drivers για crypto budget ii

[argi21]

καλησπερα παιδες εχω το ubuntu 8,10 εγκατεστημενα και σημερα προσπαθησα να συνδεσω μια web cam crypto budget ii παρατηρησα οτι δεν μοθ δουλευει στο skype την αναγνωριζει μεν αλλα δεν βγαζει video εχει κανεις ιδεα τι μπορω να κανω για να την αναστησω??

[logari81]

γεια σου, δοκιμασε την καταρχην με camorama, cheese και ekiga, αν δεν δουλευει ουτε εκει στειλε μας τα αποτελεσματα των εντολών

Κώδικας: Επιλογή όλων

lsusb
dmesg

[argi21]

Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 003: ID 046d:c50e Logitech, Inc. MX-1000 Cordless Mouse Receiver
Bus 007 Device 002: ID 0603:00f2 Novatek Microelectronics Corp.
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 093a:2468 Pixart Imaging, Inc. Cammaestro 2.5DU/X-EYE/Orite SC-120/ICGear TravelCam/Easy Snap Snake Eye WebCam
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0b05:1742 ASUSTek Computer, Inc. 802.11n Network Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 04a9:10b5 Canon, Inc.
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[linuxman]

Κώδικας: Επιλογή όλων

[77789.937783] #
[77790.996202] #
[77791.028567] #
[77791.060068] #
[77791.100271] #
[77792.132333] #
[77792.164576] #
[77792.224041] #
[77792.256076] #
[77793.288585] #
[77793.320580] #
[77793.356083] #
[77793.404083] #
[77793.456585] #
[77793.488211] #
[77793.520585] #
[77794.488093] #
[77794.520593] #
[77794.580594] #
[77794.612592] #
[77794.648095] #
[77794.680594] #
[77794.712593] #
[77794.744345] #
[77794.776093] #
[77794.808095] #
[77794.840094] #
[77795.012471] #
[77795.044321] #
[77795.076595] #
[77795.108596] #
[77795.140097] #
[77795.172101] #
[77795.204432] #
[77795.376099] #
[77795.408598] #
[77795.440100] #
[77795.472601] #
[77795.504847] #
[77795.612102] #
[77795.680724] #
[77795.712601] #
[77795.744103] #
[77795.776353] #
[77795.808103] #
[77795.840601] #
[77795.872854] #
[77795.904103] #
[77796.076587] #
[77796.112091] #
[77796.144606] #
[77796.176104] #
[77796.208106] #
[77796.241604] #
[77796.416107] #
[77796.448107] #
[77796.480107] #
[77796.514635] #
[77796.548614] #
[77796.580735] #
[77796.612109] #
[77796.644608] #
[77796.816037] #
[77796.848035] #
[77796.880111] #
[77796.912206] #
[77796.944107] #
[77796.976136] #
[77797.180112] #
[77797.212112] #
[77797.244113] #
[77797.276363] #
[77797.308365] #
[77797.480075] #
[77797.512114] #
[77797.544617] #
[77797.576614] #
[77797.608685] #
[77797.676746] #
[77797.708116] #
[77797.792618] #
[77797.824616] #
[77797.856244] #
[77797.889603] #
[77797.920869] #
[77797.952119] #
[77797.984220] #
[77798.016782] #
[77798.048110] #
[77798.080996] #
[77798.252619] #
[77798.284121] #
[77798.316124] #
[77798.348117] #
[77798.412368] #
[77798.592622] #
[77798.624048] #
[77798.656496] #
[77798.688640] #
[77798.720125] #
[77798.892127] #
[77798.924128] #
[77798.956127] #
[77798.988127] #
[77799.021474] #
[77799.080627] #
[77799.114125] #
[77799.144127] #
[77799.176044] #
[77799.349696] #
[77799.752896] #
[77799.804131] #
[77799.836383] #
[77799.868075] #
[77799.904259] #
[77799.936656] #
[77799.968556] #
[77800.010373] #
[77800.044635] #
[77800.077753] #
[77800.089894] DRS: unkown mode,default use 11N 1S AP
[77800.089900] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[77800.132883] #
[77800.165132] #
[77800.196388] #
[77800.228550] #
[77800.261010] #
[77800.317012] #
[77800.348134] #
[77800.380259] #
[77800.421013] #
[77800.452636] #
[77800.484139] #
[77800.520137] #
[77800.552137] #
[77800.584640] #
[77800.624640] #
[77800.656389] #
[77800.692016] #
[77800.729137] #
[77800.761141] #
[77800.792532] #
[77800.828390] #
[77801.100142] #
[77801.649148] #
[77801.680148] #
[77801.712146] #
[77802.768664] #
[77802.800656] #
[77802.832154] #
[77803.864582] #
[77803.900538] #
[77803.933290] #
[77803.964036] #
[77804.000295] #
[77804.032038] #
[77804.064077] #
[77804.264168] #
[77805.096055] #
[77805.128549] #
[77805.160047] #
[77805.192048] #
[77806.256556] #
[77806.288556] #
[77806.320538] #
[77806.356558] #
[77809.428581] #
[77809.476034] #
[77809.528828] #
[77809.560580] #
[77809.592257] #
[77809.632533] #
[77810.560090] #
[77810.592066] #
[77810.624962] #
[77810.656591] #
[77810.688087] #
[77810.720092] #
[77810.752090] #
[77810.784215] #
[77810.816592] #
[77810.848591] #
[77810.880092] #
[77810.912088] #
[77810.944064] #
[77811.120090] #
[77811.152089] #
[77811.184718] #
[77811.216096] #
[77811.248597] #
[77811.280094] #
[77811.312594] #
[77811.484594] #
[77811.516594] #
[77811.548595] #
[77811.581574] #
[77811.624103] #
[77811.656072] #
[77811.688098] #
[77811.860099] #
[77811.892394] #
[77811.928600] #
[77811.964962] #
[77812.000102] #
[77812.172602] #
[77812.204103] #
[77812.237102] #
[77812.268099] #
[77812.300631] #
[77812.332605] #
[77812.364102] #
[77812.396727] #
[77812.428728] #
[77812.460031] #
[77812.492980] #
[77812.524604] #
[77812.652606] #
[77812.684344] #
[77812.716341] #
[77812.749356] #
[77812.780613] #
[77812.812612] #
[77812.844107] #
[77812.876234] #
[77812.908855] #
[77812.940290] #
[77812.972606] #
[77813.152735] #
