Πρόβλημα με ασύρματη usb Belkin

...κάρτες δικτύου, modems, προβλήματα internet
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα των εντολών στο τερματικό :
lspci -nn
lsusb
rfkill list

Πρόβλημα με ασύρματη usb Belkin

Δημοσίευσηαπό dim459 » 06 Αύγ 2018, 21:24

Δεν είμαι σίγουρος αν δημοσιεύεται στη σωστή κατηγορία, μιας και όταν ενεργοποιηθεί η κάρτα λειτουργεί κανονικά, οπότε, αν κριθεί ότι πρέπει, ας μετακινηθεί.
Λοιπόν στον υπολογιστή μου (Kubuntu 16.04 64bit) υπάρχει μια παλιά (τουλάχιστον δεκαετίας) ασύρματη usb κάρτα της Belkin, η οποία εδώ και χρόνια λειτουργεί κανονικότατα και συγκεκριμένα η :
Κώδικας: Επιλογή όλων
ID 050d:705a Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2571W]

Εδώ και μερικές μέρες, όταν ανοίγει ο υπολογιστής τις περισσότερες φορές η κάρτα δεν ενεργοποιείται, χρειάζεται να την βγάλω και να την ξαναβάλω στην θύρα usb για να λειτουργήσει. Η αλλαγή θύρας δεν έχει κάποιο αποτέλεσμα.
Εξυπακούεται ότι το παραπάνω αποτέλεσμα της lsusb προέρχεται μόνο όταν ενεργοποιηθεί η κάρτα, αλλιώς δεν την εμφανίζει και στην σχετική εντολή.
Θα ποστάρω δύο dmesg, το πρώτο όταν ανοίξει ο υπολογιστής και δεν έχει ενεργοποιηθεί η κάρτα, το δεύτερο όταν έχει λειτουργήσει, αφού βγάλω και ξαναβάλω την κάρτα.
Θέλω να διευκρινίσω ότι στο πρώτο η κάρτα αναγράφεται (δεν έβγαινε όμως και στην lsusb) αλλά υπήρξε και αντίστοιχο dmesg (δυστυχώς δεν το έσωσα) στο οποίο δεν την ανέφερε καθόλου.
Παρατηρείτε κάτι που δεν πάει καλά ή απλά η κάρτα έχει αρχίσει και παραδίδει το πνεύμα ;
Κώδικας: Επιλογή όλων
dimitris@dimitris-H110M-DS2:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0xc2, date = 2017-11-16
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x507 with crng_init=0
[    0.000000] Linux version 4.13.0-45-generic (buildd@lgw01-amd64-011) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #50~16.04.1-Ubunt
u SMP Wed May 30 11:18:27 UTC 2018 (Ubuntu 4.13.0-45.50~16.04.1-generic 4.13.16)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-45-generic.efi.signed root=UUID=a845013a-99c1-466e-ad97-bcca3cc51e4d ro quiet splash vt.h
andoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7a03fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b7a04000-0x00000000b7a04fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b7a05000-0x00000000b7a05fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b7a06000-0x00000000be53ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be540000-0x00000000be86efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000be86f000-0x00000000be9dcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be9dd000-0x00000000bf08bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf08c000-0x00000000bf7a2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf7a3000-0x00000000bf7fefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0xbecdd000  ACPI=0xbecdd000  SMBIOS=0xbf6ce000  SMBIOS 3.0=0xbf6cd000  MPS=0xfc9f0  ESRT=0xbd258918  
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. H110M-DS2/H110M-DS2-CF, BIOS F21 06/09/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT   
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc70-0x000fcc7f] mapped at [ffff8b73800fcc70]
[    0.000000] esrt: Reserving ESRT space from 0x00000000bd258918 to 0x00000000bd258950.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff8b7380095000] 95000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x2bd2c000, 0x2bd2cfff] PGTABLE
[    0.000000] BRK [0x2bd2d000, 0x2bd2dfff] PGTABLE
[    0.000000] BRK [0x2bd2e000, 0x2bd2efff] PGTABLE
[    0.000000] BRK [0x2bd2f000, 0x2bd2ffff] PGTABLE
[    0.000000] BRK [0x2bd30000, 0x2bd30fff] PGTABLE
[    0.000000] BRK [0x2bd31000, 0x2bd31fff] PGTABLE
[    0.000000] BRK [0x2bd32000, 0x2bd32fff] PGTABLE
[    0.000000] BRK [0x2bd33000, 0x2bd33fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x32080000-0x35037fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000BECDD000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BECDD0A0 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BED05690 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BECDD200 02848C (v02 ALASKA A M I    01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x00000000BF08BC40 000040
[    0.000000] ACPI: APIC 0x00000000BED057A8 000068 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000BED05810 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BED05858 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: FIDT 0x00000000BED05898 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BED05938 003154 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x00000000BED08A90 002544 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.000000] ACPI: HPET 0x00000000BED0AFD8 000038 (v01 INTEL  SKL      00000001 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000BED0B010 000E3B (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x00000000BED0BE50 002AD7 (v02 INTEL  xh_rvp10 00000000 INTL 20160422)
[    0.000000] ACPI: UEFI 0x00000000BED0E928 000042 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: SSDT 0x00000000BED0E970 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x00000000BED0F850 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: WSMT 0x00000000BED0F8E8 000028 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000BED0F910 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x00000000BED0FBB0 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x00000000BED12BB8 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x00000000BED12BF0 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: BGRT 0x00000000BED12C48 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DMAR 0x00000000BED12C80 000070 (v01 INTEL  SKL      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13efd3000-0x13effdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b7a03fff]
[    0.000000]   node   0: [mem 0x00000000b7a06000-0x00000000be53ffff]
[    0.000000]   node   0: [mem 0x00000000be86f000-0x00000000be9dcfff]
[    0.000000]   node   0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[    0.000000] On node 0 totalpages: 1037898
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 27 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12123 pages used for memmap
[    0.000000]   DMA32 zone: 775853 pages, LIFO batch:31
[    0.000000]   Normal zone: 4032 pages used for memmap
[    0.000000]   Normal zone: 258048 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7a04000-0xb7a04fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7a05000-0xb7a05fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe540000-0xbe86efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe9dd000-0xbf08bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf08c000-0xbf7a2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7a3000-0xbf7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff8b74bec00000 s146584 r8192 d29544 u1048576
[    0.000000] pcpu-alloc: s146584 r8192 d29544 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1  
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1021652
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-45-generic.efi.signed root=UUID=a845013a-99c1-466e-ad97-bcca3cc51e4d ro quiet spla
sh vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3814568K/4151592K available (12300K kernel code, 2481K rwdata, 4012K rodata, 2368K init, 2372K bss, 337024K reserved, 0K cma-re
served)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37875 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 524544, nr_irqs: 512, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.004000] tsc: Detected 3300.000 MHz processor
[    0.004000] tsc: Detected 3312.000 MHz TSC
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.00 BogoMIPS (lpj=13248000)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.030146] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.030731] Security Framework initialized
[    0.030732] Yama: becoming mindful.
[    0.030744] AppArmor: AppArmor initialized
[    0.031409] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.031741] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.031755] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.031766] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.031900] CPU: Physical Processor ID: 0
[    0.031900] CPU: Processor Core ID: 0
[    0.031904] FEATURE SPEC_CTRL Present
[    0.031906] mce: CPU supports 8 MCE banks
[    0.031913] CPU0: Thermal monitoring enabled (TM1)
[    0.031924] process: using mwait in idle threads
[    0.031925] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.031926] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.031927] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.031928] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
[    0.031928] Spectre V2 mitigation: Retpoline compiled kernel.  Defaulting IBRS to disabled
[    0.031928] Spectre V2 mitigation: Filling RSB on context switch
[    0.031929] Speculative Store Bypass: Vulnerable
[    0.032022] Freeing SMP alternatives memory: 36K
[    0.036584] smpboot: Max logical packages: 1
[    0.036588] DMAR: Host address width 39
[    0.036589] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.036594] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.036595] DMAR: RMRR base: 0x000000be7fd000 end: 0x000000be81cfff
[    0.036597] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed90000 IOMMU 0
[    0.036597] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.036598] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.037934] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.037935] x2apic enabled
[    0.037945] Switched APIC routing to cluster x2apic.
[    0.041916] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.081635] TSC deadline timer enabled
[    0.081640] smpboot: CPU0: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.081685] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.081707] ... version:                4
[    0.081707] ... bit width:              48
[    0.081707] ... generic registers:      8
[    0.081708] ... value mask:             0000ffffffffffff
[    0.081708] ... max period:             00007fffffffffff
[    0.081709] ... fixed-purpose events:   3
[    0.081709] ... event mask:             00000007000000ff
[    0.081739] Hierarchical SRCU implementation.
[    0.082300] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.082310] smp: Bringing up secondary CPUs ...
[    0.082357] x86: Booting SMP configuration:
[    0.082358] .... node  #0, CPUs:      #1
[    0.083569] smp: Brought up 1 node, 2 CPUs
[    0.083569] smpboot: Total of 2 processors activated (13248.00 BogoMIPS)
[    0.083569] devtmpfs: initialized
[    0.083569] x86/mm: Memory block size: 128MB
[    0.083569] evm: security.selinux
[    0.083569] evm: security.SMACK64
[    0.083569] evm: security.SMACK64EXEC
[    0.083569] evm: security.SMACK64TRANSMUTE
[    0.083569] evm: security.SMACK64MMAP
[    0.083569] evm: security.ima
[    0.083569] evm: security.capability
[    0.083569] PM: Registering ACPI NVS region [mem 0xb7a04000-0xb7a04fff] (4096 bytes)
[    0.083569] PM: Registering ACPI NVS region [mem 0xbe9dd000-0xbf08bfff] (7008256 bytes)
[    0.083569] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.083569] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.083569] pinctrl core: initialized pinctrl subsystem
[    0.083569] RTC time: 12:01:28, date: 08/06/18
[    0.083569] NET: Registered protocol family 16
[    0.084006] cpuidle: using governor ladder
[    0.084006] cpuidle: using governor menu
[    0.084006] PCCT header not found.
[    0.084029] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.084030] ACPI: bus type PCI registered
[    0.084031] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.084073] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.084075] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.084080] PCI: Using configuration type 1 for base access
[    0.084693] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.084693] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.084693] ACPI: Added _OSI(Module Device)
[    0.084693] ACPI: Added _OSI(Processor Device)
[    0.084693] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.084693] ACPI: Added _OSI(Processor Aggregator Device)
[    0.084875] ACPI: Executed 35 blocks of module-level executable AML code
[    0.094324] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.097218] ACPI: Dynamic OEM Table Load:
[    0.097227] ACPI: SSDT 0xFFFF8B74B97BE800 0006D5 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.097393] ACPI: Executed 1 blocks of module-level executable AML code
[    0.097442] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.098455] ACPI: Dynamic OEM Table Load:
[    0.098458] ACPI: SSDT 0xFFFF8B74B905A000 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.098613] ACPI: Executed 1 blocks of module-level executable AML code
[    0.098908] ACPI: Dynamic OEM Table Load:
[    0.098912] ACPI: SSDT 0xFFFF8B74B97B8000 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.099220] ACPI: Executed 1 blocks of module-level executable AML code
[    0.099360] ACPI: Dynamic OEM Table Load:
[    0.099363] ACPI: SSDT 0xFFFF8B74B97C8200 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.099517] ACPI: Executed 1 blocks of module-level executable AML code
[    0.101022] ACPI: Interpreter enabled
[    0.101053] ACPI: (supports S0 S3 S4 S5)
[    0.101054] ACPI: Using IOAPIC for interrupt routing
[    0.101083] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.101834] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.103722] ACPI: Power Resource [PG00] (on)
[    0.104004] ACPI: Power Resource [PG01] (on)
[    0.104276] ACPI: Power Resource [PG02] (on)
[    0.106856] ACPI: Power Resource [WRST] (on)
[    0.107104] ACPI: Power Resource [WRST] (on)
[    0.107348] ACPI: Power Resource [WRST] (on)
[    0.107592] ACPI: Power Resource [WRST] (on)
[    0.107837] ACPI: Power Resource [WRST] (on)
[    0.108084] ACPI: Power Resource [WRST] (on)
[    0.108326] ACPI: Power Resource [WRST] (on)
[    0.108571] ACPI: Power Resource [WRST] (on)
[    0.108813] ACPI: Power Resource [WRST] (on)
[    0.109060] ACPI: Power Resource [WRST] (on)
[    0.109323] ACPI: Power Resource [WRST] (on)
[    0.109568] ACPI: Power Resource [WRST] (on)
[    0.109813] ACPI: Power Resource [WRST] (on)
[    0.110057] ACPI: Power Resource [WRST] (on)
[    0.110300] ACPI: Power Resource [WRST] (on)
[    0.110544] ACPI: Power Resource [WRST] (on)
[    0.110787] ACPI: Power Resource [WRST] (on)
[    0.111715] ACPI: Power Resource [WRST] (on)
[    0.111962] ACPI: Power Resource [WRST] (on)
[    0.112213] ACPI: Power Resource [WRST] (on)
[    0.123071] ACPI: Power Resource [FN00] (off)
[    0.123131] ACPI: Power Resource [FN01] (off)
[    0.123190] ACPI: Power Resource [FN02] (off)
[    0.123250] ACPI: Power Resource [FN03] (off)
[    0.123310] ACPI: Power Resource [FN04] (off)
[    0.124234] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.124239] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.124263] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.124788] PCI host bridge to bus 0000:00
[    0.124790] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.124791] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.124792] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.124793] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff window]
[    0.124794] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.124795] pci_bus 0000:00: root bus resource [bus 00-7e]
[    0.124801] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
[    0.125052] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.125084] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.125277] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.125297] pci 0000:00:14.0: reg 0x10: [mem 0xeff10000-0xeff1ffff 64bit]
[    0.125360] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.125526] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.125550] pci 0000:00:16.0: reg 0x10: [mem 0xeff2d000-0xeff2dfff 64bit]
[    0.125613] pci 0000:00:16.0: PME# supported from D3hot
[    0.125733] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.125750] pci 0000:00:17.0: reg 0x10: [mem 0xeff28000-0xeff29fff]
[    0.125757] pci 0000:00:17.0: reg 0x14: [mem 0xeff2c000-0xeff2c0ff]
[    0.125763] pci 0000:00:17.0: reg 0x18: [io  0xf050-0xf057]
[    0.125770] pci 0000:00:17.0: reg 0x1c: [io  0xf040-0xf043]
[    0.125776] pci 0000:00:17.0: reg 0x20: [io  0xf020-0xf03f]
[    0.125783] pci 0000:00:17.0: reg 0x24: [mem 0xeff2b000-0xeff2b7ff]
[    0.125819] pci 0000:00:17.0: PME# supported from D3hot
[    0.125926] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[    0.125986] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.126116] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
[    0.126175] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.126292] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
[    0.126351] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.126466] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
[    0.126524] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.126640] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.126706] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.126824] pci 0000:00:1d.1: [8086:a119] type 01 class 0x060400
[    0.126889] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
[    0.127028] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
[    0.127226] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.127239] pci 0000:00:1f.2: reg 0x10: [mem 0xeff24000-0xeff27fff]
[    0.127372] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.127397] pci 0000:00:1f.3: reg 0x10: [mem 0xeff20000-0xeff23fff 64bit]
[    0.127421] pci 0000:00:1f.3: reg 0x20: [mem 0xeff00000-0xeff0ffff 64bit]
[    0.127466] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.127615] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.127675] pci 0000:00:1f.4: reg 0x10: [mem 0xeff2a000-0xeff2a0ff 64bit]
[    0.127743] pci 0000:00:1f.4: reg 0x20: [io  0xf000-0xf01f]
[    0.127936] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
