Σύνδεση με Sagem Fast 840 του Connex

[logari81]

Τωρα πρόσεξα όμως ότι μετα απο αυτο θα πρεπει να κανεις και κατι ακομα. Αν εχεις καποια εναλλακτικη συνδεση, π.χ. με ethernet ή με ασυρματο εκτέλεσε το παρακάτω για να προσθεσεις το firmware που λείπει:
viewtopic.php?f=39&t=9494&start=10#p97548
Διαφορετικά δες τα υπόλοιπα μηνυματα του Tsili32 για να δεις πως το εκανε αυτος χωρίς σύνδεση ιντερνετ.

Βασικα περιμενε λιγο, μην το κανεις αυτο, θα σου ετοιμασω ενα πακετο με το ubudsl να δοκιμασεις.

[jo451]

να το σβησεις και το CMV4i να το μετονομασει σε CMV4i.bin.v2

αφου το κανεις αυτο ποσταρε εδω το αποτελεσμα της εντολής

Κώδικας: Επιλογή όλων
ls -al /lib/firmware/ueagle-atm/


για να τσεκαρουμε ότι το εκανες σωστα.

το έκανα αυτο και η εντολή δινει τα ακόλουθα

Κώδικας: Επιλογή όλων

john@john:~$ ls -al /lib/firmware/ueagle-atm/
total 3128
drwxr-xr-x 2 root root 4096 2010-02-08 14:58 .
drwxr-xr-x 6 root root 4096 2010-02-06 14:05 ..
-rw-r--r-- 1 john users 22395 2008-08-08 20:36 930-fpga.bin
-rw-r--r-- 1 john users 7759 2008-08-08 20:36 adi930.fw
-rwxrwxrwx 1 root root 153 2010-02-08 12:38 CMV4i.bin.v2
-rw-r--r-- 1 john users 137 2008-08-08 20:36 CMV4p.bin.v2
-rw-r--r-- 1 john users 71 2008-08-08 20:36 CMV9i.bin
-rw-r--r-- 1 john users 61 2008-08-08 20:36 CMV9p.bin
-rw-r--r-- 1 john users 161 2008-08-08 20:36 CMVei.bin
-rw-r--r-- 1 john users 161 2008-08-08 20:36 CMVeiWO.bin
-rw-r--r-- 1 john users 297 2008-08-08 19:36 CMVep_ANSI.bin
-rw-r--r-- 1 john users 161 2008-08-08 20:36 CMVep.bin
-rw-r--r-- 1 john users 151 2008-08-08 20:36 CMVepES03.bin
-rw-r--r-- 1 john users 151 2008-08-08 20:36 CMVepES.bin
-rw-r--r-- 1 john users 151 2008-08-08 20:36 CMVepFR04.bin
-rw-r--r-- 1 john users 181 2008-08-08 20:36 CMVepFR10.bin
-rw-r--r-- 1 john users 151 2008-08-08 20:36 CMVepFR.bin
-rw-r--r-- 1 john users 297 2008-08-08 19:38 CMVep_G.DMT.bin
-rw-r--r-- 1 john users 297 2008-08-08 19:39 CMVep_G.LITE.bin
-rw-r--r-- 1 john users 161 2008-08-08 20:36 CMVepIT.bin
-rw-r--r-- 1 john users 297 2008-08-08 19:37 CMVep_MULTI.bin
-rw-r--r-- 1 john users 151 2008-08-08 20:36 CMVepWO.bin
-rw-r--r-- 1 root root 456920 2010-02-08 14:53 DSP4i.bin
-rwxr-xr-x 1 john users 456436 2008-08-08 20:36 DSP4p.bin
-rw-r--r-- 1 john users 339717 2008-08-08 20:36 DSP9i.bin
-rw-r--r-- 1 john users 436947 2008-08-08 20:36 DSP9p.bin
-rw-r--r-- 1 john users 447099 2008-08-08 20:36 DSPei.bin
-rw-r--r-- 1 john users 427697 2008-08-08 20:36 DSPep.bin
-rwx------ 1 john users 456436 2008-08-08 20:36 e4_dsp_pots.bin
-rw-r--r-- 1 john users 10981 2008-08-08 20:36 eagleI.fw
-rw-r--r-- 1 john users 10875 2008-08-08 20:36 eagleII.fw
-rw-r--r-- 1 john users 10975 2008-08-08 20:36 eagleIII.fw
-rw-r--r-- 1 john users 10492 2008-08-08 20:36 eagleIV.fw
-rw-r--r-- 1 john users 2091 2008-08-08 20:36 Ikanos_license.txt
john@john:~$



