Πως να χρησιμοποιησω USB 3.0 σε θυρα USB 2.0

[bbabis01]

Υπάρχει τρόπος να περάσω σκληρό με usb 3 σε υπολογιστή με θύρες για 2.0; Αν υπάρχει κανένα λογισμικό σκέφτομαι..

ΥΓ: Προφανώς δεν περιμένω ταχύτητα απλώς θέλω να δω τα αρχεία..

[lepidas]

και σε θυρα usb1.0 μπορεις να το βαλεις και να κανεις οτι θες

[bbabis01]

Μου εδωσαν εξωτερικο με usb3.0 και ολες οι θυρες στους υπολογιστες μου ειναι 2.0.. kai δεν αναγνωρίζει τίποτα..

[lepidas]

Μου εδωσαν εξωτερικο με usb3.0 και ολες οι θυρες στους υπολογιστες μου ειναι 2.0.. kai δεν αναγνωρίζει τίποτα..

1. συνεδεσε τον, δωσε στο τερματικο lsusb και δωσε εδω τα αποτελεσματα να δουμε.
2. ο σκληρος ειναι 3,5 ή 2,5 ιντσες?
3. στις πισω ή στις εμπρος θυρες τον βαζεις

[bbabis01]

1)

Κώδικας: Επιλογή όλων

Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0a5c:21b4 Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR
Bus 002 Device 003: ID 04f2:b249 Chicony Electronics Co., Ltd

2)είναι verbatim 1tb και από ότι βλέπω στο iντερνετ γράφει 2,5ιντσες..

3)στο λαπτοπ να υποθεσω δεν εχει διαφορα... στο σταθερο οι μπροστινες δε μπυ λειτουργουν οποτε πισω

[lepidas]

οντως δεν υπαρχει καποια αναφορα για αυτον στο lsusb αλλα το οτι ειναι 3.0 και οι θυρες 2.0 δεν παιζει κανενα ρολο

κανε κατι ακομα, αποσυνδεσε τον και συνδεσε τον παλι, τοτε ανοιξε το τερματικο και γραψε dmesg και δωσε τα αποτελεσματα

[Learner]

και σε θυρα usb1.0 μπορεις να το βαλεις και να κανεις οτι θες

Όχι αυτό, αυτό δεν ισχύει. Οι θύρες USB 1.0 δεν έχουν συμβατότητα με USB 3.0 .
Οι δίσκοι USB 3.0 έχουν συμβατότητα με USB 2.0 , αλλά όχι με USB 1.0

[bbabis01]

