wireless καρτα 2200bg

[darkaccess]

Γεια σας σε ολους θα ηθελα την βοηθεια σας.Εχω ενα laptop acer 1642 aspire και εχει μια καρτα intell wireless 2200bg και θα ηθελα να βαλω τους driver γιατι δεν βρισκει wi-fi internet.Διαβασα πολλα αλλα δεν καταλαβα και πολλα γιατι ειμαι αρχαριος στο χωρο τον linux,ειδα οτι πρεπει να βαλω κατι αρχεια απο τους driver των windows πατισα μια εντολη ndiswrapper αλλα δεν καταλαβα τι γινεται παρακατω και οταν την παταω μου βγαζει ενα error.Μηπως μπορει να μου πει καποιος καπιο οδηγο για να την εγκαταστησω?(ευκολο αν γινεται)

Και θα ηθελα και κατι ακομα αν αυτη η καρτα ειναι συμβατη με το back track 3 δηλαδη αν μπορω να σπασω καπιο wireless?
Σας ευχαριρτω εκ των προτερων......... Οπιος μπορει να βοηθησει τα το εκτημουσα παρα πολλη.

[linuxman]

Για τα σπασίματα κτλ δεν ξέρω αν πάρεις απάντηση για τον απλό λόγο επειδή είναι παράνομη ενέργεια , όσο για την κάρτα σου δώσε αποτέλεσμα τις εντολής

Κώδικας: Επιλογή όλων

lspci -nn

και

Κώδικας: Επιλογή όλων

lsusb

και βλέπουμε .
Και πως έκανες την εγκατάσταση μέσα απο τα παράθυρα η κανονικά με boot cd .

[logari81]

γεια σου,
το οτι δεν εχεις wireless δεν σημαινει ότι σου λειπουνε drivers, η συγκεκριμενη καρτα (οπως και οι περισσοτερες καρτες) δουλευει κατευθειαν χωρις να κανεις τιποτα (έχω την ιδια καρτα στο λαπτοπ μου). Βγαλε οτι εβαλες που να εχει σχεση με το nd_sw_ap_er (το οποιο δεν ειναι παρα ενα πολυ μεγαλο spam σε ολα τα φορουμ), κανε επανεκκίνηση και δωσε μας αυτα που ζητησε ο linuxman καθως και τα αποτελεσματα των

Κώδικας: Επιλογή όλων

dmesg
iwconfig
sudo iwlist scan

[darkaccess]

Γεια σας και παλι λοιπον εκανα αυτα που ειπατε:
Απο την πρωτη εντολη:lspci -nn

Κώδικας: Επιλογή όλων

00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
06:01.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56]
06:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
06:08.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)


Απο την δευτερη lsusb:

Κώδικας: Επιλογή όλων

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0204:6025 Chipsbank Microelectronics Co., Ltd CBM2080 Flash drive controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Απο την τριτη dmesg:

