Δεν εμφανίζει δίκτυο.

[simosx]

[ 68.543455] cfg80211: Calling CRDA for country: EU
[ 68.964568] usb 2-1.4: ath9k_htc: Transferred FW: ar9271.fw, size: 51312
[ 69.229939] usb 2-1.4: ath9k_htc: HTC initialized with 33 credits
[ 69.699895] ath: EEPROM regdomain: 0x809c
[ 69.699898] ath: EEPROM indicates we should expect a country code
[ 69.699901] ath: doing EEPROM country->regdmn map search
[ 69.699902] ath: country maps to regdmn code: 0x52
[ 69.699904] ath: Country alpha2 being used: CN
[ 69.699906] ath: Regpair used: 0x52

Τώρα είναι καλύτερα. Υπάρχει EU, υπάρχει και CN - Κίνα.

Δοκίμασε και την εντολή

Κώδικας: Επιλογή όλων

sudo iw reg set GR

που όπως φαίνεται επιτρέπει να αλλάξεις τη χώρα οποιαδήποτε στιγμή.
Τρέξε την εντολή «dmesg» ξανά και οι τελευταίες δέκα γραμμές πρέπει να κάνουν αναφορά για Ελλάδα.

Αν δουλέψει η σύνδεση, θα δούμε πως κάνουμε την αλλαγή μόνιμα.

[kiriakos321]

Κώδικας: Επιλογή όλων


sudo: iw: command not found


[kiriakos321]

Μήπως να απεγκαταστήσω τη κάρτα και να την εγκαταστήσω απο την αρχή?

[simosx]

Κώδικας: Επιλογή όλων


sudo: iw: command not found


Εγκατέστησε το πακέτο «iw» με

Κώδικας: Επιλογή όλων

sudo apt-get install iw


και δοκίμασε ξανά.

[kiriakos321]

Το αποτέλεσμα ήταν

Κώδικας: Επιλογή όλων

nl80211 not found.

Έδωσα πάλι την εντολή dmesg μήπως άλλαξε τίποτα.

