speedtouch 121g wifi adapter

[apsou]

γεια σας
ειμαι και εγω νεος στο linux και εχω εντυπωσιαστει. Εχω ενα προβλημα με το wifi μου.
εχω κανει ολεσ τις διαδικασιες που βρηκα στον internet αλλα κατι δε παει καλα εχω κατεβασει τους windows drivers με το ndiswrapper τουσ εγκατεστησα βλεπει το δικτυο μου το speedtouch 121g συνδεομαι κανονικα αλλα δεν μπορω να μπω σε καμια σελιδα τι μπορει να φταιει

ευχαριστω

[logari81]

καταρχην το ndis_ra_per θα πρεπει να ειναι η ΤΕΛΕΥΤΑΙΑ σου επιλογη αν δεν βρεθει κατι αλλο. Για να σου πουμε αν πραγματικα το χρειαζεσαι δωσε μας το αποτελεσμα της εντολής

Κώδικας: Επιλογή όλων

lsusb

αν προκειται για usb συσκευη.

[apsou]

η εντολη δινει αυτο
ofos@ubuntu:~$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 06b9:0121 Alcatel Telecom SpeedTouch 121g Wireless Dongle
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

ευχαριστω γαι την αμεση απαντηση

[apsou]

το εμφανιζει αλλα δεν ειναι alcatel ειναι thomson speedtouch 121g δεν ξερω αν εχει σημασια αυτο

[logari81]

δεν ειναι alcatel, ειναι ότι γραφει το lsusb, το τι γραφουν αυτοι που το πουλανε πανω στο κουτι ειναι αλλη υποθεση.

ο υπευθυνος driver για αυτην την συσκευη ειναι αυτος εδω:
http://cateee.net/lkddb/web-lkddb/P54_USB.html

και τον εχεις ήδη επειδη όμως σε αντιστοιχες περιπτωσεις ειχαμε προβληματα με το firmware ποσταρε το αποτελεσμα του

Κώδικας: Επιλογή όλων

dmesg

[logari81]

Επισης βγαλε οτι βιαστηκες να βαλεις με το ndi_wr_pp_r. Δεν ειναι η σωστη λύση.

[apsou]

συγνωμη αλλα στο λινκ που μου εδωσες χαθηκα τι πρεπει να κανω πιο αρχειο πρεπει να κατεβασω
απεγκατεστησα τουσ driver που ειχα βαλει

[logari81]

δεν πρεπει να κατεβασεις τιποτα, διαβασε τι σου εγραψα.

[apsou]

.000000] DMA zone: 3963 pages, LIFO batch:0

[ 0.000000] Normal zone: 125780 pages, LIFO batch:31

[ 0.000000] ACPI: PM-Timer IO Port: 0x808

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)

[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])

[ 0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs

[ 0.000000] mapped APIC to ffffb000 (fee00000)

[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)

[ 0.000000] mapped IOAPIC to ffff9000 (fecc0000)

[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000

[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000

[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dee00000)

[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data

[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129743

[ 0.000000] Kernel command line: root=UUID=324CAA964CAA53FF loop=/ubuntu/disks/root.disk ro ROOTFLAGS=syncio quiet splash

[ 0.000000] Enabling fast FPU save and restore... done.

[ 0.000000] Enabling unmasked SIMD FPU exception support... done.

[ 0.000000] Initializing CPU#0

[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)

[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.

[ 0.000000] TSC: using PIT calibration value

[ 0.000000] Detected 2811.769 MHz processor.

[ 0.004000] Console: colour VGA+ 80x25

[ 0.004000] console [tty0] enabled

[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.004000] Memory: 505028k/523968k available (2572k kernel code, 18352k reserved, 1160k data, 424k init, 0k highmem)

[ 0.004000] virtual kernel memory layout:

[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)

[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)

[ 0.004000] vmalloc : 0xe0800000 - 0xff3fe000 ( 491 MB)

[ 0.004000] lowmem : 0xc0000000 - 0xdffb0000 ( 511 MB)

[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)

[ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB)

[ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB)

[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated

[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 5623.53 BogoMIPS (lpj=11247076)

[ 0.004036] Security Framework initialized

[ 0.004042] SELinux: Disabled at boot.