[77813.184683] #
[77813.216609] #
[77813.252110] #
[77813.284619] #
[77813.316109] #
[77813.488490] #
[77813.522484] #
[77813.556601] #
[77813.588114] #
[77813.621239] #
[77813.748611] #
[77813.792614] #
[77813.824621] #
[77813.857522] #
[77813.888115] #
[77813.929116] #
[77813.964240] #
[77813.996614] #
[77814.180618] #
[77814.212035] #
[77814.244246] #
[77814.276744] #
[77814.308119] #
[77814.340119] #
[77814.512745] #
[77814.544556] #
[77814.596267] #
[77814.628246] #
[77814.700072] #
[77814.732872] #
[77814.804724] #
[77814.905998] #
[77814.936345] #
[77814.968250] #
[77815.000122] #
[77815.036217] #
[77815.068746] #
[77815.100125] #
[77815.132625] #
[77815.164626] #
[77815.336129] #
[77815.368126] #
[77815.400717] #
[77815.432218] #
[77815.464625] #
[77815.496252] #
[77815.528506] #
[77815.560626] #
[77815.592628] #
[77815.626503] #
[77815.656625] #
[77815.836133] #
[77815.882880] #
[77815.916132] #
[77815.948131] #
[77816.868544] #
[77816.904763] #
[77816.936116] #
[77816.968138] #
[77817.004639] #
[77817.037015] #
[77817.068138] #
[77817.100187] #
[77817.140137] #
[77817.172136] #
[77817.204024] #
[77817.380644] #
[77817.416146] #
[77817.588270] #
[77817.620144] #
[77817.652642] #
[77817.684627] #
[77817.716142] #
[77817.748143] #
[77817.780270] #
[77817.812595] #
[77817.844630] #
[77818.016183] #
[77818.068652] #
[77818.100646] #
[77818.132091] #
[77818.165896] #
[77818.196617] #
[77818.228647] #
[77818.260525] #
[77818.293523] #
[77818.472150] #
[77818.504147] #
[77818.536401] #
[77818.568146] #
[77818.600149] #
[77818.632524] #
[77818.804153] #
[77818.836654] #
[77818.868654] #
[77818.900154] #
[77818.932654] #
[77818.964042] #
[77818.997654] #
[77819.028657] #
[77819.060150] #
[77819.100530] #
[77819.132155] #
[77819.232155] #
[77819.264155] #
[77819.296140] #
[77819.328282] #
[77819.360781] #
[77819.400532] #
[77819.576159] #
[77819.608158] #
[77819.641993] #
[77819.672534] #
[77819.706422] #
[77819.740594] #
[77819.772783] #
[77819.805659] #
[77819.837537] #
[77819.868034] #
[77820.048315] #
[77820.082016] #
[77820.112036] #
[77820.180704] #
[77820.213199] #
[77820.244537] #
[77820.420839] #
[77820.452539] #
[77820.484939] #
[77820.516162] #
[77820.548539] #
[77820.580293] #
[77820.757273] #
[77820.790043] #
[77820.849039] #
[77820.893290] #
[77821.072046] #
[77821.104547] #
[77821.136045] #
[77821.176546] #
[77821.208545] #
[77821.240670] #
[77821.272421] #
[77821.304092] #
[77821.336678] #
[77821.508923] #
[77821.540050] #
[77821.572048] #
[77821.604550] #
[77821.636050] #
[77821.668673] #
[77821.700673] #
[77821.732175] #
[77821.765426] #
[77821.796551] #
[77821.969138] #
[77822.024552] #
[77822.056802] #
[77822.088052] #
[77822.136012] #
[77822.168242] #
[77823.252062] #
[77823.284562] #
[77823.316561] #
[77823.356560] #
[77823.388061] #
[77823.430845] DRS: unkown mode,default use 11N 1S AP
[77823.430851] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[77823.472132] #
[77823.504814] #
[77823.536565] #
[77823.568237] #
[77823.604314] #
[77823.664565] #
[77823.696066] #
[77823.728690] #
[77823.790438] #
[77823.824941] #
[77823.868065] #
[77823.900814] #
[77823.934315] #
[77823.972191] #
[77824.004567] #
[77824.036562] #
[77824.892449] #
[77824.924075] #
[77824.956448] #
[77824.988573] #
[77826.020582] #
[77826.052583] #
[77826.084084] #
[77826.120584] #
[77826.152903] #
[77826.184568] #
[77827.248842] #
[77827.280375] #
[77827.312589] #
[77827.612666] #
[77828.376443] #
[77828.408603] #
[77830.444617] #
[77830.476117] #
[77830.524117] #
[77830.556043] #
[77830.856094] #
[77831.589126] #
[77831.644249] #
[77832.676135] #
[77832.708220] #
[77832.740136] #
[77832.792087] #
[77832.825508] #
[77832.880385] #
[77832.912133] #
[77832.944635] #
[77832.980581] #
[77833.012761] #
[77833.045135] #
[77833.904643] #
[77833.941091] #
[77833.972142] #
[77834.004145] #
[77834.036499] #
[77834.068644] #
[77834.100080] #
[77834.132050] #
[77834.305022] #
[77834.336395] #
[77834.368645] #
[77834.400521] #
[77834.436148] #
[77834.608146] #
[77834.641147] #
[77834.672649] #
[77834.704273] #
[77834.740271] #
[77834.776149] #
[77834.808146] #
[77834.884559] #
[77834.916650] #
[77834.986063] #
[77835.016652] #
[77835.048150] #
[77835.080104] #
[77835.112651] #
[77835.144150] #
[77835.176153] #
[77835.209402] #
[77835.240154] #
[77835.272152] #
[77835.444781] #
[77835.476153] #
[77835.652655] #
[77835.684156] #
[77835.732531] #
[77835.764657] #
[77835.796657] #
[77835.828657] #
[77835.865014] #
[77835.896658] #
[77835.948728] #
[77835.980660] #
[77836.152542] #
[77836.188034] #
[77836.220530] #
[77836.252660] #
[77836.296546] #
[77836.328037] #
[77836.360536] #
[77836.396612] #
[77836.428661] #
[77836.528039] #
[77836.572669] #
[77836.604662] #
[77836.637364] #
[77836.859045] Terminate the TimerQThr_pid=9715!
[77836.859614] Terminate the MLMEThr_pid=9713!
[77836.859974] Terminate the RTUSBCmdThr_pid=9714!
[77836.888287] #
[77836.920669] #
[77836.952666] #
[77836.962759] ---> RTMPFreeTxRxRingMemory
[77836.962848] <--- ReleaseAdapter
[77861.176513] device eth1 left promiscuous mode