[    0.127955] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.127964] pci 0000:01:00.0: reg 0x18: [mem 0xefe20000-0xefe3ffff 64bit]
[    0.127970] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.127981] pci 0000:01:00.0: reg 0x30: [mem 0xefe00000-0xefe1ffff pref]
[    0.127994] pci 0000:01:00.0: BAR 0: assigned to efifb
[    0.128023] pci 0000:01:00.0: supports D1 D2
[    0.128063] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
[    0.128081] pci 0000:01:00.1: reg 0x10: [mem 0xefe40000-0xefe43fff 64bit]
[    0.128146] pci 0000:01:00.1: supports D1 D2
[    0.140032] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.140039] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.140045] pci 0000:00:01.0:   bridge window [mem 0xefe00000-0xefefffff]
[    0.140066] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.140155] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.140182] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.140207] pci 0000:02:00.0: reg 0x18: [mem 0xefd00000-0xefd00fff 64bit]
[    0.140222] pci 0000:02:00.0: reg 0x20: [mem 0xe0000000-0xe0003fff 64bit pref]
[    0.140310] pci 0000:02:00.0: supports D1 D2
[    0.140311] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.140414] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.140416] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.140419] pci 0000:00:1c.0:   bridge window [mem 0xefd00000-0xefdfffff]
[    0.140422] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.140489] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.140571] pci 0000:04:00.0: [1106:3483] type 00 class 0x0c0330
[    0.140595] pci 0000:04:00.0: reg 0x10: [mem 0xefc00000-0xefc00fff 64bit]
[    0.140679] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.140751] pci 0000:00:1c.6: PCI bridge to [bus 04]
[    0.140755] pci 0000:00:1c.6:   bridge window [mem 0xefc00000-0xefcfffff]
[    0.140824] pci 0000:00:1c.7: PCI bridge to [bus 05]
[    0.140896] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.140969] pci 0000:00:1d.1: PCI bridge to [bus 07]
[    0.142715] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142754] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.142791] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142827] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142863] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142899] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142937] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142973] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.143506] SCSI subsystem initialized
[    0.143529] libata version 3.00 loaded.
[    0.143529] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.143529] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.143529] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.143529] vgaarb: loaded
[    0.143529] ACPI: bus type USB registered
[    0.143529] usbcore: registered new interface driver usbfs
[    0.143529] usbcore: registered new interface driver hub
[    0.143529] usbcore: registered new device driver usb
[    0.143529] EDAC MC: Ver: 3.0.0
[    0.143529] Registered efivars operations
[    0.161665] PCI: Using ACPI for IRQ routing
[    0.174962] PCI: pci_cache_line_size set to 64 bytes
[    0.175007] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.175008] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.175009] e820: reserve RAM buffer [mem 0xb7a04000-0xb7ffffff]
[    0.175009] e820: reserve RAM buffer [mem 0xbe540000-0xbfffffff]
[    0.175010] e820: reserve RAM buffer [mem 0xbe9dd000-0xbfffffff]
[    0.175011] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.175012] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[    0.175064] NetLabel: Initializing
[    0.175065] NetLabel:  domain hash size = 128
[    0.175065] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.175074] NetLabel:  unlabeled traffic allowed by default
[    0.175082] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.175082] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.177025] clocksource: Switched to clocksource hpet
[    0.182525] VFS: Disk quotas dquot_6.6.0
[    0.182536] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.182599] AppArmor: AppArmor Filesystem Enabled
[    0.182623] pnp: PnP ACPI init
[    0.182853] system 00:00: [io  0x0a00-0x0a2f] has been reserved
[    0.182855] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.182856] system 00:00: [io  0x0a40-0x0a4f] has been reserved
[    0.182858] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.183212] pnp 00:01: [dma 0 disabled]
[    0.183317] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.183623] pnp 00:02: [dma 0 disabled]
[    0.183651] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.183750] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.183753] system 00:03: [io  0xffff] has been reserved
[    0.183755] system 00:03: [io  0xffff] has been reserved
[    0.183756] system 00:03: [io  0xffff] has been reserved
[    0.183757] system 00:03: [io  0x1800-0x18fe] has been reserved
[    0.183758] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.183759] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.183826] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.183827] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.183839] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.183865] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.183866] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.184058] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.184059] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.184060] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.184061] system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.184062] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.184064] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.184065] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.184066] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.184067] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.184068] system 00:07: [mem 0xeffe0000-0xefffffff] has been reserved
[    0.184070] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.184098] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.184099] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.184100] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.184101] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.184102] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.184103] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.184105] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.184106] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.184331] system 00:09: [io  0xff00-0xfffe] has been reserved
[    0.184332] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185180] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.185181] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.185182] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.185183] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185816] pnp: PnP ACPI: found 11 devices
[    0.193369] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.193406] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.193407] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.193410] pci 0000:00:01.0:   bridge window [mem 0xefe00000-0xefefffff]
[    0.193411] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.193414] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.193416] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.193418] pci 0000:00:1c.0:   bridge window [mem 0xefd00000-0xefdfffff]
[    0.193421] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.193424] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.193432] pci 0000:00:1c.6: PCI bridge to [bus 04]
[    0.193434] pci 0000:00:1c.6:   bridge window [mem 0xefc00000-0xefcfffff]
[    0.193439] pci 0000:00:1c.7: PCI bridge to [bus 05]
[    0.193446] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.193454] pci 0000:00:1d.1: PCI bridge to [bus 07]
[    0.193462] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.193463] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.193465] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.193466] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xefffffff window]
[    0.193467] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.193467] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.193468] pci_bus 0000:01: resource 1 [mem 0xefe00000-0xefefffff]
[    0.193469] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.193471] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.193471] pci_bus 0000:02: resource 1 [mem 0xefd00000-0xefdfffff]
[    0.193472] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.193473] pci_bus 0000:04: resource 1 [mem 0xefc00000-0xefcfffff]
[    0.193578] NET: Registered protocol family 2
[    0.193669] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.193719] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.193793] TCP: Hash tables configured (established 32768 bind 32768)
[    0.193814] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.193826] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.193855] NET: Registered protocol family 1
[    0.194623] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.194775] PCI: CLS 64 bytes, default 64
[    0.194802] Unpacking initramfs...
[    0.724361] Freeing initrd memory: 48864K
[    0.724436] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.724438] software IO TLB [mem 0xb24d6000-0xb64d6000] (64MB) mapped at [ffff8b74324d6000-ffff8b74364d5fff]
[    0.724556] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd93f9e57, max_idle_ns: 440795263784 ns
[    0.724613] Scanning for low memory corruption every 60 seconds
[    0.724856] audit: initializing netlink subsys (disabled)
[    0.724903] audit: type=2000 audit(1533556887.724:1): state=initialized audit_enabled=0 res=1
[    0.725141] Initialise system trusted keyrings
[    0.725148] Key type blacklist registered
[    0.725186] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.725885] zbud: loaded
[    0.726223] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.726325] fuse init (API version 7.26)
[    0.728567] Key type asymmetric registered
[    0.728568] Asymmetric key parser 'x509' registered
[    0.728586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.728625] io scheduler noop registered
[    0.728625] io scheduler deadline registered
[    0.728640] io scheduler cfq registered (default)
[    0.729438] efifb: probing for efifb
[    0.729446] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
[    0.729447] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.729447] efifb: scrolling: redraw
[    0.729448] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.729509] Console: switching to colour frame buffer device 128x48
[    0.729518] fb0: EFI VGA frame buffer device
[    0.729522] intel_idle: MWAIT substates: 0x142120
[    0.729522] intel_idle: v0.4.1 model 0x5E
[    0.729587] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.729686] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.729695] ACPI: Sleep Button [SLPB]
[    0.729714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.729721] ACPI: Power Button [PWRB]
[    0.729741] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.729789] ACPI: Power Button [PWRF]
[    0.788736] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.848451] thermal LNXTHERM:00: registered as thermal_zone0
[    0.848452] ACPI: Thermal Zone [TZ00] (28 C)
[    0.848570] thermal LNXTHERM:01: registered as thermal_zone1
[    0.848571] ACPI: Thermal Zone [TZ01] (30 C)
[    0.848620] GHES: HEST is not enabled!
[    0.848701] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.869542] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.872135] Linux agpgart interface v0.103
[    0.873172] loop: module loaded
[    0.873267] libphy: Fixed MDIO Bus: probed
[    0.873267] tun: Universal TUN/TAP device driver, 1.6
[    0.873316] PPP generic driver version 2.4.2
[    0.873370] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.873371] ehci-pci: EHCI PCI platform driver
[    0.873377] ehci-platform: EHCI generic platform driver
[    0.873382] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.873383] ohci-pci: OHCI PCI platform driver
[    0.873388] ohci-platform: OHCI generic platform driver
[    0.873391] uhci_hcd: USB Universal Host Controller Interface driver
[    0.873521] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.873525] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.874611] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.874615] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.874686] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.874687] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.874688] usb usb1: Product: xHCI Host Controller
[    0.874689] usb usb1: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    0.874690] usb usb1: SerialNumber: 0000:00:14.0
[    0.874779] hub 1-0:1.0: USB hub found
[    0.874790] hub 1-0:1.0: 10 ports detected
[    0.875476] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.875478] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.875501] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.875502] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.875503] usb usb2: Product: xHCI Host Controller
[    0.875504] usb usb2: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    0.875505] usb usb2: SerialNumber: 0000:00:14.0
[    0.875586] hub 2-0:1.0: USB hub found
[    0.875593] hub 2-0:1.0: 4 ports detected
[    0.876201] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.876204] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.876299] xhci_hcd 0000:04:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
[    0.876376] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.876377] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.876378] usb usb3: Product: xHCI Host Controller
[    0.876379] usb usb3: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    0.876380] usb usb3: SerialNumber: 0000:04:00.0
[    0.876499] hub 3-0:1.0: USB hub found
[    0.876505] hub 3-0:1.0: 1 port detected
[    0.876545] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.876547] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.876557] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.876567] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.876568] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.876569] usb usb4: Product: xHCI Host Controller
[    0.876570] usb usb4: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    0.876571] usb usb4: SerialNumber: 0000:04:00.0
[    0.876679] hub 4-0:1.0: USB hub found
[    0.876685] hub 4-0:1.0: 4 ports detected
[    0.876769] i8042: PNP: No PS/2 controller found.
[    0.877019] mousedev: PS/2 mouse device common for all mice
[    0.877355] rtc_cmos 00:05: RTC can wake from S4
[    0.877731] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.877812] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.877815] i2c /dev entries driver
[    0.877850] device-mapper: uevent: version 1.0.3
[    0.877882] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.877884] intel_pstate: Intel P-state driver initializing
[    0.878017] intel_pstate: HWP enabled
[    0.878050] ledtrig-cpu: registered to indicate activity on CPUs
[    0.878052] EFI Variables Facility v0.08 2004-May-17
[    0.899867] NET: Registered protocol family 10
[    0.903548] Segment Routing with IPv6
[    0.903562] NET: Registered protocol family 17
[    0.903568] Key type dns_resolver registered
[    0.903723] RAS: Correctable Errors collector initialized.
[    0.903744] microcode: sig=0x506e3, pf=0x2, revision=0xc2
[    0.903800] microcode: Microcode Update Driver: v2.2.
[    0.903891] sched_clock: Marking stable (903798113, 0)->(903508030, 290083)
[    0.904160] registered taskstats version 1
[    0.904168] Loading compiled-in X.509 certificates
[    0.906190] Loaded X.509 cert 'Build time autogenerated kernel key: fec222083a1a40f2051f2b073ec28e5cb659a232'
[    0.906666] Couldn't get size: 0x800000000000000e
[    0.906668] MODSIGN: Couldn't get UEFI db list
[    0.908986] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary
sys keyring
[    0.909224] Couldn't get size: 0x800000000000000e
[    0.909225] MODSIGN: Couldn't get UEFI dbx list
[    0.909238] zswap: loaded using pool lzo/zbud
[    0.912510] Key type big_key registered
[    0.912512] Key type trusted registered
[    0.914042] Key type encrypted registered
[    0.914045] AppArmor: AppArmor sha1 policy hashing enabled
[    0.914047] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.914059] evm: HMAC attrs: 0x1
[    0.914931]   Magic number: 14:694:25
[    0.915122] rtc_cmos 00:05: setting system clock to 2018-08-06 12:01:28 UTC (1533556888)
[    0.915168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.915168] EDD information not available.
[    0.915196] PM: Hibernation image not present or could not be loaded.
[    0.916537] Freeing unused kernel memory: 2368K
[    0.936312] Write protecting the kernel read-only data: 18432k
[    0.936673] Freeing unused kernel memory: 2024K
[    0.936858] Freeing unused kernel memory: 84K
[    0.938134] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.938135] x86/mm: Checking user space page tables
[    0.939344] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.990378] hidraw: raw HID events driver (C) Jiri Kosina
[    1.033395] ahci 0000:00:17.0: version 3.0
[    1.035275] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.035279] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.043810] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    1.043812] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst  
[    1.044877] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffff9b104068d000, e0:d5:5e:13:fd:c1, XID 0c000800 IRQ 124
[    1.044878] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.045825] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.058151] [drm] radeon kernel modesetting enabled.
[    1.059814] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.059814] AMD IOMMUv2 functionality not available on this system