dmesg

Κώδικας: Επιλογή όλων

Script started on Δευ 09 Σεπ 2013 12:32:52 μμ EEST
#]0;babis@ubuntu: ~/Επιφάνεια εργασίας#babis@ubuntu:~/Επιφάνεια εργασίας$ dmesg##gsg######lsusb -t#########[2Pdmegsg####[1Psg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-21-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 (Ubuntu 3.8.0-21.32-generic 3.8.8)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=33b36af3-6c27-49cc-94ae-589fb56feb86 ro quiet splash acpi_backlight=vendor vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000157ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion g7 Notebook PC/166B, BIOS F.07 03/30/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x158000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 2 base 080000000 mask FE0000000 write-back
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 base 158000000 mask FF8000000 uncachable
[ 0.000000] 7 base 160000000 mask FE0000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x9b7fffff]
[ 0.000000] [mem 0x00000000-0x9b7fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x9b7fffff @ [mem 0x1fffc000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x157ffffff]
[ 0.000000] [mem 0x100000000-0x157ffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x157ffffff @ [mem 0x9b63c000-0x9b63efff]
[ 0.000000] RAMDISK: [mem 0x36122000-0x37088fff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000009b7fe120 00074 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000009b7e8000 1084A (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000009b75e000 00040
[ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 000000009b7e7000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
[ 0.000000] ACPI: BOOT 000000009b7e4000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 000000009b7e1000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000009b7de000 01608 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000157ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x157ffffff]
[ 0.000000] NODE_DATA [mem 0x157ffb000-0x157ffffff]
[ 0.000000] [ffffea0000000000-ffffea00055fffff] PMD -> [ffff880153800000-ffff8801575fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x157ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x9b63efff]
[ 0.000000] node 0: [mem 0x9b7ff000-0x9b7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x157ffffff]
[ 0.000000] On node 0 totalpages: 996813
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9881 pages used for memmap
[ 0.000000] DMA32 zone: 622503 pages, LIFO batch:31
[ 0.000000] Normal zone: 5632 pages used for memmap
[ 0.000000] Normal zone: 354816 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009b63f000 - 000000009b6bf000
[ 0.000000] PM: Registered nosave memory: 000000009b6bf000 - 000000009b7bf000
[ 0.000000] PM: Registered nosave memory: 000000009b7bf000 - 000000009b7ff000
[ 0.000000] PM: Registered nosave memory: 000000009b800000 - 00000000a0000000
[ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
[ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880157c00000 s85056 r8192 d21440 u262144
[ 0.000000] pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 981230
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=33b36af3-6c27-49cc-94ae-589fb56feb86 ro quiet splash acpi_backlight=vendor vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3825208k/5636096k available (7006k kernel code, 1648844k absent, 162044k reserved, 6238k data, 992k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16252928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2660.509 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5321.01 BogoMIPS (lpj=10642036)
[ 0.000009] pid_max: default: 32768 minimum: 301
[ 0.000056] Security Framework initialized
[ 0.000078] AppArmor: AppArmor initialized
[ 0.000080] Yama: becoming mindful.
[ 0.000681] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002350] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003043] Mount-cache hash table entries: 256
[ 0.003400] Initializing cgroup subsys cpuacct
[ 0.003404] Initializing cgroup subsys memory
[ 0.003416] Initializing cgroup subsys devices
[ 0.003418] Initializing cgroup subsys freezer
[ 0.003421] Initializing cgroup subsys blkio
[ 0.003424] Initializing cgroup subsys perf_event
[ 0.003429] Initializing cgroup subsys hugetlb
[ 0.003467] CPU: Physical Processor ID: 0
[ 0.003470] CPU: Processor Core ID: 0
[ 0.003478] mce: CPU supports 9 MCE banks
[ 0.003496] CPU0: Thermal monitoring enabled (TM1)
[ 0.003507] process: using mwait in idle threads
[ 0.003514] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.003514] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.003514] tlb_flushall_shift: 6
[ 0.003773] Freeing SMP alternatives: 24k freed
[ 0.007929] ACPI: Core revision 20121018
[ 0.053142] ftrace: allocating 26690 entries in 105 pages
[ 0.079790] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.559525] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz (fam: 06, model: 25, stepping: 05)
[ 0.665568] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.665579] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.665583] ... version: 3
[ 0.665585] ... bit width: 48
[ 0.665587] ... generic registers: 4
[ 0.665589] ... value mask: 0000ffffffffffff
[ 0.665591] ... max period: 000000007fffffff
[ 0.665593] ... fixed-purpose events: 3
[ 0.665595] ... event mask: 000000070000000f
[ 0.680777] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.667501] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.707362] Brought up 4 CPUs
[ 0.707369] smpboot: Total of 4 processors activated (21284.07 BogoMIPS)
[ 0.710933] devtmpfs: initialized
[ 0.712924] EVM: security.selinux
[ 0.712928] EVM: security.SMACK64
[ 0.712930] EVM: security.capability
[ 0.713025] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
[ 0.714806] regulator-dummy: no parameters
[ 0.714888] NET: Registered protocol family 16
[ 0.715169] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.715173] ACPI: bus type pci registered
[ 0.715292] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.715297] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.734067] PCI: Using configuration type 1 for base access
[ 0.735690] bio: create slab <bio-0> at 0
[ 0.735845] ACPI: Added _OSI(Module Device)
[ 0.735848] ACPI: Added _OSI(Processor Device)
[ 0.735851] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.735854] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.739881] ACPI: EC: Look up EC in DSDT
