuacct [ 0.000332] Initializing cgroup subsys memory [ 0.000340] Initializing cgroup subsys devices [ 0.000342] Initializing cgroup subsys freezer [ 0.000344] Initializing cgroup subsys blkio [ 0.000346] Initializing cgroup subsys perf_event [ 0.000379] CPU: Physical Processor ID: 0 [ 0.000380] CPU: Processor Core ID: 0 [ 0.000385] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000385] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000389] mce: CPU supports 7 MCE banks [ 0.000402] CPU0: Thermal monitoring enabled (TM1) [ 0.000411] using mwait in idle threads. [ 0.003183] ACPI: Core revision 20120320 [ 0.032892] ftrace: allocating 27135 entries in 53 pages [ 0.050273] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.050699] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.090369] CPU0: Intel(R) Celeron(R) CPU B830 @ 1.80GHz stepping 07 [ 0.195876] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.195884] PEBS disabled due to CPU errata. [ 0.195886] ... version: 3 [ 0.195887] ... bit width: 48 [ 0.195889] ... generic registers: 8 [ 0.195891] ... value mask: 0000ffffffffffff [ 0.195892] ... max period: 000000007fffffff [ 0.195894] ... fixed-purpose events: 3 [ 0.195895] ... event mask: 00000007000000ff [ 0.196082] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.196186] CPU 1 irqstacks, hard=f3d80000 soft=f3d82000 [ 0.206415] Initializing CPU#1 [ 0.196187] Booting Node 0, Processors #1 [ 0.209373] Brought up 2 CPUs [ 0.209377] Total of 2 processors activated (7183.09 BogoMIPS). [ 0.211063] devtmpfs: initialized [ 0.211279] EVM: security.selinux [ 0.211281] EVM: security.SMACK64 [ 0.211282] EVM: security.capability [ 0.211372] PM: Registering ACPI NVS region [mem 0x79ebf000-0x79fbefff] (1048576 bytes) [ 0.212470] dummy: [ 0.212504] RTC time: 1:07:25, date: 04/20/13 [ 0.212550] NET: Registered protocol family 16 [ 0.212629] Trying to unpack rootfs image as initramfs... [ 0.212704] EISA bus registered [ 0.212793] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.212795] ACPI: bus type pci registered [ 0.212868] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.212871] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.212872] PCI: Using MMCONFIG for extended config space [ 0.212874] PCI: Using configuration type 1 for base access [ 0.213937] bio: create slab <bio-0> at 0 [ 0.214029] ACPI: Added _OSI(Module Device) [ 0.214032] ACPI: Added _OSI(Processor Device) [ 0.214034] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.214036] ACPI: Added _OSI(Processor Aggregator Device) [ 0.216574] ACPI: EC: Look up EC in DSDT [ 0.219087] ACPI: Executed 1 blocks of module-level executable AML code [ 0.240469] ACPI: SSDT 79e29018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123) [ 0.241138] ACPI: Dynamic OEM Table Load: [ 0.241141] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123) [ 0.268202] ACPI: SSDT 79e6ba98 00303 (v01 PmRef ApIst 00003000 INTL 20111123) [ 0.268912] ACPI: Dynamic OEM Table Load: [ 0.268915] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20111123) [ 0.303991] ACPI: SSDT 79e28d98 00119 (v01 PmRef ApCst 00003000 INTL 20111123) [ 0.304648] ACPI: Dynamic OEM Table Load: [ 0.304651] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20111123) [ 0.566801] Freeing initrd memory: 15124k freed [ 0.571639] ACPI: Interpreter enabled [ 0.571655] ACPI: (supports S0 S3 S4 S5) [ 0.571688] ACPI: Using IOAPIC for interrupt routing [ 0.609930] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.610432] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.610440] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.610887] \_SB_.PCI0:_OSC invalid UUID [ 0.610889] _OSC request data:1 8 1f [ 0.610894] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.611580] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.611583] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.611586] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.611589] pci_root PNP0A08:00: host bridge window [mem 0x7ea00000-0xfeafffff] [ 0.611625] PCI host bridge to bus 0000:00 [ 0.611628] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.611631] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.611633] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.611636] pci_bus 0000:00: root bus resource [mem 0x7ea00000-0xfeafffff] [ 0.611647] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.611697] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000 [ 0.611712] pci 0000:00:02.0: reg 10: [mem 0x92000000-0x923fffff 64bit] [ 0.611720] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.611727] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f] [ 0.611820] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.611858] pci 0000:00:16.0: reg 10: [mem 0x92604000-0x9260400f 64bit] [ 0.611982] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.612040] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.612074] pci 0000:00:1a.0: reg 10: [mem 0x92609000-0x926093ff] [ 0.612218] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.612261] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.612287] pci 0000:00:1b.0: reg 10: [mem 0x92600000-0x92603fff 64bit] [ 0.612414] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.612454] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.612586] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.612629] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.612765] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.612808] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.612941] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.612992] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.613025] pci 0000:00:1d.0: reg 10: [mem 0x92608000-0x926083ff] [ 0.613172] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.613212] pci 0000:00:1f.0: [8086:1e5e] type 00 class 0x060100 [ 0.613406] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.613437] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f] [ 0.613452] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097] [ 0.613468] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087] [ 0.613483] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093] [ 0.613497] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f] [ 0.613512] pci 0000:00:1f.2: reg 24: [mem 0x92607000-0x926077ff] [ 0.613600] pci 0000:00:1f.2: PME# supported from D3hot [ 0.613632] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.613659] pci 0000:00:1f.3: reg 10: [mem 0x92605000-0x926050ff 64bit] [ 0.613701] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f] [ 0.613907] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.613983] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff] [ 0.614115] pci 0000:01:00.0: reg 18: [mem 0x92404000-0x92404fff 64bit pref] [ 0.614197] pci 0000:01:00.0: reg 20: [mem 0x92400000-0x92403fff 64bit pref] [ 0.614555] pci 0000:01:00.0: supports D1 D2 [ 0.614557] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.619813] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.619824] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.619845] pci 0000:00:1c.0: bridge window [mem 0x92400000-0x924fffff 64bit pref] [ 0.619984] pci 0000:02:00.0: [1814:539b] type 00 class 0x028000 [ 0.620027] pci 0000:02:00.0: reg 10: [mem 0x92500000-0x9250ffff] [ 0.627781] pci 0000:00:1c.2: PCI bridge to [bus 02-02] [ 0.627797] pci 0000:00:1c.2: bridge window [mem 0x92500000-0x925fffff] [ 0.628002] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000 [ 0.628067] pci 0000:03:00.0: reg 10: [mem 0x91000000-0x91000fff] [ 0.628562] pci 0000:03:00.0: supports D1 D2 [ 0.628565] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.635802] pci 0000:00:1c.3: PCI bridge to [bus 03-08] [ 0.635812] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.635822] pci 0000:00:1c.3: bridge window [mem 0x91000000-0x91ffffff] [ 0.635838] pci 0000:00:1c.3: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 0.635880] pci_bus 0000:00: on NUMA node 0 [ 0.635883] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.636132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.636189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.636238] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.636374] \_SB_.PCI0:_OSC invalid UUID [ 0.636376] _OSC request data:1 1f 1f [ 0.636381] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.636437] \_SB_.PCI0:_OSC invalid UUID [ 0.636439] _OSC request data:1 0 1d [ 0.636443] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.636445] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.640510] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.640574] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.640633] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.640689] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.640746] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.640803] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.640859] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.640915] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.641023] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.641031] vgaarb: loaded [ 0.641033] vgaarb: bridge control possible 0000:00:02.0 [ 0.641240] SCSI subsystem initialized [ 0.641289] libata version 3.00 loaded. [ 0.641313] ACPI: bus type usb registered [ 0.641337] usbcore: registered new interface driver usbfs [ 0.641348] usbcore: registered new interface driver hub [ 0.641375] usbcore: registered new device driver usb [ 0.641468] PCI: Using ACPI for IRQ routing [ 0.649915] PCI: pci_cache_line_size set to 64 bytes [ 0.650072] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.650075] e820: reserve RAM buffer [mem 0x793bf000-0x7bffffff] [ 0.650078] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] [ 0.650080] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff] [ 0.650189] NetLabel: Initializing [ 0.650191] NetLabel: domain hash size = 128 [ 0.650192] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.650203] NetLabel: unlabeled traffic allowed by default [ 0.650309] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.650317] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.653338] Switching to clocksource hpet [ 0.661457] AppArmor: AppArmor Filesystem Enabled [ 0.661483] pnp: PnP ACPI init [ 0.661503] ACPI: bus type pnp registered [ 0.661911] pnp 00:00: [bus 00-fe] [ 0.661915] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.661917] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.661920] pnp 00:00: [io 0x0d00-0xffff window] [ 0.661923] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.661925] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.661928] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.661930] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.661933] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.661935] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.661937] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.661940] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.661942] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.661945] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.661947] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.661950] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.661952] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.661954] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.661957] pnp 00:00: [mem 0x7ea00000-0xfeafffff window] [ 0.661959] pnp 00:00: [mem 0x00010000-0x0001ffff window] [ 0.662029] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.662045] pnp 00:01: [io 0x0000-0x001f] [ 0.662047] pnp 00:01: [io 0x0081-0x0091] [ 0.662049] pnp 00:01: [io 0x0093-0x009f] [ 0.662052] pnp 00:01: [io 0x00c0-0x00df] [ 0.662054] pnp 00:01: [dma 4] [ 0.662080] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.662090] pnp 00:02: [mem 0xff000000-0xffffffff] [ 0.662113] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.662199] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.662224] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.662235] pnp 00:04: [io 0x00f0] [ 0.662247] pnp 00:04: [irq 13] [ 0.662273] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.662286] pnp 00:05: [io 0x002e-0x002f] [ 0.662288] pnp 00:05: [io 0x004e-0x004f] [ 0.662291] pnp 00:05: [io 0x0061] [ 0.662293] pnp 00:05: [io 0x0063] [ 0.662295] pnp 00:05: [io 0x0065] [ 0.662297] pnp 00:05: [io 0x0067] [ 0.662299] pnp 00:05: [io 0x0070] [ 0.662301] pnp 00:05: [io 0x0080] [ 0.662303] pnp 00:05: [io 0x0092] [ 0.662305] pnp 00:05: [io 0x00b2-0x00b3] [ 0.662308] pnp 00:05: [io 0x0680-0x069f] [ 0.662310] pnp 00:05: [io 0x1000-0x100f] [ 0.662312] pnp 00:05: [io 0xffff] [ 0.662314] pnp 00:05: [io 0xffff] [ 0.662317] pnp 00:05: [io 0x0400-0x0453] [ 0.662319] pnp 00:05: [io 0x0458-0x047f] [ 0.662321] pnp 00:05: [io 0x0500-0x057f] [ 0.662323] pnp 00:05: [io 0x164e-0x164f] [ 