Κώδικας: Επιλογή όλων

[ 0.996388] pci 0000:00:1e.0: transparent bridge
[ 0.996393] PCI: bridge 0000:00:1e.0 io port: [2000, 2fff]
[ 0.996398] PCI: bridge 0000:00:1e.0 32bit mmio: [b0100000, b01fffff]
[ 0.996451] bus 00 -> node 0
[ 0.996459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.996921] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.997090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.997259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.997564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 1.005593] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.005725] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.005855] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.005985] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.006113] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.006240] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.006371] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.006499] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.006758] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.006795] pnp: PnP ACPI init
[ 1.006803] ACPI: bus type pnp registered
[ 1.008438] pnp 00:05: io resource (0x2e-0x2f) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[ 1.008443] pnp 00:05: io resource (0x4e-0x4f) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[ 1.008447] pnp 00:05: io resource (0x61-0x61) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[ 1.008451] pnp 00:05: io resource (0x63-0x63) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[ 1.008454] pnp 00:05: io resource (0x65-0x65) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[ 1.008458] pnp 00:05: io resource (0x67-0x67) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[ 1.008462] pnp 00:05: io resource (0x68-0x6f) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[ 1.008466] pnp 00:05: io resource (0x70-0x70) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[ 1.008470] pnp 00:05: io resource (0x80-0x80) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[ 1.008474] pnp 00:05: io resource (0x92-0x92) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[ 1.008478] pnp 00:05: io resource (0xb2-0xb3) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[ 1.008482] pnp 00:05: io resource (0x680-0x6ff) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[ 1.008486] pnp 00:05: io resource (0x800-0x80f) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[ 1.008491] pnp 00:05: io resource (0x2e-0x2f) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[ 1.008495] pnp 00:05: io resource (0x4e-0x4f) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[ 1.008499] pnp 00:05: io resource (0x61-0x61) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[ 1.008503] pnp 00:05: io resource (0x63-0x63) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[ 1.008506] pnp 00:05: io resource (0x65-0x65) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[ 1.008510] pnp 00:05: io resource (0x67-0x67) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[ 1.008514] pnp 00:05: io resource (0x68-0x6f) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[ 1.008518] pnp 00:05: io resource (0x70-0x70) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[ 1.008522] pnp 00:05: io resource (0x80-0x80) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[ 1.008526] pnp 00:05: io resource (0x92-0x92) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[ 1.008530] pnp 00:05: io resource (0xb2-0xb3) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[ 1.008534] pnp 00:05: io resource (0x680-0x6ff) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[ 1.008538] pnp 00:05: io resource (0x800-0x80f) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[ 1.008542] pnp 00:05: io resource (0x2e-0x2f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[ 1.008546] pnp 00:05: io resource (0x4e-0x4f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[ 1.008550] pnp 00:05: io resource (0x61-0x61) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[ 1.008554] pnp 00:05: io resource (0x63-0x63) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[ 1.008558] pnp 00:05: io resource (0x65-0x65) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[ 1.008562] pnp 00:05: io resource (0x67-0x67) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[ 1.008566] pnp 00:05: io resource (0x68-0x6f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[ 1.008570] pnp 00:05: io resource (0x70-0x70) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[ 1.008573] pnp 00:05: io resource (0x80-0x80) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[ 1.008577] pnp 00:05: io resource (0x92-0x92) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[ 1.008581] pnp 00:05: io resource (0xb2-0xb3) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[ 1.008585] pnp 00:05: io resource (0x680-0x6ff) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[ 1.008589] pnp 00:05: io resource (0x800-0x80f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[ 1.008976] pnp: PnP ACPI: found 9 devices
[ 1.008978] ACPI: ACPI bus type pnp unregistered
[ 1.008982] PnPBIOS: Disabled by ACPI PNP
[ 1.009327] PCI: Using ACPI for IRQ routing
[ 1.009332] pci 0000:00:1c.0: BAR 7: can't allocate resource
[ 1.009335] pci 0000:00:1c.0: BAR 8: can't allocate resource
[ 1.009337] pci 0000:00:1c.0: BAR 9: can't allocate resource
[ 1.009340] pci 0000:00:1c.1: BAR 7: can't allocate resource
[ 1.009342] pci 0000:00:1c.1: BAR 8: can't allocate resource
[ 1.009345] pci 0000:00:1c.1: BAR 9: can't allocate resource
[ 1.009347] pci 0000:00:1c.2: BAR 7: can't allocate resource
[ 1.009350] pci 0000:00:1c.2: BAR 8: can't allocate resource
[ 1.009352] pci 0000:00:1c.2: BAR 9: can't allocate resource
[ 1.009488] NET: Registered protocol family 8
[ 1.009488] NET: Registered protocol family 20
[ 1.009488] NetLabel: Initializing
[ 1.009488] NetLabel: domain hash size = 128
[ 1.009488] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.009488] NetLabel: unlabeled traffic allowed by default
[ 1.009488] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.009488] hpet0: 3 64-bit timers, 14318180 Hz
[ 1.009686] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 1.009689] actual entries 65620
[ 1.009785] AppArmor: AppArmor Filesystem Enabled
[ 1.009816] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 1.009816] system 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved
[ 1.009816] system 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved
[ 1.009816] system 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved
[ 1.009816] system 00:01: iomem range 0xf0008000-0xf000bfff could not be reserved
[ 1.009816] system 00:01: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 1.009816] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 1.009816] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 1.009816] system 00:05: ioport range 0x1600-0x167f has been reserved
[ 1.012044] Switched to high resolution mode on CPU 0
[ 1.046452] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09
[ 1.046455] pci 0000:00:1c.0: IO window: disabled
[ 1.046461] pci 0000:00:1c.0: MEM window: disabled
[ 1.046466] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.046474] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0a
[ 1.046476] pci 0000:00:1c.1: IO window: disabled
[ 1.046483] pci 0000:00:1c.1: MEM window: disabled
[ 1.046488] pci 0000:00:1c.1: PREFETCH window: disabled
[ 1.046496] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[ 1.046498] pci 0000:00:1c.2: IO window: disabled
[ 1.046504] pci 0000:00:1c.2: MEM window: disabled
[ 1.046509] pci 0000:00:1c.2: PREFETCH window: disabled
[ 1.046520] pci 0000:06:01.0: CardBus bridge, secondary bus 0000:07
[ 1.046523] pci 0000:06:01.0: IO window: 0x002400-0x0024ff
[ 1.046529] pci 0000:06:01.0: IO window: 0x002800-0x0028ff
[ 1.046535] pci 0000:06:01.0: PREFETCH window: 0x50000000-0x53ffffff
[ 1.046541] pci 0000:06:01.0: MEM window: 0x58000000-0x5bffffff
[ 1.046547] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 1.046551] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 1.046558] pci 0000:00:1e.0: MEM window: 0xb0100000-0xb01fffff
[ 1.046563] pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x00000053ffffff
[ 1.046582] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.046589] pci 0000:00:1c.0: setting latency timer to 64
[ 1.046599] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.046606] pci 0000:00:1c.1: setting latency timer to 64
[ 1.046615] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.046622] pci 0000:00:1c.2: setting latency timer to 64
[ 1.046630] pci 0000:00:1e.0: setting latency timer to 64
[ 1.046641] pci 0000:06:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.046647] bus: 00 index 0 io port: [0, ffff]
[ 1.046650] bus: 00 index 1 mmio: [0, ffffffff]
[ 1.046652] bus: 09 index 0 mmio: [0, fff]
[ 1.046655] bus: 09 index 1 mmio: [0, fffff]
[ 1.046657] bus: 09 index 2 mmio: [0, fffff]
[ 1.046659] bus: 09 index 3 mmio: [0, 0]
[ 1.046661] bus: 0a index 0 mmio: [0, fff]
[ 1.046663] bus: 0a index 1 mmio: [0, fffff]
[ 1.046666] bus: 0a index 2 mmio: [0, fffff]
[ 1.046668] bus: 0a index 3 mmio: [0, 0]
[ 1.046670] bus: 02 index 0 mmio: [0, fff]
[ 1.046672] bus: 02 index 1 mmio: [0, fffff]
[ 1.046674] bus: 02 index 2 mmio: [0, fffff]
[ 1.046676] bus: 02 index 3 mmio: [0, 0]
[ 1.046679] bus: 06 index 0 io port: [2000, 2fff]
[ 1.046681] bus: 06 index 1 mmio: [b0100000, b01fffff]
[ 1.046684] bus: 06 index 2 mmio: [50000000, 53ffffff]
[ 1.046686] bus: 06 index 3 io port: [0, ffff]
[ 1.046689] bus: 06 index 4 mmio: [0, ffffffff]
[ 1.046691] bus: 07 index 0 io port: [2400, 24ff]
[ 1.046693] bus: 07 index 1 io port: [2800, 28ff]
[ 1.046696] bus: 07 index 2 mmio: [50000000, 53ffffff]
[ 1.046698] bus: 07 index 3 mmio: [58000000, 5bffffff]
[ 1.046707] NET: Registered protocol family 2
[ 1.046844] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.047095] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.047785] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.048279] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.048284] TCP reno registered
[ 1.048437] NET: Registered protocol family 1
[ 1.048580] checking if image is initramfs... it is
[ 1.842306] Freeing initrd memory: 8015k freed
[ 1.842544] Simple Boot Flag at 0x36 set to 0x1
[ 1.843066] audit: initializing netlink socket (disabled)
[ 1.843087] type=2000 audit(1234906263.840:1): initialized
[ 1.850190] highmem bounce pool size: 64 pages
[ 1.850198] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.852665] VFS: Disk quotas dquot_6.5.1
[ 1.852763] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.852887] msgmni has been set to 1762
[ 1.853025] io scheduler noop registered
[ 1.853029] io scheduler anticipatory registered
[ 1.853032] io scheduler deadline registered
[ 1.853045] io scheduler cfq registered (default)
[ 1.853063] pci 0000:00:02.0: Boot video device
[ 1.853270] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.853316] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.853365] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.853410] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.853450] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.853553] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.853598] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.853641] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.853683] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.853726] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.853829] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.853873] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.853917] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.853957] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.853997] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.854338] isapnp: Scanning for PnP cards...
[ 2.208283] isapnp: No Plug & Play device found
[ 2.244765] hpet_resources: 0xfed00000 is busy
[ 2.244844] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.247105] brd: module loaded
[ 2.247187] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.247318] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.250920] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.250926] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.251229] mice: PS/2 mouse device common for all mice
[ 2.251368] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.251400] rtc0: alarms up to one month, y3k, hpet irqs
[ 2.251517] EISA: Probing bus 0 at eisa.0
[ 2.251525] Cannot allocate resource for EISA slot 1
[ 2.251528] Cannot allocate resource for EISA slot 2
[ 2.251552] EISA: Detected 0 cards.
[ 2.251556] cpuidle: using governor ladder
[ 2.251559] cpuidle: using governor menu
[ 2.252117] TCP cubic registered
[ 2.252152] Using IPI No-Shortcut mode
[ 2.252347] registered taskstats version 1