[    1.062046] CRAT table not found
[    1.062047] Finished initializing topology ret=0
[    1.062053] kfd kfd: Initialized module
[    1.062180] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    1.062181] fb: switching to radeondrmfb from EFI VGA
[    1.062197] Console: switching to colour dummy device 80x25
[    1.062400] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1043:0x03DA 0x00).
[    1.062453] ATOM BIOS: 6779.13.12.0.0.AS02
[    1.062950] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.062951] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    1.062953] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.062954] [drm] RAM width 64bits DDR
[    1.062987] [TTM] Zone  kernel: Available graphics memory: 1998878 kiB
[    1.062988] [TTM] Initializing pool allocator
[    1.062990] [TTM] Initializing DMA pool allocator
[    1.063005] [drm] radeon: 1024M of VRAM memory ready
[    1.063005] [drm] radeon: 1024M of GTT memory ready.
[    1.063010] [drm] Loading CAICOS Microcode
[    1.063058] [drm] Internal thermal controller without fan control
[    1.067316] [drm] radeon: dpm initialized
[    1.067366] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.067855] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    1.080954] scsi host0: ahci
[    1.081125] scsi host1: ahci
[    1.081282] scsi host2: ahci
[    1.081436] scsi host3: ahci
[    1.081460] ata1: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b100 irq 123
[    1.081461] ata2: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b180 irq 123
[    1.081463] ata3: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b200 irq 123
[    1.081465] ata4: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b280 irq 123
[    1.088146] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[    1.088252] radeon 0000:01:00.0: WB enabled
[    1.088254] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8b74aea9cc00
[    1.088255] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8b74aea9cc0c
[    1.088998] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffff9b1041032118
[    1.088999] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.088999] [drm] Driver supports precise vblank timestamp query.
[    1.089000] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.089030] radeon 0000:01:00.0: radeon: using MSI.
[    1.089050] [drm] radeon: irq initialized.
[    1.105440] [drm] ring test on 0 succeeded in 3 usecs
[    1.105449] [drm] ring test on 3 succeeded in 6 usecs
[    1.200059] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    1.204049] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.281139] [drm] ring test on 5 succeeded in 2 usecs
[    1.281147] [drm] UVD initialized successfully.
[    1.281335] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.281449] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.341316] usb 1-3: New USB device found, idVendor=03f0, idProduct=3d17
[    1.341317] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.341318] usb 1-3: Product: HP LaserJet P1005
[    1.341319] usb 1-3: Manufacturer: Hewlett-Packard
[    1.341320] usb 1-3: SerialNumber: BC1GKXP
[    1.346270] usb 3-1: New USB device found, idVendor=2109, idProduct=3431
[    1.346271] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.346272] usb 3-1: Product: USB2.0 Hub
[    1.346692] hub 3-1:1.0: USB hub found
[    1.346982] hub 3-1:1.0: 4 ports detected
[    1.395189] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.395205] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.395218] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.395231] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.396115] ata3.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133
[    1.396116] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.396179] ata1.00: ATA-8: ST3500312CS, SS16, max UDMA/133
[    1.396180] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.396323] ata4.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
[    1.397079] ata3.00: configured for UDMA/133
[    1.397321] ata1.00: configured for UDMA/133
[    1.397472] scsi 0:0:0:0: Direct-Access     ATA      ST3500312CS      SS16 PQ: 0 ANSI: 5
[    1.397751] ata4.00: configured for UDMA/133
[    1.423797] ata2.00: ATA-8: ST3320613AS, SD22, max UDMA/133
[    1.423798] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.460120] usb 1-6: new low-speed USB device number 3 using xhci_hcd
[    1.464429] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.464435] sd 0:0:0:0: [sda] Write Protect is off
[    1.464437] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.464443] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.464690] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.465832] ata2.00: configured for UDMA/133
[    1.466165] scsi 1:0:0:0: Direct-Access     ATA      ST3320613AS      SD22 PQ: 0 ANSI: 5
[    1.496470] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.496528] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.496539] sd 1:0:0:0: [sdb] Write Protect is off
[    1.496540] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.496562] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.496658] scsi 2:0:0:0: Direct-Access     ATA      ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5
[    1.517076]  sda: sda1 sda2 sda3 sda4
[    1.517865] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.520447]  sdb: sdb1
[    1.520975] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.532408] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.532453] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.532455] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[    1.532466] sd 2:0:0:0: [sdc] Write Protect is off
[    1.532467] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.532488] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.533291] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24D5MT       1.00 PQ: 0 ANSI: 5
[    1.559425] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.559426] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.559512] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.559564] sr 3:0:0:0: Attached scsi generic sg3 type 5
[    1.579356]  sdc: sdc1
[    1.579921] sd 2:0:0:0: [sdc] Attached SCSI disk
[    1.605417] usb 1-6: New USB device found, idVendor=1c4f, idProduct=0002
[    1.605419] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.605420] usb 1-6: Product: USB Keyboard
[    1.605421] usb 1-6: Manufacturer: SIGMACHIP
[    1.611913] usbcore: registered new interface driver usbhid
[    1.611914] usbhid: USB HID core driver
[    1.612899] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1C4F:0002.0001/input/input3
[    1.672172] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-6/input0
[    1.672286] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:1C4F:0002.0002/input/input4
[    1.724029] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[    1.732137] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-6/input1
[    1.756104] clocksource: Switched to clocksource tsc
[    1.948080] [drm] ib test on ring 5 succeeded
[    1.948555] [drm] Radeon Display Connectors
[    1.948556] [drm] Connector 0:
[    1.948556] [drm]   HDMI-A-1
[    1.948556] [drm]   HPD1
[    1.948558] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    1.948558] [drm]   Encoders:
[    1.948558] [drm]     DFP1: INTERNAL_UNIPHY1
[    1.948559] [drm] Connector 1:
[    1.948559] [drm]   DVI-D-1
[    1.948560] [drm]   HPD4
[    1.948560] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[    1.948561] [drm]   Encoders:
[    1.948561] [drm]     DFP2: INTERNAL_UNIPHY
[    1.948561] [drm] Connector 2:
[    1.948562] [drm]   VGA-1
[    1.948563] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    1.948563] [drm]   Encoders:
[    1.948563] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.002530] [drm] fb mappable at 0xD0363000
[    2.002531] [drm] vram apper at 0xD0000000
[    2.002531] [drm] size 5242880
[    2.002531] [drm] fb depth is 24
[    2.002532] [drm]    pitch is 5120
[    2.002593] fbcon: radeondrmfb (fb0) is primary device
[    2.002631] Console: switching to colour frame buffer device 160x64
[    2.002646] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.016378] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[    2.036208] usb 1-7: New USB device found, idVendor=050d, idProduct=705a
[    2.036210] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.036211] usb 1-7: Product: Belkin 54g USB Network Adapter
[    2.036212] usb 1-7: Manufacturer: Belkin
[    2.156286] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[    2.298039] usb 1-8: New USB device found, idVendor=046d, idProduct=c534
[    2.298041] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.298042] usb 1-8: Product: USB Receiver
[    2.298043] usb 1-8: Manufacturer: Logitech
[    2.299900] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C534.0003/input/input5
[    2.356315] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-8/input0
[    2.358217] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C534.0004/input/input6
[    2.416393] hid-generic 0003:046D:C534.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-8/input1
[    2.481818] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.030612] random: crng init done
[    4.191312] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNU
TLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.208112] systemd[1]: Detected architecture x86-64.
[    4.220783] systemd[1]: Set hostname to <dimitris-H110M-DS2>.
[    5.686138] systemd[1]: Reached target Encrypted Volumes.
[    5.686260] systemd[1]: Listening on Journal Audit Socket.
[    5.686296] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.686302] systemd[1]: Reached target User and Group Name Lookups.
[    5.686307] systemd[1]: Reached target Remote File Systems (Pre).
[    5.686311] systemd[1]: Reached target Remote File Systems.
[    5.686331] systemd[1]: Listening on udev Kernel Socket.
[    6.382565] lp: driver loaded but no devices found
[    6.426095] ppdev: user-space parallel port driver
[    6.441217] parport_pc 00:01: reported by Plug and Play ACPI
[    6.441262] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
[    6.536239] lp0: using parport0 (interrupt-driven).
[   14.050551] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   14.070289] systemd-journald[293]: Received request to flush runtime journal from PID 1
[   14.173976] Bluetooth: Core ver 2.22
[   14.173986] NET: Registered protocol family 31
[   14.173986] Bluetooth: HCI device and connection manager initialized
[   14.173988] Bluetooth: HCI socket layer initialized
[   14.173989] Bluetooth: L2CAP socket layer initialized
[   14.173993] Bluetooth: SCO socket layer initialized
[   14.195619] Bluetooth: HCI UART driver ver 2.3
[   14.195621] Bluetooth: HCI UART protocol H4 registered
[   14.195621] Bluetooth: HCI UART protocol BCSP registered
[   14.195635] Bluetooth: HCI UART protocol LL registered
[   14.195636] Bluetooth: HCI UART protocol ATH3K registered
[   14.195636] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   14.195653] Bluetooth: HCI UART protocol Intel registered
[   14.195659] Bluetooth: HCI UART protocol Broadcom registered
[   14.195660] Bluetooth: HCI UART protocol QCA registered
[   14.195660] Bluetooth: HCI UART protocol AG6XX registered
[   14.195661] Bluetooth: HCI UART protocol Marvell registered
[   14.216408] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.217926] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   14.283757] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   14.284994] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   14.296999] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[   14.303022] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   14.303024] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.303025] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   14.303026] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.303027] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[   14.303028] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.303029] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   14.303030] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   14.303031] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   14.319396] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[   14.319426] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[   14.319453] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[   14.319480] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   14.319504] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   14.673667] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   14.673668] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   14.673668] RAPL PMU: hw unit of domain package 2^-14 Joules
[   14.673669] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   14.673669] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   14.673669] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   14.683387] SSE version of gcm_enc/dec engaged.
[   14.724211] intel_rapl: Found RAPL domain package
[   14.724212] intel_rapl: Found RAPL domain core
[   14.724213] intel_rapl: Found RAPL domain dram
[   15.520240] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[   15.990295] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
[   15.994797] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.995299] usbcore: registered new interface driver rt73usb
[   15.997029] rt73usb 1-7:1.0 wlx001cdf5832a5: renamed from wlan0
[   16.045243] Adding 7819260k swap on /dev/sda4.  Priority:-1 extents:1 across:7819260k FS
[   16.816177] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   16.959339] audit: type=1400 audit(1533556904.544:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=792
comm="apparmor_parser"
[   16.959342] audit: type=1400 audit(1533556904.544:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager
/nm-dhcp-client.action" pid=792 comm="apparmor_parser"
[   16.959343] audit: type=1400 audit(1533556904.544:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager
/nm-dhcp-helper" pid=792 comm="apparmor_parser"
[   16.959344] audit: type=1400 audit(1533556904.544:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/script
s/dhclient-script" pid=792 comm="apparmor_parser"
[   16.964862] audit: type=1400 audit(1533556904.549:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=79
3 comm="apparmor_parser"
[   16.964865] audit: type=1400 audit(1533556904.549:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//saniti
zed_helper" pid=793 comm="apparmor_parser"
[   16.964867] audit: type=1400 audit(1533556904.549:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-preview
er" pid=793 comm="apparmor_parser"
[   16.964869] audit: type=1400 audit(1533556904.549:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-preview
er//sanitized_helper" pid=793 comm="apparmor_parser"
[   16.964870] audit: type=1400 audit(1533556904.549:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbn
ailer" pid=793 comm="apparmor_parser"
[   16.964871] audit: type=1400 audit(1533556904.549:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbn
ailer//sanitized_helper" pid=793 comm="apparmor_parser"
[   21.264437] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[   21.264469] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
[   21.347618] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
[   21.402625] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[   21.404664] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   21.474564] r8169 0000:02:00.0 enp2s0: link down
[   21.474609] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   21.907008] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[   25.097672] usblp 1-3:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17
[   25.097752] usbcore: registered new interface driver usblp
[   27.074590] vboxdrv: loading out-of-tree module taints kernel.
[   27.074703] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   27.080038] vboxdrv: Found 2 processor cores
[   27.100560] vboxdrv: TSC mode is Invariant, tentative frequency 3311997474 Hz
[   27.100560] vboxdrv: Successfully loaded version 5.1.34_Ubuntu (interface 0x002a0000)
[   27.106454] VBoxNetFlt: Successfully started.
[   27.109826] VBoxNetAdp: Successfully started.
[   27.113551] VBoxPciLinuxInit
[   27.115372] vboxpci: IOMMU not found (not registered)
[   30.121858] usblp1: removed
[   30.126799] usblp 1-3:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17
[   33.559413] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[   37.973508] usb usb1-port7: disabled by hub (EMI?), re-enabling...
[   37.973513] usb 1-7: USB disconnect, device number 4
[   37.973565] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with e
[   49.029927] Bluetooth: BNEP (Ethernet Emulation) ver 1.3                                                          
[   49.029928] Bluetooth: BNEP filters: protocol multicast
[   49.029931] Bluetooth: BNEP socket layer initialized
[   56.179265] kauditd_printk_skb: 15 callbacks suppressed
[   56.179266] audit: type=1400 audit(1533556943.764:27): apparmor="DENIED" operation="open" profile="/usr/sbin/mysq
="/proc/1549/status" pid=1549 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[   56.179268] audit: type=1400 audit(1533556943.764:28): apparmor="DENIED" operation="open" profile="/usr/sbin/mysq
="/sys/devices/system/node/" pid=1549 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   56.179312] audit: type=1400 audit(1533556943.764:29): apparmor="DENIED" operation="open" profile="/usr/sbin/mysq
="/proc/1549/status" pid=1549 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
dimitris@dimitris-H110M-DS2:~$
Γνώσεις ⇛ Linux: Αν μου δώσεις οδηγίες σε τερματικό δεν τρομάζω ┃ Προγραμματισμός: Καθόλου┃ Αγγλικά: Εξαιρετικά
Λειτουργικό : Πάντα την τρέχουσα έκδοση ubuntu/kubuntu 64bit και σε κάποια pc 12.04 32bit
Συσκευές-> Πάρα πολλές, θα στο γράψω ανά περίπτωση.
Άβαταρ μέλους
dim459
superbTUX
superbTUX
 