0.662372] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.662375] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.662378] system 00:05: [io 0xffff] has been reserved [ 0.662381] system 00:05: [io 0xffff] has been reserved [ 0.662383] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.662386] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.662389] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.662391] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.662395] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.662404] pnp 00:06: [io 0x0070-0x0077] [ 0.662410] pnp 00:06: [irq 8] [ 0.662436] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.662467] pnp 00:07: [io 0x0454-0x0457] [ 0.662505] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.662509] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.679518] pnp 00:08: [io 0x0060] [ 0.679521] pnp 00:08: [io 0x0064] [ 0.679528] pnp 00:08: [irq 1] [ 0.679563] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.679576] pnp 00:09: [irq 12] [ 0.679606] pnp 00:09: Plug and Play ACPI device, IDs SYN1e68 SYN1e00 SYN0002 PNP0f13 (active) [ 0.679732] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] [ 0.679735] pnp 00:0a: [mem 0xfed10000-0xfed17fff] [ 0.679737] pnp 00:0a: [mem 0xfed18000-0xfed18fff] [ 0.679740] pnp 00:0a: [mem 0xfed19000-0xfed19fff] [ 0.679742] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.679744] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] [ 0.679746] pnp 00:0a: [mem 0xfed90000-0xfed93fff] [ 0.679749] pnp 00:0a: [mem 0xff000000-0xffffffff] [ 0.679751] pnp 00:0a: [mem 0xfee00000-0xfeefffff] [ 0.679753] pnp 00:0a: [mem 0x7ea00000-0x7ea00fff] [ 0.679804] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.679807] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.679810] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.679813] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.679816] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.679818] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.679821] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.679824] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved [ 0.679827] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.679830] system 00:0a: [mem 0x7ea00000-0x7ea00fff] has been reserved [ 0.679833] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.680151] pnp 00:0b: [mem 0x20000000-0x201fffff] [ 0.680154] pnp 00:0b: [mem 0x40000000-0x401fffff] [ 0.680219] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved [ 0.680222] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved [ 0.680225] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.680297] pnp: PnP ACPI: found 12 devices [ 0.680298] ACPI: ACPI bus type pnp unregistered [ 0.680302] PnPBIOS: Disabled by ACPI PNP [ 0.716906] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.716912] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.716925] pci 0000:00:1c.0: bridge window [mem 0x92400000-0x924fffff 64bit pref] [ 0.716935] pci 0000:00:1c.2: PCI bridge to [bus 02-02] [ 0.716943] pci 0000:00:1c.2: bridge window [mem 0x92500000-0x925fffff] [ 0.716957] pci 0000:00:1c.3: PCI bridge to [bus 03-08] [ 0.716961] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.716969] pci 0000:00:1c.3: bridge window [mem 0x91000000-0x91ffffff] [ 0.716975] pci 0000:00:1c.3: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 0.717022] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.717024] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.717027] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.717029] pci_bus 0000:00: resource 7 [mem 0x7ea00000-0xfeafffff] [ 0.717032] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.717035] pci_bus 0000:01: resource 2 [mem 0x92400000-0x924fffff 64bit pref] [ 0.717037] pci_bus 0000:02: resource 1 [mem 0x92500000-0x925fffff] [ 0.717040] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.717042] pci_bus 0000:03: resource 1 [mem 0x91000000-0x91ffffff] [ 0.717045] pci_bus 0000:03: resource 2 [mem 0x90000000-0x90ffffff 64bit pref] [ 0.717076] NET: Registered protocol family 2 [ 0.717136] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.717253] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.717547] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.717672] TCP: Hash tables configured (established 131072 bind 65536) [ 0.717674] TCP: reno registered [ 0.717677] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.717683] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.717753] NET: Registered protocol family 1 [ 0.717768] pci 0000:00:02.0: Boot video device [ 0.749396] PCI: CLS 64 bytes, default 64 [ 0.749481] Simple Boot Flag at 0x44 set to 0x1 [ 0.749899] audit: initializing netlink socket (disabled) [ 0.749909] type=2000 audit(1366420044.620:1): initialized [ 0.778212] highmem bounce pool size: 64 pages [ 0.778224] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.780176] VFS: Disk quotas dquot_6.5.2 [ 0.780230] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.780786] fuse init (API version 7.19) [ 0.780878] msgmni has been set to 1674 [ 0.781252] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.781299] io scheduler noop registered [ 0.781301] io scheduler deadline registered (default) [ 0.781309] io scheduler cfq registered [ 0.781637] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.781654] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.781711] intel_idle: MWAIT substates: 0x120 [ 0.781712] intel_idle: v0.4 model 0x2A [ 0.781714] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.786714] ACPI: AC Adapter [AC] (on-line) [ 0.786847] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.788930] ACPI: Lid Switch [LID] [ 0.788975] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.788979] ACPI: Power Button [PWRB] [ 0.789019] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.789022] ACPI: Power Button [PWRF] [ 0.789108] ACPI: Requesting acpi_cpufreq [ 0.825577] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.825580] ACPI: Thermal Zone [TSZ0] (37 C) [ 0.825600] ACPI: Battery Slot [BAT0] (battery present) [ 0.825685] GHES: HEST is not enabled! [ 0.825731] isapnp: Scanning for PnP cards... [ 0.825760] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.826960] Linux agpgart interface v0.103 [ 0.828383] brd: module loaded [ 0.829078] loop: module loaded [ 0.829488] Fixed MDIO Bus: probed [ 0.829535] tun: Universal TUN/TAP device driver, 1.6 [ 0.829536] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.829575] PPP generic driver version 2.4.2 [ 0.829613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.829652] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.829657] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.829663] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.829693] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.833580] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 0.833600] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x92609000 [ 0.845272] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.845301] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.845303] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.845306] usb usb1: Product: EHCI Host Controller [ 0.845308] usb usb1: Manufacturer: Linux 3.5.0-27-generic ehci_hcd [ 0.845310] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.845427] hub 1-0:1.0: USB hub found [ 0.845432] hub 1-0:1.0: 2 ports detected [ 0.845509] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.845513] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.845518] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.845544] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.849444] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 0.849487] ehci_hcd 0000:00:1d.0: irq 23, io mem 0x92608000 [ 0.861288] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.861311] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.861314] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.861316] usb usb2: Product: EHCI Host Controller [ 0.861318] usb usb2: Manufacturer: Linux 3.5.0-27-generic ehci_hcd [ 0.861321] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.861546] hub 2-0:1.0: USB hub found [ 0.861551] hub 2-0:1.0: 2 ports detected [ 0.861652] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.861670] uhci_hcd: USB Universal Host Controller Interface driver [ 0.861794] ACPI: Battery Slot [BAT0] (battery present) [ 0.861834] usbcore: registered new interface driver libusual [ 0.861884] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.870879] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.870884] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.870987] mousedev: PS/2 mouse device common for all mice [ 0.872580] rtc_cmos 00:06: RTC can wake from S4 [ 0.872707] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.872735] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.872786] device-mapper: uevent: version 1.0.3 [ 0.872846] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.872874] EISA: Probing bus 0 at eisa.0 [ 0.872877] EISA: Cannot allocate resource for mainboard [ 0.872878] Cannot allocate resource for EISA slot 1 [ 0.872880] Cannot allocate resource for EISA slot 2 [ 0.872882] Cannot allocate resource for EISA slot 3 [ 0.872883] Cannot allocate resource for EISA slot 4 [ 0.872885] Cannot allocate resource for EISA slot 5 [ 0.872886] Cannot allocate resource for EISA slot 6 [ 0.872888] Cannot allocate resource for EISA slot 7 [ 0.872889] Cannot allocate resource for EISA slot 8 [ 0.872891] EISA: Detected 0 cards. [ 0.872939] cpuidle: using governor ladder [ 0.872981] cpuidle: using governor menu [ 0.872983] EFI Variables Facility v0.08 2004-May-17 [ 0.873367] ashmem: initialized [ 0.873498] TCP: cubic registered [ 0.873609] NET: Registered protocol family 10 [ 0.873819] NET: Registered protocol family 17 [ 0.873837] Key type dns_resolver registered [ 0.873908] Using IPI No-Shortcut mode [ 0.873990] PM: Hibernation image not present or could not be loaded. [ 0.874001] registered taskstats version 1 [ 0.876284] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.881794] Key type trusted registered [ 0.883705] Key type encrypted registered [ 0.886145] Magic number: 9:656:104 [ 0.886222] rtc_cmos 00:06: setting system clock to 2013-04-20 01:07:25 UTC (1366420045) [ 0.886708] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.886710] EDD information not available. [ 1.157175] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.179474] isapnp: No Plug & Play device found [ 1.179591] Freeing unused kernel memory: 760k freed [ 1.179788] Write protecting the kernel text: 6052k [ 1.179825] Write protecting the kernel read-only data: 2476k [ 1.179826] NX-protecting the kernel data: 4188k [ 1.197703] udevd[89]: starting version 175 [ 1.243094] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.243232] r8169 0000:01:00.0: irq 40 for MSI/MSI-X [ 1.243434] r8169 0000:01:00.0: eth0: RTL8105e at 0xf8420000, 6c:3b:e5:f4:44:de, XID 00c00000 IRQ 40 [ 1.248001] rtsx_pci 0000:03:00.0: irq 41 for MSI/MSI-X [ 1.248038] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41 [ 1.250636] ahci 0000:00:1f.2: version 3.0 [ 1.250716] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 1.250754] ahci: SSS flag set, parallel bus scan disabled [ 1.265162] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x5 impl SATA mode [ 1.265168] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 1.265176] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.275808] scsi0 : ahci [ 1.277250] scsi1 : ahci [ 1.281186] scsi2 : ahci [ 1.283375] scsi3 : ahci [ 1.283489] ata1: SATA max UDMA/133 abar m2048@0x92607000 port 0x92607100 irq 42 [ 1.283491] ata2: DUMMY [ 1.283495] ata3: SATA max UDMA/133 abar m2048@0x92607000 port 0x92607200 irq 42 [ 1.283497] ata4: DUMMY [ 1.289497] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.289502] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.289781] hub 1-1:1.0: USB hub found [ 1.289868] hub 1-1:1.0: 4 ports detected [ 1.401129] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.533455] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.533465] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.533864] hub 2-1:1.0: USB hub found [ 1.533912] hub 2-1:1.0: 4 ports detected [ 1.601067] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.602345] ata1.00: ATA-8: Hitachi HTS543232A7A384, ES2OA60W, max UDMA/100 [ 1.602354] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.603691] ata1.00: configured for UDMA/100 [ 1.603949] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 ES2O PQ: 0 ANSI: 5 [ 1.604109] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.604118] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.604173] sd 0:0:0:0: [sda] Write Protect is off [ 1.604176] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.604198] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.605171] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd [ 1.663676] sda: sda1 sda2 < sda5 > [ 1.664143] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.700652] usb 1-1.2: New USB device found, idVendor=0461, idProduct=4d17 [ 1.700660] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.700665] usb 1-1.2: Product: USB Optical Mouse [ 1.749008] Refined TSC clocksource calibration: 1795.920 MHz. [ 1.749019] Switching to clocksource tsc [ 1.805121] usb 2-1.3: new high-speed USB device number 3 using ehci_hcd [ 1.920953] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.924064] ata3.00: ATAPI: hp DVD A DS8A8SH, KH63, max UDMA/100 [ 1.924798] ata3.00: configured for UDMA/100 [ 1.931585] scsi 2:0:0:0: CD-ROM hp DVD A DS8A8SH KH63 PQ: 0 ANSI: 5 [ 1.945667] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.945673] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.945841] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.945918] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.949516] usbcore: registered new interface driver usbhid [ 1.949520] usbhid: USB HID core driver [ 1.952238] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 [ 1.952439] hid-generic 0003:0461:4D17.