[ 2.252466] Magic number: 13:956:550
[ 2.252593] pci_link PNP0C0F:01: hash matches
[ 2.252630] rtc_cmos 00:06: setting system clock to 2009-02-17 21:31:05 UTC (1234906265)
[ 2.252634] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.252636] EDD information not available.
[ 2.252900] Freeing unused kernel memory: 424k freed
[ 2.252953] Write protecting the kernel text: 2580k
[ 2.252995] Write protecting the kernel read-only data: 940k
[ 2.283491] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.508035] fuse init (API version 7.9)
[ 2.796009] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 2.797022] processor ACPI0007:00: registered as cooling_device0
[ 2.797027] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.802398] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.808107] ACPI: Thermal Zone [THRM] (36 C)
[ 3.470370] usbcore: registered new interface driver usbfs
[ 3.470399] usbcore: registered new interface driver hub
[ 3.470435] usbcore: registered new device driver usb
[ 3.476232] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.476247] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.476251] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.476298] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.480209] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.480216] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.480231] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0040000
[ 3.496095] USB Universal Host Controller Interface driver v3.0
[ 3.516010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.516195] usb usb1: configuration #1 chosen from 1 choice
[ 3.516226] hub 1-0:1.0: USB hub found
[ 3.516235] hub 1-0:1.0: 8 ports detected
[ 3.526515] 8139too Fast Ethernet driver 0.9.28
[ 3.535585] No dock devices found.
[ 3.564426] SCSI subsystem initialized
[ 3.620328] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.620339] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.620344] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.620371] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.620400] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 3.620506] usb usb2: configuration #1 chosen from 1 choice
[ 3.620535] hub 2-0:1.0: USB hub found
[ 3.620543] hub 2-0:1.0: 2 ports detected
[ 3.620848] libata version 3.00 loaded.
[ 3.724356] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.724368] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.724372] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.724399] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.724436] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 3.724538] usb usb3: configuration #1 chosen from 1 choice
[ 3.724571] hub 3-0:1.0: USB hub found
[ 3.724578] hub 3-0:1.0: 2 ports detected
[ 3.828300] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.828312] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.828316] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.828343] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.828380] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 3.828483] usb usb4: configuration #1 chosen from 1 choice
[ 3.828512] hub 4-0:1.0: USB hub found
[ 3.828519] hub 4-0:1.0: 2 ports detected
[ 3.932312] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.932323] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.932327] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.932354] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.932392] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 3.932495] usb usb5: configuration #1 chosen from 1 choice
[ 3.932525] hub 5-0:1.0: USB hub found
[ 3.932533] hub 5-0:1.0: 2 ports detected
[ 4.028162] Marking TSC unstable due to TSC halts in idle
[ 4.036354] 8139too 0000:06:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.037277] eth0: RealTek RTL8139 at 0x2000, 00:16:36:04:a1:79, IRQ 16
[ 4.037280] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 4.041955] ata_piix 0000:00:1f.1: version 2.12
[ 4.041965] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.042005] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4.042082] scsi0 : ata_piix
[ 4.042235] scsi1 : ata_piix
[ 4.042399] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 4.042402] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 4.042643] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.212851] ata1.00: ATA-6: ST9808210A, 3.01, max UDMA/100
[ 4.212856] ata1.00: 156301488 sectors, multi 16: LBA48
[ 4.212884] ata1.01: ATAPI: MATSHITAUJ-840D, 1.00, max UDMA/33
[ 4.228910] ata1.00: configured for UDMA/100
[ 4.244570] ata1.01: configured for UDMA/33
[ 4.244613] ata2: port disabled. ignoring.
[ 4.244730] scsi 0:0:0:0: Direct-Access ATA ST9808210A 3.01 PQ: 0 ANSI: 5
[ 4.246911] scsi 0:0:1:0: CD-ROM MATSHITA UJ-840D 1.00 PQ: 0 ANSI: 5
[ 4.265275] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.265315] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 4.287287] Driver 'sd' needs updating - please use bus_type methods
[ 4.289357] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 4.289375] sd 0:0:0:0: [sda] Write Protect is off
[ 4.289378] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.289404] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.289476] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 4.289491] sd 0:0:0:0: [sda] Write Protect is off
[ 4.289494] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.289520] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.289524] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 4.307982] sda1 sda2 < sda5 >
[ 4.332402] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.340750] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.340755] Uniform CD-ROM driver Revision: 3.20
[ 4.340840] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 4.500028] Clocksource tsc unstable (delta = -673057110 ns)
[ 4.629469] PM: Starting manual resume from disk
[ 4.629473] PM: Resume from partition 8:5
[ 4.629476] PM: Checking hibernation image.
[ 4.629654] PM: Resume from disk failed.
[ 4.695371] kjournald starting. Commit interval 5 seconds
[ 4.695383] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.797851] udevd version 124 started
[ 13.585244] Linux agpgart interface v0.103