Δημοσιεύσεις: 3668
Εγγραφή: 15 Φεβ 2009, 19:28
Τοποθεσία: Bόρεια Αττική
Εκτύπωση

Re: Πρόβλημα με ασύρματη usb Belkin

Δημοσίευσηαπό dim459 » 06 Αύγ 2018, 21:26

Εδώ το δεύτερο dmesg, δεν χώραγε στη δημοσίευση :

Κώδικας: Επιλογή όλων
dimitris@dimitris-H110M-DS2:~$ dmsh
Δε βρέθηκε εντολή 'dmsh', μήπως εννοούσατε:
Εντολή 'gmsh' από το πακέτο 'gmsh' (universe)
Εντολή 'dash' από το πακέτο 'dash' (main)
Εντολή 'dish' από το πακέτο 'dish' (universe)
Εντολή 'msh' από το πακέτο 'nmh' (universe)
Εντολή 'dsh' από το πακέτο 'dsh' (universe)
dmsh: η εντολή δε βρέθηκε
dimitris@dimitris-H110M-DS2:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0xc2, date = 2017-11-16
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x507 with crng_init=0
[    0.000000] Linux version 4.13.0-45-generic (buildd@lgw01-amd64-011) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #50~16.04.1-Ubuntu SMP Wed May 30 11:18:27 UTC 2018 (Ubuntu 4.13.0-45.50~16.04.1-generic 4.13.16)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-45-generic.efi.signed root=UUID=a845013a-99c1-466e-ad97-bcca3cc51e4d ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7a03fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b7a04000-0x00000000b7a04fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b7a05000-0x00000000b7a05fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b7a06000-0x00000000be53ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be540000-0x00000000be86efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000be86f000-0x00000000be9dcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be9dd000-0x00000000bf08bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf08c000-0x00000000bf7a2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf7a3000-0x00000000bf7fefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0xbecdd000  ACPI=0xbecdd000  SMBIOS=0xbf6ce000  SMBIOS 3.0=0xbf6cd000  MPS=0xfc9f0  ESRT=0xbd258918
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. H110M-DS2/H110M-DS2-CF, BIOS F21 06/09/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc70-0x000fcc7f] mapped at [ffff9109400fcc70]
[    0.000000] esrt: Reserving ESRT space from 0x00000000bd258918 to 0x00000000bd258950.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff910940095000] 95000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x5b32c000, 0x5b32cfff] PGTABLE
[    0.000000] BRK [0x5b32d000, 0x5b32dfff] PGTABLE
[    0.000000] BRK [0x5b32e000, 0x5b32efff] PGTABLE
[    0.000000] BRK [0x5b32f000, 0x5b32ffff] PGTABLE
[    0.000000] BRK [0x5b330000, 0x5b330fff] PGTABLE
[    0.000000] BRK [0x5b331000, 0x5b331fff] PGTABLE
[    0.000000] BRK [0x5b332000, 0x5b332fff] PGTABLE
[    0.000000] BRK [0x5b333000, 0x5b333fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x32080000-0x35037fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000BECDD000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BECDD0A0 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BED05690 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BECDD200 02848C (v02 ALASKA A M I    01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x00000000BF08BC40 000040
[    0.000000] ACPI: APIC 0x00000000BED057A8 000068 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000BED05810 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BED05858 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: FIDT 0x00000000BED05898 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BED05938 003154 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x00000000BED08A90 002544 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.000000] ACPI: HPET 0x00000000BED0AFD8 000038 (v01 INTEL  SKL      00000001 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000BED0B010 000E3B (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x00000000BED0BE50 002AD7 (v02 INTEL  xh_rvp10 00000000 INTL 20160422)
[    0.000000] ACPI: UEFI 0x00000000BED0E928 000042 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: SSDT 0x00000000BED0E970 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x00000000BED0F850 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: WSMT 0x00000000BED0F8E8 000028 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000BED0F910 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x00000000BED0FBB0 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x00000000BED12BB8 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x00000000BED12BF0 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: BGRT 0x00000000BED12C48 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DMAR 0x00000000BED12C80 000070 (v01 INTEL  SKL      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13efd3000-0x13effdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b7a03fff]
[    0.000000]   node   0: [mem 0x00000000b7a06000-0x00000000be53ffff]
[    0.000000]   node   0: [mem 0x00000000be86f000-0x00000000be9dcfff]
[    0.000000]   node   0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[    0.000000] On node 0 totalpages: 1037898
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 27 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12123 pages used for memmap
[    0.000000]   DMA32 zone: 775853 pages, LIFO batch:31
[    0.000000]   Normal zone: 4032 pages used for memmap
[    0.000000]   Normal zone: 258048 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7a04000-0xb7a04fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7a05000-0xb7a05fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe540000-0xbe86efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe9dd000-0xbf08bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf08c000-0xbf7a2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7a3000-0xbf7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff910a7ec00000 s146584 r8192 d29544 u1048576
[    0.000000] pcpu-alloc: s146584 r8192 d29544 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1021652
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-45-generic.efi.signed root=UUID=a845013a-99c1-466e-ad97-bcca3cc51e4d ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3814568K/4151592K available (12300K kernel code, 2481K rwdata, 4012K rodata, 2368K init, 2372K bss, 337024K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37875 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 524544, nr_irqs: 512, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.004000] tsc: Detected 3300.000 MHz processor
[    0.004000] tsc: Detected 3312.000 MHz TSC
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.00 BogoMIPS (lpj=13248000)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.030374] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.030972] Security Framework initialized
[    0.030973] Yama: becoming mindful.
[    0.030985] AppArmor: AppArmor initialized
[    0.031651] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.032008] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.032023] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.032034] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.032169] CPU: Physical Processor ID: 0
[    0.032170] CPU: Processor Core ID: 0
[    0.032174] FEATURE SPEC_CTRL Present
[    0.032176] mce: CPU supports 8 MCE banks
[    0.032182] CPU0: Thermal monitoring enabled (TM1)
[    0.032193] process: using mwait in idle threads
[    0.032195] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.032195] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.032196] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.032197] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
[    0.032197] Spectre V2 mitigation: Retpoline compiled kernel.  Defaulting IBRS to disabled
[    0.032198] Spectre V2 mitigation: Filling RSB on context switch
[    0.032198] Speculative Store Bypass: Vulnerable
[    0.032530] Freeing SMP alternatives memory: 36K
[    0.035582] smpboot: Max logical packages: 1
[    0.035587] DMAR: Host address width 39
[    0.035588] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.035593] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.035594] DMAR: RMRR base: 0x000000be7fd000 end: 0x000000be81cfff
[    0.035596] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed90000 IOMMU 0
[    0.035596] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.035597] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.036955] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.036956] x2apic enabled
[    0.036966] Switched APIC routing to cluster x2apic.
[    0.040941] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080656] TSC deadline timer enabled
[    0.080661] smpboot: CPU0: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.080705] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.080727] ... version:                4
[    0.080727] ... bit width:              48
[    0.080727] ... generic registers:      8
[    0.080728] ... value mask:             0000ffffffffffff
[    0.080728] ... max period:             00007fffffffffff
[    0.080728] ... fixed-purpose events:   3
[    0.080729] ... event mask:             00000007000000ff
[    0.080759] Hierarchical SRCU implementation.
[    0.081320] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.081330] smp: Bringing up secondary CPUs ...
[    0.081377] x86: Booting SMP configuration:
[    0.081378] .... node  #0, CPUs:      #1
[    0.082590] smp: Brought up 1 node, 2 CPUs
[    0.082590] smpboot: Total of 2 processors activated (13248.00 BogoMIPS)
[    0.082590] devtmpfs: initialized
[    0.082590] x86/mm: Memory block size: 128MB
[    0.082590] evm: security.selinux
[    0.082590] evm: security.SMACK64
[    0.082590] evm: security.SMACK64EXEC
[    0.082590] evm: security.SMACK64TRANSMUTE
[    0.082590] evm: security.SMACK64MMAP
[    0.082590] evm: security.ima
[    0.082590] evm: security.capability
[    0.082590] PM: Registering ACPI NVS region [mem 0xb7a04000-0xb7a04fff] (4096 bytes)
[    0.082590] PM: Registering ACPI NVS region [mem 0xbe9dd000-0xbf08bfff] (7008256 bytes)
[    0.082590] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.082590] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.082590] pinctrl core: initialized pinctrl subsystem
[    0.082590] RTC time: 16:55:23, date: 08/06/18
[    0.082590] NET: Registered protocol family 16
[    0.084007] cpuidle: using governor ladder
[    0.084007] cpuidle: using governor menu
[    0.084007] PCCT header not found.
[    0.084029] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.084030] ACPI: bus type PCI registered
[    0.084031] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.084072] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.084073] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.084079] PCI: Using configuration type 1 for base access
[    0.084687] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.084687] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.084687] ACPI: Added _OSI(Module Device)
[    0.084687] ACPI: Added _OSI(Processor Device)
[    0.084687] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.084687] ACPI: Added _OSI(Processor Aggregator Device)
[    0.084893] ACPI: Executed 35 blocks of module-level executable AML code
[    0.094374] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.097325] ACPI: Dynamic OEM Table Load:
[    0.097334] ACPI: SSDT 0xFFFF910A797FC800 0006D5 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.097502] ACPI: Executed 1 blocks of module-level executable AML code
[    0.097551] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.098571] ACPI: Dynamic OEM Table Load:
[    0.098574] ACPI: SSDT 0xFFFF910A796ED800 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.098728] ACPI: Executed 1 blocks of module-level executable AML code
[    0.099027] ACPI: Dynamic OEM Table Load:
[    0.099031] ACPI: SSDT 0xFFFF910A797FB800 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.099340] ACPI: Executed 1 blocks of module-level executable AML code
[    0.099483] ACPI: Dynamic OEM Table Load:
[    0.099486] ACPI: SSDT 0xFFFF910A797EDC00 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.099638] ACPI: Executed 1 blocks of module-level executable AML code
[    0.101150] ACPI: Interpreter enabled
[    0.101182] ACPI: (supports S0 S3 S4 S5)
[    0.101183] ACPI: Using IOAPIC for interrupt routing
[    0.101212] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.101966] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.103884] ACPI: Power Resource [PG00] (on)
[    0.104169] ACPI: Power Resource [PG01] (on)
[    0.104444] ACPI: Power Resource [PG02] (on)
[    0.107060] ACPI: Power Resource [WRST] (on)
[    0.107310] ACPI: Power Resource [WRST] (on)
[    0.107557] ACPI: Power Resource [WRST] (on)
[    0.107803] ACPI: Power Resource [WRST] (on)
[    0.108051] ACPI: Power Resource [WRST] (on)
[    0.108298] ACPI: Power Resource [WRST] (on)
[    0.108546] ACPI: Power Resource [WRST] (on)
[    0.108790] ACPI: Power Resource [WRST] (on)
[    0.109037] ACPI: Power Resource [WRST] (on)
[    0.109285] ACPI: Power Resource [WRST] (on)
[    0.109551] ACPI: Power Resource [WRST] (on)
[    0.109800] ACPI: Power Resource [WRST] (on)
[    0.110046] ACPI: Power Resource [WRST] (on)
[    0.110294] ACPI: Power Resource [WRST] (on)
[    0.110539] ACPI: Power Resource [WRST] (on)
[    0.110787] ACPI: Power Resource [WRST] (on)
[    0.111034] ACPI: Power Resource [WRST] (on)
[    0.111975] ACPI: Power Resource [WRST] (on)
[    0.112227] ACPI: Power Resource [WRST] (on)
[    0.112480] ACPI: Power Resource [WRST] (on)
[    0.123483] ACPI: Power Resource [FN00] (off)
[    0.123542] ACPI: Power Resource [FN01] (off)
[    0.123601] ACPI: Power Resource [FN02] (off)
[    0.123660] ACPI: Power Resource [FN03] (off)
[    0.123718] ACPI: Power Resource [FN04] (off)
[    0.124643] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.124648] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.124673] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.125201] PCI host bridge to bus 0000:00
[    0.125202] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.125203] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.125204] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.125205] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff window]
[    0.125206] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.125207] pci_bus 0000:00: root bus resource [bus 00-7e]
[    0.125214] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
[    0.125466] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.125497] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.125690] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.125710] pci 0000:00:14.0: reg 0x10: [mem 0xeff10000-0xeff1ffff 64bit]
[    0.125772] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.125941] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.125965] pci 0000:00:16.0: reg 0x10: [mem 0xeff2d000-0xeff2dfff 64bit]
[    0.126029] pci 0000:00:16.0: PME# supported from D3hot
[    0.126149] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.126165] pci 0000:00:17.0: reg 0x10: [mem 0xeff28000-0xeff29fff]
[    0.126172] pci 0000:00:17.0: reg 0x14: [mem 0xeff2c000-0xeff2c0ff]
[    0.126178] pci 0000:00:17.0: reg 0x18: [io  0xf050-0xf057]
[    0.126185] pci 0000:00:17.0: reg 0x1c: [io  0xf040-0xf043]
[    0.126191] pci 0000:00:17.0: reg 0x20: [io  0xf020-0xf03f]
[    0.126198] pci 0000:00:17.0: reg 0x24: [mem 0xeff2b000-0xeff2b7ff]
[    0.126234] pci 0000:00:17.0: PME# supported from D3hot
[    0.126342] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[    0.126401] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.126532] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
[    0.126590] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.126707] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
[    0.126765] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.126881] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
[    0.126939] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.127055] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.127120] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.127237] pci 0000:00:1d.1: [8086:a119] type 01 class 0x060400
[    0.127302] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
[    0.127441] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
[    0.127641] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.127653] pci 0000:00:1f.2: reg 0x10: [mem 0xeff24000-0xeff27fff]
[    0.127787] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.127811] pci 0000:00:1f.3: reg 0x10: [mem 0xeff20000-0xeff23fff 64bit]
[    0.127835] pci 0000:00:1f.3: reg 0x20: [mem 0xeff00000-0xeff0ffff 64bit]
[    0.127879] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.128030] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.128089] pci 0000:00:1f.4: reg 0x10: [mem 0xeff2a000-0xeff2a0ff 64bit]
[    0.128158] pci 0000:00:1f.4: reg 0x20: [io  0xf000-0xf01f]
[    0.128353] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
[    0.128372] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.128381] pci 0000:01:00.0: reg 0x18: [mem 0xefe20000-0xefe3ffff 64bit]
[    0.128387] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.128398] pci 0000:01:00.0: reg 0x30: [mem 0xefe00000-0xefe1ffff pref]
[    0.128411] pci 0000:01:00.0: BAR 0: assigned to efifb
[    0.128439] pci 0000:01:00.0: supports D1 D2
[    0.128477] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
[    0.128495] pci 0000:01:00.1: reg 0x10: [mem 0xefe40000-0xefe43fff 64bit]
[    0.128559] pci 0000:01:00.1: supports D1 D2
[    0.140033] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.140039] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.140045] pci 0000:00:01.0:   bridge window [mem 0xefe00000-0xefefffff]
[    0.140065] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.140154] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.140181] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.140206] pci 0000:02:00.0: reg 0x18: [mem 0xefd00000-0xefd00fff 64bit]
[    0.140222] pci 0000:02:00.0: reg 0x20: [mem 0xe0000000-0xe0003fff 64bit pref]
[    0.140310] pci 0000:02:00.0: supports D1 D2
[    0.140311] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.140414] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.140416] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.140419] pci 0000:00:1c.0:   bridge window [mem 0xefd00000-0xefdfffff]
[    0.140422] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.140489] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.140571] pci 0000:04:00.0: [1106:3483] type 00 class 0x0c0330
[    0.140595] pci 0000:04:00.0: reg 0x10: [mem 0xefc00000-0xefc00fff 64bit]
[    0.140678] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.140752] pci 0000:00:1c.6: PCI bridge to [bus 04]
[    0.140756] pci 0000:00:1c.6:   bridge window [mem 0xefc00000-0xefcfffff]
[    0.140825] pci 0000:00:1c.7: PCI bridge to [bus 05]
[    0.140897] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.140971] pci 0000:00:1d.1: PCI bridge to [bus 07]
[    0.142740] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142778] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.142815] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142852] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142888] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142925] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142962] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.143532] SCSI subsystem initialized
[    0.143555] libata version 3.00 loaded.
[    0.143555] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.143555] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.143555] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.143555] vgaarb: loaded
[    0.143555] ACPI: bus type USB registered
[    0.143555] usbcore: registered new interface driver usbfs
[    0.143555] usbcore: registered new interface driver hub
[    0.143555] usbcore: registered new device driver usb
[    0.143555] EDAC MC: Ver: 3.0.0
[    0.143555] Registered efivars operations
[    0.161894] PCI: Using ACPI for IRQ routing
[    0.175195] PCI: pci_cache_line_size set to 64 bytes
[    0.175240] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.175241] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.175242] e820: reserve RAM buffer [mem 0xb7a04000-0xb7ffffff]
[    0.175242] e820: reserve RAM buffer [mem 0xbe540000-0xbfffffff]
[    0.175243] e820: reserve RAM buffer [mem 0xbe9dd000-0xbfffffff]
[    0.175244] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.175245] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[    0.175298] NetLabel: Initializing
[    0.175298] NetLabel:  domain hash size = 128
[    0.175298] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.175308] NetLabel:  unlabeled traffic allowed by default
[    0.175316] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.175316] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.177025] clocksource: Switched to clocksource hpet
[    0.182488] VFS: Disk quotas dquot_6.6.0
[    0.182500] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.182564] AppArmor: AppArmor Filesystem Enabled
[    0.182592] pnp: PnP ACPI init
[    0.182824] system 00:00: [io  0x0a00-0x0a2f] has been reserved
[    0.182825] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.182826] system 00:00: [io  0x0a40-0x0a4f] has been reserved
[    0.182829] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.183186] pnp 00:01: [dma 0 disabled]
[    0.183291] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.183600] pnp 00:02: [dma 0 disabled]
[    0.183629] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.183731] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.183733] system 00:03: [io  0xffff] has been reserved
[    0.183734] system 00:03: [io  0xffff] has been reserved
[    0.183735] system 00:03: [io  0xffff] has been reserved
[    0.183736] system 00:03: [io  0x1800-0x18fe] has been reserved
[    0.183737] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.183739] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.183806] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.183807] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.183822] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.183846] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.183848] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.184041] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.184042] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.184043] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.184044] system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.184046] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.184047] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.184048] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.184049] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.184050] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.184051] system 00:07: [mem 0xeffe0000-0xefffffff] has been reserved
[    0.184053] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.184080] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.184081] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.184083] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.184084] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.184085] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.184086] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.184087] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.184088] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.184316] system 00:09: [io  0xff00-0xfffe] has been reserved
[    0.184317] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185180] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.185181] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.185182] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.185184] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185827] pnp: PnP ACPI: found 11 devices
[    0.193378] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.193415] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.193417] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.193419] pci 0000:00:01.0:   bridge window [mem 0xefe00000-0xefefffff]
[    0.193420] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.193423] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.193425] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.193428] pci 0000:00:1c.0:   bridge window [mem 0xefd00000-0xefdfffff]
[    0.193430] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.193433] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.193441] pci 0000:00:1c.6: PCI bridge to [bus 04]
[    0.193444] pci 0000:00:1c.6:   bridge window [mem 0xefc00000-0xefcfffff]
[    0.193449] pci 0000:00:1c.7: PCI bridge to [bus 05]
[    0.193456] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.193463] pci 0000:00:1d.1: PCI bridge to [bus 07]
[    0.193472] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.193473] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.193474] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.193475] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xefffffff window]
[    0.193476] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.193477] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.193478] pci_bus 0000:01: resource 1 [mem 0xefe00000-0xefefffff]
[    0.193479] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.193480] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.193480] pci_bus 0000:02: resource 1 [mem 0xefd00000-0xefdfffff]
[    0.193481] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.193482] pci_bus 0000:04: resource 1 [mem 0xefc00000-0xefcfffff]
[    0.193585] NET: Registered protocol family 2
[    0.193678] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.193728] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.193804] TCP: Hash tables configured (established 32768 bind 32768)
[    0.193823] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.193835] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.193864] NET: Registered protocol family 1
[    0.194546] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.194698] PCI: CLS 64 bytes, default 64
[    0.194723] Unpacking initramfs...
[    0.723690] Freeing initrd memory: 48864K
[    0.723766] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.723768] software IO TLB [mem 0xb24d6000-0xb64d6000] (64MB) mapped at [ffff9109f24d6000-ffff9109f64d5fff]
[    0.723888] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd93f9e57, max_idle_ns: 440795263784 ns
[    0.723938] Scanning for low memory corruption every 60 seconds
[    0.724214] audit: initializing netlink subsys (disabled)
[    0.724262] audit: type=2000 audit(1533574523.724:1): state=initialized audit_enabled=0 res=1
[    0.724503] Initialise system trusted keyrings
[    0.724509] Key type blacklist registered
[    0.724546] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.725249] zbud: loaded
[    0.725588] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.725688] fuse init (API version 7.26)