[ 0.749637] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.030927] ACPI: SSDT 000000009b691a18 00474 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 1.031906] ACPI: Dynamic OEM Table Load:
[ 1.031910] ACPI: SSDT (null) 00474 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 1.032264] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.033203] ACPI: Dynamic OEM Table Load:
[ 1.033207] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.033835] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.034894] ACPI: Dynamic OEM Table Load:
[ 1.034898] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.035204] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.036249] ACPI: Dynamic OEM Table Load:
[ 1.036253] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.039920] ACPI: Interpreter enabled
[ 1.039928] ACPI: (supports S0 S3 S4 S5)
[ 1.039989] ACPI: Using IOAPIC for interrupt routing
[ 1.445628] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 1.445843] ACPI: No dock devices found.
[ 1.445851] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.446455] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 1.446460] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.446679] \_SB_.PCI0:_OSC invalid UUID
[ 1.446681] _OSC request data:1 8 1f
[ 1.447781] PCI host bridge to bus 0000:00
[ 1.447788] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 1.447792] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.447796] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.447800] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.447804] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
[ 1.447819] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 1.447849] DMAR: Disabling batched IOTLB flush on Ironlake
[ 1.447885] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 1.447942] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.447965] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 1.447985] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[ 1.447996] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 1.448005] pci 0000:00:02.0: reg 20: [io 0x6050-0x6057]
[ 1.448107] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 1.448151] pci 0000:00:16.0: reg 10: [mem 0xc6504000-0xc650400f 64bit]
[ 1.448271] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.448331] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 1.448781] pci 0000:00:1a.0: reg 10: [mem 0xc650a000-0xc650a3ff]
[ 1.451387] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.451432] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 1.451460] pci 0000:00:1b.0: reg 10: [mem 0xc6500000-0xc6503fff 64bit]
[ 1.451582] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.451620] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 1.451753] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.451798] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 1.451925] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.451966] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[ 1.452091] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.452147] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 1.452591] pci 0000:00:1d.0: reg 10: [mem 0xc6509000-0xc65093ff]
[ 1.455195] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.455231] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 1.455342] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 1.455506] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 1.455542] pci 0000:00:1f.2: reg 10: [io 0x6048-0x604f]
[ 1.455557] pci 0000:00:1f.2: reg 14: [io 0x605c-0x605f]
[ 1.455573] pci 0000:00:1f.2: reg 18: [io 0x6040-0x6047]
[ 1.455588] pci 0000:00:1f.2: reg 1c: [io 0x6058-0x605b]
[ 1.455603] pci 0000:00:1f.2: reg 20: [io 0x6020-0x603f]
[ 1.455618] pci 0000:00:1f.2: reg 24: [mem 0xc6508000-0xc65087ff]
[ 1.455709] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.455744] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 1.455772] pci 0000:00:1f.3: reg 10: [mem 0xc6506000-0xc65060ff 64bit]
[ 1.455810] pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f]
[ 1.455877] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 1.455913] pci 0000:00:1f.6: reg 10: [mem 0xc6507000-0xc6507fff 64bit]
[ 1.456090] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
[ 1.456114] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.456134] pci 0000:01:00.0: reg 18: [mem 0xc6400000-0xc641ffff 64bit]
[ 1.456147] pci 0000:01:00.0: reg 20: [io 0x5000-0x50ff]
[ 1.456171] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 1.456219] pci 0000:01:00.0: supports D1 D2
[ 1.456253] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.456258] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 1.456263] pci 0000:00:01.0: bridge window [mem 0xc6400000-0xc64fffff]
[ 1.456270] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.456404] pci 0000:02:00.0: [14e4:4727] type 00 class 0x028000
[ 1.456442] pci 0000:02:00.0: reg 10: [mem 0xc5400000-0xc5403fff 64bit]
[ 1.456631] pci 0000:02:00.0: supports D1 D2
[ 1.463745] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.463752] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 1.463760] pci 0000:00:1c.0: bridge window [mem 0xc5400000-0xc63fffff]
[ 1.463770] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 1.463864] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 1.463887] pci 0000:03:00.0: reg 10: [io 0x3000-0x30ff]
[ 1.463923] pci 0000:03:00.0: reg 18: [mem 0xc1404000-0xc1404fff 64bit pref]
[ 1.463947] pci 0000:03:00.0: reg 20: [mem 0xc1400000-0xc1403fff 64bit pref]
[ 1.464043] pci 0000:03:00.0: supports D1 D2
[ 1.464046] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.471690] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.471698] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 1.471705] pci 0000:00:1c.1: bridge window [mem 0xc4400000-0xc53fffff]
[ 1.471716] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 1.471817] pci 0000:04:00.0: [10ec:5209] type 00 class 0xff0000
[ 1.471846] pci 0000:04:00.0: reg 10: [mem 0xc3400000-0xc3400fff]
[ 1.472033] pci 0000:04:00.0: supports D1 D2
[ 1.472037] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 1.479673] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 1.479681] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 1.479688] pci 0000:00:1c.2: bridge window [mem 0xc3400000-0xc43fffff]
[ 1.479698] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[ 1.479802] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 1.479819] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.479823] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.479826] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.479830] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