[ 13.640474] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 13.640850] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 13.840656] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 13.872327] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.947615] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.324232] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 14.336024] ACPI: Power Button (FF) [PWRF]
[ 14.336150] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 14.336258] ACPI: Lid Switch [LID]
[ 14.336330] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 14.352022] ACPI: Power Button (CM) [PWRB]
[ 14.352130] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 14.368014] ACPI: Sleep Button (CM) [SLPB]
[ 14.396196] ACPI: AC Adapter [ACAD] (on-line)
[ 14.572278] ACPI: Battery Slot [BAT1] (battery absent)
[ 15.037116] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
[ 15.052028] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 15.521601] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.521625] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.312515] intel_rng: FWH not detected
[ 16.416144] iTCO_vendor_support: vendor-support=0
[ 16.454945] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 16.455059] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 16.455207] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.547780] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 16.716883] ieee80211_crypt: registered algorithm 'NULL'
[ 16.744468] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 16.744473] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 16.781927] Yenta: CardBus bridge found at 0000:06:01.0 [1025:008f]
[ 16.781951] Yenta: Enabling burst memory read transactions
[ 16.781957] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 16.781960] Yenta: Routing CardBus interrupts to PCI
[ 16.781966] Yenta TI: socket 0000:06:01.0, mfunc 0x01111112, devctl 0x66
[ 16.855364] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 16.855368] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 17.012817] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
[ 17.012822] Socket status: 30000007
[ 17.012826] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #08
[ 17.012833] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 17.012837] cs: IO port probe 0x2000-0x2fff: clean.
[ 17.013072] pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff
[ 17.013076] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 17.032291] ipw2200 0000:06:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.048555] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 17.048609] firmware: requesting ipw2200-bss.fw
[ 17.169284] ACPI: WMI: Mapper loaded
[ 17.221786] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 17.221804] acer-wmi: No or unsupported WMI interface, unable to load
[ 17.407300] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 17.443441] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 18.568788] ipw2200: Radio Frequency Kill Switch is On:
[ 18.568792] Kill switch must be turned off for wireless networking to work.
[ 18.581355] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 18.911997] cs: IO port probe 0x100-0x3af: clean.
[ 18.913728] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 18.914453] cs: IO port probe 0x820-0x8ff: clean.
[ 18.915051] cs: IO port probe 0xc00-0xcf7: clean.
[ 18.915814] cs: IO port probe 0xa00-0xaff: clean.
[ 19.695038] lp: driver loaded but no devices found
[ 19.929435] Adding 2996080k swap on /dev/sda5. Priority:-1 extents:1 across:2996080k
[ 20.478680] EXT3 FS on sda1, internal journal
[ 21.615949] type=1505 audit(1234906285.070:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3907
[ 21.684416] type=1505 audit(1234906285.142:3): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=3912
[ 21.901565] type=1505 audit(1234906285.358:4): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3916
[ 21.901855] type=1505 audit(1234906285.358:5): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3916
[ 22.042277] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.876860] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 23.962477] apm: BIOS not found.
[ 25.589000] ppdev: user-space parallel port driver
[ 30.018507] Bluetooth: Core ver 2.13
[ 30.032654] NET: Registered protocol family 31
[ 30.032661] Bluetooth: HCI device and connection manager initialized
[ 30.032666] Bluetooth: HCI socket layer initialized
[ 30.063536] Bluetooth: L2CAP ver 2.11
[ 30.063544] Bluetooth: L2CAP socket layer initialized
[ 30.080115] Bluetooth: SCO (Voice Link) ver 0.6
[ 30.080123] Bluetooth: SCO socket layer initialized
[ 30.096849] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.096854] Bluetooth: BNEP filters: protocol multicast
[ 30.132162] Bridge firewalling registered
[ 30.252027] Bluetooth: RFCOMM socket layer initialized
[ 30.252507] Bluetooth: RFCOMM TTY layer initialized
[ 30.252512] Bluetooth: RFCOMM ver 1.10
[ 34.380435] eth0: link down
[ 34.774024] [drm] Initialized drm 1.1.0 20060810
[ 34.780436] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 34.780444] pci 0000:00:02.0: setting latency timer to 64
[ 34.781588] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 86.152171] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 86.299790] usb 1-3: configuration #1 chosen from 1 choice
[ 86.478599] usbcore: registered new interface driver libusual
[ 86.506292] Initializing USB Mass Storage driver...
[ 86.507609] scsi2 : SCSI emulation for USB Mass Storage devices
[ 86.508160] usbcore: registered new interface driver usb-storage
[ 86.508322] USB Mass Storage support registered.
[ 86.508550] usb-storage: device found at 2
[ 86.508553] usb-storage: waiting for device to settle before scanning
[ 87.298856] synaptics: using relaxed packet validation
[ 91.514420] usb-storage: device scan complete
[ 91.516294] scsi 2:0:0:0: Direct-Access USB 2.0 Flash Disk 5.00 PQ: 0 ANSI: 2
[ 91.534129] sd 2:0:0:0: [sdb] 2047488 2048-byte hardware sectors (4193 MB)
[ 91.535873] sd 2:0:0:0: [sdb] Write Protect is off
[ 91.535882] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 91.535889] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 91.538122] sd 2:0:0:0: [sdb] 2047488 2048-byte hardware sectors (4193 MB)
[ 91.539754] sd 2:0:0:0: [sdb] Write Protect is off
[ 91.539763] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 91.539769] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 91.542366] sdb: sdb1
[ 91.544164] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 91.544726] sd 2:0:0:0: Attached scsi generic sg2 type 0