έκανα επανεκκίνιση αλλά πάλι τα ίδια modem is not syhronized

[logari81]

δωσε και το

Κώδικας: Επιλογή όλων

dmesg

[jo451]

όλα εντάξει συνδεθηκε!!!! Σας ευχαριστώ πάρα πολύ για τη βοήθεια και τις οδηγίες.

Την πρώτη φορά που το άνοιξα συνδέθηκε κατευθείαν. Έκλεισα τον Η/Υ τον ξανάνοιξα
δεν συνδέθηκε. Πάτησα ξανά σύνδεση και μπήκε. Ευχαριστώ για μια ακόμη φορά.
Παραθέτω και αποτέλεσμα της εντολής dmesg

Κώδικας: Επιλογή όλων

[ 0.368617] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 0.368620] pci 0000:00:1c.0: PME# disabled

[ 0.368674] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[ 0.368678] pci 0000:00:1c.1: PME# disabled

[ 0.368722] pci 0000:00:1d.0: reg 20 io port: [0xc480-0xc49f]

[ 0.368766] pci 0000:00:1d.1: reg 20 io port: [0xc800-0xc81f]

[ 0.368810] pci 0000:00:1d.2: reg 20 io port: [0xc880-0xc89f]

[ 0.368853] pci 0000:00:1d.3: reg 20 io port: [0xcc00-0xcc1f]

[ 0.368902] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9ffbc00-0xf9ffbfff]

[ 0.368948] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[ 0.368952] pci 0000:00:1d.7: PME# disabled

[ 0.369061] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO

[ 0.369064] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO

[ 0.369067] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)

[ 0.369107] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]

[ 0.369113] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]

[ 0.369119] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]

[ 0.369124] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]

[ 0.369130] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]

[ 0.369168] pci 0000:00:1f.2: reg 10 io port: [0xc400-0xc407]

[ 0.369173] pci 0000:00:1f.2: reg 14 io port: [0xc080-0xc083]

[ 0.369178] pci 0000:00:1f.2: reg 18 io port: [0xc000-0xc007]

[ 0.369184] pci 0000:00:1f.2: reg 1c io port: [0xbc00-0xbc03]

[ 0.369189] pci 0000:00:1f.2: reg 20 io port: [0xb880-0xb88f]

[ 0.369210] pci 0000:00:1f.2: PME# supported from D3hot

[ 0.369214] pci 0000:00:1f.2: PME# disabled

[ 0.369255] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]

[ 0.369303] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]

[ 0.369311] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]

[ 0.369320] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]

[ 0.369325] pci 0000:01:00.0: reg 24 io port: [0xdc00-0xdc7f]

[ 0.369330] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9fffff]

[ 0.369387] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]

[ 0.369390] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfe9fffff]

[ 0.369394] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]

[ 0.369481] pci 0000:02:00.0: reg 10 64bit mmio: [0xfeac0000-0xfeafffff]

[ 0.369512] pci 0000:02:00.0: reg 30 32bit mmio: [0xfeaa0000-0xfeabffff]

[ 0.369547] pci 0000:02:00.0: PME# supported from D3hot D3cold

[ 0.369551] pci 0000:02:00.0: PME# disabled

[ 0.369599] pci 0000:00:1c.1: bridge 32bit mmio: [0xfea00000-0xfeafffff]

[ 0.369635] pci 0000:04:01.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]

[ 0.369642] pci 0000:04:01.0: reg 14 io port: [0xec00-0xec7f]