[ 1.479889] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 1.479964] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.479997] ACPI Warning: For \_SB_.PCI0.P0P1._PRT: Return Package has no elements (empty) (20121018/nspredef-463)
[ 1.480052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.480110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.480183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 1.480330] \_SB_.PCI0:_OSC invalid UUID
[ 1.480333] _OSC request data:1 1f 1f
[ 1.480339] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1.480342] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1.481663] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
[ 1.481769] PCI host bridge to bus 0000:7f
[ 1.481774] pci_bus 0000:7f: root bus resource [bus 7f]
[ 1.481785] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
[ 1.481822] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
[ 1.481860] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
[ 1.481894] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
[ 1.481930] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
[ 1.481963] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
[ 1.482023] pci0000:7f: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1.482026] pci0000:7f: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1.482300] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.482378] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.482453] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.482526] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.482601] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.482675] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.482754] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.482831] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.483009] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.483018] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.483023] vgaarb: loaded
[ 1.483025] vgaarb: bridge control possible 0000:01:00.0
[ 1.483027] vgaarb: no bridge control possible 0000:00:02.0
[ 1.483329] SCSI subsystem initialized
[ 1.483333] ACPI: bus type scsi registered
[ 1.483408] libata version 3.00 loaded.
[ 1.483437] ACPI: bus type usb registered
[ 1.483467] usbcore: registered new interface driver usbfs
[ 1.483482] usbcore: registered new interface driver hub
[ 1.483520] usbcore: registered new device driver usb
[ 1.483663] PCI: Using ACPI for IRQ routing
[ 1.489334] PCI: pci_cache_line_size set to 64 bytes
[ 1.489475] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 1.489479] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
[ 1.489482] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
[ 1.489621] NetLabel: Initializing
[ 1.489624] NetLabel: domain hash size = 128
[ 1.489626] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.489642] NetLabel: unlabeled traffic allowed by default
[ 1.489759] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.489769] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.491788] Switching to clocksource hpet
[ 1.500877] AppArmor: AppArmor Filesystem Enabled
[ 1.500919] pnp: PnP ACPI init
[ 1.500940] ACPI: bus type pnp registered
[ 1.501147] pnp 00:00: [dma 4]
[ 1.501189] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.501231] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.501452] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.501511] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.501603] system 00:04: [io 0x0680-0x069f] has been reserved
[ 1.501608] system 00:04: [io 0x0800-0x080f] has been reserved
[ 1.501613] system 00:04: [io 0xffff] has been reserved
[ 1.501617] system 00:04: [io 0xffff] has been reserved
[ 1.501621] system 00:04: [io 0x0400-0x047f] has been reserved
[ 1.501625] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.501628] system 00:04: [io 0x164e-0x164f] has been reserved
[ 1.501632] system 00:04: [io 0x0380-0x038e] has been reserved
[ 1.501638] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.501687] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.501753] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.501818] pnp 00:07: Plug and Play ACPI device, IDs SYN1e40 SYN1e00 SYN0002 PNP0f13 (active)
[ 1.502391] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.502397] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.502401] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.502405] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.502409] system 00:08: [mem 0xf0000000-0xf1ffffff] has been reserved
[ 1.502414] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.502418] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.502422] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.502427] system 00:08: [mem 0xc6600000-0xc6600fff] has been reserved
[ 1.502432] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.699605] pnp: PnP ACPI: found 9 devices
[ 1.699610] ACPI: ACPI bus type pnp unregistered
[ 1.707002] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 1.707082] pci 0000:01:00.0: BAR 6: assigned [mem 0xc6420000-0xc643ffff pref]
[ 1.707088] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.707093] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 1.707099] pci 0000:00:01.0: bridge window [mem 0xc6400000-0xc64fffff]
[ 1.707105] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.707112] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.707117] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 1.707126] pci 0000:00:1c.0: bridge window [mem 0xc5400000-0xc63fffff]
[ 1.707133] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 1.707144] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.707150] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 1.707159] pci 0000:00:1c.1: bridge window [mem 0xc4400000-0xc53fffff]
[ 1.707166] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 1.707177] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 1.707183] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 1.707191] pci 0000:00:1c.2: bridge window [mem 0xc3400000-0xc43fffff]
[ 1.707199] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[ 1.707209] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 1.707288] pci 0000:00:1e.0: setting latency timer to 64
[ 1.707295] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.707299] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.707314] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.707318] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