Κώδικας: Επιλογή όλων



[ 0.191523] pnp 00:00: [mem 0x00100000-0x3f7fffff]
[ 0.191588] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.191591] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.191594] system 00:00: [mem 0x00100000-0x3f7fffff] could not be reserved
[ 0.191599] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.195375] pnp 00:01: [bus 00-ff]
[ 0.195378] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.195381] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.195383] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.195386] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.195389] pnp 00:01: [mem 0x3f800000-0xfedfffff window]
[ 0.195391] pnp 00:01: [mem 0xfee01000-0xffffffff window]
[ 0.195394] pnp 00:01: [mem 0x000d4000-0x000dffff window]
[ 0.195488] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.195683] pnp 00:02: [io 0x00f0-0x00ff]
[ 0.195699] pnp 00:02: [irq 13]
[ 0.195732] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.195745] pnp 00:03: [io 0x0000-0x000f]
[ 0.195747] pnp 00:03: [io 0x0080-0x008f]
[ 0.195749] pnp 00:03: [io 0x00c0-0x00df]
[ 0.195752] pnp 00:03: [dma 4]
[ 0.195781] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.195791] pnp 00:04: [io 0x0061]
[ 0.195820] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.195830] pnp 00:05: [io 0x0070-0x0071]
[ 0.195832] pnp 00:05: [io 0x0072-0x0073]
[ 0.195838] pnp 00:05: [irq 8]
[ 0.195872] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.195945] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.195977] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.195987] pnp 00:07: [io 0x0060]
[ 0.195990] pnp 00:07: [io 0x0064]
[ 0.195995] pnp 00:07: [irq 1]
[ 0.196041] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.196056] pnp 00:08: [irq 12]
[ 0.196091] pnp 00:08: Plug and Play ACPI device, IDs SYN0159 SYN0100 SYN0002 PNP0f13 (active)
[ 0.196180] pnp 00:09: [io 0x0010-0x001f]
[ 0.196188] pnp 00:09: [io 0x0024-0x003f]
[ 0.196191] pnp 00:09: [io 0x004e-0x004f]
[ 0.196193] pnp 00:09: [io 0x0050-0x0053]
[ 0.196195] pnp 00:09: [io 0x0063]
[ 0.196197] pnp 00:09: [io 0x0065]
[ 0.196199] pnp 00:09: [io 0x0067]
[ 0.196201] pnp 00:09: [io 0x0074-0x0077]
[ 0.196203] pnp 00:09: [io 0x0090-0x009f]
[ 0.196205] pnp 00:09: [io 0x00a4-0x00bd]
[ 0.196207] pnp 00:09: [io 0x0500-0x057f]
[ 0.196209] pnp 00:09: [io 0x0800-0x080f]
[ 0.196212] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.196214] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.196276] system 00:09: [io 0x0500-0x057f] has been reserved
[ 0.196279] system 00:09: [io 0x0800-0x080f] has been reserved
[ 0.196282] system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.196285] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.196288] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.196995] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.196997] pnp 00:0a: [io 0x1000-0x107f]
[ 0.197000] pnp 00:0a: [io 0x1100-0x113f]
[ 0.197002] pnp 00:0a: [io 0x1200-0x121f]
[ 0.197004] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
[ 0.197007] pnp 00:0a: [mem 0xfec00000-0xfec000ff]
[ 0.197009] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.197011] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.197013] pnp 00:0a: [mem 0xfed90000-0xfed99fff]
[ 0.197081] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.197084] system 00:0a: [io 0x1000-0x107f] has been reserved
[ 0.197087] system 00:0a: [io 0x1100-0x113f] has been reserved
[ 0.197090] system 00:0a: [io 0x1200-0x121f] has been reserved
[ 0.197093] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.197096] system 00:0a: [mem 0xfec00000-0xfec000ff] could not be reserved
[ 0.197099] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.197102] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.197105] system 00:0a: [mem 0xfed90000-0xfed99fff] has been reserved
[ 0.197108] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.198178] pnp 00:0b: [mem 0x000cee00-0x000cffff]
[ 0.198181] pnp 00:0b: [mem 0x000d2000-0x000d3fff]
[ 0.198184] pnp 00:0b: [mem 0xfeda0000-0xfedbffff]
[ 0.198186] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.198254] system 00:0b: [mem 0x000cee00-0x000cffff] has been reserved
[ 0.198257] system 00:0b: [mem 0x000d2000-0x000d3fff] has been reserved
[ 0.198260] system 00:0b: [mem 0xfeda0000-0xfedbffff] has been reserved
[ 0.198263] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.198267] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.198283] pnp: PnP ACPI: found 12 devices
[ 0.198284] ACPI: ACPI bus type pnp unregistered
[ 0.198289] PnPBIOS: Disabled by ACPI PNP
[ 0.234837] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.234842] pci 0000:00:1c.4: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.234846] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.234849] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
[ 0.234852] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.234858] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.234863] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.234872] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
[ 0.234876] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.234883] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff]
[ 0.234889] pci 0000:00:1c.1: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.234898] pci 0000:00:1c.4: PCI bridge to [bus 28-28]
[ 0.234901] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
[ 0.234909] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
[ 0.234914] pci 0000:00:1c.4: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.234923] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.234925] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.234932] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.234937] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.234964] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.234971] pci 0000:00:1c.0: setting latency timer to 64
[ 0.234983] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.234988] pci 0000:00:1c.1: setting latency timer to 64
[ 0.234997] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.235002] pci 0000:00:1c.4: setting latency timer to 64
[ 0.235011] pci 0000:00:1e.0: setting latency timer to 64
[ 0.235016] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.235018] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.235021] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.235024] pci_bus 0000:00: resource 7 [mem 0x3f800000-0xfedfffff]
