Έλεγχος σκληρού δίσκου Hardware

[fotisdri]

Κώδικας: Επιλογή όλων

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-35-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: KINGSTON SV300S37A120G
Serial Number: 50026B774402C083
LU WWN Device Id: 5 0026b7 74402c083
Firmware Version: 527ABBF0
User Capacity: 120.034.123.776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Aug 31 12:14:00 2014 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 1) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 36) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0033 095 095 050 Pre-fail Always - 0/4067660
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours_and_Msec 0x0032 099 099 000 Old_age Always - 1153h+27m+56.940s
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 383
171 Program_Fail_Count 0x000a 000 000 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 67
177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 0
181 Program_Fail_Count 0x000a 000 000 000 Old_age Always - 0
182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0
189 Airflow_Temperature_Cel 0x0000 039 052 000 Old_age Offline - 39 (Min/Max 20/52)
194 Temperature_Celsius 0x0022 039 052 000 Old_age Always - 39 (Min/Max 20/52)
195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/4067660
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/4067660
204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/4067660
230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always - 0
233 SandForce_Internal 0x0032 000 000 000 Old_age Always - 1020
234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 1084
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 1084
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 1405

SMART Error Log not supported

SMART Self-test Log not supported

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Για ριχτε μια ματια κολλαει το pc μην μου πειτε οτι θελει σκληρο ουτε
μηνο δεν τον εχω

[Learner]

Για ριχτε μια ματια κολλαει το pc μην μου πειτε οτι θελει σκληρο ουτε
μηνο δεν τον εχω

Εντάξει είναι ο δίσκος. Ανεξαρτήτως όμως αυτού, το ότι τον έχεις ένα μήνα μόνο δεν έχει καμία σημασία. Εννοώ ότι, θα μπορούσε να ήταν ελαττωματικός.

Τσέκαρε καμιά κάρτα γραφικών, drivers, να δεις μήπως φταίει κάτι τέτοιο. Και όταν λες κολλάει, τι ακριβώς γίνεται ; κολλάει όλο το γραφικό περιβάλλον, κολλάει μόνον ο κέρσορας αλλά το πληκτρολόγιο δουλεύει; τι ακριβώς;

[fotisdri]

Κολαγε δεν κουνιαταν τιποτα μονο την φωτεινοτητα μπορουσα να αθξησω η να μειωσω απο οτι καταλαβα ηταν θεμα drive καρτας γραφικων.τωρα περασα ξανα τους drivers και δεν εχω δει να κολαει θα δειξει το μελλον..

[astone42]

Αυτά είναι τα αποτελέσματα, έχω τρομέρα κολλήματα και στο boot μία τον βλέπει και μία δεν τον βλέπει τον δίσκο. Αλλάζω δίσκο ; (Το memtest86+ για την μνήμη Ram τα δείχνει όλα οκ).

Όταν βλέπει τον δίσκο και κάνει boot από αυτόν μετά από 1-10 λεπτά αρχίζει να μην ανταποκρίνεται και εν τέλει κρασάρει τελείως.

Spoiler: show

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST31500341AS
Serial Number: 9VS3D8HK
LU WWN Device Id: 5 000c50 01a8643e3
Firmware Version: CC1H
User Capacity: 1.500.301.910.016 bytes [1,50 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sun Sep 28 10:09:14 2014 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 293) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 102 098 006 Pre-fail Always - 9686054
3 Spin_Up_Time 0x0003 100 091 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2298
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 34
7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 628225163
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 20928
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 23
12 Power_Cycle_Count 0x0032 098 037 020 Old_age Always - 2353
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 124
188 Command_Timeout 0x0032 100 097 000 Old_age Always - 1135
189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 1072
190 Airflow_Temperature_Cel 0x0022 064 051 045 Old_age Always - 36 (Min/Max 36/36)
194 Temperature_Celsius 0x0022 036 049 000 Old_age Always - 36 (0 15 0 0 0)
195 Hardware_ECC_Recovered 0x001a 061 029 000 Old_age Always - 9686054
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 465
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 465
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 32963874017703
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2772258090
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3429467585

SMART Error Log Version: 1
ATA Error Count: 93 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 93 occurred at disk power-on lifetime: 20928 hours (872 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f9 27 63 00 Error: UNC at LBA = 0x006327f9 = 6498297

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f8 27 63 40 00 00:00:04.724 READ DMA EXT
25 00 08 f8 27 63 40 00 00:00:01.980 READ DMA EXT
35 00 02 07 17 88 40 00 00:00:01.979 WRITE DMA EXT
25 00 01 07 17 88 40 00 00:00:01.978 READ DMA EXT
25 00 01 08 17 88 40 00 00:00:01.978 READ DMA EXT

Error 92 occurred at disk power-on lifetime: 20928 hours (872 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f9 27 63 00 Error: UNC at LBA = 0x006327f9 = 6498297

