Το 9.10 δεν επικοινωνεί με το modem

...κάρτες δικτύου, modems, προβλήματα internet
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα των εντολών στο τερματικό :
lspci -nn
lsusb
rfkill list

Το 9.10 δεν επικοινωνεί με το modem

Δημοσίευσηαπό taso$_G » 28 Νοέμ 2009, 21:43

Λοιπόν το πρόβλημα είναι ότι στο 9.10 δεν μπορεί να υπάρξει επικοινωνία με το modem.
To modem είναι σειριακό US Robotics και συμβαίνει το εξής κουφό: στο 9.04 λειτουργεί άψογα, το χρησιμοποιώ με το fax software efax-gtk, στο 9.10 το efax δεν μπορεί να συνδεθεί με το modem βγάζοντας το εξής :
Κώδικας: Επιλογή όλων
efax-0.9a: 13:10:26 Error: modem command (Z) failed
efax-0.9a: 13:10:27 finished - invalid modem respons

Το περίεργο είναι ότι έκανα μια δοκιμή κάνοντας μια πρόχειρη εγκατάσταση του 9.04 όπου το efax δεν είχε πρόβλημα με το modem και όταν έκανα αναβάθμιση σε 9.10 και κει το efax κόλλησε βγάζοντας το πιο πάνω μήνυμα. Ιδέες?
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 10.04
Προδιαγραφές: INTEL Core2Duo E8400 |Kingston SSD 64G & 40G | 4G | ATI Radeon HD 2400 Pro | NEC LCD19wv
taso$_G
babeTUX
babeTUX
 
Δημοσιεύσεις: 33
Εγγραφή: 08 Νοέμ 2009, 14:53
Εκτύπωση

Re: Το 9.10 δεν επικοινωνεί με το modem

Δημοσίευσηαπό GeorgeVita » 30 Νοέμ 2009, 12:45

Γειά σου taso$_G, μια ιδέα:
Συνηθισμένη εντολή για 'soft reset' των modems είναι η ATZ
Μερικά προγράμματα θεωρούν την προσθήκη 'ΑΤ' σαν default και δεν την τοποθετούν στα 'init strings'.

Στο 'Error: modem command (Z) failed ' πιθανό είναι το modem να έλαβε Ζ αντί ΑΤΖ

Βρές αν υπάρχουν παράμετροι για τα 'init strings' και έλεγξε/μετέτρεψέ το σε ATZ. Ακόμη να είσαι σίγουρος ότι το Z είναι λατινικός χαρακτήρας και όχι ελληνικό 'ζήτα'.

Φιλικά,
Γιώργος
Άβαταρ μέλους
GeorgeVita
babeTUX
babeTUX
 
Δημοσιεύσεις: 100
Εγγραφή: 26 Αύγ 2008, 14:33
Εκτύπωση

Re: Το 9.10 δεν επικοινωνεί με το modem

Δημοσίευσηαπό logari81 » 30 Νοέμ 2009, 12:48

επισης δώσε μας τα αποτελεσματα των εντολών
Κώδικας: Επιλογή όλων
dmesg
lsmod
απο το 9.04 και απο το 9.10 για να συγκρινουμε τι άλλαξε σε επιπεδο οδηγων.
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Re: Το 9.10 δεν επικοινωνεί με το modem

Δημοσίευσηαπό taso$_G » 30 Νοέμ 2009, 20:45

dmesg στο 9.04 :