[    0.727875] Key type asymmetric registered
[    0.727876] Asymmetric key parser 'x509' registered
[    0.727893] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.727932] io scheduler noop registered
[    0.727933] io scheduler deadline registered
[    0.727948] io scheduler cfq registered (default)
[    0.728769] efifb: probing for efifb
[    0.728777] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
[    0.728777] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.728778] efifb: scrolling: redraw
[    0.728779] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.728840] Console: switching to colour frame buffer device 128x48
[    0.728850] fb0: EFI VGA frame buffer device
[    0.728854] intel_idle: MWAIT substates: 0x142120
[    0.728854] intel_idle: v0.4.1 model 0x5E
[    0.728921] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.729022] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.729030] ACPI: Sleep Button [SLPB]
[    0.729051] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.729058] ACPI: Power Button [PWRB]
[    0.729077] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.729126] ACPI: Power Button [PWRF]
[    0.788723] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.848452] thermal LNXTHERM:00: registered as thermal_zone0
[    0.848453] ACPI: Thermal Zone [TZ00] (28 C)
[    0.848567] thermal LNXTHERM:01: registered as thermal_zone1
[    0.848567] ACPI: Thermal Zone [TZ01] (30 C)
[    0.848617] GHES: HEST is not enabled!
[    0.848778] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.869621] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.872139] Linux agpgart interface v0.103
[    0.873176] loop: module loaded
[    0.873270] libphy: Fixed MDIO Bus: probed
[    0.873271] tun: Universal TUN/TAP device driver, 1.6
[    0.873319] PPP generic driver version 2.4.2
[    0.873372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.873373] ehci-pci: EHCI PCI platform driver
[    0.873379] ehci-platform: EHCI generic platform driver
[    0.873385] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.873385] ohci-pci: OHCI PCI platform driver
[    0.873391] ohci-platform: OHCI generic platform driver
[    0.873394] uhci_hcd: USB Universal Host Controller Interface driver
[    0.873517] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.873520] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.874607] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.874611] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.874684] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.874685] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.874686] usb usb1: Product: xHCI Host Controller
[    0.874687] usb usb1: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    0.874688] usb usb1: SerialNumber: 0000:00:14.0
[    0.874778] hub 1-0:1.0: USB hub found
[    0.874790] hub 1-0:1.0: 10 ports detected
[    0.875481] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.875483] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.875505] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.875506] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.875507] usb usb2: Product: xHCI Host Controller
[    0.875508] usb usb2: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    0.875509] usb usb2: SerialNumber: 0000:00:14.0
[    0.875593] hub 2-0:1.0: USB hub found
[    0.875600] hub 2-0:1.0: 4 ports detected
[    0.876122] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.876126] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.876217] xhci_hcd 0000:04:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
[    0.876282] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.876283] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.876284] usb usb3: Product: xHCI Host Controller
[    0.876285] usb usb3: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    0.876285] usb usb3: SerialNumber: 0000:04:00.0
[    0.876396] hub 3-0:1.0: USB hub found
[    0.876400] hub 3-0:1.0: 1 port detected
[    0.876435] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.876437] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.876455] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.876465] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.876466] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.876467] usb usb4: Product: xHCI Host Controller
[    0.876468] usb usb4: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    0.876468] usb usb4: SerialNumber: 0000:04:00.0
[    0.876576] hub 4-0:1.0: USB hub found
[    0.876583] hub 4-0:1.0: 4 ports detected
[    0.876663] i8042: PNP: No PS/2 controller found.
[    0.876817] mousedev: PS/2 mouse device common for all mice
[    0.877083] rtc_cmos 00:05: RTC can wake from S4
[    0.877480] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.877562] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.877565] i2c /dev entries driver
[    0.877598] device-mapper: uevent: version 1.0.3
[    0.877665] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.877667] intel_pstate: Intel P-state driver initializing
[    0.877800] intel_pstate: HWP enabled
[    0.877842] ledtrig-cpu: registered to indicate activity on CPUs
[    0.877844] EFI Variables Facility v0.08 2004-May-17
[    0.899694] NET: Registered protocol family 10
[    0.903403] Segment Routing with IPv6
[    0.903416] NET: Registered protocol family 17
[    0.903422] Key type dns_resolver registered
[    0.903579] RAS: Correctable Errors collector initialized.
[    0.903601] microcode: sig=0x506e3, pf=0x2, revision=0xc2
[    0.903657] microcode: Microcode Update Driver: v2.2.
[    0.903747] sched_clock: Marking stable (903654655, 0)->(902404097, 1250558)
[    0.904019] registered taskstats version 1
[    0.904027] Loading compiled-in X.509 certificates
[    0.906057] Loaded X.509 cert 'Build time autogenerated kernel key: fec222083a1a40f2051f2b073ec28e5cb659a232'
[    0.906535] Couldn't get size: 0x800000000000000e
[    0.906537] MODSIGN: Couldn't get UEFI db list
[    0.908861] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[    0.909100] Couldn't get size: 0x800000000000000e
[    0.909101] MODSIGN: Couldn't get UEFI dbx list
[    0.909114] zswap: loaded using pool lzo/zbud
[    0.912468] Key type big_key registered
[    0.912470] Key type trusted registered
[    0.914022] Key type encrypted registered
[    0.914024] AppArmor: AppArmor sha1 policy hashing enabled
[    0.914026] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.914038] evm: HMAC attrs: 0x1
[    0.914918]   Magic number: 14:51:944
[    0.914945] tty tty1: hash matches
[    0.914958] acpi INT3471:01: hash matches
[    0.915111] rtc_cmos 00:05: setting system clock to 2018-08-06 16:55:24 UTC (1533574524)
[    0.915156] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.915156] EDD information not available.
[    0.915184] PM: Hibernation image not present or could not be loaded.
[    0.916523] Freeing unused kernel memory: 2368K
[    0.936315] Write protecting the kernel read-only data: 18432k
[    0.936683] Freeing unused kernel memory: 2024K
[    0.936867] Freeing unused kernel memory: 84K
[    0.938141] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.938141] x86/mm: Checking user space page tables
[    0.939344] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.991646] hidraw: raw HID events driver (C) Jiri Kosina
[    1.018381] ahci 0000:00:17.0: version 3.0
[    1.020964] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.020968] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.028657] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    1.028660] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[    1.032894] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffb5018068d000, e0:d5:5e:13:fd:c1, XID 0c000800 IRQ 124
[    1.032895] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.043541] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.060593] [drm] radeon kernel modesetting enabled.
[    1.062241] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.062241] AMD IOMMUv2 functionality not available on this system
[    1.064408] CRAT table not found
[    1.064409] Finished initializing topology ret=0
[    1.064416] kfd kfd: Initialized module
[    1.064536] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    1.064537] fb: switching to radeondrmfb from EFI VGA
[    1.064551] Console: switching to colour dummy device 80x25
[    1.064763] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1043:0x03DA 0x00).
[    1.064826] ATOM BIOS: 6779.13.12.0.0.AS02
[    1.065349] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.065350] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    1.065352] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.065353] [drm] RAM width 64bits DDR
[    1.065385] [TTM] Zone  kernel: Available graphics memory: 1998878 kiB
[    1.065386] [TTM] Initializing pool allocator
[    1.065389] [TTM] Initializing DMA pool allocator
[    1.065401] [drm] radeon: 1024M of VRAM memory ready
[    1.065401] [drm] radeon: 1024M of GTT memory ready.
[    1.065406] [drm] Loading CAICOS Microcode
[    1.065453] [drm] Internal thermal controller without fan control
[    1.065983] scsi host0: ahci
[    1.066146] scsi host1: ahci
[    1.066298] scsi host2: ahci
[    1.066448] scsi host3: ahci
[    1.066472] ata1: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b100 irq 123
[    1.066474] ata2: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b180 irq 123
[    1.066475] ata3: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b200 irq 123
[    1.066476] ata4: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b280 irq 123
[    1.069779] [drm] radeon: dpm initialized
[    1.069833] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.070324] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    1.080183] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[    1.080288] radeon 0000:01:00.0: WB enabled
[    1.080289] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff910a6ead1c00
[    1.080290] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff910a6ead1c0c
[    1.081034] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffb50181032118
[    1.081035] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.081035] [drm] Driver supports precise vblank timestamp query.
[    1.081036] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.081070] radeon 0000:01:00.0: radeon: using MSI.
[    1.081092] [drm] radeon: irq initialized.
[    1.097468] [drm] ring test on 0 succeeded in 3 usecs
[    1.097477] [drm] ring test on 3 succeeded in 6 usecs
[    1.200051] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    1.208049] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.273169] [drm] ring test on 5 succeeded in 2 usecs
[    1.273176] [drm] UVD initialized successfully.
[    1.273371] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.273485] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.341191] usb 1-3: New USB device found, idVendor=03f0, idProduct=3d17
[    1.341193] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.341194] usb 1-3: Product: HP LaserJet P1005
[    1.341195] usb 1-3: Manufacturer: Hewlett-Packard
[    1.341196] usb 1-3: SerialNumber: BC1GKXP
[    1.350206] usb 3-1: New USB device found, idVendor=2109, idProduct=3431
[    1.350207] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.350208] usb 3-1: Product: USB2.0 Hub
[    1.350630] hub 3-1:1.0: USB hub found
[    1.350926] hub 3-1:1.0: 4 ports detected
[    1.379003] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.379020] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.379033] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.379046] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.379885] ata3.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133
[    1.379886] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.379992] ata1.00: ATA-8: ST3500312CS, SS16, max UDMA/133
[    1.379993] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.380123] ata4.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
[    1.380859] ata3.00: configured for UDMA/133
[    1.381179] ata1.00: configured for UDMA/133
[    1.381332] scsi 0:0:0:0: Direct-Access     ATA      ST3500312CS      SS16 PQ: 0 ANSI: 5
[    1.381557] ata4.00: configured for UDMA/133
[    1.407665] ata2.00: ATA-8: ST3320613AS, SD22, max UDMA/133
[    1.407667] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.449699] ata2.00: configured for UDMA/133
[    1.456418] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.456602] scsi 1:0:0:0: Direct-Access     ATA      ST3320613AS      SD22 PQ: 0 ANSI: 5
[    1.456639] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.456644] sd 0:0:0:0: [sda] Write Protect is off
[    1.456645] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.456653] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.460295] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.488422] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.488462] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.488476] sd 1:0:0:0: [sdb] Write Protect is off
[    1.488477] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.488498] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.488608] scsi 2:0:0:0: Direct-Access     ATA      ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5
[    1.516104]  sdb: sdb1
[    1.516932] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.525743]  sda: sda1 sda2 sda3 sda4
[    1.526464] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.528192] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.528272] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.528273] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[    1.528284] sd 2:0:0:0: [sdc] Write Protect is off
[    1.528285] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.528307] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.529021] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24D5MT       1.00 PQ: 0 ANSI: 5
[    1.555645] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.555647] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.555748] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.555797] sr 3:0:0:0: Attached scsi generic sg3 type 5
[    1.570500]  sdc: sdc1
[    1.571359] sd 2:0:0:0: [sdc] Attached SCSI disk
[    1.580044] usb 1-5: device descriptor read/64, error -71
[    1.724115] clocksource: Switched to clocksource tsc
[    1.808276] usb 1-5: device descriptor read/64, error -71
[    1.948221] [drm] ib test on ring 5 succeeded
[    1.948827] [drm] Radeon Display Connectors
[    1.948828] [drm] Connector 0:
[    1.948828] [drm]   HDMI-A-1
[    1.948829] [drm]   HPD1
[    1.948830] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    1.948830] [drm]   Encoders:
[    1.948830] [drm]     DFP1: INTERNAL_UNIPHY1
[    1.948831] [drm] Connector 1:
[    1.948831] [drm]   DVI-D-1
[    1.948831] [drm]   HPD4
[    1.948832] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[    1.948833] [drm]   Encoders:
[    1.948833] [drm]     DFP2: INTERNAL_UNIPHY
[    1.948833] [drm] Connector 2:
[    1.948834] [drm]   VGA-1
[    1.948835] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    1.948835] [drm]   Encoders:
[    1.948835] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.006817] [drm] fb mappable at 0xD0363000
[    2.006818] [drm] vram apper at 0xD0000000
[    2.006819] [drm] size 5242880
[    2.006819] [drm] fb depth is 24
[    2.006820] [drm]    pitch is 5120
[    2.006983] fbcon: radeondrmfb (fb0) is primary device
[    2.007026] Console: switching to colour frame buffer device 160x64
[    2.007040] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.020246] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[    2.044112] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[    2.164298] usb 1-5: device descriptor read/64, error -71
[    2.392053] usb 1-5: device descriptor read/64, error -71                                                                                         
[    2.552541] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.624279] usb 1-5: new high-speed USB device number 5 using xhci_hcd
[    2.624449] usb 1-5: Device not responding to setup address.
[    2.832449] usb 1-5: Device not responding to setup address.
[    3.040280] usb 1-5: device not accepting address 5, error -71
[    3.160121] usb 1-5: new high-speed USB device number 6 using xhci_hcd
[    3.160295] usb 1-5: Device not responding to setup address.
[    3.204836] random: crng init done
[    3.368458] usb 1-5: Device not responding to setup address.
[    3.576038] usb 1-5: device not accepting address 6, error -71
[    3.576084] usb usb1-port5: unable to enumerate USB device                                                                                         
[    3.696030] usb 1-6: new low-speed USB device number 7 using xhci_hcd
[    3.842345] usb 1-6: New USB device found, idVendor=1c4f, idProduct=0002
[    3.842346] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.842347] usb 1-6: Product: USB Keyboard
[    3.842348] usb 1-6: Manufacturer: SIGMACHIP
[    3.960022] usb 1-8: new full-speed USB device number 8 using xhci_hcd
[    4.102660] usb 1-8: New USB device found, idVendor=046d, idProduct=c534
[    4.102662] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.102663] usb 1-8: Product: USB Receiver
[    4.102664] usb 1-8: Manufacturer: Logitech
[    4.281637] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.300434] systemd[1]: Detected architecture x86-64.
[    4.311334] systemd[1]: Set hostname to <dimitris-H110M-DS2>.
[    5.735944] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.736055] systemd[1]: Listening on Journal Socket.
[    5.736100] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.736123] systemd[1]: Listening on Syslog Socket.
[    5.736267] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.736295] systemd[1]: Listening on udev Control Socket.
[    5.736323] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    6.300123] lp: driver loaded but no devices found
[    6.374122] ppdev: user-space parallel port driver
[    6.378941] parport_pc 00:01: reported by Plug and Play ACPI
[    6.378986] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
[    6.480221] lp0: using parport0 (interrupt-driven).
[   14.222389] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   14.244456] systemd-journald[291]: Received request to flush runtime journal from PID 1
[   14.376306] Bluetooth: Core ver 2.22
[   14.376316] NET: Registered protocol family 31
[   14.376316] Bluetooth: HCI device and connection manager initialized
[   14.376318] Bluetooth: HCI socket layer initialized
[   14.376320] Bluetooth: L2CAP socket layer initialized
[   14.376323] Bluetooth: SCO socket layer initialized
[   14.377317] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.381978] Bluetooth: HCI UART driver ver 2.3
[   14.381979] Bluetooth: HCI UART protocol H4 registered
[   14.381980] Bluetooth: HCI UART protocol BCSP registered
[   14.381994] Bluetooth: HCI UART protocol LL registered
[   14.381994] Bluetooth: HCI UART protocol ATH3K registered
[   14.381995] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   14.382010] Bluetooth: HCI UART protocol Intel registered
[   14.382017] Bluetooth: HCI UART protocol Broadcom registered
[   14.382017] Bluetooth: HCI UART protocol QCA registered
[   14.382018] Bluetooth: HCI UART protocol AG6XX registered
[   14.382018] Bluetooth: HCI UART protocol Marvell registered
[   14.383762] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   14.461303] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   14.462503] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   14.473580] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input3
[   14.476200] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   14.476202] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.476203] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   14.476204] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.476205] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[   14.476206] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.476207] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   14.476208] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   14.476209] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   14.488101] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
[   14.488135] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[   14.488163] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[   14.488191] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[   14.488219] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[   14.505461] usbcore: registered new interface driver usbhid
[   14.505462] usbhid: USB HID core driver
[   14.542679] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   14.542681] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   14.542681] RAPL PMU: hw unit of domain package 2^-14 Joules
[   14.542682] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   14.542682] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   14.542682] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   14.550837] SSE version of gcm_enc/dec engaged.
[   14.598623] intel_rapl: Found RAPL domain package
[   14.598624] intel_rapl: Found RAPL domain core
[   14.598625] intel_rapl: Found RAPL domain dram
[   15.518639] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1C4F:0002.0001/input/input9
[   15.580191] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-6/input0
[   15.580310] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:1C4F:0002.0002/input/input10
[   15.640231] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-6/input1
[   15.640326] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C534.0003/input/input11
[   15.700161] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-8/input0
[   15.700320] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C534.0004/input/input12
[   15.760248] hid-generic 0003:046D:C534.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-8/input1
[   16.186605] Adding 7819260k swap on /dev/sda4.  Priority:-1 extents:1 across:7819260k FS
[   17.242473] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   17.324260] audit: type=1400 audit(1533574540.909:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=753 comm="apparmor_parser"
[   17.324263] audit: type=1400 audit(1533574540.909:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=753 comm="apparmor_parser"
[   17.324264] audit: type=1400 audit(1533574540.909:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=753 comm="apparmor_parser"
[   17.324265] audit: type=1400 audit(1533574540.909:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=753 comm="apparmor_parser"
[   17.329737] audit: type=1400 audit(1533574540.914:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=754 comm="apparmor_parser"
[   17.329740] audit: type=1400 audit(1533574540.914:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=754 comm="apparmor_parser"
[   17.329741] audit: type=1400 audit(1533574540.914:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=754 comm="apparmor_parser"
[   17.329742] audit: type=1400 audit(1533574540.914:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=754 comm="apparmor_parser"
[   17.329744] audit: type=1400 audit(1533574540.914:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=754 comm="apparmor_parser"
[   17.329745] audit: type=1400 audit(1533574540.914:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=754 comm="apparmor_parser"
[   21.680373] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   21.786783] r8169 0000:02:00.0 enp2s0: link down
[   21.786859] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   26.250213] usblp 1-3:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17
[   26.250307] usbcore: registered new interface driver usblp
[   27.134044] vboxdrv: loading out-of-tree module taints kernel.
[   27.134154] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   27.138995] vboxdrv: Found 2 processor cores
[   27.156592] vboxdrv: TSC mode is Invariant, tentative frequency 3311996162 Hz
[   27.156593] vboxdrv: Successfully loaded version 5.1.34_Ubuntu (interface 0x002a0000)
[   27.160174] VBoxNetFlt: Successfully started.
[   27.163419] VBoxNetAdp: Successfully started.
[   27.166793] VBoxPciLinuxInit
[   27.168504] vboxpci: IOMMU not found (not registered)
[   49.516530] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   49.516532] Bluetooth: BNEP filters: protocol multicast
[   49.516534] Bluetooth: BNEP socket layer initialized
[   58.031328] kauditd_printk_skb: 15 callbacks suppressed
[   58.031329] audit: type=1400 audit(1533574581.616:27): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/1470/status" pid=1470 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[   58.031331] audit: type=1400 audit(1533574581.616:28): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=1470 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   58.031374] audit: type=1400 audit(1533574581.616:29): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/1470/status" pid=1470 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 1644.451911] usb 1-5: new high-speed USB device number 9 using xhci_hcd
[ 1644.763605] usb 1-5: New USB device found, idVendor=050d, idProduct=705a
[ 1644.763607] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1644.763609] usb 1-5: Product: Belkin 54g USB Network Adapter
[ 1644.763610] usb 1-5: Manufacturer: Belkin
[ 1645.952108] usb 1-5: reset high-speed USB device number 9 using xhci_hcd
[ 1646.422127] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
[ 1646.426874] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 1646.430755] usbcore: registered new interface driver rt73usb
[ 1646.436991] rt73usb 1-5:1.0 wlx001cdf5832a5: renamed from wlan0
[ 1646.466796] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[ 1646.466830] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
[ 1646.475816] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
[ 1646.531480] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[ 1646.576504] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[ 1649.028243] wlx001cdf5832a5: authenticate with 72:1d:6a:15:19:7e
[ 1649.068226] wlx001cdf5832a5: send auth to 72:1d:6a:15:19:7e (try 1/3)
[ 1649.072958] wlx001cdf5832a5: authenticated
[ 1649.075994] wlx001cdf5832a5: associate with 72:1d:6a:15:19:7e (try 1/3)
[ 1649.078911] wlx001cdf5832a5: RX AssocResp from 72:1d:6a:15:19:7e (capab=0x411 status=0 aid=8)
[ 1649.086002] wlx001cdf5832a5: associated
[ 1649.086036] IPv6: ADDRCONF(NETDEV_CHANGE): wlx001cdf5832a5: link becomes ready
dimitris@dimitris-H110M-DS2:~$
Γνώσεις ⇛ Linux: Αν μου δώσεις οδηγίες σε τερματικό δεν τρομάζω ┃ Προγραμματισμός: Καθόλου┃ Αγγλικά: Εξαιρετικά
Λειτουργικό : Πάντα την τρέχουσα έκδοση ubuntu/kubuntu 64bit και σε κάποια pc 12.04 32bit
Συσκευές-> Πάρα πολλές, θα στο γράψω ανά περίπτωση.
Άβαταρ μέλους
dim459
superbTUX
superbTUX
 