[ 0.235026] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
[ 0.235029] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000dffff]
[ 0.235031] pci_bus 0000:10: resource 0 [io 0x5000-0x5fff]
[ 0.235034] pci_bus 0000:10: resource 1 [mem 0xe4000000-0xe40fffff]
[ 0.235037] pci_bus 0000:10: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.235039] pci_bus 0000:28: resource 0 [io 0x2000-0x3fff]
[ 0.235042] pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff]
[ 0.235045] pci_bus 0000:28: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.235047] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.235050] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.235052] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.235055] pci_bus 0000:02: resource 7 [mem 0x3f800000-0xfedfffff]
[ 0.235058] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
[ 0.235060] pci_bus 0000:02: resource 9 [mem 0x000d4000-0x000dffff]
[ 0.235101] NET: Registered protocol family 2
[ 0.235167] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.235411] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.235950] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.236360] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.236364] TCP reno registered
[ 0.236371] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.236386] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.236525] NET: Registered protocol family 1
[ 0.236556] pci 0000:00:02.0: Boot video device
[ 0.236714] PCI: CLS 64 bytes, default 64
[ 0.236982] cpufreq-nforce2: No nForce2 chipset.
[ 0.237131] audit: initializing netlink socket (disabled)
[ 0.237146] type=2000 audit(1304077943.236:1): initialized
[ 0.247189] Trying to unpack rootfs image as initramfs...
[ 0.264424] highmem bounce pool size: 64 pages
[ 0.264432] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.272047] VFS: Disk quotas dquot_6.5.2
[ 0.272147] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.272945] fuse init (API version 7.16)
[ 0.273052] msgmni has been set to 1704
[ 0.280265] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.280297] io scheduler noop registered
[ 0.280299] io scheduler deadline registered
[ 0.280318] io scheduler cfq registered (default)
[ 0.280453] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.280524] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.280618] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.280679] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.280766] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.280826] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.280935] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.280960] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.281026] intel_idle: MWAIT substates: 0x1110
[ 0.281028] intel_idle: does not run on family 6 model 22
[ 0.284586] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.284731] ACPI: AC Adapter [C23A] (on-line)
[ 0.284825] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.284831] ACPI: Sleep Button [C2B4]
[ 0.284877] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.284918] ACPI: Lid Switch [C154]
[ 0.284970] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.284973] ACPI: Power Button [PWRF]
[ 0.285073] ACPI: Fan [C3B7] (off)
[ 0.285141] ACPI: Fan [C3B8] (off)
[ 0.285204] ACPI: Fan [C3B9] (off)
[ 0.285266] ACPI: Fan [C3BA] (off)
[ 0.285328] ACPI: Fan [C3BB] (off)
[ 0.285541] ACPI: acpi_idle registered with cpuidle
[ 0.292039] Monitor-Mwait will be used to enter C-1 state
[ 0.292094] Monitor-Mwait will be used to enter C-2 state
[ 0.292100] Marking TSC unstable due to TSC halts in idle
[ 0.298086] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.298090] ACPI: Thermal Zone [TZ3] (55 C)
[ 0.313768] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.313772] ACPI: Thermal Zone [TZ4] (28 C)
[ 0.317414] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.317417] ACPI: Thermal Zone [TZ5] (65 C)
[ 0.337446] thermal LNXTHERM:03: registered as thermal_zone3
[ 0.337450] ACPI: Thermal Zone [TZ0] (65 C)
[ 0.341040] thermal LNXTHERM:04: registered as thermal_zone4
[ 0.341043] ACPI: Thermal Zone [TZ1] (63 C)
[ 0.341092] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.344148] ERST: Table is not found!
[ 0.344254] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.345772] Linux agpgart interface v0.103
[ 0.345842] agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
[ 0.345900] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.346110] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.346237] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.347563] brd: module loaded
[ 0.348396] isapnp: Scanning for PnP cards...
[ 0.400092] loop: module loaded
[ 0.400214] i2c-core: driver [adp5520] using legacy suspend method
[ 0.400217] i2c-core: driver [adp5520] using legacy resume method
[ 0.400344] ata_piix 0000:00:1f.1: version 2.13
[ 0.400360] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.400406] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.403066] scsi0 : ata_piix
[ 0.404347] scsi1 : ata_piix
[ 0.404811] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
[ 0.404814] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
[ 0.405446] Fixed MDIO Bus: probed
[ 0.405569] PPP generic driver version 2.4.2
[ 0.405640] tun: Universal TUN/TAP device driver, 1.6
[ 0.405642] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.405743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.405782] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.405804] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.405809] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.405855] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.405894] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.409784] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.412199] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4621000
[ 0.416139] ata2: port disabled. ignoring.
[ 0.463692] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.463873] hub 1-0:1.0: USB hub found
[ 0.463878] hub 1-0:1.0: 4 ports detected