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 1.968457] usb 2-1.3: New USB device found, idVendor=04f2, idProduct=b34f [ 1.968467] usb 2-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.968474] usb 2-1.3: Product: HP Truevision HD [ 1.968479] usb 2-1.3: Manufacturer: Chicony Electronics Co.,Ltd. [ 1.968484] usb 2-1.3: SerialNumber: 0x0001 [ 2.387878] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.974757] Adding 1986556k swap on /dev/sda5. Priority:-1 extents:1 across:1986556k [ 12.980258] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.007554] udevd[337]: starting version 175 [ 13.060312] lp: driver loaded but no devices found [ 13.105053] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 13.105061] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.105064] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 13.105068] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 13.105072] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.105077] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251) [ 13.105081] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.105083] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 13.105952] mei 0000:00:16.0: setting latency timer to 64 [ 13.106034] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 13.111976] mei 0000:00:16.0: wd: failed to find the client [ 13.114343] [drm] Initialized drm 1.1.0 20060810 [ 13.163116] cfg80211: Calling CRDA to update world regulatory domain [ 13.164595] type=1400 audit(1366409257.777:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=468 comm="apparmor_parser" [ 13.165175] type=1400 audit(1366409257.777:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=468 comm="apparmor_parser" [ 13.165476] type=1400 audit(1366409257.781:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=468 comm="apparmor_parser" [ 13.177911] wmi: Mapper loaded [ 13.185600] i915 0000:00:02.0: setting latency timer to 64 [ 13.185920] pci 0000:00:00.0: Intel Sandybridge Chipset [ 13.185967] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 13.186522] pci 0000:00:00.0: detected 65536K stolen memory [ 13.187678] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 13.187689] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 13.187690] [drm] Driver supports precise vblank timestamp query. [ 13.187793] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 13.211925] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 13.211930] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 13.211932] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 13.211934] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 13.211936] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 13.211938] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 13.211940] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 13.211942] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 13.211944] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 13.211946] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 13.211948] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 13.211950] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 13.211951] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 13.211953] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 13.211955] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 13.211957] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 13.211959] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 13.211961] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 13.211963] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 13.211964] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 13.211966] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 13.211968] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 13.211970] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 13.211972] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 13.211974] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 13.211976] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 13.211977] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 13.211979] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 13.245191] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 13.274237] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 13.274683] Registered led device: rt2800pci-phy0::radio [ 13.274908] Registered led device: rt2800pci-phy0::assoc [ 13.275181] Registered led device: rt2800pci-phy0::quality [ 13.309928] Linux video capture interface: v2.00 [ 13.311684] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 [ 13.311905] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b34f) [ 13.336020] input: HP Truevision HD as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5 [ 13.336190] usbcore: registered new interface driver uvcvideo [ 13.336192] USB Video Class driver (1.1.1) [ 13.466003] input: HP WMI hotkeys as /devices/virtual/input/input6 [ 13.497415] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 13.497420] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497423] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 13.497425] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497427] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 13.497429] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497431] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 13.497433] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497435] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 13.497437] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497438] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 13.497440] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497442] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 13.497444] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497446] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 13.497448] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497449] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 13.497451] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497453] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 13.497455] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497457] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 13.497459] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497461] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 13.497463] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.497464] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 13.497466] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.497468] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 13.497470] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.497473] cfg80211: World regulatory domain updated: [ 13.497475] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.497477] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497479] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.497481] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.497483] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497484] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.497844] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236) [ 13.497852] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f3c33318), AE_AML_BUFFER_LIMIT (20120320/psparse-536) [ 13.497865] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f3c33840), AE_AML_BUFFER_LIMIT (20120320/psparse-536) [ 13.540264] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 [ 13.542801] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 13.547961] kvm: disabled by bios [ 13.550152] kvm: disabled by bios [ 13.622078] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236) [ 13.622088] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f3c33318), AE_AML_BUFFER_LIMIT (20120320/psparse-536) [ 13.622100] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f3c33840), AE_AML_BUFFER_LIMIT (20120320/psparse-536) [ 13.643133] init: failsafe main process (748) killed by TERM signal [ 13.763103] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 13.768058] Bluetooth: Core ver 2.16 [ 13.768111] NET: Registered protocol family 31 [ 13.768114] Bluetooth: HCI device and connection manager initialized [ 13.768636] Bluetooth: HCI socket layer initialized [ 13.768639] Bluetooth: L2CAP socket layer initialized [ 13.768645] Bluetooth: SCO socket layer initialized [ 13.781170] Bluetooth: RFCOMM TTY layer initialized [ 13.781176] Bluetooth: RFCOMM socket layer initialized [ 13.781178] Bluetooth: RFCOMM ver 1.11 [ 13.783032] ppdev: user-space parallel port driver [ 13.798449] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.798454] Bluetooth: BNEP filters: protocol multicast [ 13.803660] type=1400 audit(1366409258.417:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=826 comm="apparmor_parser" [ 13.805887] type=1400 audit(1366409258.421:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=826 comm="apparmor_parser" [ 13.829307] type=1400 audit(1366409258.445:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=853 comm="apparmor_parser" [ 13.831410] type=1400 audit(1366409258.445:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=852 comm="apparmor_parser" [ 13.832414] type=1400 audit(1366409258.445:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=853 comm="apparmor_parser" [ 13.832702] type=1400 audit(1366409258.445:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=853 comm="apparmor_parser" [ 13.848282] type=1400 audit(1366409258.461:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=857 comm="apparmor_parser" [ 13.896756] fbcon: inteldrmfb (fb0) is primary device [ 13.897617] Console: switching to colour frame buffer device 170x48 [ 13.897658] fb0: inteldrmfb frame buffer device [ 13.897660] drm: registered panic notifier [ 13.906446] ACPI Warning: _BQC returned an invalid level (20120320/video-494) [ 13.906552] acpi device:3f: registered as cooling_device2 [ 13.906738] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.907283] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 13.908149] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 13.908959] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 14.100478] init: alsa-restore main process (926) terminated with status 19 [ 14.195948] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400 [ 14.235999] r8169 0000:01:00.0: eth0: link down [ 14.236019] r8169 0000:01:00.0: eth0: link down [ 14.236209] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.238772] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.240568] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 14.298346] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.298898] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.463138] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.463223] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.463288] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 14.729130] init: plymouth-upstart-bridge main process (784) killed by TERM signal [ 14.784382] init: plymouth-stop pre-start process (1146) terminated with status 1 [ 15.864299] r8169 0000:01:00.0: eth0: link up [ 15.864433] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 39.551068] audit_printk_skb: 36 callbacks suppressed [ 39.551072] type=1400 audit(1366409284.173:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1831 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 65.750224] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 318.875906] type=1400 audit(1366409563.589:25): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=828 comm="cupsd" pid=828 comm="cupsd" capability=36 capname="block_suspend"