Δημοσιεύσεις: 3668
Εγγραφή: 15 Φεβ 2009, 19:28
Τοποθεσία: Bόρεια Αττική
Εκτύπωση

Re: Πρόβλημα με ασύρματη usb Belkin

Δημοσίευσηαπό dim459 » 06 Αύγ 2018, 21:38

Και εδώ ένα dmesg όταν η κάρτα ενεργοποιήθηκε κανονικά με το άνοιγμα του υπολογιστή.
Δεν είμαι βέβαιος, αλλά έχω την αίσθηση ότι όταν η κάρτα έχει προηγουμένως ενεργοποιηθεί, αν κλείσει ο υπολογιστής και ανοίξει σε σύντομο διάστημα, τότε ενεργοποιείται.
Κώδικας: Επιλογή όλων
dimitris@dimitris-H110M-DS2:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0xc2, date = 2017-11-16
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x507 with crng_init=0
[    0.000000] Linux version 4.13.0-45-generic (buildd@lgw01-amd64-011) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #50~16.04.1-Ubuntu SMP Wed May 30 11:18:27 UTC 2018 (Ubuntu 4.13.0-45.50~16.04.1-generic 4.13.16)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-45-generic.efi.signed root=UUID=a845013a-99c1-466e-ad97-bcca3cc51e4d ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7a03fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b7a04000-0x00000000b7a04fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b7a05000-0x00000000b7a05fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b7a06000-0x00000000be53ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be540000-0x00000000be86efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000be86f000-0x00000000be9dcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be9dd000-0x00000000bf08bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf08c000-0x00000000bf7a2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf7a3000-0x00000000bf7fefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved                                                                       
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved                                                                       
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved                                                                       
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved                                                                       
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved                                                                       
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013effffff] usable                                                                         
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0xbecdd000  ACPI=0xbecdd000  SMBIOS=0xbf6ce000  SMBIOS 3.0=0xbf6cd000  MPS=0xfc9f0  ESRT=0xbd258918
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. H110M-DS2/H110M-DS2-CF, BIOS F21 06/09/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc70-0x000fcc7f] mapped at [ffff9540c00fcc70]
[    0.000000] esrt: Reserving ESRT space from 0x00000000bd258918 to 0x00000000bd258950.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9540c0095000] 95000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x6092c000, 0x6092cfff] PGTABLE
[    0.000000] BRK [0x6092d000, 0x6092dfff] PGTABLE
[    0.000000] BRK [0x6092e000, 0x6092efff] PGTABLE
[    0.000000] BRK [0x6092f000, 0x6092ffff] PGTABLE
[    0.000000] BRK [0x60930000, 0x60930fff] PGTABLE
[    0.000000] BRK [0x60931000, 0x60931fff] PGTABLE
[    0.000000] BRK [0x60932000, 0x60932fff] PGTABLE
[    0.000000] BRK [0x60933000, 0x60933fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x32080000-0x35037fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000BECDD000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BECDD0A0 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BED05690 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BECDD200 02848C (v02 ALASKA A M I    01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x00000000BF08BC40 000040
[    0.000000] ACPI: APIC 0x00000000BED057A8 000068 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000BED05810 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BED05858 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: FIDT 0x00000000BED05898 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BED05938 003154 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x00000000BED08A90 002544 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.000000] ACPI: HPET 0x00000000BED0AFD8 000038 (v01 INTEL  SKL      00000001 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000BED0B010 000E3B (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x00000000BED0BE50 002AD7 (v02 INTEL  xh_rvp10 00000000 INTL 20160422)
[    0.000000] ACPI: UEFI 0x00000000BED0E928 000042 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: SSDT 0x00000000BED0E970 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x00000000BED0F850 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: WSMT 0x00000000BED0F8E8 000028 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000BED0F910 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x00000000BED0FBB0 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x00000000BED12BB8 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x00000000BED12BF0 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: BGRT 0x00000000BED12C48 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DMAR 0x00000000BED12C80 000070 (v01 INTEL  SKL      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13efd3000-0x13effdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b7a03fff]
[    0.000000]   node   0: [mem 0x00000000b7a06000-0x00000000be53ffff]
[    0.000000]   node   0: [mem 0x00000000be86f000-0x00000000be9dcfff]
[    0.000000]   node   0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[    0.000000] On node 0 totalpages: 1037898
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 27 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12123 pages used for memmap
[    0.000000]   DMA32 zone: 775853 pages, LIFO batch:31
[    0.000000]   Normal zone: 4032 pages used for memmap
[    0.000000]   Normal zone: 258048 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7a04000-0xb7a04fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7a05000-0xb7a05fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe540000-0xbe86efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe9dd000-0xbf08bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf08c000-0xbf7a2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7a3000-0xbf7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff9541fec00000 s146584 r8192 d29544 u1048576
[    0.000000] pcpu-alloc: s146584 r8192 d29544 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1021652
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-45-generic.efi.signed root=UUID=a845013a-99c1-466e-ad97-bcca3cc51e4d ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3814568K/4151592K available (12300K kernel code, 2481K rwdata, 4012K rodata, 2368K init, 2372K bss, 337024K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37875 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 524544, nr_irqs: 512, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.004000] tsc: Detected 3300.000 MHz processor
[    0.004000] tsc: Detected 3312.000 MHz TSC
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.00 BogoMIPS (lpj=13248000)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.030253] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.030839] Security Framework initialized
[    0.030840] Yama: becoming mindful.
[    0.030852] AppArmor: AppArmor initialized
[    0.031520] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.031856] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.031870] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.031881] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.032042] CPU: Physical Processor ID: 0
[    0.032043] CPU: Processor Core ID: 0
[    0.032046] FEATURE SPEC_CTRL Present
[    0.032048] mce: CPU supports 8 MCE banks
[    0.032055] CPU0: Thermal monitoring enabled (TM1)
[    0.032066] process: using mwait in idle threads
[    0.032068] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.032068] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.032069] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.032070] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
[    0.032070] Spectre V2 mitigation: Retpoline compiled kernel.  Defaulting IBRS to disabled
[    0.032071] Spectre V2 mitigation: Filling RSB on context switch
[    0.032071] Speculative Store Bypass: Vulnerable
[    0.032457] Freeing SMP alternatives memory: 36K
[    0.035510] smpboot: Max logical packages: 1
[    0.035514] DMAR: Host address width 39
[    0.035515] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.035520] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.035521] DMAR: RMRR base: 0x000000be7fd000 end: 0x000000be81cfff
[    0.035523] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed90000 IOMMU 0
[    0.035523] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.035524] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.036887] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.036887] x2apic enabled
[    0.036897] Switched APIC routing to cluster x2apic.
[    0.040875] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080589] TSC deadline timer enabled
[    0.080593] smpboot: CPU0: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.080637] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.080659] ... version:                4
[    0.080659] ... bit width:              48
[    0.080659] ... generic registers:      8
[    0.080660] ... value mask:             0000ffffffffffff
[    0.080660] ... max period:             00007fffffffffff
[    0.080661] ... fixed-purpose events:   3
[    0.080661] ... event mask:             00000007000000ff
[    0.080690] Hierarchical SRCU implementation.
[    0.081252] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.081262] smp: Bringing up secondary CPUs ...
[    0.081308] x86: Booting SMP configuration:
[    0.081309] .... node  #0, CPUs:      #1
[    0.082521] smp: Brought up 1 node, 2 CPUs
[    0.082521] smpboot: Total of 2 processors activated (13248.00 BogoMIPS)
[    0.082521] devtmpfs: initialized
[    0.082521] x86/mm: Memory block size: 128MB
[    0.082521] evm: security.selinux
[    0.082521] evm: security.SMACK64
[    0.082521] evm: security.SMACK64EXEC
[    0.082521] evm: security.SMACK64TRANSMUTE
[    0.082521] evm: security.SMACK64MMAP
[    0.082521] evm: security.ima
[    0.082521] evm: security.capability
[    0.082521] PM: Registering ACPI NVS region [mem 0xb7a04000-0xb7a04fff] (4096 bytes)
[    0.082521] PM: Registering ACPI NVS region [mem 0xbe9dd000-0xbf08bfff] (7008256 bytes)
[    0.082521] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.082521] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.082521] pinctrl core: initialized pinctrl subsystem
[    0.082521] RTC time: 18:25:10, date: 08/06/18
[    0.082521] NET: Registered protocol family 16
[    0.084007] cpuidle: using governor ladder
[    0.084007] cpuidle: using governor menu
[    0.084007] PCCT header not found.
[    0.084029] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.084030] ACPI: bus type PCI registered
[    0.084030] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.084072] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.084073] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.084078] PCI: Using configuration type 1 for base access
[    0.084686] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.084686] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.084686] ACPI: Added _OSI(Module Device)
[    0.084686] ACPI: Added _OSI(Processor Device)
[    0.084686] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.084686] ACPI: Added _OSI(Processor Aggregator Device)
[    0.084879] ACPI: Executed 35 blocks of module-level executable AML code
[    0.094304] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.097200] ACPI: Dynamic OEM Table Load:
[    0.097209] ACPI: SSDT 0xFFFF9541F97FF000 0006D5 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.097375] ACPI: Executed 1 blocks of module-level executable AML code
[    0.097423] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.098432] ACPI: Dynamic OEM Table Load:
[    0.098436] ACPI: SSDT 0xFFFF9541F96EE400 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.098590] ACPI: Executed 1 blocks of module-level executable AML code
[    0.098884] ACPI: Dynamic OEM Table Load:
[    0.098888] ACPI: SSDT 0xFFFF9541F97FF800 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.099195] ACPI: Executed 1 blocks of module-level executable AML code
[    0.099334] ACPI: Dynamic OEM Table Load:
[    0.099337] ACPI: SSDT 0xFFFF9541F97EDA00 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.099489] ACPI: Executed 1 blocks of module-level executable AML code
[    0.100989] ACPI: Interpreter enabled
[    0.101020] ACPI: (supports S0 S3 S4 S5)
[    0.101021] ACPI: Using IOAPIC for interrupt routing
[    0.101050] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.101798] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.103694] ACPI: Power Resource [PG00] (on)
[    0.103975] ACPI: Power Resource [PG01] (on)
[    0.104249] ACPI: Power Resource [PG02] (on)
[    0.106842] ACPI: Power Resource [WRST] (on)
[    0.107091] ACPI: Power Resource [WRST] (on)
[    0.107336] ACPI: Power Resource [WRST] (on)
[    0.107579] ACPI: Power Resource [WRST] (on)
[    0.107823] ACPI: Power Resource [WRST] (on)
[    0.108069] ACPI: Power Resource [WRST] (on)
[    0.108313] ACPI: Power Resource [WRST] (on)
[    0.108556] ACPI: Power Resource [WRST] (on)
[    0.108799] ACPI: Power Resource [WRST] (on)
[    0.109044] ACPI: Power Resource [WRST] (on)
[    0.109307] ACPI: Power Resource [WRST] (on)
[    0.109553] ACPI: Power Resource [WRST] (on)
[    0.109798] ACPI: Power Resource [WRST] (on)
[    0.110042] ACPI: Power Resource [WRST] (on)
[    0.110285] ACPI: Power Resource [WRST] (on)
[    0.110531] ACPI: Power Resource [WRST] (on)
[    0.110775] ACPI: Power Resource [WRST] (on)
[    0.111708] ACPI: Power Resource [WRST] (on)
[    0.111956] ACPI: Power Resource [WRST] (on)
[    0.112208] ACPI: Power Resource [WRST] (on)
[    0.123090] ACPI: Power Resource [FN00] (off)
[    0.123149] ACPI: Power Resource [FN01] (off)
[    0.123207] ACPI: Power Resource [FN02] (off)
[    0.123267] ACPI: Power Resource [FN03] (off)
[    0.123325] ACPI: Power Resource [FN04] (off)
[    0.124245] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.124250] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.124274] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.124798] PCI host bridge to bus 0000:00
[    0.124800] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.124801] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.124802] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.124803] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff window]
[    0.124803] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.124805] pci_bus 0000:00: root bus resource [bus 00-7e]
[    0.124811] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
[    0.125061] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.125093] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.125286] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.125306] pci 0000:00:14.0: reg 0x10: [mem 0xeff10000-0xeff1ffff 64bit]
[    0.125368] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.125535] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.125560] pci 0000:00:16.0: reg 0x10: [mem 0xeff2d000-0xeff2dfff 64bit]
[    0.125623] pci 0000:00:16.0: PME# supported from D3hot
[    0.125742] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.125758] pci 0000:00:17.0: reg 0x10: [mem 0xeff28000-0xeff29fff]
[    0.125765] pci 0000:00:17.0: reg 0x14: [mem 0xeff2c000-0xeff2c0ff]
[    0.125772] pci 0000:00:17.0: reg 0x18: [io  0xf050-0xf057]
[    0.125778] pci 0000:00:17.0: reg 0x1c: [io  0xf040-0xf043]
[    0.125785] pci 0000:00:17.0: reg 0x20: [io  0xf020-0xf03f]
[    0.125791] pci 0000:00:17.0: reg 0x24: [mem 0xeff2b000-0xeff2b7ff]
[    0.125827] pci 0000:00:17.0: PME# supported from D3hot
[    0.125935] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[    0.125994] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.126124] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
[    0.126183] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.126299] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
[    0.126357] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.126473] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
[    0.126531] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.126647] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.126712] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.126829] pci 0000:00:1d.1: [8086:a119] type 01 class 0x060400
[    0.126894] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
[    0.127033] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
[    0.127232] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.127245] pci 0000:00:1f.2: reg 0x10: [mem 0xeff24000-0xeff27fff]
[    0.127378] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.127402] pci 0000:00:1f.3: reg 0x10: [mem 0xeff20000-0xeff23fff 64bit]
[    0.127426] pci 0000:00:1f.3: reg 0x20: [mem 0xeff00000-0xeff0ffff 64bit]
[    0.127470] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.127619] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.127678] pci 0000:00:1f.4: reg 0x10: [mem 0xeff2a000-0xeff2a0ff 64bit]
[    0.127746] pci 0000:00:1f.4: reg 0x20: [io  0xf000-0xf01f]
[    0.127940] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
[    0.127958] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.127968] pci 0000:01:00.0: reg 0x18: [mem 0xefe20000-0xefe3ffff 64bit]
[    0.127974] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.127985] pci 0000:01:00.0: reg 0x30: [mem 0xefe00000-0xefe1ffff pref]
[    0.127998] pci 0000:01:00.0: BAR 0: assigned to efifb
[    0.128026] pci 0000:01:00.0: supports D1 D2
[    0.128066] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
[    0.128084] pci 0000:01:00.1: reg 0x10: [mem 0xefe40000-0xefe43fff 64bit]
[    0.128148] pci 0000:01:00.1: supports D1 D2
[    0.140033] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.140039] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.140045] pci 0000:00:01.0:   bridge window [mem 0xefe00000-0xefefffff]
[    0.140067] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.140155] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.140182] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.140207] pci 0000:02:00.0: reg 0x18: [mem 0xefd00000-0xefd00fff 64bit]
[    0.140222] pci 0000:02:00.0: reg 0x20: [mem 0xe0000000-0xe0003fff 64bit pref]
[    0.140311] pci 0000:02:00.0: supports D1 D2
[    0.140312] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.140414] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.140417] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.140419] pci 0000:00:1c.0:   bridge window [mem 0xefd00000-0xefdfffff]
[    0.140422] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.140489] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.140571] pci 0000:04:00.0: [1106:3483] type 00 class 0x0c0330
[    0.140594] pci 0000:04:00.0: reg 0x10: [mem 0xefc00000-0xefc00fff 64bit]
[    0.140678] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.140751] pci 0000:00:1c.6: PCI bridge to [bus 04]
[    0.140755] pci 0000:00:1c.6:   bridge window [mem 0xefc00000-0xefcfffff]
[    0.140824] pci 0000:00:1c.7: PCI bridge to [bus 05]
[    0.140896] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.140969] pci 0000:00:1d.1: PCI bridge to [bus 07]
[    0.142711] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142749] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.142786] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142823] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142859] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142896] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142933] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.142969] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.143502] SCSI subsystem initialized
[    0.143526] libata version 3.00 loaded.
[    0.143526] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.143526] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.143526] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.143526] vgaarb: loaded
[    0.143526] ACPI: bus type USB registered
[    0.143526] usbcore: registered new interface driver usbfs
[    0.143526] usbcore: registered new interface driver hub
[    0.143526] usbcore: registered new device driver usb
[    0.143526] EDAC MC: Ver: 3.0.0
[    0.143526] Registered efivars operations
[    0.161664] PCI: Using ACPI for IRQ routing
[    0.174969] PCI: pci_cache_line_size set to 64 bytes
[    0.175014] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.175015] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.175016] e820: reserve RAM buffer [mem 0xb7a04000-0xb7ffffff]
[    0.175016] e820: reserve RAM buffer [mem 0xbe540000-0xbfffffff]
[    0.175017] e820: reserve RAM buffer [mem 0xbe9dd000-0xbfffffff]
[    0.175018] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.175019] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[    0.175071] NetLabel: Initializing
[    0.175072] NetLabel:  domain hash size = 128
[    0.175072] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.175081] NetLabel:  unlabeled traffic allowed by default
[    0.175090] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.175090] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.177025] clocksource: Switched to clocksource hpet
[    0.182495] VFS: Disk quotas dquot_6.6.0
[    0.182507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.182570] AppArmor: AppArmor Filesystem Enabled
[    0.182597] pnp: PnP ACPI init
[    0.182826] system 00:00: [io  0x0a00-0x0a2f] has been reserved
[    0.182828] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.182829] system 00:00: [io  0x0a40-0x0a4f] has been reserved
[    0.182832] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.183188] pnp 00:01: [dma 0 disabled]
[    0.183293] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.183602] pnp 00:02: [dma 0 disabled]
[    0.183632] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.183732] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.183733] system 00:03: [io  0xffff] has been reserved
[    0.183734] system 00:03: [io  0xffff] has been reserved
[    0.183736] system 00:03: [io  0xffff] has been reserved
[    0.183737] system 00:03: [io  0x1800-0x18fe] has been reserved
[    0.183738] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.183739] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.183806] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.183807] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.183823] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.183847] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.183848] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.184040] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.184041] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.184042] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.184043] system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.184044] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.184045] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.184046] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.184048] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.184049] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.184050] system 00:07: [mem 0xeffe0000-0xefffffff] has been reserved
[    0.184052] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.184080] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.184081] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.184082] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.184083] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.184084] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.184085] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.184086] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.184088] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.184313] system 00:09: [io  0xff00-0xfffe] has been reserved
[    0.184314] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185163] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.185165] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.185166] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.185167] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185800] pnp: PnP ACPI: found 11 devices
[    0.193357] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.193393] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.193395] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.193397] pci 0000:00:01.0:   bridge window [mem 0xefe00000-0xefefffff]
[    0.193399] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.193401] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.193403] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.193406] pci 0000:00:1c.0:   bridge window [mem 0xefd00000-0xefdfffff]
[    0.193408] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.193412] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.193419] pci 0000:00:1c.6: PCI bridge to [bus 04]
[    0.193422] pci 0000:00:1c.6:   bridge window [mem 0xefc00000-0xefcfffff]
[    0.193427] pci 0000:00:1c.7: PCI bridge to [bus 05]
[    0.193434] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.193442] pci 0000:00:1d.1: PCI bridge to [bus 07]
[    0.193450] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.193451] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.193452] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.193453] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xefffffff window]
[    0.193454] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.193455] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.193456] pci_bus 0000:01: resource 1 [mem 0xefe00000-0xefefffff]
[    0.193457] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.193458] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.193459] pci_bus 0000:02: resource 1 [mem 0xefd00000-0xefdfffff]
[    0.193460] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.193461] pci_bus 0000:04: resource 1 [mem 0xefc00000-0xefcfffff]
[    0.193566] NET: Registered protocol family 2
[    0.193657] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.193705] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.193779] TCP: Hash tables configured (established 32768 bind 32768)
[    0.193798] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.193810] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.193839] NET: Registered protocol family 1
[    0.194607] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.194757] PCI: CLS 64 bytes, default 64