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f8 27 63 40 00 00:00:01.980 READ DMA EXT
35 00 02 07 17 88 40 00 00:00:01.979 WRITE DMA EXT
25 00 01 07 17 88 40 00 00:00:01.978 READ DMA EXT
25 00 01 08 17 88 40 00 00:00:01.978 READ DMA EXT
25 00 02 07 17 88 40 00 00:00:01.971 READ DMA EXT

Error 91 occurred at disk power-on lifetime: 20928 hours (872 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f9 27 63 00 Error: UNC at LBA = 0x006327f9 = 6498297

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f8 27 63 40 00 00:00:04.724 READ DMA EXT
25 00 08 f8 27 63 40 00 00:00:01.997 READ DMA EXT
35 00 02 07 17 88 40 00 00:00:01.996 WRITE DMA EXT
25 00 01 07 17 88 40 00 00:00:01.995 READ DMA EXT
25 00 01 08 17 88 40 00 00:00:01.995 READ DMA EXT

Error 90 occurred at disk power-on lifetime: 20928 hours (872 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f9 27 63 00 Error: UNC at LBA = 0x006327f9 = 6498297

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f8 27 63 40 00 00:00:01.997 READ DMA EXT
35 00 02 07 17 88 40 00 00:00:01.996 WRITE DMA EXT
25 00 01 07 17 88 40 00 00:00:01.995 READ DMA EXT
25 00 01 08 17 88 40 00 00:00:01.995 READ DMA EXT
25 00 02 07 17 88 40 00 00:00:01.988 READ DMA EXT

Error 89 occurred at disk power-on lifetime: 20927 hours (871 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f9 27 63 00 Error: UNC at LBA = 0x006327f9 = 6498297

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f8 27 63 40 00 00:00:04.716 READ DMA EXT
25 00 08 f8 27 63 40 00 00:00:01.989 READ DMA EXT
35 00 02 07 17 88 40 00 00:00:01.988 WRITE DMA EXT
25 00 01 07 17 88 40 00 00:00:01.987 READ DMA EXT
25 00 01 08 17 88 40 00 00:00:01.987 READ DMA EXT

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 20927 6498297
# 2 Short offline Completed: read failure 90% 20927 6498297
# 3 Extended offline Completed: read failure 90% 20927 6498297

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[the_eye]

Αλλάζω δίσκο ;

Ναι

[astone42]

Σε ευχαριστω για την αμεση απαντηση. Ξεμεινα απο pc εν μεσω εξεταστικης ! Απο το tablet γραφω τωρα. Ευχαριστω και παλι, αυριο θα παρω εναν καινουργιο να τελειωνω!

[Lionux]

Συμφορουμίτες εκανα κ εγω το τεστ στον σκληρο μου δισκο που τον εχω 10 χρονια ! Σε τι κατασταση βλεπετε την υγεια του ; Να παρω αμεσα backup ? Ευχαριστω εκ των προτερων !

Κώδικας: Επιλογή όλων

smartctl 6.2 2013-07-26 r3841 [i686-linux-3.11.0-24-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K80
Device Model: HTS548060M9AT00
Serial Number: MRLB41L4G3V0HC
Firmware Version: MGBOA50A
User Capacity: 60.011.642.880 bytes [60,0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-6 T13/1410D revision 3a
Local Time is: Sun Sep 28 11:24:35 2014 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 46) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 1
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 179 179 033 Pre-fail Always - 2
4 Start_Stop_Count 0x0012 097 097 000 Old_age Always - 6133
5 Reallocated_Sector_Ct 0x0033 093 093 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 962
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 5587
191 G-Sense_Error_Rate 0x000a 085 085 000 Old_age Always - 13828096
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 344
193 Load_Cycle_Count 0x0012 089 089 000 Old_age Always - 116725
194 Temperature_Celsius 0x0002 177 177 000 Old_age Always - 31 (8 238 0 7 0)
196 Reallocated_Event_Count 0x0032 091 091 000 Old_age Always - 669
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 209 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 209 occurred at disk power-on lifetime: 462 hours (19 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 b8 4f 3d e4 Error: UNC 8 sectors at LBA = 0x043d4fb8 = 71126968

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 b8 4f 3d e4 00 01:28:48.500 READ DMA
ca 00 38 80 09 0d e0 00 01:28:48.500 WRITE DMA
27 00 00 00 00 00 e0 00 01:28:48.500 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 02 01:28:48.500 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 01:28:48.500 SET FEATURES [Set transfer mode]

Error 208 occurred at disk power-on lifetime: 462 hours (19 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 b8 4f 3d e4 Error: UNC 8 sectors at LBA = 0x043d4fb8 = 71126968

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 b8 4f 3d e4 00 01:28:44.600 READ DMA
c8 00 08 b0 4f 3d e4 00 01:28:44.600 READ DMA
c8 00 08 a8 4f 3d e4 00 01:28:44.600 READ DMA
c8 00 08 a0 4f 3d e4 00 01:28:44.600 READ DMA
c8 00 08 98 4f 3d e4 00 01:28:44.600 READ DMA