Κώδικας: Επιλογή όλων
[ 0.432361] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.432362] pci 0000:00:1c.0: IO window: disabled
[ 0.432365] pci 0000:00:1c.0: MEM window: disabled
[ 0.432368] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.432373] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 0.432375] pci 0000:00:1c.3: IO window: 0xa000-0xafff
[ 0.432379] pci 0000:00:1c.3: MEM window: 0xd0200000-0xd02fffff
[ 0.432382] pci 0000:00:1c.3: PREFETCH window: 0x000000d0400000-0x000000d04fffff
[ 0.432386] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.432389] pci 0000:00:1e.0: IO window: 0x9000-0x9fff
[ 0.432392] pci 0000:00:1e.0: MEM window: 0xd0100000-0xd01fffff
[ 0.432395] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.432404] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.432407] pci 0000:00:01.0: setting latency timer to 64
[ 0.432412] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.432415] pci 0000:00:1c.0: setting latency timer to 64
[ 0.432421] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.432424] pci 0000:00:1c.3: setting latency timer to 64
[ 0.432429] pci 0000:00:1e.0: setting latency timer to 64
[ 0.432431] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.432433] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.432434] bus: 01 index 0 io port: [0xb000-0xbfff]
[ 0.432435] bus: 01 index 1 mmio: [0xc0000000-0xd00fffff]
[ 0.432437] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.432438] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.432439] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.432440] bus: 02 index 1 mmio: [0x0-0x0]
[ 0.432441] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.432442] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.432443] bus: 03 index 0 io port: [0xa000-0xafff]
[ 0.432445] bus: 03 index 1 mmio: [0xd0200000-0xd02fffff]
[ 0.432446] bus: 03 index 2 mmio: [0xd0400000-0xd04fffff]
[ 0.432447] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.432448] bus: 04 index 0 io port: [0x9000-0x9fff]
[ 0.432450] bus: 04 index 1 mmio: [0xd0100000-0xd01fffff]
[ 0.432451] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.432452] bus: 04 index 3 io port: [0x00-0xffff]
[ 0.432453] bus: 04 index 4 mmio: [0x000000-0xffffffff]
[ 0.432458] NET: Registered protocol family 2
[ 0.444015] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.444196] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.444405] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.444509] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.444510] TCP reno registered
[ 0.448019] NET: Registered protocol family 1
[ 0.448115] checking if image is initramfs... it is
[ 0.848780] Freeing initrd memory: 7385k freed
[ 0.848920] cpufreq: No nForce2 chipset.
[ 0.849015] audit: initializing netlink socket (disabled)
[ 0.849032] type=2000 audit(1259600540.847:1): initialized
[ 0.853908] highmem bounce pool size: 64 pages
[ 0.853911] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.854751] VFS: Disk quotas dquot_6.5.1
[ 0.854787] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.855169] fuse init (API version 7.10)
[ 0.855221] msgmni has been set to 1671
[ 0.855333] alg: No test for stdrng (krng)
[ 0.855340] io scheduler noop registered
[ 0.855342] io scheduler anticipatory registered
[ 0.855343] io scheduler deadline registered
[ 0.855352] io scheduler cfq registered (default)
[ 0.932488] Switched to high resolution mode on CPU 1
[ 0.935737] Switched to high resolution mode on CPU 0
[ 8.852007] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 16.852007] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 16.852123] pci 0000:01:00.0: Boot video device
[ 16.853701] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 16.853723] pcieport-driver 0000:00:01.0: found MSI capability
[ 16.853739] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 16.853745] pci_express 0000:00:01.0:pcie00: allocate port service
[ 16.853754] pci_express 0000:00:01.0:pcie03: allocate port service
[ 16.853784] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 16.853809] pcieport-driver 0000:00:1c.0: found MSI capability
[ 16.853827] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 16.853835] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 16.853843] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 16.853850] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 16.853890] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 16.853916] pcieport-driver 0000:00:1c.3: found MSI capability
[ 16.853933] pcieport-driver 0000:00:1c.3: irq 2301 for MSI/MSI-X
[ 16.853942] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 16.853950] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 16.853959] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 16.854008] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.854403] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 16.854496] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 16.854498] ACPI: Power Button (FF) [PWRF]
[ 16.854532] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 16.854539] ACPI: Power Button (CM) [PWRB]
[ 16.854751] ACPI: SSDT BFD61C18, 02CC (r1 AMI IST 1 MSFT 3000001)
[ 16.855058] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 16.855073] processor ACPI_CPU:00: registered as cooling_device0
[ 16.855240] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 16.855252] processor ACPI_CPU:01: registered as cooling_device1
[ 16.856354] isapnp: Scanning for PnP cards...
[ 17.209460] isapnp: No Plug & Play device found
[ 17.216596] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 17.216688] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.216915] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.217022] serial 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 17.217091] 0000:04:00.0: ttyS1 at I/O 0x9050 (irq = 21) is a 16550A
[ 17.217169] 0000:04:00.0: ttyS2 at I/O 0x9040 (irq = 21) is a 16550A
[ 17.217597] brd: module loaded
[ 17.217790] loop: module loaded
[ 17.217832] Fixed MDIO Bus: probed
[ 17.217837] PPP generic driver version 2.4.2
[ 17.217869] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 17.217887] Driver 'sd' needs updating - please use bus_type methods
[ 17.217893] Driver 'sr' needs updating - please use bus_type methods
[ 17.217941] ata_piix 0000:00:1f.2: version 2.12
[ 17.217948] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 17.217950] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 17.217984] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 17.218024] scsi0 : ata_piix
[ 17.218068] scsi1 : ata_piix
[ 17.218096] ata1: SATA max UDMA/133 cmd 0xc1b0 ctl 0xc1a0 bmdma 0xc170 irq 19
[ 17.218100] ata2: SATA max UDMA/133 cmd 0xc190 ctl 0xc180 bmdma 0xc178 irq 19
[ 18.012058] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 18.012071] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.028232] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100
[ 18.055627] ata1.01: ATA-8: ST3160813AS, CC2H, max UDMA/133
[ 18.055629] ata1.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 18.068246] ata1.00: configured for UDMA/100
[ 18.127625] ata1.01: configured for UDMA/133
[ 18.920058] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.920069] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 18.928306] ata2.00: ATA-7: KINGSTON SSDNow 40GB, 2CV102HA, max UDMA/133
[ 18.928309] ata2.00: 78125000 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 18.936329] ata2.00: configured for UDMA/133
[ 18.936985] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB00 PQ: 0 ANSI: 5
[ 18.940489] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 18.940492] Uniform CD-ROM driver Revision: 3.20
[ 18.940569] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 18.940604] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 18.940667] scsi 0:0:1:0: Direct-Access ATA ST3160813AS CC2H PQ: 0 ANSI: 5
[ 18.940722] sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 18.940732] sd 0:0:1:0: [sda] Write Protect is off
[ 18.940734] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 18.940749] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.940781] sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 18.940790] sd 0:0:1:0: [sda] Write Protect is off
[ 18.940792] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 18.940806] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.940808] sda: sda1 sda2 sda3 sda4
[ 18.973270] sd 0:0:1:0: [sda] Attached SCSI disk
[ 18.973307] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 18.973350] scsi 1:0:0:0: Direct-Access ATA KINGSTON SSDNow 2CV1 PQ: 0 ANSI: 5
[ 18.973400] sd 1:0:0:0: [sdb] 78125000 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 18.973409] sd 1:0:0:0: [sdb] Write Protect is off
[ 18.973411] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 18.973426] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.973457] sd 1:0:0:0: [sdb] 78125000 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 18.973466] sd 1:0:0:0: [sdb] Write Protect is off
[ 18.973467] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 18.973482] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.973484] sdb: sdb1 sdb2 < sdb5 sdb6 >
[ 18.974291] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 18.974331] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 18.974342] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 18.974345] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 18.974371] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 18.974401] scsi2 : ata_piix
[ 18.974438] scsi3 : ata_piix
[ 18.974462] ata3: SATA max UDMA/133 cmd 0xc150 ctl 0xc140 bmdma 0xc110 irq 19
[ 18.974465] ata4: SATA max UDMA/133 cmd 0xc130 ctl 0xc120 bmdma 0xc118 irq 19
[ 19.302739] ata3: SATA link down (SStatus 0 SControl 300)
[ 19.630740] ata4: SATA link down (SStatus 0 SControl 300)
[ 19.631156] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 19.631169] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 19.631178] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 19.631181] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 19.631213] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 19.635102] ehci_hcd 0000:00:1a.7: debug port 1
[ 19.635106] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 19.635115] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0325400
[ 19.648007] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 19.648064] usb usb1: configuration #1 chosen from 1 choice
[ 19.648090] hub 1-0:1.0: USB hub found
[ 19.648101] hub 1-0:1.0: 6 ports detected
[ 19.648191] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 19.648198] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 19.648200] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 19.648224] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 19.652127] ehci_hcd 0000:00:1d.7: debug port 1
[ 19.652131] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 19.652140] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0325000
[ 19.664008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 19.664056] usb usb2: configuration #1 chosen from 1 choice
[ 19.664078] hub 2-0:1.0: USB hub found
[ 19.664084] hub 2-0:1.0: 6 ports detected
[ 19.664175] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 19.664185] uhci_hcd: USB Universal Host Controller Interface driver
[ 19.664197] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.664201] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 19.664203] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 19.664233] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 19.664258] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c0c0
[ 19.664301] usb usb3: configuration #1 chosen from 1 choice
[ 19.664316] hub 3-0:1.0: USB hub found
[ 19.664320] hub 3-0:1.0: 2 ports detected
[ 19.664373] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 19.664377] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 19.664380] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 19.664406] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 19.664431] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c0a0
[ 19.664476] usb usb4: configuration #1 chosen from 1 choice
[ 19.664491] hub 4-0:1.0: USB hub found
[ 19.664496] hub 4-0:1.0: 2 ports detected
[ 19.664548] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 19.664552] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 19.664555] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 19.664582] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 19.664601] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000c080
[ 19.664645] usb usb5: configuration #1 chosen from 1 choice
[ 19.664659] hub 5-0:1.0: USB hub found
[ 19.664664] hub 5-0:1.0: 2 ports detected
[ 19.664715] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 19.664719] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 19.664722] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 19.664749] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 19.664767] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c060
[ 19.664813] usb usb6: configuration #1 chosen from 1 choice
[ 19.664832] hub 6-0:1.0: USB hub found