[ 1.707322] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 1.707326] pci_bus 0000:01: resource 1 [mem 0xc6400000-0xc64fffff]
[ 1.707330] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.707334] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 1.707337] pci_bus 0000:02: resource 1 [mem 0xc5400000-0xc63fffff]
[ 1.707341] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[ 1.707345] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 1.707348] pci_bus 0000:03: resource 1 [mem 0xc4400000-0xc53fffff]
[ 1.707352] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[ 1.707356] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 1.707359] pci_bus 0000:04: resource 1 [mem 0xc3400000-0xc43fffff]
[ 1.707363] pci_bus 0000:04: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
[ 1.707367] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 1.707370] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 1.707374] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.707378] pci_bus 0000:05: resource 7 [mem 0xa0000000-0xfeafffff]
[ 1.707437] NET: Registered protocol family 2
[ 1.707716] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.707928] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.708077] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.708113] TCP: reno registered
[ 1.708131] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.708163] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.708278] NET: Registered protocol family 1
[ 1.708302] pci 0000:00:02.0: Boot video device
[ 1.739340] PCI: CLS 64 bytes, default 64
[ 1.739417] Trying to unpack rootfs image as initramfs...
[ 2.268107] Freeing initrd memory: 15772k freed
[ 2.272342] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.272352] software IO TLB [mem 0x9763c000-0x9b63c000] (64MB) mapped at [ffff88009763c000-ffff88009b63bfff]
[ 2.272428] Simple Boot Flag at 0x44 set to 0x1
[ 2.273044] Initialise module verification
[ 2.273126] audit: initializing netlink socket (disabled)
[ 2.273151] type=2000 audit(1378729670.704:1): initialized
[ 2.330482] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.332887] VFS: Disk quotas dquot_6.5.2
[ 2.332965] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.333774] fuse init (API version 7.20)
[ 2.333938] msgmni has been set to 7501
[ 2.334686] Key type asymmetric registered
[ 2.334690] Asymmetric key parser 'x509' registered
[ 2.334751] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.334801] io scheduler noop registered
[ 2.334804] io scheduler deadline registered (default)
[ 2.334813] io scheduler cfq registered
[ 2.335008] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 2.335278] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.335301] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.335365] intel_idle: MWAIT substates: 0x1120
[ 2.335368] intel_idle: v0.4 model 0x25
[ 2.335370] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.453841] ACPI: AC Adapter [ACAD] (off-line)
[ 2.453951] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.453958] ACPI: Power Button [PWRB]
[ 2.454017] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 2.461672] ACPI: Lid Switch [LID0]
[ 2.461749] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.461754] ACPI: Power Button [PWRF]
[ 2.461886] ACPI: Requesting acpi_cpufreq
[ 2.896906] [Firmware Bug]: Invalid critical threshold (0)
[ 2.948775] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.948780] ACPI: Thermal Zone [TZ01] (57 C)
[ 2.948833] GHES: HEST is not enabled!
[ 2.948948] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.951220] Linux agpgart interface v0.103
[ 2.951340] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 2.951462] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.952444] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 2.952626] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 2.954738] brd: module loaded
[ 2.955903] loop: module loaded
[ 2.956457] libphy: Fixed MDIO Bus: probed
[ 2.956557] tun: Universal TUN/TAP device driver, 1.6
[ 2.956559] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.956625] PPP generic driver version 2.4.2
[ 2.956707] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.956710] ehci-pci: EHCI PCI platform driver
[ 2.956759] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2.956766] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.956775] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.956797] ehci-pci 0000:00:1a.0: debug port 2
[ 2.960698] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.960724] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc650a000
[ 2.972376] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.972412] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.972416] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.972420] usb usb1: Product: EHCI Host Controller
[ 2.972423] usb usb1: Manufacturer: Linux 3.8.0-21-generic ehci_hcd
[ 2.972426] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.972588] hub 1-0:1.0: USB hub found
[ 2.972595] hub 1-0:1.0: 3 ports detected
[ 2.972778] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2.972784] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.972792] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.972813] ehci-pci 0000:00:1d.0: debug port 2
[ 2.976713] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.976735] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc6509000
[ 2.988339] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.988361] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.988365] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.988369] usb usb2: Product: EHCI Host Controller
[ 2.988373] usb usb2: Manufacturer: Linux 3.8.0-21-generic ehci_hcd
[ 2.988376] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.988520] hub 2-0:1.0: USB hub found
[ 2.988527] hub 2-0:1.0: 3 ports detected
[ 2.988664] ehci-platform: EHCI generic platform driver
[ 2.988676] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.988697] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.988791] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.998719] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.998728] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.998892] mousedev: PS/2 mouse device common for all mice
[ 2.999376] rtc_cmos 00:05: RTC can wake from S4
[ 2.999528] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.999567] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.999701] device-mapper: uevent: version 1.0.3