[ 0.369693] pci 0000:04:01.0: supports D2

[ 0.369694] pci 0000:04:01.0: PME# supported from D2 D3hot D3cold

[ 0.369698] pci 0000:04:01.0: PME# disabled

[ 0.369740] pci 0000:00:1e.0: transparent bridge

[ 0.369743] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]

[ 0.369747] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]

[ 0.369776] pci_bus 0000:00: on NUMA node 0

[ 0.369780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 0.369895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]

[ 0.369974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]

[ 0.370023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]

[ 0.376762] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[ 0.376854] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[ 0.376945] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)

[ 0.377035] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[ 0.377125] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.377215] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.377306] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.377397] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[ 0.377544] SCSI subsystem initialized

[ 0.377565] libata version 3.00 loaded.

[ 0.377565] usbcore: registered new interface driver usbfs

[ 0.377565] usbcore: registered new interface driver hub

[ 0.377565] usbcore: registered new device driver usb

[ 0.377565] ACPI: WMI: Mapper loaded

[ 0.377565] PCI: Using ACPI for IRQ routing

[ 0.388009] Bluetooth: Core ver 2.15

[ 0.388026] NET: Registered protocol family 31

[ 0.388026] Bluetooth: HCI device and connection manager initialized

[ 0.388026] Bluetooth: HCI socket layer initialized

[ 0.388026] NetLabel: Initializing

[ 0.388026] NetLabel: domain hash size = 128

[ 0.388027] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.388042] NetLabel: unlabeled traffic allowed by default

[ 0.388078] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[ 0.388084] hpet0: 3 comparators, 64-bit 14.318180 MHz counter

[ 0.408051] pnp: PnP ACPI init

[ 0.408062] ACPI: bus type pnp registered

[ 0.411620] pnp: PnP ACPI: found 19 devices

[ 0.411622] ACPI: ACPI bus type pnp unregistered

[ 0.411625] PnPBIOS: Disabled by ACPI PNP

[ 0.411635] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved

[ 0.411642] system 00:08: ioport range 0x290-0x297 has been reserved

[ 0.411648] system 00:09: ioport range 0x4d0-0x4d1 has been reserved

[ 0.411650] system 00:09: ioport range 0x800-0x87f has been reserved

[ 0.411652] system 00:09: ioport range 0x480-0x4bf has been reserved

[ 0.411655] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved

[ 0.411658] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved

[ 0.411663] system 00:0c: iomem range 0xffc00000-0xffefffff has been reserved

[ 0.411668] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved

[ 0.411670] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved

[ 0.411677] system 00:11: iomem range 0xf0000000-0xf3ffffff has been reserved

[ 0.411682] system 00:12: iomem range 0x0-0x9ffff could not be reserved

[ 0.411685] system 00:12: iomem range 0xc0000-0xcffff could not be reserved

[ 0.411687] system 00:12: iomem range 0xe0000-0xfffff could not be reserved

[ 0.411689] system 00:12: iomem range 0x100000-0xbfffffff could not be reserved

[ 0.446307] AppArmor: AppArmor Filesystem Enabled

[ 0.446341] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

[ 0.446344] pci 0000:00:01.0: IO window: 0xd000-0xdfff

[ 0.446348] pci 0000:00:01.0: MEM window: 0xfa000000-0xfe9fffff

[ 0.446351] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff

[ 0.446355] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03

[ 0.446356] pci 0000:00:1c.0: IO window: disabled

[ 0.446360] pci 0000:00:1c.0: MEM window: disabled

[ 0.446363] pci 0000:00:1c.0: PREFETCH window: disabled

[ 0.446367] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02

[ 0.446369] pci 0000:00:1c.1: IO window: disabled

[ 0.446373] pci 0000:00:1c.1: MEM window: 0xfea00000-0xfeafffff

[ 0.446376] pci 0000:00:1c.1: PREFETCH window: disabled

[ 0.446380] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04

[ 0.446382] pci 0000:00:1e.0: IO window: 0xe000-0xefff

[ 0.446387] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff

[ 0.446390] pci 0000:00:1e.0: PREFETCH window: disabled

[ 0.446398] alloc irq_desc for 16 on node -1

[ 0.446400] alloc kstat_irqs on node -1

[ 0.446404] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 0.446408] pci 0000:00:01.0: setting latency timer to 64