[ 19.664836] hub 6-0:1.0: 2 ports detected
[ 19.664890] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 19.664894] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 19.664896] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 19.664922] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 19.664940] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c040
[ 19.664985] usb usb7: configuration #1 chosen from 1 choice
[ 19.665000] hub 7-0:1.0: USB hub found
[ 19.665004] hub 7-0:1.0: 2 ports detected
[ 19.665057] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 19.665061] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 19.665064] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 19.665090] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 19.665109] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c020
[ 19.665151] usb usb8: configuration #1 chosen from 1 choice
[ 19.665166] hub 8-0:1.0: USB hub found
[ 19.665170] hub 8-0:1.0: 2 ports detected
[ 19.665253] PNP: No PS/2 controller found. Probing ports directly.
[ 19.669633] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.669636] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 19.672532] mice: PS/2 mouse device common for all mice
[ 19.684547] rtc_cmos 00:05: RTC can wake from S4
[ 19.684573] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 19.684594] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 19.684646] device-mapper: uevent: version 1.0.3
[ 19.684702] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 19.684742] device-mapper: multipath: version 1.0.5 loaded
[ 19.684744] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 19.684786] EISA: Probing bus 0 at eisa.0
[ 19.684810] EISA: Detected 0 cards.
[ 19.684878] cpuidle: using governor ladder
[ 19.684949] cpuidle: using governor menu
[ 19.685258] TCP cubic registered
[ 19.685318] NET: Registered protocol family 10
[ 19.685587] lo: Disabled Privacy Extensions
[ 19.685791] NET: Registered protocol family 17
[ 19.685802] Bluetooth: L2CAP ver 2.11
[ 19.685803] Bluetooth: L2CAP socket layer initialized
[ 19.685805] Bluetooth: SCO (Voice Link) ver 0.6
[ 19.685806] Bluetooth: SCO socket layer initialized
[ 19.685822] Bluetooth: RFCOMM socket layer initialized
[ 19.685826] Bluetooth: RFCOMM TTY layer initialized
[ 19.685827] Bluetooth: RFCOMM ver 1.10
[ 19.685844] Marking TSC unstable due to TSC halts in idle
[ 19.686095] Using IPI No-Shortcut mode
[ 19.686136] registered taskstats version 1
[ 19.686219] Magic number: 1:52:38
[ 19.686224] bdi 7:3: hash matches
[ 19.686264] rtc_cmos 00:05: setting system clock to 2009-11-30 17:02:40 UTC (1259600560)
[ 19.686266] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 19.686267] EDD information not available.
[ 19.686445] Freeing unused kernel memory: 532k freed
[ 19.686535] Write protecting the kernel text: 4120k
[ 19.686569] Write protecting the kernel read-only data: 1524k
[ 19.793250] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 19.793252] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 19.793297] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 19.793305] e1000e 0000:00:19.0: setting latency timer to 64
[ 19.793412] e1000e 0000:00:19.0: irq 2300 for MSI/MSI-X
[ 19.808314] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 19.808326] r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 19.808341] r8169 0000:03:00.0: setting latency timer to 64
[ 19.808448] r8169 0000:03:00.0: irq 2299 for MSI/MSI-X
[ 19.808860] eth0: RTL8168b/8111b at 0xf7c84000, 00:1d:0f:bf:20:f0, XID 38000000 IRQ 2299
[ 19.840976] ohci1394 0000:04:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 19.892688] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[22] MMIO=[d0100000-d01007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 19.942731] 0000:00:19.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:8f:5b:e9
[ 19.942733] 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection
[ 19.942765] 0000:00:19.0: eth1: MAC: 6, PHY: 8, PBA No: ffffff-0ff
[ 19.960516] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 20.092852] usb 1-2: configuration #2 chosen from 1 choice
[ 20.208039] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 20.317049] PM: Starting manual resume from disk
[ 20.317051] PM: Resume from partition 8:22
[ 20.317052] PM: Checking hibernation image.
[ 20.317273] PM: Resume from disk failed.
[ 20.320154] EXT4-fs: barriers enabled
[ 20.320425] kjournald2 starting. Commit interval 5 seconds
[ 20.320430] EXT4-fs: delayed allocation enabled
[ 20.320431] EXT4-fs: file extents enabled
[ 20.320816] EXT4-fs: mballoc enabled
[ 20.320819] EXT4-fs: mounted filesystem with ordered data mode.
[ 20.338340] usb 1-4: configuration #1 chosen from 1 choice
[ 20.728040] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 20.899936] udev: starting version 141
[ 20.905777] usb 5-1: configuration #1 chosen from 1 choice
[ 20.918726] usbcore: registered new interface driver hiddev
[ 20.932413] Linux agpgart interface v0.103
[ 20.932799] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3
[ 20.956255] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.2-1/input0
[ 20.971931] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 20.991090] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input4
[ 21.000476] [fglrx] Maximum main memory to use for locked dma buffers: 2874 MBytes.
[ 21.000554] [fglrx] vendor: 1002 device: 94c3 count: 1
[ 21.000817] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
[ 21.000829] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.000833] pci 0000:01:00.0: setting latency timer to 64
[ 21.003326] [fglrx] Driver built-in PAT support is enabled successfully
[ 21.003350] [fglrx] module loaded - fglrx 8.60.40 [Mar 14 2009] with 1 minors
[ 21.016560] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-1/input1
[ 21.016641] usbcore: registered new interface driver usbhid
[ 21.016644] usbhid: v2.6:USB HID core driver
[ 21.020097] iTCO_vendor_support: vendor-support=0
[ 21.048791] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 21.048965] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
[ 21.049038] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.050968] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 21.090992] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 21.091035] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 21.148567] usb 5-2: new low speed USB device using uhci_hcd and address 3
[ 21.166774] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 21.166832] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 21.189542] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.192159] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00902700023c3873]
[ 21.205664] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 21.205811] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 21.205812] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 21.205813] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 21.322723] usb 5-2: configuration #1 chosen from 1 choice
[ 21.343938] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input6
[ 21.349050] generic-usb 0003:046D:C50E.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1a.2-2/input0
[ 21.568363] lp: driver loaded but no devices found
[ 21.621893] Adding 5518288k swap on /dev/sdb6. Priority:-1 extents:1 across:5518288k
[ 22.143795] EXT4 FS on sdb1, internal journal on sdb1:8
[ 22.746652] EXT4-fs: barriers enabled
[ 22.746976] kjournald2 starting. Commit interval 5 seconds
[ 22.748813] EXT4 FS on sdb5, internal journal on sdb5:8
[ 22.748814] EXT4-fs: delayed allocation enabled
[ 22.748815] EXT4-fs: file extents enabled
[ 22.749765] EXT4-fs: mballoc enabled
[ 22.749767] EXT4-fs: mounted filesystem with ordered data mode.
[ 22.833018] type=1505 audit(1259600563.645:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2197
[ 22.860804] type=1505 audit(1259600563.673:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2201
[ 22.860852] type=1505 audit(1259600563.673:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2201
[ 22.860878] type=1505 audit(1259600563.673:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2201
[ 22.860903] type=1505 audit(1259600563.673:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2201
[ 22.938050] type=1505 audit(1259600563.749:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2206
[ 22.938131] type=1505 audit(1259600563.749:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2206
[ 22.954249] type=1505 audit(1259600563.766:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2210
[ 23.883826] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.883828] Bluetooth: BNEP filters: protocol multicast
[ 23.889517] Bridge firewalling registered
[ 24.482918] ppdev: user-space parallel port driver
[ 27.622852] fglrx_pci 0000:01:00.0: irq 2298 for MSI/MSI-X
[ 27.630675] [fglrx] Firegl kernel thread PID: 3297
[ 27.636368] [fglrx] Gart USWC size:1446 M.
[ 27.636370] [fglrx] Gart cacheable size:60 M.
[ 27.636373] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 27.636375] [fglrx] Reserved FB block: Unshared offset:fcff000, size:2fd000
[ 27.636376] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000
[ 28.190698] r8169: eth0: link up
[ 28.190704] r8169: eth0: link up
[ 29.200162] e1000e 0000:00:19.0: irq 2300 for MSI/MSI-X
[ 29.257198] e1000e 0000:00:19.0: irq 2300 for MSI/MSI-X
[ 29.257431] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 30.833267] 0000:00:19.0: eth1: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 30.833269] 0000:00:19.0: eth1: 10/100 speed: disabling TSO
[ 30.833411] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 37.528820] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 37.528837] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 37.528848] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 37.528859] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 37.528870] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 38.248038] eth0: no IPv6 routers present
[ 41.612540] eth1: no IPv6 routers present
[ 90.432042] Clocksource tsc unstable (delta = -75416527 ns)
[ 108.599523] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 233.691878] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 343.794742] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[ 345.797068] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[ 346.798171] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[ 347.799320] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[ 359.811657] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=218 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=198
[ 361.814050] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=218 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=198
[ 363.816290] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=218 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=198
[ 365.818520] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=218 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=198
[ 367.820111] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=218 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=198
[ 367.820132] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 369.822500] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 370.823633] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 371.824632] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 372.825821] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 374.828048] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 375.828602] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 376.829747] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 377.830937] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=206 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=186
[ 387.841125] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 387.841150] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=236 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=216
[ 628.068685] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 628.068709] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=236 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=216
[ 928.357142] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 928.357168] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=236 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=216
[ 1288.601598] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 1288.601623] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=236 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=216
[ 1708.993576] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 1708.993602] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=236 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=216
[ 2189.450368] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 2189.450394] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=236 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=216
boss@Ubuntu9:~$
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 10.04
Προδιαγραφές: INTEL Core2Duo E8400 |Kingston SSD 64G & 40G | 4G | ATI Radeon HD 2400 Pro | NEC LCD19wv
taso$_G
babeTUX
babeTUX
 