[ 0.463975] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.463998] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.464018] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.588401] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.588457] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.592343] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.592712] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2
[ 0.596133] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4628000
[ 0.656047] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.656263] hub 2-0:1.0: USB hub found
[ 0.656268] hub 2-0:1.0: 6 ports detected
[ 0.656365] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.656383] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.656441] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.656451] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.656456] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.656503] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.656553] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004040
[ 0.656688] hub 3-0:1.0: USB hub found
[ 0.656692] hub 3-0:1.0: 2 ports detected
[ 0.656765] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.656775] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.656779] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.656818] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.656850] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
[ 0.656988] hub 4-0:1.0: USB hub found
[ 0.656992] hub 4-0:1.0: 2 ports detected
[ 0.657069] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.657076] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.657080] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.657129] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 0.657170] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
[ 0.657295] hub 5-0:1.0: USB hub found
[ 0.657299] hub 5-0:1.0: 2 ports detected
[ 0.657369] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.657376] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.657380] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.657424] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 0.657455] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
[ 0.657581] hub 6-0:1.0: USB hub found
[ 0.657585] hub 6-0:1.0: 2 ports detected
[ 0.657723] i8042: PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
[ 0.659336] i8042: Detected active multiplexing controller, rev 1.1
[ 0.660126] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.660381] ata1.00: configured for MWDMA2
[ 0.795719] isapnp: No Plug & Play device found
[ 0.835142] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.835149] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.835153] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.835156] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.835298] mousedev: PS/2 mouse device common for all mice
[ 0.835476] rtc_cmos 00:05: RTC can wake from S4
[ 0.835533] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.835606] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.835732] device-mapper: uevent: version 1.0.3
[ 0.835819] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.838747] device-mapper: multipath: version 1.2.0 loaded
[ 0.838751] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.838871] EISA: Probing bus 0 at eisa.0
[ 0.838874] EISA: Cannot allocate resource for mainboard
[ 0.838877] Cannot allocate resource for EISA slot 1
[ 0.838878] Cannot allocate resource for EISA slot 2
[ 0.838880] Cannot allocate resource for EISA slot 3
[ 0.838882] Cannot allocate resource for EISA slot 4
[ 0.838884] Cannot allocate resource for EISA slot 5
[ 0.838886] Cannot allocate resource for EISA slot 6
[ 0.838888] Cannot allocate resource for EISA slot 7
[ 0.838890] Cannot allocate resource for EISA slot 8
[ 0.838891] EISA: Detected 0 cards.
[ 0.842245] ACPI: Battery Slot [C23B] (battery present)
[ 0.842308] cpuidle: using governor ladder
[ 0.842350] cpuidle: using governor menu
[ 0.842616] TCP cubic registered
[ 0.842762] NET: Registered protocol family 10
[ 0.843257] NET: Registered protocol family 17
[ 0.843283] Registering the dns_resolver key type
[ 0.843334] Using IPI No-Shortcut mode
[ 0.843464] PM: Hibernation image not present or could not be loaded.
[ 0.843476] registered taskstats version 1
[ 0.843802] Magic number: 7:671:884
[ 0.843925] rtc_cmos 00:05: setting system clock to 2011-04-29 11:52:24 UTC (1304077944)
[ 0.843929] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.843930] EDD information not available.
[ 0.845615] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632N 0503 PQ: 0 ANSI: 5
[ 0.853133] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.853139] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.853294] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.853394] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.856840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.972133] Freeing initrd memory: 12524k freed
[ 0.981071] Freeing unused kernel memory: 700k freed
[ 0.981610] Write protecting the kernel text: 5192k
[ 0.981640] Write protecting the kernel read-only data: 2148k
[ 1.004065] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.009615] <30>udev[68]: starting version 167
[ 1.136733] hub 2-1:1.0: USB hub found
[ 1.136820] hub 2-1:1.0: 4 ports detected
[ 1.238815] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 1.238819] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 1.238872] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.238884] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.239009] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 1.432045] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 1.478313] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:22:64:67:04:1e
[ 1.478317] e1000e 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
[ 1.478348] e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 7, PBA No: FFFFFF-0FF
[ 1.478369] ahci 0000:00:1f.2: version 3.0
[ 1.478385] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.478450] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.478495] ahci: SSS flag set, parallel bus scan disabled
[ 1.478533] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.478537] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
[ 1.478543] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.480477] scsi2 : ahci
[ 1.480646] scsi3 : ahci
[ 1.480778] scsi4 : ahci
[ 1.480937] ata3: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629100 irq 44