[ 0.004066] AppArmor: AppArmor initialized

[ 0.004079] Mount-cache hash table entries: 512

[ 0.004304] Initializing cgroup subsys ns

[ 0.004311] Initializing cgroup subsys cpuacct

[ 0.004315] Initializing cgroup subsys memory

[ 0.004341] CPU: Trace cache: 12K uops, L1 D cache: 16K

[ 0.004345] CPU: L2 cache: 256K

[ 0.004348] CPU: Hyper-Threading is disabled

[ 0.004353] using mwait in idle threads.

[ 0.004369] Checking 'hlt' instruction... OK.

[ 0.020683] SMP alternatives: switching to UP code

[ 0.030619] ACPI: Core revision 20080609

[ 0.034147] ACPI: Checking initramfs for custom DSDT

[ 0.394675] ENABLING IO-APIC IRQs

[ 0.394862] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.434557] CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 09

[ 0.436027] Brought up 1 CPUs

[ 0.436027] Total of 1 processors activated (5623.53 BogoMIPS).

[ 0.436027] CPU0 attaching sched-domain:

[ 0.436027] domain 0: span 0 level CPU

[ 0.436027] groups: 0

[ 0.436027] net_namespace: 840 bytes

[ 0.436027] Booting paravirtualized kernel on bare hardware

[ 0.436027] Time: 22:51:39 Date: 04/06/09

[ 0.436027] NET: Registered protocol family 16

[ 0.436027] EISA bus registered

[ 0.436027] ACPI: bus type pci registered

[ 0.436027] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255

[ 0.436027] PCI: Not using MMCONFIG.

[ 0.436027] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=128

[ 0.436027] PCI: Using configuration type 1 for base access

[ 0.436759] ACPI: EC: Look up EC in DSDT

[ 0.449287] ACPI: Interpreter enabled

[ 0.449294] ACPI: (supports S0 S1 S3 S4 S5)

[ 0.449321] ACPI: Using IOAPIC for interrupt routing

[ 0.449422] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255

[ 0.458359] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources

[ 0.458363] PCI: Using MMCONFIG for extended config space

[ 0.474258] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 0.474435] PCI: 0000:00:00.0 reg 10 32bit mmio: [f8000000, fbffffff]

[ 0.474955] pci 0000:00:01.0: supports D1

[ 0.475030] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold

[ 0.475037] pci 0000:00:02.0: PME# disabled

[ 0.475097] PCI: 0000:00:0f.0 reg 10 io port: [e000, e007]

[ 0.475106] PCI: 0000:00:0f.0 reg 14 io port: [dc00, dc03]

[ 0.475115] PCI: 0000:00:0f.0 reg 18 io port: [d880, d887]

[ 0.475124] PCI: 0000:00:0f.0 reg 1c io port: [d800, d803]

[ 0.475133] PCI: 0000:00:0f.0 reg 20 io port: [d480, d48f]

[ 0.475142] PCI: 0000:00:0f.0 reg 24 io port: [d000, d0ff]

[ 0.475231] PCI: 0000:00:0f.1 reg 20 io port: [fc00, fc0f]

[ 0.475335] PCI: 0000:00:10.0 reg 20 io port: [e080, e09f]

[ 0.475366] pci 0000:00:10.0: supports D1

[ 0.475368] pci 0000:00:10.0: supports D2

[ 0.475371] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.475376] pci 0000:00:10.0: PME# disabled

[ 0.475438] PCI: 0000:00:10.1 reg 20 io port: [e400, e41f]

[ 0.475470] pci 0000:00:10.1: supports D1

[ 0.475472] pci 0000:00:10.1: supports D2

[ 0.475474] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.475479] pci 0000:00:10.1: PME# disabled

[ 0.475541] PCI: 0000:00:10.2 reg 20 io port: [e480, e49f]

[ 0.475572] pci 0000:00:10.2: supports D1

[ 0.475574] pci 0000:00:10.2: supports D2

[ 0.475577] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.475582] pci 0000:00:10.2: PME# disabled