από **eliasps** » 30 Απρ 2013, 18:57

Δεν βλέπω κάτι σχετικό στο dmesg που να υποδεικνύει το πρόβλημα. Εκτέλεσες την εντολή όταν εμφανίστηκε το παράθυρο με το μήνυμα σφάλματος, σωστά;

Πιθανότατα να επηρεάζεσαι και εσύ από κάποιο bug που αφορά τον πυρήνα (kernel) σε συνδιασμό με κάρτες γραφικών Intel.
Υπάρχουν διάφορες αναφορές bug για αυτό το πρόβλημα (ή παρόμοια) στο Launchpad, ωστόσο μία από αυτές που ξεχωρίζουν είναι η παρακάτω:

Launchpad bug: #1140716

Αυτό το πρόβλημα εμφανίστηκε ξαφνικά ή υπάρχει καιρό;
Αν εμφανίστηκε ξαφνικά, τότε δοκίμασε να κάνεις εκκίνηση από πυρήνα παλαιότερης έκδοσης (κρατάς το Shift πατημένο κατά την εκκίνηση για να εμφανιστεί το menu του grub, επιλέγεις Advanced options for Ubuntu και στην συνέχεια έκδοση kernel) για να δεις αν συμβαίνει το ίδιο.
Αν εκτός από το μήνυμα του παραθύρου, δεν βλέπεις να υπάρχει κάποιο ουσιαστικό πρόβλημα που επηρεάζει την ομαλή λειτουργία του συστήματος, τότε μπορείς να απενεργοποιήσεις προσωρινά το Apport (όπως περιγράφεται εδώ) για να μην εμφανίζονται αυτά τα παράθυρα.

Για περισσότερες πληροφορίες ενημέρωσε την υπογραφή σου, ώστε να γνωρίζουμε λεπτομέρειες για τον υπολογιστή σου και το Ubuntu που χρησιμοποιείς (όπως πυρήνας, έκδοση, κάρτα γραφικών...).

