Σφάλματα κατα την εκκίνηση του conky monitor tool

[xmarkx]

Καλησέρα, όταν προσπαθώ να ανοίξω το conky μου εμφανίζει αυτα

Κώδικας: Επιλογή όλων

Conky: use_spacer should have an argument of left, right, or none. 'yes' seems to be some form of 'true', so defaulting to right.
Conky: /home/xmarkx/.conkyrc: 47: no such configuration: 'border_margin'
Conky: statfs64 '/media/data': No such file or directory
Conky: desktop window (160002a) is subwindow of root window (c1)
Conky: window type - override
Conky: drawing to created window (0x3c00001)
Conky: drawing to double buffer
Conky: can't load font 'arial'
Conky: statfs64 '/media/data': No such file or directory
tail: cannot open ‘/var/log/messages’ for reading: No such file or directory
Conky: statfs64 '/media/data': No such file or directory

έκανα ελπίζω σωστά την εγκατάσταση αλλά κάτι δεν πάει καλα; Τα έχει βγάλει σε κάποιον άλλο; :/

[Learner]

Θα πρέπει να κάνεις ποστ και το .conkyrc για να δούμε τα λάθη που υπάρχουν εκεί μέσα.

[xmarkx]

Έχω δοκιμάσει πολλά μπας και έχουν λάθη. Θα προσπαθήσω να θυμηθώ πιο ήταν να το ανεβάσω. Τώρα πχ έχω ένα που δεν βγάζει λάθος αλλά δεν ανοίγει και το ψονκυ. Θα τα ποστάρω και τα δυο μολις γυρίσω...

[sotos21]

Βλέπω δύο σφάλματα
α) can't load font 'arial'
Που σημαίνει ότι δεν έχεις εγκατεστημένες τις γραμματοσειρές arial και
β)'/media/data': No such file or directory
Που σημαίνει δεν βρίσκει φάκελο με όνομα data στην διαδρομή /media/
Για το α αν λες ότι έχεις τις γραμματοσειρές, τότε δημιούργησε ένα φάκελο με όνομα .fonts στον προσωπικό σου φάκελο και αντέγραψε τες μέσα(προσοχή στην τελεία)

[xmarkx]

Θα πρέπει να κάνεις ποστ και το .conkyrc για να δούμε τα λάθη που υπάρχουν εκεί μέσα.

Κώδικας: Επιλογή όλων

# conky configuration
# edited by darcon@gmail.com

# set to yes if you want Conky to be forked in the background
background no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*


# Use Xft?
use_xft yes

# Xft font when Xft is enabled
#xftfont Bitstream Vera Sans Mono:size=8
xftfont Terminus:size=8

# Text alpha when using Xft
xftalpha 0.8

# Print everything to console?
# out_to_console no

# mail spool
#mail_spool $MAIL

# Update interval in seconds
update_interval 2.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window no

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 1000 5

# Draw shades?
draw_shades yes

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders 8

# border margins
border_margin 4

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color white

# Text alignment, other possible values are commented
alignment top_left
#alignment top_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 450
gap_y 1

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale no


# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer yes
#Note: doesn't work in conky 1.2 =(

# mldonkey_hostname Hostname for mldonkey stuff, defaults to localhost
# mldonkey_port Mldonkey port, 4001 default
# mldonkey_login Mldonkey login, default none
# mldonkey_password Mldonkey password, default none