[ 0.475644] PCI: 0000:00:10.3 reg 20 io port: [ec00, ec1f]

[ 0.475675] pci 0000:00:10.3: supports D1

[ 0.475677] pci 0000:00:10.3: supports D2

[ 0.475680] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.475685] pci 0000:00:10.3: PME# disabled

[ 0.475723] PCI: 0000:00:10.4 reg 10 32bit mmio: [febff800, febff8ff]

[ 0.475779] pci 0000:00:10.4: supports D1

[ 0.475781] pci 0000:00:10.4: supports D2

[ 0.475783] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.475789] pci 0000:00:10.4: PME# disabled

[ 0.476009] PCI: 0000:00:12.0 reg 10 io port: [e800, e8ff]

[ 0.476019] PCI: 0000:00:12.0 reg 14 32bit mmio: [febffc00, febffcff]

[ 0.476086] pci 0000:00:12.0: supports D1

[ 0.476088] pci 0000:00:12.0: supports D2

[ 0.476091] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.476096] pci 0000:00:12.0: PME# disabled

[ 0.476255] PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff]

[ 0.476264] PCI: 0000:01:00.0 reg 14 32bit mmio: [d0000000, d7ffffff]

[ 0.476292] PCI: 0000:01:00.0 reg 30 32bit mmio: [fe8e0000, fe8fffff]

[ 0.476360] PCI: bridge 0000:00:01.0 32bit mmio: [fc800000, fe8fffff]

[ 0.476366] PCI: bridge 0000:00:01.0 32bit mmio pref: [cff00000, dfefffff]

[ 0.476437] PCI: bridge 0000:00:02.0 32bit mmio: [fe900000, fe9fffff]

[ 0.476459] bus 00 -> node 0

[ 0.476473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 0.477087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]

[ 0.477300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]

[ 0.498387] ACPI: PCI Root Bridge [PCI1] (0000:80)

[ 0.498575] PCI: 0000:80:01.0 reg 10 64bit mmio: [feafc000, feafffff]

[ 0.498630] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold

[ 0.498636] pci 0000:80:01.0: PME# disabled

[ 0.498690] bus 80 -> node 0

[ 0.498702] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]

[ 0.499323] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[ 0.499537] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[ 0.499744] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[ 0.499952] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)

[ 0.500182] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.500393] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.500604] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.500815] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[ 0.501210] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - C3, should be B6 [20080609]

[ 0.501224] Linux Plug and Play Support v0.97 (c) Adam Belay

[ 0.501309] pnp: PnP ACPI init

[ 0.501327] ACPI: bus type pnp registered

[ 0.511002] pnp: PnP ACPI: found 14 devices

[ 0.511009] ACPI: ACPI bus type pnp unregistered

[ 0.511015] PnPBIOS: Disabled by ACPI PNP

[ 0.511821] PCI: Using ACPI for IRQ routing

[ 0.512135] NET: Registered protocol family 8

[ 0.512135] NET: Registered protocol family 20

[ 0.512160] NetLabel: Initializing

[ 0.512164] NetLabel: domain hash size = 128

[ 0.512165] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.512187] NetLabel: unlabeled traffic allowed by default

[ 0.513316] tracer: 772 pages allocated for 65536 entries of 48 bytes

[ 0.513320] actual entries 65620

[ 0.513496] AppArmor: AppArmor Filesystem Enabled

[ 0.513525] ACPI: RTC can wake from S4

[ 0.513558] system 00:07: ioport range 0x295-0x296 has been reserved

[ 0.513558] system 00:07: ioport range 0x3e0-0x3e7 has been reserved

[ 0.513558] system 00:07: ioport range 0x4d0-0x4d1 has been reserved

[ 0.513558] system 00:07: ioport range 0x800-0x87f has been reserved

[ 0.513558] system 00:07: ioport range 0x400-0x41f has been reserved

[ 0.513558] system 00:07: iomem range 0xfeafc000-0xfeafffff has been reserved

[ 0.513558] system 00:07: iomem range 0xffb80000-0xffbfffff could not be reserved