Καλώς όρισες στο Forum!

από **loukianos** » 30 Απρ 2013, 20:03

Συγγνώμη για την υπογραφή. Την είχα φτιάξει για να περιέχει και τους δυο υπολογιστές, αλλά έβλεπες μόνο τον παλιό. Το laptop το 'χω κανα μήνα και από την αρχή είχε αυτό το πρόβλημα. Δεν καταλαβαίνω αυτό που γράφεις: "Εκτέλεσες την εντολή όταν εμφανίστηκε το παράθυρο με το μήνυμα σφάλματος, σωστά;"
Όταν έφτιαχνα πριν την υπογραφή μου άνοιξε ένα παράθυρο που μου έλεγε πως έχω 2Kernel. Όπως θα παρατηρήσεις από την υπογραφή, έχω: α) Ubuntu 12.04 precise 3.5.0-27-generic 32bit και β) Ubuntu 3.5.0-23-generic.
Φαντάζομαι πως θα πρέπει να απεγκαταστήσω έναν από τους δυο αλλά δεν ξέρω ποιον;

από **eliasps** » 30 Απρ 2013, 20:48

loukianos έγραψε:Δεν καταλαβαίνω αυτό που γράφεις: "Εκτέλεσες την εντολή όταν εμφανίστηκε το παράθυρο με το μήνυμα σφάλματος, σωστά;"

H εντολή dmesg > dmesg.txt της οποίας τα αποτελέσματα παρέθεσες στην προηγούμενη απάντηση, μας δείχνει μηνύματα του kernel του Ubuntu από την στιγμή της εκκίνησης μέχρι την στιγμή που την εκτελέσαμε.
Αν το πρόβλημα δεν έχει εμφανιστεί (αυτό GPU lockup IPEHR:0x23002000 IPEHR:0x0b140001), τότε δεν θα υπάρχει κάποιο μήνυμα του πυρήνα σχετικά με αυτό.
Αν όμως έχει εμφανιστεί, τότε μέσα στα μηνύματα αυτά, ίσως υπάρχει και ένα που να αφορά το πρόβλημα.
Συνεπώς, η παραπάνω εντολή θα πρέπει να εκτελεστεί αφού έχει εμφανιστεί το παράθυρο:

έγραψε:“Apport has detected a possible GPU hang. Did your system recently lock up and/or require a hard reboot?”

loukianos έγραψε:Όταν έφτιαχνα πριν την υπογραφή μου άνοιξε ένα παράθυρο που μου έλεγε πως έχω 2Kernel. Όπως θα παρατηρήσεις από την υπογραφή, έχω: α) Ubuntu 12.04 precise 3.5.0-27-generic 32bit και β) Ubuntu 3.5.0-23-generic.
Φαντάζομαι πως θα πρέπει να απεγκαταστήσω έναν από τους δυο αλλά δεν ξέρω ποιον;

Όχι, δεν χρειάζεται να απεγκαταστήσεις κάποιον kernel.
Αν τη στιγμή που ανοίγεις τον υπολογιστή κρατήσεις το πλήκτρο Shift πατημένο, θα δεις το μενού του grub (bootloader). Σε αυτό το μενού υπάρχει μία επιλογή που λέει «Advanced Options for Ubuntu» και αν το πατήσεις, θα δεις μία λίστα με τους διαθέσιμους πηρύνες. Επιλέγοντας κάποιον από αυτούς, o υπολογιστής θα κάνει boot χρησιμοποιώντας αυτόν που επέλεξες.

Όπως είπα παραπάνω, το πιο πιθανό είναι ότι το πρόβλημα αυτό οφείλεται σε κάποιο bug.
Αν το σύστημά σου δεν αντιμετωπίζει κάποιο ουσιαστικό πρόβλημα (δηλαδή κακές επιδόσεις, freezes, hangs κλπ) και το μόνο που βλέπεις είναι αυτά τα ενοχλητικά παράθυρα με το μήνυμα σφάλματος, τότε μπορείς να απενεργοποιήσεις το πρόγραμμα που είναι υπεύθυνο για την εμφάνιση αυτών των παραθύρων.
Ο τρόπος για να το κάνεις, φαίνεται εδώ.

από **buenaventura** » 07 Ιουν 2013, 02:43

Nα μαι και πάλι εδώ με ubuntu 13.4 μετά από αναβάθμιση. Πάλι έχω πρόβλημα με το αναθεματισμένο το λάπτοπ. Το άτιμο τρώει κάτι κολλήματα κάποιες φορές και κολλάει. Και αναγκάζομαι να το κλείσω.
Εγκατέστησα το Psensor και η θερμοκρασία του κυμαίνεται σε θερμοκρασίες εώς και 57 βαθμούς, αν και συνήθως παίζει κάπου στους 50 με 52, και πολύ σπάνια ξεπερνάει τους 60-65. Αυτά τα boot και τα var/log κτλ δε τα πολύ καταλαβαίνω. Και σε καμία περίπτωση δε θέλω αν απεγκαταστήσω ξανά το ubuntu δεν μπορώ πάλι να τα ξαναρυθμίζω όπως είναι, τ κατεβάζω ενημερώσεις και προγράμματα... Ρε γ***** δε θέλω να φτάσω στο σημείο να αφαιρέσω να ubuntu και να βάλω windows ώστε να δουλέψει καλά το λαπτοπ μου...

από **eliasps** » 07 Ιουν 2013, 04:29

Eκτέλεσε:

Κώδικας: Επιλογή όλων: sudo apt-get install xserver-xorg-video-intel

Kαι δώσε το αποτέλεσμα.

Eπίσης δώσε και τα αποτελέσματα των:

Κώδικας: Επιλογή όλων: cat /var/log/Xorg.0.log

Kαι:

Κώδικας: Επιλογή όλων: cat /sys/kernel/debug/dri/0/i915_error_state

Aκόμα, το 'χα αναφέρει και παλαιότερα, όταν κολλήσει ξανά ο υπολογιστής, πάτα ctrl + alt + F1 (εως F6, το ίδιο είναι) και δες αν έχεις πρόσβαση την κονσόλα.
Αν ναι, κάνεις login πληκτρολογώντας το username και τον κωδικό σου. Αφού το κάνεις, εκτελείς:

Κώδικας: Επιλογή όλων: dmesg > dmesg.txt sudo reboot

O υπολογιστής θα κάνει επανεκκίνηση. Όταν ανοίξει, στον προσωπικό σου φάκελο θα υπάρχει ένα αρχείο με όνομα dmesg.txt.
Κάνε αντιγραφή το περιεχόμενό του και επικόλληση εδώ.

Το πρόβλημα που αντιμετωπίζεις, κατά πάσα πιθανότητα οφείλεται σε bug και πρέπει να ταυτοποιηθεί, ενώ αν δεν υπάρχει θα πρέπει να αναφερθεί.
Δες αυτό για παράδειγμα, αφορά την ίδια κάρτα γραφικών και επηρεάζει 16 χρήστες.
Περισσότερες πληροφορίες μπορείς να διαβάσεις εδώ, για τέτοιου είδους προβλήματα.