[ 0.446414] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 0.446418] pci 0000:00:1c.0: setting latency timer to 64

[ 0.446423] alloc irq_desc for 17 on node -1

[ 0.446425] alloc kstat_irqs on node -1

[ 0.446428] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[ 0.446431] pci 0000:00:1c.1: setting latency timer to 64

[ 0.446436] pci 0000:00:1e.0: setting latency timer to 64

[ 0.446440] pci_bus 0000:00: resource 0 io: [0x00-0xffff]

[ 0.446442] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]

[ 0.446444] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]

[ 0.446446] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe9fffff]

[ 0.446449] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]

[ 0.446451] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]

[ 0.446453] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]

[ 0.446455] pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff]

[ 0.446457] pci_bus 0000:04: resource 3 io: [0x00-0xffff]

[ 0.446459] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]

[ 0.446485] NET: Registered protocol family 2

[ 0.446561] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.446799] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.447153] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.447336] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.447338] TCP reno registered

[ 0.447393] NET: Registered protocol family 1

[ 0.447438] Trying to unpack rootfs image as initramfs...

[ 0.501600] Switched to high resolution mode on CPU 1

[ 0.502204] Switched to high resolution mode on CPU 3

[ 0.502303] Switched to high resolution mode on CPU 2

[ 0.504056] Switched to high resolution mode on CPU 0

[ 0.604454] Freeing initrd memory: 7469k freed

[ 0.607647] cpufreq-nforce2: No nForce2 chipset.

[ 0.607673] Scanning for low memory corruption every 60 seconds

[ 0.607767] audit: initializing netlink socket (disabled)

[ 0.607784] type=2000 audit(1265695810.604:1): initialized

[ 0.615051] highmem bounce pool size: 64 pages

[ 0.615055] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[ 0.616347] VFS: Disk quotas dquot_6.5.2

[ 0.616406] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 0.616891] fuse init (API version 7.12)

[ 0.616971] msgmni has been set to 1679

[ 0.617279] alg: No test for stdrng (krng)

[ 0.617288] io scheduler noop registered

[ 0.617290] io scheduler anticipatory registered

[ 0.617292] io scheduler deadline registered

[ 0.617333] io scheduler cfq registered (default)

[ 0.617431] pci 0000:01:00.0: Boot video device

[ 0.617522] alloc irq_desc for 24 on node -1

[ 0.617524] alloc kstat_irqs on node -1

[ 0.617532] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X

[ 0.617538] pcieport-driver 0000:00:01.0: setting latency timer to 64

[ 0.617631] alloc irq_desc for 25 on node -1

[ 0.617633] alloc kstat_irqs on node -1

[ 0.617639] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X

[ 0.617646] pcieport-driver 0000:00:1c.0: setting latency timer to 64

[ 0.617746] alloc irq_desc for 26 on node -1

[ 0.617748] alloc kstat_irqs on node -1

[ 0.617754] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X

[ 0.617761] pcieport-driver 0000:00:1c.1: setting latency timer to 64

[ 0.617836] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 0.617905] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[ 0.618020] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0

[ 0.618023] ACPI: Power Button [PWRF]

[ 0.618073] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1

[ 0.618075] ACPI: Power Button [PWRB]

[ 0.618554] ACPI: SSDT bffb00f0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)

[ 0.618786] processor LNXCPU:00: registered as cooling_device0

[ 0.619036] ACPI: SSDT bffb02d0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)

[ 0.619252] processor LNXCPU:01: registered as cooling_device1

[ 0.619499] ACPI: SSDT bffb0420 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)

[ 0.619728] processor LNXCPU:02: registered as cooling_device2

[ 0.619975] ACPI: SSDT bffb0570 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)

[ 0.620229] processor LNXCPU:03: registered as cooling_device3

[ 0.622224] isapnp: Scanning for PnP cards...