[argi21]

ekiga δουλευει μα αθλια...cheece...δεν δουλευει...camorama...οπως και στο ekiga..

[linuxman]

ekiga δουλευει μα αθλια...cheece...δεν δουλευει...camorama...οπως και στο ekiga..

Το αποτέλεσμα ποιο πάνω δεν πρέπει να είναι από το dmesg , και δες πως το έκανα μέσα στα

Κώδικας: Επιλογή όλων

[code]εδώ[/code]

Πως έκανες την εγκατάσταση κανονική η μέσα από τα παράθυρα ?

[logari81]

απο synaptic εκανα ολα τα setup δινοντας αυτο το cmd dmesg στο terminal αυτο μου βγαζει...

Κώδικας: Επιλογή όλων

[77791.100271] #
[77792.132333] #
[77792.164576] #
[77792.224041] #
[77792.256076] #
[77793.288585] #
[77793.320580] #
[77793.356083] #
[77793.404083] #
[77793.456585] #
[77793.488211] #
[77793.520585] #
[77794.488093] #
[77794.520593] #
[77794.580594] #
[77794.612592] #
[77794.648095] #
[77794.680594] #
[77794.712593] #
[77794.744345] #
[77794.776093] #
[77794.808095] #
[77794.840094] #
[77795.012471] #
[77795.044321] #
[77795.076595] #
[77795.108596] #
[77795.140097] #
[77795.172101] #
[77795.204432] #
[77795.376099] #
[77795.408598] #
[77795.440100] #
[77795.472601] #
[77795.504847] #
[77795.612102] #
[77795.680724] #
[77795.712601] #
[77795.744103] #
[77795.776353] #
[77795.808103] #
[77795.840601] #
[77795.872854] #
[77795.904103] #
[77796.076587] #
[77796.112091] #
[77796.144606] #
[77796.176104] #
[77796.208106] #
[77796.241604] #
[77796.416107] #
[77796.448107] #
[77796.480107] #
[77796.514635] #
[77796.548614] #
[77796.580735] #
[77796.612109] #
[77796.644608] #
[77796.816037] #
[77796.848035] #
[77796.880111] #
[77796.912206] #
[77796.944107] #
[77796.976136] #
[77797.180112] #
[77797.212112] #
[77797.244113] #
[77797.276363] #
[77797.308365] #
[77797.480075] #
[77797.512114] #
[77797.544617] #
[77797.576614] #
[77797.608685] #
[77797.676746] #
[77797.708116] #
[77797.792618] #
[77797.824616] #
[77797.856244] #
[77797.889603] #
[77797.920869] #
[77797.952119] #
[77797.984220] #
[77798.016782] #
[77798.048110] #
[77798.080996] #
[77798.252619] #
[77798.284121] #
[77798.316124] #
[77798.348117] #
[77798.412368] #
[77798.592622] #
[77798.624048] #
[77798.656496] #
[77798.688640] #
[77798.720125] #
[77798.892127] #
[77798.924128] #
[77798.956127] #
[77798.988127] #
[77799.021474] #
[77799.080627] #
[77799.114125] #
[77799.144127] #
[77799.176044] #
[77799.349696] #
[77799.752896] #
[77799.804131] #
[77799.836383] #
[77799.868075] #
[77799.904259] #
[77799.936656] #
[77799.968556] #
[77800.010373] #
[77800.044635] #
[77800.077753] #
[77800.089894] DRS: unkown mode,default use 11N 1S AP
[77800.089900] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[77800.132883] #
[77800.165132] #
[77800.196388] #
[77800.228550] #
[77800.261010] #
[77800.317012] #
[77800.348134] #
[77800.380259] #
[77800.421013] #
[77800.452636] #
[77800.484139] #
[77800.520137] #
[77800.552137] #
[77800.584640] #
[77800.624640] #
[77800.656389] #
[77800.692016] #
[77800.729137] #
[77800.761141] #
[77800.792532] #
[77800.828390] #
[77801.100142] #
[77801.649148] #
[77801.680148] #
[77801.712146] #
[77802.768664] #
[77802.800656] #
[77802.832154] #
[77803.864582] #
[77803.900538] #
[77803.933290] #
[77803.964036] #
[77804.000295] #
[77804.032038] #
[77804.064077] #
[77804.264168] #
[77805.096055] #
[77805.128549] #
[77805.160047] #
[77805.192048] #
[77806.256556] #
[77806.288556] #
[77806.320538] #
[77806.356558] #
[77809.428581] #
[77809.476034] #
[77809.528828] #
[77809.560580] #
[77809.592257] #
[77809.632533] #
[77810.560090] #
[77810.592066] #
[77810.624962] #
[77810.656591] #
[77810.688087] #
[77810.720092] #
[77810.752090] #
[77810.784215] #
[77810.816592] #
[77810.848591] #
[77810.880092] #
[77810.912088] #
[77810.944064] #
[77811.120090] #
[77811.152089] #
[77811.184718] #
[77811.216096] #
[77811.248597] #
[77811.280094] #
[77811.312594] #
[77811.484594] #
[77811.516594] #
[77811.548595] #
[77811.581574] #
[77811.624103] #
[77811.656072] #
[77811.688098] #
[77811.860099] #
[77811.892394] #
[77811.928600] #
[77811.964962] #
[77812.000102] #
[77812.172602] #
[77812.204103] #
[77812.237102] #
[77812.268099] #
[77812.300631] #
[77812.332605] #
[77812.364102] #
[77812.396727] #
[77812.428728] #
[77812.460031] #
[77812.492980] #
[77812.524604] #
[77812.652606] #
[77812.684344] #
[77812.716341] #
[77812.749356] #
[77812.780613] #
[77812.812612] #
[77812.844107] #
[77812.876234] #
[77812.908855] #
[77812.940290] #
[77812.972606] #
[77813.152735] #
[77813.184683] #
[77813.216609] #
[77813.252110] #
[77813.284619] #
[77813.316109] #
[77813.488490] #
[77813.522484] #
[77813.556601] #
[77813.588114] #
[77813.621239] #
[77813.748611] #
[77813.792614] #
[77813.824621] #
[77813.857522] #
[77813.888115] #
[77813.929116] #
[77813.964240] #
[77813.996614] #
[77814.180618] #
[77814.212035] #
[77814.244246] #
[77814.276744] #
[77814.308119] #
[77814.340119] #