[ 0.513558] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved

[ 0.513558] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved

[ 0.513558] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved

[ 0.513558] system 00:0c: iomem range 0x0-0x9ffff could not be reserved

[ 0.513558] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved

[ 0.513558] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved

[ 0.513558] system 00:0c: iomem range 0x100000-0x1fffffff could not be reserved

[ 0.513558] system 00:0c: iomem range 0xfff80000-0xffffffff could not be reserved

[ 0.549593] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

[ 0.549598] pci 0000:00:01.0: IO window: disabled

[ 0.549606] pci 0000:00:01.0: MEM window: 0xfc800000-0xfe8fffff

[ 0.549612] pci 0000:00:01.0: PREFETCH window: 0x000000cff00000-0x000000dfefffff

[ 0.549621] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02

[ 0.549624] pci 0000:00:02.0: IO window: disabled

[ 0.549631] pci 0000:00:02.0: MEM window: 0xfe900000-0xfe9fffff

[ 0.549637] pci 0000:00:02.0: PREFETCH window: disabled

[ 0.549661] pci 0000:00:01.0: setting latency timer to 64

[ 0.549679] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27

[ 0.549686] pci 0000:00:02.0: setting latency timer to 64

[ 0.549692] bus: 00 index 0 io port: [0, ffff]

[ 0.549695] bus: 00 index 1 mmio: [0, ffffffff]

[ 0.549698] bus: 01 index 0 mmio: [0, 0]

[ 0.549701] bus: 01 index 1 mmio: [fc800000, fe8fffff]

[ 0.549705] bus: 01 index 2 mmio: [cff00000, dfefffff]

[ 0.549707] bus: 01 index 3 mmio: [0, 0]

[ 0.549710] bus: 02 index 0 mmio: [0, 0]

[ 0.549712] bus: 02 index 1 mmio: [fe900000, fe9fffff]

[ 0.549714] bus: 02 index 2 mmio: [0, 0]

[ 0.549716] bus: 02 index 3 mmio: [0, 0]

[ 0.549719] bus: 80 index 0 io port: [0, ffff]

[ 0.549721] bus: 80 index 1 mmio: [0, ffffffff]

[ 0.549740] NET: Registered protocol family 2

[ 0.549976] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.550281] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[ 0.550342] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)

[ 0.550402] TCP: Hash tables configured (established 16384 bind 16384)

[ 0.550406] TCP reno registered

[ 0.550609] NET: Registered protocol family 1

[ 0.550778] checking if image is initramfs... it is

[ 1.052097] Switched to high resolution mode on CPU 0

[ 1.301613] Freeing initrd memory: 8243k freed

[ 1.303043] audit: initializing netlink socket (disabled)

[ 1.303065] type=2000 audit(1239058299.300:1): initialized

[ 1.308867] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[ 1.312893] VFS: Disk quotas dquot_6.5.1

[ 1.313073] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 1.313300] msgmni has been set to 1002

[ 1.313549] io scheduler noop registered

[ 1.313554] io scheduler anticipatory registered

[ 1.313557] io scheduler deadline registered

[ 1.313585] io scheduler cfq registered (default)

[ 1.313607] PCI: VIA PCI bridge detected.Disabling DAC.

[ 1.313727] pci 0000:01:00.0: Boot video device

[ 1.313955] pcieport-driver 0000:00:02.0: setting latency timer to 64

[ 1.314014] pcieport-driver 0000:00:02.0: found MSI capability

[ 1.314094] pci_express 0000:00:02.0:pcie00: allocate port service

[ 1.314192] pci_express 0000:00:02.0:pcie01: allocate port service

[ 1.314280] pci_express 0000:00:02.0:pcie02: allocate port service

[ 1.314365] pci_express 0000:00:02.0:pcie03: allocate port service

[ 1.318332] aer 0000:00:02.0:pcie01: service driver aer loaded

[ 1.319229] isapnp: Scanning for PnP cards...