[ 0.975104] isapnp: No Plug & Play device found

[ 0.976041] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 0.976131] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 0.976565] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 0.977399] brd: module loaded

[ 0.977764] loop: module loaded

[ 0.977817] input: Macintosh mouse button emulation as /devices/virtual/input/input2

[ 0.977898] ata_piix 0000:00:1f.1: version 2.13

[ 0.977908] alloc irq_desc for 18 on node -1

[ 0.977909] alloc kstat_irqs on node -1

[ 0.977914] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 0.977949] ata_piix 0000:00:1f.1: setting latency timer to 64

[ 0.978040] scsi0 : ata_piix

[ 0.978123] scsi1 : ata_piix

[ 0.979215] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14

[ 0.979218] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15

[ 0.979244] alloc irq_desc for 19 on node -1

[ 0.979246] alloc kstat_irqs on node -1

[ 0.979250] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 0.979257] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]

[ 0.979297] ata_piix 0000:00:1f.2: setting latency timer to 64

[ 0.979343] scsi2 : ata_piix

[ 0.979398] scsi3 : ata_piix

[ 0.980751] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19

[ 0.980753] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19

[ 0.981455] Fixed MDIO Bus: probed

[ 0.981482] PPP generic driver version 2.4.2

[ 0.981548] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 0.981562] alloc irq_desc for 23 on node -1

[ 0.981564] alloc kstat_irqs on node -1

[ 0.981567] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23

[ 0.981581] ehci_hcd 0000:00:1d.7: setting latency timer to 64

[ 0.981584] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[ 0.981630] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1

[ 0.985541] ehci_hcd 0000:00:1d.7: debug port 1

[ 0.985546] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported

[ 0.985556] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00

[ 1.000043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00

[ 1.000131] usb usb1: configuration #1 chosen from 1 choice

[ 1.000174] hub 1-0:1.0: USB hub found

[ 1.000180] hub 1-0:1.0: 8 ports detected

[ 1.000233] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 1.000245] uhci_hcd: USB Universal Host Controller Interface driver

[ 1.000263] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23

[ 1.000268] uhci_hcd 0000:00:1d.0: setting latency timer to 64

[ 1.000271] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[ 1.000294] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2

[ 1.000315] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480

[ 1.000373] usb usb2: configuration #1 chosen from 1 choice

[ 1.000395] hub 2-0:1.0: USB hub found

[ 1.000400] hub 2-0:1.0: 2 ports detected

[ 1.000438] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 1.000443] uhci_hcd 0000:00:1d.1: setting latency timer to 64

[ 1.000446] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[ 1.000468] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3

[ 1.000488] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800

[ 1.000549] usb usb3: configuration #1 chosen from 1 choice

[ 1.000570] hub 3-0:1.0: USB hub found

[ 1.000575] hub 3-0:1.0: 2 ports detected

[ 1.000613] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 1.000618] uhci_hcd 0000:00:1d.2: setting latency timer to 64

[ 1.000620] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[ 1.000645] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4

[ 1.000670] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880

[ 1.000731] usb usb4: configuration #1 chosen from 1 choice

[ 1.000751] hub 4-0:1.0: USB hub found

[ 1.000756] hub 4-0:1.0: 2 ports detected

[ 1.000794] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16

[ 1.000799] uhci_hcd 0000:00:1d.3: setting latency timer to 64

[ 1.000801] uhci_hcd 0000:00:1d.3: UHCI Host Controller

[ 1.000829] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5

[ 1.000854] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00

[ 1.000912] usb usb5: configuration #1 chosen from 1 choice

[ 1.000935] hub 5-0:1.0: USB hub found

[ 1.000940] hub 5-0:1.0: 2 ports detected

[ 1.001030] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

[ 1.003305] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 1.003314] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 1.003364] mice: PS/2 mouse device common for all mice

[ 1.003437] rtc_cmos 00:03: RTC can wake from S4

[ 1.003463] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

[ 1.003484] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs

[ 1.003568] device-mapper: uevent: version 1.0.3

[ 1.003658] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com

[ 1.003806] device-mapper: multipath: version 1.1.0 loaded

[ 1.003809] device-mapper: multipath round-robin: version 1.0.0 loaded

[ 1.003940] EISA: Probing bus 0 at eisa.0

[ 1.003963] EISA: Detected 0 cards.