από **buenaventura** » 07 Ιουν 2013, 04:49

Oκ αν ξανακολλήσει θα πατήσω ctrl+alt+F1 κτλ. Λοιπόν τώρα έχω αυτά να μοιραστώ:
sudo apt-get install xserver-xorg-video-intel

Κώδικας: Επιλογή όλων: Ανάγνωση Λιστών Πακέτων... Ολοκληρώθηκε Κατασκευή Δένδρου Εξαρτήσεων Ανάγνωση περιγραφής της τρέχουσας κατάσταση... Ολοκληρώθηκε το xserver-xorg-video-intel είναι ήδη η τελευταία έκδοση. Τα ακόλουθα πακέτα εγκαταστάθηκαν αυτόματα και δεν χρειάζονται πλέον: calligra-l10n-el calligra-l10n-engb cdparanoia gstreamer1.0-nice k3b k3b-data k3b-i18n kde-l10n-el kde-l10n-engb kde-l10n-zhcn kdevelop-l10n kdevelop-php-docs-l10n kdevelop-php-l10n language-pack-kde-el language-pack-kde-en libaccounts-qt5-1 libao-common libao4 libblas3gf libclucene0ldbl libdee-qt5-3 libfarstream-0.2-2 libflac++6 libindicate-gtk3 libirrlicht1.7a libk3b6 libkcddb4 libnepomuksync4 libotr2 libqapt-runtime libqapt1 libqt5graphicaleffects5 libqt5network5 libqt5qml5 libqt5quick5 libqt5svg5 libqt5v8-5 libqt5xml5 libsignon-qt5-1 libtelepathy-farstream3 libtorrent-rasterbar6 libwebp2 qtdeclarative5-accounts-plugin qtdeclarative5-friends-plugin qtdeclarative5-qtquick2-plugin qtdeclarative5-ubuntu-ui-toolkit-plugin thunderbird-locale-el thunderbird-locale-en thunderbird-locale-en-gb thunderbird-locale-en-us thunderbird-locale-zh-cn thunderbird-locale-zh-hans ubuntu-ui-toolkit-theme Χρησιμοποιήστε 'apt-get autoremove' για να τα διαγράψετε. 0 αναβαθμίστηκαν, 0 νέο εγκατεστημένα, 0 θα αφαιρεθούν και 0 δεν αναβαθμίζονται.