[ 1.480942] ata4: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629180 irq 44
[ 1.480945] ata5: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629200 irq 44
[ 1.768501] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input4
[ 1.768701] generic-usb 0003:09DA:0260.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-2/input0
[ 1.792088] usb 2-1.3: new low speed USB device using ehci_hcd and address 4
[ 1.800047] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.802248] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.802253] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.802301] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.802305] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.802921] ata3.00: ATA-8: ST9160827AS, 3.AHC, max UDMA/100
[ 1.802924] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.805230] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.805235] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.805283] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.805287] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.805929] ata3.00: configured for UDMA/100
[ 1.806064] scsi 2:0:0:0: Direct-Access ATA ST9160827AS 3.AH PQ: 0 ANSI: 5
[ 1.806258] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.806366] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.806420] sd 2:0:0:0: [sda] Write Protect is off
[ 1.806424] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.806447] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.841655] sda: sda1 sda2 < sda5 >
[ 1.841978] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.861058] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.1/input/input5
[ 1.861244] generic-usb 0003:09DA:0260.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-2/input1
[ 1.861460] usbcore: registered new interface driver usbhid
[ 1.861462] usbhid: USB HID core driver
[ 1.914453] input: MLK MEDIA-TECH MT1062 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/input/input6
[ 1.914658] generic-usb 0003:04FC:05DA.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MLK MEDIA-TECH MT1062] on usb-0000:00:1d.7-1.3/input0
[ 2.124061] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.444055] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.844748] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.937254] Adding 1038332k swap on /dev/sda5. Priority:-1 extents:1 across:1038332k
[ 14.000156] <30>udev[303]: starting version 167
[ 14.153258] lp: driver loaded but no devices found
[ 14.159497] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.364542] lib80211: common routines for IEEE802.11 drivers
[ 14.373139] lib80211_crypt: registered algorithm 'NULL'
[ 14.480447] type=1400 audit(1304077958.133:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=514 comm="apparmor_parser"
[ 14.481805] type=1400 audit(1304077958.133:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
[ 14.482414] type=1400 audit(1304077958.133:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
[ 14.910379] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 14.920372] wl: module license 'MIXED/Proprietary' taints kernel.
[ 14.920377] Disabling lock debugging due to kernel taint
[ 14.964212] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 14.964481] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.173806] [drm] Initialized drm 1.1.0 20060810
[ 15.320949] type=1400 audit(1304077958.973:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=681 comm="apparmor_parser"
[ 15.326879] type=1400 audit(1304077958.977:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=683 comm="apparmor_parser"
[ 15.331471] type=1400 audit(1304077958.981:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=683 comm="apparmor_parser"
[ 15.335854] type=1400 audit(1304077958.985:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=683 comm="apparmor_parser"
[ 15.356095] type=1400 audit(1304077959.009:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=684 comm="apparmor_parser"
[ 15.389727] type=1400 audit(1304077959.041:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=684 comm="apparmor_parser"
[ 15.415028] type=1400 audit(1304077959.065:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=684 comm="apparmor_parser"
[ 15.779788] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x200000/0x0
[ 15.887221] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 15.941626] wl 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 15.941637] wl 0000:10:00.0: setting latency timer to 64
[ 15.988329] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 16.003322] lib80211_crypt: registered algorithm 'TKIP'
[ 16.241670] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.241679] i915 0000:00:02.0: setting latency timer to 64
[ 16.293668] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
[ 16.366966] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 16.366974] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 16.366976] [drm] Driver supports precise vblank timestamp query.
[ 16.524204] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 16.524640] [drm] initialized overlay support
[ 16.868274] Console: switching to colour frame buffer device 160x50
[ 16.868310] fb0: inteldrmfb frame buffer device
[ 16.868311] drm: registered panic notifier
[ 16.869909] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20110112/exoparg2-418)
[ 16.869926] ACPI Error: Method parse/execution failed [\_SB_.C003.C099._DOD] (Node f54275a0), AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
[ 16.869937] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20110112/video-1139)
[ 16.873362] acpi device:01: registered as cooling_device6
[ 16.874576] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 16.874805] ACPI: Video Device [C099] (multi-head: yes rom: no post: no)
[ 16.875894] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 16.883023] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 16.883036] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 16.883046] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.883142] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 16.883183] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.984396] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 17.297808] ppdev: user-space parallel port driver
[ 21.109808] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 27.088039] eth1: no IPv6 routers present