[77814.512745] #
[77814.544556] #
[77814.596267] #
[77814.628246] #
[77814.700072] #
[77814.732872] #
[77814.804724] #
[77814.905998] #
[77814.936345] #
[77814.968250] #
[77815.000122] #
[77815.036217] #
[77815.068746] #
[77815.100125] #
[77815.132625] #
[77815.164626] #
[77815.336129] #
[77815.368126] #
[77815.400717] #
[77815.432218] #
[77815.464625] #
[77815.496252] #
[77815.528506] #
[77815.560626] #
[77815.592628] #
[77815.626503] #
[77815.656625] #
[77815.836133] #
[77815.882880] #
[77815.916132] #
[77815.948131] #
[77816.868544] #
[77816.904763] #
[77816.936116] #
[77816.968138] #
[77817.004639] #
[77817.037015] #
[77817.068138] #
[77817.100187] #
[77817.140137] #
[77817.172136] #
[77817.204024] #
[77817.380644] #
[77817.416146] #
[77817.588270] #
[77817.620144] #
[77817.652642] #
[77817.684627] #
[77817.716142] #
[77817.748143] #
[77817.780270] #
[77817.812595] #
[77817.844630] #
[77818.016183] #
[77818.068652] #
[77818.100646] #
[77818.132091] #
[77818.165896] #
[77818.196617] #
[77818.228647] #
[77818.260525] #
[77818.293523] #
[77818.472150] #
[77818.504147] #
[77818.536401] #
[77818.568146] #
[77818.600149] #
[77818.632524] #
[77818.804153] #
[77818.836654] #
[77818.868654] #
[77818.900154] #
[77818.932654] #
[77818.964042] #
[77818.997654] #
[77819.028657] #
[77819.060150] #
[77819.100530] #
[77819.132155] #
[77819.232155] #
[77819.264155] #
[77819.296140] #
[77819.328282] #
[77819.360781] #
[77819.400532] #
[77819.576159] #
[77819.608158] #
[77819.641993] #
[77819.672534] #
[77819.706422] #
[77819.740594] #
[77819.772783] #
[77819.805659] #
[77819.837537] #
[77819.868034] #
[77820.048315] #
[77820.082016] #
[77820.112036] #
[77820.180704] #
[77820.213199] #
[77820.244537] #
[77820.420839] #
[77820.452539] #
[77820.484939] #
[77820.516162] #
[77820.548539] #
[77820.580293] #
[77820.757273] #
[77820.790043] #
[77820.849039] #
[77820.893290] #
[77821.072046] #
[77821.104547] #
[77821.136045] #
[77821.176546] #
[77821.208545] #
[77821.240670] #
[77821.272421] #
[77821.304092] #
[77821.336678] #
[77821.508923] #
[77821.540050] #
[77821.572048] #
[77821.604550] #
[77821.636050] #
[77821.668673] #
[77821.700673] #
[77821.732175] #
[77821.765426] #
[77821.796551] #
[77821.969138] #
[77822.024552] #
[77822.056802] #
[77822.088052] #
[77822.136012] #
[77822.168242] #
[77823.252062] #
[77823.284562] #
[77823.316561] #
[77823.356560] #
[77823.388061] #
[77823.430845] DRS: unkown mode,default use 11N 1S AP
[77823.430851] DRS: unkown mode (SupRateLen=4, ExtRateLen=8, MCSSet[0]=0x0, MCSSet[1]=0x0)
[77823.472132] #
[77823.504814] #
[77823.536565] #
[77823.568237] #
[77823.604314] #
[77823.664565] #
[77823.696066] #
[77823.728690] #
[77823.790438] #
[77823.824941] #
[77823.868065] #
[77823.900814] #
[77823.934315] #
[77823.972191] #
[77824.004567] #
[77824.036562] #
[77824.892449] #
[77824.924075] #
[77824.956448] #
[77824.988573] #
[77826.020582] #
[77826.052583] #
[77826.084084] #
[77826.120584] #
[77826.152903] #
[77826.184568] #
[77827.248842] #
[77827.280375] #
[77827.312589] #
[77827.612666] #
[77828.376443] #
[77828.408603] #
[77830.444617] #
[77830.476117] #
[77830.524117] #
[77830.556043] #
[77830.856094] #
[77831.589126] #
[77831.644249] #
[77832.676135] #
[77832.708220] #
[77832.740136] #
[77832.792087] #
[77832.825508] #
[77832.880385] #
[77832.912133] #
[77832.944635] #
[77832.980581] #
[77833.012761] #
[77833.045135] #
[77833.904643] #
[77833.941091] #
[77833.972142] #
[77834.004145] #
[77834.036499] #
[77834.068644] #
[77834.100080] #
[77834.132050] #
[77834.305022] #
[77834.336395] #
[77834.368645] #
[77834.400521] #
[77834.436148] #
[77834.608146] #
[77834.641147] #
[77834.672649] #
[77834.704273] #
[77834.740271] #
[77834.776149] #
[77834.808146] #
[77834.884559] #
[77834.916650] #
[77834.986063] #
[77835.016652] #
[77835.048150] #
[77835.080104] #
[77835.112651] #
[77835.144150] #
[77835.176153] #
[77835.209402] #
[77835.240154] #
[77835.272152] #
[77835.444781] #
[77835.476153] #
[77835.652655] #
[77835.684156] #
[77835.732531] #
[77835.764657] #
[77835.796657] #
[77835.828657] #
[77835.865014] #
[77835.896658] #
[77835.948728] #
[77835.980660] #
[77836.152542] #
[77836.188034] #
[77836.220530] #
[77836.252660] #
[77836.296546] #
[77836.328037] #
[77836.360536] #
[77836.396612] #
[77836.428661] #
[77836.528039] #
[77836.572669] #
[77836.604662] #
[77836.637364] #
[77836.859045] Terminate the TimerQThr_pid=9715!
[77836.859614] Terminate the MLMEThr_pid=9713!
[77836.859974] Terminate the RTUSBCmdThr_pid=9714!
[77836.888287] #
[77836.920669] #
[77836.952666] #
[77836.962759] ---> RTMPFreeTxRxRingMemory
[77836.962848] <--- ReleaseAdapter
[77861.176513] device eth1 left promiscuous mode
[79674.027401] UDP: short packet: From 64.30.2.130:32602 25649/73 to 192.168.0.2:62558
argi21@argi21-desktop:~$