Δημοσιεύσεις: 33
Εγγραφή: 08 Νοέμ 2009, 14:53
Εκτύπωση

Re: Το 9.10 δεν επικοινωνεί με το modem

Δημοσίευσηαπό taso$_G » 30 Νοέμ 2009, 20:48

lsmod στο 9.04

Κώδικας: Επιλογή όλων
boss@Ubuntu9:~$ lsmod
Module Size Used by
xt_TCPMSS 12032 1
xt_limit 10116 8
xt_tcpudp 11008 11
nf_nat_irc 10240 0
nf_nat_ftp 10752 0
ipt_LOG 13700 8
ipt_MASQUERADE 10752 1
xt_DSCP 11264 0
ipt_REJECT 11136 1
nf_conntrack_irc 13220 1 nf_nat_irc
nf_conntrack_ftp 15652 1 nf_nat_ftp
xt_state 10112 8
binfmt_misc 16776 1
ppdev 15620 0
bridge 56212 0
stp 10500 1 bridge
bnep 20224 2
input_polldev 11912 0
lp 17156 0
parport 42220 2 ppdev,lp
iptable_nat 13700 1
nf_nat 25876 4 nf_nat_irc,nf_nat_ftp,ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 21388 11 iptable_nat,nf_nat
nf_conntrack 72008 9 nf_nat_irc,nf_nat_ftp,ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 9984 1 nf_conntrack_ipv4
iptable_mangle 10880 0
iptable_filter 10752 1
ip_tables 19600 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 23044 10 xt_TCPMSS,xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,xt_DSCP,ipt_REJECT,xt_state,iptable_nat,ip_tables
snd_seq_dummy 10756 0
snd_seq_oss 37760 0
snd_seq_midi 14336 0
snd_rawmidi 29696 1 snd_seq_midi
snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
snd_hda_intel 436148 3
snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
psmouse 61972 0
snd_pcm 83076 2 snd_hda_intel,snd_pcm_oss
pcspkr 10496 0
iTCO_wdt 19108 0
serio_raw 13444 0
iTCO_vendor_support 11652 1 iTCO_wdt
snd_timer 29704 2 snd_seq,snd_pcm
snd 62756 15 snd_seq_oss,snd_rawmidi,snd_hda_intel,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_seq_device,snd_pcm,snd_timer
soundcore 15200 1 snd
snd_page_alloc 16904 2 snd_hda_intel,snd_pcm
fglrx 2081668 34
video 25872 0
output 11008 1 video
intel_agp 34108 0
agpgart 42696 2 fglrx,intel_agp
usbhid 42336 0
ohci1394 38576 0
ieee1394 94660 1 ohci1394
r8169 40836 0
mii 13312 1 r8169
e1000e 121136 0
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
boss@Ubuntu9:~$
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 10.04
Προδιαγραφές: INTEL Core2Duo E8400 |Kingston SSD 64G & 40G | 4G | ATI Radeon HD 2400 Pro | NEC LCD19wv
taso$_G
babeTUX
babeTUX
 