[    0.194782] Unpacking initramfs...
[    0.723804] Freeing initrd memory: 48864K
[    0.723879] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.723881] software IO TLB [mem 0xb24d6000-0xb64d6000] (64MB) mapped at [ffff9541724d6000-ffff9541764d5fff]
[    0.724025] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd93f9e57, max_idle_ns: 440795263784 ns
[    0.724067] Scanning for low memory corruption every 60 seconds
[    0.724313] audit: initializing netlink subsys (disabled)
[    0.724361] audit: type=2000 audit(1533579910.724:1): state=initialized audit_enabled=0 res=1
[    0.724600] Initialise system trusted keyrings
[    0.724608] Key type blacklist registered
[    0.724645] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.725350] zbud: loaded
[    0.725691] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.725793] fuse init (API version 7.26)
[    0.727989] Key type asymmetric registered
[    0.727990] Asymmetric key parser 'x509' registered
[    0.728027] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.728069] io scheduler noop registered
[    0.728069] io scheduler deadline registered
[    0.728085] io scheduler cfq registered (default)
[    0.728885] efifb: probing for efifb
[    0.728892] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
[    0.728893] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.728893] efifb: scrolling: redraw
[    0.728894] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.728955] Console: switching to colour frame buffer device 128x48
[    0.728965] fb0: EFI VGA frame buffer device
[    0.728969] intel_idle: MWAIT substates: 0x142120
[    0.728970] intel_idle: v0.4.1 model 0x5E
[    0.729030] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.729130] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.729139] ACPI: Sleep Button [SLPB]
[    0.729159] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.729165] ACPI: Power Button [PWRB]
[    0.729184] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.729233] ACPI: Power Button [PWRF]
[    0.792715] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.852450] thermal LNXTHERM:00: registered as thermal_zone0
[    0.852451] ACPI: Thermal Zone [TZ00] (28 C)
[    0.852569] thermal LNXTHERM:01: registered as thermal_zone1
[    0.852570] ACPI: Thermal Zone [TZ01] (30 C)
[    0.852619] GHES: HEST is not enabled!
[    0.852724] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.873552] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.876338] Linux agpgart interface v0.103
[    0.877422] loop: module loaded
[    0.877517] libphy: Fixed MDIO Bus: probed
[    0.877518] tun: Universal TUN/TAP device driver, 1.6
[    0.877566] PPP generic driver version 2.4.2
[    0.877620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.877622] ehci-pci: EHCI PCI platform driver
[    0.877627] ehci-platform: EHCI generic platform driver
[    0.877632] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.877633] ohci-pci: OHCI PCI platform driver
[    0.877638] ohci-platform: OHCI generic platform driver
[    0.877642] uhci_hcd: USB Universal Host Controller Interface driver
[    0.877772] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.877776] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.878864] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.878868] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.878945] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.878946] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.878947] usb usb1: Product: xHCI Host Controller
[    0.878948] usb usb1: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    0.878948] usb usb1: SerialNumber: 0000:00:14.0
[    0.879039] hub 1-0:1.0: USB hub found
[    0.879050] hub 1-0:1.0: 10 ports detected
[    0.879737] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.879740] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.879761] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.879762] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.879763] usb usb2: Product: xHCI Host Controller
[    0.879764] usb usb2: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    0.879765] usb usb2: SerialNumber: 0000:00:14.0
[    0.879847] hub 2-0:1.0: USB hub found
[    0.879853] hub 2-0:1.0: 4 ports detected
[    0.880372] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.880375] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.880467] xhci_hcd 0000:04:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
[    0.880528] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.880529] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.880530] usb usb3: Product: xHCI Host Controller
[    0.880531] usb usb3: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    0.880532] usb usb3: SerialNumber: 0000:04:00.0
[    0.880647] hub 3-0:1.0: USB hub found
[    0.880650] hub 3-0:1.0: 1 port detected
[    0.880686] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.880688] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.880697] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.880707] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.880708] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.880709] usb usb4: Product: xHCI Host Controller
[    0.880710] usb usb4: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    0.880711] usb usb4: SerialNumber: 0000:04:00.0
[    0.880797] hub 4-0:1.0: USB hub found
[    0.880803] hub 4-0:1.0: 4 ports detected
[    0.880884] i8042: PNP: No PS/2 controller found.
[    0.881041] mousedev: PS/2 mouse device common for all mice
[    0.881314] rtc_cmos 00:05: RTC can wake from S4
[    0.881700] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.881780] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.881783] i2c /dev entries driver
[    0.881817] device-mapper: uevent: version 1.0.3
[    0.881849] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.881851] intel_pstate: Intel P-state driver initializing
[    0.881984] intel_pstate: HWP enabled
[    0.882017] ledtrig-cpu: registered to indicate activity on CPUs
[    0.882019] EFI Variables Facility v0.08 2004-May-17
[    0.903815] NET: Registered protocol family 10
[    0.907499] Segment Routing with IPv6
[    0.907513] NET: Registered protocol family 17
[    0.907519] Key type dns_resolver registered
[    0.907689] RAS: Correctable Errors collector initialized.
[    0.907712] microcode: sig=0x506e3, pf=0x2, revision=0xc2
[    0.907768] microcode: Microcode Update Driver: v2.2.
[    0.907858] sched_clock: Marking stable (907766280, 0)->(906428298, 1337982)
[    0.908135] registered taskstats version 1
[    0.908141] Loading compiled-in X.509 certificates
[    0.910167] Loaded X.509 cert 'Build time autogenerated kernel key: fec222083a1a40f2051f2b073ec28e5cb659a232'
[    0.910645] Couldn't get size: 0x800000000000000e
[    0.910647] MODSIGN: Couldn't get UEFI db list
[    0.912994] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[    0.913232] Couldn't get size: 0x800000000000000e
[    0.913233] MODSIGN: Couldn't get UEFI dbx list
[    0.913247] zswap: loaded using pool lzo/zbud
[    0.916542] Key type big_key registered
[    0.916545] Key type trusted registered
[    0.918082] Key type encrypted registered
[    0.918084] AppArmor: AppArmor sha1 policy hashing enabled
[    0.918086] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.918100] evm: HMAC attrs: 0x1
[    0.918980]   Magic number: 14:745:442
[    0.919173] rtc_cmos 00:05: setting system clock to 2018-08-06 18:25:11 UTC (1533579911)
[    0.919218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.919219] EDD information not available.
[    0.919246] PM: Hibernation image not present or could not be loaded.
[    0.920587] Freeing unused kernel memory: 2368K
[    0.940312] Write protecting the kernel read-only data: 18432k
[    0.940679] Freeing unused kernel memory: 2024K
[    0.940867] Freeing unused kernel memory: 84K
[    0.942117] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.942117] x86/mm: Checking user space page tables
[    0.943240] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.994484] hidraw: raw HID events driver (C) Jiri Kosina
[    1.037395] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.037401] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.038424] ahci 0000:00:17.0: version 3.0
[    1.048733] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    1.048735] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[    1.052945] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffa087c067d000, e0:d5:5e:13:fd:c1, XID 0c000800 IRQ 124
[    1.052946] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.059873] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.084297] [drm] radeon kernel modesetting enabled.
[    1.085201] scsi host0: ahci
[    1.085376] scsi host1: ahci
[    1.085528] scsi host2: ahci
[    1.085675] scsi host3: ahci
[    1.085700] ata1: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b100 irq 123
[    1.085701] ata2: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b180 irq 123
[    1.085703] ata3: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b200 irq 123
[    1.085704] ata4: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b280 irq 123
[    1.085891] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.085891] AMD IOMMUv2 functionality not available on this system
[    1.088085] CRAT table not found
[    1.088085] Finished initializing topology ret=0
[    1.088092] kfd kfd: Initialized module
[    1.088216] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    1.088216] fb: switching to radeondrmfb from EFI VGA
[    1.088231] Console: switching to colour dummy device 80x25
[    1.088525] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1043:0x03DA 0x00).
[    1.088579] ATOM BIOS: 6779.13.12.0.0.AS02
[    1.089095] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.089096] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    1.089098] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.089099] [drm] RAM width 64bits DDR
[    1.089131] [TTM] Zone  kernel: Available graphics memory: 1998878 kiB
[    1.089132] [TTM] Initializing pool allocator
[    1.089134] [TTM] Initializing DMA pool allocator
[    1.089146] [drm] radeon: 1024M of VRAM memory ready
[    1.089146] [drm] radeon: 1024M of GTT memory ready.
[    1.089151] [drm] Loading CAICOS Microcode
[    1.089197] [drm] Internal thermal controller without fan control
[    1.093460] [drm] radeon: dpm initialized
[    1.093512] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.093999] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    1.105993] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[    1.106113] radeon 0000:01:00.0: WB enabled
[    1.106115] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff9541ef630c00
[    1.106116] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff9541ef630c0c
[    1.106859] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa087c1032118
[    1.106860] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.106860] [drm] Driver supports precise vblank timestamp query.
[    1.106861] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.106893] radeon 0000:01:00.0: radeon: using MSI.
[    1.106917] [drm] radeon: irq initialized.
[    1.123292] [drm] ring test on 0 succeeded in 3 usecs
[    1.123301] [drm] ring test on 3 succeeded in 6 usecs
[    1.204052] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    1.299074] [drm] ring test on 5 succeeded in 1 usecs
[    1.299081] [drm] UVD initialized successfully.
[    1.299297] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.299381] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.356056] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.399037] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.399054] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.399067] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.400035] ata1.00: ATA-8: ST3500312CS, SS16, max UDMA/133
[    1.400037] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.400154] ata4.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
[    1.401216] ata1.00: configured for UDMA/133
[    1.401378] scsi 0:0:0:0: Direct-Access     ATA      ST3500312CS      SS16 PQ: 0 ANSI: 5
[    1.401561] ata4.00: configured for UDMA/133
[    1.403017] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.403908] ata3.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133
[    1.403909] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.408836] ata3.00: configured for UDMA/133
[    1.427667] ata2.00: ATA-8: ST3320613AS, SD22, max UDMA/133
[    1.427668] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.469673] ata2.00: configured for UDMA/133
[    1.470538] usb 1-3: New USB device found, idVendor=03f0, idProduct=3d17
[    1.470540] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.470541] usb 1-3: Product: HP LaserJet P1005
[    1.470542] usb 1-3: Manufacturer: Hewlett-Packard
[    1.470543] usb 1-3: SerialNumber: BC1GKXP
[    1.488496] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.488510] sd 0:0:0:0: [sda] Write Protect is off
[    1.488511] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.488532] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.488720] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.489112] scsi 1:0:0:0: Direct-Access     ATA      ST3320613AS      SD22 PQ: 0 ANSI: 5
[    1.498309] usb 3-1: New USB device found, idVendor=2109, idProduct=3431
[    1.498311] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.498312] usb 3-1: Product: USB2.0 Hub
[    1.498838] hub 3-1:1.0: USB hub found
[    1.499135] hub 3-1:1.0: 4 ports detected
[    1.528246] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.528289] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.528302] sd 1:0:0:0: [sdb] Write Protect is off
[    1.528304] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.528325] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.528434] scsi 2:0:0:0: Direct-Access     ATA      ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5
[    1.541197]  sda: sda1 sda2 sda3 sda4
[    1.542093] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.560762]  sdb: sdb1
[    1.561442] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.568411] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.568609] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.568611] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[    1.568636] sd 2:0:0:0: [sdc] Write Protect is off
[    1.568637] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.568660] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.569323] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24D5MT       1.00 PQ: 0 ANSI: 5
[    1.588114] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.595530] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.595531] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.595626] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.595697] sr 3:0:0:0: Attached scsi generic sg3 type 5
[    1.624127]  sdc: sdc1
[    1.624968] sd 2:0:0:0: [sdc] Attached SCSI disk
[    1.756321] clocksource: Switched to clocksource tsc
[    1.907713] usb 1-5: New USB device found, idVendor=050d, idProduct=705a
[    1.907719] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.907723] usb 1-5: Product: Belkin 54g USB Network Adapter
[    1.907727] usb 1-5: Manufacturer: Belkin
[    1.980143] [drm] ib test on ring 5 succeeded
[    1.981112] [drm] Radeon Display Connectors
[    1.981112] [drm] Connector 0:
[    1.981113] [drm]   HDMI-A-1
[    1.981113] [drm]   HPD1
[    1.981114] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    1.981114] [drm]   Encoders:
[    1.981115] [drm]     DFP1: INTERNAL_UNIPHY1
[    1.981115] [drm] Connector 1:
[    1.981116] [drm]   DVI-D-1
[    1.981116] [drm]   HPD4
[    1.981117] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[    1.981117] [drm]   Encoders:
[    1.981118] [drm]     DFP2: INTERNAL_UNIPHY
[    1.981118] [drm] Connector 2:
[    1.981118] [drm]   VGA-1
[    1.981119] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    1.981119] [drm]   Encoders:
[    1.981120] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.028010] usb 1-6: new low-speed USB device number 4 using xhci_hcd
[    2.038628] [drm] fb mappable at 0xD0363000
[    2.038628] [drm] vram apper at 0xD0000000
[    2.038629] [drm] size 5242880
[    2.038629] [drm] fb depth is 24
[    2.038630] [drm]    pitch is 5120
[    2.038690] fbcon: radeondrmfb (fb0) is primary device
[    2.038730] Console: switching to colour frame buffer device 160x64
[    2.038743] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.052209] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[    2.174534] usb 1-6: New USB device found, idVendor=1c4f, idProduct=0002
[    2.174536] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.174537] usb 1-6: Product: USB Keyboard
[    2.174538] usb 1-6: Manufacturer: SIGMACHIP
[    2.181201] usbcore: registered new interface driver usbhid
[    2.181202] usbhid: USB HID core driver
[    2.182164] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1C4F:0002.0001/input/input3
[    2.240539] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-6/input0
[    2.240679] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:1C4F:0002.0002/input/input4
[    2.292286] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[    2.300539] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-6/input1
[    2.434046] usb 1-8: New USB device found, idVendor=046d, idProduct=c534
[    2.434048] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.434049] usb 1-8: Product: USB Receiver
[    2.434050] usb 1-8: Manufacturer: Logitech
[    2.436177] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C534.0003/input/input5
[    2.496080] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-8/input0
[    2.497955] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C534.0004/input/input6
[    2.556361] hid-generic 0003:046D:C534.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-8/input1
[    2.669156] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.397325] random: crng init done
[    4.357813] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.376119] systemd[1]: Detected architecture x86-64.
[    4.387270] systemd[1]: Set hostname to <dimitris-H110M-DS2>.
[    5.842486] systemd[1]: Reached target Encrypted Volumes.
[    5.842589] systemd[1]: Listening on Journal Socket.
[    5.842666] systemd[1]: Created slice User and Session Slice.
[    5.842674] systemd[1]: Reached target User and Group Name Lookups.
[    5.842729] systemd[1]: Listening on Journal Audit Socket.
[    5.842757] systemd[1]: Listening on udev Control Socket.
[    5.842777] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.386292] lp: driver loaded but no devices found
[    6.429652] ppdev: user-space parallel port driver
[    6.434562] parport_pc 00:01: reported by Plug and Play ACPI
[    6.434606] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
[    6.536181] lp0: using parport0 (interrupt-driven).
[   14.501863] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   14.521899] systemd-journald[295]: Received request to flush runtime journal from PID 1
[   14.600732] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.625512] Bluetooth: Core ver 2.22
[   14.625523] NET: Registered protocol family 31
[   14.625524] Bluetooth: HCI device and connection manager initialized
[   14.625526] Bluetooth: HCI socket layer initialized
[   14.625527] Bluetooth: L2CAP socket layer initialized
[   14.625530] Bluetooth: SCO socket layer initialized
[   14.632745] Bluetooth: HCI UART driver ver 2.3
[   14.632746] Bluetooth: HCI UART protocol H4 registered
[   14.632747] Bluetooth: HCI UART protocol BCSP registered
[   14.632760] Bluetooth: HCI UART protocol LL registered
[   14.632760] Bluetooth: HCI UART protocol ATH3K registered
[   14.632761] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   14.632777] Bluetooth: HCI UART protocol Intel registered
[   14.632783] Bluetooth: HCI UART protocol Broadcom registered
[   14.632783] Bluetooth: HCI UART protocol QCA registered
[   14.632784] Bluetooth: HCI UART protocol AG6XX registered
[   14.632784] Bluetooth: HCI UART protocol Marvell registered
[   14.667691] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   14.716873] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   14.717316] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   14.728339] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[   14.731194] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   14.731196] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.731197] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   14.731198] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.731199] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[   14.731200] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.731201] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   14.731202] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   14.731203] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   14.745359] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[   14.745389] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[   14.745415] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[   14.745445] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   14.745471] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   14.819387] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   14.819388] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   14.819389] RAPL PMU: hw unit of domain package 2^-14 Joules
[   14.819389] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   14.819390] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   14.819390] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   14.825631] SSE version of gcm_enc/dec engaged.
[   14.849408] intel_rapl: Found RAPL domain package
[   14.849409] intel_rapl: Found RAPL domain core
[   14.849410] intel_rapl: Found RAPL domain dram
[   16.072331] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[   16.542513] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
[   16.546405] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   16.546853] usbcore: registered new interface driver rt73usb
[   16.548816] rt73usb 1-5:1.0 wlx001cdf5832a5: renamed from wlan0
[   17.100815] Adding 7819260k swap on /dev/sda4.  Priority:-1 extents:1 across:7819260k FS
[   17.460687] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   17.816539] audit: type=1400 audit(1533579928.397:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=793 comm="apparmor_parser"
[   17.816541] audit: type=1400 audit(1533579928.397:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=793 comm="apparmor_parser"
[   17.816542] audit: type=1400 audit(1533579928.397:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=793 comm="apparmor_parser"
[   17.816543] audit: type=1400 audit(1533579928.397:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=793 comm="apparmor_parser"
[   17.822080] audit: type=1400 audit(1533579928.402:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=794 comm="apparmor_parser"
[   17.822082] audit: type=1400 audit(1533579928.402:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=794 comm="apparmor_parser"
[   17.822083] audit: type=1400 audit(1533579928.402:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=794 comm="apparmor_parser"
[   17.822085] audit: type=1400 audit(1533579928.402:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=794 comm="apparmor_parser"
[   17.822087] audit: type=1400 audit(1533579928.402:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=794 comm="apparmor_parser"
[   17.822088] audit: type=1400 audit(1533579928.402:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=794 comm="apparmor_parser"
[   21.938857] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[   21.938890] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
[   22.063401] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
[   22.117444] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[   22.119763] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   22.190510] r8169 0000:02:00.0 enp2s0: link down
[   22.190560] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   22.419541] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[   27.058199] vboxdrv: loading out-of-tree module taints kernel.
[   27.058320] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   27.063890] vboxdrv: Found 2 processor cores
[   27.086380] vboxdrv: TSC mode is Invariant, tentative frequency 3311999574 Hz
[   27.086381] vboxdrv: Successfully loaded version 5.1.34_Ubuntu (interface 0x002a0000)
[   27.090405] VBoxNetFlt: Successfully started.
[   27.094670] VBoxNetAdp: Successfully started.
[   27.097849] VBoxPciLinuxInit
[   27.099365] vboxpci: IOMMU not found (not registered)
[   27.251974] usblp 1-3:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17
[   27.252074] usbcore: registered new interface driver usblp
[   31.541481] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[   32.290154] usblp1: removed
[   32.291581] usblp 1-3:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17
[   48.178945] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   48.178947] Bluetooth: BNEP filters: protocol multicast
[   48.178950] Bluetooth: BNEP socket layer initialized
[   52.105132] kauditd_printk_skb: 15 callbacks suppressed
[   52.105133] audit: type=1400 audit(1533579962.685:27): apparmor="DENIED" operation="open" profile="/usr/sbin/mysq="/proc/1503/status" pid=1503 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[   52.105135] audit: type=1400 audit(1533579962.685:28): apparmor="DENIED" operation="open" profile="/usr/sbin/mysq="/sys/devices/system/node/" pid=1503 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   52.105181] audit: type=1400 audit(1533579962.686:29): apparmor="DENIED" operation="open" profile="/usr/sbin/mysq="/proc/1503/status" pid=1503 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[   69.756263] wlx001cdf5832a5: authenticate with 72:1d:6a:15:19:7e
[   69.793556] wlx001cdf5832a5: send auth to 72:1d:6a:15:19:7e (try 1/3)
[   69.799396] wlx001cdf5832a5: authenticated
[   69.804017] wlx001cdf5832a5: associate with 72:1d:6a:15:19:7e (try 1/3)
[   69.807273] wlx001cdf5832a5: RX AssocResp from 72:1d:6a:15:19:7e (capab=0x411 status=0 aid=8)
[   69.813806] wlx001cdf5832a5: associated
[   69.813840] IPv6: ADDRCONF(NETDEV_CHANGE): wlx001cdf5832a5: link becomes ready
dimitris@dimitris-H110M-DS2:~$
Γνώσεις ⇛ Linux: Αν μου δώσεις οδηγίες σε τερματικό δεν τρομάζω ┃ Προγραμματισμός: Καθόλου┃ Αγγλικά: Εξαιρετικά
Λειτουργικό : Πάντα την τρέχουσα έκδοση ubuntu/kubuntu 64bit και σε κάποια pc 12.04 32bit
Συσκευές-> Πάρα πολλές, θα στο γράψω ανά περίπτωση.
Άβαταρ μέλους
dim459
superbTUX
superbTUX
 
