Έλεγχος σκληρού δίσκου Hardware

[airmaik]

δεν μου εχει κανει τιποτα μεχρι τωρα ομως καμια ανωμαλία,σε τι ακριβός εχει δηλαδή?δεν ειναι να βαζω αρχεια να τον εμπιστεύομαι γενικος!!

[simosx]

πρεπει να ανυσυχω?

Ναι ! Ο δίσκος σου έχει πρόβλημα.

Πάρε αντίγραφα ασφαλείας των δεδομένων σου.
Μπορείς να επιλέξεις να εξακολουθήσεις να χρησιμοποιείς το δίσκο μέχρι να χαλάσει ώστε να πάρεις νέο (και διατηρείς πολύ τακτικά αντίγραφα ασφαλείας), ή να κάνεις την αλλαγή δίσκου πιο σύντομα.

Το ζήτημα με τα bad sectors είναι ότι δεν ξέρεις αν θα υπάρξουν περισσότεροι σύντομα ή σε μετά από 2-3 χρόνια. Ο δίσκος σου έχει 100 sectors στην άκρη για διόρθωση προβλημάτων, και τώρα χρησιμοποιήθηκαν οι 22. Οπότε, έχεις 78 που απομένουν.

[airmaik]

οκ ευχαριστω παιδια για την απαντησεις σας,με βλεπω τα χριστουγεννα να παιρνω εναν οπωσδήποτε

[the_eye]

Το σημαντικότερο πρόβλημα είναι ότι η κεφαλή διαβάζει με λάθη μέχρι τώρα 103419890
ακόμα η κεφαλή δεν μπορεί να "εστιάσει" τα δεδομένα 180469905 λάθη

Καλό είναι να πάρεις backup τα δεδομένα σου και να περιμένεις να αγοράσεις δίσκο αργότερα γιατί τώρα έχουν αυξηθεί ως και 180% οι τιμές τους.
http://blog.zorinaq.com/?e=62

[airmaik]

σημερα ανοιξα τον υπολογιστη μου και μου εκανε 3,4 φορες επανεκκινηση

ειπα να κανω εναν ελεγχο να δω μηπως φταει κατι απο τους σκληρους μου

στον πρωτο οπου δεν εχω πανω απο 4 μηνες που τον αγορασα εχω αυτα τα αποτελεσματα,

Κώδικας: Επιλογή όλων

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD5000AAKX-001CA0
Serial Number: WD-WMAYU2050012
LU WWN Device Id: 5 0014ee 05826a4d4
Firmware Version: 15.01H15
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Nov 25 14:41:25 2011 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 8700) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 88) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 158 140 021 Pre-fail Always - 3091
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 358
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1072
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 356
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 223
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 134
194 Temperature_Celsius 0x0022 116 096 000 Old_age Always - 27
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

και στον δευτερο οπου τον εχω καμια 5 χρονια τουλαχιστον εχω αυτα

Κώδικας: Επιλογή όλων

=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint S250
Device Model: SAMSUNG HD250HJ
Serial Number: 340421IPB19769
LU WWN Device Id: 5 0000f0 01bb19769
Firmware Version: FH100-06
User Capacity: 250.059.350.016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Fri Nov 25 14:41:37 2011 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 3657) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 61) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 253 253 025 Pre-fail Always - 4480
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2417
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8557
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1759
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 412238
184 End-to-End_Error 0x0033 253 253 099 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always - 0
188 Command_Timeout 0x0032 253 253 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 178 112 000 Old_age Always - 20 (Min/Max 5/42)
194 Temperature_Celsius 0x0022 169 109 000 Old_age Always - 23 (Min/Max 5/43)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 412238
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always - 0
202 Data_Address_Mark_Errs 0x0032 253 253 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

οταν κανει τις επανεκινησεις ακουγεται πολυ το τροφοδοτικο

[the_eye]

Ο δεύτερος έχει πρόβλημα.

Κώδικας: Επιλογή όλων

Device Model: SAMSUNG HD250HJ
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 412238
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 412238

[airmaik]

ειναι για αλλαγή κοινός ε?

παλια σε αυτην την θεση πο βαζω τον δευτερο σκληρό ειχα εναν που με ειχε χαλάσει 3,4 φορες

και τον ειχα αλλάξει μεσα στην εγγύηση,μολις αγορασα τον καινουργιο τον εβαλα στην πρωτη θεση και άλλαξα αυτον που μου ειπες τωρα και τον εβαλα στην δευτερη,και οριστε που χαλασε και αυτος

υπαρχει περίπτωση να φταει κατι αλλο και να χαλαει τους σκληρούς?

π,χ κατι με το καλώδιο που δινει το ρευμα?

θα μου πεις μπορει και να ετυχε,τον εχω και 4 χρονια αυτον

[billver]

περιπου πριν απο κανενα τρίμηνο ειχα αυτα τα αποτελεσματα

Κώδικας: Επιλογή όλων

smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint T166 series
Device Model: SAMSUNG HD501LJ
Serial Number: S0MUJ1KLC54980
Firmware Version: CR100-06
User Capacity: 500.107.862.016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Tue Aug 23 18:53:44 2011 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (8718) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 149) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 253 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 100 100 015 Pre-fail Always - 7552
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3291
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 7045
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 253 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1735
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1572981
188 Command_Timeout 0x0032 253 253 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 064 058 000 Old_age Always - 36
194 Temperature_Celsius 0x0022 130 112 000 Old_age Always - 36
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 26848
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always - 0
202 Data_Address_Mark_Errs 0x0032 253 253 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

οπου ειχες γραψει

Δεν βλέπω κάποιο άμεσο πρόβλημα πέραν του

Κώδικας: Επιλογή όλων

195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 26848

που λέει ότι βρήκε κάποια προβλήματα ανάγνωσης ή εγγραφής αλλά ανακτήθηκαν.

Αν μελλοντικά σου βγάλει και άλλα τον αλλάζεις.

τωρα εχω αυτα

Κώδικας: Επιλογή όλων

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.1.0-1-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint T166
Device Model: SAMSUNG HD501LJ
Serial Number: S0MUJ1KLC54980
Firmware Version: CR100-06
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Thu Jan 26 02:00:41 2012 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 8718) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 149) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 4
3 Spin_Up_Time 0x0007 100 100 015 Pre-fail Always - 4608
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3581
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 7875
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 253 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1924
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1572981
188 Command_Timeout 0x0032 253 253 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 058 000 Old_age Always - 31
194 Temperature_Celsius 0x0022 145 112 000 Old_age Always - 31
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 73529842
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
197 Total_Pending_Sectors 0x0012 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
202 Data_Address_Mark_Errs 0x0032 253 253 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ειμαι ακομα μεσα στα ορια?γενικα καλα μου παει ο σκληρος δεν εχω δει καποιο πρόβλημα απλα επειδη ειχες πει να το παρακολουθώ

[the_eye]

Χειροτερεύει

Κώδικας: Επιλογή όλων

195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 73529842

αλλά οι άλλοι δείκτες είναι σχετικά καλά. Στην θέση σου δεν θα έβαζα σημαντικά αρχεία σε αυτόν τον δίσκο.

[billver]

σημαντικά αρχεία αμάν δεν εχω

αρα για χρήση ακόμα καλός ειναι απλα θέλει προσοχή ετσι δεν είναι?