Δημοσιεύσεις: 33
Εγγραφή: 08 Νοέμ 2009, 14:53
Εκτύπωση

Re: Το 9.10 δεν επικοινωνεί με το modem

Δημοσίευσηαπό taso$_G » 30 Νοέμ 2009, 20:56

dmesg sto 9.10

Κώδικας: Επιλογή όλων
[ 0.256239] pci 0000:00:1c.3: PREFETCH window: 0xd0400000-0xd04fffff
[ 0.256242] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.256245] pci 0000:00:1e.0: IO window: 0x9000-0x9fff
[ 0.256249] pci 0000:00:1e.0: MEM window: 0xd0100000-0xd01fffff
[ 0.256252] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.256258] alloc irq_desc for 16 on node -1
[ 0.256260] alloc kstat_irqs on node -1
[ 0.256263] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.256265] pci 0000:00:01.0: setting latency timer to 64
[ 0.256270] alloc irq_desc for 17 on node -1
[ 0.256271] alloc kstat_irqs on node -1
[ 0.256274] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.256277] pci 0000:00:1c.0: setting latency timer to 64
[ 0.256282] alloc irq_desc for 19 on node -1
[ 0.256283] alloc kstat_irqs on node -1
[ 0.256286] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.256289] pci 0000:00:1c.3: setting latency timer to 64
[ 0.256294] pci 0000:00:1e.0: setting latency timer to 64
[ 0.256297] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.256298] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.256300] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.256301] pci_bus 0000:01: resource 1 mem: [0xc0000000-0xd00fffff]
[ 0.256303] pci_bus 0000:03: resource 0 io: [0xa000-0xafff]
[ 0.256305] pci_bus 0000:03: resource 1 mem: [0xd0200000-0xd02fffff]
[ 0.256307] pci_bus 0000:03: resource 2 pref mem [0xd0400000-0xd04fffff]
[ 0.256308] pci_bus 0000:04: resource 0 io: [0x9000-0x9fff]
[ 0.256310] pci_bus 0000:04: resource 1 mem: [0xd0100000-0xd01fffff]
[ 0.256312] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.256313] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.256332] NET: Registered protocol family 2
[ 0.256390] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.256573] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.256813] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.256937] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.256938] TCP reno registered
[ 0.256980] NET: Registered protocol family 1
[ 0.257015] Trying to unpack rootfs image as initramfs...
[ 0.381630] Freeing initrd memory: 7471k freed
[ 0.383897] cpufreq-nforce2: No nForce2 chipset.
[ 0.383918] Scanning for low memory corruption every 60 seconds
[ 0.384019] audit: initializing netlink socket (disabled)
[ 0.384035] type=2000 audit(1259603541.383:1): initialized
[ 0.389780] highmem bounce pool size: 64 pages
[ 0.389783] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.390756] VFS: Disk quotas dquot_6.5.2
[ 0.390795] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.391160] fuse init (API version 7.12)
[ 0.391215] msgmni has been set to 1679
[ 0.391361] alg: No test for stdrng (krng)
[ 0.391370] io scheduler noop registered
[ 0.391372] io scheduler anticipatory registered
[ 0.391373] io scheduler deadline registered
[ 0.391399] io scheduler cfq registered (default)
[ 0.704912] Switched to high resolution mode on CPU 1
[ 0.707235] Switched to high resolution mode on CPU 0
[ 1.988007] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.588006] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.588122] pci 0000:01:00.0: Boot video device
[ 3.588223] alloc irq_desc for 24 on node -1
[ 3.588224] alloc kstat_irqs on node -1
[ 3.588231] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 3.588236] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 3.588306] alloc irq_desc for 25 on node -1
[ 3.588308] alloc kstat_irqs on node -1
[ 3.588313] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 3.588319] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 3.588404] alloc irq_desc for 26 on node -1
[ 3.588405] alloc kstat_irqs on node -1
[ 3.588411] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 3.588417] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 3.588479] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.588494] Firmware did not grant requested _OSC control
[ 3.588506] Firmware did not grant requested _OSC control
[ 3.588523] Firmware did not grant requested _OSC control
[ 3.588531] Firmware did not grant requested _OSC control
[ 3.588540] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.588627] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.588630] ACPI: Power Button [PWRF]
[ 3.588672] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 3.588677] ACPI: Power Button [PWRB]
[ 3.588991] ACPI: SSDT bfd61c18 002CC (v01 AMI IST 00000001 MSFT 03000001)
[ 3.589283] Marking TSC unstable due to TSC halts in idle
[ 3.589296] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.589312] processor LNXCPU:00: registered as cooling_device0
[ 3.589477] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 3.589490] processor LNXCPU:01: registered as cooling_device1
[ 3.590545] isapnp: Scanning for PnP cards...
[ 3.943741] isapnp: No Plug & Play device found
[ 3.944436] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.944537] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.944761] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.944868] alloc irq_desc for 21 on node -1
[ 3.944870] alloc kstat_irqs on node -1
[ 3.944874] serial 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.944943] 0000:04:00.0: ttyS1 at I/O 0x9050 (irq = 21) is a 16550A
[ 3.945022] 0000:04:00.0: ttyS2 at I/O 0x9040 (irq = 21) is a 16550A
[ 3.945643] brd: module loaded
[ 3.945940] loop: module loaded
[ 3.945982] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 3.946052] ata_piix 0000:00:1f.2: version 2.13
[ 3.946060] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.946064] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.946098] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.946147] scsi0 : ata_piix
[ 3.946201] scsi1 : ata_piix
[ 3.946228] ata1: SATA max UDMA/133 cmd 0xc1b0 ctl 0xc1a0 bmdma 0xc170 irq 19
[ 3.946233] ata2: SATA max UDMA/133 cmd 0xc190 ctl 0xc180 bmdma 0xc178 irq 19
[ 3.946244] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.946250] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.946277] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 3.946305] scsi2 : ata_piix
[ 3.946353] scsi3 : ata_piix
[ 3.946377] ata3: SATA max UDMA/133 cmd 0xc150 ctl 0xc140 bmdma 0xc110 irq 19
[ 3.946380] ata4: SATA max UDMA/133 cmd 0xc130 ctl 0xc120 bmdma 0xc118 irq 19
[ 3.946956] Fixed MDIO Bus: probed
[ 3.946980] PPP generic driver version 2.4.2
[ 3.947037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.947051] alloc irq_desc for 18 on node -1
[ 3.947052] alloc kstat_irqs on node -1
[ 3.947055] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.947062] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.947065] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.947093] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.950986] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.950991] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.951000] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0325400
[ 3.964010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.964081] usb usb1: configuration #1 chosen from 1 choice
[ 3.964115] hub 1-0:1.0: USB hub found
[ 3.964122] hub 1-0:1.0: 6 ports detected
[ 3.964180] alloc irq_desc for 23 on node -1
[ 3.964181] alloc kstat_irqs on node -1
[ 3.964184] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.964190] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.964192] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.964210] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.968108] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.968113] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.968122] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0325000
[ 3.984013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.984070] usb usb2: configuration #1 chosen from 1 choice
[ 3.984095] hub 2-0:1.0: USB hub found
[ 3.984101] hub 2-0:1.0: 6 ports detected
[ 3.984155] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.984174] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.984188] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.984192] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.984194] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.984213] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.984238] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c0c0
[ 3.984289] usb usb3: configuration #1 chosen from 1 choice
[ 3.984305] hub 3-0:1.0: USB hub found