cat /var/log/Xorg.0.log

Κώδικας: Επιλογή όλων: [ 19.684] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 19.684] Entry deleted from font path. [ 19.684] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 19.684] Entry deleted from font path. [ 19.684] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 19.684] Entry deleted from font path. [ 19.684] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 19.684] Entry deleted from font path. [ 19.684] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 19.684] Entry deleted from font path. [ 19.684] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 19.684] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 19.684] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 19.684] (II) Loader magic: 0xb77846a0 [ 19.684] (II) Module ABI versions: [ 19.684] X.Org ANSI C Emulation: 0.4 [ 19.684] X.Org Video Driver: 13.1 [ 19.684] X.Org XInput driver : 18.0 [ 19.685] X.Org Server Extension : 7.0 [ 19.685] (II) config/udev: Adding drm device (/dev/dri/card0) [ 19.686] (--) PCI:*(0:0:2:0) 8086:0116:10cf:16c2 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64 [ 19.686] (II) Open ACPI successful (/var/run/acpid.socket) [ 19.686] Initializing built-in extension Generic Event Extension [ 19.686] Initializing built-in extension SHAPE [ 19.686] Initializing built-in extension MIT-SHM [ 19.686] Initializing built-in extension XInputExtension [ 19.686] Initializing built-in extension XTEST [ 19.686] Initializing built-in extension BIG-REQUESTS [ 19.686] Initializing built-in extension SYNC [ 19.686] Initializing built-in extension XKEYBOARD [ 19.686] Initializing built-in extension XC-MISC [ 19.686] Initializing built-in extension SECURITY [ 19.686] Initializing built-in extension XINERAMA [ 19.686] Initializing built-in extension XFIXES [ 19.686] Initializing built-in extension RENDER [ 19.686] Initializing built-in extension RANDR [ 19.686] Initializing built-in extension COMPOSITE [ 19.686] Initializing built-in extension DAMAGE [ 19.686] Initializing built-in extension MIT-SCREEN-SAVER [ 19.686] Initializing built-in extension DOUBLE-BUFFER [ 19.686] Initializing built-in extension RECORD [ 19.686] Initializing built-in extension DPMS [ 19.686] Initializing built-in extension X-Resource [ 19.686] Initializing built-in extension XVideo [ 19.686] Initializing built-in extension XVideo-MotionCompensation [ 19.686] Initializing built-in extension SELinux [ 19.686] Initializing built-in extension XFree86-VidModeExtension [ 19.686] Initializing built-in extension XFree86-DGA [ 19.686] Initializing built-in extension XFree86-DRI [ 19.686] Initializing built-in extension DRI2 [ 19.686] (II) LoadModule: "glx" [ 19.747] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 19.748] (II) Module glx: vendor="X.Org Foundation" [ 19.748] compiled for 1.13.3, module version = 1.0.0 [ 19.748] ABI class: X.Org Server Extension, version 7.0 [ 19.748] (==) AIGLX enabled [ 19.748] Loading extension GLX [ 19.748] (==) Matched intel as autoconfigured driver 0 [ 19.748] (==) Matched intel as autoconfigured driver 1 [ 19.748] (==) Matched vesa as autoconfigured driver 2 [ 19.748] (==) Matched modesetting as autoconfigured driver 3 [ 19.748] (==) Matched fbdev as autoconfigured driver 4 [ 19.748] (==) Assigned the driver to the xf86ConfigLayout [ 19.748] (II) LoadModule: "intel" [ 19.748] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 19.784] (II) Module intel: vendor="X.Org Foundation" [ 19.784] compiled for 1.13.3, module version = 2.21.6 [ 19.784] Module class: X.Org Video Driver [ 19.784] ABI class: X.Org Video Driver, version 13.1 [ 19.784] (II) LoadModule: "vesa" [ 19.785] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 19.785] (II) Module vesa: vendor="X.Org Foundation" [ 19.785] compiled for 1.12.99.902, module version = 2.3.2 [ 19.785] Module class: X.Org Video Driver [ 19.785] ABI class: X.Org Video Driver, version 13.0 [ 19.785] (II) LoadModule: "modesetting" [ 19.785] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 19.785] (II) Module modesetting: vendor="X.Org Foundation" [ 19.785] compiled for 1.13.3, module version = 0.7.0 [ 19.785] Module class: X.Org Video Driver [ 19.785] ABI class: X.Org Video Driver, version 13.1 [ 19.785] (II) LoadModule: "fbdev" [ 19.785] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 19.785] (II) Module fbdev: vendor="X.Org Foundation" [ 19.785] compiled for 1.12.99.902, module version = 0.4.3 [ 19.785] Module class: X.Org Video Driver [ 19.785] ABI class: X.Org Video Driver, version 13.0 [ 19.785] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 19.786] (II) VESA: driver for VESA chipsets: vesa [ 19.786] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 19.786] (II) FBDEV: driver for framebuffer: fbdev [ 19.786] (++) using VT number 7 [ 19.786] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 (Bryce Harrington <bryce@ubuntu.com>) [ 19.786] (WW) Falling back to old probe method for vesa [ 19.786] (WW) Falling back to old probe method for modesetting [ 19.786] (WW) Falling back to old probe method for fbdev [ 19.786] (II) Loading sub module "fbdevhw" [ 19.786] (II) LoadModule: "fbdevhw" [ 19.817] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 19.817] (II) Module fbdevhw: vendor="X.Org Foundation" [ 19.817] compiled for 1.13.3, module version = 0.0.2 [ 19.817] ABI class: X.Org Video Driver, version 13.1 [ 19.818] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 19.818] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 19.818] (==) intel(0): RGB weight 888 [ 19.818] (==) intel(0): Default visual is TrueColor [ 19.818] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2) [ 19.818] (--) intel(0): CPU: sse2, sse3, ssse3, sse4.1, sse4.2, avx [ 19.818] (**) intel(0): Framebuffer tiled [ 19.818] (**) intel(0): Pixmaps tiled [ 19.818] (**) intel(0): "Tear free" disabled [ 19.818] (**) intel(0): Forcing per-crtc-pixmaps? no [ 19.818] (II) intel(0): Output LVDS1 has no monitor section [ 19.819] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware') [ 19.832] (II) intel(0): Output VGA1 has no monitor section [ 19.848] (II) intel(0): Output HDMI1 has no monitor section [ 19.896] (II) intel(0): Output DP1 has no monitor section [ 19.896] (II) intel(0): EDID for output LVDS1 [ 19.896] (II) intel(0): Manufacturer: SEC Model: 3442 Serial#: 0 [ 19.896] (II) intel(0): Year: 2011 Week: 0 [ 19.896] (II) intel(0): EDID Version: 1.3 [ 19.896] (II) intel(0): Digital Display Input [ 19.896] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 19.896] (II) intel(0): Gamma: 2.20 [ 19.896] (II) intel(0): No DPMS capabilities specified [ 19.896] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 19.896] (II) intel(0): First detailed timing is preferred mode [ 19.896] (II) intel(0): redX: 0.570 redY: 0.340 greenX: 0.330 greenY: 0.560 [ 19.896] (II) intel(0): blueX: 0.160 blueY: 0.135 whiteX: 0.313 whiteY: 0.329 [ 19.896] (II) intel(0): Manufacturer's mask: 0 [ 19.896] (II) intel(0): Supported detailed timing: [ 19.896] (II) intel(0): clock: 72.3 MHz Image Size: 344 x 194 mm [ 19.896] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0 [ 19.896] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0 [ 19.896] (II) intel(0): Unknown vendor-specific block f [ 19.896] (II) intel(0): SAMSUNG [ 19.896] (II) intel(0): 156AT20-F01 [ 19.896] (II) intel(0): EDID (in hex): [ 19.896] (II) intel(0): 00ffffffffffff004ca3423400000000 [ 19.896] (II) intel(0): 00150103802213780a09259257548f29 [ 19.896] (II) intel(0): 22505400000001010101010101010101 [ 19.896] (II) intel(0): 010101010101411c56a0500016303020 [ 19.896] (II) intel(0): 250058c2100000190000000f00000000 [ 19.896] (II) intel(0): 00000000001eb4027400000000fe0053 [ 19.896] (II) intel(0): 414d53554e470a2020202020000000fe [ 19.896] (II) intel(0): 00313536415432302d4630310a20000b [ 19.896] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 19.896] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 19.896] (II) intel(0): Printing probed modes for output LVDS1 [ 19.896] (II) intel(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP) [ 19.896] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d) [ 19.896] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d) [ 19.896] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 19.896] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 19.896] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 19.896] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 19.912] (II) intel(0): EDID for output VGA1 [ 19.928] (II) intel(0): EDID for output HDMI1 [ 19.976] (II) intel(0): EDID for output DP1 [ 19.976] (II) intel(0): Output LVDS1 connected [ 19.976] (II) intel(0): Output VGA1 disconnected [ 19.976] (II) intel(0): Output HDMI1 disconnected [ 19.976] (II) intel(0): Output DP1 disconnected [ 19.976] (II) intel(0): Using exact sizes for initial modes [ 19.976] (II) intel(0): Output LVDS1 using initial mode 1366x768 [ 19.976] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 19.976] (==) intel(0): DPI set to (96, 96) [ 19.976] (II) Loading sub module "dri2" [ 19.976] (II) LoadModule: "dri2" [ 19.976] (II) Module "dri2" already built-in [ 19.976] (II) UnloadModule: "vesa" [ 19.976] (II) Unloading vesa [ 19.976] (II) UnloadModule: "modesetting" [ 19.976] (II) Unloading modesetting [ 19.976] (II) UnloadModule: "fbdev" [ 19.976] (II) Unloading fbdev [ 19.976] (II) UnloadSubModule: "fbdevhw" [ 19.976] (II) Unloading fbdevhw [ 19.976] (==) Depth 24 pixmap format is 32 bpp [ 19.976] (II) intel(0): SNA initialized with SandyBridge backend [ 19.976] (==) intel(0): Backing store disabled [ 19.976] (==) intel(0): Silken mouse enabled [ 19.976] (II) intel(0): HW Cursor enabled [ 19.976] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 19.979] (==) intel(0): DPMS enabled [ 19.979] (II) intel(0): [DRI2] Setup complete [ 19.979] (II) intel(0): [DRI2] DRI driver: i965 [ 19.979] (II) intel(0): direct rendering: DRI2 Enabled [ 19.979] (==) intel(0): hotplug detection: "enabled" [ 19.979] (--) RandR disabled [ 19.986] (II) SELinux: Disabled on system [ 20.243] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 20.243] (II) AIGLX: enabled GLX_INTEL_swap_event [ 20.243] (II) AIGLX: enabled GLX_ARB_create_context [ 20.243] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 20.243] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 20.243] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 20.243] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 20.243] (II) AIGLX: Loaded and initialized i965 [ 20.243] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 20.244] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0) [ 20.264] (II) intel(0): Setting screen physical size to 361 x 203 [ 20.271] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.273] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 20.273] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.273] (II) LoadModule: "evdev" [ 20.274] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 20.290] (II) Module evdev: vendor="X.Org Foundation" [ 20.290] compiled for 1.13.3, module version = 2.7.3 [ 20.290] Module class: X.Org XInput Driver [ 20.290] ABI class: X.Org XInput driver, version 18.0 [ 20.290] (II) Using input driver 'evdev' for 'Power Button' [ 20.290] (**) Power Button: always reports core events [ 20.290] (**) evdev: Power Button: Device: "/dev/input/event2" [ 20.290] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 20.290] (--) evdev: Power Button: Found keys [ 20.290] (II) evdev: Power Button: Configuring as keyboard [ 20.291] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 20.291] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 20.291] (**) Option "xkb_rules" "evdev" [ 20.291] (**) Option "xkb_model" "pc105" [ 20.291] (**) Option "xkb_layout" "us,gr" [ 20.291] (**) Option "xkb_variant" "," [ 20.291] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll" [ 20.293] (II) XKB: reuse xkmfile /var/lib/xkb/server-9078D1F245FADE3CB4AD835262E1036C04792E56.xkm [ 20.294] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event5) [ 20.294] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall" [ 20.294] (II) Using input driver 'evdev' for 'Fujitsu FUJ02E3' [ 20.294] (**) Fujitsu FUJ02E3: always reports core events [ 20.294] (**) evdev: Fujitsu FUJ02E3: Device: "/dev/input/event5" [ 20.294] (--) evdev: Fujitsu FUJ02E3: Vendor 0 Product 0x6 [ 20.294] (--) evdev: Fujitsu FUJ02E3: Found keys [ 20.294] (II) evdev: Fujitsu FUJ02E3: Configuring as keyboard [ 20.294] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input5/event5" [ 20.294] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 7) [ 20.294] (**) Option "xkb_rules" "evdev" [ 20.294] (**) Option "xkb_model" "pc105" [ 20.294] (**) Option "xkb_layout" "us,gr" [ 20.294] (**) Option "xkb_variant" "," [ 20.294] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll" [ 20.295] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 20.295] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 20.295] (II) Using input driver 'evdev' for 'Video Bus' [ 20.295] (**) Video Bus: always reports core events [ 20.295] (**) evdev: Video Bus: Device: "/dev/input/event7" [ 20.295] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 20.295] (--) evdev: Video Bus: Found keys [ 20.295] (II) evdev: Video Bus: Configuring as keyboard [ 20.295] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7" [ 20.295] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 20.295] (**) Option "xkb_rules" "evdev" [ 20.295] (**) Option "xkb_model" "pc105" [ 20.295] (**) Option "xkb_layout" "us,gr" [ 20.295] (**) Option "xkb_variant" "," [ 20.295] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll" [ 20.295] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event4) [ 20.295] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall" [ 20.295] (II) Using input driver 'evdev' for 'Fujitsu FUJ02B1' [ 20.295] (**) Fujitsu FUJ02B1: always reports core events [ 20.295] (**) evdev: Fujitsu FUJ02B1: Device: "/dev/input/event4" [ 20.295] (--) evdev: Fujitsu FUJ02B1: Vendor 0 Product 0x6 [ 20.295] (--) evdev: Fujitsu FUJ02B1: Found keys [ 20.295] (II) evdev: Fujitsu FUJ02B1: Configuring as keyboard [ 20.295] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/FUJ02B1:00/input/input4/event4" [ 20.295] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD, id 9) [ 20.295] (**) Option "xkb_rules" "evdev" [ 20.295] (**) Option "xkb_model" "pc105" [ 20.296] (**) Option "xkb_layout" "us,gr" [ 20.296] (**) Option "xkb_variant" "," [ 20.296] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll" [ 20.296] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 20.296] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.296] (II) Using input driver 'evdev' for 'Power Button' [ 20.296] (**) Power Button: always reports core events [ 20.296] (**) evdev: Power Button: Device: "/dev/input/event0" [ 20.296] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 20.296] (--) evdev: Power Button: Found keys [ 20.296] (II) evdev: Power Button: Configuring as keyboard [ 20.296] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 20.296] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10) [ 20.296] (**) Option "xkb_rules" "evdev" [ 20.296] (**) Option "xkb_model" "pc105" [ 20.296] (**) Option "xkb_layout" "us,gr" [ 20.296] (**) Option "xkb_variant" "," [ 20.296] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll" [ 20.297] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 20.297] (II) No input driver specified, ignoring this device. [ 20.297] (II) This device may have been added with another device file. [ 20.297] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0 [ 20.297] (II) config/udev: Ignoring already known drm device (/dev/dri/card0) [ 20.297] (II) config/udev: Adding input device FJ Camera (/dev/input/event6) [ 20.297] (**) FJ Camera: Applying InputClass "evdev keyboard catchall" [ 20.297] (II) Using input driver 'evdev' for 'FJ Camera' [ 20.297] (**) FJ Camera: always reports core events [ 20.297] (**) evdev: FJ Camera: Device: "/dev/input/event6" [ 20.297] (--) evdev: FJ Camera: Vendor 0x4f2 Product 0xb302 [ 20.297] (--) evdev: FJ Camera: Found keys [ 20.297] (II) evdev: FJ Camera: Configuring as keyboard [ 20.297] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6/event6" [ 20.297] (II) XINPUT: Adding extended input device "FJ Camera" (type: KEYBOARD, id 11) [ 20.297] (**) Option "xkb_rules" "evdev" [ 20.297] (**) Option "xkb_model" "pc105" [ 20.297] (**) Option "xkb_layout" "us,gr" [ 20.297] (**) Option "xkb_variant" "," [ 20.297] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll" [ 20.298] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10) [ 20.298] (II) No input driver specified, ignoring this device. [ 20.298] (II) This device may have been added with another device file. [ 20.298] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8) [ 20.298] (II) No input driver specified, ignoring this device. [ 20.298] (II) This device may have been added with another device file. [ 20.298] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9) [ 20.298] (II) No input driver specified, ignoring this device. [ 20.298] (II) This device may have been added with another device file. [ 20.298] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 20.298] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 20.298] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 20.298] (**) AT Translated Set 2 keyboard: always reports core events [ 20.298] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 20.298] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 20.298] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 20.298] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 20.298] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 20.298] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12) [ 20.298] (**) Option "xkb_rules" "evdev" [ 20.298] (**) Option "xkb_model" "pc105" [ 20.298] (**) Option "xkb_layout" "us,gr" [ 20.298] (**) Option "xkb_variant" "," [ 20.298] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll" [ 20.300] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event11) [ 20.300] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall" [ 20.300] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse' [ 20.300] (**) PS/2 Generic Mouse: always reports core events [ 20.300] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event11" [ 20.300] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1 [ 20.300] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons [ 20.300] (--) evdev: PS/2 Generic Mouse: Found relative axes [ 20.300] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes [ 20.300] (II) evdev: PS/2 Generic Mouse: Configuring as mouse [ 20.300] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 [ 20.300] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 20.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11" [ 20.300] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 13) [ 20.301] (II) evdev: PS/2 Generic Mouse: initialized for relative axes. [ 20.301] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 [ 20.301] (**) PS/2 Generic Mouse: (accel) acceleration profile 0 [ 20.301] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000 [ 20.301] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4 [ 20.301] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0) [ 20.301] (II) No input driver specified, ignoring this device. [ 20.301] (II) This device may have been added with another device file. [ 21.917] (II) intel(0): EDID vendor "SEC", prod id 13378 [ 21.917] (II) intel(0): Printing DDC gathered Modelines: [ 21.917] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP) [ 23.755] (II) intel(0): EDID vendor "SEC", prod id 13378 [ 23.755] (II) intel(0): Printing DDC gathered Modelines: [ 23.755] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP) [ 32.947] (II) intel(0): EDID vendor "SEC", prod id 13378 [ 32.947] (II) intel(0): Printing DDC gathered Modelines: [ 32.947] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP) [ 33.249] (II) intel(0): EDID vendor "SEC", prod id 13378 [ 33.249] (II) intel(0): Printing DDC gathered Modelines: [ 33.249] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP) [ 33.595] (II) intel(0): EDID vendor "SEC", prod id 13378 [ 33.595] (II) intel(0): Printing DDC gathered Modelines: [ 33.595] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP) [ 34.030] (II) intel(0): EDID vendor "SEC", prod id 13378 [ 34.030] (II) intel(0): Printing DDC gathered Modelines: [ 34.030] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP) [ 36.367] (II) XKB: reuse xkmfile /var/lib/xkb/server-7F276D5C30B73806480019B1B76EDAC8C11C7B37.xkm [ 54.322] (II) intel(0): EDID vendor "SEC", prod id 13378 [ 54.322] (II) intel(0): Printing DDC gathered Modelines: [ 54.322] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP)