[ 1.004195] cpuidle: using governor ladder

[ 1.004197] cpuidle: using governor menu

[ 1.004608] TCP cubic registered

[ 1.004736] NET: Registered protocol family 10

[ 1.005110] lo: Disabled Privacy Extensions

[ 1.005378] NET: Registered protocol family 17

[ 1.005392] Bluetooth: L2CAP ver 2.13

[ 1.005394] Bluetooth: L2CAP socket layer initialized

[ 1.005396] Bluetooth: SCO (Voice Link) ver 0.6

[ 1.005397] Bluetooth: SCO socket layer initialized

[ 1.005439] Bluetooth: RFCOMM TTY layer initialized

[ 1.005443] Bluetooth: RFCOMM socket layer initialized

[ 1.005445] Bluetooth: RFCOMM ver 1.11

[ 1.006094] Using IPI No-Shortcut mode

[ 1.006141] PM: Resume from disk failed.

[ 1.006151] registered taskstats version 1

[ 1.006236] Magic number: 14:898:164

[ 1.006301] rtc_cmos 00:03: setting system clock to 2010-02-09 06:10:11 UTC (1265695811)

[ 1.006303] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 1.006305] EDD information not available.

[ 1.022008] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3

[ 1.143166] ata1.00: ATAPI: TSSTcorpDVD-ROM SH-D162D, SB00, max UDMA/33

[ 1.156205] ata1.00: configured for UDMA/33

[ 1.172548] scsi 0:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D162D SB00 PQ: 0 ANSI: 5

[ 1.188078] ata3.00: ATA-7: MAXTOR STM3250820AS, 3.AAE, max UDMA/133

[ 1.188082] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 1.188128] ata3.01: ATAPI: TSSTcorp CDDVDW SH-S203B, SB00, max UDMA/100

[ 1.189472] ata4.00: ATA-7: MAXTOR STM3250820AS, 3.AAE, max UDMA/133

[ 1.189476] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 1.189724] ata4.01: ATA-8: ST3500418AS, CC38, max UDMA/133

[ 1.189728] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 1.229440] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray

[ 1.229443] Uniform CD-ROM driver Revision: 3.20

[ 1.229535] sr 0:0:0:0: Attached scsi CD-ROM sr0

[ 1.229577] sr 0:0:0:0: Attached scsi generic sg0 type 5

[ 1.256152] ata4.00: configured for UDMA/133

[ 1.263076] ata3.00: configured for UDMA/133

[ 1.272409] ata4.01: configured for UDMA/133

[ 1.276220] ata3.01: configured for UDMA/100

[ 1.277496] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5

[ 1.277623] sd 2:0:0:0: Attached scsi generic sg1 type 0

[ 1.277633] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)

[ 1.278116] sd 2:0:0:0: [sda] Write Protect is off

[ 1.278118] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 1.278374] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.278382] scsi 2:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB00 PQ: 0 ANSI: 5

[ 1.282504] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

[ 1.282531] sda:

[ 1.282628] sr 2:0:1:0: Attached scsi CD-ROM sr1

[ 1.282666] sr 2:0:1:0: Attached scsi generic sg2 type 5

[ 1.282732] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5

[ 1.282821] sd 3:0:0:0: Attached scsi generic sg3 type 0

[ 1.282824] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)

[ 1.282867] sd 3:0:0:0: [sdb] Write Protect is off

[ 1.282870] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[ 1.282892] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.282895] scsi 3:0:1:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5

[ 1.282982] sd 3:0:1:0: Attached scsi generic sg4 type 0

[ 1.282993] sdb:

[ 1.283008] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)

[ 1.295792] sdb1

[ 1.295973] sd 3:0:0:0: [sdb] Attached SCSI disk

[ 1.295996] sd 3:0:1:0: [sdc] Write Protect is off

[ 1.295998] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00

[ 1.296017] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.296113] sdc: sda1