[logari81]

επειδή κατι γινεται με το dmesg και δεν σου βγαζει τις πληροφοριες που θελουμε, τρεξε

Κώδικας: Επιλογή όλων

gedit /var/log/dmesg

και κανε copy paste το περιεχομενο του αρχειου εδω μεσα σε

Κώδικας: Επιλογή όλων

[code][/code]

[logari81]

Κώδικας: Επιλογή όλων

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-11-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC 2009 (Ubuntu 2.6.27-11.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff70000 (usable)
[ 0.000000] BIOS-e820: 000000007ff70000 - 000000007ff7e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff7e000 - 000000007ffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffd0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x7ff70 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 10000-15000
[ 0.000000] RAMDISK: 3781c000 - 37fefdcf
[ 0.000000] ACPI: RSDP 000FB410, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FF70000, 0040 (r1 A_M_I_ OEMRSDT 12000811 MSFT 97)
[ 0.000000] ACPI: FACP 7FF70200, 0084 (r2 A_M_I_ OEMFACP 12000811 MSFT 97)
[ 0.000000] ACPI: DSDT 7FF70440, 96F7 (r1 A0991 A0991001 1 INTL 20060113)
[ 0.000000] ACPI: FACS 7FF7E000, 0040
[ 0.000000] ACPI: APIC 7FF70390, 006C (r1 A_M_I_ OEMAPIC 12000811 MSFT 97)
[ 0.000000] ACPI: MCFG 7FF70400, 003C (r1 A_M_I_ OEMMCFG 12000811 MSFT 97)
[ 0.000000] ACPI: OEMB 7FF7E040, 0089 (r1 A_M_I_ AMI_OEM 12000811 MSFT 97)
[ 0.000000] ACPI: HPET 7FF79B40, 0038 (r1 A_M_I_ OEMHPET 12000811 MSFT 97)
[ 0.000000] ACPI: OSFR 7FF79B80, 00B0 (r1 A_M_I_ OEMOSFR 12000811 MSFT 97)
[ 0.000000] ACPI: SSDT 7FF7E5D0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00011000 - 00018000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c29e0] TEXT DATA BSS ==> [0000100000 - 00005c29e0]
[ 0.000000] #4 [003781c000 - 0037fefdcf] RAMDISK ==> [003781c000 - 0037fefdcf]
[ 0.000000] #5 [00005c3000 - 00005c6000] INIT_PG_TABLE ==> [00005c3000 - 00005c6000]
[ 0.000000] #6 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0007ff70
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0007ff70
[ 0.000000] On node 0 totalpages: 524029
[ 0.000000] free_area_init_node: node 0, pgdat c048c680, node_mem_map c1000240
[ 0.000000] DMA zone: 3945 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 292177 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519422
[ 0.000000] Kernel command line: root=UUID=5f8975f4-246c-40c5-9406-3942e8897af1 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 3005.533 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2062856k/2096576k available (2576k kernel code, 32364k reserved, 1165k data, 424k init, 1179072k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ad000 - 0xc0517000 ( 424 kB)
[ 0.004000] .data : 0xc03840da - 0xc04a7680 (1165 kB)
[ 0.004000] .text : 0xc0100000 - 0xc03840da (2576 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6011.06 BogoMIPS (lpj=12022132)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017334] ACPI: Core revision 20080609
[ 0.019678] ACPI: Checking initramfs for custom DSDT
[ 0.248179] ENABLING IO-APIC IRQs
[ 0.248342] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.288354] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.292018] APIC calibration not consistent with PM Timer: 139ms instead of 100ms
[ 0.292018] APIC delta adjusted to PM-Timer: 2087186 (2922023)
[ 0.292018] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 6011.10 BogoMIPS (lpj=12022215)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.376714] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.376724] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.380035] Brought up 2 CPUs
[ 0.380037] Total of 2 processors activated (12022.17 BogoMIPS).
[ 0.380054] CPU0 attaching sched-domain:
[ 0.380056] domain 0: span 0-1 level MC
[ 0.380057] groups: 0 1
[ 0.380061] CPU1 attaching sched-domain:
[ 0.380062] domain 0: span 0-1 level MC
[ 0.380064] groups: 1 0
[ 0.380112] net_namespace: 840 bytes
[ 0.380112] Booting paravirtualized kernel on bare hardware
[ 0.380192] Time: 1:36:06 Date: 03/07/09
[ 0.380208] NET: Registered protocol family 16
[ 0.380220] EISA bus registered
[ 0.380220] ACPI: bus type pci registered
[ 0.380220] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.380220] PCI: Not using MMCONFIG.
[ 0.380220] PCI: BIOS BUG #0[00000031] found
[ 0.380220] PCI: Using configuration type 1 for base access
[ 0.380728] ACPI: EC: Look up EC in DSDT
[ 0.393767] ACPI: Interpreter enabled
[ 0.393771] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.393782] ACPI: Using IOAPIC for interrupt routing
[ 0.393825] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.396197] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.396199] PCI: Using MMCONFIG for extended config space
[ 0.402684] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.402684] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.402684] pci 0000:00:01.0: PME# disabled
[ 0.402684] PCI: 0000:00:1a.0 reg 20 io port: [a800, a81f]
[ 0.402684] PCI: 0000:00:1a.1 reg 20 io port: [a880, a89f]
[ 0.402684] PCI: 0000:00:1a.2 reg 20 io port: [ac00, ac1f]
[ 0.404048] PCI: 0000:00:1a.7 reg 10 32bit mmio: [f9fffc00, f9ffffff]
[ 0.404086] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.404090] pci 0000:00:1a.7: PME# disabled
[ 0.404114] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f9ff8000, f9ffbfff]
[ 0.404142] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.404145] pci 0000:00:1b.0: PME# disabled
[ 0.404181] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.404184] pci 0000:00:1c.0: PME# disabled
[ 0.404222] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.404225] pci 0000:00:1c.4: PME# disabled
[ 0.404261] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.404263] pci 0000:00:1c.5: PME# disabled
[ 0.404298] PCI: 0000:00:1d.0 reg 20 io port: [a080, a09f]
[ 0.404347] PCI: 0000:00:1d.1 reg 20 io port: [a400, a41f]
[ 0.404395] PCI: 0000:00:1d.2 reg 20 io port: [a480, a49f]
[ 0.404447] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f9fff800, f9fffbff]
[ 0.404485] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.404488] pci 0000:00:1d.7: PME# disabled
[ 0.404599] PCI: 0000:00:1f.2 reg 10 io port: [9000, 9007]
[ 0.404604] PCI: 0000:00:1f.2 reg 14 io port: [8c00, 8c03]
[ 0.404608] PCI: 0000:00:1f.2 reg 18 io port: [8880, 8887]
[ 0.404612] PCI: 0000:00:1f.2 reg 1c io port: [8800, 8803]
[ 0.404616] PCI: 0000:00:1f.2 reg 20 io port: [8480, 848f]
[ 0.404620] PCI: 0000:00:1f.2 reg 24 io port: [8400, 840f]
[ 0.404647] PCI: 0000:00:1f.3 reg 10 64bit mmio: [f9fff400, f9fff4ff]
[ 0.404658] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
[ 0.404689] PCI: 0000:00:1f.5 reg 10 io port: [a000, a007]
[ 0.404693] PCI: 0000:00:1f.5 reg 14 io port: [9c00, 9c03]
[ 0.404698] PCI: 0000:00:1f.5 reg 18 io port: [9880, 9887]
[ 0.404702] PCI: 0000:00:1f.5 reg 1c io port: [9800, 9803]
[ 0.404706] PCI: 0000:00:1f.5 reg 20 io port: [9480, 948f]
[ 0.404710] PCI: 0000:00:1f.5 reg 24 io port: [9400, 940f]
[ 0.404745] PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
[ 0.404752] PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
[ 0.404758] PCI: 0000:01:00.0 reg 1c 64bit mmio: [fa000000, fbffffff]
[ 0.404762] PCI: 0000:01:00.0 reg 24 io port: [bc00, bc7f]
[ 0.404766] PCI: 0000:01:00.0 reg 30 32bit mmio: [fe880000, fe8fffff]
[ 0.404800] PCI: bridge 0000:00:01.0 io port: [b000, bfff]
[ 0.404802] PCI: bridge 0000:00:01.0 32bit mmio: [fa000000, fe8fffff]
[ 0.404805] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
[ 0.404839] PCI: bridge 0000:00:1c.0 64bit mmio pref: [f8f00000, f8ffffff]
[ 0.404878] PCI: 0000:03:00.0 reg 10 io port: [dc00, dc07]
[ 0.404884] PCI: 0000:03:00.0 reg 14 io port: [d880, d883]
[ 0.404891] PCI: 0000:03:00.0 reg 18 io port: [d800, d807]
[ 0.404897] PCI: 0000:03:00.0 reg 1c io port: [d480, d483]
[ 0.404904] PCI: 0000:03:00.0 reg 20 io port: [d400, d40f]
[ 0.404910] PCI: 0000:03:00.0 reg 24 32bit mmio: [feaffc00, feafffff]
[ 0.404936] pci 0000:03:00.0: supports D1
[ 0.404938] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.404941] pci 0000:03:00.0: PME# disabled
[ 0.404967] PCI: bridge 0000:00:1c.4 io port: [d000, dfff]
[ 0.404969] PCI: bridge 0000:00:1c.4 32bit mmio: [fea00000, feafffff]
[ 0.405022] PCI: 0000:02:00.0 reg 10 64bit mmio: [fe9fc000, fe9fffff]
[ 0.405029] PCI: 0000:02:00.0 reg 18 io port: [c800, c8ff]
[ 0.405052] PCI: 0000:02:00.0 reg 30 32bit mmio: [fe9c0000, fe9dffff]
[ 0.405068] pci 0000:02:00.0: supports D1
[ 0.405069] pci 0000:02:00.0: supports D2
[ 0.405070] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.405074] pci 0000:02:00.0: PME# disabled
[ 0.405099] PCI: bridge 0000:00:1c.5 io port: [c000, cfff]
[ 0.405102] PCI: bridge 0000:00:1c.5 32bit mmio: [fe900000, fe9fffff]
[ 0.405140] PCI: 0000:05:02.0 reg 10 32bit mmio: [febfc000, febfffff]
[ 0.405145] PCI: 0000:05:02.0 reg 14 io port: [e800, e8ff]
[ 0.405167] PCI: 0000:05:02.0 reg 30 32bit mmio: [febc0000, febdffff]
[ 0.405179] pci 0000:05:02.0: supports D1
[ 0.405180] pci 0000:05:02.0: supports D2
[ 0.405182] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.405185] pci 0000:05:02.0: PME# disabled
[ 0.405207] PCI: 0000:05:03.0 reg 10 32bit mmio: [febfb000, febfbfff]
[ 0.405242] pci 0000:05:03.0: supports D1
[ 0.405243] pci 0000:05:03.0: supports D2