Δημοσιεύσεις: 3668
Εγγραφή: 15 Φεβ 2009, 19:28
Τοποθεσία: Bόρεια Αττική
Εκτύπωση

Re: Πρόβλημα με ασύρματη usb Belkin

Δημοσίευσηαπό dim459 » 21 Αύγ 2018, 20:33

Προς ενημέρωση, ιδίως ενδιαφερομένων να προβούν σε αγορά κάρτας.
Κατ' αρχάς όσον αφορά στο παραπάνω πρόβλημα, όπως ξαφνικά εμφανίστηκε, κάπως έτσι σχεδόν εξαφανίστηκε, σπανίως πλέον η παραπάνω κάρτα δεν ενεργοποιείται στο boot.
Εν πάση περιπτώσει μιας και έχει υπερβεί τα δέκα χρόνια λειτουργίας, είπα να την αφήσω στην άκρη για backup και να πάρω μια καινούρια κάρτα.
Αποφεύγω να αναφέρω τα καταστήματα αγοράς, πλην όμως αυτή τη φορά θα το κάνω, διότι με εξυπηρέτησαν πέραν των ορίων του αυτονόητου και ειδικώς λαμβανομένου υπ' όψιν ότι τρέχοντας linux η αγορά κάρτας είναι λίγο λαχείο, αφού δεν ξέρεις ποιο ακριβώς τσιπ έχει η συσκευή που αγοράζεις, πριν την βάλεις στον υπολογιστή, η αντιμετώπισή τους ήταν εξαιρετική.
Πήγα λοιπόν στο Πλαίσιο της Κηφισιάς και αρχικώς αγόρασα την TP LINK TL-WN823n V.3.
Θα πρότεινα να την αποφύγετε.
Παρότι ήταν plug and play, η απόδοσή της ήταν απογοητευτική.
Από τις ενδείξεις στο γραφικό περιβάλλον του Kubuntu η παλιά κάρτα έβγαζε signal strength γύρω στο 74% και ταχύτητα σύνδεσης με τον ρούτερ 54 Mbit/sec (ο ρούτερ είναι 150άρης), τα οποία στην πράξη έδιναν ένα download περίπου της τάξης του 2,3 Μbit/sec (η γραμμή είναι vdsl, κλειδώνει στα 50 και είναι πραγματικά).
Η TP LINK έβγαζε signal strength γύρω στο 32% και ταχύτητα σύνδεσης με τον ρούτερ 1 Mbit/sec (εννοείται ότι έπαιξα με όλα τα κανάλια εκπομπής στον ρούτερ, καθώς και τα ασύρματα πρωτόκολλα), τα οποία στην πράξη έδιναν ένα download περίπου της τάξης του 1,3 Μbit/sec.
Η κάρτα αυτή έχει τσιπάκι της realtek και χρειάζεται το module-driver rtl 8192. Είτε δοκίμασα να τον περάσω από ppa, είτε κατεβάζοντας τον από το site της realtek, είτε από github, το αποτέλεσμα ήταν τζίφος, πλην μιας φοράς (δεν θυμάμαι πλέον ποιας από τις πολλές δοκιμές) έβγαζε error και δεν μπορούσε να κάνει build το module για τον πυρήνα που τρέχω (4.15.0-32). Με τα πολλά βάλε-βγάλε ακόμα και τη μια φορά που δεν έβγαλε error, δεν είδα κάποια διαφορά στην απόδοση, παρέμενε χαμηλή.
Αποφάσισα ότι δεν άξιζε πλέον τον κόπο να ασχοληθώ περαιτέρω και αφού είχα προβλέψει να διατηρήσω άθικτη την συσκευασία της, την επέστρεψα στο Πλαίσιο, λέγοντας ακριβώς τι συνέβη, δηλαδή ότι σε σύστημα με linux η κάρτα σερνόταν και επιθυμούσα να την αντικαταστήσω με κάποια άλλη.
Το οποίο και δέχθηκαν άμεσα και αδιαμαρτύρητα και λαμβανομένου υπ' όψιν του ιστορικού, ότι η κάρτα λειτουργούσε, είναι μια εξαιρετική αντιμετώπιση προς τον πελάτη, η οποία αξίζει να τονισθεί.
Μην σκοπεύοντας να δαπανήσω για κάρτα άνω των 20 ευρώ, είπα να δοκιμάσω την Turbo-X WiFi USB Adapter AC600 WLAC-600 Antenna, η οποία είναι 600άρα και έχει εξωτερική κεραιούλα που βιδώνει πάνω στην usb κάρτα.
H καρτούλα είναι αυτή:
Κώδικας: Επιλογή όλων
ID 0bda:0811 Realtek Semiconductor Corp.

και για να λειτουργήσει χρειάζεται τον driver rtl 8812au, ο οποίος υπάρχει μεν στα αποθετήρια της 16.04 αλλά ομοίως έβγαζε error στην εγκατάσταση για τον πυρήνα μου (εννοείται ότι όλα τα απαιτούμενα πακέτα και ιδίως οι linux-headers είναι προεγκατεστημένα). Κάπου διάβασα για bug.
Αρχικώς λοιπόν δεν λειτουργούσε καθόλου, αυτή τη φορά όμως υπήρχε ο σωστός driver στο github
https://github.com/gnab/rtl8812au
Εγκαθιστώντας λοιπόν σύμφωνα με τις οδηγίες του παραπάνω link, η κάρτα λειτούργησε άμεσα, δίνει signal strength 100% και ταχύτητα σύνδεσης με τον ρούτερ 150 Mbit/sec (όσο δηλαδή σηκώνει ο ρούτερ), τα οποία στην πράξη δίνουν ένα download περίπου της τάξης του 5,5 Μbit/sec, όσο δηλαδή και με καλώδιο ethernet.
Μένει λοιπόν να δούμε αν το dkms θα χτίσει σωστά το module όταν αναβαθμιστεί ο πυρήνας ή θα πρέπει να το κάνω και πάλι χειροκίνητα.
Σαν πρόταση αγοράς τώρα ; Χμμμ, σαν απόδοση πετάει. Προφανώς δεν είναι plug and play, αν και θα έπρεπε αφού ο driver υπάρχει στα repos.
Εξαρτάται λοιπόν (προς το παρόν, φαντάζομαι ότι θα επιλυθεί γενικώς, είτε ότι ήδη είναι καλύτερα σε πιο νέα έκδοση του λειτουργικού), από το πόσο τρομάζει κανείς από την "χειροκίνητη" εγκατάσταση του driver.
Αυτά....
Γνώσεις ⇛ Linux: Αν μου δώσεις οδηγίες σε τερματικό δεν τρομάζω ┃ Προγραμματισμός: Καθόλου┃ Αγγλικά: Εξαιρετικά
Λειτουργικό : Πάντα την τρέχουσα έκδοση ubuntu/kubuntu 64bit και σε κάποια pc 12.04 32bit
Συσκευές-> Πάρα πολλές, θα στο γράψω ανά περίπτωση.
Άβαταρ μέλους
dim459
superbTUX
superbTUX
 
Δημοσιεύσεις: 3668
Εγγραφή: 15 Φεβ 2009, 19:28
Τοποθεσία: Bόρεια Αττική
Εκτύπωση

Re: Πρόβλημα με ασύρματη usb Belkin

Δημοσίευσηαπό kosmos890 » 22 Αύγ 2018, 12:25

@dim459
Χρήσιμες οι πληροφορίες που δίνεις.
Εχω το TP-LINK WN723N
Κατά την εκκίνηση του υπολογιστή αργεί να συνδεθεί με το ασύρματο δίκτυο. Η ερώτηση μου στο forum.

Πως μετράς signal strength και ταχύτητα σύνδεσης ?
kosmos890
punkTUX
punkTUX
 
Δημοσιεύσεις: 174
Εγγραφή: 18 Ιαν 2010, 15:13
Τοποθεσία: Λάρισα
Εκτύπωση

Re: Πρόβλημα με ασύρματη usb Belkin

Δημοσίευσηαπό dim459 » 22 Αύγ 2018, 19:27

@kosmos890
Σε γραφικό περιβάλλον KDE, οι πληροφορίες αυτές παρέχονται από το popup του εικονιδίου του network manager, δεν ξέρω τι γίνεται σε άλλα γραφικά περιβάλλοντα.
Σε κάθε περίπτωση μπορείς να τις δεις τρέχοντας την εντολή :
Κώδικας: Επιλογή όλων
iwconfig

Στο δικό μου τα αποτελέσματα έχουν ως εξής :
Κώδικας: Επιλογή όλων
dimitris@dimitris-H110M-DS2:~$ iwconfig
enp2s0    no wireless extensions.

enxe84e0656f16c  IEEE 802.11bgn  ESSID:"Nova-Home"  Nickname:"<WIFI@REALTEK>"
          Mode:Managed  Frequency:2.462 GHz  Access Point: 72:1D:6A:15:19:7E   
          Bit Rate:149.8 Mb/s   Sensitivity:0/0 
          Retry:off   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=100/100  Signal level=100/100  Noise level=0/100
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

lo        no wireless extensions.

Edit-> Είδα πιο προσεκτικά το δικό σου iwconfig, οι τιμές έχω την εντύπωση ότι είναι πολύ καλές.
Η καθυστέρηση δεν έχει να κάνει με το επίπεδο του σήματος.
Δεν το έχω ψάξει, αλλά αναφέρεις ότι η συσκευή σου χρειάζεται τον driver r8188eu.
Απ' ότι βλέπω όμως στο sudo lshw -C network που παραθέτεις, χρησιμοποιείται ο driver r8712u
Κώδικας: Επιλογή όλων
driver=r8712u

Αν έτσι έχουν τα πράγματα, υποθέτω ότι πρέπει να ασχοληθείς κυρίως με τον driver που φορτώνει.
Λάβε υπ' όψιν ότι δεν διεκδικώ δάφνες ειδικού στα περί της δικτύωσης, οπότε τα παραπάνω στα μεταφέρω με κάθε επιφύλαξη, ελπίζω να λάβεις κάποια πιο εμπεριστατωμένη απάντηση.
Γνώσεις ⇛ Linux: Αν μου δώσεις οδηγίες σε τερματικό δεν τρομάζω ┃ Προγραμματισμός: Καθόλου┃ Αγγλικά: Εξαιρετικά
Λειτουργικό : Πάντα την τρέχουσα έκδοση ubuntu/kubuntu 64bit και σε κάποια pc 12.04 32bit
Συσκευές-> Πάρα πολλές, θα στο γράψω ανά περίπτωση.
Άβαταρ μέλους
dim459
superbTUX
superbTUX
 
Δημοσιεύσεις: 3668
Εγγραφή: 15 Φεβ 2009, 19:28
Τοποθεσία: Bόρεια Αττική
Εκτύπωση

Re: Πρόβλημα με ασύρματη usb Belkin

Δημοσίευσηαπό kosmos890 » 22 Αύγ 2018, 20:30

Ευχαριστώ
Ψάχνω μια αξιόπιστη λύση για τα προβλήματα του wireless usb adapter.
Καλογραμμένα θέματα και με τόσες λεπτομέρειες, όπως τα δικά σου δίνουν χρήσιμες πληροφορίες.
kosmos890
punkTUX
punkTUX
 
Δημοσιεύσεις: 174
Εγγραφή: 18 Ιαν 2010, 15:13
Τοποθεσία: Λάρισα
Εκτύπωση

Re: Πρόβλημα με ασύρματη usb Belkin

Δημοσίευσηαπό dim459 » 29 Αύγ 2018, 11:03

dim459 έγραψε:Μένει λοιπόν να δούμε αν το dkms θα χτίσει σωστά το module όταν αναβαθμιστεί ο πυρήνας ή θα πρέπει να το κάνω και πάλι χειροκίνητα.

Προς ενημέρωση, πριν από λίγο αναβάθμισε από τον 4.15.0-32 στον 4.15.0-33 και η κάρτα λειτουργεί κανονικά.
Γνώσεις ⇛ Linux: Αν μου δώσεις οδηγίες σε τερματικό δεν τρομάζω ┃ Προγραμματισμός: Καθόλου┃ Αγγλικά: Εξαιρετικά
Λειτουργικό : Πάντα την τρέχουσα έκδοση ubuntu/kubuntu 64bit και σε κάποια pc 12.04 32bit
Συσκευές-> Πάρα πολλές, θα στο γράψω ανά περίπτωση.
Άβαταρ μέλους
dim459
superbTUX
superbTUX
 
Δημοσιεύσεις: 3668
Εγγραφή: 15 Φεβ 2009, 19:28
Τοποθεσία: Bόρεια Αττική
Εκτύπωση


  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Κάρτες Δικτύου (Ethernet, WiFi, Bluetooth) / Internet