[ 2.999793] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 2.999894] cpuidle: using governor ladder
[ 3.000022] cpuidle: using governor menu
[ 3.000030] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.000033] EFI Variables Facility v0.08 2004-May-17
[ 3.000315] ashmem: initialized
[ 3.000559] TCP: cubic registered
[ 3.000723] NET: Registered protocol family 10
[ 3.001001] NET: Registered protocol family 17
[ 3.001018] Key type dns_resolver registered
[ 3.001599] Loading module verification certificates
[ 3.003484] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: da639d7d39047796a6cdf66158dce65752f170ea'
[ 3.003503] registered taskstats version 1
[ 3.007722] Key type trusted registered
[ 3.010994] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.011065] Key type encrypted registered
[ 3.015283] rtc_cmos 00:05: setting system clock to 2013-09-09 12:27:52 UTC (1378729672)
[ 3.016947] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.016950] EDD information not available.
[ 3.267768] tsc: Refined TSC clocksource calibration: 2660.459 MHz
[ 3.267777] Switching to clocksource tsc
[ 3.283723] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.416179] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.416185] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.416719] hub 1-1:1.0: USB hub found
[ 3.416924] hub 1-1:1.0: 6 ports detected
[ 3.431430] ACPI: Battery Slot [BAT0] (battery present)
[ 3.434207] Freeing unused kernel memory: 992k freed
[ 3.434450] Write protecting the kernel read-only data: 12288k
[ 3.440914] Freeing unused kernel memory: 1176k freed
[ 3.446687] Freeing unused kernel memory: 1080k freed
[ 3.467697] udevd[108]: starting version 175
[ 3.527132] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 3.657836] Disabling lock debugging due to kernel taint
[ 3.659160] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.659169] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.659456] hub 2-1:1.0: USB hub found
[ 3.659522] hub 2-1:1.0: 8 ports detected
[ 3.660275] rtsx_pci 0000:04:00.0: irq 41 for MSI/MSI-X
[ 3.660303] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
[ 3.660412] ahci 0000:00:1f.2: version 3.0
[ 3.660522] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 3.660669] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
[ 3.660680] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[ 3.660690] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.662871] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.663138] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 3.663479] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc90000670000, 2c:27:d7:cf:8e:91, XID 00a00000 IRQ 43
[ 3.676454] scsi0 : ahci
[ 3.676610] scsi1 : ahci
[ 3.676743] scsi2 : ahci
[ 3.677495] scsi3 : ahci
[ 3.677636] scsi4 : ahci
[ 3.677766] scsi5 : ahci
[ 3.677838] ata1: SATA max UDMA/133 abar m2048@0xc6508000 port 0xc6508100 irq 42
[ 3.677844] ata2: SATA max UDMA/133 abar m2048@0xc6508000 port 0xc6508180 irq 42
[ 3.677847] ata3: DUMMY
[ 3.677849] ata4: DUMMY
[ 3.677852] ata5: DUMMY
[ 3.677856] ata6: SATA max UDMA/133 abar m2048@0xc6508000 port 0xc6508380 irq 42
[ 3.730777] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 3.827833] usb 1-1.3: New USB device found, idVendor=0a5c, idProduct=21b4
[ 3.827840] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.827844] usb 1-1.3: Product: Broadcom 2070 Bluetooth
[ 3.827848] usb 1-1.3: Manufacturer: Broadcom Corp
[ 3.827851] usb 1-1.3: SerialNumber: CC52AFA4723F
[ 3.930334] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 3.994077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.994116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.994561] ata1.00: ATA-8: TOSHIBA MK5061GSYN, MH000C, max UDMA/100
[ 3.994567] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.995156] ata1.00: configured for UDMA/100
[ 3.995481] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5061GS MH00 PQ: 0 ANSI: 5
[ 3.995723] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.995737] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.995857] sd 0:0:0:0: [sda] Write Protect is off
[ 3.995865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.996004] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.997245] ata2.00: ATAPI: hp DVD A DS8A5LH, 1H68, max UDMA/100
[ 3.998034] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.998762] ata2.00: configured for UDMA/100
[ 4.005932] scsi 1:0:0:0: CD-ROM hp DVD A DS8A5LH 1H68 PQ: 0 ANSI: 5
[ 4.011538] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.011543] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.011723] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.011853] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.077505] usb 2-1.5: New USB device found, idVendor=04f2, idProduct=b249
[ 4.077512] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 4.077516] usb 2-1.5: Product: HP Webcam-101
[ 4.077520] usb 2-1.5: Manufacturer: Chicony Electronics Co., Ltd.
[ 4.077524] usb 2-1.5: SerialNumber: SN0001
[ 4.098976] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 4.100418] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.579927] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 22.808589] Adding 2929660k swap on /dev/sda5. Priority:-1 extents:1 across:2929660k
[ 22.855446] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.904998] udevd[379]: starting version 175
[ 23.027711] lp: driver loaded but no devices found
[ 23.147022] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 23.147029] AMD IOMMUv2 functionality not available on this system
[ 23.149149] mei 0000:00:16.0: setting latency timer to 64
[ 23.149226] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 23.164431] wmi: Mapper loaded
[ 23.169417] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 23.175286] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 23.175295] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.175299] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 23.175302] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20121018/utaddress-251)
[ 23.175306] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20121018/utaddress-251)
[ 23.175309] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.175311] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 23.175314] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20121018/utaddress-251)
[ 23.175317] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20121018/utaddress-251)