Error 207 occurred at disk power-on lifetime: 462 hours (19 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 b8 b8 4f 3d e4 Error: UNC 184 sectors at LBA = 0x043d4fb8 = 71126968

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 70 4f 3d e4 00 01:28:40.400 READ DMA
c8 00 00 70 4e 3d e4 00 01:28:40.200 READ DMA
c8 00 00 70 4d 3d e4 00 01:28:40.000 READ DMA
c8 00 00 70 4c 3d e4 00 01:28:39.700 READ DMA
c8 00 00 70 4b 3d e4 00 01:28:39.500 READ DMA

Error 206 occurred at disk power-on lifetime: 462 hours (19 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 b8 4f 3d e4 Error: UNC 8 sectors at LBA = 0x043d4fb8 = 71126968

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 b8 4f 3d e4 00 00:38:04.600 READ DMA
27 00 00 00 00 00 e0 00 00:38:04.600 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 02 00:38:04.600 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 00:38:04.600 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:38:04.600 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 205 occurred at disk power-on lifetime: 462 hours (19 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 b8 4f 3d e4 Error: UNC 8 sectors at LBA = 0x043d4fb8 = 71126968

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 b8 4f 3d e4 00 00:38:00.700 READ DMA
c8 00 08 b0 4f 3d e4 00 00:38:00.700 READ DMA
c8 00 08 a8 4f 3d e4 00 00:38:00.700 READ DMA
c8 00 08 a0 4f 3d e4 00 00:38:00.700 READ DMA
c8 00 08 98 4f 3d e4 00 00:38:00.700 READ DMA

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7703 -
# 2 Short offline Completed without error 00% 7703 -

Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


[Learner]

Συμφορουμίτες εκανα κ εγω το τεστ στον σκληρο μου δισκο που τον εχω 10 χρονια !

Μπορεί να τον έχεις 10 χρόνια, αλλά αυτό που έχει σημασία είναι πόσες ώρες λειτουργίας έχει ο δίσκος. Όχι πόσα χρόνια τον έχεις. Εδώ βλέπω μόλις 962 ώρες λειτουργίας = 40 μέρες(περίπου) λειτουργίας μόνο; WTF ; Τον ανοίγεις καθόλου τον υπολογιστή;
εκτός και αν γράφει λάθος τιμή το SMART ή εάν λόγω Hitachi πρέπει να κάνουμε τίποτα μετατροπές για να βρούμε τις σωστές ώρες λειτουργίας.

Ο δίσκος, από τα αποτελέσματα που παραθέτεις είναι μια χαρά. Το μόνο που πρέπει να μας ανησυχεί είναι αυτή η τιμή

Κώδικας: Επιλογή όλων

196 Reallocated_Event_Count 0x0032 091 091 000 Old_age Always - 669

Επίσης, το backup πάντα είναι καλό. Είτε ο δίσκος είναι για πέταμα, είτε όχι.

[Logan]

Εγώ τον έχω ένα χρόνο και είναι power on 4968 ώρες! Τουτέστιν 207 μέρες.
Να και το δικό μου :

Κώδικας: Επιλογή όλων


=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus SpinPoint M8 (AF)
Device Model: ST500LM012 HN-M500MBB
Serial Number: S2RSJ9DD440207
LU WWN Device Id: 5 0004cf 20a38f1e7
Firmware Version: 2AR10002
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Sep 28 15:31:06 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6540) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 109) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 7
2 Throughput_Performance 0x0026 056 056 000 Old_age Always - 5957
3 Spin_Up_Time 0x0023 091 091 025 Pre-fail Always - 2854
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1923
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 4968
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 84
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1770
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 55
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 058 039 000 Old_age Always - 42 (Min/Max 15/61)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 4900
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 84
225 Load_Cycle_Count 0x0032 087 087 000 Old_age Always - 134538

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 3344 -
# 2 Extended offline Aborted by host 80% 3265 -
# 3 Short offline Aborted by host 90% 2449 -
# 4 Short offline Completed without error 00% 2380 -
# 5 Short offline Completed without error 00% 2294 -
# 6 Short offline Completed without error 00% 2077 -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


[Reinach]

Παιδιά, κάντε έναν κόπο και για τον δικό μου:

Κώδικας: Επιλογή όλων

sudo smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-37-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K250
Device Model: Hitachi HTS542525K9SA00
Serial Number: 080524BB6F00WDJBX7BF
LU WWN Device Id: 5 000cca 533e19917
Firmware Version: BBFOC33P
User Capacity: 250.059.350.016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 3f
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Sun Sep 28 17:53:30 2014 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 107) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 250 250 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 097 097 000 Old_age Always - 5448
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 069 069 000 Old_age Always - 13652
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 5315
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 90
193 Load_Cycle_Count 0x0012 096 096 000 Old_age Always - 42036
194 Temperature_Celsius 0x0002 152 152 000 Old_age Always - 36 (Min/Max 12/50)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 5
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 10068 -
# 2 Short offline Completed without error 00% 0 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.