[ 1.302913] sd 2:0:0:0: [sda] Attached SCSI disk

[ 1.305672] sdc1 sdc2

[ 1.305853] sd 3:0:1:0: [sdc] Attached SCSI disk

[ 1.305881] Freeing unused kernel memory: 540k freed

[ 1.306162] Write protecting the kernel text: 4568k

[ 1.306210] Write protecting the kernel read-only data: 1836k

[ 1.397418] Linux agpgart interface v0.103

[ 1.420131] Floppy drive(s): fd0 is 1.44M

[ 1.430778] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[ 1.430788] atl1 0000:02:00.0: setting latency timer to 64

[ 1.430804] atl1 0000:02:00.0: version 2.1.3

[ 1.433125] ohci1394 0000:04:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.443273] FDC 0 is a post-1991 82077

[ 1.494780] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8]

[ 1.796128] usb 2-2: new full speed USB device using uhci_hcd and address 2

[ 1.946494] usb 2-2: configuration #1 chosen from 1 choice

[ 2.212019] usb 3-1: new full speed USB device using uhci_hcd and address 2

[ 2.388733] usb 3-1: configuration #1 chosen from 1 choice

[ 2.632232] EXT4-fs (sdc1): barriers enabled

[ 2.632539] usb 5-1: new full speed USB device using uhci_hcd and address 2

[ 2.639720] kjournald2 starting: pid 383, dev sdc1:8, commit interval 5 seconds

[ 2.639743] EXT4-fs (sdc1): delayed allocation enabled

[ 2.639747] EXT4-fs: file extents enabled

[ 2.642212] EXT4-fs: mballoc enabled

[ 2.642223] EXT4-fs (sdc1): mounted filesystem with ordered data mode

[ 2.773701] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106664555637e]

[ 2.875156] usb 5-1: configuration #1 chosen from 1 choice

[ 2.882293] usbcore: registered new interface driver hiddev

[ 2.882340] usbcore: registered new interface driver usbhid

[ 2.882342] usbhid: v2.6:USB HID core driver

[ 2.893156] input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input4

[ 2.893258] sony 0003:054C:0268.0001: input,hiddev96,hidraw0: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:1d.3-1/input0

[ 3.059779] type=1505 audit(1265695813.549:2): operation="profile_load" pid=411 name=/usr/share/gdm/guest-session/Xsession

[ 3.062496] type=1505 audit(1265695813.553:3): operation="profile_load" pid=412 name=/sbin/dhclient3

[ 3.063104] type=1505 audit(1265695813.553:4): operation="profile_load" pid=412 name=/usr/lib/NetworkManager/nm-dhcp-client.action

[ 3.063436] type=1505 audit(1265695813.553:5): operation="profile_load" pid=412 name=/usr/lib/connman/scripts/dhclient-script

[ 3.093967] type=1505 audit(1265695813.585:6): operation="profile_load" pid=413 name=/usr/bin/evince

[ 3.103337] type=1505 audit(1265695813.593:7): operation="profile_load" pid=413 name=/usr/bin/evince-previewer

[ 3.108883] type=1505 audit(1265695813.597:8): operation="profile_load" pid=413 name=/usr/bin/evince-thumbnailer

[ 3.119870] type=1505 audit(1265695813.610:9): operation="profile_load" pid=415 name=/usr/lib/cups/backend/cups-pdf

[ 3.120589] type=1505 audit(1265695813.613:10): operation="profile_load" pid=415 name=/usr/sbin/cupsd

[ 3.776391] EXT4-fs (sdc1): internal journal on sdc1:8

[ 4.887410] udev: starting version 147

[ 7.375430] alloc irq_desc for 27 on node -1

[ 7.375433] alloc kstat_irqs on node -1

[ 7.375446] atl1 0000:02:00.0: irq 27 for MSI/MSI-X

[ 7.375666] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 8.183444] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 8.183467] HDA Intel 0000:00:1b.0: setting latency timer to 64

[ 8.377934] NET: Registered protocol family 8

[ 8.377937] NET: Registered protocol family 20

[ 8.380719] intel_rng: FWH not detected

[ 8.388325] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1091

[ 8.388351] usbcore: registered new interface driver usblp

[ 8.625011] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5

[ 8.631371] parport_pc 00:07: reported by Plug and Play ACPI

[ 8.631475] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]

[ 8.633350] lp: driver loaded but no devices found

[ 8.639362] ppdev: user-space parallel port driver

[ 8.640165] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 8.644651] [ueagle-atm] driver ueagle 1.4 loaded

[ 8.644675] usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9042) Rev (0X3000): Eagle IV

[ 8.733236] lp0: using parport0 (interrupt-driven).