[ 23.175320] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.175322] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 23.175325] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20121018/utaddress-251)
[ 23.175328] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20121018/utaddress-251)
[ 23.175331] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.175332] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 23.175473] [drm] Initialized drm 1.1.0 20060810
[ 23.195587] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 23.195618] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 23.195643] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 23.195691] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 23.202267] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3596 MBytes.
[ 23.202474] <6>[fglrx] vendor: 1002 device: 6760 count: 1
[ 23.202750] <6>[fglrx] ioport: bar 4, base 0x5000, size: 0x100
[ 23.202762] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 23.202871] <6>[fglrx] Kernel PAT support is enabled
[ 23.202895] <6>[fglrx] module loaded - fglrx 12.10.5 [Mar 28 2013] with 1 minors
[ 23.203650] i915 0000:00:02.0: setting latency timer to 64
[ 23.207462] bcma: bus0: Bus registered
[ 23.220624] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 23.229922] type=1400 audit(1378718892.760:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=613 comm="apparmor_parser"
[ 23.230328] type=1400 audit(1378718892.760:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=613 comm="apparmor_parser"
[ 23.230564] type=1400 audit(1378718892.760:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=613 comm="apparmor_parser"
[ 23.238396] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 23.238409] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 23.238410] [drm] Driver supports precise vblank timestamp query.
[ 23.238559] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 23.238562] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 23.246014] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 23.324194] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20121018/dsopcode-236)
[ 23.324202] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880151de95a0), AE_AML_BUFFER_LIMIT (20121018/psparse-537)
[ 23.324212] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880151de9780), AE_AML_BUFFER_LIMIT (20121018/psparse-537)
[ 23.324248] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20121018/dsopcode-236)
[ 23.324252] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880151de95a0), AE_AML_BUFFER_LIMIT (20121018/psparse-537)
[ 23.324259] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880151de9780), AE_AML_BUFFER_LIMIT (20121018/psparse-537)
[ 23.325453] input: HP WMI hotkeys as /devices/virtual/input/input4
[ 23.325814] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20121018/dsopcode-236)
[ 23.325821] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880151de95a0), AE_AML_BUFFER_LIMIT (20121018/psparse-537)
[ 23.325830] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880151de9780), AE_AML_BUFFER_LIMIT (20121018/psparse-537)
[ 23.325867] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20121018/dsopcode-236)
[ 23.325871] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880151de95a0), AE_AML_BUFFER_LIMIT (20121018/psparse-537)
[ 23.325879] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880151de9780), AE_AML_BUFFER_LIMIT (20121018/psparse-537)
[ 23.333446] cfg80211: Calling CRDA to update world regulatory domain
[ 23.365782] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 16
[ 23.375421] Bluetooth: Core ver 2.16
[ 23.375443] NET: Registered protocol family 31
[ 23.375445] Bluetooth: HCI device and connection manager initialized
[ 23.375601] Bluetooth: HCI socket layer initialized
[ 23.375605] Bluetooth: L2CAP socket layer initialized
[ 23.375611] Bluetooth: SCO socket layer initialized
[ 23.378976] usbcore: registered new interface driver btusb
[ 23.404722] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 23.406886] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[ 23.408711] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[ 23.410312] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 23.430837] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 23.455405] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 23.466692] cfg80211: World regulatory domain updated:
[ 23.466698] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 23.466700] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.466701] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 23.466703] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 23.466704] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.466705] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.471826] fbcon: inteldrmfb (fb0) is primary device
[ 23.585053] Linux video capture interface: v2.00
[ 23.590382] uvcvideo: Found UVC 1.00 device HP Webcam-101 (04f2:b249)
[ 23.603517] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input5
[ 23.603735] usbcore: registered new interface driver uvcvideo
[ 23.603736] USB Video Class driver (1.1.1)
[ 24.130718] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1678, fw id: 706628
[ 24.178233] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 24.242974] Console: switching to colour frame buffer device 200x56
[ 24.246410] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 24.246412] i915 0000:00:02.0: registered panic notifier
[ 24.252009] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 24.252068] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 24.252259] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 24.252301] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/LNXVIDEO:02/input/input8
[ 24.253221] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 24.253253] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 24.253433] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 24.253750] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 24.273726] BUG: unable to handle kernel paging request at ffff88012fd0ffe0
[ 24.273785] IP: [<ffffffffa074c820>] patch_generic_hdmi+0xe0/0x550 [snd_hda_codec_hdmi]
[ 24.273840] PGD 1c0e063 PUD 9b63c067 PMD 131197063 PTE 800000012fd0f161
[ 24.273893] Oops: 0003 [#1] SMP