[ 0.405244] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.405247] pci 0000:05:03.0: PME# disabled
[ 0.405277] pci 0000:00:1e.0: transparent bridge
[ 0.405280] PCI: bridge 0000:00:1e.0 io port: [e000, efff]
[ 0.405283] PCI: bridge 0000:00:1e.0 32bit mmio: [feb00000, febfffff]
[ 0.405302] bus 00 -> node 0
[ 0.405306] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.405516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.405607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.405737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.405825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.405924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.420798] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.420798] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.420798] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.420798] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.420798] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.420798] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.420798] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.420871] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.420919] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 2F, should be 2E [20080609]
[ 0.420919] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.420919] pnp: PnP ACPI init
[ 0.420919] ACPI: bus type pnp registered
[ 0.424305] pnp: PnP ACPI: found 15 devices
[ 0.424307] ACPI: ACPI bus type pnp unregistered
[ 0.424309] PnPBIOS: Disabled by ACPI PNP
[ 0.424318] PCI: Using ACPI for IRQ routing
[ 0.432034] NET: Registered protocol family 8
[ 0.432037] NET: Registered protocol family 20
[ 0.432051] NetLabel: Initializing
[ 0.432051] NetLabel: domain hash size = 128
[ 0.432051] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.432058] NetLabel: unlabeled traffic allowed by default
[ 0.432064] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.432069] hpet0: 4 64-bit timers, 14318180 Hz
[ 0.433658] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.433660] actual entries 65620
[ 0.433704] AppArmor: AppArmor Filesystem Enabled
[ 0.433719] ACPI: RTC can wake from S4
[ 0.440046] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.440054] system 00:06: ioport range 0x290-0x29f has been reserved
[ 0.440060] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.440063] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.440066] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.440069] system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved
[ 0.440072] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.440075] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.440078] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.440085] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.440091] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.440094] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.440099] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.440105] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.440108] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 0.440111] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.440114] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.440117] system 00:0e: iomem range 0xe0000000-0xffffffff could not be reserved
[ 0.474961] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.474963] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.474965] pci 0000:00:01.0: MEM window: 0xfa000000-0xfe8fffff
[ 0.474968] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.474971] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.474972] pci 0000:00:1c.0: IO window: disabled
[ 0.474975] pci 0000:00:1c.0: MEM window: disabled
[ 0.474978] pci 0000:00:1c.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
[ 0.474983] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.474985] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.474989] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
[ 0.474991] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.474996] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 0.474998] pci 0000:00:1c.5: IO window: 0xc000-0xcfff
[ 0.475001] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
[ 0.475004] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.475009] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.475011] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.475015] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.475017] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x000000880fffff
[ 0.475026] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.475028] pci 0000:00:01.0: setting latency timer to 64
[ 0.475034] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.475037] pci 0000:00:1c.0: setting latency timer to 64
[ 0.475042] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.475045] pci 0000:00:1c.4: setting latency timer to 64
[ 0.475049] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.475052] pci 0000:00:1c.5: setting latency timer to 64
[ 0.475057] pci 0000:00:1e.0: setting latency timer to 64
[ 0.475059] bus: 00 index 0 io port: [0, ffff]
[ 0.475061] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.475062] bus: 01 index 0 io port: [b000, bfff]
[ 0.475064] bus: 01 index 1 mmio: [fa000000, fe8fffff]
[ 0.475065] bus: 01 index 2 mmio: [d0000000, dfffffff]
[ 0.475066] bus: 01 index 3 mmio: [0, 0]
[ 0.475067] bus: 04 index 0 mmio: [0, 0]
[ 0.475069] bus: 04 index 1 mmio: [0, 0]
[ 0.475070] bus: 04 index 2 mmio: [f8f00000, f8ffffff]
[ 0.475071] bus: 04 index 3 mmio: [0, 0]
[ 0.475072] bus: 03 index 0 io port: [d000, dfff]
[ 0.475074] bus: 03 index 1 mmio: [fea00000, feafffff]
[ 0.475075] bus: 03 index 2 mmio: [0, 0]
[ 0.475076] bus: 03 index 3 mmio: [0, 0]
[ 0.475077] bus: 02 index 0 io port: [c000, cfff]
[ 0.475079] bus: 02 index 1 mmio: [fe900000, fe9fffff]
[ 0.475080] bus: 02 index 2 mmio: [0, 0]
[ 0.475081] bus: 02 index 3 mmio: [0, 0]
[ 0.475082] bus: 05 index 0 io port: [e000, efff]
[ 0.475084] bus: 05 index 1 mmio: [feb00000, febfffff]
[ 0.475085] bus: 05 index 2 mmio: [88000000, 880fffff]
[ 0.475086] bus: 05 index 3 io port: [0, ffff]
[ 0.475088] bus: 05 index 4 mmio: [0, ffffffff]
[ 0.475092] NET: Registered protocol family 2
[ 0.488073] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.488238] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.488405] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.488493] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.488495] TCP reno registered
[ 0.492086] NET: Registered protocol family 1
[ 0.492174] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.504031] Switched to high resolution mode on CPU 0
[ 0.711876] it is
[ 0.947739] Freeing initrd memory: 8015k freed
[ 0.948426] audit: initializing netlink socket (disabled)
[ 0.948440] type=2000 audit(1236389765.944:1): initialized
[ 0.952438] highmem bounce pool size: 64 pages
[ 0.952441] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.953822] VFS: Disk quotas dquot_6.5.1
[ 0.953873] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.953939] msgmni has been set to 1743
[ 0.954015] io scheduler noop registered
[ 0.954017] io scheduler anticipatory registered
[ 0.954019] io scheduler deadline registered
[ 0.954026] io scheduler cfq registered (default)
[ 0.954140] pci 0000:01:00.0: Boot video device
[ 0.954211] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.954233] pcieport-driver 0000:00:01.0: found MSI capability
[ 0.954251] pci_express 0000:00:01.0:pcie00: allocate port service
[ 0.954276] pci_express 0000:00:01.0:pcie03: allocate port service
[ 0.954327] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.954352] pcieport-driver 0000:00:1c.0: found MSI capability
[ 0.954376] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 0.954404] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 0.954427] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 0.954486] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.954510] pcieport-driver 0000:00:1c.4: found MSI capability
[ 0.954535] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 0.954559] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 0.954582] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 0.954641] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.954666] pcieport-driver 0000:00:1c.5: found MSI capability
[ 0.954690] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 0.954713] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 0.954736] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 0.954929] isapnp: Scanning for PnP cards...
[ 1.307660] isapnp: No Plug & Play device found
[ 1.327901] hpet_resources: 0xfed00000 is busy
[ 1.327951] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.328043] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.328487] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.329485] brd: module loaded
[ 1.329527] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.329633] PNP: No PS/2 controller found. Probing ports directly.
[ 1.332313] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.332317] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.336100] mice: PS/2 mouse device common for all mice
[ 1.336189] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.336207] rtc0: alarms up to one month, y3k, hpet irqs
[ 1.336283] EISA: Probing bus 0 at eisa.0