[ 8.757610] usb 2-2: reset full speed USB device using uhci_hcd and address 2

[ 8.821791] psmouse serio1: ID: 10 00 64

[ 8.902144] usb 2-2: [ueagle-atm] pre-firmware device, uploading firmware

[ 8.902181] usb 2-2: [ueagle-atm] loading firmware ueagle-atm/eagleIV.fw

[ 8.902186] usb 2-2: firmware: requesting ueagle-atm/eagleIV.fw

[ 8.902230] usbcore: registered new interface driver ueagle-atm

[ 9.385761] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6

[ 9.878238] usb 2-2: [ueagle-atm] firmware uploaded

[ 10.072058] usb 2-2: USB disconnect, address 2

[ 11.672437] usb 3-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1

[ 12.404009] usb 2-2: new full speed USB device using uhci_hcd and address 3

[ 12.568505] usb 2-2: configuration #1 chosen from 1 choice

[ 12.571524] usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9041) Rev (0X30A9): Eagle IV

[ 12.685514] usb 2-2: reset full speed USB device using uhci_hcd and address 3

[ 12.845453] usb 2-2: [ueagle-atm] using iso mode

[ 12.845644] usb 2-2: [ueagle-atm] (re)booting started

[ 13.972051] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin

[ 14.223604] usb 2-2: [ueagle-atm] ATU-R firmware version : d19050b

[ 14.223609] usb 2-2: firmware: requesting ueagle-atm/CMV4i.bin.v2

[ 14.319602] usb 2-2: [ueagle-atm] modem started, waiting synchronization...

[ 24.324048] usb 2-2: [UEAGLE-ATM] reading cmv failed with error -110

[ 25.324022] usb 2-2: [ueagle-atm] (re)booting started

[ 26.448055] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin

[ 26.654841] usb 2-2: [ueagle-atm] ATU-R firmware version : d19050b

[ 26.654848] usb 2-2: firmware: requesting ueagle-atm/CMV4i.bin.v2

[ 26.732849] usb 2-2: [ueagle-atm] modem started, waiting synchronization...

[ 44.747664] usb 2-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp)

[ 44.747670] usb 2-2: [ueagle-atm] (re)booting started

[ 45.872068] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin

[ 46.078794] usb 2-2: [ueagle-atm] ATU-R firmware version : d19050b

[ 46.078800] usb 2-2: firmware: requesting ueagle-atm/CMV4i.bin.v2

[ 46.155802] usb 2-2: [ueagle-atm] modem started, waiting synchronization...

[ 64.160030] usb 2-2: [UEAGLE-ATM] reading cmv failed with error -110

[ 65.160048] usb 2-2: [ueagle-atm] (re)booting started

[ 66.284564] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin

[ 66.491850] usb 2-2: [ueagle-atm] ATU-R firmware version : d19050b

[ 66.491856] usb 2-2: firmware: requesting ueagle-atm/CMV4i.bin.v2

[ 66.568856] usb 2-2: [ueagle-atm] modem started, waiting synchronization...

[ 87.575967] usb 2-2: [ueagle-atm] modem operational

[ 91.724415] PPP BSD Compression module registered

[ 91.741402] PPP Deflate Compression module registered

[ 128.001583] usb 3-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1

john@john:~$


[linuxman]

Off topic:
Καλό θα ήτανε να σκεφτείς να πάρεις οπωσδήποτε και ένα μόντεμ/ρούτερ που θα συνδεθεί και θα είναι πάντα οκ .