[ 1.670966] isapnp: No Plug & Play device found

[ 1.793666] Serial: 8250/16550 driver4 ports, IRQ sharing enabled

[ 1.793873] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 1.795978] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 1.800214] brd: module loaded

[ 1.800378] input: Macintosh mouse button emulation as /devices/virtual/input/input0

[ 1.800615] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1

[ 1.800619] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

[ 1.800870] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 1.801814] mice: PS/2 mouse device common for all mice

[ 1.802239] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0

[ 1.802280] rtc0: alarms up to one year, y3k

[ 1.802569] EISA: Probing bus 0 at eisa.0

[ 1.802615] EISA: Detected 0 cards.

[ 1.802620] cpuidle: using governor ladder

[ 1.802623] cpuidle: using governor menu

[ 1.803370] TCP cubic registered

[ 1.803422] Using IPI No-Shortcut mode

[ 1.804248] registered taskstats version 1

[ 1.804407] Magic number: 5:112:906

[ 1.804492] tty ptyz2: hash matches

[ 1.804613] rtc_cmos 00:02: setting system clock to 2009-04-06 22:51:40 UTC (1239058300)

[ 1.804618] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 1.804620] EDD information not available.

[ 1.804964] Freeing unused kernel memory: 424k freed

[ 1.805030] Write protecting the kernel text: 2576k

[ 1.805069] Write protecting the kernel read-only data: 936k

[ 1.829293] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

[ 2.036216] fuse init (API version 7.9)

[ 2.281461] processor ACPI0007:00: registered as cooling_device0

[ 3.046077] No dock devices found.

[ 3.077415] SCSI subsystem initialized

[ 3.111576] libata version 3.00 loaded.

[ 3.118776] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21

[ 3.118840] pata_acpi 0000:00:0f.0: PCI INT B disabled

[ 3.138660] sata_via 0000:00:0f.0: version 2.3

[ 3.138682] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21

[ 3.138724] sata_via 0000:00:0f.0: routed to hard irq line 5

[ 3.141671] scsi0 : sata_via

[ 3.179566] scsi1 : sata_via

[ 3.182340] ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd480 irq 21

[ 3.182344] ata2: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd488 irq 21

[ 3.235077] usbcore: registered new interface driver usbfs

[ 3.235125] usbcore: registered new interface driver hub

[ 3.235209] usbcore: registered new device driver usb

[ 3.242574] USB Universal Host Controller Interface driver v3.0

[ 3.268359] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker

[ 3.384043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 3.548303] ata1.00: ATA-6: WDC WD2000JD-60KLB0, 08.05J08, max UDMA/100

[ 3.548309] ata1.00: 390721968 sectors, multi 16: LBA48

[ 3.564316] ata1.00: configured for UDMA/100

[ 3.768041] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)

[ 3.768245] scsi 0:0:0:0: Direct-Access ATA WDC WD2000JD-60K 08.0 PQ: 0 ANSI: 5

[ 3.768777] pata_via 0000:00:0f.1: version 0.3.3

[ 3.769457] scsi2 : pata_via

[ 3.769606] scsi3 : pata_via

[ 3.772583] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14

[ 3.772589] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15

[ 3.936461] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33

[ 3.952338] ata3.00: configured for UDMA/33

[ 4.112051] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5

[ 4.112271] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20

[ 4.112287] uhci_hcd 0000:00:10.0: UHCI Host Controller

[ 4.112362] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1

[ 4.112402] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e080

[ 4.112664] usb usb1: configuration #1 chosen from 1 choice

[ 4.112720] hub 1-0:1.0: USB hub found

[ 4.112734] hub 1-0:1.0: 2 ports detected

[ 4.221073] scsi 0:0:0:0: Attached scsi generic sg0 type 0

[ 4.221202] scsi 2:0:0:0: Attached scsi generic sg1 type 5

[ 4.259278] Driver 'sd' needs updating - please use bus_type methods

[ 4.259454] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)

[ 4.259492] sd 0:0:0:0: [sda] Write Protect is off

[ 4.259497] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 4.259553] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 4.259692] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)

[ 4.259726] sd 0:0:0:0: [sda] Write Protect is off

[ 4.259730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 4.259787] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 4.259794] sda: sda1