[ 1.336302] Cannot allocate resource for EISA slot 8
[ 1.336303] EISA: Detected 0 cards.
[ 1.336305] cpuidle: using governor ladder
[ 1.336307] cpuidle: using governor menu
[ 1.336620] TCP cubic registered
[ 1.336637] Using IPI No-Shortcut mode
[ 1.336740] registered taskstats version 1
[ 1.336824] Magic number: 1:190:609
[ 1.336837] pci_express 0000:00:01.0:pcie00: hash matches
[ 1.336862] rtc_cmos 00:03: setting system clock to 2009-03-07 01:36:07 UTC (1236389767)
[ 1.336864] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.336866] EDD information not available.
[ 1.336994] Freeing unused kernel memory: 424k freed
[ 1.337018] Write protecting the kernel text: 2580k
[ 1.337035] Write protecting the kernel read-only data: 940k
[ 1.472535] fuse init (API version 7.9)
[ 1.605222] ACPI: SSDT 7FF7E0D0, 0277 (r1 DpgPmm P001Ist 11 INTL 20060113)
[ 1.605506] processor ACPI0007:00: registered as cooling_device0
[ 1.605743] ACPI: SSDT 7FF7E350, 0277 (r1 DpgPmm P002Ist 12 INTL 20060113)
[ 1.606016] processor ACPI0007:01: registered as cooling_device1
[ 1.831422] usbcore: registered new interface driver usbfs
[ 1.831435] usbcore: registered new interface driver hub
[ 1.918075] usbcore: registered new device driver usb
[ 1.918191] No dock devices found.
[ 1.996708] SCSI subsystem initialized
[ 2.030326] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.030336] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.030338] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.030371] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.034262] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.034267] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.034276] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 2.052006] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.052095] usb usb1: configuration #1 chosen from 1 choice
[ 2.052111] hub 1-0:1.0: USB hub found
[ 2.052115] hub 1-0:1.0: 6 ports detected
[ 2.070676] USB Universal Host Controller Interface driver v3.0
[ 2.083278] libata version 3.00 loaded.
[ 2.256434] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.256441] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.256443] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.256462] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 2.256485] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 2.256550] usb usb2: configuration #1 chosen from 1 choice
[ 2.256567] hub 2-0:1.0: USB hub found
[ 2.256571] hub 2-0:1.0: 2 ports detected
[ 2.360596] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.360600] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.360603] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.360617] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 2.360638] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 2.360689] usb usb3: configuration #1 chosen from 1 choice
[ 2.360705] hub 3-0:1.0: USB hub found
[ 2.360709] hub 3-0:1.0: 2 ports detected
[ 2.368508] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 2.464791] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.464795] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 2.464798] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.464814] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
[ 2.464832] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[ 2.464885] usb usb4: configuration #1 chosen from 1 choice
[ 2.464901] hub 4-0:1.0: USB hub found
[ 2.464905] hub 4-0:1.0: 2 ports detected
[ 2.517368] usb 1-5: configuration #1 chosen from 1 choice
[ 2.672354] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.672363] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.672366] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.672384] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.676267] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.676272] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.676279] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 2.692008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.692195] usb usb5: configuration #1 chosen from 1 choice
[ 2.692312] hub 5-0:1.0: USB hub found
[ 2.692317] hub 5-0:1.0: 6 ports detected
[ 2.900362] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.900367] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.900369] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.900386] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.900404] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 2.900461] usb usb6: configuration #1 chosen from 1 choice
[ 2.900478] hub 6-0:1.0: USB hub found
[ 2.900481] hub 6-0:1.0: 2 ports detected
[ 3.012010] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 3.108376] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.108380] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.108382] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.108400] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 3.108421] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 3.108474] usb usb7: configuration #1 chosen from 1 choice
[ 3.108490] hub 7-0:1.0: USB hub found
[ 3.108494] hub 7-0:1.0: 2 ports detected
[ 3.146181] usb 5-1: configuration #1 chosen from 1 choice
[ 3.316947] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.316951] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.316953] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.316972] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.316990] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 3.317043] usb usb8: configuration #1 chosen from 1 choice
[ 3.317059] hub 8-0:1.0: USB hub found
[ 3.317063] hub 8-0:1.0: 2 ports detected
[ 3.421187] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.421203] pata_acpi 0000:00:1f.2: setting latency timer to 64
[ 3.421211] pata_acpi 0000:00:1f.2: PCI INT B disabled
[ 3.421243] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.421249] sky2 0000:02:00.0: setting latency timer to 64
[ 3.421260] sky2 0000:02:00.0: v1.22 addr 0xfe9fc000 irq 17 Yukon-2 EC Ultra rev 3
[ 3.421543] sky2 eth0: addr 00:22:15:6b:06:d4
[ 3.421568] skge 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.421594] skge 1.13 addr 0xfebfc000 irq 18 chip Yukon-Lite rev 9
[ 3.421706] pata_acpi 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.421719] pata_acpi 0000:00:1f.5: setting latency timer to 64
[ 3.421725] pata_acpi 0000:00:1f.5: PCI INT B disabled
[ 3.421738] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.421752] pata_acpi 0000:03:00.0: setting latency timer to 64
[ 3.421759] pata_acpi 0000:03:00.0: PCI INT A disabled
[ 3.421801] skge eth1: addr 00:22:15:6b:15:a0
[ 3.421876] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.422030] ahci 0000:03:00.0: version 3.0
[ 3.473547] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febfb000-febfb7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 3.520488] ata_piix 0000:00:1f.2: version 2.12
[ 3.520494] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.520497] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.520526] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.521453] scsi0 : ata_piix
[ 3.521512] scsi1 : ata_piix
[ 3.522686] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
[ 3.522690] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
[ 3.608009] usb 7-1: new low speed USB device using uhci_hcd and address 2
[ 3.785525] usb 7-1: configuration #1 chosen from 1 choice
[ 3.996061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.012874] ata1.00: ATA-7: WDC WD360ADFD-00NLR1, 20.07P20, max UDMA/133
[ 4.012878] ata1.00: 72303840 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.013023] ata1.01: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
[ 4.013026] ata1.01: 488397168 sectors, multi 16: LBA48
[ 4.028724] usb 7-2: new low speed USB device using uhci_hcd and address 3
[ 4.029378] ata1.00: configured for UDMA/133
[ 4.036280] ata1.01: configured for UDMA/133
[ 4.202887] usb 7-2: configuration #1 chosen from 1 choice
[ 4.205586] usbcore: registered new interface driver hiddev
[ 4.444010] usb 6-2: new full speed USB device using uhci_hcd and address 2
[ 4.512061] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.532289] ata2.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
[ 4.532293] ata2.00: 488397168 sectors, multi 16: LBA48
[ 4.532442] ata2.01: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
[ 4.532445] ata2.01: 488397168 sectors, multi 16: LBA48
[ 4.540302] ata2.00: configured for UDMA/133
[ 4.548796] ata2.01: configured for UDMA/133
[ 4.548881] scsi 0:0:0:0: Direct-Access ATA WDC WD360ADFD-00 20.0 PQ: 0 ANSI: 5
[ 4.548999] scsi 0:0:1:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
[ 4.549072] scsi 1:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
[ 4.549146] scsi 1:0:1:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
[ 4.549196] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.549199] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.549226] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.549248] scsi2 : ata_piix
[ 4.549282] scsi3 : ata_piix
[ 4.550283] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 4.550286] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 4.673894] usb 6-2: configuration #1 chosen from 1 choice
[ 4.691664] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input1