[ 3.984309] hub 3-0:1.0: 2 ports detected
[ 3.984340] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.984344] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.984347] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.984365] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.984389] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c0a0
[ 3.984442] usb usb4: configuration #1 chosen from 1 choice
[ 3.984458] hub 4-0:1.0: USB hub found
[ 3.984462] hub 4-0:1.0: 2 ports detected
[ 3.984496] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.984501] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.984503] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.984523] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 3.984543] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000c080
[ 3.984591] usb usb5: configuration #1 chosen from 1 choice
[ 3.984607] hub 5-0:1.0: USB hub found
[ 3.984611] hub 5-0:1.0: 2 ports detected
[ 3.984642] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.984647] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.984650] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.984669] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 3.984688] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c060
[ 3.984736] usb usb6: configuration #1 chosen from 1 choice
[ 3.984752] hub 6-0:1.0: USB hub found
[ 3.984757] hub 6-0:1.0: 2 ports detected
[ 3.984788] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.984792] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.984795] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.984813] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 3.984832] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c040
[ 3.984880] usb usb7: configuration #1 chosen from 1 choice
[ 3.984897] hub 7-0:1.0: USB hub found
[ 3.984901] hub 7-0:1.0: 2 ports detected
[ 3.984936] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.984941] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.984943] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.984963] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.984983] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c020
[ 3.985031] usb usb8: configuration #1 chosen from 1 choice
[ 3.985047] hub 8-0:1.0: USB hub found
[ 3.985051] hub 8-0:1.0: 2 ports detected
[ 3.985115] PNP: No PS/2 controller found. Probing ports directly.
[ 3.989246] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.989250] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.989285] mice: PS/2 mouse device common for all mice
[ 3.989349] rtc_cmos 00:05: RTC can wake from S4
[ 3.989368] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.989389] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 3.989451] device-mapper: uevent: version 1.0.3
[ 3.989506] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 3.989560] device-mapper: multipath: version 1.1.0 loaded
[ 3.989562] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.989640] EISA: Probing bus 0 at eisa.0
[ 3.989664] EISA: Detected 0 cards.
[ 3.989775] cpuidle: using governor ladder
[ 3.989854] cpuidle: using governor menu
[ 3.990167] TCP cubic registered
[ 3.990268] NET: Registered protocol family 10
[ 3.990570] lo: Disabled Privacy Extensions
[ 3.990786] NET: Registered protocol family 17
[ 3.990797] Bluetooth: L2CAP ver 2.13
[ 3.990798] Bluetooth: L2CAP socket layer initialized
[ 3.990800] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.990801] Bluetooth: SCO socket layer initialized
[ 3.990823] Bluetooth: RFCOMM TTY layer initialized
[ 3.990825] Bluetooth: RFCOMM socket layer initialized
[ 3.990826] Bluetooth: RFCOMM ver 1.11
[ 3.991035] Using IPI No-Shortcut mode
[ 3.991071] PM: Resume from disk failed.
[ 3.991078] registered taskstats version 1
[ 3.991164] Magic number: 1:429:897
[ 3.991212] rtc_cmos 00:05: setting system clock to 2009-11-30 17:52:26 UTC (1259603546)
[ 3.991214] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.991215] EDD information not available.
[ 4.274819] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.285615] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.285624] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 4.416840] usb 1-2: configuration #2 chosen from 1 choice
[ 4.528034] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 4.661587] usb 1-4: configuration #1 chosen from 1 choice
[ 4.752081] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.752094] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.752265] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.752277] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.768459] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100
[ 4.768626] ata2.00: ATA-7: KINGSTON SSDNow 40GB, 2CV102HA, max UDMA/133
[ 4.768628] ata2.00: 78125000 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.794706] ata2.01: ATA-8: ST3160318AS, CC34, max UDMA/133
[ 4.794708] ata2.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.795925] ata1.01: ATA-8: ST3160813AS, CC2H, max UDMA/133
[ 4.795927] ata1.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.800371] ata2.00: configured for UDMA/133
[ 4.808315] ata1.00: configured for UDMA/100
[ 4.850324] ata2.01: configured for UDMA/133
[ 4.859660] ata1.01: configured for UDMA/133
[ 4.860688] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB00 PQ: 0 ANSI: 5
[ 4.864313] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.864315] Uniform CD-ROM driver Revision: 3.20
[ 4.864361] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.864387] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.864435] scsi 0:0:1:0: Direct-Access ATA ST3160813AS CC2H PQ: 0 ANSI: 5
[ 4.864510] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 4.864533] sd 0:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 4.864562] sd 0:0:1:0: [sda] Write Protect is off
[ 4.864564] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.864579] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.864656] sda:
[ 4.864764] scsi 1:0:0:0: Direct-Access ATA KINGSTON SSDNow 2CV1 PQ: 0 ANSI: 5
[ 4.864826] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 4.864873] scsi 1:0:1:0: Direct-Access ATA ST3160318AS CC34 PQ: 0 ANSI: 5
[ 4.864934] sd 1:0:1:0: Attached scsi generic sg3 type 0
[ 4.864954] sd 1:0:0:0: [sdb] 78125000 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 4.864982] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.864984] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.864999] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.865072] sdb:
[ 4.865317] sd 1:0:1:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 4.865344] sd 1:0:1:0: [sdc] Write Protect is off
[ 4.865346] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.865361] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.865431] sdc: sdb1 sdb2 < sdc1 sdc2 sdc3 < sdb5 sda1 sda2 sda3 sda4
[ 4.888186] sdc5 sdb6 >
[ 4.894721] sdc6 sdc7 sdc8
[ 4.913888] sd 0:0:1:0: [sda] Attached SCSI disk
[ 4.920709] sdc9 >
[ 4.920726] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.920936] sd 1:0:1:0: [sdc] Attached SCSI disk
[ 4.920961] Freeing unused kernel memory: 540k freed
[ 4.921176] Write protecting the kernel text: 4568k
[ 4.921209] Write protecting the kernel read-only data: 1836k
[ 4.991001] Linux agpgart interface v0.103
[ 4.998787] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.998804] r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.998840] r8169 0000:03:00.0: setting latency timer to 64
[ 4.998894] alloc irq_desc for 27 on node -1
[ 4.998895] alloc kstat_irqs on node -1
[ 4.998908] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[ 4.999333] eth0: RTL8168b/8111b at 0xf80ca000, 00:1d:0f:bf:20:f0, XID 38000000 IRQ 27
[ 5.003341] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 5.003343] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 5.003368] alloc irq_desc for 20 on node -1
[ 5.003369] alloc kstat_irqs on node -1
[ 5.003373] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.003377] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
[ 5.003380] e1000e 0000:00:19.0: setting latency timer to 64
[ 5.003435] alloc irq_desc for 28 on node -1
[ 5.003437] alloc kstat_irqs on node -1
[ 5.003443] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 5.045097] [drm] Initialized drm 1.1.0 20060810
[ 5.055160] [drm] radeon default to kernel modesetting DISABLED.
[ 5.055759] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.055763] pci 0000:01:00.0: setting latency timer to 64
[ 5.055854] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 5.077876] alloc irq_desc for 22 on node -1