[medigeek]

nl80211 not found.

Αυτό σημαίνει πως δε βρήκε το usb wifi. Μήπως δεν το σύνδεσες;

Δώσε:

Κώδικας: Επιλογή όλων

lsusb
lspci -nn
sudo lshw -C network

[kiriakos321]

nl80211 not found.

Αυτό σημαίνει πως δε βρήκε το usb wifi. Μήπως δεν το σύνδεσες;

Δώσε:

Κώδικας: Επιλογή όλων

lsusb
lspci -nn
sudo lshw -C network

Usb wifi? Εγώ ασύρματα ρούτερ θέλω

[bekatsas]

Εχω στον Acer Aspire την καρτα δικτυου Broadcom BCM 4318. μεχρι τωρα το ubuntu μεχρι και την εκδοση 10.10 δεν την εβλεπαν. με την αναβαθμιση στο 11.04 την ενεργοποιησε αμεσως!!!

[simosx]

Εχω στον Acer Aspire την καρτα δικτυου Broadcom BCM 4318. μεχρι τωρα το ubuntu μεχρι και την εκδοση 10.10 δεν την εβλεπαν. με την αναβαθμιση στο 11.04 την ενεργοποιησε αμεσως!!!

Είσαι στην αντίθετη περίπτωση από τον Κυριάκο.
Στη δική σου περίπτωση η Broadcom που είχες δε λειτουργούσε με τον ndiswrapper (έπρεπε να το βάλεις από το Πρόσθετοι οδηγοί), και τώρα στο 11.04 που έχουμε ανοιχτούς οδηγούς για τις Broadcom, σε σένα οι ανοιχτοί οδηγοί λειτουργούν μια χαρά.

[kiriakos321]

Καλημέρα,χθές το βράδι με τη βοήθεια του simosx στο chat της κοινότητας βρήκαμε το πρόβλημα και σύμφωνα με αυτό το σίτε http://ubuntuforums.org/showthread.php?t=1738740 πρέπει να εγκαταστήσω κάποια πακέτα,τα πακέτα (.deb) τα άνοιξα με το Ubuntu software center και μου έδειχνε μύνημα : A later version is already installed. Δηλαδή έχω είδη το συγκεκριμένο πακέτο.