[ 4.691789] input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.1-1
[ 4.725508] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input2
[ 4.725684] input,hiddev96,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.1-1
[ 4.742668] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input3
[ 4.742815] input,hidraw2: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.1-2
[ 4.742826] usbcore: registered new interface driver usbhid
[ 4.742830] usbhid: v2.6:USB HID core driver
[ 4.754379] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000167a04b]
[ 5.024044] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.032181] ata3.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
[ 5.032183] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.048187] ata3.00: configured for UDMA/133
[ 5.524039] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.532179] ata4.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
[ 5.532181] ata4.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.548188] ata4.00: configured for UDMA/133
[ 5.548241] scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
[ 5.548318] scsi 3:0:0:0: Direct-Access ATA WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
[ 5.548370] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.548390] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 5.548653] scsi4 : pata_marvell
[ 5.548690] scsi5 : pata_marvell
[ 5.548713] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[ 5.548715] ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[ 5.553961] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.553985] scsi 0:0:1:0: Attached scsi generic sg1 type 0
[ 5.554008] scsi 1:0:0:0: Attached scsi generic sg2 type 0
[ 5.554031] scsi 1:0:1:0: Attached scsi generic sg3 type 0
[ 5.554052] scsi 2:0:0:0: Attached scsi generic sg4 type 0
[ 5.554074] scsi 3:0:0:0: Attached scsi generic sg5 type 0
[ 5.566577] Driver 'sd' needs updating - please use bus_type methods
[ 5.566625] sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
[ 5.566635] sd 0:0:0:0: [sda] Write Protect is off
[ 5.566637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.566653] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.569775] sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
[ 5.569788] sd 0:0:0:0: [sda] Write Protect is off
[ 5.569790] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.569807] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.569809] sda: sda1
[ 5.671784] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.671835] sd 0:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[ 5.671845] sd 0:0:1:0: [sdb] Write Protect is off
[ 5.671847] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.671864] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.671898] sd 0:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[ 5.671907] sd 0:0:1:0: [sdb] Write Protect is off
[ 5.671909] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.671925] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.671928] sdb: sdb1 sdb2 < sdb5 > sdb3
[ 5.696349] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 5.696402] sd 1:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 5.696417] sd 1:0:0:0: [sdc] Write Protect is off
[ 5.696420] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.696445] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.696486] sd 1:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 5.696495] sd 1:0:0:0: [sdc] Write Protect is off
[ 5.696497] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.696514] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.696516] sdc: sdc1
[ 5.713281] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 5.713334] sd 1:0:1:0: [sdd] 488397168 512-byte hardware sectors (250059 MB)
[ 5.713344] sd 1:0:1:0: [sdd] Write Protect is off
[ 5.713346] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 5.713363] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.713395] sd 1:0:1:0: [sdd] 488397168 512-byte hardware sectors (250059 MB)
[ 5.713404] sd 1:0:1:0: [sdd] Write Protect is off
[ 5.713406] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 5.713423] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.713425] sdd:<6>ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL12, max UDMA/33
[ 5.720374] ata5.01: ATAPI: Optiarc DVD RW AD-7203A, 1.06, max UDMA/66
[ 5.735309] sdd1
[ 5.735379] sd 1:0:1:0: [sdd] Attached SCSI disk
[ 5.735433] sd 2:0:0:0: [sde] 1250263728 512-byte hardware sectors (640135 MB)
[ 5.735442] sd 2:0:0:0: [sde] Write Protect is off
[ 5.735444] sd 2:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 5.735461] sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.735496] sd 2:0:0:0: [sde] 1250263728 512-byte hardware sectors (640135 MB)
[ 5.735505] sd 2:0:0:0: [sde] Write Protect is off
[ 5.735507] sd 2:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 5.735524] sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.735526] sde:<6>ata5.00: configured for UDMA/33
[ 5.747129] sde1
[ 5.747201] sd 2:0:0:0: [sde] Attached SCSI disk
[ 5.747253] sd 3:0:0:0: [sdf] 1250263728 512-byte hardware sectors (640135 MB)
[ 5.747263] sd 3:0:0:0: [sdf] Write Protect is off
[ 5.747265] sd 3:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 5.747281] sd 3:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.747315] sd 3:0:0:0: [sdf] 1250263728 512-byte hardware sectors (640135 MB)
[ 5.747325] sd 3:0:0:0: [sdf] Write Protect is off
[ 5.747326] sd 3:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 5.747343] sd 3:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.747345] sdf:<6>ata5.01: configured for UDMA/66
[ 5.762287] sdf1
[ 5.762355] sd 3:0:0:0: [sdf] Attached SCSI disk
[ 5.922928] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL12 PQ: 0 ANSI: 5
[ 5.923037] scsi 4:0:0:0: Attached scsi generic sg6 type 5
[ 5.924660] scsi 4:0:1:0: CD-ROM Optiarc DVD RW AD-7203A 1.06 PQ: 0 ANSI: 5
[ 5.924717] scsi 4:0:1:0: Attached scsi generic sg7 type 5
[ 5.959294] Driver 'sr' needs updating - please use bus_type methods
[ 5.968076] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.968078] Uniform CD-ROM driver Revision: 3.20
[ 5.968136] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 5.973054] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.973122] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 6.341113] PM: Starting manual resume from disk
[ 6.341115] PM: Resume from partition 8:17
[ 6.341116] PM: Checking hibernation image.
[ 6.341255] PM: Resume from disk failed.
[ 6.369472] kjournald starting. Commit interval 5 seconds
[ 6.369477] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.277276] udevd version 124 started
[ 11.517923] Linux agpgart interface v0.103
[ 11.565689] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.584077] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.649878] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 11.683815] ACPI: Power Button (FF) [PWRF]
[ 11.683881] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 11.708511] ACPI: Power Button (CM) [PWRB]
[ 12.102132] nvidia: module license 'NVIDIA' taints kernel.
[ 12.355836] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.355842] nvidia 0000:01:00.0: setting latency timer to 64
[ 12.355922] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov 4 13:35:57 PST 2008
[ 12.385836] udev: renamed network interface eth1 to eth0
[ 12.388375] udev: renamed network interface eth0_rename to eth1
[ 12.425156] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 12.445334] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.445351] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.494090] rtusb init --->
[ 12.503963]
[ 12.503964]
[ 12.503964] === pAd = f8c18000, size = 566744 ===
[ 12.503965]
[ 12.503966] <-- RTMPAllocAdapterBlock, Status=0
[ 12.504193] usbcore: registered new interface driver rt2870
[ 12.516763] Linux video capture interface: v2.00
[ 12.565139] gspca: main v2.2.0 registered
[ 12.574716] usbcore: registered new interface driver lmpcm_usb
[ 12.575105] lmpcm_usb: v0.5.5:USB Logitech MediaPlay Cordless Mouse driver
[ 12.576019] gspca: probing 093a:2468
[ 12.578496] pac207: Pixart Sensor ID 0x27 Chips ID 0x00
[ 12.578497] pac207: Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x093A:0x2468)
[ 12.582562] gspca: probe ok
[ 12.582574] usbcore: registered new interface driver pac207
[ 12.582583] pac207: registered
[ 12.604307] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10B5
[ 12.604322] usbcore: registered new interface driver usblp
[ 18.295121] lp: driver loaded but no devices found
[ 18.383800] Adding 3903752k swap on /dev/sdb1. Priority:-1 extents:1 across:3903752k
[ 18.916586] EXT3 FS on sdb5, internal journal
[ 19.818813] type=1505 audit(1236382585.612:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4535
[ 19.919327] type=1505 audit(1236382585.712:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4540
[ 19.919414] type=1505 audit(1236382585.712:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4540
[ 20.028658] ip_tables: (C) 2000-2006 Netfilter Core Team

[logari81]

δοκιμασε να τρεξεις

Κώδικας: Επιλογή όλων

gstreamer-properties

και εκει να αλλαξεις το video input για να δεις αν βελτιωθει κατι. Επίσης αν εχεις ενεργοποιημενα τα εφφε απενεργοποιησετα κια ξαναδοκιμασε.