[ 5.077878] alloc kstat_irqs on node -1
[ 5.077883] ohci1394 0000:04:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.112094] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 5.120985] 0000:00:19.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:8f:5b:e9
[ 5.120987] 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection
[ 5.121012] 0000:00:19.0: eth1: MAC: 7, PHY: 8, PBA No: ffffff-0ff
[ 5.134608] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[22] MMIO=[d0100000-d01007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 5.293637] usb 5-1: configuration #1 chosen from 1 choice
[ 5.300078] usbcore: registered new interface driver hiddev
[ 5.313727] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3
[ 5.313764] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.2-1/input0
[ 5.346867] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input4
[ 5.346911] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-1/input1
[ 5.346920] usbcore: registered new interface driver usbhid
[ 5.346922] usbhid: v2.6:USB HID core driver
[ 5.536534] usb 5-2: new low speed USB device using uhci_hcd and address 3
[ 5.709610] usb 5-2: configuration #1 chosen from 1 choice
[ 5.730755] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input5
[ 5.730800] generic-usb 0003:046D:C50E.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1a.2-2/input0
[ 5.967124] PM: Starting manual resume from disk
[ 5.967126] PM: Resume from partition 8:39
[ 5.967127] PM: Checking hibernation image.
[ 5.967330] PM: Resume from disk failed.
[ 5.992489] EXT4-fs (sdc8): barriers enabled
[ 6.004551] kjournald2 starting: pid 434, dev sdc8:8, commit interval 5 seconds
[ 6.004563] EXT4-fs (sdc8): delayed allocation enabled
[ 6.004565] EXT4-fs: file extents enabled
[ 6.004916] EXT4-fs: mballoc enabled
[ 6.004926] EXT4-fs (sdc8): mounted filesystem with ordered data mode
[ 6.412282] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00902700023c3873]
[ 6.804555] type=1505 audit(1259603549.312:2): operation="profile_load" pid=457 name=/usr/share/gdm/guest-session/Xsession
[ 6.958119] type=1505 audit(1259603549.465:3): operation="profile_load" pid=458 name=/sbin/dhclient3
[ 6.958147] type=1505 audit(1259603549.465:4): operation="profile_load" pid=458 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 6.958172] type=1505 audit(1259603549.465:5): operation="profile_load" pid=458 name=/usr/lib/connman/scripts/dhclient-script
[ 13.741579] type=1505 audit(1259603556.249:6): operation="profile_load" pid=459 name=/usr/bin/evince
[ 13.741923] type=1505 audit(1259603556.249:7): operation="profile_load" pid=459 name=/usr/bin/evince-previewer
[ 13.742236] type=1505 audit(1259603556.249:8): operation="profile_load" pid=459 name=/usr/bin/evince-thumbnailer
[ 13.944771] type=1505 audit(1259603556.453:9): operation="profile_load" pid=461 name=/usr/lib/cups/backend/cups-pdf
[ 13.944829] type=1505 audit(1259603556.453:10): operation="profile_load" pid=461 name=/usr/sbin/cupsd
[ 13.995492] type=1505 audit(1259603556.500:11): operation="profile_load" pid=462 name=/usr/sbin/tcpdump
[ 14.915767] Adding 5245180k swap on /dev/sdc7. Priority:-1 extents:1 across:5245180k
[ 15.306568] EXT4-fs (sdc8): internal journal on sdc8:8
[ 15.659516] EXT4-fs (sdc9): barriers enabled
[ 15.660228] kjournald2 starting: pid 515, dev sdc9:8, commit interval 5 seconds
[ 15.673041] EXT4-fs (sdc9): internal journal on sdc9:8
[ 15.673044] EXT4-fs (sdc9): delayed allocation enabled
[ 15.673046] EXT4-fs: file extents enabled
[ 15.674225] EXT4-fs: mballoc enabled
[ 15.674236] EXT4-fs (sdc9): mounted filesystem with ordered data mode
[ 16.278064] udev: starting version 147
[ 17.712682] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.227554] heci: module is from the staging directory, the quality is unknown, you have been warned.
[ 18.228357] heci: Intel(R) Management Engine Interface - version 5.0.0.31
[ 18.228358] heci: Copyright (c) 2003 - 2008 Intel Corporation.
[ 18.228386] heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.228390] heci 0000:00:03.0: setting latency timer to 64
[ 18.229183] heci: link layer has been established.
[ 18.337254] lp: driver loaded but no devices found
[ 18.340324] heci driver initialization successful.
[ 18.898937] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 18.898955] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 19.359342] type=1505 audit(1259596361.864:12): operation="profile_replace" pid=894 name=/usr/share/gdm/guest-session/Xsession
[ 19.458117] type=1505 audit(1259596361.964:13): operation="profile_replace" pid=897 name=/sbin/dhclient3
[ 19.458172] type=1505 audit(1259596361.964:14): operation="profile_replace" pid=897 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 19.458214] type=1505 audit(1259596361.964:15): operation="profile_replace" pid=897 name=/usr/lib/connman/scripts/dhclient-script
[ 19.932000] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000
[ 20.936006] hda-intel: Codec #3 probe error; disabling it...
[ 21.049585] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 21.066055] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 21.066095] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 21.066131] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 21.066168] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 21.066208] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 21.066245] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 21.066284] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 21.066794] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 21.066817] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 23.161041] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 23.220545] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 23.220734] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 23.221544] r8169: eth0: link up
[ 23.221549] r8169: eth0: link up
[ 24.796763] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 24.796765] 0000:00:19.0: eth1: 10/100 speed: disabling TSO
[ 24.796918] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 25.281956] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 25.281998] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 25.544080] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 25.544118] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 25.544148] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 25.565876] [drm] Setting GART location based on new memory map
[ 25.581387] [drm] Loading RV610 CP Microcode
[ 25.581518] [drm] Loading RV610 PFP Microcode
[ 25.596425] [drm] Resetting GPU
[ 25.596480] [drm] writeback test succeeded in 1 usecs
[ 26.359978] type=1505 audit(1259596368.864:16): operation="profile_replace" pid=899 name=/usr/bin/evince
[ 26.360663] type=1505 audit(1259596368.868:17): operation="profile_replace" pid=899 name=/usr/bin/evince-previewer
[ 26.361167] type=1505 audit(1259596368.868:18): operation="profile_replace" pid=899 name=/usr/bin/evince-thumbnailer
[ 26.542916] type=1505 audit(1259596369.049:19): operation="profile_replace" pid=1301 name=/usr/lib/cups/backend/cups-pdf
[ 26.543003] type=1505 audit(1259596369.049:20): operation="profile_replace" pid=1301 name=/usr/sbin/cupsd
[ 26.596269] type=1505 audit(1259596369.101:21): operation="profile_replace" pid=1304 name=/usr/sbin/tcpdump
[ 29.949103] ppdev: user-space parallel port driver
[ 31.338009] CPU0 attaching NULL sched-domain.
[ 31.338012] CPU1 attaching NULL sched-domain.
[ 31.352105] CPU0 attaching sched-domain:
[ 31.352108] domain 0: span 0-1 level MC
[ 31.352111] groups: 0 1
[ 31.352115] domain 1: span 0-1 level CPU
[ 31.352117] groups: 0-1 (__cpu_power = 2048)
[ 31.352122] CPU1 attaching sched-domain:
[ 31.352124] domain 0: span 0-1 level MC
[ 31.352127] groups: 1 0
[ 31.352130] domain 1: span 0-1 level CPU
[ 31.352132] groups: 0-1 (__cpu_power = 2048)
[ 31.480169] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 33.768517] eth0: no IPv6 routers present
[ 33.915613] CPU0 attaching NULL sched-domain.
[ 33.915616] CPU1 attaching NULL sched-domain.
[ 33.928076] CPU0 attaching sched-domain:
[ 33.928078] domain 0: span 0-1 level MC
[ 33.928080] groups: 0 1
[ 33.928084] CPU1 attaching sched-domain:
[ 33.928085] domain 0: span 0-1 level MC
[ 33.928087] groups: 1 0
[ 35.248010] eth1: no IPv6 routers present
[ 75.704020] Clocksource tsc unstable (delta = -69933087 ns)
boss@Ubuntu9:~$
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 10.04
Προδιαγραφές: INTEL Core2Duo E8400 |Kingston SSD 64G & 40G | 4G | ATI Radeon HD 2400 Pro | NEC LCD19wv
taso$_G
babeTUX
babeTUX
 