[ 24.273925] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_idt joydev(F) uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev arc4(F) coretemp kvm_intel kvm btusb bluetooth brcmsmac cordic(F) brcmutil mac80211 cfg80211 hp_wmi sparse_keymap snd_hda_intel(+) snd_hda_codec snd_hwdep(F) snd_pcm(F) snd_page_alloc(F) snd_seq_midi(F) snd_seq_midi_event(F) microcode(F) snd_rawmidi(F) snd_seq(F) snd_seq_device(F) snd_timer(F) psmouse(F) snd(F) serio_raw(F) intel_ips i915 bcma rtsx_pci_ms fglrx(POF) drm_kms_helper memstick lpc_ich soundcore(F) wmi drm i2c_algo_bit mei amd_iommu_v2 video(F) mac_hid lp(F) parport(F) rtsx_pci_sdmmc r8169 rtsx_pci ahci(F) libahci(F)
[ 24.274430] CPU 3
[ 24.274443] Pid: 535, comm: modprobe Tainted: PF O 3.8.0-21-generic #32-Ubuntu Hewlett-Packard HP Pavilion g7 Notebook PC/166B
[ 24.274497] RIP: 0010:[<ffffffffa074c820>] [<ffffffffa074c820>] patch_generic_hdmi+0xe0/0x550 [snd_hda_codec_hdmi]
[ 24.274543] RSP: 0018:ffff8801308c9ac0 EFLAGS: 00010283
[ 24.274567] RAX: 0000000000000008 RBX: 0000000000000002 RCX: 0000000000000002
[ 24.274595] RDX: ffff88012fd0ffd8 RSI: ffff88012fd0ffe0 RDI: ffff88014cfe0420
[ 24.274625] RBP: ffff8801308c9af8 R08: 0000000000000001 R09: 0000000000000006
[ 24.274655] R10: 00000000000000f8 R11: 0000000000000014 R12: ffff88014cfe0000
[ 24.274686] R13: 0000000000000000 R14: 0000000000000002 R15: ffff88012fd10000
[ 24.274716] FS: 00007f03e4197740(0000) GS:ffff880157cc0000(0000) knlGS:0000000000000000
[ 24.274749] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 24.274773] CR2: ffff88012fd0ffe0 CR3: 000000013081e000 CR4: 00000000000007e0
[ 24.274803] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 24.274832] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 24.274860] Process modprobe (pid: 535, threadinfo ffff8801308c8000, task ffff8801308c0000)
[ 24.274892] Stack:
[ 24.274905] 00000000ffffffff ffffffffa0750002 ffffffffa074e880 0000000000000001
[ 24.274951] ffff88014cfe0000 00000000ffffffff ffffffffa0750000 ffff8801308c9b58
[ 24.274996] ffffffffa0789186 2d6164682d646e73 64692d6365646f63 303832363830383a
[ 24.275043] Call Trace:
[ 24.275068] [<ffffffffa0789186>] snd_hda_codec_configure+0x146/0x440 [snd_hda_codec]
[ 24.275105] [<ffffffffa07bc2f0>] azx_probe_continue+0x3a0/0x4f0 [snd_hda_intel]
[ 24.275138] [<ffffffffa07ba8b0>] ? azx_attach_pcm_stream+0x1e0/0x1e0 [snd_hda_intel]
[ 24.275172] [<ffffffffa07bbcb0>] ? azx_halt+0x30/0x30 [snd_hda_intel]
[ 24.275202] [<ffffffffa07ba6d0>] ? azx_pcm_trigger+0x580/0x580 [snd_hda_intel]
[ 24.275234] [<ffffffffa07bb810>] ? azx_runtime_suspend+0x30/0x30 [snd_hda_intel]
[ 24.275266] [<ffffffffa07b8670>] ? azx_pcm_free+0x50/0x50 [snd_hda_intel]
[ 24.275297] [<ffffffffa07bc79a>] azx_probe+0x35a/0x940 [snd_hda_intel]
[ 24.275329] [<ffffffff8137b4cb>] local_pci_probe+0x4b/0x80
[ 24.275354] [<ffffffff8137b7f1>] pci_device_probe+0x111/0x120
[ 24.275383] [<ffffffff81455717>] driver_probe_device+0x77/0x230
[ 24.275410] [<ffffffff8145597b>] __driver_attach+0xab/0xb0
[ 24.275436] [<ffffffff814558d0>] ? driver_probe_device+0x230/0x230
[ 24.275463] [<ffffffff81453a2d>] bus_for_each_dev+0x5d/0xa0
[ 24.275489] [<ffffffff8145521e>] driver_attach+0x1e/0x20
[ 24.275514] [<ffffffff81454df0>] bus_add_driver+0x190/0x280
[ 24.275545] [<ffffffffa07c3000>] ? 0xffffffffa07c2fff
[ 24.275569] [<ffffffff81456047>] driver_register+0x77/0x170
[ 24.275595] [<ffffffffa07c3000>] ? 0xffffffffa07c2fff
[ 24.275619] [<ffffffff8137a6bc>] __pci_register_driver+0x4c/0x50
[ 24.275647] [<ffffffffa07c301e>] azx_driver_init+0x1e/0x1000 [snd_hda_intel]
[ 24.275678] [<ffffffff8100215a>] do_one_initcall+0x12a/0x180
[ 24.275707] [<ffffffff810bff17>] load_module+0x10c7/0x1520
[ 24.275731] [<ffffffff810bb880>] ? unset_module_init_ro_nx+0x80/0x80
[ 24.275759] [<ffffffff810c0435>] sys_init_module+0xc5/0xf0
[ 24.275786] [<ffffffff816d37dd>] system_call_fastpath+0x1a/0x1f
[ 24.275811] Code: 0f 1f 00 4d 8b bc 24 c0 00 00 00 25 00 e0 00 00 c1 e8 0c 83 c8 01 49 63 17 83 c0 01 83 f8 10 48 8d 14 92 49 8d 14 d7 48 8d 72 08 <66> 89 5a 08 c7 46 08 02 00 00 00 0f 86 5b 02 00 00 48 8d 4e 18
[ 24.278054] RIP [<ffffffffa074c820>] patch_generic_hdmi+0xe0/0x550 [snd_hda_codec_hdmi]
[ 24.279887] RSP <ffff8801308c9ac0>
[ 24.281708] CR2: ffff88012fd0ffe0
[ 24.281711] ---[ end trace 7974a6bdf05a5c10 ]---
[ 25.384096] Bluetooth: hci0 command 0x1009 tx timeout
[ 25.789724] init: failsafe main process (912) killed by TERM signal
[ 25.897976] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.897982] Bluetooth: BNEP filters: protocol multicast
[ 25.897994] Bluetooth: BNEP socket layer initialized
[ 25.900081] Bluetooth: RFCOMM TTY layer initialized
[ 25.900097] Bluetooth: RFCOMM socket layer initialized
[ 25.900098] Bluetooth: RFCOMM ver 1.11
[ 25.929849] type=1400 audit(1378718895.464:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1017 comm="apparmor_parser"
[ 25.929859] type=1400 audit(1378718895.464:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1018 comm="apparmor_parser"
[ 25.930183] type=1400 audit(1378718895.464:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1017 comm="apparmor_parser"
[ 25.930252] type=1400 audit(1378718895.464:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1018 comm="apparmor_parser"
[ 25.932944] type=1400 audit(1378718895.468:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1020 comm="apparmor_parser"
[ 25.933349] type=1400 audit(1378718895.468:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1019 comm="apparmor_parser"
[ 25.933357] type=1400 audit(1378718895.468:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1020 comm="apparmor_parser"
[ 26.105393] ppdev: user-space parallel port driver
[ 26.110538] init: avahi-cups-reload main process (1066) terminated with status 1
[ 26.456961] init: alsa-restore main process (1109) terminated with status 19
[ 26.961572] vboxdrv: Found 4 processor cores.
[ 26.961729] vboxdrv: fAsync=0 offMin=0xe7 offMax=0x2803
[ 26.961831] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 26.961833] vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
[ 26.986083] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 26.986099] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 26.986303] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.987283] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.987648] vboxpci: IOMMU not found (not registered)
[ 27.470172] r8169 0000:03:00.0 eth0: link down
[ 27.470226] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.471008] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.531882] fglrx_pci 0000:01:00.0: irq 47 for MSI/MSI-X
[ 28.532359] <6>[fglrx] Fi

[lepidas]

δεν δειχνει οτι συνδεθηκε κατι. περιμενε μηπως εχει καποιος κατι να πει

[bbabis01]

δεν δειχνει οτι συνδεθηκε κατι. περιμενε μηπως εχει καποιος κατι να πει

ωραίος, δε πειράζει.. περιμένω για άλλον : )