[ 4.268126] sd 0:0:0:0: [sda] Attached SCSI disk

[ 4.321595] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22

[ 4.321611] uhci_hcd 0000:00:10.1: UHCI Host Controller

[ 4.321663] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2

[ 4.321711] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e400

[ 4.321974] usb usb2: configuration #1 chosen from 1 choice

[ 4.322025] hub 2-0:1.0: USB hub found

[ 4.322039] hub 2-0:1.0: 2 ports detected

[ 4.432931] usb 1-2: new full speed USB device using uhci_hcd and address 2

[ 4.528932] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21

[ 4.528949] uhci_hcd 0000:00:10.2: UHCI Host Controller

[ 4.529002] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3

[ 4.529035] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e480

[ 4.529295] usb usb3: configuration #1 chosen from 1 choice

[ 4.529352] hub 3-0:1.0: USB hub found

[ 4.529368] hub 3-0:1.0: 2 ports detected

[ 4.601061] usb 1-2: configuration #1 chosen from 1 choice

[ 4.716026] usb 2-2: new low speed USB device using uhci_hcd and address 2

[ 4.736521] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23

[ 4.736538] uhci_hcd 0000:00:10.3: UHCI Host Controller

[ 4.736593] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4

[ 4.736633] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000ec00

[ 4.736895] usb usb4: configuration #1 chosen from 1 choice

[ 4.736942] hub 4-0:1.0: USB hub found

[ 4.736956] hub 4-0:1.0: 2 ports detected

[ 4.893020] usb 2-2: configuration #1 chosen from 1 choice

[ 4.944565] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21

[ 4.944591] ehci_hcd 0000:00:10.4: EHCI Host Controller

[ 4.944644] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5

[ 4.944699] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff800

[ 4.956027] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[ 4.956325] usb usb5: configuration #1 chosen from 1 choice

[ 4.956381] hub 5-0:1.0: USB hub found

[ 4.956395] hub 5-0:1.0: 8 ports detected

[ 5.112072] usb 1-2: USB disconnect, address 2

[ 5.164574] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23

[ 5.165017] eth0: VIA Rhine II at 0xfebffc00, 00:19:66:21:62:e8, IRQ 23.

[ 5.165726] eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.

[ 5.238459] Driver 'sr' needs updating - please use bus_type methods

[ 5.240084] usb 2-2: USB disconnect, address 2

[ 5.251856] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

[ 5.251865] Uniform CD-ROM driver Revision: 3.20

[ 5.252041] sr 2:0:0:0: Attached scsi CD-ROM sr0

[ 5.480030] usb 5-2: new high speed USB device using ehci_hcd and address 2

[ 5.617571] usb 5-2: configuration #1 chosen from 1 choice

[ 5.672130] usbcore: registered new interface driver hiddev

[ 5.672165] usbcore: registered new interface driver usbhid

[ 5.672177] usbhid: v2.6:USB HID core driver

[ 6.096040] usb 2-2: new low speed USB device using uhci_hcd and address 3

[ 6.108666] loop: module loaded

[ 6.155094] kjournald starting. Commit interval 5 seconds

[ 6.155123] EXT3-fs: mounted filesystem with ordered data mode.

[ 6.277052] usb 2-2: configuration #1 chosen from 1 choice

[ 6.293158] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0/input/input2

[ 6.294076] input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:10.1-2

[ 12.503359] udevd version 124 started

[ 13.301506] Linux agpgart interface v0.103

[ 13.308467] agpgart: Detected VIA PT880 Ultra chipset

[ 13.352487] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000

[ 13.475603] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 13.537296] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 13.904180] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3

[ 13.916129] ACPI: Power Button (FF) [PWRF]

[ 13.916361] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4

[ 13.931694] ACPI: Power Button (CM) [PWRB]

[ 14.610321] parport_pc 00:06: reported by Plug and Play ACPI

[ 14.610440] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]

[ 16.020303] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)

[ 16.264892] input: PC Speaker as /devices/platform/pcspkr/input/input5

[ 16.303220] usbcore: registered new interface driver ndiswrapper

[ 16.503517] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[ 16.503559] HDA Intel 0000:80:01.0: setting latency timer to 64

[ 16.503566] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device

[ 16.533948] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...