# Possible variables to be used:
#
# Variable Arguments Description

# addr (interface) IP address for an interface
# acpiacadapter ACPI ac adapter state.
# acpifan ACPI fan state
# acpitemp ACPI temperature.
# adt746xcpu CPU temperature from therm_adt746x
# adt746xfan Fan speed from therm_adt746x
# alignr (num) Right-justify text, with space of N
# alignc Align text to centre
# battery (num) Remaining capasity in ACPI or APM
# battery. ACPI battery number can be
# given as argument (default is BAT0).
# buffers Amount of memory buffered
# cached Amount of memory cached
# color (color) Change drawing color to color
# cpu CPU usage in percents
# cpubar (height) Bar that shows CPU usage, height is
# bar's height in pixels
# cpugraph (height),(width) (gradient colour 1) (gradient colour 2)
# CPU usage graph, with optional colours in hex,
# minus the #.
# downspeed net Download speed in kilobytes
# downspeedf net Download speed in kilobytes with one
# decimal
# downspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2)
# Download speed graph, colours defined in
# hex, minus the #.
# exec shell command Executes a shell command and displays
# the output in conky. warning: this
# takes a lot more resources than other
# variables. I'd recommend coding wanted
# behaviour in C and posting a patch :-).
# execbar shell command Same as exec, except if the first value
# return is a value between 0-100, it
# will use that number for a bar.
# The size for the bar is currently fixed,
# but that may change in the future.
# execgraph shell command Same as execbar, but graphs values
# execi interval, shell command
# Same as exec but with specific interval.
# Interval can't be less than
# update_interval in configuration.
# font font Specify a different font. Only applies
# to one line.
# fs_bar (height), (fs)Bar that shows how much space is used on
# a file system. height is the height in
# pixels. fs is any file on that file
# system.
# fs_free (fs) Free space on a file system available
# for users.
# fs_free_perc (fs) Free percentage of space on a file
# system available for users.
# fs_size (fs) File system size
# fs_used (fs) File system used space
# hr (height) Horizontal line, height is the height in
# pixels
# i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev
# may be omitted if you have only one I2C
# device. type is either in (or vol)
# meaning voltage, fan meaning fan or
# temp/tempf (first in C, second in F)
# meaning temperature. n is number of the
# sensor. See /sys/bus/i2c/devices/ on
# your local computer.
# if_running (process) if PROCESS is running, display
# everything if_running and the matching $endif
# if_existing (file) if FILE exists, display everything between
# if_existing and the matching $endif
# if_mounted (mountpoint) if MOUNTPOINT is mounted, display everything between
# if_mounted and the matching $endif
# else Text to show if any of the above are not true
# kernel Kernel version
# linkstatus (interface) Get the link status for wireless connections
# loadavg (1), (2), (3) System load average, 1 is for past 1
# minute, 2 for past 5 minutes and 3 for
# past 15 minutes.
# machine Machine, i686 for example
# mails Mail count in mail spool. You can use
# program like fetchmail to get mails from
# some server using your favourite
# protocol. See also new_mails.
# mem Amount of memory in use
# membar (height) Bar that shows amount of memory in use
# memmax Total amount of memory
# memperc Percentage of memory in use
#
# metar_ob_time
# metar_temp
# metar_tempf Temp in F
# metar_windchill
# metar_dew_point There are a bunch of these
# metar_rh and they are self-explanatory
# metar_windspeed
# metar_winddir
# metar_swinddir
# metar_cloud
# metar_u2d_time
#
# ml_upload_counter total session upload in mb
# ml_download_counter total session download in mb
# ml_nshared_files number of shared files
# ml_shared_counter total session shared in mb, buggy
# in some mldonkey versions
# ml_tcp_upload_rate tcp upload rate in kb/s
# ml_tcp_download_rate tcp download rate in kb/s
# ml_udp_upload_rate udp upload rate in kb/s
# ml_udp_download_rate udp download rate in kb/s
# ml_ndownloaded_files number of completed files
# ml_ndownloading_files number of downloading files
#
# mpd_artist Artist in current MPD song
# (must be enabled at compile)
# mpd_album Album in current MPD song
# mpd_bar (height) Bar of mpd's progress
# mpd_bitrate Bitrate of current song
# mpd_status Playing, stopped, et cetera.
# mpd_title Title of current MPD song
# mpd_vol MPD's volume
# mpd_elapsed Song's elapsed time
# mpd_length Song's length
# mpd_percent Percent of song's progress
# new_mails Unread mail count in mail spool.
# nodename Hostname
# outlinecolor (color) Change outline color
# pre_exec shell command Executes a shell command one time before
# conky displays anything and puts output
# as text.
# processes Total processes (sleeping and running)
# running_processes Running processes (not sleeping),
# requires Linux 2.6
# shadecolor (color) Change shading color
# stippled_hr (space), Stippled (dashed) horizontal line
# (height)
# swapbar (height) Bar that shows amount of swap in use
# swap Amount of swap in use
# swapmax Total amount of swap
# swapperc Percentage of swap in use
# sysname System name, Linux for example
# offset pixels Move text over by N pixels
# tail logfile, lines (interval)
# Displays last N lines of supplied text
# text file. If interval is not supplied,
# Conky assumes 2x Conky's interval.
# Max of 30 lines.
# Max of 30 lines can be displayed.
# time (format) Local time, see man strftime to get more
# information about format
# totaldown net Total download, overflows at 4 GB on
# Linux with 32-bit arch and there doesn't
# seem to be a way to know how many times
# it has already done that before conky
# has started.
# top type, num This takes arguments in the form:
# top <name> <number>
# Basically, processes are ranked from
# highest to lowest in terms of cpu
# usage, which is what <num> represents.
# The types are: "name", "pid", "cpu", and
# "mem".
# There can be a max of 10 processes listed.
# top_mem type, num Same as top, except sorted by mem usage
# instead of cpu
# totalup net Total upload, this one too, may overflow
# updates Number of updates (for debugging)
# upspeed net Upload speed in kilobytes
# upspeedf net Upload speed in kilobytes with one
# decimal
# upspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2)
# Upload speed graph, colours defined in
# hex, minus the #.
# uptime Uptime
# uptime_short Uptime in a shorter format
#
# seti_prog Seti@home current progress
# seti_progbar (height) Seti@home current progress bar
# seti_credit Seti@hoome total user credit


# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument

# stuff after 'TEXT' will be formatted on screen

TEXT



${offset 240}${color slate grey}${time %a, } ${color }${time %e %B %G}
${offset 240}${color slate grey}${time %Z, }${color }${time %H:%M:%S}
${offset 240}${color slate grey}UpTime: ${color }$uptime
${offset 240}${color slate grey}Kern:${color }$kernel
${offset 240}${color slate grey}CPU:${color } $cpu% ${acpitemp}C
${offset 240}${cpugraph 20,130 000000 ffffff}
${offset 240}${color slate grey}Load: ${color }$loadavg
${offset 240}${color slate grey}Processes: ${color }$processes
${offset 240}${color slate grey}Running: ${color }$running_processes

${offset 240}${color slate grey}Highest CPU:
${offset 240}${color #ddaa00} ${top name 1}${top_mem cpu 1}
${offset 240}${color lightgrey} ${top name 2}${top cpu 2}
${offset 240}${color lightgrey} ${top name 3}${top cpu 3}
${offset 240}${color lightgrey} ${top name 4}${top cpu 4}

${offset 240}${color slate grey}Highest MEM:
${offset 240}${color #ddaa00} ${top_mem name 1}${top_mem mem 1}
${offset 240}${color lightgrey} ${top_mem name 2}${top_mem mem 2}
${offset 240}${color lightgrey} ${top_mem name 3}${top_mem mem 3}
${offset 240}${color lightgrey} ${top_mem name 4}${top_mem mem 4}

${offset 240}${color slate grey}MEM: ${color } $memperc% $mem/$memmax
${offset 240}${membar 3,100}
${offset 240}${color slate grey}SWAP: ${color }$swapperc% $swap/$swapmax
${offset 240}${swapbar 3,100}

${offset 240}${color slate grey}ROOT: ${color }${fs_free /}/${fs_size /}
${offset 240}${fs_bar 3,100 /}
${offset 240}${color slate grey}HOME: ${color }${fs_free /home}/${fs_size /home}
${offset 240}${fs_bar 3,100 /home}
${offset 240}${color slate grey}SLACK: ${color }${fs_free /mnt/slack}/${fs_size /mnt/slack}
${offset 240}${fs_bar 3,100 /mnt/slack}
${offset 240}${color slate grey}NET:
${offset 240}${color}Up: ${color }${upspeed eth0} k/s
${offset 240}${upspeedgraph eth0 20,130 000000 ffffff}
${offset 240}${color}Down: ${color }${downspeed eth0}k/s${color}
${offset 240}${downspeedgraph eth0 20,130 000000 ffffff}









${color slate grey}/var/log/messages:
${color}${exec tail -n20 /var/log/messages}

Σε αυτόν τον κώδικα όταν το ξεκινάω βγάζει αυτα:

Κώδικας: Επιλογή όλων

xmarkx@Jarvis:~$ conky -c ~/.conkyrc
Conky: /home/xmarkx/.conkyrc: 62: no such configuration: 'border_margin'
Conky: use_spacer should have an argument of left, right, or none. 'yes' seems to be some form of 'true', so defaulting to right.
Conky: statfs64 '/mnt/slack': No such file or directory
Conky: desktop window (160002a) is subwindow of root window (c1)
Conky: drawing to desktop window
Conky: drawing to double buffer
Conky: statfs64 '/mnt/slack': No such file or directory
tail: cannot open ‘/var/log/messages’ for reading: No such file or directory
tail: cannot open ‘/var/log/messages’ for reading: No such file or directory
tail: cannot open ‘/var/log/messages’ for reading: No such file or directory
^CConky: received SIGINT or SIGTERM to terminate. bye!
xmarkx@Jarvis:~$

δεν εμφανίζεται τίποτα στο desktop επίσης

Κώδικας: Επιλογή όλων

xmarkx@Jarvis:~$ ps -aux | grep conky
xmarkx 2841 0.0 0.0 15948 936 pts/1 S+ 21:23 0:00 grep --color=auto conky
xmarkx@Jarvis:~$

δεν υπάρχει και διεργασία. Κάποιες φορές φτιάχνει διεργασία αλλά και πάλι δεν εμφανίζεται τίποτα απολύτως.