/sys/kernel/debug/dri/0/i915_error_state

Κώδικας: Επιλογή όλων: -LIFEBOOK-AH532:~$ /sys/kernel/debug/dri/0/i915_error_state bash: /sys/kernel/debug/dri/0/i915_error_state: Άρνηση πρόσβασης

Τον κώδικα τον βάζουμε μέσα σε [cοde]κώδικας[/cοde]. Επιλέγουμε το κείμενο και πατάμε το κουμπάκι Εικόνα .

από **eliasps** » 07 Ιουν 2013, 06:39

Γράψε την τελευταία εντολή έτσι:

Κώδικας: Επιλογή όλων: sudo cat /sys/kernel/debug/dri/0/i915_error_state

Δεν βλέπω κάτι στο log, ίσως δείξει κάτι η dmesg όταν παρουσιαστεί το πρόβλημα.

από **buenaventura** » 07 Ιουν 2013, 15:45

Για δες...
[

Κώδικας: Επιλογή όλων: cοde]*******@*******-LIFEBOOK-AH532:~$ sudo cat /sys/kernel/debug/dri/0/i915_error_state [sudo] password for********: no error state collected[/cοde]

από **madvinegar** » 07 Ιουν 2013, 15:57

Δεν βλέπω να το εχεις αναφερει πουθενα (σορυ αν το εχεις αναφερει) αλλα αυτο viewtopic.php?f=10&t=26518&p=281406#p281398 που σου ειπε ο eliasps το δοκιμασες?

Και εγω το ιδιο θεμα ειχα και μολις απενεργοποιησα το apport, δεν ξανακόλλησε ποτέ.

Πρόβλημα με τη κάρτα γραφικών???

Re: Πρόβλημα με τη κάρτα γραφικών???

Re: Πρόβλημα με τη κάρτα γραφικών???

Re: Πρόβλημα με τη κάρτα γραφικών???

Re: Πρόβλημα με τη κάρτα γραφικών???

Re: Πρόβλημα με τη κάρτα γραφικών???

Re: Πρόβλημα με τη κάρτα γραφικών???

Re: Πρόβλημα με τη κάρτα γραφικών???

Re: Πρόβλημα με τη κάρτα γραφικών???

Re: Πρόβλημα με τη κάρτα γραφικών???

Re: Πρόβλημα με τη κάρτα γραφικών???