Δημοσιεύσεις: 33
Εγγραφή: 08 Νοέμ 2009, 14:53
Εκτύπωση

Re: Το 9.10 δεν επικοινωνεί με το modem

Δημοσίευσηαπό taso$_G » 30 Νοέμ 2009, 20:58

lsmod sto 9.10

Κώδικας: Επιλογή όλων
boss@Ubuntu9:~$ lsmod
Module Size Used by
binfmt_misc 8356 1
ppdev 6688 0
snd_hda_codec_atihdmi 3356 1
snd_hda_codec_idt 59844 1
snd_hda_intel 26920 2
snd_hda_codec 75708 3 snd_hda_codec_atihdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 7200 1 snd_hda_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
snd_pcm 75296 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 2656 0
snd_seq_oss 28576 0
snd_seq_midi 6432 0
snd_rawmidi 22208 1 snd_seq_midi
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 22276 2 snd_pcm,snd_seq
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 59204 16 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
heci 57356 0
soundcore 7264 1 snd
iptable_filter 3100 0
snd_page_alloc 9156 2 snd_hda_intel,snd_pcm
psmouse 56500 0
serio_raw 5280 0
ip_tables 11692 1 iptable_filter
x_tables 16544 1 ip_tables
lp 8964 0
parport 35340 2 ppdev,lp
usbhid 38208 0
video 19380 0
ohci1394 29900 0
output 2780 1 video
ieee1394 86596 1 ohci1394
radeon 636000 1
ttm 36212 1 radeon
drm 159584 3 radeon,ttm
i2c_algo_bit 5760 1 radeon
e1000e 122124 0
r8169 32064 0
mii 5212 1 r8169
intel_agp 27484 0
agpgart 34988 3 ttm,drm,intel_agp
boss@Ubuntu9:~$
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 10.04
Προδιαγραφές: INTEL Core2Duo E8400 |Kingston SSD 64G & 40G | 4G | ATI Radeon HD 2400 Pro | NEC LCD19wv
taso$_G
babeTUX
babeTUX
 
Δημοσιεύσεις: 33
Εγγραφή: 08 Νοέμ 2009, 14:53
Εκτύπωση

Re: Το 9.10 δεν επικοινωνεί με το modem

Δημοσίευσηαπό linuxman » 01 Δεκ 2009, 02:37

taso$_G έγραψε:dmesg στο 9.04 :

Κώδικας: Επιλογή όλων

[ 37.528820] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 37.528837] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 37.528848] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 37.528859] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 37.528870] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 38.248038] eth0: no IPv6 routers present
[ 41.612540] eth1: no IPv6 routers present
[ 90.432042] Clocksource tsc unstable (delta = -75416527 ns)
[ 108.599523] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 233.691878] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 343.794742] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[ 345.797068] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[ 346.798171] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[ 347.799320] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[ 359.811657] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=218 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=198
[ 361.814050] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=218 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=198
[ 363.816290] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=218 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=198
[ 365.818520] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=218 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=198
[ 367.820111] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=218 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=198
[ 367.820132] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 369.822500] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 370.823633] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 371.824632] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 372.825821] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 374.828048] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 375.828602] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 376.829747] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[ 377.830937] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=206 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=186
[ 387.841125] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 387.841150] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=236 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=216
[ 628.068685] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 628.068709] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=236 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=216
[ 928.357142] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 928.357168] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=236 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=216
[ 1288.601598] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 1288.601623] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=236 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=216
[ 1708.993576] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 1708.993602] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=236 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=216
[ 2189.450368] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=259 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=239
[ 2189.450394] Inbound IN=eth1 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=236 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=216
boss@Ubuntu9:~$

Το αποτέλεσμα δείχνει σαν να έχεις Firewall ενεργοποιημένο , έχεις ?
Οδηγίες προς Νεοεισερχόμενους
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Ικανοποιητικό ┃ Αγγλικών: Ικανοποιητικό
2 Linux Mint 17.1 Rebecca 3.13.0-37-generic 64bit (el_GR.UTF-8, X-Cinnamon cinnamon)
3 Intel Core i5-2310M CPU @ 2.10GHz ‖ RAM 3866 MiB ‖ Dell Inc. 0D7C51 - Dell Inc. Dell System Vostro 3750
4 Intel 2nd Generation Core Processor Family Integrated Graphics [8086:0116] {i915}
5 wlan0: Intel Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) ⋮ eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
http://www.greeklug.gr
Άβαταρ μέλους
linuxman
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10378
Εγγραφή: 10 Μάιος 2008, 20:41
Τοποθεσία: Thessaloniki / Macedonia / Greece
Εκτύπωση

Re: Το 9.10 δεν επικοινωνεί με το modem

Δημοσίευσηαπό taso$_G » 01 Δεκ 2009, 19:46

Λίγο απίθανο να συμβαίνει, αφού το σύστημα (το 9.10) είναι ουσιαστικά όπως προκύπτει από την εγκατάσταση, δεν έχω κάνει καμία αλλαγή εκτός της εγκατάστασης του efax, εκτός κι αν το λειτουργικό από μόνο του ενεργοποιεί firewall, που δεν νομίζω, πάντως για παν ενδεχόμενο έκανα εγκατάσταση στο firestarter και έλεγξα τι γίνεται με το firewall on και off, καμία διαφορά, βέβαια μου κανε εντύπωση (μετα απο αλλεπάλληλες δοκιμες) ότι το efax (άσχετα με το αν το firewall είναι on η off) δεν βγάζει σε κάθε περίπτωση το ίδιο μήνυμα λάθους, αλλά σε κάθε περίπτωση η κατάληξη είναι :
Κώδικας: Επιλογή όλων
efax-0.9a: 13:10:27 finished - invalid modem respons
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 10.04
Προδιαγραφές: INTEL Core2Duo E8400 |Kingston SSD 64G & 40G | 4G | ATI Radeon HD 2400 Pro | NEC LCD19wv
taso$_G
babeTUX
babeTUX
 
Δημοσιεύσεις: 33
Εγγραφή: 08 Νοέμ 2009, 14:53
Εκτύπωση


Επιστροφή στο Κάρτες Δικτύου (Ethernet, WiFi, Bluetooth) / Internet