@sotos21 τις εικόνες τις έχω εκεί όπως έγραφε ο οδηγός. έχω κάνει φάκελο αλλά δεν ξέρω γιατί δεν το βρίσκει :/

[Learner]

Κώδικας: Επιλογή όλων

sudo apt-get install conky conky-all

μετά φτιάξε αυτό το .conkyrc και δες αν φορτώνει

Κώδικας: Επιλογή όλων


TEXT
S Y S T E M I N F O
${hr}
Host:$alignr$nodename
Uptime:$alignr$uptime
RAM:$alignr$mem/$memmax
Swap usage:$alignr$swap/$swapmax
Disk usage:$alignr${fs_used /}/${fs_size /}
CPU usage:$alignr${cpu cpu0}%

B A T T E R Y
${hr}
${color black}$battery
${color red}${battery_bar 11,0}


Δώσε στο τερματικό

Κώδικας: Επιλογή όλων

conky

για να ξεκινήσει.

[xmarkx]

Done...

Κώδικας: Επιλογή όλων

xmarkx@Jarvis:~$ conky
Conky: desktop window (160002a) is subwindow of root window (c1)
Conky: drawing to desktop window
Conky: drawing to single buffer
Conky: can't open /sys/class/power_supply/BAT0/uevent: No such file or directory
Conky: can't open /proc/acpi/battery/BAT0/state: No such file or directory
Conky: can't open /proc/apm: No such file or directory
Conky: can't open /sys/class/power_supply/BAT0/uevent: No such file or directory
Conky: can't open /proc/acpi/battery/BAT0/state: No such file or directory

δεν δουλεύει...η μόνη περίπτωση να ανοίξει που κατάφερα ειναι να ασβήσω όλα τα .conkyrc και να το φτίαχνει μόνο του με το default..

[Learner]

Ok, δεν υπάρχει κάποιο θέμα τότε. Απλά πρέπει να βρεις ένα σωστό .conkyrc ή να φτιάξεις εσύ ένα που να παίζει στο μηχάνημά σου.
Επίσης υπάρχουν και άλλες πολλές μεταβλητές που μπορείς να χρησιμοποιήσεις. Ψάξε και θα βρεις.
Δοκίμασε το παρακάτω .conkyrc

Κώδικας: Επιλογή όλων


##############################################
# Settings
##############################################
background yes
use_xft yes
xftfont Liberation Sans:size=9
xftalpha 1
update_interval 3.0
total_run_times 0
own_window yes
own_window_transparent yes
own_window_type deskope
own_window_argb_visual yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 200 200
maximum_width 240
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
default_color ede0e0
default_shade_color 000000
default_outline_color 8b8b8b
alignment top_right
gap_x 12
gap_y 36
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale yes
##############################################
# Output
##############################################
TEXT
S Y S T E M I N F O
${hr}
#Host:$alignr$nodename
Uptime:$alignr$uptime
RAM:$alignr$mem/$memmax
Swap usage:$alignr$swap/$swapmax
Disk usage:$alignr${fs_used /}/${fs_size /}
CPU usage:$alignr${cpu cpu0}%


[xmarkx]

Κάτι βγάζει: https://scontent-a-mxp.xx.fbcdn.net/hphotos-xpa1/t31.0-8/10531405_621569401275098_4002570509457843515_o.jpg

δηλαδή είναι ανάλογα το σύστημα ; Δεν παίζουν όλα παντού; :/ Εγώ δεν ξέρω και δεν έχω ιδέα πως να φτιάχω τέτοια, είχα βρει ένα απο devianart με 4 εικονίτσες απλό... :/

[Learner]

Αυτό το conky που σου έδωσα, αυτά μόνο πρέπει να βγάζει. Σωστά το φορτώνει.

δηλαδή είναι ανάλογα το σύστημα ; Δεν παίζουν όλα παντού;

Όχι ακριβώς. Αν θες να βλέπεις π.χ. τις θερμοκρασίες θα πρέπει να βρεις τις δικές σου τιμές (μέσω του sensors) και να τις προσθέσεις στο conkyrc. Παραπάνω (στο πρώτο που σου έδωσα) βλέπεις ότι η τιμή της μπαταρίας δεν υπάρχει στον δικό σου υπολογιστή και βγάζει λάθος (ή είναι desktop ή η τιμή βρίσκεται αλλού, σε άλλη διαδρομή).
Γι' αυτό λέω ότι αλλάζει αναλόγως το σύστημα. Κάποιες τιμές είναι στάνταρ, όπως αυτές που σου έδωσα.
Το deviantart είναι καλή πηγή, ψάξε βρες κάτι από εκεί και αν δεν σου δουλεύει σωστά, κάνε το ποστ εδώ να το δούμε. Επίσης μερικά conky, θέλουν και την εγκατάσταση κάποιων έξτρα πακέτων, αν χρειάζεται κάτι τέτοιο, συνήθως το γράφουν στις οδηγίες χρήσης (στην σελίδα του Deviantart).