[ 19.584362] lp0: using parport0 (interrupt-driven).

[ 20.329326] EXT3 FS on loop0, internal journal

[ 43.259257] Adding 976552k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:5 across:31029632k

[ 43.452146] type=1505 audit(1239047542.087:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4040

[ 43.669668] type=1505 audit(1239047542.303:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4045

[ 43.669977] type=1505 audit(1239047542.303:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4045

[ 43.832778] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 44.481429] ACPI: WMI: Mapper loaded

[ 45.648991] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)

[ 45.714613] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)

[ 45.714628] apm: overridden by ACPI.

[ 45.880076] ppdev: user-space parallel port driver

[ 47.194907] Bluetooth: Core ver 2.13

[ 47.198134] NET: Registered protocol family 31

[ 47.198145] Bluetooth: HCI device and connection manager initialized

[ 47.198149] Bluetooth: HCI socket layer initialized

[ 47.222348] Bluetooth: L2CAP ver 2.11

[ 47.222361] Bluetooth: L2CAP socket layer initialized

[ 47.238602] Bluetooth: SCO (Voice Link) ver 0.6

[ 47.238614] Bluetooth: SCO socket layer initialized

[ 47.259810] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 47.259822] Bluetooth: BNEP filters: protocol multicast

[ 47.303875] Bridge firewalling registered

[ 47.305462] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.

[ 47.322676] Bluetooth: RFCOMM socket layer initialized

[ 47.323873] Bluetooth: RFCOMM TTY layer initialized

[ 47.323885] Bluetooth: RFCOMM ver 1.10

[ 51.480790] eth0: link down

[ 52.637630] hda-intel: Invalid position buffer, using LPIB read method instead.

[ 68.018914] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.

[ 92.424029] usb 5-8: new high speed USB device using ehci_hcd and address 4

[ 92.492351] hub 5-0:1.0: unable to enumerate USB device on port 8

[ 92.828094] usb 5-8: new high speed USB device using ehci_hcd and address 5

[ 92.991888] usb 5-8: configuration #1 chosen from 1 choice

[ 93.195099] usbcore: registered new interface driver libusual

[ 93.235575] Initializing USB Mass Storage driver...

[ 93.239170] scsi4 : SCSI emulation for USB Mass Storage devices

[ 93.240150] usbcore: registered new interface driver usb-storage

[ 93.241694] USB Mass Storage support registered.

[ 93.242921] usb-storage: device found at 5

[ 93.242929] usb-storage: waiting for device to settle before scanning

[ 98.240308] usb-storage: device scan complete

[ 98.241791] scsi 4:0:0:0: Direct-Access USB FLASH DRIVE PMAP PQ: 0 ANSI: 0 CCS

[ 98.872235] sd 4:0:0:0: [sdb] 8060928 512-byte hardware sectors (4127 MB)

[ 98.873240] sd 4:0:0:0: [sdb] Write Protect is off

[ 98.873250] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00

[ 98.873254] sd 4:0:0:0: [sdb] Assuming drive cache: write through

[ 98.879274] sd 4:0:0:0: [sdb] 8060928 512-byte hardware sectors (4127 MB)

[ 98.880265] sd 4:0:0:0: [sdb] Write Protect is off

[ 98.880274] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00

[ 98.880278] sd 4:0:0:0: [sdb] Assuming drive cache: write through

[ 98.880921] sdb: sdb1

[ 98.882480] sd 4:0:0:0: [sdb] Attached SCSI removable disk

[ 98.883124] sd 4:0:0:0: Attached scsi generic sg2 type 0

[ 150.052502] ppdev0: registered pardevice

[ 150.140331] ppdev0: unregistered pardevice

[ 150.200125] ppdev0: registered pardevice

[ 150.248038] ppdev0: unregistered pardevice

lofos@ubuntu:~$

[apsou]

οπως σου ειπα απεγκατεστησα τους drivers που ειχα βαλει με το ndiswrapper
και τωα δεν το αναγνωριζει