Απο την τεταρτη iwconfig:

Κώδικας: Επιλογή όλων

lo no wireless extensions.

eth0 no wireless extensions.

eth1 radio off ESSID:off/any
Mode:Managed Channel:0 Access Point: Not-Associated
Bit Rate:0 kb/s Tx-Power=off Sensitivity=8/0
Retry limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

pan0 no wireless extensions.

Και τελος sudo iwlist scan:

Κώδικας: Επιλογή όλων

lo no wireless extensions.

eth0 no wireless extensions.

eth1 radio off ESSID:off/any
Mode:Managed Channel:0 Access Point: Not-Associated
Bit Rate:0 kb/s Tx-Power=off Sensitivity=8/0
Retry limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

pan0 no wireless extensions.

Οχι οτι καταλαβα πολλα.Τωρα μπορειτε να με βοηθησετε?
Και οσο για το σπασιμο τον κωδικων το ηθελα για προσωπικη χρηση για να δω αν σπαει ο δικος μου κωδικος απο το wi-fi τωρα μπορειτε να μην με πιστευται αλλα ετσι ειναι καπιος μου περνει internet ετσι τουλαχιστον δειχενει το λαμπακι.Ηθελα να μου πειτε μονο αν ειναι συμβατη με το back track 3.
Εγκατασταση εκανα μαλλον απο το boot εβαλα το cd και εκανα εγκατασταση οπως ελεγε....δεν ξερω αν εγινα σαφης.

[darkaccess]

Τιποτα κανεις?

[logari81]

την καρτα σου την βλεπει κανονικα, το μονο παραξενο ειναι το radio off που αναφερεται στο τελευταιο αποτελεσμα. Μαλλον υπαρχει καποιο κουμπι στο λαπτοπ σου που ανοιγει/κλεινει το ασυρματο. Το δοκιμασες;

[darkaccess]

Λοιπον φιλε logari81ειμαι μαγκας και εγω μα..... ειχα ξεχασει οτι υπαρχει και το κουμπι μολις το δοκιμασα και ειναι ολα ενταξει.Σε ευχαριστω και εσενα και ολους.